Thermo-Rheological and Shape Memory Properties of Block and Random Copolymers of Lactide and ε-Caprolactone
Open accessThe DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index; 5 of the 24 sources its claims cite were checked for support.
Abstract
Biodegradable block and random copolymers have attracted numerous research interests in different areas, due to their capability to provide a broad range of properties. In this paper, an efficient strategy has been reported for preparing biodegradable PCL-PLA copolymers with improved thermal, mechanical and rheological properties. Two block-copolymers are synthesized by sequential addition of the cyclic esters lactide (L-LA or D,L-LA) and ε-caprolactone (CL) in presence of a dimethyl(salicylaldiminato)aluminium compound. The random copolymer of L-LA and CL was synthetized by using the same catalyst. Chain structure, molar mass, thermal, rheological and mechanical properties are characterized by NMR, SEC, TGA, DSC, Rheometry and DMTA. Experimental results show that by changing the stereochemistry and monomer distribution of the copolymers it is possible to obtain a variety of properties. Promising shape-memory properties are also observed in the di-block copolymers characterized by the co-crystallization of CL and L-LA segments. These materials show great potential to substitute oil-based polymers for packaging, electronics, and medicine applications.
Overview
CoChat Summary
## TL;DR
This paper reports the synthesis of three biodegradable PLA/PCL copolymers—two block copolymers and one random copolymer—and shows that their thermal, rheological, and shape-memory behavior depends strongly on stereochemistry and monomer distribution. The Block-L sample is highlighted as having the best shape-memory performance, with recovery ratios above 99% in the best case and fixity up to 85%.
## Key findings
- Two block copolymers, poly(L-lactide-block-ε-caprolactone) and poly(D,L-lactide-block-ε-caprolactone), and one random poly(L-lactide-co-ε-caprolactone) were successfully prepared using the same aluminium catalyst; the block copolymers were obtained by sequential monomer addition.
- For the random copolymer, NMR showed heterosequences and a CL–LA heterodiad content of 24%; 13C NMR showed all eight triads expected for a binary random copolymer.
- Thermal degradation depended on composition: for the homopolymers, T5% was 312 °C for PLA and 355 °C for PCL; in the copolymers, increasing ε-CL content improved thermal stability, and the degradation curves showed multiple steps attributable to LA and ε-CL segments.
- In DSC, the random copolymer (Ran) did not crystallize under the selected cooling conditions, whereas Block-L showed two melting peaks at 60 °C and 160 °C and an additional cold-crystallization-related feature.
- Shape-memory testing showed that only Block-L could fix a temporary shape and recover its initial shape; in the best case, Rr > 99% and Rf = 85%.
## Methods
- The study synthesized three PLA/PCL copolymers by ring-opening polymerization in toluene at 90 °C using dimethyl(salicylaldiminato)aluminium compound (I) activated by benzyl alcohol: two block copolymers via sequential addition of LA then CL, and one random copolymer from mixed monomers.
- Samples were characterized by NMR, SEC/GPC, TGA, DSC, rheometry, and DMTA; molecular weight/dispersity, thermal transitions, degradation behavior, viscoelastic response, and shape-memory properties were measured.
- Shape-memory performance was tested with cyclic thermo-mechanical DMA protocols on molded films (100–110 µm thick), using defined deformation temperatures, cooling, unloading, and reheating steps.
## Limitations
- The paper itself only states results for the selected experimental conditions; for example, the random copolymer did not crystallize under the chosen cooling rate (10 °C/min), so the crystallization behavior is condition-dependent.
- The shape-memory test was reported only for Block-L in the text provided, so comparative shape-memory performance across all three copolymers is not fully stated in the paper text provided.
- Evident from the text: the work uses a small set of three copolymers with similar composition but different microstructure, so the scope is limited to these specific materials and conditions.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures










Verification
Claims the paper makes
4 Valid · 2 Not valid · 8 Not checked · 78 Own results and interpretations
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Two block-copolymers are synthesized by sequential addition of the cyclic esters lactide (L-LA or D,L-LA) and ε-caprolactone (CL) in presence of a dimethyl(salicylaldiminato)aluminium compound.”
§ Thermo-Rheological and Shape Memory Properties of Block and Random Copolymers of Lactide and ε-Caprolactone > Abstract
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Promising shape-memory properties are also observed in the di-block copolymers characterized by the co-crystallization of CL and L-LA segments.”
