The DOI matches its Crossref record; 137 of the 137 references it cites were found in a registry or an index.
Progress and Perspective of Solid‐State Lithium–Sulfur Batteries
Abstract
Due to high energy density, low cost, and nontoxicity, lithium–sulfur (Li–S) batteries are considered as the most promising candidate to satisfy the requirement from the accelerated development of electric vehicles. However, Li–S batteries are subjected to lithium polysulfides (LiPSs) shuttling due to their high dissolution in liquid electrolyte, resulting in low columbic efficiency and poor cycling performance. Moreover, the Li metal as an indispensable anode of Li–S batteries shows serious safety issues derived from the lithium dendrite formation. The replacement of liquid electrolytes with solid‐state electrolytes (SSEs) has been recognized as a fundamental approach to effectively address above problems. In this review, the progress on applying various classes of SSEs including gel, solid‐state polymer, ceramic, and composite electrolytes to solve the issues of Li–S batteries is summarized. The specific capacity of Li–S batteries is effectively improved due to the suppression of LiPSs shuttling by SSEs, while the rate and cycling performance remain relatively poor owing to the limited ionic conductivity and high interfacial resistance. Designing smart electrode/electrolyte integrated architectures, enabling the high ionic transportation pathway and compatible electrode/electrolyte interface, may be an effective way to achieve high performance solid‐state Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
High-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
The Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces
Monroe, C., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850854 · Cited by 1,701
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes
Li, N., Yin, Y., Yang, C., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504526 · Cited by 1,577
Atomic structure of sensitive battery materials and interfaces revealed by cryo–electron microscopy
Li, Y., Li, Y., Pei, A., Yan, K., Sun, Y., Wu, C.-L., Joubert, L.-M., Chin, R., Koh, A. L., Yu, Y., et al. (2017) · Science · doi:10.1126/science.aam6014 · Cited by 1,547
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
Review on gel polymer electrolytes for lithium batteries
Manuel Stephan, A. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.09.017 · Cited by 1,422
Electrochemical aspects of the generation of ramified metallic electrodeposits
Chazalviel, J.-N. (1990) · Physical Review A · doi:10.1103/physreva.42.7355 · Cited by 1,402
Tao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391
Metal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Zhang, R., Chen, X., Chen, X., Cheng, X., Zhang, X., Yan, C., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702099 · Cited by 1,225
Sun, Z., Zhang, J., Yin, L., Hu, G., Fang, R., Cheng, H.-M., & Li, F. (2017) · Nature Communications · doi:10.1038/ncomms14627 · Cited by 1,135
Enhancing ionic conductivity in composite polymer electrolytes with well-aligned ceramic nanowires
Liu, W., Lee, S. W., Lin, D., Shi, F., Wang, S., Sendek, A. D., & Cui, Y. (2017) · Nature Energy · doi:10.1038/nenergy.2017.35 · Cited by 1,103
Zhou, T., Lv, W., Li, J., Zhou, G., Zhao, Y., Fan, S., Liu, B., Li, B., Kang, F., & Yang, Q.-H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01430a · Cited by 1,056
Self-citationZhang, X., Liu, T., Zhang, S., Huang, X., Xu, B., Lin, Y., Xu, B., Li, L., Nan, C.-W., & Shen, Y. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06364 · Cited by 1,017
Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte
Zhou, W., Wang, S., Li, Y., Xin, S., Manthiram, A., & Goodenough, J. B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05341 · Cited by 1,006
