The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
Long-life Li/polysulphide batteries with high sulphur loading enabled by lightweight three-dimensional nitrogen/sulphur-codoped graphene sponge
Open accessAbstract
Lithium–sulphur batteries with a high theoretical energy density are regarded as promising energy storage devices for electric vehicles and large-scale electricity storage. However, the low active material utilization, low sulphur loading and poor cycling stability restrict their practical applications. Herein, we present an effective strategy to obtain Li/polysulphide batteries with high-energy density and long-cyclic life using three-dimensional nitrogen/sulphur codoped graphene sponge electrodes. The nitrogen/sulphur codoped graphene sponge electrode provides enough space for a high sulphur loading, facilitates fast charge transfer and better immobilization of polysulphide ions. The hetero-doped nitrogen/sulphur sites are demonstrated to show strong binding energy and be capable of anchoring polysulphides based on first-principles calculations. As a result, a high specific capacity of 1,200 mAh g−1 at 0.2C rate, a high-rate capacity of 430 mAh g−1 at 2C rate and excellent cycling stability for 500 cycles with ∼0.078% capacity decay per cycle are achieved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Semiempirical GGA‐type density functional constructed with a long‐range dispersion correction
Grimme, S. (2006) · Journal of Computational Chemistry · doi:10.1002/jcc.20495 · Cited by 31,038
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide
Stankovich, S., Dikin, D. A., Piner, R. D., Kohlhaas, K. A., Kleinhammes, A., Jia, Y., Wu, Y., Nguyen, S. T., & Ruoff, R. S. (2007) · Carbon · doi:10.1016/j.carbon.2007.02.034 · Cited by 13,878
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
The reduction of graphene oxide
Pei, S., & Cheng, H.-M. (2012) · Carbon · doi:10.1016/j.carbon.2011.11.010 · Cited by 5,164
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Self-citationLithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Self-citationDesigning high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Tao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391
Self-citationMetal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Catalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Self-citationSun, Z., Zhang, J., Yin, L., Hu, G., Fang, R., Cheng, H.-M., & Li, F. (2017) · Nature Communications · doi:10.1038/ncomms14627 · Cited by 1,135
Defect Engineering on Electrode Materials for Rechargeable Batteries
Zhang, Y., Tao, L., Xie, C., Wang, D., Zou, Y., Chen, R., Wang, Y., Jia, C., & Wang, S. (2020) · Advanced Materials · doi:10.1002/adma.201905923 · Cited by 1,019
Transition metal nitrides for electrochemical energy applications
Wang, H., Li, J., Li, K., Lin, Y., Chen, J., Gao, L., Nicolosi, V., Xiao, X., & Lee, J.-M. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00415d · Cited by 983
Formulating energy density for designing practical lithium–sulfur batteries
Zhou, G., Chen, H., & Cui, Y. (2022) · Nature Energy · doi:10.1038/s41560-022-01001-0 · Cited by 983
Self-citationNitrogen-doped carbon materials
Inagaki, M., Toyoda, M., Soneda, Y., & Morishita, T. (2018) · Carbon · doi:10.1016/j.carbon.2018.02.024 · Cited by 867
Graphene aerogels for efficient energy storage and conversion
Mao, J., Iocozzia, J., Huang, J., Meng, K., Lai, Y., & Lin, Z. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03031b · Cited by 868
Advanced Architectures and Relatives of Air Electrodes in Zn–Air Batteries
Pan, J., Xu, Y. Y., Yang, H., Dong, Z., Liu, H., & Xia, B. Y. (2018) · Advanced Science · doi:10.1002/advs.201700691 · Cited by 848
A fundamental look at electrocatalytic sulfur reduction reaction
Peng, L., Wei, Z., Wan, C., Li, J., Chen, Z., Zhu, D., Baumann, D., Liu, H., Allen, C. S., Xu, X., et al. (2020) · Nature Catalysis · doi:10.1038/s41929-020-0498-x · Cited by 841
Feng, X., Bai, Y., Liu, M., Li, Y., Yang, H., Wang, X., & Wu, C. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00166c · Cited by 761