§ Thermo-Rheological and Shape Memory Properties of Block and Random Copolymers of Lactide and ε-Caprolactone > Abstract
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Their thermal and rheological properties are found strongly dependent by the molecular structures.”
§ Thermo-Rheological and Shape Memory Properties of Block and Random Copolymers of Lactide and ε-Caprolactone > 1. Introduction
boostedstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“in this latter case, the percentage of CL−LA heterodiads was 24%.”
§ Thermo-Rheological and Shape Memory Properties of Block and Random Copolymers of Lactide and ε-Caprolactone > 3. Results > 3.1. Synthesis of Block and Random LA/CL Copolymers
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A claim is checked only against the cited paper’s full text, never its abstract, and none is available for its sources.
In the paper
“As expected, the PLA degrade at temperatures lower than that of PCL [45,46].”
§ Thermo-Rheological and Shape Memory Properties of Block and Random Copolymers of Lactide and ε-Caprolactone > 3. Results > 3.2. Thermogravimetric Analysis
What the sources say
- Not checked — no full text of the sourcecites [45] Gorrasi, 2013, Photo-oxidative stabilization of carbon nanotubes on polylactic acid, Polym. Degrad. Stab. source
- Not checked — no full text of the sourcecites [46] Vertuccio, 2009, Nano clay reinforced PCL/starch blends obtained by high energy ball milling, Carbohydr. Polym. source
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
53 more claims
Create a free account to see all 92 claims and every source verdict.
- It may state two separate claims as one. 26
- Probably not a substantial claim. 12
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“PLA has three isomeric forms, namely, optically active poly(l-lactide) (PLLA) and poly(d-lactide) (PDLA), racemic poly(dl-lactide) (PDLLA), where PLLA and PDLA are semi-crystalline polymers and PDLLA is an amorphous polymer.8”
From Crystallization, thermal and mechanical properties of stereocomplexed poly(lactide) with flexible PLLA/PCL multiblock copolymer (2022) · cites this paper as [8]
Citations
Cites
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582 · cited 2×
“Their synthesis can be achieved by the ring-opening polymerization (ROP) of the cyclic esters lactide (LA) and ε-caprolactone (CL), respectively [4,5].”
BackgroundThe in vivo degradation, absorption and excretion of PCL-based implant
Sun, H., Mei, L., Song, C., Cui, X., & Wang, P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.09.019 · Cited by 976 · cited 1×
“The PCL has been exploited in the biomedical field to develop long-term delivery system or scaffolds for bone tissue engineering [13,14].”
MethodShape memory polymers: Past, present and future developments
Hager, M. D., Bode, S., Weber, C., & Schubert, U. S. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.002 · Cited by 950 · cited 2×
“In particular, Rc indicates the ability of the material to hold the imposed strain in the stress-free state (ratio between strain after and before stress removal at 20 ◦C), while Rr indicates its ability to recovery its initial shape (ratio between strain after and before sample heating at Td) [43].”
BackgroundMethodBiodegradable poly(lactic acid) polymers
Kulkarni, R. K., Moore, E. G., Hegyeli, A. F., & Leonard, F. (1971) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820050305 · Cited by 799 · cited 1×
“PLA can be derived from several renewable resources such as the fermentation products of starch [8].”
BackgroundNature or Petrochemistry?—Biologically Degradable Materials
Mecking, S. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200301655 · Cited by 589 · cited 2×
“In recent years, constant scientific efforts have been dedicated to the production of synthetic biodegradable polymers with a reduced environmental impact [3].”
BackgroundSynthesis of Poly(Lactic Acid): A Review
Mehta, R., Kumar, V., Bhunia, H., & Upadhyay, S. N. (2005) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1080/15321790500304148 · Cited by 510 · cited 1×
“catalysts, will produce instead an amorphous polymer, the poly-(D,L-lactide), with a glass transition temperature close to 50 ◦C [10].”
BackgroundMonocryl® suture, a new ultra-pliable absorbable monofilament suture
Bezwada, R. S., Jamiolkowski, D. D., Lee, I.-Y., Agarwal, V., Persivale, J., Trenka-Benthin, S., Erneta, M., Suryadevara, J., Yang, A., & Liu, S. (1995) · Biomaterials · doi:10.1016/0142-9612(95)93577-z · Cited by 391 · cited 1×
“The PCL has been exploited in the biomedical field to develop long-term delivery system or scaffolds for bone tissue engineering [13,14].”
