The DOI matches its Crossref record; 139 of the 139 references it cites were found in a registry or an index.
Let there be chip—towards rapid prototyping of microfluidic devices: one-step manufacturing processes
Abstract
Microfluidics is an evolving scientific field with immense commercial potential: analytical applications, such as biochemical assay development, biochemical analysis and biosensors as well as chemical synthesis applications essentially require microfluidics for sample handling, treatment or readout. A number of techniques are available to create microfluidic structures today. On industrial scale replication techniques such as injection molding are the gold standard whereas academic research mostly focuses on replication by casting of soft elastomers such as polydimethylsiloxane (PDMS). Both of these techniques require the creation of a replication master thus creating the microfluidic structure only in the second process step—they can therefore be termed two-(or multi-)step manufacturing techniques. However, very often the number of pieces to be created of one specific microfluidic design is low, sometimes even as low as one. This raises the question if two-step manufacturing is an appropriate choice, particularly if short concept-to-chip times are required. In this case one-step manufacturing techniques that allow the direct creation of microfluidic structures from digital three-dimensional models are preferable. For these processes the number of parts per design is low (sometimes as low as one), but quick adaptation is possible by simply changing digital data. Suitable techniques include, among others, maskless or mask based stereolithography, fused deposition molding and 3D printing. This work intends to discuss the potential and application examples of such processes with a detailed view on applicable materials. It will also point out the advantages and the disadvantages of the respective technique. Furthermore this paper also includes a discussion about non-conventional manufacturing equipment and community projects that can be used in the production of microfluidic devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The origins and the future of microfluidics
Whitesides, G. M. (2006) · Nature · doi:10.1038/nature05058 · Cited by 9,687
Two-photon laser scanning fluorescence microscopy
Denk, W., Strickler, J. H., & Webb, W. W. (1990) · Science · doi:10.1126/science.2321027 · Cited by 9,488
High-performance heat sinking for VLSI
Tuckerman, D. B., & Pease, R. F. W. (1981) · IEEE Electron Device Letters · doi:10.1109/edl.1981.25367 · Cited by 5,291
Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane)
Duffy, D. C., McDonald, J. C., Schueller, O. J. A., & Whitesides, G. M. (1998) · Analytical Chemistry · doi:10.1021/ac980656z · Cited by 5,288
Stimulated Optical Radiation in Ruby
MAIMAN, T. H. (1960) · Nature · doi:10.1038/187493a0 · Cited by 5,121
State of Understanding of Nafion
Mauritz, K. A., & Moore, R. B. (2004) · Chemical Reviews · doi:10.1021/cr0207123 · Cited by 4,791
Microfluidics: Fluid physics at the nanoliter scale
Squires, T. M., & Quake, S. R. (2005) · Reviews of Modern Physics · doi:10.1103/revmodphys.77.977 · Cited by 4,379
Miniaturized total chemical analysis systems: A novel concept for chemical sensing
Manz, A., Graber, N., & Widmer, H. M. (1990) · Sensors and Actuators B: Chemical · doi:10.1016/0925-4005(90)80209-i · Cited by 3,122
Patterned Paper as a Platform for Inexpensive, Low‐Volume, Portable Bioassays
Martinez, A. W., Phillips, S. T., Butte, M. J., & Whitesides, G. M. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200603817 · Cited by 2,874
Über Elementarakte mit zwei Quantensprüngen
