The DOI matches its Crossref record; 118 of the 118 references it cites were found in a registry or an index.
3D Printed Sensors for Biomedical Applications: A Review
Open accessAbstract
This paper showcases a substantial review on some of the significant work done on 3D printing of sensors for biomedical applications. The importance of 3D printing techniques has bloomed in the sensing world due to their essential advantages of quick fabrication, easy accessibility, processing of varied materials and sustainability. Along with the introduction of the necessity and influence of 3D printing techniques for the fabrication of sensors for different healthcare applications, the paper explains the individual methodologies used to develop sensing prototypes. Six different 3D printing techniques have been explained in the manuscript, followed by drawing a comparison between them in terms of their advantages, disadvantages, materials being processed, resolution, repeatability, accuracy and applications. Finally, a conclusion of the paper is provided with some of the challenges of the current 3D printing techniques about the developed sensing prototypes, their corresponding remedial solutions and a market survey determining the expenditure on 3D printing for biomedical sensing prototypes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wireless sensor networks: a survey
Akyildiz, I. F., Su, W., Sankarasubramaniam, Y., & Cayirci, E. (2002) · Computer Networks · doi:10.1016/s1389-1286(01)00302-4 · Cited by 17,418
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Wireless sensor network survey
Yick, J., Mukherjee, B., & Ghosal, D. (2008) · Computer Networks · doi:10.1016/j.comnet.2008.04.002 · Cited by 6,255
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
3-D printing: The new industrial revolution
Berman, B. (2012) · Business Horizons · doi:10.1016/j.bushor.2011.11.003 · Cited by 2,481
A review of wearable sensors and systems with application in rehabilitation
Patel, S., Park, H., Bonato, P., Chan, L., & Rodgers, M. (2012) · Journal of NeuroEngineering and Rehabilitation · doi:10.1186/1743-0003-9-21 · Cited by 2,396
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Review of the present status of optical fiber sensors
Lee, B. (2003) · Optical Fiber Technology · doi:10.1016/s1068-5200(02)00527-8 · Cited by 1,736
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
A Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring
Lynch, J. P. (2006) · The Shock and Vibration Digest · doi:10.1177/0583102406061499 · Cited by 1,533
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
3D-printing techniques in a medical setting: a systematic literature review
Tack, P., Victor, J., Gemmel, P., & Annemans, L. (2016) · BioMedical Engineering OnLine · doi:10.1186/s12938-016-0236-4 · Cited by 1,098
3D printed microfluidic devices: enablers and barriers
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039 · cited 1×
“Hence, even though, the mass production of 3D printed products is not acceptable in manufacturing industries, it is mostly acceptable where rapid modifications are required in the sensor manufacturing industries [68].”
BackgroundMedical Applications for 3D Printing: Current and Projected Uses.
Ventola, C. L. (2014) · PubMed Central · Cited by 920
Review of 20 years of range sensor development
Blais, F. (2004) · Journal of Electronic Imaging · doi:10.1117/1.1631921 · Cited by 907
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 874
A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
Leigh, S. J., Bradley, R. J., Purssell, C. P., Billson, D. R., & Hutchins, D. A. (2012) · PLoS ONE · doi:10.1371/journal.pone.0049365 · Cited by 787
Graphene-based transparent strain sensor
Bae, S.-H., Lee, Y., Sharma, B. K., Lee, H.-J., Kim, J.-H., & Ahn, J.-H. (2013) · Carbon · doi:10.1016/j.carbon.2012.08.048 · Cited by 777