MethodNavarro-Baena, I., Sessini, V., Dominici, F., Torre, L., Kenny, J. M., & Peponi, L. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.03.037 · Cited by 303 · cited 1×
“The shape-memory properties have been quantified by cyclic thermo-mechanical tests [43,54].”
MethodMechanical milling as a technology to produce structural and functional bio-nanocomposites
Gorrasi, G., & Sorrentino, A. (2015) · Green Chemistry · doi:10.1039/c5gc00029g · Cited by 260 · cited 1×
“However, the problem related to their end-of-life disposal presents an environmental challenge that is no longer sustainable in the long term [1,2].”
BackgroundSelf-citationCastillo, R. V., & Müller, A. J. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.03.002 · Cited by 253 · cited 1×
“In the case of PCL-PLA copolymers, since both PCL and PLLA are crystalline blocks, the crystallization of each block is affected by the respective monomer distributions [50].”
BackgroundRandom Copolymerization of ε-Caprolactone with Lactide Using a Homosalen−Al Complex
Nomura, N., Akita, A., Ishii, R., & Mizuno, M. (2010) · Journal of the American Chemical Society · doi:10.1021/ja9089395 · Cited by 222
Jacobs, C., Dubois, P., Jerome, R., & Teyssie, P. (1991) · Macromolecules · doi:10.1021/ma00011a001 · Cited by 218
Rheology and Processing of Polymeric Materials: Volume 1: Polymer Rheology
Han, C. D. (2007) · doi:10.1093/oso/9780195187823.001.0001 · Cited by 217
Pappalardo, D., Annunziata, L., & Pellecchia, C. (2009) · Macromolecules · doi:10.1021/ma9010439 · Cited by 199 · cited 4×
“[20,29] have described dimethyl(salicylaldiminato)aluminium compounds in the ring-opening polymerization of caprolactone and lactides disclosing a wellcontrolled polymerization with absence of transesterification reaction and a certain living behavior of the polymerization, when the phenyl substituent on the phenoxyim…”
BackgroundInfluentialSelf-citationBiocompatibility of Resorbable Polymers: A Historical Perspective and Framework for the Future
Pappalardo, D., Mathisen, T., & Finne-Wistrand, A. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00159 · Cited by 177 · cited 3×
“For instance, for biomedical applications, because the glass transition temperature of poly-(D,L-lactide) (PDLLA) and poly(L-lactide) (PLLA) is well above the human body temperature, these materials are too stiff [6].”
BackgroundSelf-citationGleadall, A., Pan, J., Kruft, M.-A., & Kellomäki, M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.039 · Cited by 165 · cited 1×
“It was found that the degradation rate increase by increasing the LA amount and by the degree of randomness in the case of CL/LA copolymers [21].”
BackgroundCrystallization kinetics of virgin and processed poly (lactic acid)
Pantani, R., De Santis, F., Sorrentino, A., De Maio, F., & Titomanlio, G. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.04.018 · Cited by 161 · cited 1×
“Homochiral isotactic PLA (either PLLA or PDLA) shows a melting transition of 180 ◦C and a glass transition in the range 55–60 ◦C [9].”
BackgroundSelf-citationHamley, I. W., Castelletto, V., Castillo, R. V., Müller, A. J., Martin, C. M., Pollet, E., & Dubois, P. (2005) · Macromolecules · doi:10.1021/ma0481499 · Cited by 160 · cited 1×
“Conversely, the crystallization of PLA is negatively affected as the PCL content increases [52].”
BackgroundCharacterization of drawn and undrawn poly-L-lactide films by differential scanning calorimetry
Turner, J. F., Riga, A. T., O’Connor, A., Zhang, J., & Collis, J. (2004) · Journal of Thermal Analysis and Calorimetry · doi:10.1023/b:jtan.0000017347.08469.b1 · Cited by 148 · cited 7×
“The melting peak associated with this phase has an enthalpy value (∆Hf = 37 J/g) larger than that showed by the Block-D,L peak.”
InfluentialNano clay reinforced PCL/starch blends obtained by high energy ball milling
Vertuccio, L., Gorrasi, G., Sorrentino, A., & Vittoria, V. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.07.020 · Cited by 142 · cited 1×
“As expected, the PLA degrade at temperatures lower than that of PCL [45,46].”