Göppert‐Mayer, M. (1931) · Annalen der Physik · doi:10.1002/andp.19314010303 · Cited by 2,691
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Laser, D. J., & Santiago, J. G. (2004) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/14/6/r01 · Cited by 1,848
Physics and Applications of Microfluidics in Biology
Beebe, D. J., Mensing, G. A., & Walker, G. M. (2002) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.4.112601.125916 · Cited by 1,800
Nguyen, N.-T., & Wu, Z. (2005) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/15/2/r01 · Cited by 1,652
Kumar, A., & Whitesides, G. M. (1993) · Applied Physics Letters · doi:10.1063/1.110628 · Cited by 1,605
Handbook of Radical Polymerization
(2002) · Wiley eBooks · doi:10.1002/0471220450 · Cited by 1,595
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Thiol–enes: Chemistry of the past with promise for the future
Hoyle, C. E., Lee, T. Y., & Roper, T. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.20366 · Cited by 1,457
A gas chromatographic air analyzer fabricated on a silicon wafer
Terry, S. C., Jerman, J. H., & Angell, J. B. (1979) · IEEE Transactions on Electron Devices · doi:10.1109/t-ed.1979.19791 · Cited by 1,452
Two-Photon Excitation in CaF2:Eu2+
Kaiser, W., & Garrett, C. G. B. (1961) · Physical Review Letters · doi:10.1103/physrevlett.7.229 · Cited by 1,339
Three-dimensional microfluidic devices fabricated in layered paper and tape
Martinez, A. W., Phillips, S. T., & Whitesides, G. M. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0810903105 · Cited by 1,246
Becker, H. (2002) · Talanta · doi:10.1016/s0039-9140(01)00594-x · Cited by 1,187
SU-8: a low-cost negative resist for MEMS
Lorenz, H., Despont, M., Fahrni, N., LaBianca, N., Renaud, P., & Vettiger, P. (1997) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/7/3/010 · Cited by 979
Review on micro molding of thermoplastic polymers
Heckele, M., & Schomburg, W. K. (2004) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/14/3/r01 · Cited by 915
Polymer microfabrication technologies for microfluidic systems
Becker, H., & Gärtner, C. (2008) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-007-1692-2 · Cited by 860
The power of thiol‐ene chemistry
Kade, M. J., Burke, D. J., & Hawker, C. J. (2010) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23824 · Cited by 853
Oh, K. W., & Ahn, C. H. (2006) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/16/5/r01 · Cited by 838
Rapid prototyping in tissue engineering: challenges and potential
Yeong, W.-Y., Chua, C.-K., Leong, K.-F., & Chandrasekaran, M. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.10.004 · Cited by 807
Surface acoustic wave biosensors: a review
Länge, K., Rapp, B. E., & Rapp, M. (2008) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-008-1911-5 · Cited by 806
Self-citationPolymer microfabrication methods for microfluidic analytical applications
Becker, H., & Gärtner, C. (2000) · Electrophoresis · doi:10.1002/(sici)1522-2683(20000101)21:1<12::aid-elps12>3.0.co;2-7 · Cited by 795
Ko, S. H., Pan, H., Grigoropoulos, C. P., Luscombe, C. K., Fréchet, J. M. J., & Poulikakos, D. (2007) · Nanotechnology · doi:10.1088/0957-4484/18/34/345202 · Cited by 770
Inkjet-Printed Microfluidic Multianalyte Chemical Sensing Paper
Abe, K., Suzuki, K., & Citterio, D. (2008) · Analytical Chemistry · doi:10.1021/ac800604v · Cited by 766
Making polymeric micro- and nanoparticles of complex shapes
Champion, J. A., Katare, Y. K., & Mitragotri, S. (2007) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0705326104 · Cited by 747
Bulk micromachining of silicon
Kovacs, G. T. A., Maluf, N. I., & Petersen, K. E. (1998) · Proceedings of the IEEE · doi:10.1109/5.704259 · Cited by 733
