The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Abstract
Lithium-sulfur (Li-S) battery system is endowed with tremendous energy density, resulting from the complex sulfur electrochemistry involving multielectron redox reactions and phase transformations. Originated from the slow redox kinetics of polysulfide intermediates, the flood of polysulfides in the batteries during cycling induced low sulfur utilization, severe polarization, low energy efficiency, deteriorated polysulfide shuttle, and short cycling life. Herein, sulfiphilic cobalt disulfide (CoS2) was incorporated into carbon/sulfur cathodes, introducing strong interaction between lithium polysulfides and CoS2 under working conditions. The interfaces between CoS2 and electrolyte served as strong adsorption and activation sites for polar polysulfides and therefore accelerated redox reactions of polysulfides. The high polysulfide reactivity not only guaranteed effective polarization mitigation and promoted energy efficiency by 10% but also promised high discharge capacity and stable cycling performance during 2000 cycles. A slow capacity decay rate of 0.034%/cycle at 2.0 C and a high initial capacity of 1368 mAh g(-1) at 0.5 C were achieved. Since the propelling redox reaction is not limited to Li-S system, we foresee the reported strategy herein can be applied in other high-power devices through the systems with controllable redox reactions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Self-citationDesigning high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Self-citationAdvances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Self-citationReview on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Self-citationNanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Self-citationDu, Z., Chen, X., Hu, W., Chuang, C., Xie, S., Hu, A., Yan, W., Kong, X., Wu, X., Ji, H., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b12973 · Cited by 1,490
Catalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Self-citationLiu, D., Zhang, C., Zhou, G., Lv, W., Ling, G., Zhi, L., & Yang, Q. (2018) · Advanced Science · doi:10.1002/advs.201700270 · Cited by 956
Lin, H., Yang, L., Jiang, X., Li, G., Zhang, T., Yao, Q., Zheng, G. W., & Lee, J. Y. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01047h · Cited by 952
Electrode Degradation in Lithium-Ion Batteries
Pender, J. P., Jha, G., Youn, D. H., Ziegler, J. M., Andoni, I., Choi, E. J., Heller, A., Dunn, B. S., Weiss, P. S., Penner, R. M., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b04365 · Cited by 873
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Self-citationGraphene aerogels for efficient energy storage and conversion
Mao, J., Iocozzia, J., Huang, J., Meng, K., Lai, Y., & Lin, Z. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03031b · Cited by 868
Self-citationA Perspective toward Practical Lithium–Sulfur Batteries
Zhao, M., Li, B.-Q., Zhang, X.-Q., Huang, J.-Q., & Zhang, Q. (2020) · ACS Central Science · doi:10.1021/acscentsci.0c00449 · Cited by 858
Self-citationRevisiting the Role of Polysulfides in Lithium–Sulfur Batteries
Li, G., Wang, S., Zhang, Y., Li, M., Chen, Z., & Lu, J. (2018) · Advanced Materials · doi:10.1002/adma.201705590 · Cited by 711
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
Self-citationA sulfur host based on titanium monoxide@carbon hollow spheres for advanced lithium–sulfur batteries
Li, Z., Zhang, J., Guan, B., Wang, D., Liu, L.-M., & Lou, X. W. (2016) · Nature Communications · doi:10.1038/ncomms13065 · Cited by 677
Self-citationLithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Self-citationLi, Z., Wu, H. B., & (David) Lou, X. W. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02364a · Cited by 654
Beyond lithium ion batteries: Higher energy density battery systems based on lithium metal anodes