Flexible Graphene-Based Wearable Gas and Chemical Sensors
Singh, E., Meyyappan, M., & Nalwa, H. S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07063 · Cited by 776
Wireless Sensor Networks for Healthcare
Ko, J., Lu, C., Srivastava, M. B., Stankovic, J. A., Terzis, A., & Welsh, M. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2065210 · Cited by 733
Ge, Q., Dunn, C. K., Qi, H. J., & Dunn, M. L. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094007 · Cited by 726
Graph-based heuristics for recognition of machined features from a 3D solid model
Joshi, S., & Chang, T. C. (1988) · Computer-Aided Design · doi:10.1016/0010-4485(88)90050-4 · Cited by 724
A Review of 3D Printing Technology for Medical Applications
Yan, Q., Dong, H., Su, J., Han, J., Song, B., Wei, Q., & Shi, Y. (2018) · Engineering · doi:10.1016/j.eng.2018.07.021 · Cited by 720
The production of anatomical teaching resources using three‐dimensional (3D) printing technology
McMenamin, P. G., Quayle, M. R., McHenry, C. R., & Adams, J. W. (2014) · Anatomical Sciences Education · doi:10.1002/ase.1475 · Cited by 698
Advantages and disadvantages of 3-dimensional printing in surgery: A systematic review
Martelli, N., Serrano, C., van den Brink, H., Pineau, J., Prognon, P., Borget, I., & El Batti, S. (2016) · Surgery · doi:10.1016/j.surg.2015.12.017 · Cited by 681
Xu, L., Gutbrod, S. R., Bonifas, A. P., Su, Y., Sulkin, M. S., Lu, N., Chung, H.-J., Jang, K.-I., Liu, Z., Ying, M., et al. (2014) · Nature Communications · doi:10.1038/ncomms4329 · Cited by 634
Direct selective laser sintering of metals
Agarwala, M., Bourell, D., Beaman, J., Marcus, H., & Barlow, J. (1995) · Rapid Prototyping Journal · doi:10.1108/13552549510078113 · Cited by 571
Biocompatible Inkjet Printing Technique for Designed Seeding of Individual Living Cells
Nakamura, M., Kobayashi, A., Takagi, F., Watanabe, A., Hiruma, Y., Ohuchi, K., Iwasaki, Y., Horie, M., Morita, I., & Takatani, S. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1658 · Cited by 538
Wearable Flexible Sensors: A Review
Nag, A., Mukhopadhyay, S. C., & Kosel, J. (2017) · IEEE Sensors Journal · doi:10.1109/jsen.2017.2705700 · Cited by 526
Self-citationNovel Biomaterials Used in Medical 3D Printing Techniques
Tappa, K., & Jammalamadaka, U. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010017 · Cited by 490
4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate
Miao, S., Zhu, W., Castro, N. J., Nowicki, M., Zhou, X., Cui, H., Fisher, J. P., & Zhang, L. G. (2016) · Scientific Reports · doi:10.1038/srep27226 · Cited by 477
Low, Z.-X., Chua, Y. T., Ray, B. M., Mattia, D., Metcalfe, I. S., & Patterson, D. A. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.10.006 · Cited by 465
Abdulla, S., Mathew, T. L., & Pullithadathil, B. (2015) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2015.08.002 · Cited by 404
Selective laser sintering: A qualitative and objective approach
Kumar, S. (2003) · JOM · doi:10.1007/s11837-003-0175-y · Cited by 398
The Boom in 3D-Printed Sensor Technology
Xu, Y., Wu, X., Guo, X., Kong, B., Zhang, M., Qian, X., Mi, S., & Sun, W. (2017) · Sensors · doi:10.3390/s17051166 · Cited by 361
Self-citationMulti‐nozzle deposition for construction of 3D biopolymer tissue scaffolds
Khalil, S., Nam, J., & Sun, W. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573347 · Cited by 351
Slicing procedures in layered manufacturing: a review
Mohan Pandey, P., Venkata Reddy, N., & Dhande, S. G. (2003) · Rapid Prototyping Journal · doi:10.1108/13552540310502185 · Cited by 349
3D-printed microfluidic automation
Au, A. K., Bhattacharjee, N., Horowitz, L. F., Chang, T. C., & Folch, A. (2015) · Lab on a Chip · doi:10.1039/c5lc00126a · Cited by 311
Lee, W., Kwon, D., Choi, W., Jung, G. Y., Au, A. K., Folch, A., & Jeon, S. (2015) · Scientific Reports · doi:10.1038/srep07717 · Cited by 300