Short fiber reinforced composites for fused deposition modeling
Zhong, W., Li, F., Zhang, Z., Song, L., & Li, Z. (2001) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(00)01810-4 · Cited by 721
Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly
Therriault, D., White, S. R., & Lewis, J. A. (2003) · Nature Materials · doi:10.1038/nmat863 · Cited by 707
FLASH: A rapid method for prototyping paper-based microfluidic devices
Martinez, A. W., Phillips, S. T., Wiley, B. J., Gupta, M., & Whitesides, G. M. (2008) · Lab on a Chip · doi:10.1039/b811135a · Cited by 695
Woodfield, T. B. F., Malda, J., de Wijn, J., Péters, F., Riesle, J., & van Blitterswijk, C. A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.056 · Cited by 618
Serbin, J., Egbert, A., Ostendorf, A., Chichkov, B. N., Houbertz, R., Domann, G., Schulz, J., Cronauer, C., Fröhlich, L., & Popall, M. (2003) · Optics Letters · doi:10.1364/ol.28.000301 · Cited by 592
Abgrall, P., & Gué, A.-M. (2007) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/17/5/r01 · Cited by 561
Biocompatibility and biofouling of MEMS drug delivery devices
Voskerician, G., Shive, M. S., Shawgo, R. S., Recum, H. V., Anderson, J. M., Cima, M. J., & Langer, R. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00565-3 · Cited by 558
Johnson, T. J., Ross, D., & Locascio, L. E. (2002) · Analytical Chemistry · doi:10.1021/ac010895d · Cited by 547
Absorptance of powder materials suitable for laser sintering
Tolochko, N. K., Khlopkov, Y. V., Mozzharov, S. E., Ignatiev, M. B., Laoui, T., & Titov, V. I. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337029 · Cited by 518
Verpoorte, E., & De Rooij, N. F. (2003) · Proceedings of the IEEE · doi:10.1109/jproc.2003.813570 · Cited by 503
Uber Elementarrakte mit zwei Quantensprungen
Goppert-Mayer, V. M. (1931) · Annals of Physics · Cited by 500
UV Laser Machined Polymer Substrates for the Development of Microdiagnostic Systems
Roberts, M. A., Rossier, J. S., Bercier, P., & Girault, H. (1997) · Analytical Chemistry · doi:10.1021/ac961038q · Cited by 497
Klank, H., Kutter, J. P., & Geschke, O. (2002) · Lab on a Chip · doi:10.1039/b206409j · Cited by 477
Micro-injection moulding of polymer microfluidic devices
Attia, U. M., Marson, S., & Alcock, J. R. (2009) · Microfluidics and Nanofluidics · doi:10.1007/s10404-009-0421-x · Cited by 474
Developments and new applications of UV-induced surface graft polymerizations
DENG, J., WANG, L., LIU, L., & YANG, W. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.06.002 · Cited by 465
Cyclic olefin polymers: emerging materials for lab-on-a-chip applications
Nunes, P. S., Ohlsson, P. D., Ordeig, O., & Kutter, J. P. (2010) · Microfluidics and Nanofluidics · doi:10.1007/s10404-010-0605-4 · Cited by 434
Fluoroelastomers: synthesis, properties and applications
Améduri, B., Boutevin, B., & Kostov, G. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00044-7 · Cited by 434
The autofluorescence of plastic materials and chips measured under laser irradiation
Piruska, A., Nikcevic, I., Lee, S. H., Ahn, C., Heineman, W. R., Limbach, P. A., & Seliskar, C. J. (2005) · Lab on a Chip · doi:10.1039/b508288a · Cited by 431
Nisisako, T., & Torii, T. (2008) · Lab Chip · doi:10.1039/b713141k · Cited by 415
Continuous-Wave Laser Action on Vibrational-Rotational Transitions of CO2
Patel, C. K. N. (1964) · Physical Review · doi:10.1103/physrev.136.a1187 · Cited by 412
Posner, T. (1905) · Berichte der deutschen chemischen Gesellschaft · doi:10.1002/cber.190503801106 · Cited by 385
Microfluidic tectonics: A comprehensive construction platform for microfluidic systems
Beebe, D. J., Moore, J. S., Yu, Q., Liu, R. H., Kraft, M. L., Jo, B.-H., & Devadoss, C. (2000) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.250273097 · Cited by 353
