The DOI matches its Crossref record; 132 of the 132 references it cites were found in a registry or an index.
Rational Design of Nanostructured Functional Interlayer/Separator for Advanced Li–S Batteries
Abstract
The lithium–sulfur (Li–S) battery is considered as a promising future energy storage device owing to its high theoretical energy density, low cost of the raw active material (sulfur), and its environmental friendliness. On the other hand, there are still challenging issues for the practical applications of Li–S batteries, including low sulfur utilization, poor cyclability, and rate capability. Although considerable efforts are made to overcome the current obstacles in Li–S batteries, one is still far from meeting the requirements for the commercialization of Li–S batteries. This review outlines the recent progress in Li–S batteries based on novel configurations, such as incorporating functional interlayers/separators beyond the approach for preparing novel cathodes, and discusses the role of the configuration in Li–S batteries. The functions of the newly introduced functional interlayer/separator are highlighted to address the problems of Li–S batteries. From classification of the functions, the perspectives and outlook are presented to rationally design a novel functional interlayer/separator for high‐performance Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Design of electrocatalysts for oxygen- and hydrogen-involving energy conversion reactions
Jiao, Y., Zheng, Y., Jaroniec, M., & Qiao, S. Z. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00470a · Cited by 5,388
Universality in Oxygen Evolution Electrocatalysis on Oxide Surfaces
Man, I. C., Su, H., Calle‐Vallejo, F., Hansen, H. A., Martínez, J. I., Inoglu, N. G., Kitchin, J., Jaramillo, T. F., Nørskov, J. K., & Rossmeisl, J. (2011) · ChemCatChem · doi:10.1002/cctc.201000397 · Cited by 4,769
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
The development and future of lithium ion batteries
Blomgren, G. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0251701jes · Cited by 1,940
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
A review of conduction phenomena in Li-ion batteries
Park, M., Zhang, X., Chung, M., Less, G. B., & Sastry, A. M. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.060 · Cited by 1,627
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Tao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391
Metal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
The Birth of the Lithium‐Ion Battery
Yoshino, A. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201105006 · Cited by 1,229
Tiwari, J. N., Tiwari, R. N., & Kim, K. S. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.08.003 · Cited by 1,195
Understanding electrochemical potentials of cathode materials in rechargeable batteries
Liu, C., Neale, Z. G., & Cao, G. (2016) · Materials Today · doi:10.1016/j.mattod.2015.10.009 · Cited by 1,156
Lithium sulfur batteries, a mechanistic review
Wild, M., O'Neill, L., Zhang, T., Purkayastha, R., Minton, G., Marinescu, M., & Offer, G. J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01388g · Cited by 1,107
Zhou, T., Lv, W., Li, J., Zhou, G., Zhao, Y., Fan, S., Liu, B., Li, B., Kang, F., & Yang, Q.-H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01430a · Cited by 1,056
Mechanism and Kinetics of Li2S Precipitation in Lithium–Sulfur Batteries
Fan, F. Y., Carter, W. C., & Chiang, Y. (2015) · Advanced Materials · doi:10.1002/adma.201501559 · Cited by 987
Liu, D., Zhang, C., Zhou, G., Lv, W., Ling, G., Zhi, L., & Yang, Q. (2018) · Advanced Science · doi:10.1002/advs.201700270 · Cited by 956
Lin, H., Yang, L., Jiang, X., Li, G., Zhang, T., Yao, Q., Zheng, G. W., & Lee, J. Y. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01047h · Cited by 952
Barchasz, C., Molton, F., Duboc, C., Leprêtre, J.-C., Patoux, S., & Alloin, F. (2012) · Analytical Chemistry · doi:10.1021/ac2032244 · Cited by 946
MoS2/Celgard Separator as Efficient Polysulfide Barrier for Long‐Life Lithium–Sulfur Batteries
