The DOI matches its Crossref record; 242 of the 243 references it cites were found in a registry or an index.
Biofabrication strategies for 3D in vitro models and regenerative medicine
Open accessAbstract
Organs are complex systems composed of different cells, proteins and signalling molecules that are arranged in a highly ordered structure to orchestrate a myriad of functions in our body. Biofabrication strategies can be applied to engineer 3D tissue models in vitro by mimicking the structure and function of native tissue through the precise deposition and assembly of materials and cells. This approach allows the spatiotemporal control over cell–cell and cell–extracellular matrix communication and thus the recreation of tissue-like structures. In this Review, we examine biofabrication strategies for the construction of functional tissue replacements and organ models, focusing on the development of biomaterials, such as supramolecular and photosensitive materials, that can be processed using biofabrication techniques. We highlight bioprinted and bioassembled tissue models and survey biofabrication techniques for their potential to recreate complex tissue properties, such as shape, vasculature and specific functionalities. Finally, we discuss challenges, such as scalability and the foreign body response, and opportunities in the field and provide an outlook to the future of biofabrication in regenerative medicine. Biofabrication can be applied to replicate tissues and organs for regenerative medicine and for the creation of 3D in vitro tissue models. In this Review, the recent advances in biomaterials and biofabrication technologies are discussed, and challenges and opportunities are highlighted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Commonly chosen materials include Matrigel, other natural biomaterials (e.g., gelatin, fi brin, collagen, alginate, chitosan, hyaluronic acid), and synthetic polymers (e.g., PEG, PCL) [40,87].”
From 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions (2021) · cites this paper as [40]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Common limitations, however, include slow printing speeds, development of nontoxic and printable bioinks, and insuf fi cient reproducibility to create standard models [38,40].”
From 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions (2021) · cites this paper as [40]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“Over the past decades, multiple 3D bioprinting methods have been improved to allow the design of complex cell-laden 3D constructs.”
From 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions (2021) · cites this paper as [40]
The cited source says what the claim attributes to it.
In the citing paper
“Each of these technologies is application-speci fi c and the choice depends on the type of bioink used [40,87].”
From 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions (2021) · cites this paper as [40]
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“In laser-assisted bioprinting, a high-intensity laser is used to deposit less-viscous bioinks for cell patterning, thereby preserving high cell viability.”
From 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions (2021) · cites this paper as [40]
Experimental — accuracy not yet measured
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“Despite its cell-compatibility, this is the most complex and expensive method of printing [40,90].”
From 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions (2021) · cites this paper as [40]
Experimental — accuracy not yet measuredIn the citing paper
“Biofabrication technologies, such as bioprinting, enable programmed assembly of cells into complex 3D geometries24,25.”
From 3D bioprinting of high cell-density heterogeneous tissue models through spheroid fusion within self-healing hydrogels (2021) · cites this paper as [25]
In the citing paper
“Various biofunctional materials and cell types can thus be printed simultaneously onto a substrate of cell-compatible biomaterials to build 3D complex constructs with good spatial resolution and reproducibility (Fig. 3a)130,148–151.”
From Tumor-on-a-chip: from bioinspired design to biomedical application (2021) · cites this paper as [148]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lutolf, M. P., & Hubbell, J. A. (2005) · Nature Biotechnology · doi:10.1038/nbt1055 · Cited by 4,551
Reconstituting organ-level lung functions on a chip
Huh, D., Matthews, B. D., Mammoto, A., Montoya-Zavala, M., Hsin, H. Y., & Ingber, D. E. (2010) · Science · doi:10.1126/science.1188302 · Cited by 4,250
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,942
Bhatia, S. N., & Ingber, D. E. (2014) · Nature Biotechnology · doi:10.1038/nbt.2989 · Cited by 3,305
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Hydrogels as extracellular matrix mimics for 3D cell culture
Tibbitt, M. W., & Anseth, K. S. (2009) · Biotechnology and Bioengineering · doi:10.1002/bit.22361 · Cited by 2,727
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Self-citationContinuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D. G., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., PINSCHMIDT, R. K. J., Rolland, J. P., Ermoshkin, A. V., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,295
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. K. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,873
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D. (2015) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,818
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Skeletal muscle: A brief review of structure and function
