The DOI matches its Crossref record; 147 of the 147 references it cites were found in a registry or an index.
Lithium–Sulfur Batteries: Progress and Prospects
Abstract
Development of advanced energy‐storage systems for portable devices, electric vehicles, and grid storage must fulfill several requirements: low‐cost, long life, acceptable safety, high energy, high power, and environmental benignity. With these requirements, lithium–sulfur (Li–S) batteries promise great potential to be the next‐generation high‐energy system. However, the practicality of Li–S technology is hindered by technical obstacles, such as short shelf and cycle life and low sulfur content/loading, arising from the shuttling of polysulfide intermediates between the cathode and anode and the poor electronic conductivity of S and the discharge product Li 2 S. Much progress has been made during the past five years to circumvent these problems by employing sulfur–carbon or sulfur–polymer composite cathodes, novel cell configurations, and lithium‐metal anode stabilization. This Progress Report highlights recent developments with special attention toward innovation in sulfur‐encapsulation techniques, development of novel materials, and cell‐component design. The scientific understanding and engineering concerns are discussed at the end in every developmental stage. The critical research directions needed and the remaining challenges to be addressed are summarized in the Conclusion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
State of Understanding of Nafion
Mauritz, K. A., & Moore, R. B. (2004) · Chemical Reviews · doi:10.1021/cr0207123 · Cited by 4,791
Chemically Derived, Ultrasmooth Graphene Nanoribbon Semiconductors
Li, X., Wang, X., Zhang, L., Lee, S., & Dai, H. (2008) · Science · doi:10.1126/science.1150878 · Cited by 4,790
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Self-citationLithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Self-citationWang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
Self-citationOn the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Gierke, T. D., Munn, G. E., & Wilson, F. C. (1981) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1981.180191103 · Cited by 1,434
New Approaches for High Energy Density Lithium–Sulfur Battery Cathodes
Evers, S., & Nazar, L. F. (2013) · Accounts of Chemical Research · doi:10.1021/ar3001348 · Cited by 1,324
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Zhang, B., Qin, X., Li, G. R., & Gao, X. P. (2010) · Energy & Environmental Science · doi:10.1039/c002639e · Cited by 1,280
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Materials Challenges and Opportunities of Lithium Ion Batteries
Manthiram, A. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1015422 · Cited by 1,065
Self-citationThe rechargeable revolution: a better battery
Van Noorden, R. (2014) · Nature · doi:10.1038/507026a · Cited by 1,047
Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M. H., Saraf, L. V., Nie, Z., Exarhos, G. J., & Liu, J. (2012) · Advanced Materials · doi:10.1002/adma.201103392 · Cited by 1,016
Metallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries
Zhou, G., Pei, S., Li, L., Wang, D., Wang, S., Huang, K., Yin, L., Li, F., & Cheng, H. (2014) · Advanced Materials · doi:10.1002/adma.201302877 · Cited by 997
Meyer, B. (1976) · Chemical Reviews · doi:10.1021/cr60301a003 · Cited by 996
Song, J., Xu, T., Gordin, M. L., Zhu, P., Lv, D., Jiang, Y., Chen, Y., Duan, Y., & Wang, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302631 · Cited by 978
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Barchasz, C., Molton, F., Duboc, C., Leprêtre, J.-C., Patoux, S., & Alloin, F. (2012) · Analytical Chemistry · doi:10.1021/ac2032244 · Cited by 946
Thermodynamic analysis on energy densities of batteries