Choi, K. M., & Rogers, J. A. (2003) · Journal of the American Chemical Society · doi:10.1021/ja029973k · Cited by 309
Fabrication of porous scaffolds for bone tissue engineering via low-temperature deposition
Xiong, Z. (2002) · Scripta Materialia · doi:10.1016/s1359-6462(02)00071-4 · Cited by 307
A new fabrication process for ultra-thick microfluidic microstructures utilizing SU-8 photoresist
Lin, C.-H., Lee, G.-B., Chang, B.-W., & Chang, G.-L. (2002) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/12/5/312 · Cited by 306
Microfluidic Multicompartment Device for Neuroscience Research
Taylor, A. M., Rhee, S. W., Tu, C. H., Cribbs, D. H., Cotman, C. W., & Jeon, N. L. (2003) · Langmuir · doi:10.1021/la026417v · Cited by 295
Heterogeneous catalytic synthesis using microreactor technology
Frost, C. G., & Mutton, L. (2010) · Green Chemistry · doi:10.1039/c0gc00133c · Cited by 292
Patterned cell culture inside microfluidic devices
Rhee, S. W., Taylor, A. M., Tu, C. H., Cribbs, D. H., Cotman, C. W., & Jeon, N. L. (2005) · Lab on a Chip · doi:10.1039/b403091e · Cited by 283
Fabrication of 3D chitosan–hydroxyapatite scaffolds using a robotic dispensing system
Ang, T. H., Sultana, F. S. A., Hutmacher, D. W., Wong, Y. S., Fuh, J. Y. H., Mo, X. M., Loh, H. T., Burdet, E., & Teoh, S. H. (2002) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(02)00010-3 · Cited by 278
Photochemistry of triarylsulfonium salts
Dektar, J. L., & Hacker, N. P. (1990) · Journal of the American Chemical Society · doi:10.1021/ja00172a015 · Cited by 270
Prototyping of Microfluidic Devices in Poly(dimethylsiloxane) Using Solid-Object Printing
McDonald, J. C., Chabinyc, M. L., Metallo, S. J., Anderson, J. R., Stroock, A. D., & Whitesides, G. M. (2002) · Analytical Chemistry · doi:10.1021/ac010938q · Cited by 266
Influence of Type of Initiation on Thiol–Ene “Click” Chemistry
Uygun, M., Tasdelen, M. A., & Yagci, Y. (2010) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200900442 · Cited by 256
Thiol/ene photocurable polymers
Morgan, C. R., Magnotta, F., & Ketley, A. D. (1977) · Journal of Polymer Science: Polymer Chemistry Edition · doi:10.1002/pol.1977.170150311 · Cited by 256
Direct-write laser micromachining and universal surface modification of PMMA for device development
Cheng, J.-Y., Wei, C.-W., Hsu, K.-H., & Young, T.-H. (2004) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2003.10.022 · Cited by 251
Vozzi, G., Previti, A., De Rossi, D., & Ahluwalia, A. (2002) · Tissue Engineering · doi:10.1089/107632702320934182 · Cited by 249
SU‐8 as a structural material for labs‐on‐chips and microelectromechanical systems
Abgrall, P., Conedera, V., Camon, H., Gue, A., & Nguyen, N. (2007) · ELECTROPHORESIS · doi:10.1002/elps.200700333 · Cited by 242
Precision extruding deposition and characterization of cellular poly‐ε‐caprolactone tissue scaffolds
Wang, F., Shor, L., Darling, A., Khalil, S., Sun, W., Güçeri, S., & Lau, A. (2004) · Rapid Prototyping Journal · doi:10.1108/13552540410512525 · Cited by 241
Multilayer microfluidic PEGDA hydrogels
Cuchiara, M. P., Allen, A. C. B., Chen, T. M., Miller, J. S., & West, J. L. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.031 · Cited by 236
Manz, A., Fettinger, J. C., Verpoorte, E., Lüdi, H., Widmer, H. M., & Harrison, D. J. (1991) · TrAC Trends in Analytical Chemistry · doi:10.1016/0165-9936(91)85116-9 · Cited by 228
State-of-the-art in microreaction technology: concepts, manufacturing and applications
Löwe, H., & Ehrfeld, W. (1999) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00071-7 · Cited by 215
Low-cost rapid prototyping of flexible microfluidic devices using a desktop digital craft cutter