Zhang, L., Liu, D., Muhammad, Z., Wan, F., Xie, W., Wang, Y., Song, L., Niu, Z., & Chen, J. (2019) · Advanced Materials · doi:10.1002/adma.201903955 · Cited by 713
Revisiting the Role of Polysulfides in Lithium–Sulfur Batteries
Li, G., Wang, S., Zhang, Y., Li, M., Chen, Z., & Lu, J. (2018) · Advanced Materials · doi:10.1002/adma.201705590 · Cited by 711
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
A sulfur host based on titanium monoxide@carbon hollow spheres for advanced lithium–sulfur batteries
Li, Z., Zhang, J., Guan, B., Wang, D., Liu, L.-M., & Lou, X. W. (2016) · Nature Communications · doi:10.1038/ncomms13065 · Cited by 677
Huang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium–Sulfur Batteries
Peng, H., Zhang, G., Chen, X., Zhang, Z., Xu, W., Huang, J., & Zhang, Q. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605676 · Cited by 649
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Self-citationThe Regulating Role of Carbon Nanotubes and Graphene in Lithium‐Ion and Lithium–Sulfur Batteries
Fang, R., Chen, K., Yin, L., Sun, Z., Li, F., & Cheng, H. (2019) · Advanced Materials · doi:10.1002/adma.201800863 · Cited by 617
Zhou, G., Zhao, S., Wang, T., Yang, S.-Z., Johannessen, B., Chen, H., Liu, C., Ye, Y., Wu, Y., Peng, Y., et al. (2020) · Nano Letters · doi:10.1021/acs.nanolett.9b04719 · Cited by 605
Self-citationHe, J., Hartmann, G., Lee, M., Hwang, G. S., Chen, Y., & Manthiram, A. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03252a · Cited by 589
Self-citationA Cooperative Interface for Highly Efficient Lithium–Sulfur Batteries
Peng, H., Zhang, Z., Huang, J., Zhang, G., Xie, J., Xu, W., Shi, J., Chen, X., Cheng, X., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201603401 · Cited by 583
Gopalakrishnan, A., & Badhulika, S. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228830 · Cited by 583
Establishing reaction networks in the 16-electron sulfur reduction reaction
Liu, R., Wei, Z., Peng, L., Zhang, L., Zohar, A., Schoeppner, R., Wang, P., Wan, C., Zhu, D., Liu, H., et al. (2024) · Nature · doi:10.1038/s41586-023-06918-4 · Cited by 573
Zhang, J., Hu, H., Li, Z., & Lou, X. W. (. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511632 · Cited by 560
Pei, F., An, T., Zang, J., Zhao, X., Fang, X., Zheng, M., Dong, Q., & Zheng, N. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502539 · Cited by 555
Niu, F., Yang, J., Wang, N., Zhang, D., Fan, W., Yang, J., & Qian, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700522 · Cited by 543
3D Interconnected Electrode Materials with Ultrahigh Areal Sulfur Loading for Li–S Batteries
Fang, R., Zhao, S., Hou, P., Cheng, M., Wang, S., Cheng, H., Liu, C., & Li, F. (2016) · Advanced Materials · doi:10.1002/adma.201506014 · Cited by 532
Host Materials Anchoring Polysulfides in Li–S Batteries Reviewed
Zhou, L., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202001304 · Cited by 516
Chen, T., Zhang, Z., Cheng, B., Chen, R., Hu, Y., Ma, L., Zhu, G., Liu, J., & Jin, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06973 · Cited by 502
A review on the status and challenges of electrocatalysts in lithium-sulfur batteries
He, J., & Manthiram, A. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.04.038 · Cited by 479
Self-citationA Review of the Design of Advanced Binders for High‐Performance Batteries
Zou, F., & Manthiram, A. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002508 · Cited by 465
Self-citationCarbon nanomaterials for advanced lithium sulfur batteries
Xu, Z.-L., Kim, J.-K., & Kang, K. (2018) · Nano Today · doi:10.1016/j.nantod.2018.02.006 · Cited by 454
Emerging Catalysts to Promote Kinetics of Lithium–Sulfur Batteries
Wang, P., Xi, B., Huang, M., Chen, W., Feng, J., & Xiong, S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002893 · Cited by 451
Chen, X., Hou, T., Persson, K. A., & Zhang, Q. (2019) · Materials Today · doi:10.1016/j.mattod.2018.04.007 · Cited by 446
