The DOI matches its Crossref record; 176 of the 176 references it cites were found in a registry or an index.
Review: Photopolymerizable and Degradable Biomaterials for Tissue Engineering Applications
Abstract
Photopolymerizable and degradable biomaterials are finding widespread application in the field of tissue engineering for the engineering of tissues such as bone, cartilage, and liver. The spatial and temporal control afforded by photoinitiated polymerizations has allowed for the development of injectable materials that can deliver cells and growth factors, as well as for the fabrication of scaffolding with complex structures. The materials developed for these applications range from entirely synthetic polymers (e.g., poly(ethylene glycol)) to purely natural polymers (e.g., hyaluronic acid) that are modified with photoreactive groups, with degradation based on the hydrolytic or enzymatic degradation of bonds in the polymer backbone or crosslinks. The degradation behavior also ranges from purely bulk to entirely surface degrading, based on the nature of the backbone chemistry and type of degradable units. The mechanical properties of these polymers are primarily based on factors such as the network crosslinking density and polymer concentration. As we better understand biological features necessary to control cellular behavior, smarter materials are being developed that can incorporate and mimic many of these factors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Odian, G. (2004) · doi:10.1002/047147875x · Cited by 7,158
(2016) · CRC Press eBooks · doi:10.1201/b12801 · Cited by 2,031
Scaffolding in tissue engineering: general approaches and tissue-specific considerations
Chan, B. P., & Leong, K. W. (2008) · European Spine Journal · doi:10.1007/s00586-008-0745-3 · Cited by 1,708
Structural and Rheological Properties of Methacrylamide Modified Gelatin Hydrogels
Van Den Bulcke, A. I., Bogdanov, B., De Rooze, N., Schacht, E. H., Cornelissen, M., & Berghmans, H. (2000) · Biomacromolecules · doi:10.1021/bm990017d · Cited by 1,536
Biomaterials: Where We Have Been and Where We Are Going
Ratner, B. D., & Bryant, S. J. (2004) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.6.040803.140027 · Cited by 1,507
Burdick, J. A., & Anseth, K. S. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00176-x · Cited by 1,008
Self-citationSawhney, A. S., Pathak, C. P., & Hubbell, J. A. (1993) · Macromolecules · doi:10.1021/ma00056a005 · Cited by 974
Degradable poly (β-amino esters): synthesis, characterization, and self-assembly with plasmid DNA
Lynn, D. M., & Langer, R. (2000) · Journal of the American Chemical Society · doi:10.1021/ja0015388 · Cited by 924
Williams, C. G., Malik, A. N., Kim, T. K., Manson, P. N., & Elisseeff, J. H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.024 · Cited by 899
Bryant, S. J., & Anseth, K. S. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1217 · Cited by 845
Cited by
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Hyaluronic Acid Hydrogels for Biomedical Applications
Burdick, J. A., & Prestwich, G. D. (2011) · Advanced Materials · doi:10.1002/adma.201003963 · Cited by 2,139
Self-citationScaffolding in tissue engineering: general approaches and tissue-specific considerations
Chan, B. P., & Leong, K. W. (2008) · European Spine Journal · doi:10.1007/s00586-008-0745-3 · Cited by 1,708
Bioactive modification of poly (ethylene glycol) hydrogels for tissue engineering
Zhu, J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.02.044 · Cited by 1,457
Design properties of hydrogel tissue-engineering scaffolds
Zhu, J., & Marchant, R. E. (2011) · Expert Review of Medical Devices · doi:10.1586/erd.11.27 · Cited by 1,430
25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine
Annabi, N., Tamayol, A., Uquillas, J. A., Akbari, M., Bertassoni, L. E., Cha, C., Camci‐Unal, G., Dokmeci, M. R., Peppas, N. A., & Khademhosseini, A. (2014) · Advanced Materials · doi:10.1002/adma.201303233 · Cited by 1,409