Ionic Conductivity Enhancement of Polymer Electrolytes with Ceramic Nanowire Fillers
Liu, W., Liu, N., Sun, J., Hsu, P.-C., Li, Y., Lee, H.-W., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00600 · Cited by 1,001
A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries
Zhou, G., Pei, S., Li, L., Wang, D., Wang, S., Huang, K., Yin, L., Li, F., & Cheng, H. (2014) · Advanced Materials · doi:10.1002/adma.201302877 · Cited by 997
Liu, D., Zhang, C., Zhou, G., Lv, W., Ling, G., Zhi, L., & Yang, Q. (2018) · Advanced Science · doi:10.1002/advs.201700270 · Cited by 956
Self-citationDendritic growth mechanisms in lithium/polymer cells
Brissot, C., Rosso, M., Chazalviel, J.-N., & Lascaud, S. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00242-0 · Cited by 945
Fu, K. (., Gong, Y., Dai, J., Gong, A., Han, X., Yao, Y., Wang, C., Wang, Y., Chen, Y., Yan, C., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1600422113 · Cited by 930
Self-citationKhurana, R., Schaefer, J. L., Archer, L. A., & Coates, G. W. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502133j · Cited by 880
Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes
Yun, Q., He, Y., Lv, W., Zhao, Y., Li, B., Kang, F., & Yang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201601409 · Cited by 870
Self-citationAn anion-immobilized composite electrolyte for dendrite-free lithium metal anodes
Zhao, C.-Z., Zhang, X.-Q., Cheng, X.-B., Zhang, R., Xu, R., Chen, P.-Y., Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1708489114 · Cited by 849
Fu, K. (., Gong, Y., Liu, B., Zhu, Y., Xu, S., Yao, Y., Luo, W., Wang, C., Lacey, S. D., Dai, J., et al. (2017) · Science Advances · doi:10.1126/sciadv.1601659 · Cited by 842
Dendrite Growth in Lithium/Polymer Systems
Monroe, C., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1606686 · Cited by 800
Chen, R., Qu, W., Guo, X., Li, L., & Wu, F. (2016) · Materials Horizons · doi:10.1039/c6mh00218h · Cited by 797
Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes
Lu, D., Shao, Y., Lozano, T., Bennett, W. D., Graff, G. L., Polzin, B., Zhang, J., Engelhard, M. H., Saenz, N. T., Henderson, W. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400993 · Cited by 740
Lu, Q., He, Y., Yu, Q., Li, B., Kaneti, Y. V., Yao, Y., Kang, F., & Yang, Q. (2017) · Advanced Materials · doi:10.1002/adma.201604460 · Cited by 727
Self-citationZheng, J., Tian, J., Wu, D., Gu, M., Xu, W., Wang, C., Gao, F., Engelhard, M. H., Zhang, J.-G., Liu, J., et al. (2014) · Nano Letters · doi:10.1021/nl404721h · Cited by 719
Wang, C., Gong, Y., Liu, B., Fu, K., Yao, Y., Hitz, E., Li, Y., Dai, J., Xu, S., Luo, W., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04695 · Cited by 682
Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode
Yang, C., Yao, Y., He, S., Xie, H., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201702714 · Cited by 661
Luo, W., Gong, Y., Zhu, Y., Li, Y., Yao, Y., Zhang, Y., Fu, K. (., Pastel, G., Lin, C., Mo, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606042 · Cited by 651
Liang, Q., Li, Z., Yu, X., Huang, Z., Kang, F., & Yang, Q. (2015) · Advanced Materials · doi:10.1002/adma.201502057 · Cited by 646
Self-citationHagen, M., Hanselmann, D., Ahlbrecht, K., Maça, R., Gerber, D., & Tübke, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401986 · Cited by 636
Recent Advances in Electrolytes for Lithium–Sulfur Batteries
Zhang, S., Ueno, K., Dokko, K., & Watanabe, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500117 · Cited by 616
Carbon materials for Li–S batteries: Functional evolution and performance improvement
Liang, J., Sun, Z.-H., Li, F., & Cheng, H.-M. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.007 · Cited by 593
