The DOI matches its Crossref record.
Lithium Sulfur Battery: Oxidation/Reduction Mechanisms of Polysulfides in THF Solutions
Open accessAbstract
The redox processes of at a glassy carbon electrode in THF was studied by programmed cyclic voltammetry in the range of +1300 to −2000 mV ( vs. polysulfide reference electrode) at sweep rates of 2–200 mV/s. One anodic and up to three cathodic peaks were detected. The anodic peak seems to result from the oxidation of all PS's through the same intermediate to elemental sulfur. The first cathodic peak is caused by the reduction of all PS to in a diffusion controlled reaction. The second reduction peak most likely arises from the reduction of to . This is apparently preceded by a chemical step. The third reduction peak is caused by the reduction of to or S 2− or a mixture of both in a diffusion‐controlled reaction. The high Tafel slope of the third peak apparently results from passivation of the electrode by the precipitation of and .
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
“owing to the insulating nature of sulphur and the solid reduction products (Li 2 S and Li 2 S 2 ); (ii) fast capacity fading owing to the generation of various soluble polysulphide Li 2 S n (3 ≤ n ≤ 6) intermediate”
BackgroundA highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Lithium-ion batteries: outlook on present, future, and hybridized technologies
Kim, T., Song, W., Son, D.-Y., Ono, L. K., & Qi, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10513h · Cited by 2,479
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Tao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391
Sulfur-Impregnated Disordered Carbon Nanotubes Cathode for Lithium–Sulfur Batteries
Guo, J., Xu, Y., & Wang, C. (2011) · Nano Letters · doi:10.1021/nl202297p · Cited by 1,278
Progress and prospective of solid-state lithium batteries
Takada, K. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.034 · Cited by 1,056
Metallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
Barchasz, C., Molton, F., Duboc, C., Leprêtre, J.-C., Patoux, S., & Alloin, F. (2012) · Analytical Chemistry · doi:10.1021/ac2032244 · Cited by 946
Elazari, R., Salitra, G., Garsuch, A., Panchenko, A., & Aurbach, D. (2011) · Advanced Materials · doi:10.1002/adma.201103274 · Cited by 895
Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer Coating
Yang, Y., Yu, G., Cha, J. J., Wu, H., Vosgueritchian, M., Yao, Y., Bao, Z., & Cui, Y. (2011) · ACS Nano · doi:10.1021/nn203436j · Cited by 866
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02166 · Cited by 816
Li, G., Sun, J., Hou, W., Jiang, S., Huang, Y., & Geng, J. (2016) · Nature Communications · doi:10.1038/ncomms10601 · Cited by 806
Yolk–Shell Structure of Polyaniline-Coated Sulfur for Lithium–Sulfur Batteries
Zhou, W., Yu, Y., Chen, H., DiSalvo, F. J., & Abruña, H. D. (2013) · Journal of the American Chemical Society · doi:10.1021/ja409508q · Cited by 782
A review on electric vehicle battery modelling: From Lithium-ion toward Lithium–Sulphur
Fotouhi, A., Auger, D. J., Propp, K., Longo, S., & Wild, M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.009 · Cited by 780
2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li–S batteries
Cha, E., Patel, M. D., Park, J., Hwang, J., Prasad, V., Cho, K., & Choi, W. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0061-y · Cited by 767
New Nanostructured Li2S/Silicon Rechargeable Battery with High Specific Energy
Yang, Y., McDowell, M. T., Jackson, A., Cha, J. J., Hong, S. S., & Cui, Y. (2010) · Nano Letters · doi:10.1021/nl100504q · Cited by 653
Cathode Composites for Li–S Batteries via the Use of Oxygenated Porous Architectures
Demir-Cakan, R., Morcrette, M., Nouar, F., Davoisne, C., Devic, T., Gonbeau, D., Dominko, R., Serre, C., Férey, G., & Tarascon, J.-M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2062659 · Cited by 630
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Recent Advances in Electrolytes for Lithium–Sulfur Batteries
Zhang, S., Ueno, K., Dokko, K., & Watanabe, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500117 · Cited by 616
Seh, Z. W., Yu, J. H., Li, W., Hsu, P.-C., Wang, H., Sun, Y., Yao, H., Zhang, Q., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6017 · Cited by 600
Carbon materials for Li–S batteries: Functional evolution and performance improvement
Liang, J., Sun, Z.-H., Li, F., & Cheng, H.-M. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.007 · Cited by 593
Rechargeable Lithium Sulfur Battery
Cheon, S.-E., Ko, K.-S., Cho, J.-H., Kim, S.-W., Chin, E.-Y., & Kim, H.-T. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1571532 · Cited by 553
Sulfur Speciation in Li–S Batteries Determined by Operando X-ray Absorption Spectroscopy