Ghazi, Z. A., He, X., Khattak, A. M., Khan, N. A., Liang, B., Iqbal, A., Wang, J., Sin, H., Li, L., & Tang, Z. (2017) · Advanced Materials · doi:10.1002/adma.201606817 · Cited by 902
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Liang, C., Dudney, N. J., & Howe, J. Y. (2009) · Chemistry of Materials · doi:10.1021/cm902050j · Cited by 862
High Lithium Electroactivity of Nanometer‐Sized Rutile TiO2
Hu, Y. ‐., Kienle, L., Guo, Y. ‐., & Maier, J. (2006) · Advanced Materials · doi:10.1002/adma.200502723 · Cited by 857
Lithium‐Ion Intercalation into TiO2‐B Nanowires
Armstrong, A. R., Armstrong, G., Canales, J., García, R., & Bruce, P. G. (2005) · Advanced Materials · doi:10.1002/adma.200400795 · Cited by 824
Huang, J.-Q., Zhuang, T.-Z., Zhang, Q., Peng, H.-J., Chen, C.-M., & Wei, F. (2015) · ACS Nano · doi:10.1021/nn507178a · Cited by 809
Hou, T.-Z., Chen, X., Peng, H.-J., Huang, J.-Q., Li, B.-Q., Zhang, Q., & Li, B. (2016) · Small · doi:10.1002/smll.201600809 · Cited by 789
Su, Y.-S., & Manthiram, A. (2012) · Chemical Communications · doi:10.1039/c2cc33945e · Cited by 755
Electrocatalytic Polysulfide Traps for Controlling Redox Shuttle Process of Li–S Batteries
Al Salem, H., Babu, G., V. Rao, C., & Arava, L. M. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04472 · Cited by 753
Tao, X., Wang, J., Ying, Z., Cai, Q., Zheng, G., Gan, Y., Huang, H., Xia, Y., Liang, C., Zhang, W., et al. (2014) · Nano Letters · doi:10.1021/nl502331f · Cited by 687
Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries
Huang, J.-Q., Zhang, Q., Peng, H.-J., Liu, X.-Y., Qian, W.-Z., & Wei, F. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42223b · Cited by 679
Huang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium–Sulfur Batteries
Peng, H., Zhang, G., Chen, X., Zhang, Z., Xu, W., Huang, J., & Zhang, Q. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605676 · Cited by 649
Hagen, M., Hanselmann, D., Ahlbrecht, K., Maça, R., Gerber, D., & Tübke, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401986 · Cited by 636
Li, N., Liu, G., Zhen, C., Li, F., Zhang, L., & Cheng, H. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002295 · Cited by 629
Lithium Bond Chemistry in Lithium–Sulfur Batteries
Hou, T., Xu, W., Chen, X., Peng, H., Huang, J., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201704324 · Cited by 574
A graphene foam electrode with high sulfur loading for flexible and high energy Li-S batteries
Zhou, G., Li, L., Ma, C., Wang, S., Shi, Y., Koratkar, N., Ren, W., Li, F., & Cheng, H.-M. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.025 · Cited by 570
Peng, H., Huang, J., Zhao, M., Zhang, Q., Cheng, X., Liu, X., Qian, W., & Wei, F. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303296 · Cited by 552
Sulfur Speciation in Li–S Batteries Determined by Operando X-ray Absorption Spectroscopy
Cuisinier, M., Cabelguen, P.-E., Evers, S., He, G., Kolbeck, M., Garsuch, A., Bolin, T., Balasubramanian, M., & Nazar, L. F. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz401763d · Cited by 550
Yao, H., Yan, K., Li, W., Zheng, G., Kong, D., Seh, Z. W., Narasimhan, V. K., Liang, Z., & Cui, Y. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01377h · Cited by 526
Chung, S., & Manthiram, A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400845 · Cited by 516
Structural Design of Cathodes for Li‐S Batteries
Pope, M. A., & Aksay, I. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500124 · Cited by 500
High “C” rate Li-S cathodes: sulfur imbibed bimodal porous carbons
He, G., Ji, X., & Nazar, L. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01219c · Cited by 475
Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 450
Stable cycling of lithium sulfide cathodes through strong affinity with a bifunctional binder
Seh, Z. W., Zhang, Q., Li, W., Zheng, G., Yao, H., & Cui, Y. (2013) · Chemical Science · doi:10.1039/c3sc51476e · Cited by 442
Kim, H., Lee, J., Ahn, H., Kim, O., & Park, M. J. (2015) · Nature Communications · doi:10.1038/ncomms8278 · Cited by 428
Al2O3-coated porous separator for enhanced electrochemical performance of lithium sulfur batteries