Shen, X., Liu, H., Cheng, X.-B., Yan, C., & Huang, J.-Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.002 · Cited by 653
Self-citationEnhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium–Sulfur Batteries
Peng, H., Zhang, G., Chen, X., Zhang, Z., Xu, W., Huang, J., & Zhang, Q. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605676 · Cited by 649
Self-citationYuan, H., Peng, H., Li, B., Xie, J., Kong, L., Zhao, M., Chen, X., Huang, J., & Zhang, Q. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802768 · Cited by 626
Self-citationCurrent Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Mesoporous Titanium Nitride‐Enabled Highly Stable Lithium‐Sulfur Batteries
Cui, Z., Zu, C., Zhou, W., Manthiram, A., & Goodenough, J. B. (2016) · Advanced Materials · doi:10.1002/adma.201601382 · Cited by 611
Zhou, G., Zhao, S., Wang, T., Yang, S.-Z., Johannessen, B., Chen, H., Liu, C., Ye, Y., Wu, Y., Peng, Y., et al. (2020) · Nano Letters · doi:10.1021/acs.nanolett.9b04719 · Cited by 605
Self-citationMultifunctional Transition Metal‐Based Phosphides in Energy‐Related Electrocatalysis
Li, Y., Dong, Z., & Jiao, L. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902104 · Cited by 603
Xue, W., Shi, Z., Suo, L., Wang, C., Wang, Z., Wang, H., So, K. P., Maurano, A., Yu, D., Chen, Y., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0351-0 · Cited by 591
He, J., Hartmann, G., Lee, M., Hwang, G. S., Chen, Y., & Manthiram, A. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03252a · Cited by 589
A Cooperative Interface for Highly Efficient Lithium–Sulfur Batteries
Peng, H., Zhang, Z., Huang, J., Zhang, G., Xie, J., Xu, W., Shi, J., Chen, X., Cheng, X., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201603401 · Cited by 583
Self-citationLithium Bond Chemistry in Lithium–Sulfur Batteries
Hou, T., Xu, W., Chen, X., Peng, H., Huang, J., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201704324 · Cited by 574
Self-citationEstablishing reaction networks in the 16-electron sulfur reduction reaction
Liu, R., Wei, Z., Peng, L., Zhang, L., Zohar, A., Schoeppner, R., Wang, P., Wan, C., Zhu, D., Liu, H., et al. (2024) · Nature · doi:10.1038/s41586-023-06918-4 · Cited by 573
He, J., Chen, Y., & Manthiram, A. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00893k · Cited by 565
Deciphering the Modulation Essence of p Bands in Co-Based Compounds on Li-S Chemistry
Zhou, J., Liu, X., Zhu, L., Zhou, J., Guan, Y., Chen, L., Niu, S., Cai, J., Sun, D., Zhu, Y., et al. (2018) · Joule · doi:10.1016/j.joule.2018.08.010 · Cited by 548
Song, Y., Zhao, W., Kong, L., Zhang, L., Zhu, X., Shao, Y., Ding, F., Zhang, Q., Sun, J., & Liu, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01402g · Cited by 539
Self-citationLim, W., Kim, S., Jo, C., & Lee, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201902413 · Cited by 535
Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices
Pang, J., Bachmatiuk, A., Yin, Y., Trzebicka, B., Zhao, L., Fu, L., Mendes, R. G., Gemming, T., Liu, Z., & Rummeli, M. H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702093 · Cited by 518
Nanostructured energy materials for electrochemical energy conversion and storage: A review
Zhang, X., Cheng, X., & Zhang, Q. (2016) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2016.11.003 · Cited by 516
Self-citationHost Materials Anchoring Polysulfides in Li–S Batteries Reviewed
Zhou, L., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202001304 · Cited by 516
Chen, T., Zhang, Z., Cheng, B., Chen, R., Hu, Y., Ma, L., Zhu, G., Liu, J., & Jin, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06973 · Cited by 502
A review on the status and challenges of electrocatalysts in lithium-sulfur batteries
He, J., & Manthiram, A. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.04.038 · Cited by 479