Zu, C.-X., & Li, H. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00777c · Cited by 911
Self-citationElazari, R., Salitra, G., Garsuch, A., Panchenko, A., & Aurbach, D. (2011) · Advanced Materials · doi:10.1002/adma.201103274 · Cited by 895
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Liang, C., Dudney, N. J., & Howe, J. Y. (2009) · Chemistry of Materials · doi:10.1021/cm902050j · Cited by 862
A Novel Conductive Polymer-Sulfur Composite Cathode Material for Rechargeable Lithium Batteries
Wang, J., Yang, J., Xie, J., & Xu, N. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020704)14:13/14<963::aid-adma963>3.0.co;2-s · Cited by 818
Carbon–sulfur composites for Li–S batteries: status and prospects
Wang, D.-W., Zeng, Q., Zhou, G., Yin, L., Li, F., Cheng, H.-M., Gentle, I. R., & Lu, G. Q. M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11045a · Cited by 816
Confining Sulfur in Double‐Shelled Hollow Carbon Spheres for Lithium–Sulfur Batteries
Zhang, C., Wu, H. B., Yuan, C., Guo, Z., & Lou, X. W. (. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201205292 · Cited by 800
Su, Y.-S., & Manthiram, A. (2012) · Chemical Communications · doi:10.1039/c2cc33945e · Cited by 755
Self-citationYang, Y., Zheng, G., Misra, S., Nelson, J., Toney, M. F., & Cui, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3052206 · Cited by 718
Tao, X., Wang, J., Ying, Z., Cai, Q., Zheng, G., Gan, Y., Huang, H., Xia, Y., Liang, C., Zhang, W., et al. (2014) · Nano Letters · doi:10.1021/nl502331f · Cited by 687
Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries
Huang, J.-Q., Zhang, Q., Peng, H.-J., Liu, X.-Y., Qian, W.-Z., & Wei, F. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42223b · Cited by 679
Li, Z., Zhang, L., Amirkhiz, B. S., Tan, X., Xu, Z., Wang, H., Olsen, B. C., Holt, C. M. B., & Mitlin, D. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100548 · Cited by 649
Porous carbon nanofiber–sulfur composite electrodes for lithium/sulfur cells
Ji, L., Rao, M., Aloni, S., Wang, L., Cairns, E. J., & Zhang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02256c · Cited by 602
A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte
Rauh, R. D., Abraham, K. M., Pearson, G. F., Surprenant, J. K., & Brummer, S. B. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2129079 · Cited by 592
A Flexible Sulfur‐Graphene‐Polypropylene Separator Integrated Electrode for Advanced Li–S Batteries
Zhou, G., Li, L., Wang, D., Shan, X., Pei, S., Li, F., & Cheng, H. (2015) · Advanced Materials · doi:10.1002/adma.201404210 · Cited by 590
Tang, C., Zhang, Q., Zhao, M., Huang, J., Cheng, X., Tian, G., Peng, H., & Wei, F. (2014) · Advanced Materials · doi:10.1002/adma.201401243 · Cited by 586
A graphene foam electrode with high sulfur loading for flexible and high energy Li-S batteries
Zhou, G., Li, L., Ma, C., Wang, S., Shi, Y., Koratkar, N., Ren, W., Li, F., & Cheng, H.-M. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.025 · Cited by 570
Rechargeable Lithium Sulfur Battery
Cheon, S.-E., Ko, K.-S., Cho, J.-H., Kim, S.-W., Chin, E.-Y., & Kim, H.-T. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1571532 · Cited by 553
Peng, H., Huang, J., Zhao, M., Zhang, Q., Cheng, X., Liu, X., Qian, W., & Wei, F. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303296 · Cited by 552
Li, G., Li, G., Ye, S., & Gao, X. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200017 · Cited by 528
Lithium/sulfur batteries with high specific energy: old challenges and new opportunities
Song, M.-K., Cairns, E. J., & Zhang, Y. (2013) · Nanoscale · doi:10.1039/c2nr33044j · Cited by 522
Zhou, G., Wang, D.-W., Li, F., Hou, P.-X., Yin, L., Liu, C., Lu, G. Q. (., Gentle, I. R., & Cheng, H.-M. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22294a · Cited by 518