Frontera, W. R., & Ochala, J. (2015) · Calcified Tissue International · doi:10.1007/s00223-014-9915-y · Cited by 1,758
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Repair and tissue engineering techniques for articular cartilage
Makris, E. A., Gomoll, A. H., Malizos, Κ. Ν., Hu, J. C. Y., & Athanasiou, K. A. (2014) · Nature Reviews Rheumatology · doi:10.1038/nrrheum.2014.157 · Cited by 1,253
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
Spherical Cancer Models in Tumor Biology
Weiswald, L., Bellet, D. H., & Dangles‐Marie, V. (2015) · Neoplasia · doi:10.1016/j.neo.2014.12.004 · Cited by 1,194
Human tissue-engineered blood vessels for adult arterial revascularization
L’Heureux, N., Dusserre, N., König, G., Victor, B. E., Keire, P. A., Wight, T. N., Chronos, N. A. F., Kyles, A. E., Gregory, C. R., Hoyt, G. E., et al. (2006) · Nature Medicine · doi:10.1038/nm1364 · Cited by 1,083
Electronic dura mater for long-term multimodal neural interfaces
Minev, I. R., Musienko, P., Hirsch, A., Barraud, Q., Wenger, N., Moraud, E. M., Gandar, J., Capogrosso, M., Milekovic, T., Asboth, L., et al. (2015) · Science · doi:10.1126/science.1260318 · Cited by 1,082
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,074
Self-citationVascularization is the key challenge in tissue engineering
Novosel, E. C., Kleinhans, C., & Kluger, P. J. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2011.03.004 · Cited by 1,067
Badylak, S. F., Taylor, D., & Uygun, K. (2011) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071910-124743 · Cited by 1,041
Multistable Architected Materials for Trapping Elastic Strain Energy
Shan, S., Kang, S. H., Raney, J. R., Wang, P., Fang, L., Candido, F., Lewis, J. A., & Bertoldi, K. (2015) · Advanced Materials · doi:10.1002/adma.201501708 · Cited by 1,005
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,005
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Zhang, Y. S., Arneri, A., Bersini, S., Shin, S.-R., Zhu, K., Goli-Malekabadi, Z., Aleman, J., Colosi, C., Busignani, F., Dell’Erba, V., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.003 · Cited by 979
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 901
Veiseh, O., Doloff, J. C., Ma, M., Vegas, A. J., Tam, H. H., Bader, A. R., Li, J., Langan, E., Wyckoff, J., Loo, W. S., et al. (2015) · Nature Materials · doi:10.1038/nmat4290 · Cited by 897
Griffin, D., Weaver, W., Scumpia, P. O., Carlo, D. D., & Segura, T. (2015) · Nature Materials · doi:10.1038/nmat4294 · Cited by 881
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Klotz, B. J., Gawlitta, D., Rosenberg, A. J. W. P., Malda, J., & Melchels, F. P. W. (2016) · Trends in biotechnology · doi:10.1016/j.tibtech.2016.01.002 · Cited by 880
Metre-long cell-laden microfibres exhibit tissue morphologies and functions
Onoe, H., Okitsu, T., Itou, A., Kato‐Negishi, M., Gojo, R., Kiriya, D., Sato, K., Miura, S., Iwanaga, S., Kuribayashi‐Shigetomi, K., et al. (2013) · Nature Materials · doi:10.1038/nmat3606 · Cited by 863
Self-citationMicrofluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Lind, J. U., Busbee, T. A., Valentine, A. D., Pasqualini, F. S., Yuan, H., Yadid, M., Park, S.-J., Kotikian, A., Nesmith, A. P., Campbell, P. H., et al. (2017) · Nature Materials · doi:10.1038/nmat4782 · Cited by 863
Disease modeling in stem cell-derived 3D organoid systems
Dutta, D., Heo, I., & Clevers, H. (2017) · Trends in Molecular Medicine · doi:10.1016/j.molmed.2017.02.007 · Cited by 838
3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Engineering vascularized tissue
Jain, R. K., Au, P., Tam, J., Duda, D. G., & Fukumura, D. (2005) · Nature Biotechnology · doi:10.1038/nbt0705-821 · Cited by 808
Innovations in 3D printing: a 3D overview from optics to organs
Schubert, C., van Langeveld, M. C., & Donoso, L. A. (2013) · British Journal of Ophthalmology · doi:10.1136/bjophthalmol-2013-304446 · Cited by 777
The design of reversible hydrogels to capture extracellular matrix dynamics
Rosales, A. M., & Anseth, K. S. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.12 · Cited by 770
Designing Biomaterials for 3D Printing
Güvendiren, M., Molde, J., Soares, R. M. D., & Kohn, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00121 · Cited by 761
A review of rapid prototyping techniques for tissue engineering purposes
Turunen, S., Melchels, F. P. W., Grijpma, D. W., & Kellomäki, M. (2008) · Annals of Medicine · doi:10.1080/07853890701881788 · Cited by 752
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jüngst, T., Smolan, W., Schacht, K., Scheibel, T., & Gröll, J. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 741
Biofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
Self-citationDesign and Fabrication of Human Skin by Three-Dimensional Bioprinting
Lee, V., Singh, G., Trasatti, J. P., Bjornsson, C. S., Xu, X., Tran, T. N., Yoo, S., Dai, G., & Karande, P. (2013) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2013.0335 · Cited by 728
Mechanical models for living cells—a review
Lim, C. T., Zhou, E. H., & Quek, S. T. (2005) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2004.12.008 · Cited by 722
Vegas, A. J., Veiseh, O., Gürtler, M., Millman, J. R., Pagliuca, F. W., Bader, A. R., Doloff, J. C., Li, J., Chen, M., Olejnik, K., et al. (2016) · Nature Medicine · doi:10.1038/nm.4030 · Cited by 710
Bioprinting of 3D convoluted renal proximal tubules on perfusable chips
Homan, K. A., Kolesky, D. B., Skylar-Scott, M. A., Herrmann, J., Obuobi, H., Moisan, A., & Lewis, J. A. (2016) · Scientific Reports · doi:10.1038/srep34845 · Cited by 699