BackgroundSelf-citationBouyahyi, M., & Duchateau, R. (2014) · Macromolecules · doi:10.1021/ma402072t · Cited by 125 · cited 1×
“Their synthesis can be achieved by the ring-opening polymerization (ROP) of the cyclic esters lactide (LA) and ε-caprolactone (CL), respectively [4,5].”
BackgroundBiodegradability Evaluation of Polymers by ISO 14855-2
Funabashi, M., Ninomiya, F., & Kunioka, M. (2009) · International Journal of Molecular Sciences · doi:10.3390/ijms10083635 · Cited by 111 · cited 1×
“At variance with PLA, the PCL is a highly processable polymer, highly hydrophobic, with a degradation time of about two years [15].”
BackgroundHamley, I. W., Parras, P., Castelletto, V., Castillo, R. V., Müller, A. J., Pollet, E., Dubois, P., & Martin, C. M. (2006) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200600085 · Cited by 108 · cited 1×
“In this case, PLA is solid at the crystallization temperatures of PCL and it can act both as a nucleating agent and as an obstacle to the formation of PCL crystals [51].”
BackgroundWang, C., Liu, Y., Guo, Y., Ma, L., Liu, Y., Zhou, C., Yu, X., & Zhao, G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125367 · Cited by 107 · cited 1×
“The relationship between polymer deformation or phase transition and properties is quite similar to the relationship existing in some inorganic materials [55,56].”
BackgroundLi, G., Lamberti, M., Pappalardo, D., & Pellecchia, C. (2012) · Macromolecules · doi:10.1021/ma3019848 · Cited by 106
Self-citationWang, C., Liu, Y., Feng, X., Zhou, C., Liu, Y., Yu, X., & Zhao, G. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201903121 · Cited by 106
Shen, Y., Zhu, K. J., Shen, Z., & Yao, K.-M. (1996) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(19960715)34:9<1799::aid-pola18>3.0.co;2-1 · Cited by 93
Meduri, A., Fuoco, T., Lamberti, M., Pellecchia, C., & Pappalardo, D. (2014) · Macromolecules · doi:10.1021/ma402174y · Cited by 89
Self-citationFijten, M. W. M., Kranenburg, J. M., Thijs, H. M. L., Paulus, R. M., van Lankvelt, B. M., de Hullu, J., Springintveld, M., Thielen, D. J. G., Tweedie, C. A., Hoogenboom, R., et al. (2007) · Macromolecules · doi:10.1021/ma070720r · Cited by 84 · cited 1×
“Experimental results found with random and block copolymers of 2-ethyl2-oxazoline and 2-nonyl-2-oxazoline showed a gradual transition from viscous to elastic behavior as crystallinity increased [49].”
ResultPilone, A., De Maio, N., Press, K., Venditto, V., Pappalardo, D., Mazzeo, M., Pellecchia, C., Kol, M., & Lamberti, M. (2015) · Dalton Transactions · doi:10.1039/c4dt02616k · Cited by 83
Self-citationFuoco, T., & Pappalardo, D. (2017) · Catalysts · doi:10.3390/catal7020064 · Cited by 83 · cited 1×
“[20,29] have described dimethyl(salicylaldiminato)aluminium compounds in the ring-opening polymerization of caprolactone and lactides disclosing a wellcontrolled polymerization with absence of transesterification reaction and a certain living behavior of the polymerization, when the phenyl substituent on the phenoxyim…”
BackgroundSelf-citationBack to plastic pollution in COVID times
Gorrasi, G., Sorrentino, A., & Lichtfouse, É. (2020) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01129-z · Cited by 76
Self-citationBlock versus Random Amphiphilic Glycopolymer Nanopaticles as Glucose-Responsive Vehicles
Guo, Q., Zhang, T., An, J., Wu, Z., Zhao, Y., Dai, X., Zhang, X., & Li, C. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b01020 · Cited by 75
Colby, R. H. (1996) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(96)80113-0 · Cited by 72
Shao, Y., Jia, Y.-G., Shi, C., Luo, J., & Zhu, X. X. (2014) · Biomacromolecules · doi:10.1021/bm5002262 · Cited by 67
Gupta, B., Geeta, & Ray, A. R. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.34728 · Cited by 58 · cited 7×
“The melting peak associated with this phase has an enthalpy value (∆Hf = 37 J/g) larger than that showed by the Block-D,L peak.”
