Biodegradable synthetic polymers for tissue engineering
Open accessThe DOI matches its Crossref record; 96 of the 97 references it cites were found in a registry or an index; 1 of the 146 sources its claims cite were checked for support.
Abstract
This review focuses on biodegradable synthetic polymers, discussing synthesis, properties and biodegradability, especially within the polyester family including polylactides.
Overview
CoChat Summary
TL;DR
This review surveys biodegradable synthetic polymers for tissue engineering, emphasizing polyesters (PGA, PLA, PLGA), polylactones, poly(propylene fumarate), polyanhydrides, tyrosine-derived polycarbonates, polyorthoesters, polyurethanes, and polyphosphazenes. It concludes that polyesters dominate clinically, while injectable in situ curable systems such as PPF and photocrosslinkable polyanhydrides are promising but face challenges in biocompatibility, degradation control, and heat generation.
Key findings
- Polyesters are the most studied biodegradable polymers. PGA has 46–50% crystallinity, Tg 36°C, Tm 225°C; in Dexon sutures in vitro, first-stage degradation predominates for 21 days, crystalline degradation takes a further 28 days, and after 49 days weight loss was about 42% with complete loss of mechanical properties.
- PLA/PGA copolymer behavior depends on composition: 25–75% (l)LA/GA and 0–70% (dl)LA/GA are amorphous; 70/30 GA/LA has the highest water uptake, while 50/50 is reported as most unstable to hydrolysis; Vicryl is 8% (l)LA and 92% GA.
- Poly(caprolactone) degrades slowly: homopolymer degradation is on the order of 2–3 years, and PCL with initial average molecular weight 50,000 takes about 3 years for complete in vitro degradation.
- Poly(propylene fumarate) degrades to fumaric acid and propylene glycol; time to 20% original weight loss ranged from 84 days (PPF/β-TCP composite) to over 200 days (PPF/CaSO4 composite). PPF formulations showed maximum curing temperatures of 38–48°C versus 94°C for PMMA cements, curing times of 1–121 min, and compressive strengths of 1–12 MPa.
- Polyanhydrides degrade by surface erosion; poly(sebacic acid) degrades in about 54 days in saline, while poly(1,6-bis(p-carboxyphenoxy)hexane) is estimated at 1 year. Poly[1,6-bis(carboxyphenoxy)hexane] has a Young’s modulus of 1.3 MPa versus human bone at 40–60 MPa; poly(anhydride-co-imides) reached compressive strengths of 50–60 MPa, and photocrosslinked systems showed compressive strengths of 30–40 MPa and tensile strengths of 15–27 MPa.
- Degradable polyurethanes based on lysine diisocyanate showed varied properties: dl-lactide networks were rigid (Tg = 60°C) with ultimate tensile strengths of ~40–70 MPa, caprolactone triol networks were low-modulus elastomers with tensile strengths of 1–4 MPa, and copolymer networks had elongation up to 600% with compressive strengths of 3–25 MPa. In vivo, porous polyurethane artificial skin degraded almost completely 4–8 weeks after implantation in guinea pigs with no adverse tissue reaction.
Methods
- Design: narrative literature review; no primary experimental study or systematic review protocol is reported.
- Data/sample: published literature on biodegradable synthetic polymers, including synthesis, properties, degradation, biocompatibility, and injectable polymer systems; Tables 1–3 summarize polymer properties and precursors.
- Analysis: qualitative synthesis of major polymer classes, their degradation modes/products, mechanical properties, biocompatibility, and potential for injectable tissue-engineering compositions.
Limitations
- Stated: the paper notes that Table 2 data “should be used as a guide only” and that sufficient data are not available to provide a comprehensive list of properties for polyanhydrides, polycarbonates, polyurethanes, and polyphosphazenes.
- Stated: for polyanhydrides, no data are reported about polymer sterilizability and heat generation during polymerization; for degradable polyurethanes, the effect of degradation products and how they are removed from the body are not clearly understood.
- Evident: as a narrative review, it lacks systematic search criteria, study quality appraisal, and meta-analysis, so conclusions depend on the cited literature and may not comprehensively cover all biodegradable polymers or tissue-engineering applications.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
1 Valid · 20 Not valid · 105 Not checked · 89 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“A meniscal replica implanted contained only fibro-cartilage after 18 weeks and decreased the degradation of the articular cartilage.”