Yuen, P. K., & Goral, V. N. (2010) · Lab Chip · doi:10.1039/b918089c · Cited by 212
Shrinky-Dink microfluidics: rapid generation of deep and rounded patterns
Grimes, A., Breslauer, D. N., Long, M., Pegan, J., Lee, L. P., & Khine, M. (2008) · Lab Chip · doi:10.1039/b711622e · Cited by 211
A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips
Zhang, M., Wu, J., Wang, L., Xiao, K., & Wen, W. (2010) · Lab on a Chip · doi:10.1039/b923101c · Cited by 206
Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds
Arcaute, K., Mann, B., & Wicker, R. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.017 · Cited by 205
Choi, J.-W., Wicker, R., Lee, S.-H., Choi, K.-H., Ha, C.-S., & Chung, I. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.05.004 · Cited by 200
Extreme ultraviolet lithography
Stulen, R. H., & Sweeney, D. W. (1999) · IEEE Journal of Quantum Electronics · doi:10.1109/3.760315 · Cited by 196
Frontal Photopolymerization for Microfluidic Applications
Cabral, J. T., Hudson, S. D., Harrison, C., & Douglas, J. F. (2004) · Langmuir · doi:10.1021/la049501e · Cited by 192
Laser processing for bio-microfluidics applications (part I)
Khan Malek, C. G. (2006) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-006-0514-2 · Cited by 190
Microfluidic channel fabrication in dry film resist for production and prototyping of hybrid chips
Vulto, P., Glade, N., Altomare, L., Bablet, J., Tin, L. D., Medoro, G., Chartier, I., Manaresi, N., Tartagni, M., & Guerrieri, R. (2005) · Lab on a Chip · doi:10.1039/b411885e · Cited by 187
Rapid prototyping of small size objects
Bertsch, A., Bernhard, P., Vogt, C., & Renaud, P. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010373362 · Cited by 180
Fused deposition modeling of patient‐specific polymethylmethacrylate implants
Espalin, D., Arcaute, K., Rodriguez, D., Medina, F., Posner, M., & Wicker, R. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011034825 · Cited by 176
Teo, E. Y., Ong, S.-Y., Khoon Chong, M. S., Zhang, Z., Lu, J., Moochhala, S., Ho, B., & Teoh, S.-H. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.08.089 · Cited by 176
Lucio do Lago, C., Torres da Silva, H. D., Neves, C. A., Alves Brito-Neto, J. G., & Fracassi da Silva, J. A. (2003) · Analytical Chemistry · doi:10.1021/ac034437b · Cited by 172
Wu, D., Chen, Q.-D., Niu, L.-G., Wang, J.-N., Wang, J., Wang, R., Xia, H., & Sun, H.-B. (2009) · Lab on a Chip · doi:10.1039/b902159k · Cited by 170
PMMA to SU-8 bonding for polymer based lab-on-a-chip systems with integrated optics
Bilenberg, B., Nielsen, T., Clausen, B., & Kristensen, A. (2004) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/14/6/008 · Cited by 166
Ink jet printing nozzle arrays etched in silicon
BASSOUS, E., Taub, H. H., & Kuhn, L. (1977) · Applied Physics Letters · doi:10.1063/1.89587 · Cited by 153
Laser processing for bio-microfluidics applications (part II)
Malek, C. K. (2006) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-006-0517-z · Cited by 153
Multi-material microstereolithography
Choi, J.-W., MacDonald, E. W., & Wicker, R. B. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2434-8 · Cited by 149
On-chip electro membrane extraction
Petersen, N. J., Jensen, H. M., Hansen, S. H., et al. (2010) · Microfluidics and Nanofluidics · doi:10.1007/s10404-010-0603-6 · Cited by 145
Rapidly Prototyped Three-Dimensional Nanofluidic Channel Networks in Glass Substrates
Ke, K., Hasselbrink, E. F., & Hunt, A. J. (2005) · Analytical Chemistry · doi:10.1021/ac0505167 · Cited by 136
Kumi, G., Yanez, C. O., Belfield, K. D., & Fourkas, J. T. (2010) · Lab on a Chip · doi:10.1039/b923377f · Cited by 133