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & DʼLima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 688
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y.-C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 684
Biofabrication: A Guide to Technology and Terminology
Moroni, L., Boland, T., Burdick, J. A., Maria, C. D., Derby, B., Forgács, G., Gröll, J., Li, Q., Malda, J., Mironov, V. A., et al. (2017) · Trends in biotechnology · doi:10.1016/j.tibtech.2017.10.015 · Cited by 669
Self-citationBioprinting Toward Organ Fabrication: Challenges and Future Trends
Ozbolat, I. T., & Yu, Y. (2013) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2013.2243912 · Cited by 666
Writing in the granular gel medium
Bhattacharjee, T., Zehnder, S. M., Rowe, K. G., Jain, S., Nixon, R. M., Sawyer, W. G., & Angelini, T. E. (2015) · Science Advances · doi:10.1126/sciadv.1500655 · Cited by 665
Bioprinted Amniotic Fluid-Derived Stem Cells Accelerate Healing of Large Skin Wounds
Skardal, A., Mack, D. L., Kapetanovic, E., Atala, A., Jackson, J. D., Yoo, J. J., & Söker, S. (2012) · Stem Cells Translational Medicine · doi:10.5966/sctm.2012-0088 · Cited by 663
Self-citationA Versatile Synthetic Extracellular Matrix Mimic via Thiol‐Norbornene Photopolymerization
Fairbanks, B. D., Schwartz, M. P., Halevi, A. E., Nuttelman, C. R., Bowman, C. N., & Anseth, K. S. (2009) · Advanced Materials · doi:10.1002/adma.200901808 · Cited by 662
Xu, T., Binder, K. W., Albanna, M. Z., Dice, D. D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 633
Self-citationLanders, R., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00139-4 · Cited by 627
Cell sheet engineering: Recreating tissues without biodegradable scaffolds
Yang, J., Yamato, M., Kohno, C., Nishimoto-Kakiuchi, A., Sekine, H., Fukai, F., & Okano, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.061 · Cited by 627
Multi-tissue interactions in an integrated three-tissue organ-on-a-chip platform
Skardal, A., Murphy, S. V., Devarasetty, M., Mead, I., Kang, H.-W., Seol, Y.-J., Shrike Zhang, Y., Shin, S.-R., Zhao, L., Aleman, J., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-08879-x · Cited by 623
Self-citationMicrofluidic scaffolds for tissue engineering
Choi, N., Cabodi, M., Held, B., Gleghorn, J. P., Bonassar, L. J., & Stroock, A. D. (2007) · Nature Materials · doi:10.1038/nmat2022 · Cited by 618
A Tissue-Like Printed Material
Villar, G., Graham, A. D., & Bayley, H. (2013) · Science · doi:10.1126/science.1229495 · Cited by 616
A liver-on-a-chip platform with bioprinted hepatic spheroids
Bhise, N. S., Manoharan, V., Massa, S., Tamayol, A., Ghaderi, M., Miscuglio, M., Lang, Q., Shrike Zhang, Y., Shin, S. R., Calzone, G., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014101 · Cited by 615
Lee, C. H., Cook, J. L., Mendelson, A., Moioli, E. K., Yao, H., & Mao, J. J. (2010) · The Lancet · doi:10.1016/s0140-6736(10)60668-x · Cited by 614
Monodisperse Alginate Hydrogel Microbeads for Cell Encapsulation
Tan, W.-H., & Takeuchi, S. (2007) · Advanced Materials · doi:10.1002/adma.200700433 · Cited by 607
Self-citation3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Self-citationDirect 3D bioprinting of prevascularized tissue constructs with complex microarchitecture
Zhu, W. Z., Qu, X., Zhu, J., Ma, X., Patel, S. H., Liu, J., Wang, P., Lai, C. S. E., Gou, M., Xu, Y., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.01.042 · Cited by 590
A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 586
Lee, W., Debasitis, J., Lee, V. K., Lee, J.-H., Fischer, K., Edminster, K. R., Park, J., & Yoo, S.-S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.009 · Cited by 576
Moving from static to dynamic complexity in hydrogel design
Burdick, J. A., & Murphy, W. L. (2012) · Nature Communications · doi:10.1038/ncomms2271 · Cited by 573
Self-citationAtala, A., Kasper, F. K., & Mikos, A. G. (2012) · Science Translational Medicine · doi:10.1126/scitranslmed.3004890 · Cited by 559
Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations
Clausen, A., Wang, F., Jensen, J. S., Sigmund, O., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201502485 · Cited by 554
Vegas, A. J., Veiseh, O., Doloff, J. C., Ma, M., Tam, H. H., Bratlie, K., Li, J., Bader, A. R., Langan, E., Olejnik, K., et al. (2016) · Nature Biotechnology · doi:10.1038/nbt.3462 · Cited by 551
Ouyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2016) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 525
Self-citationDesigning bioinspired composite reinforcement architectures via 3D magnetic printing
Martin, J. J., Fiore, B. E., & Erb, R. M. (2015) · Nature Communications · doi:10.1038/ncomms9641 · Cited by 521
Alginate-based microcapsules for immunoisolation of pancreatic islets
de Vos, P., Faas, M. M., Strand, B. L., & Calafiore, R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.07.010 · Cited by 511
Mondschein, R. J., Kanitkar, A., Williams, C. B., Verbridge, S. S., & Long, T. E. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.005 · Cited by 496
Shi, W., Sun, M., Hu, X., Ren, B., Cheng, J., Li, C., Duan, X., Fu, X., Zhang, J., Chen, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201701089 · Cited by 485
Faulkner‐Jones, A., Fyfe, C., Cornelissen, D.-J., Gardner, J., King, J., Courtney, A., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044102 · Cited by 482
Kang, E., Jeong, G. S., Choi, Y. Y., Lee, K. H., Khademhosseini, A., & Lee, S. (2011) · Nature Materials · doi:10.1038/nmat3108 · Cited by 466
Self-citationExperimental anti-tumor therapy in 3-D: Spheroids – old hat or new challenge?