Progress on the Critical Parameters for Lithium–Sulfur Batteries to be Practically Viable
Chung, S., Chang, C., & Manthiram, A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801188 · Cited by 477
Huang, Y., Lin, L., Zhang, C., Liu, L., Li, Y., Qiao, Z., Lin, J., Wei, Q., Wang, L., Xie, Q., et al. (2022) · Advanced Science · doi:10.1002/advs.202106004 · Cited by 463
Surface Chemistry in Cobalt Phosphide-Stabilized Lithium–Sulfur Batteries
Zhong, Y., Yin, L., He, P., Liu, W., Wu, Z., & Wang, H. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b11434 · Cited by 458
Carbon nanomaterials for advanced lithium sulfur batteries
Xu, Z.-L., Kim, J.-K., & Kang, K. (2018) · Nano Today · doi:10.1016/j.nantod.2018.02.006 · Cited by 454
The Rechargeable Aluminum Battery: Opportunities and Challenges
Yang, H., Li, H., Li, J., Sun, Z., He, K., Cheng, H., & Li, F. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201814031 · Cited by 454
Emerging Catalysts to Promote Kinetics of Lithium–Sulfur Batteries
Wang, P., Xi, B., Huang, M., Chen, W., Feng, J., & Xiong, S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002893 · Cited by 451
Chen, X., Hou, T., Persson, K. A., & Zhang, Q. (2019) · Materials Today · doi:10.1016/j.mattod.2018.04.007 · Cited by 446
Self-citationA Review of Functional Binders in Lithium–Sulfur Batteries
Yuan, H., Huang, J., Peng, H., Titirici, M., Xiang, R., Chen, R., Liu, Q., & Zhang, Q. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802107 · Cited by 438
Self-citationRecent advances in shuttle effect inhibition for lithium sulfur batteries
Ren, W., Ma, W., Zhang, S., & Tang, B. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.022 · Cited by 434
Rational Design of Nanostructured Functional Interlayer/Separator for Advanced Li–S Batteries
Jeong, Y. C., Kim, J. H., Nam, S., Park, C. R., & Yang, S. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707411 · Cited by 429
A Comprehensive Understanding of Lithium–Sulfur Battery Technology
Li, T., Bai, X., Gulzar, U., Bai, Y., Capiglia, C., Deng, W., Zhou, X., Liu, Z., Feng, Z., & Proietti Zaccaria, R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901730 · Cited by 422
Advent of 2D Rhenium Disulfide (ReS2): Fundamentals to Applications
Rahman, M., Davey, K., & Qiao, S. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606129 · Cited by 416
Advances in Polar Materials for Lithium–Sulfur Batteries
Wang, H., Zhang, W., Xu, J., & Guo, Z. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707520 · Cited by 412
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0010-3 · Cited by 411
Ye, C., Zhang, L., Guo, C., Li, D., Vasileff, A., Wang, H., & Qiao, S. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702524 · Cited by 407
Li-S Batteries: Challenges, Achievements and Opportunities
Raza, H., Bai, S., Cheng, J., Majumder, S., Zhu, H., Liu, Q., Zheng, G., Li, X., & Chen, G. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00188-4 · Cited by 406
Ng, S., Lau, M. Y. L., & Ong, W. (2021) · Advanced Materials · doi:10.1002/adma.202008654 · Cited by 404
Strategies toward High‐Loading Lithium–Sulfur Battery
Hu, Y., Chen, W., Lei, T., Jiao, Y., Huang, J., Hu, A., Gong, C., Yan, C., Wang, X., & Xiong, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000082 · Cited by 402
Self-citationRational design of two-dimensional nanomaterials for lithium–sulfur batteries
Jana, M., Xu, R., Cheng, X.-B., Yeon, J. S., Park, J. M., Huang, J.-Q., Zhang, Q., & Park, H. S. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02049g · Cited by 393
Self-citationA review of recent developments in rechargeable lithium–sulfur batteries
Kang, W., Deng, N., Ju, J., Li, Q., Wu, D., Ma, X., Li, L., Naebe, M., & Cheng, B. (2016) · Nanoscale · doi:10.1039/c6nr04923k · Cited by 391
Propelling polysulfides transformation for high-rate and long-life lithium–sulfur batteries