A Two-Dimensional Porous Carbon-Modified Separator for High-Energy-Density Li-S Batteries
Pei, F., Lin, L., Fu, A., Mo, S., Ou, D., Fang, X., & Zheng, N. (2018) · Joule · doi:10.1016/j.joule.2017.12.003 · Cited by 442
Recent advances in shuttle effect inhibition for lithium sulfur batteries
Ren, W., Ma, W., Zhang, S., & Tang, B. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.022 · Cited by 434
Graphene-based materials for electrochemical energy storage devices: Opportunities and challenges
Lv, W., Li, Z., Deng, Y., Yang, Q.-H., & Kang, F. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.10.002 · Cited by 433
A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteries
Pang, Q., Kundu, D., & Nazar, L. F. (2016) · Materials Horizons · doi:10.1039/c5mh00246j · Cited by 424
Zhang, B.-W., Sheng, T., Liu, Y.-D., Wang, Y.-X., Zhang, L., Lai, W.-H., Wang, L., Yang, J., Gu, Q.-F., Chou, S.-L., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-06144-x · Cited by 414
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0010-3 · Cited by 411
Stabilized Li3N for efficient battery cathode prelithiation
Sun, Y., Li, Y., Sun, J., Li, Y., Pei, A., & Cui, Y. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.10.004 · Cited by 402
Strategies toward High‐Loading Lithium–Sulfur Battery
Hu, Y., Chen, W., Lei, T., Jiao, Y., Huang, J., Hu, A., Gong, C., Yan, C., Wang, X., & Xiong, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000082 · Cited by 402
A review of recent developments in rechargeable lithium–sulfur batteries
Kang, W., Deng, N., Ju, J., Li, Q., Wu, D., Ma, X., Li, L., Naebe, M., & Cheng, B. (2016) · Nanoscale · doi:10.1039/c6nr04923k · Cited by 391
Propelling polysulfides transformation for high-rate and long-life lithium–sulfur batteries
Zheng, C., Niu, S., Lv, W., Zhou, G., Li, J., Fan, S., Deng, Y., Pan, Z., Li, B., Kang, F., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.040 · Cited by 391
Self-citationEmergent Pseudocapacitance of 2D Nanomaterials
Yu, X., Yun, S., Yeon, J. S., Bhattacharya, P., Wang, L., Lee, S. W., Hu, X., & Park, H. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702930 · Cited by 387
Graphene‐Based Nanocomposites for Energy Storage
Ji, L., Meduri, P., Agubra, V., Xiao, X., & Alcoutlabi, M. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502159 · Cited by 385
Carbon-based functional nanomaterials: Preparation, properties and applications
Li, Z., Wang, L., Li, Y., Feng, Y., & Feng, W. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.04.028 · Cited by 384
Phosphorene as a Polysulfide Immobilizer and Catalyst in High‐Performance Lithium–Sulfur Batteries
Li, L., Chen, L., Mukherjee, S., Gao, J., Sun, H., Liu, Z., Ma, X., Gupta, T., Singh, C. V., Ren, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201602734 · Cited by 364
Wang, X., Li, G., Li, J., Zhang, Y., Wook, A., Yu, A., & Chen, Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00194g · Cited by 360
Zhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
A review on theoretical models for lithium–sulfur battery cathodes
Feng, S., Fu, Z., Chen, X., & Zhang, Q. (2022) · InfoMat · doi:10.1002/inf2.12304 · Cited by 354
A Review of Heteroatom Doped Materials for Advanced Lithium–Sulfur Batteries
Wang, J., & Han, W. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202107166 · Cited by 351
Exploiting a robust biopolymer network binder for an ultrahigh-areal-capacity Li–S battery
Liu, J., Galpaya, D. G. D., Yan, L., Sun, M., Lin, Z., Yan, C., Liang, C., & Zhang, S. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03033e · Cited by 347
Cao, J., Chen, C., Zhao, Q., Zhang, N., Lu, Q., Wang, X., Niu, Z., & Chen, J. (2016) · Advanced Materials · doi:10.1002/adma.201602262 · Cited by 339
Chen, X., Peng, L., Wang, L., Yang, J., Hao, Z., Xiang, J., Yuan, K., Huang, Y., Shan, B., Yuan, L., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08818-6 · Cited by 328
Pei, F., Lin, L., Ou, D., Zheng, Z., Mo, S., Fang, X., & Zheng, N. (2017) · Nature Communications · doi:10.1038/s41467-017-00575-8 · Cited by 324