Dendrite short-circuit and fuse effect on Li/polymer/Li cells
Rosso, M., Brissot, C., Teyssot, A., Dollé, M., Sannier, L., Tarascon, J.-M., Bouchet, R., & Lascaud, S. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.02.004 · Cited by 589
Tang, C., Zhang, Q., Zhao, M., Huang, J., Cheng, X., Tian, G., Peng, H., & Wei, F. (2014) · Advanced Materials · doi:10.1002/adma.201401243 · Cited by 586
A Cooperative Interface for Highly Efficient Lithium–Sulfur Batteries
Peng, H., Zhang, Z., Huang, J., Zhang, G., Xie, J., Xu, W., Shi, J., Chen, X., Cheng, X., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201603401 · Cited by 583
Graphitized Carbon Fibers as Multifunctional 3D Current Collectors for High Areal Capacity Li Anodes
Zuo, T., Wu, X., Yang, C., Yin, Y., Ye, H., Li, N., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700389 · Cited by 579
Self-citationImplantable Solid Electrolyte Interphase in Lithium-Metal Batteries
Cheng, X.-B., Yan, C., Chen, X., Guan, C., Huang, J.-Q., Peng, H.-J., Zhang, R., Yang, S.-T., & Zhang, Q. (2017) · Chem · doi:10.1016/j.chempr.2017.01.003 · Cited by 524
He, J., Luo, L., Chen, Y., & Manthiram, A. (2017) · Advanced Materials · doi:10.1002/adma.201702707 · Cited by 521
Chung, S., & Manthiram, A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400845 · Cited by 516
Entrapment of Polysulfides by a Black‐Phosphorus‐Modified Separator for Lithium–Sulfur Batteries
Sun, J., Sun, Y., Pasta, M., Zhou, G., Li, Y., Liu, W., Xiong, F., & Cui, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602172 · Cited by 516
Improved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyte
Liang, X. M., Wen, Z., Liu, Y., Wu, M., Jin, J. H., Zhang, H., & Wu, X. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.027 · Cited by 506
3D lithium metal embedded within lithiophilic porous matrix for stable lithium metal batteries
Jin, C., Sheng, O., Luo, J., Yuan, H., Fang, C., Zhang, W., Huang, H., Gan, Y., Xia, Y., Liang, C., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.015 · Cited by 501
Structural Design of Cathodes for Li‐S Batteries
Pope, M. A., & Aksay, I. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500124 · Cited by 500
Kushima, A., So, K. P., Su, C., Bai, P., Kuriyama, N., Maebashi, T., Fujiwara, Y., Bazant, M. Z., & Li, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2016.12.001 · Cited by 492
Stable Li Metal Anodes via Regulating Lithium Plating/Stripping in Vertically Aligned Microchannels
Wang, S., Yin, Y., Zuo, T., Dong, W., Li, J., Shi, J., Zhang, C., Li, N., Li, C., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201703729 · Cited by 484
Novel gel polymer electrolyte for high-performance lithium–sulfur batteries
Liu, M., Zhou, D., He, Y.-B., Fu, Y., Qin, X., Miao, C., Du, H., Li, B., Yang, Q.-H., Lin, Z., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.008 · Cited by 465
Self-citationZeng, X.-X., Yin, Y.-X., Li, N.-W., Du, W.-C., Guo, Y.-G., & Wan, L.-J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10088 · Cited by 459
Electrochemical performance of lithium/sulfur cells with three different polymer electrolytes
Marmorstein, D., Yu, T. H., Striebel, K. A., McLarnon, F. R., Hou, J., & Cairns, E. J. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00432-8 · Cited by 451
Ye, H., Xin, S., Yin, Y.-X., Li, J.-Y., Guo, Y.-G., & Wan, L.-J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01763 · Cited by 451
Self-citationStable cycling of lithium sulfide cathodes through strong affinity with a bifunctional binder
Seh, Z. W., Zhang, Q., Li, W., Zheng, G., Yao, H., & Cui, Y. (2013) · Chemical Science · doi:10.1039/c3sc51476e · Cited by 442
A High‐Performance Polymer Tin Sulfur Lithium Ion Battery
Hassoun, J., & Scrosati, B. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907324 · Cited by 433