Zheng, C., Niu, S., Lv, W., Zhou, G., Li, J., Fan, S., Deng, Y., Pan, Z., Li, B., Kang, F., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.040 · Cited by 391
Xu, Z.-L., Lin, S., Onofrio, N., Zhou, L., Shi, F., Lu, W., Kang, K., Zhang, Q., & Lau, S. P. (2018) · Nature Communications · doi:10.1038/s41467-018-06629-9 · Cited by 391
Self-citation2D MoN‐VN Heterostructure To Regulate Polysulfides for Highly Efficient Lithium‐Sulfur Batteries
Ye, C., Jiao, Y., Jin, H., Slattery, A. D., Davey, K., Wang, H., & Qiao, S. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201810579 · Cited by 385
Wang, D., Li, F., Lian, R., Xu, J., Kan, D., Liu, Y., Chen, G., Gogotsi, Y., & Wei, Y. (2019) · ACS Nano · doi:10.1021/acsnano.9b03412 · Cited by 385
Self-citationSun, X., Qiu, Y., Jiang, B., Chen, Z., Zhao, C., Zhou, H., Yang, L., Fan, L., Zhang, Y., & Zhang, N. (2023) · Nature Communications · doi:10.1038/s41467-022-35736-x · Cited by 378
Multifunctional Co3S4@sulfur nanotubes for enhanced lithium-sulfur battery performance
Pu, J., Shen, Z., Zheng, J., Wu, W., Zhu, C., Zhou, Q., Zhang, H., & Pan, F. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.009 · Cited by 369
Zhao, M., Peng, H., Zhang, Z., Li, B., Chen, X., Xie, J., Chen, X., Wei, J., Zhang, Q., & Huang, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201812062 · Cited by 364
Self-citationTao, Y., Wei, Y., Liu, Y., Wang, J., Qiao, W., Ling, L., & Long, D. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01662f · Cited by 362
Zhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
Self-citationDesigning Safe Electrolyte Systems for a High‐Stability Lithium–Sulfur Battery
Chen, W., Lei, T., Wu, C., Deng, M., Gong, C., Hu, K., Ma, Y., Dai, L., Lv, W., He, W., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702348 · Cited by 356
Polymers in Lithium‐Ion and Lithium Metal Batteries
Li, J., Cai, Y., Wu, H., Yu, Z., Yan, X., Zhang, Q., Gao, T. Z., Liu, K., Jia, X., & Bao, Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003239 · Cited by 348
Self-citationSulfur Reduction Reaction in Lithium–Sulfur Batteries: Mechanisms, Catalysts, and Characterization
Zhou, L., Danilov, D. L., Qiao, F., Wang, J., Li, H., Eichel, R., & Notten, P. H. L. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202202094 · Cited by 343
Chen, T., Ma, L., Cheng, B., Chen, R., Hu, Y., Zhu, G., Wang, Y., Liang, J., Tie, Z., Liu, J., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.064 · Cited by 334
Chen, X., Peng, H.-J., Zhang, R., Hou, T.-Z., Huang, J.-Q., Li, B., & Zhang, Q. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00164 · Cited by 325
Self-citationSingle-atom catalysis enables long-life, high-energy lithium-sulfur batteries
Zhuang, Z., Kang, Q., Wang, D., & Li, Y. (2020) · Nano Research · doi:10.1007/s12274-020-2827-4 · Cited by 322
Self-citationA Comprehensive Approach toward Stable Lithium–Sulfur Batteries with High Volumetric Energy Density
Pang, Q., Liang, X., Kwok, C. Y., Kulisch, J., & Nazar, L. F. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601630 · Cited by 321
Zhou, F., Li, Z., Luo, X., Wu, T., Jiang, B., Lu, L.-L., Yao, H.-B., Antonietti, M., & Yu, S.-H. (2018) · Nano Letters · doi:10.1021/acs.nanolett.7b04505 · Cited by 316
Wang, R., Yang, J., Chen, X., Zhao, Y., Zhao, W., Qian, G., Li, S., Xiao, Y., Chen, H., Ye, Y., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903550 · Cited by 315
Tang, C., Titirici, M.-M., & Zhang, Q. (2017) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2017.08.008 · Cited by 313
Self-citationZhang, J., Li, Z., Chen, Y., Gao, S., & Lou, X. W. (. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201805972 · Cited by 312
Wang, Y., Zhang, R., Pang, Y.-C., Chen, X., Lang, J., Xu, J., Xiao, C., Li, H., Xi, K., & Ding, S. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.05.019 · Cited by 312