Liquid-Phase Gallium–Indium Alloy Electronics with Microcontact Printing
Tabatabai, A., Fassler, A., Usiak, C., & Majidi, C. (2013) · Langmuir · doi:10.1021/la401245d · Cited by 293
3D printed microfluidic devices with integrated versatile and reusable electrodes
Erkal, J. L., Selimovic, A., Gross, B. C., Lockwood, S. Y., Walton, E. L., McNamara, S., Martin, R. S., & Spence, D. M. (2014) · Lab Chip · doi:10.1039/c4lc00171k · Cited by 287
Gao, A., Lu, N., Dai, P., Li, T., Pei, H., Gao, X., Gong, Y., Wang, Y., & Fan, C. (2011) · Nano Letters · doi:10.1021/nl202303y · Cited by 285
Wang, Z., Kumar, H., Tian, Z., Jin, X., Holzman, J. F., Menard, F., & Kim, K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06607 · Cited by 270
Silicon nanowire biosensor and its applications in disease diagnostics: A review
Zhang, G.-J., & Ning, Y. (2012) · Analytica Chimica Acta · doi:10.1016/j.aca.2012.08.035 · Cited by 268
A 3D printed dry electrode for ECG/EEG recording
Salvo, P., Raedt, R., Carrette, E., Schaubroeck, D., Vanfleteren, J., & Cardon, L. (2012) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2011.12.017 · Cited by 264
Temperature sensor realized by inkjet printing process on flexible substrate
Dankoco, M. D., Tesfay, G. Y., Benevent, E., & Bendahan, M. (2016) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2015.11.003 · Cited by 246
Development of rapid tooling using fused deposition modeling: a review
Boparai, K. S., Singh, R., & Singh, H. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2014-0048 · Cited by 229
A 3D Printed Fluidic Device that Enables Integrated Features
Anderson, K. B., Lockwood, S. Y., Martin, R. S., & Spence, D. M. (2013) · Analytical Chemistry · doi:10.1021/ac4009594 · Cited by 229
3D Printing of Carbon Nanotubes-Based Microsupercapacitors
Yu, W., Zhou, H., Li, B. Q., & Ding, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13904 · Cited by 227
Applications of additive manufacturing in dentistry: A review
Bhargav, A., Sanjairaj, V., Rosa, V., Feng, L. W., & Fuh YH, J. (2018) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33961 · Cited by 223
Magnetic biosensor technologies for medical applications: a review
Llandro, J., Palfreyman, J. J., Ionescu, A., & Barnes, C. H. W. (2010) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-010-0649-3 · Cited by 222
Development Trends in Additive Manufacturing and 3D Printing
Lu, B., Li, D., & Tian, X. (2015) · Engineering · doi:10.15302/j-eng-2015012 · Cited by 221
Roda, A., Guardigli, M., Calabria, D., Calabretta, M. M., Cevenini, L., & Michelini, E. (2014) · The Analyst · doi:10.1039/c4an01612b · Cited by 205
A Review of 3D Printing Techniques and the Future in Biofabrication of Bioprinted Tissue
Patra, S., & Young, V. (2016) · Cell Biochemistry and Biophysics · doi:10.1007/s12013-016-0730-0 · Cited by 202
Woo, S.-J., Kong, J.-H., Kim, D.-G., & Kim, J.-M. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc00392f · Cited by 199
Bandyopadhyay, A., Bose, S., & Das, S. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.3 · Cited by 198
3D printed molds for non-planar PDMS microfluidic channels
Hwang, Y., Paydar, O. H., & Candler, R. N. (2015) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2015.02.028 · Cited by 187
Patterning conductive PDMS nanocomposite in an elastomer using microcontact printing
Liu, C.-X., & Choi, J.-W. (2009) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/19/8/085019 · Cited by 186
Design and fabrication of a hybrid silicon three-axial force sensor for biomechanical applications
Beccai, L., Roccella, S., Arena, A., Valvo, F., Valdastri, P., Menciassi, A., Carrozza, M. C., & Dario, P. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2005.01.007 · Cited by 183
A SiC MEMS Resonant Strain Sensor for Harsh Environment Applications
