The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Electrospun Poly(ε-caprolactone) Microfiber and Multilayer Nanofiber/Microfiber Scaffolds: Characterization of Scaffolds and Measurement of Cellular Infiltration
Abstract
The physical and spatial architectural geometries of electrospun scaffolds are important to their application in tissue engineering strategies. In this work, poly(epsilon-caprolactone) microfiber scaffolds with average fiber diameters ranging from 2 to 10 microm were individually electrospun to determine the parameters required for reproducibly fabricating scaffolds. As fiber diameter increased, the average pore size of the scaffolds, as measured by mercury porosimetry, increased (values ranging from 20 to 45 microm), while a constant porosity was observed. To capitalize on both the larger pore sizes of the microfiber layers and the nanoscale dimensions of the nanofiber layers, layered scaffolds were fabricated by sequential electrospinning. These scaffolds consisted of alternating layers of poly(epsilon-caprolactone) microfibers and poly(epsilon-caprolactone) nanofibers. By electrospinning the nanofiber layers for different lengths of time, the thickness of the nanofiber layers could be modulated. Bilayered constructs consisting of microfiber scaffolds with varying thicknesses of nanofibers on top were generated and evaluated for their potential to affect rat marrow stromal cell attachment, spreading, and infiltration. Cell attachment after 24 h did not increase with increasing number of nanofibers, but the presence of nanofibers enhanced cell spreading as evidenced by stronger F-actin staining. Additionally, increasing the thickness of the nanofiber layer reduced the infiltration of cells into the scaffolds under both static and flow perfusion culture for the specific conditions tested. The scaffold design presented in this study allows for cellular infiltration into the scaffolds while at the same time providing nanofibers as a physical mimicry of extracellular matrix.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
The effect of processing variables on the morphology of electrospun nanofibers and textiles
Deitzel, J. M., Kleinmeyer, J., Harris, D., & Beck Tan, N. C. (2001) · Polymer · doi:10.1016/s0032-3861(00)00250-0 · Cited by 2,915
Electrospun nanofibrous structure: A novel scaffold for tissue engineering
Li, W., Laurencin, C. T., Caterson, E. J., Tuan, R. S., & Ko, F. K. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10167 · Cited by 2,427
Electrospinning of Polymeric Nanofibers for Tissue Engineering Applications: A Review
Pham, Q. P., Sharma, U., & Mikos, A. G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1197 · Cited by 2,256
Self-citationElectrospinning of Collagen Nanofibers
Matthews, J. A., Wnek, G. E., Simpson, D. G., & Bowlin, G. L. (2002) · Biomacromolecules · doi:10.1021/bm015533u · Cited by 2,251
The design of scaffolds for use in tissue engineering. Part I. Traditional factors
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234
A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering
Yoshimoto, H., Shin, Y. M., Terai, H., & Vacanti, J. P. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00635-x · Cited by 1,977
Subbiah, T., Bhat, G. S., Tock, R. W., Parameswaran, S., & Ramkumar, S. S. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21481 · Cited by 1,746
Effects of synthetic micro- and nano-structured surfaces on cell behavior
Flemming, R. G., Murphy, C. J., Abrams, G. A., Goodman, S. L., & Nealey, P. F. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00209-9 · Cited by 1,450
Cited by
Electrospinning: Applications in drug delivery and tissue engineering
Sill, T. J., & von Recum, H. A. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.01.011 · Cited by 3,289
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Haider, A., Haider, S., & Kang, I.-K. (2018) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2015.11.015 · Cited by 1,861
Biomimetic materials for tissue engineering
Ma, P. X. (2008) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.08.041 · Cited by 1,310
Controlling the Porosity and Microarchitecture of Hydrogels for Tissue Engineering
Annabi, N., Nichol, J. W., Zhong, X., Ji, C., Koshy, S., Khademhosseini, A., & Dehghani, F. (2010) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2009.0639 · Cited by 1,308
Three-Dimensional Cell Culture Matrices: State of the Art
Lee, J., Cuddihy, M. J., & Kotov, N. A. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/teb.2007.0150 · Cited by 1,047