Zhang, Z., Lai, Y., Zhang, Z., Zhang, K., & Li, J. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.02.077 · Cited by 418
Advanced Separators for Lithium‐Ion and Lithium–Sulfur Batteries: A Review of Recent Progress
Xiang, Y., Li, J., Lei, J., Liu, D., Xie, Z., Qu, D., Li, K., Deng, T., & Tang, H. (2016) · ChemSusChem · doi:10.1002/cssc.201600943 · Cited by 404
Yao, H., Zheng, G., Hsu, P.-C., Kong, D., Cha, J. J., Li, W., Seh, Z. W., McDowell, M. T., Yan, K., Liang, Z., et al. (2014) · Nature Communications · doi:10.1038/ncomms4943 · Cited by 398
Yang, X., Zhang, L., Zhang, F., Huang, Y., & Chen, Y. (2014) · ACS Nano · doi:10.1021/nn501284q · Cited by 396
High-Performance Li–S Batteries with an Ultra-lightweight MWCNT-Coated Separator
Chung, S.-H., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5006913 · Cited by 393
Propelling polysulfides transformation for high-rate and long-life lithium–sulfur batteries
Zheng, C., Niu, S., Lv, W., Zhou, G., Li, J., Fan, S., Deng, Y., Pan, Z., Li, B., Kang, F., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.040 · Cited by 391
Kong, W., Yan, L., Luo, Y., Wang, D., Jiang, K., Li, Q., Fan, S., & Wang, J. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606663 · Cited by 376
Phosphorene as a Polysulfide Immobilizer and Catalyst in High‐Performance Lithium–Sulfur Batteries
Li, L., Chen, L., Mukherjee, S., Gao, J., Sun, H., Liu, Z., Ma, X., Gupta, T., Singh, C. V., Ren, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201602734 · Cited by 364
Tao, Y., Wei, Y., Liu, Y., Wang, J., Qiao, W., Ling, L., & Long, D. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01662f · Cited by 362
Park, J., Yu, B., Park, J. S., Choi, J. W., Kim, C., Sung, Y., & Goodenough, J. B. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602567 · Cited by 348
Exploiting a robust biopolymer network binder for an ultrahigh-areal-capacity Li–S battery
Liu, J., Galpaya, D. G. D., Yan, L., Sun, M., Lin, Z., Yan, C., Liang, C., & Zhang, S. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03033e · Cited by 347
A Graphene Foam Electrode with High Sulfur Loading for Flexible and High-Energy Li–S Batteries
Zhou, G. (2017) · Springer Theses · doi:10.1007/978-981-10-3406-0_6 · Cited by 344
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0171514jes · Cited by 323
Xu, N., Qian, T., Liu, X., Liu, J., Chen, Y., & Yan, C. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04610 · Cited by 319
Wang, H., Zhang, Q., Yao, H., Liang, Z., Lee, H.-W., Hsu, P.-C., Zheng, G., & Cui, Y. (2014) · Nano Letters · doi:10.1021/nl503730c · Cited by 312
Confined Sulfur in Microporous Carbon Renders Superior Cycling Stability in Li/S Batteries
Xu, Y., Wen, Y., Zhu, Y., Gaskell, K., Cychosz, K. A., Eichhorn, B., Xu, K., & Wang, C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500983 · Cited by 311
Zhang, S. S. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.002207jes · Cited by 297
Cathode materials for lithium–sulfur batteries: a practical perspective
Eftekhari, A., & Kim, D.-W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00799j · Cited by 285
Chung, S., Han, P., Singhal, R., Kalra, V., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500738 · Cited by 280
Reduced graphene oxide film as a shuttle-inhibiting interlayer in a lithium–sulfur battery
Wang, X., Wang, Z., & Chen, L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.063 · Cited by 274
A review on separators for lithium sulfur battery: Progress and prospects
Deng, N., Kang, W., Liu, Y., Ju, J., Wu, D., Li, L., Hassan, B. S., & Cheng, B. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.044 · Cited by 267
Porous graphene oxide/carbon nanotube hybrid films as interlayer for lithium-sulfur batteries
Huang, J.-Q., Xu, Z.-L., Abouali, S., Akbari Garakani, M., & Kim, J.-K. (2016) · Carbon · doi:10.1016/j.carbon.2015.12.081 · Cited by 266
Self-citationSynthesis and Li-Ion Insertion Properties of Highly Crystalline Mesoporous Rutile TiO2
Wang, D., Choi, D., Yang, Z., Viswanathan, V. V., Nie, Z., Wang, C., Song, Y., Zhang, J.-G., & Liu, J. (2008) · Chemistry of Materials · doi:10.1021/cm8002589 · Cited by 264