Friedrich, J., Ebner, R., & Kunz‐Schughart, L. A. (2007) · International Journal of Radiation Biology · doi:10.1080/09553000701727531 · Cited by 460
Rapid Continuous Multimaterial Extrusion Bioprinting
Liu, W. H., Zhang, Y. S., Heinrich, M. A., Ferrari, F. D., Jang, H. L., Bakht, S. M., Álvarez, M. M., Yang, J., Li, Y., Santiago, G. T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201604630 · Cited by 442
Li, C., Faulkner‐Jones, A., Dun, A. R., Jin, J., Chen, P., Xing, Y., Yang, Z., Li, Z., Shu, W., Liu, D., et al. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411383 · Cited by 423
Bioprinting of hybrid tissue constructs with tailorable mechanical properties
Schuurman, W., Khristov, V., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., & Malda, J. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/021001 · Cited by 411
Live encapsulated porcine islets from a type 1 diabetic patient 9.5 yr after xenotransplantation
Elliott, R. B., Escobar, L., Tan, P., Muzina, M., Zwain, S., & Buchanan, C. M. (2007) · Xenotransplantation · doi:10.1111/j.1399-3089.2007.00384.x · Cited by 409
Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers
Levato, R., Visser, J., Planell, J. A., Engel, E., Malda, J., & Mateos‐Timoneda, M. A. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035020 · Cited by 391
Artificial niche microarrays for probing single stem cell fate in high throughput
Gobaa, S., Hoehnel, S., Roccio, M., Negro, A., Kobel, S., & Lutolf, M. P. (2011) · Nature Methods · doi:10.1038/nmeth.1732 · Cited by 390
Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells
Gaetani, R., Doevendans, P. A., Metz, C. H. G., Alblas, J., Messina, E., Giacomello, A., & Sluijter, J. P. G. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.11.003 · Cited by 384
A 3D bioprinted complex structure for engineering the muscle–tendon unit
Merceron, T. K., Burt, M. A., Seol, Y., Kang, H.-W., Lee, S. J., Yoo, J. J., & Atala, A. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035003 · Cited by 373
Self-citation3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering
Rhee, S., Puetzer, J. L., Mason, B. N., Reinhart‐King, C. A., & Bonassar, L. J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00288 · Cited by 367
Zhang, A. P., Qu, X., Soman, P., Hribar, K. C., Lee, J. W., Chen, S., & He, S. (2012) · Advanced Materials · doi:10.1002/adma.201202024 · Cited by 366
Application areas of 3D bioprinting
Ozbolat, I. T., Peng, W., & Özbolat, V. (2016) · Drug Discovery Today · doi:10.1016/j.drudis.2016.04.006 · Cited by 364
Lee, H., & Cho, D.-W. (2016) · Lab on a Chip · doi:10.1039/c6lc00450d · Cited by 363
Ornamenting 3D printed scaffolds with cell-laid extracellular matrix for bone tissue regeneration
Pati, F., Song, T.-H., Rijal, G., Jang, J., Kim, S. W., & Cho, D. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.10.012 · Cited by 360
Direct Freeform Fabrication of Seeded Hydrogels in Arbitrary Geometries
Cohen, D. L., Malone, E., Lipson, H., & Bonassar, L. J. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1325 · Cited by 360
Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration
Gaebel, R., Ma, N., Liu, J., Guan, J., Koch, L., Klopsch, C., Gruene, M., Toelk, A., Wang, W., Mark, P., et al. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.08.071 · Cited by 351
Guided and fluidic self-assembly of microstructures using railed microfluidic channels
Chung, S. E., Park, W., Shin, S., Lee, S. A., & Kwon, S. (2008) · Nature Materials · doi:10.1038/nmat2208 · Cited by 349
Self-citationEngineering an in vitro air-blood barrier by 3D bioprinting
Horváth, L., Umehara, Y., Jud, C., Blank, F., Petri‐Fink, A., & Rothen‐Rutishauser, B. (2015) · Scientific Reports · doi:10.1038/srep07974 · Cited by 349
Layerless fabrication with continuous liquid interface production
Janusziewicz, R., Tumbleston, J. R., Quintanilla, A. L., Mecham, S. J., & DeSimone, J. M. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1605271113 · Cited by 346
Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
Hardin, J. O., Ober, T. J., Valentine, A. D., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500222 · Cited by 341
Levato, R., Webb, W. R., Otto, I. A., Mensinga, A., Zhang, Y., van Rijen, M. H. P., van Weeren, P. R., Khan, I. M., & Malda, J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.08.005 · Cited by 339
Xu, F., Celli, J., Rizvi, I., Moon, S., Hasan, T., & Demirci, U. (2011) · Biotechnology Journal · doi:10.1002/biot.201000340 · Cited by 337
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Khalil, S., & Sun, W. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3128729 · Cited by 337
Thiol–Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies
Bertlein, S., Lindberg, G. C. J., Lim, K. S., Jüngst, T., Boeck, T., Blunk, T., Teßmar, J., Hooper, G. J., Woodfield, T. B. F., & Gröll, J. (2017) · Advanced Materials · doi:10.1002/adma.201703404 · Cited by 332
Towards artificial tissue models: past, present, and future of 3D bioprinting
Yıldız, A. A., Assal, R. E., Chen, P., Güven, S., İnci, F., & Demirci, U. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014103 · Cited by 319
Gao, L., Kupfer, M. E., Jung, J. P., Yang, L., Zhang, P., Sie, Y. D., Tran, Q., Ajeti, V., Freeman, B. T., Fast, V. G., et al. (2017) · Circulation Research · doi:10.1161/circresaha.116.310277 · Cited by 316
3D Bioprinting of Tissue/Organ Models
Pati, F., Gantelius, J., & Svahn, H. A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201505062 · Cited by 315
Molding Cell Beads for Rapid Construction of Macroscopic 3D Tissue Architecture
Matsunaga, Y. T., Morimoto, Y., & Takeuchi, S. (2011) · Advanced Materials · doi:10.1002/adma.201004375 · Cited by 314