Azevedo, R. G., Jones, D. G., Jog, A. V., Jamshidi, B., Myers, D. R., Chen, L., Fu, X.-A., Mehregany, M., Wijesundara, M. B. J., & Pisano, A. P. (2007) · IEEE Sensors Journal · doi:10.1109/jsen.2007.891997 · Cited by 181
Connell, J. L., Kim, J., Shear, J. B., Bard, A. J., & Whiteley, M. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1421211111 · Cited by 179
Ionita, C. N., Mokin, M., Varble, N., Bednarek, D. R., Xiang, J., Snyder, K. V., Siddiqui, A. H., Levy, E. I., Meng, H., & Rudin, S. (2014) · SPIE Proceedings · doi:10.1117/12.2042266 · Cited by 176
3D-printed supercapacitor-powered electrochemiluminescent protein immunoarray
Kadimisetty, K., Mosa, I. M., Malla, S., Satterwhite-Warden, J. E., Kuhns, T. M., Faria, R. C., Lee, N. H., & Rusling, J. F. (2016) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2015.09.017 · Cited by 172
Yebo, N. A., Lommens, P., Hens, Z., & Baets, R. (2010) · Optics Express · doi:10.1364/oe.18.011859 · Cited by 172
3D printed modules for integrated microfluidic devices
Lee, K. G., Park, K. J., Seok, S., Shin, S., Kim, D. H., Park, J. Y., Heo, Y. S., Lee, S. J., & Lee, T. J. (2014) · RSC Adv. · doi:10.1039/c4ra05072j · Cited by 163
Wang, K., Ho, C., Zhang, C., & Wang, B. (2017) · Engineering · doi:10.1016/j.eng.2017.05.013 · Cited by 161
Pranzo, D., Larizza, P., Filippini, D., & Percoco, G. (2018) · Micromachines · doi:10.3390/mi9080374 · Cited by 160
A review of 3D-printed sensors
Ni, Y., Ji, R., Long, K., Bu, T., Chen, K., & Zhuang, S. (2017) · Applied Spectroscopy Reviews · doi:10.1080/05704928.2017.1287082 · Cited by 158
3D printed chip for electrochemical detection of influenza virus labeled with CdS quantum dots
Krejčová, L., Nejdl, L., Rodrigo, M. Á. M., et al. (2013) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2013.10.031 · Cited by 153
Ge, L., Dong, L., Wang, D., Ge, Q., & Gu, G. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.02.041 · Cited by 153
Flexible Graphene Electrodes for Prolonged Dynamic ECG Monitoring
Lou, C., Li, R., Li, Z., Liang, T., Wei, Z., Run, M., Yan, X., & Liu, X. (2016) · Sensors · doi:10.3390/s16111833 · Cited by 140
Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications
Laszczak, P., Jiang, L., Bader, D. L., et al. (2014) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2014.10.002 · Cited by 135
Chan, H. N., Shu, Y., Xiong, B., Chen, Y., Chen, Y., Tian, Q., Michael, S. A., Shen, B., & Wu, H. (2015) · ACS Sensors · doi:10.1021/acssensors.5b00100 · Cited by 129
Flexible carbon nanotube nanocomposite sensor for multiple physiological parameter monitoring
Nag, A., Mukhopadhyay, S. C., & Kosel, J. (2016) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2016.10.023 · Cited by 118
Self-citationUltrarapid Detection of Pathogenic Bacteria Using a 3D Immunomagnetic Flow Assay
Lee, W., Kwon, D., Chung, B., Jung, G. Y., Au, A. K., Folch, A., & Jeon, S. (2014) · Analytical Chemistry · doi:10.1021/ac501436d · Cited by 117
Yaqoob, U., Phan, D.-T., Uddin, A. S. M. I., et al. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.06.137 · Cited by 115
Sensing system for salinity testing using laser-induced graphene sensors
Nag, A., Mukhopadhyay, S. C., & Kosel, J. (2017) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2017.08.008 · Cited by 113
Self-citation3D-Printed Biosensor Arrays for Medical Diagnostics
Sharafeldin, M., Jones, A. L., & Rusling, J. F. (2018) · Micromachines · doi:10.3390/mi9080394 · Cited by 113
Strain induced graphite/PDMS sensors for biomedical applications
Nag, A., Afsarimanesh, N., Feng, S., & Mukhopadhyay, S. C. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.01.044 · Cited by 111
Self-citationFlexible polyimide-based force sensor
Dobrzynska, J., & Gijs, M. A. M. (2011) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2011.11.006 · Cited by 110
Smartphone-interfaced 3D printed toxicity biosensor integrating bioluminescent “sentinel cells”