Chung, S., & Manthiram, A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400845 · Cited by 516
Self-citationRecent progress and remaining challenges in sulfur-based lithium secondary batteries – a review
Bresser, D., Passerini, S., & Scrosati, B. (2013) · Chemical Communications · doi:10.1039/c3cc46131a · Cited by 514
Bruce, P. G., & Vincent, C. A. (1993) · Journal of the Chemical Society Faraday Transactions · doi:10.1039/ft9938903187 · Cited by 480
The Lithium/Sulfur Rechargeable Cell
Shim, J., Striebel, K. A., & Cairns, E. J. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1503076 · Cited by 478
Optimization of mesoporous carbon structures for lithium–sulfur battery applications
Li, X., Cao, Y., Qi, W., Saraf, L. V., Xiao, J., Nie, Z., Mietek, J., Zhang, J.-G., Schwenzer, B., & Liu, J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12979a · Cited by 454
Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 450
Evers, S., & Nazar, L. F. (2011) · Chemical Communications · doi:10.1039/c2cc16726c · Cited by 441
Hydroxylated Graphene–Sulfur Nanocomposites for High‐Rate Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201201080 · Cited by 435
Self-citationA High‐Performance Polymer Tin Sulfur Lithium Ion Battery
Hassoun, J., & Scrosati, B. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907324 · Cited by 433
Recent advances in lithium–sulfur batteries
Chen, L., & Shaw, L. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.111 · Cited by 432
Rechargeable Lithium Sulfur Battery
Cheon, S.-E., Ko, K.-S., Cho, J.-H., Kim, S.-W., Chin, E.-Y., & Kim, H.-T. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1571533 · Cited by 424
Al2O3-coated porous separator for enhanced electrochemical performance of lithium sulfur batteries
Zhang, Z., Lai, Y., Zhang, Z., Zhang, K., & Li, J. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.02.077 · Cited by 418
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.041 · Cited by 414
Zhao, Y., Wu, W., Li, J., Xu, Z., & Guan, L. (2014) · Advanced Materials · doi:10.1002/adma.201401191 · Cited by 404
Cheng, X.-B., Huang, J.-Q., Zhang, Q., Peng, H.-J., Zhao, M.-Q., & Wei, F. (2014) · Nano Energy · doi:10.1016/j.nanoen.2013.12.013 · Cited by 403
New insights into the limiting parameters of the Li/S rechargeable cell
Barchasz, C., Leprêtre, J., Alloin, F., & Patoux, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.021 · Cited by 398
Yang, X., Zhang, L., Zhang, F., Huang, Y., & Chen, Y. (2014) · ACS Nano · doi:10.1021/nn501284q · Cited by 396
Peng, H., Hou, T., Zhang, Q., Huang, J., Cheng, X., Guo, M., Yuan, Z., He, L., & Wei, F. (2014) · Advanced Materials Interfaces · doi:10.1002/admi.201400227 · Cited by 393
High-Performance Li–S Batteries with an Ultra-lightweight MWCNT-Coated Separator
Chung, S.-H., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5006913 · Cited by 393
Self-citationA membrane-free lithium/polysulfide semi-liquid battery for large-scale energy storage
Yang, Y., Zheng, G., & Cui, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee00072a · Cited by 390
A lithium anode protection guided highly-stable lithium–sulfur battery
Ma, G., Wen, Z., Wu, M., Shen, C., Wang, Q., Jin, J., & Wu, X. (2014) · Chem. Commun. · doi:10.1039/c4cc05535g · Cited by 382
Carbonized Eggshell Membrane as a Natural Polysulfide Reservoir for Highly Reversible Li‐S Batteries
Chung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201304365 · Cited by 375
Self-citationYuan, L., Yuan, H., Qiu, X., Chen, L., & Zhu, W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.149 · Cited by 369
Chung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201402893 · Cited by 364
Self-citationSandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries
Cao, Y., Li, X., Aksay, I. A., Lemmon, J., Nie, Z., Yang, Z., & Liu, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02477e · Cited by 356
Encapsulated Monoclinic Sulfur for Stable Cycling of Li–S Rechargeable Batteries
Moon, S., Jung, Y. H., Jung, W. K., Jung, D. S., Choi, J. W., & Kim, D. K. (2013) · Advanced Materials · doi:10.1002/adma.201303166 · Cited by 354
Wei, S., Zhang, H., Huang, Y., Wang, W., Xia, Y., & Yu, Z. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00505c · Cited by 350
A Graphene Foam Electrode with High Sulfur Loading for Flexible and High-Energy Li–S Batteries
Zhou, G. (2017) · Springer Theses · doi:10.1007/978-981-10-3406-0_6 · Cited by 344
Lithium–Sulfur Battery Cathode Enabled by Lithium–Nitrile Interaction
Guo, J., Yang, Z., Yu, Y., Abruña, H. D., & Archer, L. A. (2013) · Journal of the American Chemical Society · doi:10.1021/ja309435f · Cited by 343
Highly Reversible Lithium/Dissolved Polysulfide Batteries with Carbon Nanotube Electrodes
Fu, Y., Su, Y., & Manthiram, A. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201301250 · Cited by 334
Self-citationHigh Efficiency Immobilization of Sulfur on Nitrogen-Enriched Mesoporous Carbons for Li–S Batteries
Sun, F., Wang, J., Chen, H., Li, W., Qiao, W., Long, D., & Ling, L. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400958x · Cited by 330
An Advanced Lithium‐Sulfur Battery
Kim, J., Lee, D. J., Jung, H., Sun, Y., Hassoun, J., & Scrosati, B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200689 · Cited by 329
Sulfur–carbon nano-composite as cathode for rechargeable lithium battery based on gel electrolyte
Wang, J. L., Yang, J., Xie, J. Y., Xu, N. X., & Li, Y. (2002) · Electrochemistry Communications · doi:10.1016/s1388-2481(02)00358-2 · Cited by 315
Lee, J. T., Zhao, Y., Thieme, S., Kim, H., Oschatz, M., Borchardt, L., Magasinski, A., Cho, W., Kaskel, S., & Yushin, G. (2013) · Advanced Materials · doi:10.1002/adma.201301579 · Cited by 315
Dörfler, S., Hagen, M., Althues, H., Tübke, J., Kaskel, S., & Hoffmann, M. J. (2012) · Chemical Communications · doi:10.1039/c2cc17925c · Cited by 299
High performance lithium–sulfur batteries: advances and challenges
Xu, G., Ding, B., Pan, J., Nie, P., Shen, L., & Zhang, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02097a · Cited by 297
Rodriguez, J. A., & Hrbek, J. (1999) · Accounts of Chemical Research · doi:10.1021/ar9801191 · Cited by 291
A new direction for the performance improvement of rechargeable lithium/sulfur batteries
Zhang, S. S., & Read, J. A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.076 · Cited by 289
Fu, Y., & Manthiram, A. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp300950m · Cited by 278
Self-citationReduced graphene oxide film as a shuttle-inhibiting interlayer in a lithium–sulfur battery
Wang, X., Wang, Z., & Chen, L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.063 · Cited by 274
Lin, T., Tang, Y., Wang, Y., Bi, H., Liu, Z., Huang, F., Xie, X., & Jiang, M. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24324a · Cited by 270
Zhou, G., Zhao, Y., Zu, C., & Manthiram, A. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.12.029 · Cited by 267
Self-citationWang, J., Yao, Z., Monroe, C. W., Yang, J., & Nuli, Y. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201847 · Cited by 266
Wang, C., Su, K., Wan, W., Guo, H., Zhou, H., Chen, J., Zhang, X., & Huang, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14921h · Cited by 263
Core-shell structured sulfur-polypyrrole composite cathodes for lithium-sulfur batteries
Fu, Y., & Manthiram, A. (2012) · RSC Advances · doi:10.1039/c2ra20393f · Cited by 253
Self-citationApplication of lithiated Nafion ionomer film as functional separator for lithium sulfur cells
Jin, Z., Xie, K., Hong, X., Hu, Z., & Liu, X. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.06.100 · Cited by 248