Cuisinier, M., Cabelguen, P.-E., Evers, S., He, G., Kolbeck, M., Garsuch, A., Bolin, T., Balasubramanian, M., & Nazar, L. F. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz401763d · Cited by 550
Wu, F., Chen, J., Chen, R., Wu, S., Li, L., Chen, S., & Zhao, T. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1114724 · Cited by 520
Chung, S., & Manthiram, A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400845 · Cited by 516
Recent progress and remaining challenges in sulfur-based lithium secondary batteries – a review
Bresser, D., Passerini, S., & Scrosati, B. (2013) · Chemical Communications · doi:10.1039/c3cc46131a · Cited by 514
Solvate Ionic Liquid Electrolyte for Li–S Batteries
Dokko, K., Tachikawa, N., Yamauchi, K., Tsuchiya, M., Yamazaki, A., Takashima, E., Park, J.-W., Ueno, K., Seki, S., Serizawa, N., et al. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.111308jes · Cited by 507
Progress in Mechanistic Understanding and Characterization Techniques of Li‐S Batteries
Xu, R., Lu, J., & Amine, K. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500408 · Cited by 507
Yin, L., Wang, J., Lin, F., Yang, J., & Nuli, Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03495f · Cited by 484
The Lithium/Sulfur Rechargeable Cell
Shim, J., Striebel, K. A., & Cairns, E. J. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1503076 · Cited by 478
Progress on the Critical Parameters for Lithium–Sulfur Batteries to be Practically Viable
Chung, S., Chang, C., & Manthiram, A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801188 · Cited by 477
Electrochemical performance of lithium/sulfur cells with three different polymer electrolytes
Marmorstein, D., Yu, T. H., Striebel, K. A., McLarnon, F. R., Hou, J., & Cairns, E. J. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00432-8 · Cited by 451
A strategic approach to recharging lithium-sulphur batteries for long cycle life
Su, Y.-S., Fu, Y., Cochell, T., & Manthiram, A. (2013) · Nature Communications · doi:10.1038/ncomms3985 · Cited by 449
Stable cycling of lithium sulfide cathodes through strong affinity with a bifunctional binder
Seh, Z. W., Zhang, Q., Li, W., Zheng, G., Yao, H., & Cui, Y. (2013) · Chemical Science · doi:10.1039/c3sc51476e · Cited by 442
Challenges and Key Parameters of Lithium-Sulfur Batteries on Pouch Cell Level
Dörfler, S., Althues, H., Härtel, P., Abendroth, T., Schumm, B., & Kaskel, S. (2020) · Joule · doi:10.1016/j.joule.2020.02.006 · Cited by 438
Recent advances in shuttle effect inhibition for lithium sulfur batteries
Ren, W., Ma, W., Zhang, S., & Tang, B. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.022 · Cited by 434
A High‐Performance Polymer Tin Sulfur Lithium Ion Battery
Hassoun, J., & Scrosati, B. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907324 · Cited by 433
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
Rechargeable Lithium Sulfur Battery
Cheon, S.-E., Ko, K.-S., Cho, J.-H., Kim, S.-W., Chin, E.-Y., & Kim, H.-T. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1571533 · Cited by 424
Ng, S., Lau, M. Y. L., & Ong, W. (2021) · Advanced Materials · doi:10.1002/adma.202008654 · Cited by 404
Lithium–sulfur batteries: from liquid to solid cells
Lin, Z., & Liang, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04727c · Cited by 399
Unique behaviour of nonsolvents for polysulphides in lithium–sulphur batteries
Cuisinier, M., Cabelguen, P.-E., Adams, B. D., Garsuch, A., Balasubramanian, M., & Nazar, L. F. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00372a · Cited by 393
Cui, Y., Abouimrane, A., Lu, J., Bolin, T., Ren, Y., Weng, W., Sun, C., Maroni, V. A., Heald, S. M., & Amine, K. (2013) · Journal of the American Chemical Society · doi:10.1021/ja402597g · Cited by 387
Emergent Pseudocapacitance of 2D Nanomaterials
Yu, X., Yun, S., Yeon, J. S., Bhattacharya, P., Wang, L., Lee, S. W., Hu, X., & Park, H. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702930 · Cited by 387
Transition Metal Dichalcogenide Atomic Layers for Lithium Polysulfides Electrocatalysis
Babu, G., Masurkar, N., Al Salem, H., & Arava, L. M. R. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08681 · Cited by 386
Zhou, W., Xiao, X., Cai, M., & Yang, L. (2014) · Nano Letters · doi:10.1021/nl502238b · Cited by 382
New insight into the discharge process of sulfur cathode by electrochemical impedance spectroscopy
Yuan, L., Qiu, X., Chen, L., & Zhu, W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.033 · Cited by 380
Dong, H., Tutusaus, O., Liang, Y., Zhang, Y., Lebens-Higgins, Z., Yang, W., Mohtadi, R., & Yao, Y. (2020) · Nature Energy · doi:10.1038/s41560-020-00734-0 · Cited by 376
Carbonized Eggshell Membrane as a Natural Polysulfide Reservoir for Highly Reversible Li‐S Batteries