Wang, C., Yang, Y., Liu, X., Zhong, H., Xu, H., Xu, Z., Shao, H., & Ding, F. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00336 · Cited by 419
Hassoun, J., & Scrosati, B. (2010) · Advanced Materials · doi:10.1002/adma.201002584 · Cited by 415
Wang, X., Zhang, M., Alvarado, J., Wang, S., Sina, M., Lu, B., Bouwer, J., Xu, W., Xiao, J., Zhang, J.-G., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b03606 · Cited by 409
Zhou, D., Liu, R., He, Y., Li, F., Liu, M., Li, B., Yang, Q., Cai, Q., & Kang, F. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502214 · Cited by 408
Self-citationProgress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
Onset of dendritic growth in lithium/polymer cells
Rosso, M., Gobron, T., Brissot, C., Chazalviel, J.-N., & Lascaud, S. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00734-0 · Cited by 404
Advanced Separators for Lithium‐Ion and Lithium–Sulfur Batteries: A Review of Recent Progress
Xiang, Y., Li, J., Lei, J., Liu, D., Xie, Z., Qu, D., Li, K., Deng, T., & Tang, H. (2016) · ChemSusChem · doi:10.1002/cssc.201600943 · Cited by 404
Nanodiamonds suppress the growth of lithium dendrites
Cheng, X.-B., Zhao, M.-Q., Chen, C., Pentecost, A., Maleski, K., Mathis, T., Zhang, X.-Q., Zhang, Q., Jiang, J., & Gogotsi, Y. (2017) · Nature Communications · doi:10.1038/s41467-017-00519-2 · Cited by 401
Improving battery safety by early detection of internal shorting with a bifunctional separator
Wu, H., Zhuo, D., Kong, D., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6193 · Cited by 400
Chen, W., Qian, T., Xiong, J., Xu, N., Liu, X., Liu, J., Zhou, J., Shen, X., Yang, T., Chen, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201605160 · Cited by 382
In situ study of dendritic growth inlithium/PEO-salt/lithium cells
Brissot, C., Rosso, M., Chazalviel, J.-N., Baudry, P., & Lascaud, S. (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(97)10055-x · Cited by 365
Cohen, Y. S., Cohen, Y., & Aurbach, D. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp002526b · Cited by 360
Shim, J., Kim, H. J., Kim, B. G., Kim, Y. S., Kim, D.-G., & Lee, J.-C. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01095h · Cited by 351
Park, J., Yu, B., Park, J. S., Choi, J. W., Kim, C., Sung, Y., & Goodenough, J. B. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602567 · Cited by 348
Exploiting a robust biopolymer network binder for an ultrahigh-areal-capacity Li–S battery
Liu, J., Galpaya, D. G. D., Yan, L., Sun, M., Lin, Z., Yan, C., Liang, C., & Zhang, S. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03033e · Cited by 347
Lithium–sulfur batteries—the solution is in the electrolyte, but is the electrolyte a solution?
Barghamadi, M., Best, A. S., Bhatt, A. I., Hollenkamp, A. F., Musameh, M., Rees, R. J., & Rüther, T. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee02192d · Cited by 324
Sulfur–carbon nano-composite as cathode for rechargeable lithium battery based on gel electrolyte
Wang, J. L., Yang, J., Xie, J. Y., Xu, N. X., & Li, Y. (2002) · Electrochemistry Communications · doi:10.1016/s1388-2481(02)00358-2 · Cited by 315
All-solid-state Li/S batteries with highly conductive glass–ceramic electrolytes
Hayashi, A., Ohtomo, T., Mizuno, F., Tadanaga, K., & Tatsumisago, M. (2003) · Electrochemistry Communications · doi:10.1016/s1388-2481(03)00167-x · Cited by 312
Nagao, M., Hayashi, A., Tatsumisago, M., Kanetsuku, T., Tsuda, T., & Kuwabata, S. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51059j · Cited by 299
Chang, H. J., Ilott, A. J., Trease, N. M., Mohammadi, M., Jerschow, A., & Grey, C. P. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b09385 · Cited by 285
Sulphur-polypyrrole composite positive electrode materials for rechargeable lithium batteries