Probing the Lithium–Sulfur Redox Reactions: A Rotating-Ring Disk Electrode Study
Lu, Y.-C., He, Q., & Gasteiger, H. A. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500382s · Cited by 259
Zhu, J., Chen, C., Lu, Y., Zang, J., Jiang, M., Kim, D., & Zhang, X. (2016) · Carbon · doi:10.1016/j.carbon.2016.02.007 · Cited by 256
Yoo, J., Cho, S.-J., Jung, G. Y., Kim, S. H., Choi, K.-H., Kim, J.-H., Lee, C. K., Kwak, S. K., & Lee, S.-Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00870 · Cited by 255
Self-citationMechanistic modeling of polysulfide shuttle and capacity loss in lithium–sulfur batteries
Hofmann, A. F., Fronczek, D. N., & Bessler, W. G. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.082 · Cited by 248
Advanced High Energy Density Secondary Batteries with Multi‐Electron Reaction Materials
Chen, R., Luo, R., Huang, Y., Wu, F., & Li, L. (2016) · Advanced Science · doi:10.1002/advs.201600051 · Cited by 248
Eroglu, D., Zavadil, K. R., & Gallagher, K. G. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0611506jes · Cited by 224
Polysulfide-Scission Reagents for the Suppression of the Shuttle Effect in Lithium–Sulfur Batteries
Hua, W., Yang, Z., Nie, H., Li, Z., Yang, J., Guo, Z., Ruan, C., Chen, X., & Huang, S. (2017) · ACS Nano · doi:10.1021/acsnano.6b08627 · Cited by 224
Zhang, Z., Li, Z., Hao, F., Wang, X., Li, Q., Qi, Y., Fan, R., & Yin, L. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201303080 · Cited by 222
Zhu, J., Ge, Y., Kim, D., Lu, Y., Chen, C., Jiang, M., & Zhang, X. (2016) · Nano Energy · doi:10.1016/j.nanoen.2015.12.022 · Cited by 209
Babu, G., Ababtain, K., Ng, K. Y. S., & Arava, L. M. R. (2015) · Scientific Reports · doi:10.1038/srep08763 · Cited by 209
Zhao, Y., Liu, M., Lv, W., He, Y.-B., Wang, C., Yun, Q., Li, B., Kang, F., & Yang, Q.-H. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.09.030 · Cited by 197
Chang, C.-H., Chung, S.-H., & Manthiram, A. (2016) · Small · doi:10.1002/smll.201502505 · Cited by 194
Xing, L., Xi, K., Li, Q., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.10.097 · Cited by 193
Nanostructured cathode materials for lithium–sulfur batteries: progress, challenges and perspectives
Rehman, S., Khan, K., Zhao, Y., & Hou, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10111a · Cited by 189
Li, X., Ding, K., Gao, B., Li, Q., Li, Y., Fu, J., Zhang, X., Chu, P. K., & Huo, K. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.09.018 · Cited by 188
Polysulfide-Blocking Microporous Polymer Membrane Tailored for Hybrid Li-Sulfur Flow Batteries
Li, C., Ward, A. L., Doris, S. E., Pascal, T. A., Prendergast, D., & Helms, B. A. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02078 · Cited by 178
Phosphorene as a promising anchoring material for lithium–sulfur batteries: a computational study
Zhao, J., Yang, Y., Katiyar, R. S., & Chen, Z. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00871b · Cited by 177
Ma, G., Wen, Z., Wang, Q., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.141 · Cited by 172
Brückner, J., Thieme, S., Grossmann, H. T., Dörfler, S., Althues, H., & Kaskel, S. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.143 · Cited by 163
Shaibani, M., Akbari, A., Sheath, P., Easton, C. D., Banerjee, P. C., Konstas, K., Fakhfouri, A., Barghamadi, M., Musameh, M. M., Best, A. S., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b03285 · Cited by 163
Liang, J., Yin, L., Tang, X., Yang, H., Yan, W., Song, L., Cheng, H.-M., & Li, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05647 · Cited by 163
Balach, J., Singh, H. K., Gomoll, S., Jaumann, T., Klose, M., Oswald, S., Richter, M., Eckert, J., & Giebeler, L. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03642 · Cited by 161
An in-plane heterostructure of graphene and titanium carbide for efficient polysulfide confinement
Zhou, T., Zhao, Y., Zhou, G., Lv, W., Sun, P., Kang, F., Li, B., & Yang, Q.-H. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.07.012 · Cited by 161
Perspective—Commercializing Lithium Sulfur Batteries: Are We Doing the Right Research?