Self-citationIn situ handheld three‐dimensional bioprinting for cartilage regeneration
Di Bella, C., Duchi, S., O'Connell, C. D., Blanchard, R., Augustine, C., Yue, Z., Thompson, F., Richards, C., Beirne, S., Onofrillo, C., et al. (2018) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2476 · Cited by 313
3D bioprinted functional and contractile cardiac tissue constructs
Wang, Z., Lee, S. J., Cheng, H.-J., Yoo, J. J., & Atala, A. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.02.007 · Cited by 305
Self-citationSkeletal muscle tissue engineering: methods to form skeletal myotubes and their applications
Ostrovidov, S., Hosseini, V., Ahadian, S., Fujie, T., Parthiban, S. P., Ramalingam, M., Bae, H., Kaji, H., & Khademhosseini, A. (2014) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2013.0534 · Cited by 302
Untethered micro-robotic coding of three-dimensional material composition
Taşoğlu, S., Diller, E., Güven, S., Sitti, M., & Demirci, U. (2014) · Nature Communications · doi:10.1038/ncomms4124 · Cited by 292
Laser Printing of Stem Cells for Biofabrication of Scaffold-Free Autologous Grafts
Gruene, M., Deiwick, A., Koch, L., Schlie, S., Unger, C., Hofmann, N., Bernemann, I., Glasmacher, B., & Chichkov, B. N. (2010) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2010.0359 · Cited by 287
Doloff, J. C., Veiseh, O., Vegas, A. J., Tam, H. H., Farah, S., Ma, M., Li, J., Bader, A., Chiu, A., Sadraei, A., et al. (2017) · Nature Materials · doi:10.1038/nmat4866 · Cited by 283
DNA-directed self-assembly of shape-controlled hydrogels
Qi, H., Ghodousi, M., Du, Y., Grun, C. N., Bae, H., Yin, P., & Khademhosseini, A. (2013) · Nature Communications · doi:10.1038/ncomms3275 · Cited by 281
Self-assembled micro-organogels for 3D printing silicone structures
O’Bryan, C. S., Bhattacharjee, T., Hart, S. M., Kabb, C. P., Schulze, K. D., Chilakala, I., Sumerlin, B. S., Sawyer, W. G., & Angelini, T. E. (2017) · Science Advances · doi:10.1126/sciadv.1602800 · Cited by 277
Kluin, J., Talacua, H., Smits, A. I. P. M., Emmert, M. Y., Brugmans, M. C. P., Fioretta, E. S., Dijkman, P. E., Söntjens, S. H. M., Duijvelshoff, R., Dekker, S., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.02.007 · Cited by 270
Diamantides, N., Wang, L., Pruiksma, T., Siemiatkoski, J., Dugopolski, C., Shortkroff, S., Kennedy, S. M., & Bonassar, L. J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa780f · Cited by 254
Abaci, H. E., & Shuler, M. L. (2015) · Integrative Biology · doi:10.1039/c4ib00292j · Cited by 248
Programmed synthesis of three-dimensional tissues
Todhunter, M. E., Jee, N. Y., Hughes, A. J., Coyle, M. C., Cerchiari, A. E., Farlow, J., Garbe, J. C., LaBarge, M. A., Desai, T. A., & Gartner, Z. J. (2015) · Nature Methods · doi:10.1038/nmeth.3553 · Cited by 246
Magnetic levitation of single cells
Durmus, N. G., Tekin, H. C., Güven, S., Sridhar, K., Yıldız, A. A., Calibasi‐Kocal, G., Ghiran, I. C., Davis, R. W., Steinmetz, L. M., & Demirci, U. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509250112 · Cited by 238
Gu, Q., Tomaskovic‐Crook, E., Wallace, G. G., & Crook, J. M. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700175 · Cited by 235
Biofabrication of Cell‐Loaded 3D Spider Silk Constructs
Schacht, K., Jüngst, T., Schweinlin, M., Ewald, A., Gröll, J., & Scheibel, T. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409846 · Cited by 232
Lee, K. H., Shin, S. J., Park, Y., & Lee, S. (2009) · Small · doi:10.1002/smll.200801667 · Cited by 223
Self-citationDufrane, D., Goebbels, R., Saliez, A., Guiot, Y., & Gianello, P. (2006) · Transplantation · doi:10.1097/01.tp.0000208610.75997.20 · Cited by 219
Handheld co-axial bioprinting: application to in situ surgical cartilage repair
Duchi, S., Onofrillo, C., O’Connell, C. D., Blanchard, R., Augustine, C., Quigley, A. F., Kapsa, R. M. I., Pivonka, P., Wallace, G., Di Bella, C., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-05699-x · Cited by 219
Examination of the foreign body response to biomaterials by nonlinear intravital microscopy
Dondossola, E., Holzapfel, B. M., Alexander, S., Filippini, S., Hutmacher, D. W., & Friedl, P. (2016) · Nature Biomedical Engineering · doi:10.1038/s41551-016-0007 · Cited by 215
Cell delivery in regenerative medicine: The cell sheet engineering approach
Yang, J., Yamato, M., Nishida, K., Ohki, T., Kanzaki, M., Sekine, H., Shimizu, T., & Okano, T. (2006) · Journal of Controlled Release · doi:10.1016/j.jconrel.2006.06.022 · Cited by 214
Fabrication and characterization of bio-engineered cardiac pseudo tissues
Xu, T., Baicu, C. F., Aho, M., Zile, M. R., & Boland, T. (2009) · Biofabrication · doi:10.1088/1758-5082/1/3/035001 · Cited by 212
Kim, B. S., Kim, H., Gao, G., Jang, J., & Cho, D. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7e98 · Cited by 210
Morris, V. B., Nimbalkar, S., Younesi, M., McClellan, P. E., & Akkuş, O. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1643-1 · Cited by 209
High-Resolution Patterned Cellular Constructs by Droplet-Based 3D Printing
Graham, A. D., Olof, S. N., Burke, M., Armstrong, J. P. K., Mikhailova, E., Nicholson, J. G., Box, S. J., Szele, F. G., Perriman, A. W., & Bayley, H. (2017) · Scientific Reports · doi:10.1038/s41598-017-06358-x · Cited by 207
Multicellular Vascularized Engineered Tissues through User‐Programmable Biomaterial Photodegradation
Arakawa, C. K., Badeau, B. A., Zheng, Y. Y., & DeForest, C. A. (2017) · Advanced Materials · doi:10.1002/adma.201703156 · Cited by 202
Headen, D. M., Aubry, G., Lu, H., & Garcı́a, A. J. (2014) · Advanced Materials · doi:10.1002/adma.201304880 · Cited by 198
Bioprinting of biomimetic skin containing melanocytes