What the sources say
- Supportedcites De Groot et al.., 1996 source
The Aliphatic PU network passage (page not provided) reports that articular-cartilage degeneration was less severe with the prosthesis than in meniscectomized control knees. It also says the prostheses contained only fibrocartilage after 18 weeks. Degeneration was reduced, not eliminated. (LLM, conf=0.91)
plainstates a causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
In the paper
“The compressive strengths varied between 1 and 12 MPa”
What the sources say
- Not matchedcites Peter et al., 1998a
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
In the paper
“Cross-linking characteristics reported for PPF, N-vinyl pyrrolidone (N-VP), benzoyl peroxide, sodium chloride, and TCP indicate that for a range of formulations, the maximum temperature varied within 38 to about 48ºC, compared to 94ºC observed for polymethylmethacrylate (PMMA) cements.”
What the sources say
- Not matchedcites Peter et al., 1998a
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
None of the sources cited for this claim could be matched to a paper in Crossref, so there is nothing to check it against.
In the paper
“Based on in-vitro studies, the time required to reach 20% loss in original weight ranged from 84 (PPF/ß-TCP composite) to over 200 days (PPF/CaSO 4 composite)”
What the sources say
- Not matchedcites Peter et al., 1997b
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
- Not matchedcites Kharas et al., 1997
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“These composite materials exhibit compressive strengths in the range 2 to 30 MPa.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
94 more claims
Create a free account to see all 215 claims and to verify the 2 references still open.
- It may state two separate claims as one. 62
- Probably not a substantial claim. 76
- The quote only partly states this claim. 1
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Advantages include a tightly controlled manufacturing process, accurate reproducibility, adjustable biodegradability, and a wide variety of both chemical and physical properties.[ 171 ]”
From Unraveling and Harnessing the Immune Response at the Cell–Biomaterial Interface for Tissue Engineering Purposes (2024) · cites this paper as [171]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
§ Polyanhydrides
“Polyanhydrides degrades by surface erosion (Kohn and Langer, 1997) and their main applications are in controlled drug delivery.”
§ Conclusions
“Polyanhydride degrade by bulk erosion and their main applications are in controlled drug delivery.”
Citations
Cites
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741 · cited 4×
“…developments in siloxane-based polyurethanes, which have greater in-vivo stability than conventional polyetherurethanes (e.g., poly(tetramethylene oxide) (PTMO)-based) have provided opportunities for development of a range of medical implants for chronic applications (Gunatillake et al., 2001).”
BackgroundInfluentialBiomaterial developments for bone tissue engineering
Burg, K. J. L., Porter, S., & Kellam, J. F. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00102-2 · Cited by 1,643 · cited 1×
“Polyesters have also been considered for development of tissue engineering applications (Hubbell, 1995; Thomson et al 1995a, Yazemski et al. 1996; Wong and Mooney, 1997), particularly for bone tissue engineering (Kohn and Langer, 1997; Burg et al., 2000).”
BackgroundChandra, R. (1998) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00039-7 · Cited by 1,462
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Biomaterials in Tissue Engineering
Hubbell, J. A. (1995) · Nature Biotechnology · doi:10.1038/nbt0695-565 · Cited by 1,060 · cited 1×
“Polyesters have also been considered for development of tissue engineering applications (Hubbell, 1995; Thomson et al 1995a, Yazemski et al. 1996; Wong and Mooney, 1997), particularly for bone tissue engineering (Kohn and Langer, 1997; Burg et al., 2000).”
BackgroundPolylactic Acid for Surgical Implants
KULKARNI, R. K. (1966) · Archives of Surgery · doi:10.1001/archsurg.1966.01330050143023 · Cited by 841
Evolution of bone transplantation: molecular, cellular and tissue strategies to engineer human bone
Yaszemski, M. J., Payne, R. G., Hayes, W. C., Langer, R., & Mikos, A. G. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85762-0 · Cited by 729
Miller, R. A., Brady, J. M., & Cutright, D. E. (1977) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820110507 · Cited by 722 · cited 2×
“For the (l)LA/GA copolymers, resistance to hydrolysis is more pronounced at either end of the copolymers compositions range (Miller et al., 1977; Gilding and Reed, 1979; Reed and Gilding, 1981; Vert et al., 1984).”
BackgroundInjectable biodegradable materials for orthopedic tissue engineering
Temenoff, J. S., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00108-3 · Cited by 554 · cited 8×
“A number of methods have been reported to prepare PPF, and each results in different polymer properties (Peter et al., 1997a,b, 1999; Temenoff and Mikos 2000).”
BackgroundMethodInfluentialLeong, K. W., Brott, B. C., & Langer, R. (1985) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820190806 · Cited by 541 · cited 12×
“The polyurethanes ranged from elastomers with elongations at break as high as 780 %, but with low tensile strengths (5.8 to 8.1 MPa).”