Improved lithium–sulfur cells with a treated carbon paper interlayer
Zu, C., Su, Y.-S., Fu, Y., & Manthiram, A. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp43394j · Cited by 245
Self-citationWeng, W., Pol, V. G., & Amine, K. (2013) · Advanced Materials · doi:10.1002/adma.201204051 · Cited by 241
Xu, T., Song, J., Gordin, M. L., Sohn, H., Yu, Z., Chen, S., & Wang, D. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4035784 · Cited by 238
Han, S.-C., Song, M.-S., Lee, H., Kim, H.-S., Ahn, H.-J., & Lee, J.-Y. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1576766 · Cited by 232
In Situ Formed Lithium Sulfide/Microporous Carbon Cathodes for Lithium-Ion Batteries
Zheng, S., Chen, Y., Xu, Y., Yi, F., Zhu, Y., Liu, Y., Yang, J., & Wang, C. (2013) · ACS Nano · doi:10.1021/nn404601h · Cited by 230
Enhanced Cyclability for Sulfur Cathode Achieved by a Water-Soluble Binder
He, M., Yuan, L.-X., Zhang, W.-X., Hu, X.-L., & Huang, Y.-H. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp2043416 · Cited by 226
Zhang, Z., Li, Z., Hao, F., Wang, X., Li, Q., Qi, Y., Fan, R., & Yin, L. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201303080 · Cited by 222
Copper‐Stabilized Sulfur‐Microporous Carbon Cathodes for Li–S Batteries
Zheng, S., Yi, F., Li, Z., Zhu, Y., Xu, Y., Luo, C., Yang, J., & Wang, C. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304156 · Cited by 217
Corrosion of Lithium‐Ion Battery Current Collectors
Braithwaite, J. W., Gonzales, A., Nagasubramanian, G., Lucero, S. J., Peebles, D. E., Ohlhausen, J. A., & Cieslak, W. R. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391627 · Cited by 212
Zheng, W., Liu, Y. W., Hu, X. G., & Zhang, C. F. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.06.021 · Cited by 205
Ye, H., Yin, Y.-X., Xin, S., & Guo, Y.-G. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10735c · Cited by 201
Su, Y., & Manthiram, A. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.06.002 · Cited by 193
Self-citationApplication of gelatin as a binder for the sulfur cathode in lithium–sulfur batteries
Sun, J., Huang, Y., Wang, W., Yu, Z., Wang, A., & Yuan, K. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.05.022 · Cited by 188
Role of Polysulfides in Self‐Healing Lithium–Sulfur Batteries
Xu, R., Belharouak, I., Li, J. C. M., Zhang, X., Bloom, I., & Bareño, J. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200990 · Cited by 184
Self-weaving sulfur–carbon composite cathodes for high rate lithium–sulfur batteries
Su, Y.-S., Fu, Y., & Manthiram, A. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp42796f · Cited by 184
Self-citationGraphene for advanced Li/S and Li/air batteries
Kim, H., Lim, H.-D., Kim, J., & Kang, K. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta12522j · Cited by 174
Ma, G., Wen, Z., Wang, Q., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.141 · Cited by 172
Ji, X., Liu, D.-Y., Prendiville, D. G., Zhang, Y., Liu, X., & Stucky, G. D. (2012) · Nano Today · doi:10.1016/j.nantod.2011.11.002 · Cited by 169
New approaches to improve cycle life characteristics of lithium–sulfur cells
JUNG, Y., & KIM, S. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.09.013 · Cited by 165
Stabilized Lithium–Metal Surface in a Polysulfide-Rich Environment of Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501352e · Cited by 164
Self-citationThieme, S., Brückner, J., Bauer, I., Oschatz, M., Borchardt, L., Althues, H., & Kaskel, S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10641a · Cited by 156
In Situ-Formed Li2S in Lithiated Graphite Electrodes for Lithium–Sulfur Batteries
Fu, Y., Zu, C., & Manthiram, A. (2013) · Journal of the American Chemical Society · doi:10.1021/ja409705u · Cited by 155
Self-citationHybrid and Aqueous Lithium‐Air Batteries