Hydrogels and Hydrogel-Derived Materials for Energy and Water Sustainability
Guo, Y., Bae, J., Fang, Z., Li, P., Zhao, F., & Yu, G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00345 · Cited by 1,395
Alginate-Based Biomaterials for Regenerative Medicine Applications
Sun, J., & Tan, H. (2013) · Materials · doi:10.3390/ma6041285 · Cited by 1,361
Mechanical characterization of 3D-printed polymers
Dizon, J. R. C., Espera, A. H., Chen, Q., & Advincula, R. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.002 · Cited by 1,340
Hydrogel microparticles for biomedical applications
Daly, A. C., Riley, L., Segura, T., & Burdick, J. A. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0148-6 · Cited by 1,249
Self-citationInjectable hydrogels for cartilage and bone tissue engineering
Liu, M., Zeng, X., Ma, C., Yi, H., Ali, Z., Mou, X., Li, S., Deng, Y., & He, N. (2017) · Bone Research · doi:10.1038/boneres.2017.14 · Cited by 1,211
Khetan, S., Guvendiren, M., Legant, W. R., Cohen, D. M., Chen, C. S., & Burdick, J. A. (2013) · Nature Materials · doi:10.1038/nmat3586 · Cited by 1,168
Self-citationDirect 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Self-citationShear-thinning hydrogels for biomedical applications
Guvendiren, M., Lu, H. D., & Burdick, J. A. (2012) · Soft Matter · doi:10.1039/c1sm06513k · Cited by 911
Self-citationIn situ forming injectable hydrogels for drug delivery and wound repair
Dimatteo, R., Darling, N. J., & Segura, T. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.03.007 · Cited by 896
Photocrosslinkable Gelatin Hydrogel for Epidermal Tissue Engineering
Zhao, X., Lang, Q., Yildirimer, L., Lin, Z. Y., Cui, W., Annabi, N., Ng, K. W., Dokmeci, M. R., Ghaemmaghami, A. M., & Khademhosseini, A. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500005 · Cited by 832
Designing degradable hydrogels for orthogonal control of cell microenvironments
Kharkar, P. M., Kiick, K. L., & Kloxin, A. M. (2013) · Chem. Soc. Rev. · doi:10.1039/c3cs60040h · Cited by 717
Abasalizadeh, F., Moghaddam, S. V., Alizadeh, E., akbari, E., Kashani, E., Fazljou, S. M. B., Torbati, M., & Akbarzadeh, A. (2020) · Journal of Biological Engineering · doi:10.1186/s13036-020-0227-7 · Cited by 608
Chemically Modified Biopolymers for the Formation of Biomedical Hydrogels
Muir, V. G., & Burdick, J. A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00923 · Cited by 604
Self-citationHyaluronic acid-based hydrogels: from a natural polysaccharide to complex networks
Xu, X., Jha, A. K., Harrington, D. A., Farach-Carson, M. C., & Jia, X. (2012) · Soft Matter · doi:10.1039/c2sm06463d · Cited by 601
Photocrosslinked alginate hydrogels with tunable biodegradation rates and mechanical properties
Jeon, O., Bouhadir, K. H., Mansour, J. M., & Alsberg, E. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.01.034 · Cited by 592
Directed assembly of cell-laden microgels for fabrication of 3D tissue constructs
Du, Y., Lo, E., Ali, S., & Khademhosseini, A. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0801866105 · Cited by 591
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Yu, C., Schimelman, J., Wang, P., Miller, K. L., Ma, X., You, S., Guan, J., Sun, B., Zhu, W., & Chen, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00810 · Cited by 579
Shear-thinning and self-healing hydrogels as injectable therapeutics and for 3D-printing
Loebel, C., Rodell, C. B., Chen, M. H., & Burdick, J. A. (2017) · Nature Protocols · doi:10.1038/nprot.2017.053 · Cited by 565
Self-citationMoving from static to dynamic complexity in hydrogel design
Burdick, J. A., & Murphy, W. L. (2012) · Nature Communications · doi:10.1038/ncomms2271 · Cited by 561
Self-citationHydrogel design for cartilage tissue engineering: A case study with hyaluronic acid