Electrospinning for tissue engineering applications
Rahmati, M., Mills, D. K., Urbanska, A. M., Saeb, M. R., Venugopal, J. R., Ramakrishna, S., & Mozafari, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100721 · Cited by 816
Direct writing by way of melt electrospinning
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2011) · Advanced Materials · doi:10.1002/adma.201103482 · Cited by 800
Reinforcement of hydrogels using three-dimensionally printed microfibres
Visser, J., Melchels, F. P. W., Jeon, J. E., van Bussel, E. M., Kimpton, L. S., Byrne, H. M., Dhert, W. J. A., Dalton, P. D., Hutmacher, D. W., & Malda, J. (2015) · Nature Communications · doi:10.1038/ncomms7933 · Cited by 718
Design, fabrication and characterization of PCL electrospun scaffolds—a review
Cipitria, A., Skelton, A., Dargaville, T. R., Dalton, P. D., & Hutmacher, D. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04502k · Cited by 627
Baker, B. M., Gee, A. O., Metter, R. B., Nathan, A. S., Marklein, R. A., Burdick, J. A., & Mauck, R. L. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.01.032 · Cited by 620
Melt electrospinning today: An opportune time for an emerging polymer process
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.01.001 · Cited by 542
Electrospinning of polysaccharides for regenerative medicine
Lee, K. Y., Jeong, L., Kang, Y. O., Lee, S. J., & Park, W. H. (2009) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2009.07.006 · Cited by 530
Electrospinning of polymer nanofibers for tissue regeneration
Jiang, T., Carbone, E. J., Lo, K. W.-H., & Laurencin, C. T. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.12.001 · Cited by 487
Poly(lactic acid) nanofibrous scaffolds for tissue engineering
Santoro, M., Shah, S. R., Walker, J. L., & Mikos, A. G. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.019 · Cited by 485
Self-citationOptimizing scaffold pore size for tissue engineering: insights across various tissue types
Mukasheva, F., Adilova, L., Dyussenbinov, A., Yernaimanova, B., Abilev, M., & Akilbekova, D. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1444986 · Cited by 468
Lowery, J. L., Datta, N., & Rutledge, G. C. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.072 · Cited by 448
Gradient biomaterials for soft-to-hard interface tissue engineering
Seidi, A., Ramalingam, M., Elloumi-Hannachi, I., Ostrovidov, S., & Khademhosseini, A. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.01.011 · Cited by 398
Electrospun Fibrous Mats with High Porosity as Potential Scaffolds for Skin Tissue Engineering
Zhu, X., Cui, W., Li, X., & Jin, Y. (2008) · Biomacromolecules · doi:10.1021/bm800476u · Cited by 383
Technological advances in electrospinning of nanofibers
Teo, W.-E., Inai, R., & Ramakrishna, S. (2011) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/12/1/013002 · Cited by 361
Pektok, E., Nottelet, B., Tille, J.-C., Gurny, R., Kalangos, A., Moeller, M., & Walpoth, B. H. (2008) · Circulation · doi:10.1161/circulationaha.108.795732 · Cited by 358
Polymeric Nanofibers in Tissue Engineering
Dahlin, R. L., Kasper, F. K., & Mikos, A. G. (2011) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2011.0238 · Cited by 342
Self-citationFabrication of Electrospun Polymer Nanofibers with Diverse Morphologies
Wang, C., Wang, J., Zeng, L., Qiao, Z., Liu, X., Liu, H., Zhang, J., & Ding, J. (2019) · Molecules · doi:10.3390/molecules24050834 · Cited by 331
Rnjak-Kovacina, J., Wise, S. G., Li, Z., Maitz, P. K. M., Young, C. J., Wang, Y., & Weiss, A. S. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.05.065 · Cited by 323
Applications of electrospun nanofibers
Fang, J., Niu, H., Lin, T., & Wang, X. (2008) · Science Bulletin · doi:10.1007/s11434-008-0319-0 · Cited by 313
Shi, X., Sitharaman, B., Pham, Q. P., Liang, F., Wu, K., Edward Billups, W., Wilson, L. J., & Mikos, A. G. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.05.033 · Cited by 306
Self-citationSuperabsorbent 3D Scaffold Based on Electrospun Nanofibers for Cartilage Tissue Engineering
Chen, W., Chen, S., Morsi, Y., El-Hamshary, H., El-Newhy, M., Fan, C., & Mo, X. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06825 · Cited by 306
Controlling the porosity of fibrous scaffolds by modulating the fiber diameter and packing density
Soliman, S., Sant, S., Nichol, J. W., Khabiry, M., Traversa, E., & Khademhosseini, A. (2011) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.33010 · Cited by 305
Yang, F., Wolke, J. G. C., & Jansen, J. A. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.07.076 · Cited by 297