BackgroundInfluential
Research works printed but not linked: 5
- Scranton A, Bowman C, Peiffer R, eds. ACS Symposium Series 673; American Chemical Society, Washington DC. pp 189-202.
- Ratner BD, Hoffman AS, Schoen FJ, Lemon JE, eds. Aca- demic Press, San Diego. pp 65-73.
- Lamba NMK, Woodhouse KA, Cooper SL (1998) Poly- urethanes in Biomedical Applications. CRC Press: New York p 205-241.
- Mark JE, Alcock HR, West R (1992) Inorganic Poly- mers. Prentice Hall, Upper Saddle River, NJ. Chapter
- Ng SY, Vandamme T, Tayler MS, Heller J (1997) Syn- thesis and erosion studies of self-catalysed poly(orthoester)s. Macromolecules 30: 770-772.
Cited by
Items 601–700 of 1,762
Bioresorbable Scaffolds for Cardiovascular Tissue Engineering
Generali, M., Dijkman, P. E., & Hoerstrup, S. P. (2014) · EMJ Interventional Cardiology · doi:10.33590/emjintcardiol/10312068 · Cited by 39
Sustained-Release Ophthalmic Drug Delivery Systems for Treatment of Macular Disorders
Booth, B. A., Denham, L. V., Bouhanik, S., Jacob, J. T., & Hill, J. M. (2007) · Drugs & Aging · doi:10.2165/00002512-200724070-00006 · Cited by 33
Tissue Engineering Skeletal Muscle
Kosnik, P. E., Dennis, R. G., & Vandenburgh, H. H. (2003) · Springer eBooks · doi:10.1007/0-387-21547-6_28 · Cited by 40
Li, M., Guo, Q., Zhong, C., & Zhang, Z. (2023) · Drug Delivery · doi:10.1080/10717544.2023.2288797 · Cited by 37
“…various biocompatible and biodegradable polymers can be safe and non-hazardous methods of delivering substances in vivo (Acharya and Sahoo, 2011; Gunatillake et al., 2003). the issue regarding what parameters and principles of design are necessary for choosing the best material arises, given…”
BackgroundDrábik, M., Kousal, J., Celma, C., et al. (2014) · Plasma Processes and Polymers · doi:10.1002/ppap.201400005 · Cited by 32
Polymer Capsules for Plaque‐Targeted In Vivo Delivery
Richardson, J. J., Choy, M. Y., Guo, J., Liang, K., Alt, K., Yuan, P., Cui, J., Law, L. S., Hagemeyer, C. E., & Caruso, F. (2016) · Advanced Materials · doi:10.1002/adma.201601754 · Cited by 32
Mandal, M., Ramkumar, V., & Chakraborty, D. (2019) · Polymer Chemistry · doi:10.1039/c8py01750f · Cited by 34
Park, H., Choi, J. W., & Jeong, W. S. (2022) · Journal of Craniofacial Surgery · doi:10.1097/scs.0000000000008595 · Cited by 32
Kodavaty, J. (2022) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2022.103298 · Cited by 33
Identification and ranking biomaterials for bone scaffolds using machine learning and PROMETHEE
Javaid, S., Gorji, H. T., Soulami, K. B., & Kaabouch, N. (2023) · Research on Biomedical Engineering · doi:10.1007/s42600-022-00257-5 · Cited by 35
“Natural or synthetic polymers and inorganic materials are currently used for bone-tissue engineering (Gunatillake & Adhikari 2003).”
BackgroundBIOMIMETIC ELECTROSPUN GELATIN–CHITOSAN POLYURETHANE FOR HEART VALVE LEAFLETS
Wong, C. S., Shital, P., Chen, R., Owida, A. A., & Morsi, Y. (2010) · Journal of Mechanics in Medicine and Biology · doi:10.1142/s0219519410003551 · Cited by 32
Salerno, A., & Domingo, C. (2015) · Journal of Porous Materials · doi:10.1007/s10934-015-9911-2 · Cited by 32
Shikha, K., Katiyar, S., Darshna, Anand, A., Singh, D., Singh, B. N., Mallick, S. P., Mishra, A., & Srivastava, P. (2022) · Frontiers in Chemistry · doi:10.3389/fchem.2022.1051678 · Cited by 35
“Bone ECM in-vivo has a rigidity of around 100 GPa.”