Kim, I. L., Mauck, R. L., & Burdick, J. A. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.08.073 · Cited by 508
Self-citationMarsac, P. J., Li, T., & Taylor, L. S. (2009) · Pharmaceutical Research · doi:10.1007/s11095-008-9721-1 · Cited by 507
Engineered Microenvironments for Controlled Stem Cell Differentiation
Burdick, J. A., & Vunjak-Novakovic, G. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0131 · Cited by 485
Self-citationMechanical Properties of Cellularly Responsive Hydrogels and Their Experimental Determination
Kloxin, A. M., Kloxin, C. J., Bowman, C. N., & Anseth, K. S. (2010) · Advanced Materials · doi:10.1002/adma.200904179 · Cited by 481
Techniques for fabrication and construction of three-dimensional scaffolds for tissue engineering
Lu, T., Li, Y., & Chen, T. (2013) · International Journal of Nanomedicine · doi:10.2147/ijn.s38635 · Cited by 477
Chan, V., Zorlutuna, P., Jeong, J. H., Kong, H., & Bashir, R. (2010) · Lab on a Chip · doi:10.1039/c004285d · Cited by 468
Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics
Kurian, A. G., Singh, R. K., Patel, K. D., Lee, J.-H., & Kim, H.-W. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.06.027 · Cited by 444
25th Anniversary Article: Designer Hydrogels for Cell Cultures: A Materials Selection Guide
Thiele, J., Ma, Y., Bruekers, S. M. C., Ma, S., & Huck, W. T. S. (2014) · Advanced Materials · doi:10.1002/adma.201302958 · Cited by 432
Modified Gellan Gum hydrogels with tunable physical and mechanical properties
Coutinho, D. F., Sant, S. V., Shin, H., Oliveira, J. T., Gomes, M. E., Neves, N. M., Khademhosseini, A., & Reis, R. L. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.06.035 · Cited by 430
Spatiotemporal hydrogel biomaterials for regenerative medicine
Brown, T. E., & Anseth, K. S. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00445a · Cited by 428
Fundamentals and Applications of Photo-Cross-Linking in Bioprinting
Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00812 · Cited by 416
Self-citationPhotopolymer Materials and Processes for Advanced Technologies
Crivello, J. V., & Reichmanis, E. (2014) · Chemistry of Materials · doi:10.1021/cm402262g · Cited by 406
Shin, H., Olsen, B. D., & Khademhosseini, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.12.050 · Cited by 400
An overview of injectable polymeric hydrogels for tissue engineering
Sivashanmugam, A., Arun Kumar, R., Vishnu Priya, M., Nair, S. V., & Jayakumar, R. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.05.014 · Cited by 366
Photopolymerization of cell-encapsulating hydrogels: Crosslinking efficiency versus cytotoxicity
Mironi-Harpaz, I., Wang, D. Y., Venkatraman, S., & Seliktar, D. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.12.034 · Cited by 364
Polymeric Biomaterials in Tissue Engineering
Kohane, D. S., & Langer, R. (2008) · Pediatric Research · doi:10.1203/01.pdr.0000305937.26105.e7 · Cited by 347
Liu, B., Wang, Y., Miao, Y., Zhang, X., Fan, Z., Singh, G., Zhang, X., Xu, K., Li, B., Hu, Z., et al. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.04.023 · Cited by 338
An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing
Kirchmajer, D. M., Gorkin III, R., & in het Panhuis, M. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00393h · Cited by 337
Poly(trimethylene carbonate)-based polymers engineered for biodegradable functional biomaterials
Fukushima, K. (2016) · Biomaterials Science · doi:10.1039/c5bm00123d · Cited by 335
Jin, R., Moreira Teixeira, L. S., Krouwels, A., Dijkstra, P. J., van Blitterswijk, C. A., Karperien, M., & Feijen, J. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.024 · Cited by 319
Collagen- and hyaluronic acid-based hydrogels and their biomedical applications
Xu, Q., Torres, J. E., Hakim, M., Babiak, P. M., Pal, P., Battistoni, C. M., Nguyen, M., Panitch, A., Solorio, L., & Liu, J. C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100641 · Cited by 318