Wang, J., Chen, J., Konstantinov, K., Zhao, L., Ng, S. H., Wang, G. X., Guo, Z. P., & Liu, H. K. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.12.046 · Cited by 284
Phase Stability and Transport Mechanisms in Antiperovskite Li3OCl and Li3OBr Superionic Conductors
Emly, A., Kioupakis, E., & der Ven, A. V. (2013) · Chemistry of Materials · doi:10.1021/cm4016222 · Cited by 283
Guo, J., Wen, Z., Wu, M., Jin, J., & Liu, Y. (2015) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.12.008 · Cited by 273
Li, N., Yin, Y., Li, J., Zhang, C., & Guo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600400 · Cited by 273
Liang, X., Wen, Z., Liu, Y., Zhang, H., Huang, L., & Jin, J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.12.052 · Cited by 257
Application of lithiated Nafion ionomer film as functional separator for lithium sulfur cells
Jin, Z., Xie, K., Hong, X., Hu, Z., & Liu, X. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.06.100 · Cited by 248
Advanced engineering of nanostructured carbons for lithium–sulfur batteries
Wang, J.-G., Xie, K., & Wei, B. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.05.006 · Cited by 247
Nanoporous Polymer‐Ceramic Composite Electrolytes for Lithium Metal Batteries
Tu, Z., Kambe, Y., Lu, Y., & Archer, L. A. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300654 · Cited by 243
Polymer electrolytes—the early days
Wright, P. V. (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(97)10011-1 · Cited by 236
Liu, M., Li, Q., Qin, X., Liang, G., Han, W., Zhou, D., He, Y., Li, B., & Kang, F. (2017) · Small · doi:10.1002/smll.201602539 · Cited by 233
Self-citationFarrington, G. C., & Briant, J. L. (1979) · Science · doi:10.1126/science.204.4400.1371 · Cited by 208
Xu, R.-C., Xia, X.-H., Wang, X.-L., Xia, Y., & Tu, J.-P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10142a · Cited by 207
Judez, X., Zhang, H., Li, C., González-Marcos, J. A., Zhou, Z., Armand, M., & Rodriguez-Martinez, L. M. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b00593 · Cited by 203
Zhao, Y., Liu, M., Lv, W., He, Y.-B., Wang, C., Yun, Q., Li, B., Kang, F., & Yang, Q.-H. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.09.030 · Cited by 197
Self-citationNanostructured cathode materials for lithium–sulfur batteries: progress, challenges and perspectives
Rehman, S., Khan, K., Zhao, Y., & Hou, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10111a · Cited by 189
Jeong, S. S., Lim, Y. T., Choi, Y. J., Cho, G. B., Kim, K. W., Ahn, H. J., & Cho, K. K. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.108 · Cited by 184
Cross-Linked Solid Polymer Electrolyte for All-Solid-State Rechargeable Lithium Batteries
Ben youcef, H., Garcia-Calvo, O., Lago, N., Devaraj, S., & Armand, M. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.10.122 · Cited by 181
Xu, R.-C., Xia, X.-H., Li, S.-H., Zhang, S.-Z., Wang, X.-L., & Tu, J.-P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01147d · Cited by 167
Jin, C., Zhang, W., Zhuang, Z., Wang, J., Huang, H., Gan, Y., Xia, Y., Liang, C., Zhang, J., & Tao, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta07620c · Cited by 165
Zhang, C., Lin, Y., & Liu, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01037c · Cited by 159
Sheng, O., Jin, C., Luo, J., Yuan, H., Fang, C., Huang, H., Gan, Y., Zhang, J., Xia, Y., Liang, C., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03699j · Cited by 151
Rechargeable lithium sulfide electrode for a polymer tin/sulfur lithium-ion battery
Hassoun, J., Sun, Y., & Scrosati, B. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.093 · Cited by 148
Discharge process of Li/PVdF/S cells at room temperature