Cevenini, L., Calabretta, M. M., Tarantino, G., Michelini, E., & Roda, A. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.11.017 · Cited by 110
Application of fusion deposition modelling for rapid investment casting - a review
Kumar, P., Ahuja, I. S., & Singh, R. (2012) · International Journal of Materials Engineering Innovation · doi:10.1504/ijmatei.2012.049254 · Cited by 103
Hierarchically self-morphing structure through 4D printing
Teoh, J. E. M., An, J., Chua, C. K., Lv, M. Y., Krishnasamy, V., & Liu, Y. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1272174 · Cited by 98
A Large Area Flexible Array Sensors Using Screen Printing Technology
Chang, W.-Y., Fang, T., Lin, H.-J., Shen, Y., & Lin, Y. (2009) · Journal of Display Technology · doi:10.1109/jdt.2008.2004862 · Cited by 97
Rapid fabrication of microfluidic PDMS devices from reusable PDMS molds using laser ablation
Işıksaçan, Z., Guler, M. T., Aydogdu, B., Bilican, İ., & Elbüken, Ç. (2016) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/26/3/035008 · Cited by 97
Valentin, T. M., Leggett, S. E., Chen, P., Sodhi, J., Stephens, L. H., McClintock, H. D., Sim, J. Y., & Wong, I. Y. (2017) · Lab on a Chip · doi:10.1039/c7lc00694b · Cited by 96
DNA biosensing with 3D printing technology
Loo, A. H., Chua, C. K., & Pumera, M. (2016) · The Analyst · doi:10.1039/c6an02038k · Cited by 94
Advances in Optical Sensing and Bioanalysis Enabled by 3D Printing
Lambert, A. S., Valiulis, S. N., & Cheng, Q. J. (2018) · ACS Sensors · doi:10.1021/acssensors.8b01085 · Cited by 88
Tang, C. K., Vaze, A., & Rusling, J. F. (2017) · Lab on a Chip · doi:10.1039/c6lc01238h · Cited by 87
Customizable 3D Printed ‘Plug and Play’ Millifluidic Devices for Programmable Fluidics
Tsuda, S., Jaffery, H., Doran, D., Hezwani, M., Robbins, P. J., Yoshida, M., & Cronin, L. (2015) · PLoS ONE · doi:10.1371/journal.pone.0141640 · Cited by 83
A portable low-cost long-term live-cell imaging platform for biomedical research and education
Walzik, M. P., Vollmar, V., Lachnit, T., Dietz, H., Haug, S., Bachmann, H., Fath, M., Aschenbrenner, D., Mofrad, S. A., Friedrich, O., et al. (2014) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2014.09.061 · Cited by 80
Chen, C., Wang, Y., Lockwood, S. Y., & Spence, D. M. (2014) · The Analyst · doi:10.1039/c3an02357e · Cited by 80
Tactile Sensing From Laser-Ablated Metallized PET Films
Nag, A., Mukhopadhyay, S. C., & Kosel, J. (2016) · IEEE Sensors Journal · doi:10.1109/jsen.2016.2617878 · Cited by 80
Self-citationPiezoelectric microphone via a digital light processing 3D printing process
Tiller, B. P., Reid, A., Zhu, B., Guerreiro, J., Domingo-Roca, R., Jackson, J. C., & Windmill, J. F. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107593 · Cited by 80
3D printed stretchable capacitive sensors for highly sensitive tactile and electrochemical sensing
Li, K., Wei, H., Liu, W., Meng, H., Zhang, J., & Yan, C. (2018) · Nanotechnology · doi:10.1088/1361-6528/aaafa5 · Cited by 77
Developing Microfluidic Sensing Devices Using 3D Printing
Rusling, J. F. (2018) · ACS Sensors · doi:10.1021/acssensors.8b00079 · Cited by 76
Takenaga, S., Schneider, B., Erbay, E., Biselli, M., Schnitzler, T., Schöning, M. J., & Wagner, T. (2015) · physica status solidi (a) · doi:10.1002/pssa.201532053 · Cited by 72
Jing, M., Han, C., Li, M., & Shen, X. (2014) · Nanoscale Research Letters · doi:10.1186/1556-276x-9-588 · Cited by 69
Autonomous Chemical Sensing Interface for Universal Cell Phone Readout
Cómina, G., Suska, A., & Filippini, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201503727 · Cited by 59
Plasmonic Sensing with 3D Printed Optics
Hinman, S. S., McKeating, K. S., & Cheng, Q. J. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.7b03967 · Cited by 57
Disposable electrochemical sensor prepared using 3D printing for cell and tissue diagnostics