Xiong, Z., Yan, Y., Zhang, R., & Sun, L. (2001) · Scripta Materialia · doi:10.1016/s1359-6462(01)01094-6 · Cited by 133
Processing of Piezocomposites by Fused Deposition Technique
Bandyopadhyay, A. K., Panda, R. K., Janas, V. F., Agarwala, M. K., Danforth, S. C., & Safari, A. (1997) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1997.tb02993.x · Cited by 123
Whitesides, G. M. (2010) · Lab on a Chip · doi:10.1039/c0lc90101f · Cited by 116
Hype, hope and hubris: the quest for the killer application in microfluidics
Becker, H. (2009) · Lab on a Chip · doi:10.1039/b911553f · Cited by 114
Polymer synthesis: theory and practice: fundamentals, methods, experiments
Braun, D. (2005) · Choice Reviews Online · doi:10.5860/choice.42-5285 · Cited by 110
(2009) · doi:10.1039/b916505n · Cited by 109
Three‐dimensional femtosecond laser micromachining of photosensitive glass for biomicrochips
Sugioka, K., Hanada, Y., & Midorikawa, K. (2009) · Laser & Photonics Review · doi:10.1002/lpor.200810074 · Cited by 106
Medical prototyping using two photon polymerization
Narayan, R. J., Doraiswamy, A., Chrisey, D. B., & Chichkov, B. N. (2010) · Materials Today · doi:10.1016/s1369-7021(10)70223-6 · Cited by 105
Wägli, P., Homsy, A., & de Rooij, N. F. (2011) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2011.02.005 · Cited by 105
Two-Photon Three-Dimensional Microfabrication of Poly(Dimethylsiloxane) Elastomers
Coenjarts, C. A., & Ober, C. K. (2004) · Chemistry of Materials · doi:10.1021/cm048717z · Cited by 103
Rapid Prototyping of Thermoset Polyester Microfluidic Devices
Fiorini, G. S., Lorenz, R. M., Kuo, J. S., & Chiu, D. T. (2004) · Analytical Chemistry · doi:10.1021/ac0498922 · Cited by 102
Polymer microchips bonded by O2-plasma activation
Wu, Z., Xanthopoulos, N., Reymond, F., Rossier, J. S., & Girault, H. H. (2002) · Electrophoresis · Cited by 100
Novel Poly(dimethylsiloxane) Bonding Strategy via Room Temperature “Chemical Gluing”
Lee, N. Y., & Chung, B. H. (2009) · Langmuir · doi:10.1021/la802823e · Cited by 96
Erratum: Porous scaffold design for tissue engineering
Hollister, S. J. (2006) · Nature Materials · doi:10.1038/nmat1683 · Cited by 93
Fabrication of Versatile Channel Flow Cells for Quantitative Electroanalysis Using Prototyping
Snowden, M. E., King, P. H., Covington, J. A., Macpherson, J. V., & Unwin, P. R. (2010) · Analytical Chemistry · doi:10.1021/ac100345v · Cited by 91
Ro, K. W., Liu, J., & Knapp, D. R. (2006) · Journal of Chromatography A · doi:10.1016/j.chroma.2006.01.105 · Cited by 85
Rapid fabrication of microfluidic devices in poly(dimethylsiloxane) by photocopying
Tan, A., Rodgers, K., Murrihy, J. P., O’Mathúna, C., & Glennon, J. D. (2001) · Lab on a Chip · doi:10.1039/b102905n · Cited by 84
New family of fluorinated polymer chips for droplet and organic solvent microfluidics
Begolo, S., Colas, G., Viovy, J., & Malaquin, L. (2010) · Lab on a Chip · doi:10.1039/c0lc00356e · Cited by 79
3D scaffold fabrication with PPF/DEF using micro-stereolithography
Lee, J., Lan, P. X., Kim, B. G., Lim, G., & Cho, D. (2007) · Microelectronic Engineering · doi:10.1016/j.mee.2007.01.267 · Cited by 77
Kristensen, B. W., Noraberg, J., Thiébaud, P., Koudelka‐Hep, M., & Zimmer, J. (2001) · Brain Research · doi:10.1016/s0006-8993(00)03304-7 · Cited by 76
Vulto, P., Huesgen, T., Albrecht, B., & Urban, G. A. (2009) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/19/7/077001 · Cited by 75
Rapid prototyping of robust and versatile microfluidic components using adhesive transfer tapes
Nath, P., Fung, D., Kunde, Y. A., Zeytun, A., Branch, B. A., & Goddard, G. (2010) · Lab on a Chip · doi:10.1039/c002457k · Cited by 74
Print-and-Peel Fabrication for Microfluidics: What’s in it for Biomedical Applications?