Min, D., Lee, W., Bae, I., Lee, T. R., Croce, P., & Yoo, S. (2017) · Experimental Dermatology · doi:10.1111/exd.13376 · Cited by 198
In Situ Patterning of Microfluidic Networks in 3D Cell‐Laden Hydrogels
Brandenberg, N., & Lütolf, M. P. (2016) · Advanced Materials · doi:10.1002/adma.201601099 · Cited by 195
Itô, A., Ino, K., Hayashida, M., Kobayashi, T., Matsunuma, H., Kagami, H., Ueda, M., & Honda, H. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1553 · Cited by 194
Bowles, R. D., Gebhard, H. H., Härtl, R., & Bonassar, L. J. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1107094108 · Cited by 191
Inkjet Bioprinting of 3D Silk Fibroin Cellular Constructs Using Sacrificial Alginate
Compaan, A. M., Christensen, K., & Huang, Y. H. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00432 · Cited by 190
Automated 3D bioassembly of micro-tissues for biofabrication of hybrid tissue engineered constructs
Mekhileri, N. V., Lim, K. S., Lindberg, G. C. J., Mutreja, I., Schon, B. S., Hooper, G. J., & Woodfield, T. B. F. (2017) · Biofabrication · doi:10.1088/1758-5090/aa9ef1 · Cited by 189
3D Printing by Multiphase Silicone/Water Capillary Inks
Roh, S., Parekh, D. P., Bharti, B., Stoyanov, S. D., & Velev, O. D. (2017) · Advanced Materials · doi:10.1002/adma.201701554 · Cited by 187
Cell sheet engineering for regenerative medicine: Current challenges and strategies
Owaki, T., Shimizu, T., Yamato, M., & Okano, T. (2014) · Biotechnology Journal · doi:10.1002/biot.201300432 · Cited by 186
Tissue Engineering and Regenerative Medicine: New Trends and Directions—A Year in Review
Gomes, M. E., Rodrigues, M. T., Domingues, R. M. A., & Reis, R. L. (2017) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2017.0081 · Cited by 186
Biomaterials‐Based Electronics: Polymers and Interfaces for Biology and Medicine
Muskovich, M. L., & Bettinger, C. J. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200071 · Cited by 185
Study of Droplet Formation Process during Drop-on-Demand Inkjetting of Living Cell-Laden Bioink
Xu, C., Zhang, M., Huang, Y. H., Ogale, A. A., Fu, J., & Markwald, R. R. (2014) · Langmuir · doi:10.1021/la501430x · Cited by 184
Hendrikson, W. J., Rouwkema, J., Clementi, F., van Blitterswijk, C., Farè, S., & Moroni, L. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8114 · Cited by 177
Self-citationBouyer, C., Chen, P., Güven, S., Demirtaş, T. T., Nieland, T. J. F., Padilla, F. R., & Demirci, U. (2015) · Advanced Materials · doi:10.1002/adma.201503916 · Cited by 176
Coaxial 3D bioprinting of self-assembled multicellular heterogeneous tumor fibers
Dai, X., Liu, L., Ouyang, J., Li, X., Zhang, X., Lan, Q., & Xu, T. (2017) · Scientific Reports · doi:10.1038/s41598-017-01581-y · Cited by 175
Patterning hydrogels in three dimensions towards controlling cellular interactions
Khetan, S., & Burdick, J. A. (2010) · Soft Matter · doi:10.1039/c0sm00852d · Cited by 172
Self-citationA novel bioprinting method and system for forming hybrid tissue engineering constructs
Shanjani, Y., Pan, C., Elomaa, L., & Yang, Y. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045008 · Cited by 169
Liquid-like Solids Support Cells in 3D
Bhattacharjee, T., Gil, C. J., Marshall, S. L., Urueña, J. M., O’Bryan, C. S., Carstens, M. R., Keselowsky, B. G., Palmer, G. D., Ghivizzani, S. C., Gibbs, C. P., et al. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00218 · Cited by 165
Richter, B., Hahn, V., Bertels, S., Claus, T. K., Wegener, M., Delaittre, G., Barner‐Kowollik, C., & Bastmeyer, M. (2016) · Advanced Materials · doi:10.1002/adma.201604342 · Cited by 162
Yeo, M., Lee, J., Chun, W., & Kim, G. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.5b01764 · Cited by 159
Cell sheet engineering and its application for periodontal regeneration
Iwata, T., Washio, K., Yoshida, T., Ishikawa, I., Ando, T., Yamato, M., & Okano, T. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1785 · Cited by 158
Dubbin, K., Hori, Y., Lewis, K. K., & Heilshorn, S. C. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600636 · Cited by 153
Three‐Dimensional Polymer Constructs Exhibiting a Tunable Negative Poisson's Ratio
Fozdar, D. Y., Soman, P., Lee, J., Han, L., & Chen, S. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002022 · Cited by 150
Dynamic Coordination Chemistry Enables Free Directional Printing of Biopolymer Hydrogel
Shi, L., Carstensen, H., Hölzl, K., Lunzer, M., Li, H., Hilborn, J. G., Ovsianikov, A., & Ossipov, D. A. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00128 · Cited by 148
A Bioprinted Liver-on-a-Chip for Drug Screening Applications
Knowlton, S. M., & Taşoğlu, S. (2016) · Trends in biotechnology · doi:10.1016/j.tibtech.2016.05.014 · Cited by 144
Liver-Tumor Hybrid Organoids for Modeling Tumor Growth and Drug Response In Vitro
Skardal, A., Devarasetty, M., Rodman, C., Atala, A., & Söker, S. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-015-1298-3 · Cited by 138
Cheng, S., Yu, J., Wang, N., Cao, F., Zhang, W., Bai, W., Zheng, W., & Jiang, X. (2017) · Advanced Materials · doi:10.1002/adma.201700171 · Cited by 134
Self‐assembled liver organoids recapitulate hepatobiliary organogenesis in vitro
Vyas, D., Baptista, P. M., Brovold, M., Moran, E. C., Gaston, B., Booth, C., Samuel, M., Atala, A., & Söker, S. (2017) · Hepatology · doi:10.1002/hep.29483 · Cited by 134
Microfluidics-generated pancreatic islet microfibers for enhanced immunoprotection
Jun, Y., Kim, M. J., Hwang, Y. H., Jeon, E. A., Kang, A. R., Lee, S., & Lee, D. Y. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.07.079 · Cited by 133
Self-citationPVA hydrogel sheet macroencapsulation for the bioartificial pancreas.