Xiao, W., He, J., Nichol, J. W., Wang, L., Hutson, C. B., Wang, B., Du, Y., Fan, H., & Khademhosseini, A. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.01.016 · Cited by 315
Li, G. L., Möhwald, H., & Shchukin, D. G. (2013) · Chemical Society Reviews · doi:10.1039/c3cs35517a · Cited by 314
Barrila, J., Radtke, A. L., Crabbé, A., Sarker, S. F., Herbst-Kralovetz, M. M., Ott, C. M., & Nickerson, C. A. (2010) · Nature Reviews Microbiology · doi:10.1038/nrmicro2423 · Cited by 302
Hybrid Multicomponent Hydrogels for Tissue Engineering
Jia, X., & Kiick, K. L. (2009) · Macromolecular Bioscience · doi:10.1002/mabi.200800284 · Cited by 308
Tailoring Gelation Mechanisms for Advanced Hydrogel Applications
Nele, V., Wojciechowski, J. P., Armstrong, J. P. K., & Stevens, M. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202002759 · Cited by 300
Spatially controlled hydrogel mechanics to modulate stem cell interactions
Marklein, R. A., & Burdick, J. A. (2010) · Soft Matter · doi:10.1039/b916933d · Cited by 280
Self-citation3D Laser Micro‐ and Nanoprinting: Challenges for Chemistry
Barner‐Kowollik, C., Bastmeyer, M., Blasco, E., Delaittre, G., Müller, P., Richter, B., & Wegener, M. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201704695 · Cited by 280
Structured Macroporous Hydrogels: Progress, Challenges, and Opportunities
De France, K. J., Xu, F., & Hoare, T. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700927 · Cited by 279
Polysaccharides and Their Derivatives for Versatile Tissue Engineering Application
Khan, F., & Ahmad, S. R. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200409 · Cited by 274
Zhang, Y., Avery, R. K., Vallmajo‐Martin, Q., Assmann, A., Vegh, A., Memic, A., Olsen, B. D., Annabi, N., & Khademhosseini, A. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501489 · Cited by 270
Meinel, A. J., Germershaus, O., Luhmann, T., Merkle, H. P., & Meinel, L. (2012) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2012.01.016 · Cited by 270
Strategies for Articular Cartilage Lesion Repair and Functional Restoration
Ahmed, T. A. E., & Hincke, M. T. (2010) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2009.0590 · Cited by 270
Bio‐Origami Hydrogel Scaffolds Composed of Photocrosslinked PEG Bilayers
Jamal, M., Kadam, S. S., Xiao, R., Jivan, F., Onn, T., Fernandes, R., Nguyen, T. D., & Gracias, D. H. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201200458 · Cited by 270
Multifaceted Design and Emerging Applications of Tissue Adhesives
Ma, Z., Bao, G., & Li, J. (2021) · Advanced Materials · doi:10.1002/adma.202007663 · Cited by 269
Recent Advances in light-responsive on-demand drug-delivery Systems
Linsley, C. S., & Wu, B. M. (2017) · Therapeutic Delivery · doi:10.4155/tde-2016-0060 · Cited by 265
The immune reaction and degradation fate of scaffold in cartilage/bone tissue engineering
Yang, D., Xiao, J., Wang, B., Li, L., Kong, X., & Liao, J. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.109927 · Cited by 192
Chen, Y.-Y., Wu, H.-C., Sun, J.-S., Dong, G.-C., & Wang, T.-W. (2013) · Langmuir · doi:10.1021/la400268p · Cited by 126
Hacker, M. C., Klouda, L., Ma, B. B., Kretlow, J. D., & Mikos, A. G. (2008) · Biomacromolecules · doi:10.1021/bm8000414 · Cited by 104
Berg, A., Wyrwa, R., Weisser, J., Weiss, T., Schade, R., Hildebrand, G., Liefeith, K., Schneider, B., Ellinger, R., & Schnabelrauch, M. (2011) · Advanced Engineering Materials · doi:10.1002/adem.201080092 · Cited by 33
Buwalda, S. J., Dijkstra, P. J., & Feijen, J. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201100640 · Cited by 17
Metadata
- Authors
- Ifkovits, J. L., & Burdick, J. A.
- Venue
- Tissue Engineering
- Publisher
- SAGE Publications
- Published
- 2007-10
- Volume
- 13
- Issue
- 10
- Pages
- 2369-2385
- ISSN
- 1076-3279 (ISSN-L)
- 1557-8690
- OpenAlex
- W1970168057
- Cited by
- 619
- References
- 176
- FWCI
- 14.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.