Xu, J., Ma, J., Fan, Q., Guo, S., & Dou, S. (2017) · Advanced Materials · doi:10.1002/adma.201606454 · Cited by 319
The recent progress of nitrogen-doped carbon nanomaterials for electrochemical batteries
Wu, J., Pan, Z., Zhang, Y., Wang, B., & Peng, H. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03968b · Cited by 318
Zhang, B., Luo, C., Deng, Y., Huang, Z., Zhou, G., Lv, W., He, Y., Wan, Y., Kang, F., & Yang, Q. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000091 · Cited by 317
Self-citationLei, J., Fan, X.-X., Liu, T., Xu, P., Hou, Q., Li, K., Yuan, R.-M., Zheng, M.-S., Dong, Q.-F., & Chen, J.-J. (2022) · Nature Communications · doi:10.1038/s41467-021-27866-5 · Cited by 308
Rana, M., Ahad, S. A., Li, M., Luo, B., Wang, L., Gentle, I., & Knibbe, R. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.12.024 · Cited by 301
Song, J., Guo, X., Zhang, J., Chen, Y., Zhang, C., Luo, L., Wang, F., & Wang, G. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00212j · Cited by 301
Yuan, H., Chen, X., Zhou, G., Zhang, W., Luo, J., Huang, H., Gan, Y., Liang, C., Xia, Y., Zhang, J., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00465 · Cited by 296
Self-citationA Compact Nanoconfined Sulfur Cathode for High-Performance Lithium-Sulfur Batteries
Li, Z., Guan, B. Y., Zhang, J., & Lou, X. W. (. (2017) · Joule · doi:10.1016/j.joule.2017.06.003 · Cited by 295
Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms
Yao, W., Liao, K., Lai, T., Sul, H., & Manthiram, A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00919 · Cited by 287
Self-citationLi, G., Wang, X., Seo, M. H., Li, M., Ma, L., Yuan, Y., Wu, T., Yu, A., Wang, S., Lu, J., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03116-z · Cited by 267
Advances in High Sulfur Loading Cathodes for Practical Lithium‐Sulfur Batteries
Wang, M., Bai, Z., Yang, T., Nie, C., Xu, X., Wang, Y., Yang, J., Dou, S., & Wang, N. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201585 · Cited by 266
Zheng, Z.-J., Ye, H., & Guo, Z.-P. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03181j · Cited by 263
Hierarchical Structures Based on Two‐Dimensional Nanomaterials for Rechargeable Lithium Batteries
Cong, L., Xie, H., & Li, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601906 · Cited by 261
Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode
Zhao, C.-Z., Cheng, X.-B., Zhang, R., Peng, H.-J., Huang, J.-Q., Ran, R., Huang, Z.-H., Wei, F., & Zhang, Q. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.01.007 · Cited by 260
A Toolbox for Lithium–Sulfur Battery Research: Methods and Protocols
Zhang, G., Zhang, Z., Peng, H., Huang, J., & Zhang, Q. (2017) · Small Methods · doi:10.1002/smtd.201700134 · Cited by 260
Recent Advances in Energy Chemical Engineering of Next-Generation Lithium Batteries
Zhang, X.-Q., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2018) · Engineering · doi:10.1016/j.eng.2018.10.008 · Cited by 259
Chen, Y., Zhang, W., Zhou, D., Tian, H., Su, D., Wang, C., Stockdale, D., Kang, F., Li, B., & Wang, G. (2019) · ACS Nano · doi:10.1021/acsnano.9b01079 · Cited by 257
Peng, H., Xu, W., Zhu, L., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602071 · Cited by 256
Yoo, J., Cho, S.-J., Jung, G. Y., Kim, S. H., Choi, K.-H., Kim, J.-H., Lee, C. K., Kwak, S. K., & Lee, S.-Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00870 · Cited by 255
Yu, J., Xiao, J., Li, A., Yang, Z., Zeng, L., Zhang, Q., Zhu, Y., & Guo, L. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202004914 · Cited by 255
Tang, Y., Cen, Z., Ma, Q., Zheng, B., Cai, Z., Liu, S., & Wu, D. (2023) · Advanced Science · doi:10.1002/advs.202206924 · Cited by 27
Metadata
- Authors
- Zhou, G., Paek, E., Hwang, G. S., & Manthiram, A.
- Venue
- Nature Communications
- Published
- 2015-07-17
- Volume
- 6
- Issue
- 1
- Pages
- 7760-7760
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W1158182481
- Cited by
- 1,058
- References
- 58
- FWCI
- 69.12
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.