Qi, M., Gu, Y.-J., Sakata, N., Kim, D.-H., Shirouzu, Y., Yamamoto, C., Hiura, A., Sumi, S., & Inoue, K. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.050 · Cited by 131
Ballyns, J. J., Gleghorn, J. P., Niebrzydowski, V., Rawlinson, J., Potter, H. G., Maher, S. A., Wright, T. M., & Bonassar, L. J. (2008) · Tissue Engineering Part A · doi:10.1089/ten.tea.2007.0186 · Cited by 130
Mosaic Hydrogels: One‐Step Formation of Multiscale Soft Materials
Leng, L., McAllister, A., Zhang, B., Radisic, M., & Günther, A. (2012) · Advanced Materials · doi:10.1002/adma.201201442 · Cited by 128
King, S. M., Higgins, J. W., Nino, C., Smith, T. R., Paffenroth, E. H., Fairbairn, C. E., Docuyanan, A., Shah, V., Chen, A. E., Presnell, S. C., et al. (2017) · Frontiers in Physiology · doi:10.3389/fphys.2017.00123 · Cited by 127
Attalla, R., Ling, C. S. N., & Selvaganapathy, P. R. (2016) · Biomedical Microdevices · doi:10.1007/s10544-016-0042-6 · Cited by 126
Bioacoustic-enabled patterning of human iPSC-derived cardiomyocytes into 3D cardiac tissue
Serpooshan, V., Chen, P., Wu, H., Lee, S., Sharma, A., Hu, D. A., Venkatraman, S., Ganesan, A., Usta, O. B., Yarmush, M. L., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.03.037 · Cited by 124
Self-citationSingle Cell Microgel Based Modular Bioinks for Uncoupled Cellular Micro‐ and Macroenvironments
Kamperman, T., Henke, S., van den Berg, A., Shin, S. R., Tamayol, A., Khademhosseini, A., Karperien, M., & Leijten, J. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600913 · Cited by 123
Mouser, V. H. M., Abbadessa, A., Levato, R., Hennink, W. E., Vermonden, T., Gawlitta, D., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6265 · Cited by 121
Cui, X., Breitenkamp, K., Lotz, M., & DʼLima, D. D. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24488 · Cited by 120
3D bioprinting of GelMA scaffolds triggers mineral deposition by primary human osteoblasts
McBeth, C., Lauer, J. C., Ottersbach, M., Campbell, J., Sharon, A., & Sauer-Budge, A. F. (2016) · Biofabrication · doi:10.1088/1758-5090/aa53bd · Cited by 115
Generation of Multilayered 3D Structures of HepG2 Cells Using a Bio-printing Technique
Jeon, H., Kang, K., Park, S. A., Kim, W. D., Paik, S. S., Lee, S., Jeong, J., & Choi, D. (2016) · Gut and Liver · doi:10.5009/gnl16010 · Cited by 113
Self-citationYao, Q., Wei, B., Guo, Y., Jin, C., Du, X., Yan, C., Yan, J., Hu, W., Xu, Y., Zhou, Z., et al. (2015) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-014-5360-8 · Cited by 112
Micro‐Masonry: Construction of 3D Structures by Microscale Self‐Assembly
Fernandez, J. G., & Khademhosseini, A. (2010) · Advanced Materials · doi:10.1002/adma.200903893 · Cited by 109
Lung-On-A-Chip Technologies for Disease Modeling and Drug Development
Konar, D., Devarasetty, M., Yıldız, D. V., Atala, A., & Murphy, S. V. (2016) · Biomedical Engineering and Computational Biology · doi:10.4137/becb.s34252 · Cited by 109
Rapid Assembly of Heterogeneous 3D Cell Microenvironments in a Microgel Array
Li, Y., Chen, P., Wang, Y., Yan, S., Feng, X., Du, W., Koehler, S. A., Demirci, U., & Liu, B. (2016) · Advanced Materials · doi:10.1002/adma.201600247 · Cited by 108
Polyol-Silk Bioink Formulations as Two-Part Room-Temperature Curable Materials for 3D Printing
Jose, R. R., Brown, J. E., Polido, K. E., Omenetto, F. G., & Kaplan, D. L. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00160 · Cited by 106
Thiol-ene Clickable Poly(glycidol) Hydrogels for Biofabrication
Stichler, S., Jüngst, T., Schamel, M., Zilkowski, I., Kuhlmann, M., Bock, T. A., Blunk, T., Teßmar, J., & Gröll, J. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1633-3 · Cited by 104
3D Bioprinting of Cartilage for Orthopedic Surgeons: Reading between the Lines
Bella, C. D., Fosang, A., Donati, D. M., Wallace, G. G., & Choong, P. (2015) · Frontiers in Surgery · doi:10.3389/fsurg.2015.00039 · Cited by 102
The Survey on Cellular and Engineered Tissue Therapies in Europe in 2011
Martín, I., Baldomero, H., Bocelli‐Tyndall, C., Emmert, M. Y., Hoerstrup, S. P., Ireland, H., Passweg, J. R., & Tyndall, A. (2013) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0372 · Cited by 95
Millimeter‐Sized Neural Building Blocks for 3D Heterogeneous Neural Network Assembly
Kato‐Negishi, M., Morimoto, Y., Onoe, H., & Takeuchi, S. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201300052 · Cited by 94
Self-citationCollagen microsphere production on a chip
Hong, S., Hsu, H.-J., Kaunas, R. R., & Kameoka, J. (2012) · Lab on a Chip · doi:10.1039/c2lc40558j · Cited by 92
Song, W., Lu, Y., Frankel, A. S., An, D., Schwartz, R. E., & Ma, M. (2015) · Scientific Reports · doi:10.1038/srep16884 · Cited by 91
3D Printing of Hierarchical Silk Fibroin Structures
Sommer, M., Schaffner, M., Carnelli, D., & Studart, A. R. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11440 · Cited by 91
Almqvist, K. F., Dhollander, A. A. M., VERDONK, P. C. M., Forsyth, R. G., Verdonk, R. E., & Verbruggen, G. (2009) · The American Journal of Sports Medicine · doi:10.1177/0363546509335463 · Cited by 89