BackgroundMa, X., Wu, T., & Robich, M. P. (2012) · Interventional Cardiology · doi:10.2217/ica.11.88 · Cited by 31
Ultrathin Polymer Membranes with Patterned, Micrometric Pores for Organs-on-Chips
Pensabene, V., Costa, L. A., Terekhov, A. Y., Gnecco, J. S., Wikswo, J. P., & Hofmeister, W. H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05754 · Cited by 30
Multiscale Models of Degradation and Healing of Bone Tissue Engineering Nanocomposite Scaffolds
Sharma, A., Molla, M. S., Katti, K. S., & Katti, D. R. (2017) · Journal of Nanomechanics and Micromechanics · doi:10.1061/(asce)nm.2153-5477.0000133 · Cited by 30
Natural and Synthetic Scaffolds
Wolfe, P. S., Sell, S. A., & Bowlin, G. L. (2010) · Springer eBooks · doi:10.1007/978-3-642-02824-3_3 · Cited by 39
“The limitations of diffusion-based nutrient transport restrict the maximum thickness of avascular tissue-engineered constructs to less than 2 mm [34].”
BackgroundKermanian, M., Sadighian, S., Ramazani, A., Naghibi, M., Khoshkam, M., & Ghezelbash, P. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01792 · Cited by 30
In vitro comparative biodegradation analysis of salt‐leached porous polymer scaffolds
LeBlon, C. E., Pai, R., Fodor, C. R., Golding, A. S., Coulter, J. P., & Jedlicka, S. S. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38321 · Cited by 38
Ardila, D. C., Tamimi, E. A., Danford, F. L., Haskett, D. G., Kellar, R. S., Doetschman, T. C., & Geest, J. P. V. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.10.021 · Cited by 35
Chauhan, D. S., Reddy, B. P. K., Mishra, S. K., Prasad, R., Dhanka, M., Vats, M., Ravichandran, G., Poojari, D., Mhatre, O., De, A., et al. (2019) · Langmuir · doi:10.1021/acs.langmuir.8b03460 · Cited by 32
Xia, H., Kan, S., Li, Z., Chen, J., Cui, S., Wu, W., Ouyang, P., & Guo, K. (2014) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27241 · Cited by 34
Regenerative endodontics—Creating new horizons
Dhillon, H., Kaushik, M., & Sharma, R. (2015) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33587 · Cited by 43
Resorbable implants in pediatric fracture treatment
Grün, N. G., Holweg, P. L., Donohue, N., Klestil, T., & Weinberg, A. (2018) · Innovative Surgical Sciences · doi:10.1515/iss-2018-0006 · Cited by 30
Gil-Castell, O., Badia-Valiente, J. D., Bou, J. J., & Ribes-Greus, A. (2019) · Nanomaterials · doi:10.3390/nano9050786 · Cited by 32
Controlled degradation of poly-ε-caprolactone for resorbable scaffolds
Hegyesi, N., Hodosi, E., Polyák, P., Faludi, G., Balogh‐Weiser, D., & Pukánszky, B. (2019) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2019.110678 · Cited by 34
Additive processing of biopolymers for medical applications
Velu, R., Jayashankar, D. K., & Subburaj, K. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-818411-0.00019-7 · Cited by 36
Biodegradable functional macromolecules as promising scaffolds for cardiac tissue engineering
Saghebasl, S., Akbarzadeh, A., Gorabi, A. M., Nikzamir, N., Seyed-Sadjadi, M., & Mostafavi, E. (2022) · Polymers for Advanced Technologies · doi:10.1002/pat.5669 · Cited by 33
In vitro and in vivo neo-cartilage formation by heterotopic chondrocytes seeded on PGA scaffolds
Lohan, A., Marzahn, U., Sayed, K. E., Haisch, A., Kohl, B., Müller, R. D., Ertel, W., Schulze-Tanzil, G. G., & John, T. (2011) · Histochemistry and Cell Biology · doi:10.1007/s00418-011-0822-2 · Cited by 30
“PGA is a biodegradable biomaterial with well-characterized biocompatibility (Athanasiou et al. 1995; Gunatillake and Adhikari 2003).”
BackgroundHenriksen, S. S., Ding, M. L., Juhl, M. V., Theilgaard, N., & Overgaard, S. (2011) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-011-4290-y · Cited by 31
“resilience associated with the hydrophobic PDLLA is not due to its ability to bind water, but more to its bonds and overall structure [7].”