InfluentialJiang, Z., Liu, H., He, H., Ribbe, A. E., & Thayumanavan, S. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b02595 · Cited by 57
Redox-Responsive Disulfide Cross-Linked PLA-PEG Nanoparticles
Fuoco, T., Pappalardo, D., & Finne-Wistrand, A. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01318 · Cited by 56 · cited 1×
“, glycolide, lactide and caprolactone [30,31], but also oflarge ring macrolactone [32,33] and ofnovel synthetized thiol-functionalized lactide [34,35].”
BackgroundPhoto-oxidative stabilization of carbon nanotubes on polylactic acid
Gorrasi, G., & Sorrentino, A. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.02.012 · Cited by 54 · cited 1×
“As expected, the PLA degrade at temperatures lower than that of PCL [45,46].”
BackgroundPappalardo, D., Tedesco, C., & Pellecchia, C. (2002) · European Journal of Inorganic Chemistry · doi:10.1002/1099-0682(200203)2002:3<621::aid-ejic621>3.0.co;2-e · Cited by 47
Self-citationFuoco, T., Finne-Wistrand, A., & Pappalardo, D. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00005 · Cited by 46 · cited 1×
“, glycolide, lactide and caprolactone [30,31], but also oflarge ring macrolactone [32,33] and ofnovel synthetized thiol-functionalized lactide [34,35].”
BackgroundSelf-citationDella Monica, F., Luciano, E., Buonerba, A., Grassi, A., Milione, S., & Capacchione, C. (2014) · RSC Adv. · doi:10.1039/c4ra10255j · Cited by 44
D'auria, I., Mazzeo, M., Pappalardo, D., Lamberti, M., & Pellecchia, C. (2011) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.24447 · Cited by 44 · cited 1×
“Several research efforts have focused on the synthesis of well-defined LA/CL copolymeric chain, either block [17,18,20,24], or random [19,25–28].”
BackgroundSelf-citationSperanza, V., Sorrentino, A., De Santis, F., & Pantani, R. (2014) · The Scientific World JOURNAL · doi:10.1155/2014/720157 · Cited by 42 · cited 1×
“On the contrary, the poly(ε-caprolactone) (PCL) is in the rubbery state at room temperature, showing a glass transition temperature at about −60 ◦C and a melting point at about 65 ◦C [12].”
BackgroundD'Auria, I., D'Alterio, M. C., Tedesco, C., & Pellecchia, C. (2019) · RSC Advances · doi:10.1039/c9ra07133d · Cited by 40
Fuoco, T., Meduri, A., Lamberti, M., Venditto, V., Pellecchia, C., & Pappalardo, D. (2015) · Polymer Chemistry · doi:10.1039/c4py01445f · Cited by 38 · cited 1×
“, glycolide, lactide and caprolactone [30,31], but also oflarge ring macrolactone [32,33] and ofnovel synthetized thiol-functionalized lactide [34,35].”
BackgroundSelf-citationSynthesis, Solid-State Structure, and Surface Properties of End-Capped Poly( l -lactide)
Kobori, Y., Iwata, T., Doi, Y., & Abe, H. (2004) · Biomacromolecules · doi:10.1021/bm034382n · Cited by 28 · cited 7×
“The melting peak associated with this phase has an enthalpy value (∆Hf = 37 J/g) larger than that showed by the Block-D,L peak.”
InfluentialModulation of Biodegradation Rate of Poly(lactic acid) by Silver Nanoparticles
Gorrasi, G., Sorrentino, A., & Pantani, R. (2015) · Journal of Polymers and the Environment · doi:10.1007/s10924-015-0720-0 · Cited by 27 · cited 1×
“Among other things, they are biocompatible and resorbable and their degradation products are metabolized during the Krebs cycle [6,7].”
BackgroundSelf-citationHuang, H., Wang, B., Chen, X., Pan, L., & Li, Y. (2019) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.29350 · Cited by 27
Poly(Lactic Acid): Flow-Induced Crystallization
Rhoades, A. M., & Pantani, R. (2019) · Advances in polymer science · doi:10.1007/12_2019_49 · Cited by 22
Izzo, L., & Pappalardo, D. (2010) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201000347 · Cited by 20 · cited 1×
“Additionally, the details of the macromolecular structure, such as the molecular weight and dispersity, kind of end-groups [22], the polymer microstructure and architecture are important factors [23].”