Lei, J., Fan, X.-X., Liu, T., Xu, P., Hou, Q., Li, K., Yuan, R.-M., Zheng, M.-S., Dong, Q.-F., & Chen, J.-J. (2022) · Nature Communications · doi:10.1038/s41467-021-27866-5 · Cited by 308
Wang, Y., Chu, F., Zeng, J., Wang, Q., Naren, T., Li, Y., Cheng, Y., Lei, Y., & Wu, F. (2021) · ACS Nano · doi:10.1021/acsnano.0c08652 · Cited by 306
He, J., Chen, Y., Lv, W., Wen, K., Xu, C., Zhang, W., Li, Y., Qin, W., & He, W. (2016) · ACS Nano · doi:10.1021/acsnano.6b05696 · Cited by 305
Huang, S., Lim, Y. V., Zhang, X., Wang, Y., Zheng, Y., Kong, D., Ding, M., Yang, S. A., & Yang, H. Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.06.052 · Cited by 303
Rana, M., Ahad, S. A., Li, M., Luo, B., Wang, L., Gentle, I., & Knibbe, R. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.12.024 · Cited by 301
Song, J., Guo, X., Zhang, J., Chen, Y., Zhang, C., Luo, L., Wang, F., & Wang, G. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00212j · Cited by 301
Optimizing the p charge of S in p-block metal sulfides for sulfur reduction electrocatalysis
Hua, W., Shang, T., Li, H., Sun, Y., Guo, Y., Xia, J., Geng, C., Hu, Z., Peng, L., Han, Z., et al. (2023) · Nature Catalysis · doi:10.1038/s41929-023-00912-9 · Cited by 301
Xiao, Z., Li, Z., Li, P., Meng, X., & Wang, R. (2019) · ACS Nano · doi:10.1021/acsnano.9b00177 · Cited by 300
Yuan, H., Chen, X., Zhou, G., Zhang, W., Luo, J., Huang, H., Gan, Y., Liang, C., Xia, Y., Zhang, J., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00465 · Cited by 296
Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms
Yao, W., Liao, K., Lai, T., Sul, H., & Manthiram, A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00919 · Cited by 287
Cheng, Z., Xiao, Z., Pan, H., Wang, S., & Wang, R. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702337 · Cited by 285
Li, G., Lei, W., Luo, D., Deng, Y., Deng, Z., Wang, D., Yu, A., & Chen, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01377b · Cited by 283
Self-citationHou, L.-P., Zhang, X.-Q., Li, B.-Q., & Zhang, Q. (2021) · Materials Today · doi:10.1016/j.mattod.2020.10.021 · Cited by 283
Self-citationToward Practical High‐Energy‐Density Lithium–Sulfur Pouch Cells: A Review
Chen, Z., Zhao, M., Hou, L., Zhang, X., Li, B., & Huang, J. (2022) · Advanced Materials · doi:10.1002/adma.202201555 · Cited by 282
Self-citationRedox Comediation with Organopolysulfides in Working Lithium-Sulfur Batteries
Zhao, M., Li, B.-Q., Chen, X., Xie, J., Yuan, H., & Huang, J.-Q. (2020) · Chem · doi:10.1016/j.chempr.2020.09.015 · Cited by 280
Self-citation12 years roadmap of the sulfur cathode for lithium sulfur batteries (2009–2020)
Liu, T., Hu, H., Ding, X., Yuan, H., Jin, C., Nai, J., Liu, Y., Wang, Y., Wan, Y., & Tao, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.05.023 · Cited by 278
Designing a Quinone-Based Redox Mediator to Facilitate Li2S Oxidation in Li-S Batteries
Tsao, Y., Lee, M., Miller, E. C., Gao, G., Park, J., Chen, S., Katsumata, T., Tran, H., Wang, L.-W., Toney, M. F., et al. (2019) · Joule · doi:10.1016/j.joule.2018.12.018 · Cited by 277
Cyclic Voltammetry in Lithium–Sulfur Batteries—Challenges and Opportunities
Huang, X., Wang, Z., Knibbe, R., Luo, B., Ahad, S. A., Sun, D., & Wang, L. (2019) · Energy Technology · doi:10.1002/ente.201801001 · Cited by 269
Exploring and Understanding the Roles of Li2Sn and the Strategies to beyond Present Li-S Batteries
Lei, J., Liu, T., Chen, J., Zheng, M., Zhang, Q., Mao, B., & Dong, Q. (2020) · Chem · doi:10.1016/j.chempr.2020.06.032 · Cited by 268
Self-citation
Metadata
- Authors
- Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-01-04
- Volume
- 16
- Issue
- 1
- Pages
- 519-527
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2212183100
- Cited by
- 1,438
- References
- 57
- FWCI
- 60.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.