BackgroundBioinspired Nanocomposites for Orthopedic Applications
Liu, H. H., & Webster, T. J. (2007) · WORLD SCIENTIFIC eBooks · doi:10.1142/9789812779656_0001 · Cited by 34
Dias, D., Vale, A. C., Cunha, E., Paiva, M. C., Reis, R. L., Vaquette, C., & Alves, N. M. (2020) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34761 · Cited by 30
“Regarding scaffolds for bone regeneration, different biodegradable polymers have been recognized as potential candidates, for instance, polycaprolactone (PCL), polylactic acid (PLA), and also natural polymers such as chitosan and collagen.(7) Depending on the”
BackgroundPorto, I. C. C. D. M. (2012) · InTech eBooks · doi:10.5772/47786 · Cited by 53
Biodegradable Polymers in Drug Delivery
Jain, J. P., Ayen, W. Y., Domb, A. J., & Kumar, N. (2011) · Wiley eBooks · doi:10.1002/9781118015810.ch1 · Cited by 44
Synthesis, Structure, and Properties of Biopolymers (Natural and Synthetic)
Francis, R., Sasikumar, S., & Gopalan, G. P. (2013) · Polymer Composites · doi:10.1002/9783527674220.ch2 · Cited by 39
Rechichi, A., Ciardelli, G., D’Acunto, M., Vozzi, G., & Giusti, P. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31349 · Cited by 34
Gu, B. K., Park, S. J., & Kim, C. (2017) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2017.1364097 · Cited by 29
“To fulfill this role, scaffolds should constitute an environment similar to that of the target tissue and exhibit mechanical stability as well as biocompatibility and biodegradability [3,4].”
BackgroundSynthetic biology approaches: Towards sustainable exploitation of marine bioactive molecules
Kiran, G. S., Ramasamy, P., Sekar, S., Meenatchi, R., Hassan, S., Ninawe, A. S., & Selvin, J. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.01.149 · Cited by 31
Lim, K., Saravanan, R., Chong, K. K. L., Goh, S. H. M., Chua, R. R. Y., Tambyah, P. A., Chang, M. W., Kline, K. A., & Leong, S. S. J. (2018) · Biotechnology and Bioengineering · doi:10.1002/bit.26713 · Cited by 30
“Current studies underway show that the remaining entrapped peptides will be released gradually over a period of 2–3 months, with progressive degradation of the PCL polymer (Gunatillake & Adhikari, 2003; Lan et al., 2017).”
BackgroundMonnier, A., Tawil, E. A., Nguyen, Q. T., Valleton, J., Fatyeyeva, K. Y., & Deschrevel, B. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.08.011 · Cited by 31
Aworinde, A. K., Adeosun, S. O., Oyawale, F. A., et al. (2019) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1378/2/022060 · Cited by 29
“In contrast with metals, PLA is biocompatible, biodegradable, bioresorbable and non-carcinogenic [5], [16]–[19].”
BackgroundImato, K., Nakajima, H., Yamanaka, R., & Takeda, N. (2020) · Polymer Journal · doi:10.1038/s41428-020-00432-4 · Cited by 28
A Mathematical Model of Liver Cell Aggregation In Vitro
Green, J. E. F., Waters, S. L., Shakesheff, K. M., & Byrne, H. M. (2008) · Bulletin of Mathematical Biology · doi:10.1007/s11538-008-9387-1 · Cited by 29
“(2002)) The types of ECM used in liver tissue engineering include collagen gels and polylactic acid (PLA); for the former, μE ∼ 10 5 Pa and E ∼ 10 − 10(1) Pa (Velegol and Lanni, 2001), whilst for the latter, μE ∼ 10 5 − 10(8) Pa and E ∼ 10(6) − 10(9) Pa (Chen et al., 2003; Gunatillake and Adhikari, 2003; Namy et al.,…”
Nojehdehian, H., Moztarzadeh, F., Baharvand, H., Mehrjerdi, N. Z., Nazarian, H., & Tahriri, M. (2010) · The International Journal of Artificial Organs · doi:10.5301/ijao.2010.5981 · Cited by 38
Cartmill, B., Parham, D. M., Strike, P. W., et al. (2014) · Orbit · doi:10.3109/01676830.2014.950285 · Cited by 29
Bio-based hyperbranched poly(ester amide)–MWCNT nanocomposites: multimodalities at the biointerface
Pramanik, S., Konwarh, R., Barua, N., Buragohain, A. K., & Karak, N. (2013) · Biomaterials Science · doi:10.1039/c3bm60170f · Cited by 29
Quinlan, E., Thompson, E. M., Matsiko, A., O’Brien, F. J., & López‐Noriega, A. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500439 · Cited by 33
Ghosal, K., Sarkar, P., Chakraborty, D., Das, S., & Sarkar, K. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c03566 · Cited by 30
Ozkendir, O., Karaca, I., Cullu, S., Erdoğan, O. C., Yaşar, H. N., Dıkıcı, S., Owen, R., & Dikici, B. A. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213732 · Cited by 34
Review: functionalization of biopolymer-based electrospun nanofibers for wound healing
Ekram, B. (2025) · Journal of Materials Science · doi:10.1007/s10853-025-10931-5 · Cited by 34
“When polyglycolic acid (PGA) is broken down physiologically, it produces glycolic acids, which can enter the tricarboxylic acid cycle and leave the body as CO 2 and water, so its biodegradation products are non-toxic [211].”