Chung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201304365 · Cited by 375
A Mathematical Model for a Lithium–Sulfur Cell
Kumaresan, K., Mikhaylik, Y., & White, R. E. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2937304 · Cited by 375
Wang, J., Chew, S. Y., Zhao, Z. W., Ashraf, S., Wexler, D., Chen, J., Ng, S. H., Chou, S. L., & Liu, H. K. (2008) · Carbon · doi:10.1016/j.carbon.2007.11.007 · Cited by 371
Performance Improvement of Magnesium Sulfur Batteries with Modified Non‐Nucleophilic Electrolytes
Zhao‐Karger, Z., Zhao, X., Wang, D., Diemant, T., Behm, R. J., & Fichtner, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401155 · Cited by 370
Yuan, L., Yuan, H., Qiu, X., Chen, L., & Zhu, W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.149 · Cited by 369
Encapsulated Monoclinic Sulfur for Stable Cycling of Li–S Rechargeable Batteries
Moon, S., Jung, Y. H., Jung, W. K., Jung, D. S., Choi, J. W., & Kim, D. K. (2013) · Advanced Materials · doi:10.1002/adma.201303166 · Cited by 354
Chen, S.-R., Zhai, Y.-P., Xu, G.-L., Jiang, Y.-X., Zhao, D.-Y., Li, J.-T., Huang, L., & Sun, S.-G. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.03.005 · Cited by 346
In Situ Raman Spectroscopy of Sulfur Speciation in Lithium–Sulfur Batteries
Wu, H.-L., Huff, L. A., & Gewirth, A. A. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5072942 · Cited by 338
Improved dischargeability and reversibility of sulfur cathode in a novel ionic liquid electrolyte
Yuan, L. X., Feng, J. K., Ai, X. P., Cao, Y. L., Chen, S. L., & Yang, H. X. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.02.007 · Cited by 336
Sulfur Cathodes with Hydrogen Reduced Titanium Dioxide Inverse Opal Structure
Liang, Z., Zheng, G., Li, W., Seh, Z. W., Yao, H., Yan, K., Kong, D., & Cui, Y. (2014) · ACS Nano · doi:10.1021/nn501308m · Cited by 313
All-solid-state Li/S batteries with highly conductive glass–ceramic electrolytes
Hayashi, A., Ohtomo, T., Mizuno, F., Tadanaga, K., & Tatsumisago, M. (2003) · Electrochemistry Communications · doi:10.1016/s1388-2481(03)00167-x · Cited by 312
Facile synthesis of Li2S–polypyrrole composite structures for high-performance Li2S cathodes
Seh, Z. W., Wang, H., Hsu, P.-C., Zhang, Q., Li, W., Zheng, G., Yao, H., & Cui, Y. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43395a · Cited by 311
Yolk/shell nanoparticles: classifications, synthesis, properties, and applications
Purbia, R., & Paria, S. (2015) · Nanoscale · doi:10.1039/c5nr04729c · Cited by 307
Zhang, S. S. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.002207jes · Cited by 297
Zhou, W., Wang, C., Zhang, Q., Abruña, H. D., He, Y., Wang, J., Mao, S. X., & Xiao, X. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401752 · Cited by 292
A new direction for the performance improvement of rechargeable lithium/sulfur batteries
Zhang, S. S., & Read, J. A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.076 · Cited by 289
Shrivastav, V., Sundriyal, S., Goel, P., Kaur, H., Tuteja, S. K., Vikrant, K., Kim, K.-H., Tiwari, U. K., & Deep, A. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.05.006 · Cited by 284
Sulphur-polypyrrole composite positive electrode materials for rechargeable lithium batteries
Wang, J., Chen, J., Konstantinov, K., Zhao, L., Ng, S. H., Wang, G. X., Guo, Z. P., & Liu, H. K. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.12.046 · Cited by 284
McCloskey, B. D. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01814 · Cited by 281
Recent progress in two-dimensional COFs for energy-related applications
Zhan, X., Chen, Z., & Zhang, Q. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02105d · Cited by 275
Wu, Y., Hu, Q., Liang, H., Wang, A., Xu, H., Wang, L., & He, X. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202300259 · Cited by 270
Cyclic Voltammetry in Lithium–Sulfur Batteries—Challenges and Opportunities
Huang, X., Wang, Z., Knibbe, R., Luo, B., Ahad, S. A., Sun, D., & Wang, L. (2019) · Energy Technology · doi:10.1002/ente.201801001 · Cited by 269
Synthesis and Electrochemical Performance of Sulfur/Highly Porous Carbon Composites
Lai, C., Gao, X. P., Zhang, B., Yan, T. Y., & Zhou, Z. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp809473e · Cited by 265
Batteries for Electric and Hybrid-Electric Vehicles
Cairns, E. J., & Albertus, P. (2010) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-073009-100942 · Cited by 263
Metadata
- Authors
- Yamin, H., Gorenshtein, A., Penciner, J., Sternberg, Y., & Peled, E.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1988-05-01
- Volume
- 135
- Issue
- 5
- Pages
- 1045-1048
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W1620090426
- Cited by
- 471
- References
- 0
- FWCI
- 0.48
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.