Cleaver, T., Kováčik, P., Marinescu, M., Zhang, T., & Offer, G. J. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0071801jes · Cited by 159
Lin, C., Zhang, W., Wang, L., Wang, Z., Zhao, W., Duan, W., Zhao, Z., Liu, B., & Jin, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta10307j · Cited by 158
Sulfonic Groups Originated Dual-Functional Interlayer for High Performance Lithium–Sulfur Battery
Lu, Y., Gu, S., Guo, J., Rui, K., Chen, C., Zhang, S., Jin, J. H., Yang, J., & Wen, Z. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02142 · Cited by 158
In Situ Observation and Electrochemical Study of Encapsulated Sulfur Nanoparticles by MoS2 Flakes
Tang, W., Chen, Z., Tian, B., Lee, H., Zhao, X., Fan, X., Fan, Y., Leng, K., Peng, C., Kim, M., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05371 · Cited by 154
Zhu, P., Zhu, J., Zang, J., Chen, C., Lu, Y., Jiang, M., Yan, C., Dirican, M., Selvan, R. K., & Zhang, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03301j · Cited by 153
Advanced Lithium–Sulfur Batteries Enabled by a Bio‐Inspired Polysulfide Adsorptive Brush
Zhao, T., Ye, Y., Peng, X., Divitini, G., Kim, H., Lao, C., Coxon, P. R., Xi, K., Liu, Y., Ducati, C., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201604069 · Cited by 146
Jeong, Y. C., Kim, J. H., Kwon, S. H., Oh, J. Y., Park, J., Jung, Y., Lee, S. G., Yang, S. J., & Park, C. R. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta08153g · Cited by 133
Self-citationZhang, L., Sun, D., Feng, J., Cairns, E. J., & Guo, J. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02381 · Cited by 122
Systematic Effect for an Ultralong Cycle Lithium–Sulfur Battery
Wu, F., Ye, Y., Chen, R., Qian, J., Zhao, T., Li, L., & Li, W. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02864 · Cited by 116
Kim, J. H., Seo, J., Choi, J., Shin, D., Carter, M., Jeon, Y., Wang, C., Hu, L., & Paik, U. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06190 · Cited by 111
Self-citationSafari, M., Kwok, C. Y., & Nazar, L. F. (2016) · ACS Central Science · doi:10.1021/acscentsci.6b00169 · Cited by 96
Zhu, J., Yıldırım, E., Aly, K., Shen, J., Chen, C., Lu, Y., Jiang, M., Kim, D. S., Tonelli, A. E., Pasquinelli, M. A., et al. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04577d · Cited by 94
Zuo, P., Hua, J., He, M., Zhang, H., Qian, Z., Ma, Y., Du, C., Cheng, X., Gao, Y., & Yin, G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02245j · Cited by 94
Bifunctional separator as a polysulfide mediator for highly stable Li–S batteries
Abbas, S. A., Ibrahem, M., Hu, L., Lin, C., Fang, J., Boopathi, K. M., Wang, P., Li, L., & Chu, C. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02272c · Cited by 93
Balach, J., Jaumann, T., Mühlenhoff, S., Eckert, J., & Giebeler, L. (2016) · Chemical Communications · doi:10.1039/c6cc03743g · Cited by 84
Su, Z., Tong, C., He, D., Lai, C., Liu, L., Wang, C., & Xi, K. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00706f · Cited by 77
Wu, F., Qian, J., Chen, R., Ye, Y., Sun, Z., Xing, Y., & Li, L. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06516c · Cited by 74
Wang, Q., Wen, Z., Yang, J., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.109 · Cited by 70