Surface characterization, collagen adsorption and cell behaviour on poly(L-lactide-co-glycolide).
Adamczak, M., Ścisłowska‐Czarnecka, A., Genet, M. J., Dupont‐Gillain, C. C., & Pamuła, E. (2011) · PubMed · Cited by 28
Polyanhydrides of Castor Oil–Sebacic Acid for Controlled Release Applications
Natarajan, J., Rattan, S., Singh, U., Madras, G., & Chatterjee, K. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie500679u · Cited by 31
Yang, G. H., Kim, M., & Kim, G. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/015005 · Cited by 28
Biocompatibility of dental biomaterials
Ibrahim, M., El‐Wassefy, N. A., & Farahat, D. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100961-1.00008-6 · Cited by 36
Osi, B., Khoder, M., Al-Kinani, A. A., & Alany, R. G. (2022) · Pharmaceutical Development and Technology · doi:10.1080/10837450.2022.2055063 · Cited by 31
Gholivand, K., Mohammadpour, M., Ardebili, S. A. A., Malekshah, R. E., & Samadian, H. (2022) · Scientific Reports · doi:10.1038/s41598-022-18632-8 · Cited by 31
Thiol‐ene‐Based 3D Printing of Bioresorbable Fumarate‐Based ABA Triblock Copolyester Elastomers
Yeazel, T. R., Davis, A. G., & Becker, M. L. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201904 · Cited by 30
Biodegradable Orthopedic Implants
Park, H., Temenoff, J. S., & Mikos, A. G. (2007) · Springer eBooks · doi:10.1007/978-1-84628-366-6_4 · Cited by 32
“Different degradation rates can be achieved by the addition of lactide groups, because carboxylic acids released by the degradation of the lactide segments facilitate the degradation of the orthoester [32].”
BackgroundMethodInfluentialPark, J.-H., Han, C., Lee, E., & Kim, H. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.06.020 · Cited by 27
McCarthy, C. W., Ahrens, D. C., Joda, D., Curtis, T. E., Bowen, P. K., Guillory, R. J., Liu, S. Q., Zhao, F., Frost, M. C., & Goldman, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b03892 · Cited by 29
Tuneable hydrolytic degradation of poly(l-lactide) scaffolds triggered by ZnO nanoparticles
Lizundia, E., Mateos, P., & Vilas‐Vilela, J. L. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.02.104 · Cited by 28
Cui, J., Zhou, Z., Yang, Y., Liu, W., Zhao, Y., Peng, C., Huang, T., Zhou, H., Liu, L., & Zhang, Q. (2017) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2017.1344819 · Cited by 27
Ma, X., Oyamada, S., Wu, T., et al. (2011) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.33016 · Cited by 28
Bone Tissue Engineering Scaffolds: Materials and Methods
Manohar, S. S., Das, C., & Kakati, V. S. (2022) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2022.0216 · Cited by 32
“39 They are more uniform and have predictable responses toward chemical as well as mechanical properties.”
Nano-Based Drug Delivery Systems for Managing Diabetes: Recent Advances and Future Prospects
Liu, M., Wang, R., Hoi, M. P. M., Wang, Y., Wang, S., Li, G., Vong, C. T., & Chong, C. (2025) · International Journal of Nanomedicine · doi:10.2147/ijn.s508875 · Cited by 38
“It regulates blood glucose levels by enhancing insulin secretion and reducing https://doi.org/10.2147/IJN.S508875 International Journal of Nanomedicine 2025:20 phosphoenolpyruvate carboxykinase levels.”
InfluentialExploiting novel sterilization techniques for porous polyurethane scaffolds
Bertoldi, S., Farè, S., Haugen, H. J., & Tanzi, M. C. (2015) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-015-5509-0 · Cited by 30
“Therefore, in the last years increasing attention was paid to porous PU structures, in particular for bone [4–8] and cartilage [9–11] regen-”
BackgroundRecent biomedical applications and patents on biodegradable polymer
Kaur, T., Kaur, R., & Kaur, A. (2014) · Cited by 36
Biodegradable Polymers for Potential Delivery Systems for Therapeutics
Pandey, S. K., Haldar, C., Patel, D. K., & Maiti, P. (2013) · Advances in polymer science · doi:10.1007/12_2012_198 · Cited by 31
Electrospinning Technology in Tissue Regeneration
Castaño, Ó., Eltohamy, M. R., & Kim, H. (2011) · Methods in molecular biology · doi:10.1007/978-1-61779-388-2_9 · Cited by 27
Properties and Applications of Biodegradable Polymers
Patwary, M. A. S., Surid, S. M., & Gafur, M. A. (2020) · Journal of Research Updates in Polymer Science · doi:10.6000/1929-5995.2020.09.03 · Cited by 38
“Solvent casting, particular leaching method and compression moulding are also used to fabricate PGA based implants [59].”