Ragones, H., Schreiber, D. S., Inberg, A., Berkh, O., Kósa, G., Freeman, A., & Shacham‐Diamand, Y. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.04.065 · Cited by 55
Su, C., Yen, S.-C., Li, T.-W., & Sun, Y. (2016) · Analytical Chemistry · doi:10.1021/acs.analchem.6b00272 · Cited by 55
Carbon Nanotubes and Graphene as Additives in 3D Printing
Acquah, S. F. A., Leonhardt, B. E., Nowotarski, M. S., Magi, J. M., Chambliss, K. A., Venzel, T. E. S., Delekar, S. D., & Al-Hariri, L. A. (2016) · InTech eBooks · doi:10.5772/63419 · Cited by 53
Bendable piezoresistive sensors by screen printing MWCNT/PDMS composites on flexible substrates
Khan, S., Lorenzelli, L., & Dahiya, R. (2014) · Conference on Ph.D. Research in Microelectronics and Electronics · doi:10.1109/prime.2014.6872702 · Cited by 47
3D–4D Printed Objects: New Bioactive Material Opportunities
Mandon, C. A., Blum, L. J., & Marquette, C. A. (2017) · Micromachines · doi:10.3390/mi8040102 · Cited by 45
A potentiometric cobalt-based phosphate sensor based on screen-printing technology
Zhu, L., Zhou, X., & Shi, H. (2013) · Frontiers of Environmental Science & Engineering · doi:10.1007/s11783-013-0615-z · Cited by 44
Review of Rapid Prototyping-Technology for the Future
Mahindru, D. V., Mahendru, P., Srmgpc, Ganj, T., & Lucknow (2013) · Global Journal of Computer Science and Technology · Cited by 41
Silicon carbide coated MEMS strain sensor for harsh environment applications
Azevedo, R. G., Zhang, J., Jones, D. G., et al. (2007) · Proceedings, IEEE micro electro mechanical systems · doi:10.1109/memsys.2007.4433166 · Cited by 38
Ude, C., Hentrop, T., Lindner, P., Lücking, T. H., Scheper, T. H., & Beutel, S. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.07.017 · Cited by 36
Occupancy Detection at Smart Home Using Real-Time Dynamic Thresholding of Flexiforce Sensor
Nag, A., & Mukhopadhyay, S. C. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2015.2421348 · Cited by 35
Self-citationSingh, H., Shimojima, M., Shiratori, T., An, L. T., Sugamata, M., & Yang, M. (2015) · Sensors · doi:10.3390/s150716503 · Cited by 31
Dantism, S., Takenaga, S., Wagner, P., Wagner, T., & Schöning, M. J. (2016) · physica status solidi (a) · doi:10.1002/pssa.201533043 · Cited by 22
Printing of high concentration nanocomposites (MWNTs/PDMS) using 3D-printed shadow masks
Khan, S., Dang, W., Lorenzelli, L., & Dahiya, R. (2015) · AISEM Annual Conference · doi:10.1109/aisem.2015.7066786 · Cited by 13
Processing Issues and the Characterization of Soft Electrochemical 3D Sensor
Ragones, H., Schreiber, D. S., Inberg, A., Berkh, O., Kósa, G., & Shacham‐Diamand, Y. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.04.109 · Cited by 11
Cited by
Ahmad, A., Imran, M., & Ahsan, H. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15061630 · Cited by 386
3D printing technology; methods, biomedical applications, future opportunities and trends
Bozkurt, Y., & Karayel, E. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.050 · Cited by 384
3D-printed sensors: Current progress and future challenges
Khosravani, M. R., & Reinicke, T. (2020) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.111916 · Cited by 331
3D Printing of Multilayered and Multimaterial Electronics: A Review
Goh, G. L., Zhang, H., Chong, T. H., & Yeong, W. Y. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202100445 · Cited by 319
Progress and challenges in fabrication of wearable sensors for health monitoring
Nasiri, S., & Khosravani, M. R. (2020) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.112105 · Cited by 295
Metadata
- Authors
- Han, T., Kundu, S., Nag, A., & Xu, Y.
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2019-04-10
- Volume
- 19
- Issue
- 7
- Pages
- 1706
- ISSN
- 1424-8220 (ISSN-L)
- OpenAlex
- W2939978610
- Cited by
- 266
- References
- 118
- FWCI
- 14.99
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.