Chiang, M.-Y., Hsu, Y.-W., Hsieh, H.-Y., Chen, S., & Fan, S. (2016) · Science Advances · doi:10.1126/sciadv.1600964 · Cited by 87
Sakai, S., Yamaguchi, S., Takei, T., & Kawakami, K. (2008) · Biomacromolecules · doi:10.1021/bm800286v · Cited by 86
Development and evaluation of in vivo tissue engineered blood vessels in a porcine model
Rothuizen, T. C., Damanik, F. F. R., Lavrijsen, T., Visser, M. J. T., Hamming, J. F., Lalai, R. A., Duijs, J. M. G. J., van Zonneveld, A. J., Hoefer, I. E., van Blitterswijk, C. A., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.023 · Cited by 84
Self-citationHigh‐Throughput Fabrication and Modular Assembly of 3D Heterogeneous Microscale Tissues
Yang, W., Yu, H., Li, G., Wang, Y., & Liu, L. (2016) · Small · doi:10.1002/smll.201602769 · Cited by 84
Mogas‐Soldevila, L., Duro‐Royo, J., & Oxman, N. (2014) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2014.0014 · Cited by 81
Autologous engineering of cartilage
Emans, P. J., van Rhijn, L. W., Welting, T. J. M., Cremers, A., Wijnands, N., Spaapen, F., Voncken, J. W., & Shastri, V. P. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0907774107 · Cited by 81
Kim, K.-S., Utoh, R., Ohashi, K., Kikuchi, T., & Okano, T. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2102 · Cited by 81
Wei, D., Sun, J., Bolderson, J., Zhong, M., Dalby, M. J., Cusack, M., Yin, H., Fan, H., & Zhang, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00078 · Cited by 81
Fabrication and characterization of microgel-impregnated, thermosensitive PNIPAAm hydrogels
Zhang, X., & Chu, C. (2005) · Polymer · doi:10.1016/j.polymer.2005.08.055 · Cited by 79
Hsu, A. R., & Ellington, J. K. (2015) · Foot & Ankle Specialist · doi:10.1177/1938640015593079 · Cited by 77
Capone, S. H., Dufresne, M., Rechel, M., Fleury, M., Salsac, A., Paullier, P., Daujat‐Chavanieu, M., & Legallais, C. (2013) · PLoS ONE · doi:10.1371/journal.pone.0062032 · Cited by 75
Point-, line-, and plane-shaped cellular constructs for 3D tissue assembly
Morimoto, Y., Hsiao, A. Y., & Takeuchi, S. (2015) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2015.09.003 · Cited by 74
Self-citationBioprinting synthetic self-assembling peptide hydrogels for biomedical applications
Loo, Y., & Hauser, C. A. E. (2015) · Biomedical Materials · doi:10.1088/1748-6041/11/1/014103 · Cited by 72
Research works printed but not linked: 2
- Levato, R. et al. The bio in the ink: cartilage regeneration with bioprintable hydrogels and articular cartilage-derived progenitor cells. Acta Biomaterialia (2017). · DOI
- Shi, W. et al. Structurally and functionally optimized silk-fibroin–gelatin scaffold using 3D printing to repair cartilage injury in vitro and in vivo. Adv. Mater. 29, 1701089 (2017). · DOI
Cited by
Sorted by citations
Hydrogel microparticles for biomedical applications
Daly, A. C., Riley, L., Segura, T., & Burdick, J. A. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0148-6 · Cited by 1,285
Self-citation3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K.-H., & Gelinsky, M. (2020) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2020.100543 · Cited by 899
Nam, S., & Mooney, D. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00798 · Cited by 764
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
3D Cell Culture Systems: Tumor Application, Advantages, and Disadvantages
Habanjar, O., Diab‐Assaf, M., Caldefie‐Chezet, F., & Delort, L. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms222212200 · Cited by 590
Metadata
- Authors
- Moroni, L., Burdick, J. A., Highley, C., Lee, S. J., Morimoto, Y., Takeuchi, S., & Yoo, J. J.
- Affiliations
- Maastricht University (NL)
- University of Pennsylvania (US)
- Wake Forest University Health Sciences (US)
- Institute of Industrial Science, The University of Tokyo (JP)
- Corresponding author
- Moroni, Lorenzo
- ORCID
- Venue
- Nature Reviews Materials
- Published
- 2018-04-26
- Volume
- 3
- Issue
- 5
- Pages
- 21-37
- ISSN
- 2058-8437 (ISSN-L)
- PMC
- PMC6586020
- OpenAlex
- W2799893835
- Cited by
- 753
- References
- 243
- Citations by year
- 2026: 57 · 2025: 103 · 2024: 89 · 2023: 104 · 2022: 104 · 2021: 129 · 2020: 97 · 2019: 54 · 2018: 13
- FWCI
- 5.97
- Type
- journal article
- Language
- en
- Update notices
- correction (2018-05-03)
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Nature Reviews Materials (publishedVersion, cc-by)
- PubMed (publishedVersion)
- PubMed Central (acceptedVersion)
- Research Publications (Maastricht University) (submittedVersion, cc-by)
- Research Publications (Maastricht University) (submittedVersion, other-oa)
- Funders
- AO Foundation
- National Institutes of Health
- Japan Society for the Promotion of Science (16H06329)
- National Institute of Biomedical Imaging and Bioengineering (P41EB023833)
- H2020 European Research Council (637308)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- biofabrication, regenerative medicine, bioprinting, biomaterials, supramolecular materials, photoresponsive materials, tissue engineering, vascular system, foreign body reaction, scalability, organ models
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