MethodNajafabadi, F. M., Karbasi, S., Benisi, S. Z., & Shojaei, S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.125218 · Cited by 28
Li, B., Yang, J., Ma, L., Li, F., Tu, Z., & Gao, C. (2013) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0065 · Cited by 28
“46 Moreover, the phagocytic populations such as macrophages are probably recruited to clear out the degradation products in a particulate format, 47,48 and thereby secret inflammatory cytokines.”
Salerno, A., Fernández‐Gutiérrez, M., del Barrio, J. S. R., & Domingo, C. (2014) · RSC Advances · doi:10.1039/c4ra07732f · Cited by 27
Surface characterization of biopolyurethanes based on cellulose derivatives
Macocinschi, D., Filip, D., Butnaru, M., & Dimitriu, D. C. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3626-8 · Cited by 26
Ergun, A., Yu, X., Valdevit, A. D. C., et al. (2011) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.33190 · Cited by 27
Gerhardt, L. ‐., Widdows, K. L., Erol, M., Nandakumar, A., Roqan, I. S., Ansari, T., & Boccaccini, A. R. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34373 · Cited by 30
Macocinschi, D., Filip, D., Vlad, S., Tuchiluş, C., Cristian, A., & Bãrboiu, M. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb21361g · Cited by 27
Regulation of Epithelial-to-Mesenchymal Transition Using Biomimetic Fibrous Scaffolds
Ravikrishnan, A., Özdemir, T., Bah, M., Baskerville, K. A., Shah, S. I., Rajasekaran, A. K., & Jia, X. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05646 · Cited by 27
“applications.(34-36) Various surface modification methods have been applied to the PCL fibers to 25”
MethodGenerali, M., Kehl, D., Capulli, A. K., Parker, K. K., Hoerstrup, S. P., & Weber, B. (2017) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2017.06.046 · Cited by 29
Adamović, D., Ristic, B. M., & Živić, F. (2017) · Springer eBooks · doi:10.1007/978-3-319-68025-5_3 · Cited by 37
Drug-releasing biopolymeric structures manufactured via stereolithography
Asikainen, S., van Bochove, B., & Seppälä, J. V. (2018) · Biomedical Physics & Engineering Express · doi:10.1088/2057-1976/aaf0e0 · Cited by 31
“PCL was chosen as the polymer matrix due to its slow degradation time [44,45] and low swelling in water [8], as excluding these factors allows focusing on the effect of the pore architecture on the drug release.”
MethodBiomaterials and scaffolds for musculoskeletal tissue engineering
Francois, E. L., Dorcemus, D. L., & Nukavarapu, S. P. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-301-0.00001-x · Cited by 36
Ramos, D. M., Peach, M. S., Mazzocca, A. D., et al. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-301-0.00008-2 · Cited by 27
Using Polymeric Scaffolds for Vascular Tissue Engineering
Abruzzo, A., Fiorica, C., Palumbo, V. D., Altomare, R., Damiano, G., Gioviale, M. C., Tomasello, G., Licciardi, M., Palumbo, F. S., Giammona, G., et al. (2014) · International Journal of Polymer Science · doi:10.1155/2014/689390 · Cited by 35
“These polymers have been used as sutures [70] plates and fixtures for fracture fixation devices [71] and scaffolds for cell transplantation [72, 73].”
MethodChoudhary, S., Dubey, A., Singh, A., Zamboni, P., Gupta, N., Singh, R., Tisato, V., Aggarwal, L. M., & Gemmati, D. (2025) · Exploration of BioMat-X · doi:10.37349/ebmx.2025.101351 · Cited by 32
Vascular Tissue Engineering: Advanced Techniques and Gene Editing in Stem Cells for Graft Generation
Chen, S.-G., Ugwu, F. N., Li, W., Caplice, N. M., Petcu, E. B., Yip, S. P., & Huang, C. (2020) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2019.0264 · Cited by 26
“26 Readers interested in this field can find more details in a very recent review.”