Manthiram, A., & Li, L. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201401302 · Cited by 153
Self-citationHuang, J., Zhang, Q., Zhang, S., et al. (2013) · Carbon · doi:10.1016/j.carbon.2013.02.037 · Cited by 148
Improvement of cycle property of sulfur electrode for lithium/sulfur battery
Choi, Y., Kim, K.-W., Ahn, H., & Ahn, J. (2007) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2006.02.098 · Cited by 141
Advanced hybrid Li–air batteries with high-performance mesoporous nanocatalysts
Li, L., Chai, S., Dai, S., & Manthiram, A. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00814f · Cited by 139
Self-citationEnhanced cycle performance of Li–S battery with a polypyrrole functional interlayer
Ma, G., Wen, Z., Jin, J. H., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.057 · Cited by 139
Chung, S., & Manthiram, A. (2014) · ChemSusChem · doi:10.1002/cssc.201301287 · Cited by 137
Self-citationPolymer lithium cells with sulfur composites as cathode materials
Wang, J., Liu, L., Ling, Z., et al. (2003) · Electrochimica Acta · doi:10.1016/s0013-4686(03)00258-5 · Cited by 136
Rao, M., Song, X., & Cairns, E. J. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.047 · Cited by 134
Preparation and performance of a core–shell carbon/sulfur material for lithium/sulfur battery
Wang, C., Chen, J., Shi, Y., et al. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.06.019 · Cited by 128
Schneider, H., Garsuch, A., Panchenko, A. A., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.12.061 · Cited by 123
Cheon, S.-E., Cho, J., Ko, K.-S., et al. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1511187 · Cited by 123
Hagen, M., Dörfler, S., Althues, H., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.04.004 · Cited by 119
Why PEO as a binder or polymer coating increases capacity in the Li–S system
Lacey, M. J., Jeschull, F., Edström, K., et al. (2013) · Chemical Communications · doi:10.1039/c3cc44772c · Cited by 112
Zhu, P., Song, J., Lv, D., Wang, D., Jaye, C., Fischer, D. A., Wu, T., & Chen, Y. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp4123634 · Cited by 108
Bio-inspired fabrication of carbon nanotiles for high performance cathode of Li–S batteries
Tao, X., Zhang, J., Xia, Y., Huang, H., Du, J., Xiao, H., Zhang, W., & Gan, Y. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta14113f · Cited by 108
Activated Li2S as a High-Performance Cathode for Rechargeable Lithium–Sulfur Batteries
Zu, C., Klein, M. J., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5021108 · Cited by 104
Self-citationQin, F., Zhang, K., Fang, J., et al. (2014) · New Journal of Chemistry · doi:10.1039/c4nj00701h · Cited by 87
A dual coaxial nanocable sulfur composite for high-rate lithium–sulfur batteries
Li, Z., Yuan, L., Yi, Z., et al. (2013) · Nanoscale · doi:10.1039/c3nr04347a · Cited by 82
Zhang, S., Zhang, Q., Huang, J., Liu, X., Zhu, W., Zhao, M., Qian, W., & Wei, F. (2013) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.201200082 · Cited by 74
Yao, M., Okuno, K., Iwaki, T., Awazu, T., & Sakai, T. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.10.014 · Cited by 64
Chung, S., & Manthiram, A. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500452j · Cited by 58
Self-citationCapacity fading in lithium/sulfur batteries: A linear four-state model
Risse, S., Angioletti‐Uberti, S., Dzubiella, J., & Ballauff, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.076 · Cited by 57
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Metadata
- Authors
- Manthiram, A., Chung, S., & Zu, C.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2015-02-17
- Volume
- 27
- Issue
- 12
- Pages
- 1980-2006
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2115659326
- Cited by
- 1,620
- References
- 147
- FWCI
- 85.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.