Ryu, H.-S., Ahn, H., Kim, K.-W., et al. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.05.037 · Cited by 146
Future prospects of the lithium metal anode
Takehara, Z. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(96)02546-3 · Cited by 135
Polymer-Rich Composite Electrolytes for All-Solid-State Li–S Cells
Júdez, X., Zhang, H., Li, C., Eshetu, G. G., Zhang, Y., González-Marcos, J. A., Armand, M. B., & Rodrı́guez-Martı́nez, L. M. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b01321 · Cited by 135
Bio-inspired fabrication of carbon nanotiles for high performance cathode of Li–S batteries
Tao, X., Zhang, J., Xia, Y., Huang, H., Du, J., Xiao, H., Zhang, W., & Gan, Y. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta14113f · Cited by 108
Jeddi, K., Sarikhani, K., Qazvini, N. T., & Chen, P. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.147 · Cited by 96
Real-time observation of lithium fibers growth inside a nanoscale lithium-ion battery
Ghassemi, H., Au, M., Chen, N., Heiden, P. A., & Yassar, R. S. (2011) · Applied Physics Letters · doi:10.1063/1.3643035 · Cited by 83
A hybrid electrolyte for long-life semi-solid-state lithium sulfur batteries
Gu, S., Huang, X., Wang, Q., Jin, J. H., Wang, Q., Wen, Z., & Qian, R. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04017b · Cited by 64
A lithium-ion sulfur battery using a polymer, polysulfide-added membrane
Agostini, M., & Hassoun, J. (2015) · Scientific Reports · doi:10.1038/srep07591 · Cited by 58
Lee, J. H., Song, J., Lee, H., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00289 · Cited by 57
Mejía, A., Shanmukaraj, D., Guzmán, J., del Amo, J. M. L., García, N., Rojo, T., Armand, M. B., & Tiemblo, P. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.099 · Cited by 49
Li, W., Zheng, H., Chu, G., Luo, F., Zheng, J., Xiao, D., Li, X., Gu, L., Li, H., Wei, X., et al. (2014) · Faraday Discussions · doi:10.1039/c4fd00124a · Cited by 46
Jeddi, K., Zhao, Y. H., Zhang, Y., Konarov, A., & Chen, P. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.010308jes · Cited by 42
Application of Gel Polymer Electrolytes Based on Ionic Liquids in Lithium-Sulfur Batteries
Baloch, M., Vižintin, A., Chellappan, R. K., Moškon, J., Shanmukaraj, D., Dedryvère, R., Rojo, T., & Dominko, R. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1151610jes · Cited by 38
Cited by
Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries
Wu, F., Maier, J., & Yu, Y. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00863e · Cited by 2,229
Commercialization of Lithium Battery Technologies for Electric Vehicles
Zeng, X., Li, M., Abd El‐Hady, D., Alshitari, W., Al‐Bogami, A. S., Lu, J., & Amine, K. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900161 · Cited by 1,542
Opportunities and Challenges for Organic Electrodes in Electrochemical Energy Storage
Poizot, P., Gaubicher, J., Renault, S., Dubois, L., Liang, Y., & Yao, Y. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00482 · Cited by 963
A Perspective toward Practical Lithium–Sulfur Batteries
Zhao, M., Li, B.-Q., Zhang, X.-Q., Huang, J.-Q., & Zhang, Q. (2020) · ACS Central Science · doi:10.1021/acscentsci.0c00449 · Cited by 858
Self-citationProgress and Perspective of Ceramic/Polymer Composite Solid Electrolytes for Lithium Batteries
Li, S., Zhang, S., Shen, L., Liu, Q., Ma, J., Lv, W., He, Y., & Yang, Q. (2020) · Advanced Science · doi:10.1002/advs.201903088 · Cited by 825
Self-citation
Metadata
- Authors
- Lei, D., Shi, K., Ye, H., Wan, Z., Wang, Y., Shen, L., Li, B., Yang, Q., Kang, F., & He, Y.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-03-15
- Volume
- 28
- Issue
- 38
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2793580736
- Cited by
- 282
- References
- 137
- FWCI
- 13.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.