Order from Disorder with Intrinsically Disordered Peptide Amphiphiles
Jacoby, G., Asher, M. S., Ehm, T., Abutbul-Ionita, I., Shinar, H., Azoulay-Ginsburg, S., Zemach, I., Koren, G., Danino, D., Kozlov, M., et al. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c06133 · Cited by 18
Kurowiak, J., Mackiewicz, A., Klekiel, T., & Będziński, R. (2022) · Materials · doi:10.3390/ma15031225 · Cited by 26
Synthetic biodegradable polyesters for implantable controlled-release devices
Pothupitiya, J. U., Zheng, C., & Saltzman, W. M. (2022) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2022.2131768 · Cited by 29
“0 GPa Lactic acid, Glycolic acid 5–6 [88]”
BackgroundInfluentialBioglass-polymer composite scaffolds for bone tissue regeneration: a review of current trends
Motameni, A., Çardaklı, İ. S., Gürbüz, R., Alshemary, A. Z., Razavi, M., & Farukoğlu, Ö. C. (2023) · International Journal of Polymeric Materials · doi:10.1080/00914037.2023.2186864 · Cited by 26
Dodda, J. M., Azar, M. G., Bělský, P., Šlouf, M., Gajdošová, V., Kasi, P. B., Anerillas, L. O., & Kovářík, T. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126654 · Cited by 29
Rigid biodegradable photopolymer structures of high resolution using deep-UV laser photocuring
Brandi, F., Anjum, F., Ceseracciu, L., Barone, A. C., & Athanassiou, A. (2011) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/21/5/054007 · Cited by 26
Brochhausen, C., Zehbe, R., Watzer, B., Halstenberg, S., Gabler, F., Schubert, H., & Kirkpatrick, C. J. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32215 · Cited by 27
Characterization of Ceramic Filled Polymer Matrix Composite Used for Biomedical Applications
Hanna, W. A., Gharib, F. E., & Marhoon, I. I. (2011) · Journal of Minerals and Materials Characterization and Engineering · doi:10.4236/jmmce.2011.1012089 · Cited by 26
“Since the 1990s, the applications of poly(glycolic acid) (PGA), poly(lactic acid) (PLA), and their copolymers (PLGA) in bone tissue engineering have been investigated extensively [2].”
BackgroundAbbasi, N., Soudi, S., Roodbari, N. H., Dodel, M., & Soleimani, M. (2014) · PubMed Central · Cited by 38
Hu, K., Bao, L., Chen, X., Xiao, Y., & Lei, J. (2016) · Advances in Polymer Technology · doi:10.1002/adv.21760 · Cited by 25
Micro‐Nanostructures of Cellulose‐Collagen for Critical Sized Bone Defect Healing
Aravamudhan, A., Ramos, D. M., Nip, J., Kalajzić, I., & Kumbar, S. G. (2017) · Macromolecular Bioscience · doi:10.1002/mabi.201700263 · Cited by 26
Nanopatterned Scaffolds for Neural Tissue Engineering and Regenerative Medicine
Park, S., Kim, D., Park, S., Kim, S., Lee, D., Kim, W., & Kim, J. (2018) · Advances in experimental medicine and biology · doi:10.1007/978-981-13-0950-2_22 · Cited by 30
Qian (2010) · International Journal of Nanomedicine · doi:10.2147/ijn.s13169 · Cited by 30
Niaounakis, M. (2014) · Elsevier eBooks · doi:10.1016/b978-0-323-26698-7.00001-5 · Cited by 35
Metadata
- Authors
- CSIRO Molecular Science, B. 1., & Gunatillake, P.
- Corresponding author
- CSIRO Molecular Science, Bag 10, Clayton South MDC, Vic 3169, Australia
- Venue
- European Cells and Materials
- Publisher
- Forum Multimedia Publishing LLC
- Published
- 2003-10-01
- Volume
- 5
- Pages
- 1-16
- ISSN
- 1473-2262 (ISSN-L)
- OpenAlex
- W2106035984
- Cited by
- 1,765
- References
- 97
- Citations by year
- 2026: 43 · 2025: 61 · 2024: 59 · 2023: 80 · 2022: 90 · 2021: 112 · 2020: 102 · 2019: 115 · 2018: 105 · 2017: 128 · 2016: 110 · 2015: 106 · 2014: 110 · 2013: 91 · 2012: 86
- FWCI
- 1.32
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- Locations
- European Cells and Materials (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Health Sciences › Medicine › Surgery › Surgical Sutures and Adhesives
- Keywords
- tissue engineering, polyesters, polyglycolic acid, polylactic acid, polyanhydrides, polyphosphazenes, polyurethane, poly(propylene fumarate), injectable polymers, orthopedic tissue engineering, biodegradation, biocompatibility, degradation products
- MeSH terms
- Biocompatible Materials, Models, Chemical, Polymers, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.