Stoeck, U., Balach, J., Klose, M., Wadewitz, D., Ahrens, E., Eckert, J., & Giebeler, L. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.077 · Cited by 69
Long-Life, High-Efficiency Lithium–Sulfur Battery from a Nanoassembled Cathode
Yan, J., Liu, X., Yao, M., Wang, X., Wafle, T. K., & Li, B. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01780 · Cited by 66
Wang, M., Zhang, H., Zhou, W., Yang, X., Li, X., & Zhang, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08999a · Cited by 63
Kim, T., Kang, J. H., Yang, S. J., Sung, S. J., Kim, Y. S., & Park, C. R. (2014) · Energy & Environmental Science · doi:10.1039/c4ee02310b · Cited by 62
Self-citationHierarchical TiO2 spheres as highly efficient polysulfide host for lithium-sulfur batteries
Yang, Z.-Z., Wang, H., Lu, L., Wang, C., Zhong, X., Jin-guo, W., & Jiang, Q. (2016) · Scientific Reports · doi:10.1038/srep22990 · Cited by 60
Li, G., Wang, C., Cai, W., Lin, Z., Li, Z. P., & Zhang, S. (2016) · NPG Asia Materials · doi:10.1038/am.2016.138 · Cited by 58
Zhou, X., Liao, Q., Bai, T., & Yang, J. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1029-2 · Cited by 55
Yuan, C., Zhu, S., Cao, H. Q., Hou, L., & Lin, J. (2015) · Nanotechnology · doi:10.1088/0957-4484/27/4/045403 · Cited by 51
Kaewruang, S., Chiochan, P., Phattharasupakun, N., Suktha, P., Kongpatpanich, K., Maihom, T., Limtrakul, J. P., & Sawangphruk, M. (2017) · Carbon · doi:10.1016/j.carbon.2017.07.096 · Cited by 50
Polysulfide rejection layer from alpha-lipoic acid for high performance lithium–sulfur battery
Song, J., Noh, H., Lee, H., Lee, J.-N., Lee, D. J., Lee, Y., Kim, C., Lee, Y. M., Park, J.-K., & Kim, H. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03625e · Cited by 45
Kim, J. H., Jung, G. Y., Lee, Y., Kim, J. H., Lee, S., Kwak, S. K., & Lee, S. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04830 · Cited by 44
Self-citationEffect of fibrous separators on the performance of lithium–sulfur batteries
Choudhury, S., Azizi, M., Raguzin, I., et al. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp00310b · Cited by 23
Cited by
Zhang, L., Liu, D., Muhammad, Z., Wan, F., Xie, W., Wang, Y., Song, L., Niu, Z., & Chen, J. (2019) · Advanced Materials · doi:10.1002/adma.201903955 · Cited by 713
Host Materials Anchoring Polysulfides in Li–S Batteries Reviewed
Zhou, L., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202001304 · Cited by 516
Rational design of two-dimensional nanomaterials for lithium–sulfur batteries
Jana, M., Xu, R., Cheng, X.-B., Yeon, J. S., Park, J. M., Huang, J.-Q., Zhang, Q., & Park, H. S. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02049g · Cited by 393
Li, S., Zhang, W., Zheng, J., Lv, M., Song, H., & Du, L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000779 · Cited by 373
Recent progress of separators in lithium-sulfur batteries
Li, C., Liu, R., Xiao, Y., Cao, F., & Zhang, H. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.05.034 · Cited by 343
Metadata
- Authors
- Jeong, Y. C., Kim, J. H., Nam, S., Park, C. R., & Yang, S. J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-02-26
- Volume
- 28
- Issue
- 38
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2794240680
- Cited by
- 429
- References
- 132
- FWCI
- 20.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.