Polymer Fiber Scaffolds for Bone and Cartilage Tissue Engineering
Zhang, Y., Liu, X., Zeng, L., Zhang, J., Zuo, J., Zou, J., Ding, J., & Chen, X. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903279 · Cited by 294
Increasing the Pore Size of Electrospun Scaffolds
Rnjak-Kovacina, J., & Weiss, A. S. (2011) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2011.0235 · Cited by 292
Phipps, M. C., Clem, W. C., Grunda, J. M., Clines, G. A., & Bellis, S. L. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.09.080 · Cited by 287
Electrospun Nanofibers as Scaffolds for Skin Tissue Engineering
Sundaramurthi, D., Krishnan, U. M., & Sethuraman, S. (2014) · Polymer Reviews · doi:10.1080/15583724.2014.881374 · Cited by 278
Current approaches to electrospun nanofibers for tissue engineering
Rim, N. G., Shin, C. S., & Shin, H. (2013) · Biomedical Materials · doi:10.1088/1748-6041/8/1/014102 · Cited by 277
The guidance of stem cell differentiation by substrate alignment and mechanical stimulation
Subramony, S. D., Dargis, B. R., Castillo, M., Azeloglu, E. U., Tracey, M. S., Su, A., & Lu, H. H. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.11.012 · Cited by 274
Electrospun cellular microenvironments: Understanding controlled release and scaffold structure
Szentivanyi, A., Chakradeo, T., Zernetsch, H., & Glasmacher, B. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2010.12.002 · Cited by 271
Luo, C. J., Stride, E., & Edirisinghe, M. (2012) · Macromolecules · doi:10.1021/ma300656u · Cited by 262
Ekaputra, A. K., Prestwich, G. D., Cool, S. M., & Hutmacher, D. W. (2008) · Biomacromolecules · doi:10.1021/bm800565u · Cited by 253
Comparative stability studies of poly(2-methyl-2-oxazoline) and poly(ethylene glycol) brush coatings
Pidhatika, B., Rodenstein, M., Chen, Y., Rakhmatullina, E., Mühlebach, A., Acikgöz, C., Textor, M., & Konradi, R. (2012) · Biointerphases · doi:10.1007/s13758-011-0001-y · Cited by 251
Cao, H., Mchugh, K., Chew, S. Y., & Anderson, J. M. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32609 · Cited by 243
Mauck, R. L., Baker, B. M., Nerurkar, N. L., Burdick, J. A., Li, W.-J., Tuan, R. S., & Elliott, D. M. (2009) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2008.0652 · Cited by 213
Strategic Design and Fabrication of Engineered Scaffolds for Articular Cartilage Repair
Izadifar, Z., Chen, X., & Kulyk, W. (2012) · Journal of Functional Biomaterials · doi:10.3390/jfb3040799 · Cited by 203
Lee, Y. J., Lee, J.-H., Cho, H.-J., Kim, H. K., Yoon, T. R., & Shin, H. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.03.051 · Cited by 159
The nanofibrous architecture of poly(l-lactic acid)-based functional copolymers
Liu, X., & Ma, P. X. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.046 · Cited by 104
Chong, C., Wang, Y., Fathi, A., Parungao, R., Maitz, P. K., & Li, Z. (2019) · Burns · doi:10.1016/j.burns.2019.04.014 · Cited by 82
Alizadeh, S., Samadikuchaksaraei, A., Jafari, D., Orive, G., Dolatshahi‐Pirouz, A., Pezeshki‐Modaress, M., & Gholipourmalekabadi, M. (2024) · Small · doi:10.1002/smll.202309164 · Cited by 78
PCL‐PEG‐PCL film promotes cartilage regeneration in vivo
Fu, N., Liao, J., Lin, S., Sun, K., Tian, T., Zhu, B., & Lin, Y. (2016) · Cell Proliferation · doi:10.1111/cpr.12295 · Cited by 65
Zhao, H., Tang, J., Zhou, D., Weng, Y., Qin, W., Liu, C., Lv, S., Wang, W., & Zhao, X. (2020) · International Journal of Nanomedicine · doi:10.2147/ijn.s238800 · Cited by 51
Nanostructure controlled anti-cancer drug delivery using poly(ε-caprolactone) based nanohybrids
Singh, N. K., Singh, S. K., Dash, D., Das Purkayastha, B. P., Roy, J. K., & Maiti, P. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32340k · Cited by 49
Synthetic biodegradable medical polyesters
Cama, G., Mogosanu, D. E., Houben, A., & Dubruel, P. (2017) · Science and Principles of Biodegradable and Bioresorbable Medical Polymers · doi:10.1016/b978-0-08-100372-5.00003-9 · Cited by 33
Xiang, J., Li, Y., Ren, M., He, P., Liu, F., Jing, Z., Li, Y., Zhang, H., Ji, P., & Yang, S. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2021.101273 · Cited by 33
Wang, X., Jiang, H., Zhang, W., Kong, Y., Kong, D., Liu, J., & Wang, Z. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb00761h · Cited by 7
Metadata
- Authors
- Pham, Q. P., Sharma, U., & Mikos, A. G.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-09-23
- Volume
- 7
- Issue
- 10
- Pages
- 2796-2805
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2041016801
- Cited by
- 956
- References
- 42
- FWCI
- 17.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.