BackgroundSelf-citationPolyethylene-like macrolactone-based polyesters: Rheological, thermal and barrier properties
Sorrentino, A., Gorrasi, G., Bugatti, V., Fuoco, T., & Pappalardo, D. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2018.10.001 · Cited by 18 · cited 1×
“, glycolide, lactide and caprolactone [30,31], but also oflarge ring macrolactone [32,33] and ofnovel synthetized thiol-functionalized lactide [34,35].”
BackgroundSelf-citationGorrasi, G., Vertuccio, L., Annunziata, L., Pellecchia, C., & Pappalardo, D. (2010) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2009.11.006 · Cited by 15 · cited 1×
“Additionally, the details of the macromolecular structure, such as the molecular weight and dispersity, kind of end-groups [22], the polymer microstructure and architecture are important factors [23].”
BackgroundSelf-citationSynthesis of Ultrahigh Molecular Weight PLAs Using a Phenoxy-Imine Al(III) Complex
Li, F., Rastogi, S., & Romano, D. (2020) · ACS Omega · doi:10.1021/acsomega.0c01952 · Cited by 14 · cited 1×
“Unfortunately, the brittle nature of isotactic PLA limits its application [11].”
BackgroundFuoco, T., Meduri, A., Lamberti, M., Pellecchia, C., & Pappalardo, D. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42567 · Cited by 11 · cited 1×
“, glycolide, lactide and caprolactone [30,31], but also oflarge ring macrolactone [32,33] and ofnovel synthetized thiol-functionalized lactide [34,35].”
BackgroundSelf-citation
Research works printed but not linked: 1
- Allen, G., and Bevington, J.C. (1989). Polymer Characterization. Comprehensive Polymer Science Supply, Elsevier.
Cited by
Recent Approaches to the Plasticization of Poly(lactic Acid) (PLA) (A Review)
Mastalygina, E. E., & Aleksanyan, K. V. (2023) · Polymers · doi:10.3390/polym16010087 · Cited by 110
“[25–27].”
A decade of innovation: Synthesis, properties and applications of PLA copolymers
Terzopoulou, Z. N., Zamboulis, A., Bikiaris, N. D., Xanthopoulou, E., Ioannidis, R. O., & Bikiaris, D. Ν. (2025) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2025.101991 · Cited by 68
PLA-Based Biodegradable Polymer from Synthesis to the Application
Wi, J., Choi, J., & Lee, S. Y. (2025) · Polymers · doi:10.3390/polym18010121 · Cited by 40
“Pappalardo et al. compared PLLA-b-PCL and PDLLA-b-PCL block copolymers with PLLA-ran-PCL random copolymers, confirming that adding PCL segments not only improves rheological properties and mechanical flexibility but also gives the material shape-memory properties [183].”
Jing, Z., Huang, X., Liu, X., Liao, M., Zhang, Z., & Li, Y. (2022) · RSC Advances · doi:10.1039/d2ra00461e · Cited by 23
Zhukova, P. A., Senatov, F. S., Zadorozhnyy, M. Y., Chmelyuk, N. S., & Zaharova, V. A. (2021) · Polymers · doi:10.3390/polym13142367 · Cited by 26
“T e incorp ration of bioactive ceramic particles into the comp sition [19] or the creation of block copolymers [36] can positively affect the amount f the rigid phase, imp ov ng the mechanical characteristics and the charac eristics of the SME.”
Background
Metadata
- Authors
- Naddeo, M., Sorrentino, A., & Pappalardo, D.
- Affiliations
- University of Sannio (IT)
- National Research Council (IT)
- Corresponding author
- Sorrentino, Andrea
- Pappalardo, Daniela
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-02-19
- Volume
- 13
- Issue
- 4
- Pages
- 627
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC7922056
- OpenAlex
- W3132813333
- Semantic Scholar
- 7a953da489931f9e9ede5d85a2f515717c21d7f0
- Cited by
- 25
- References
- 55
- Citations by year
- 2026: 4 · 2025: 7 · 2024: 2 · 2023: 3 · 2022: 6 · 2021: 3
- FWCI
- 0.91
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- lactide, ε-caprolactone, block copolymers, random copolymers, shape memory polymers, biodegradable polymers, cyclic ester polymerization, stereochemistry, monomer distribution, co-crystallization, rheological properties, thermal properties, mechanical properties
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-09, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-09 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.