Thomas, M. S., Millare, B., Clift, J. M., Bao, D., Hong, C., & Vullev, V. I. (2009) · Annals of Biomedical Engineering · doi:10.1007/s10439-009-9831-x · Cited by 72
Shah, J. J., Geist, J., Locascio, L. E., et al. (2006) · Electrophoresis · doi:10.1002/elps.200600118 · Cited by 70
Rapid fabrication of tooling for microfluidic devices via laser micromachining and hot embossing
Shiu, P. P., Knopf, G. K., Ostojic, M., & Nikumb, S. K. (2008) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/18/2/025012 · Cited by 66
Yang, W. W., Lü, Y., Xiang, Z. Y., & Luo, G. S. (2006) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2006.10.005 · Cited by 64
Water‐soluble photopolymers for rapid prototyping of cellular materials
Liska, R., Schwager, F., Maier, C., Cano‐Vives, R., & Stampfl, J. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.22025 · Cited by 64
Facile synthesis of poly(hydroxyethyl acrylate) by frontal free‐radical polymerization
Chen, S., Hu, T., Tian, Y., Chen, L., & Pojman, J. A. (2007) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.21865 · Cited by 62
Becker, H. (2009) · Lab on a Chip · doi:10.1039/b925993g · Cited by 58
Piccin, E., Coltro, W. K. T., da Silva, J. A. F., Neto, S. C., Mazo, L. H., & Carrilho, E. (2007) · Journal of Chromatography A · doi:10.1016/j.chroma.2007.09.081 · Cited by 49
Lab-on-a-print: from a single polymer film to three-dimensional integrated microfluidics
Wang, W., Zhao, S., & Pan, T. (2009) · Lab on a Chip · doi:10.1039/b816287e · Cited by 42
Microfluidic chip fabrication using hot embossing and thermal bonding of COP
Pemg, B., Wu, C., Shen, Y., et al. (2009) · Polymers for Advanced Technologies · doi:10.1002/pat.1447 · Cited by 42
Rapid laser prototyping of plasmonic components
Reinhardt, C., Kiyan, R. V., Passinger, S., Stepanov, A. L., Ostendorf, A., & Chichkov, B. N. (2007) · Applied Physics A · doi:10.1007/s00339-007-4118-2 · Cited by 41
Delille, R., Urdaneta, M., Moseley, S. J., & Smela, E. (2006) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2006.882610 · Cited by 37
Print-and-Peel Fabrication of Microelectrodes
Hong, C., Bao, D., Thomas, M. S., Clift, J. M., & Vullev, V. I. (2008) · Langmuir · doi:10.1021/la801752k · Cited by 37
Benchtop fabrication of PDMS microstructures by an unconventional photolithographic method
Hwang, C. M., Sim, W. Y., Lee, S., Foudeh, A. M., Bae, H., Lee, S., & Khademhosseini, A. (2010) · Biofabrication · doi:10.1088/1758-5082/2/4/045001 · Cited by 28
Willis, P. A., Greer, F., Lee, M., Smith, J. A., White, V. E., Grunthaner, F. J., Sprague, J. J., & Rolland, J. P. (2008) · Lab on a Chip · doi:10.1039/b804265a · Cited by 27
Young, P. L., Brackbill, T. P., & Kandlikar, S. G. (2008) · Heat Transfer Engineering · doi:10.1080/01457630802293464 · Cited by 26
Choi, H. W., Bong, S., Farson, D. F., Lu, C., & Lee, L. J. (2009) · Journal of Laser Applications · doi:10.2351/1.3263118 · Cited by 24
Surface-Reactive Acrylic Copolymer for Fabrication of Microfluidic Devices
Liu, J., Sun, X., & Lee, M. L. (2005) · Analytical Chemistry · doi:10.1021/ac0580060 · Cited by 23
Rolland, J. P., van Dam, R. M., Schorzman, D. A., Quake, S. R., & DeSimone, J. M. (2004) · Journal of the American Chemical Society · doi:10.1021/ja040811t · Cited by 20
Reichert, A., Felbel, J., Kielpinski, M., Urban, M., Steinbrecht, B., & Henkel, T. (2008) · Journal of Bionic Engineering · doi:10.1016/s1672-6529(08)60173-0 · Cited by 17
Oxygen inhibition of photopolymerization processes and methods of its suppression
Biernat, M., & Rokicki, G. (2005) · Polimery · doi:10.14314/polimery.2005.633 · Cited by 15
Characterisation of rapid prototyping techniques for studies in cell behaviour
Maher, P. S., Keatch, R. P., & Donnelly, K. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011025834 · Cited by 12
Cited by
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
The upcoming 3D-printing revolution in microfluidics
Bhattacharjee, N., Urrios, A., Kang, S., & Folch, A. (2016) · Lab on a Chip · doi:10.1039/c6lc00163g · Cited by 1,123
3D printed microfluidic devices: enablers and barriers
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039
Au, A. K., Huynh, W., Horowitz, L. F., & Folch, A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201504382 · Cited by 788
3D printed microfluidics for biological applications
Ho, C. M. B., Ng, S. H., Li, K. H. H., & Yoon, Y.-J. (2015) · Lab on a Chip · doi:10.1039/c5lc00685f · Cited by 704
Metadata
- Authors
- Waldbaur, A., Rapp, H., Länge, K., & Rapp, B. E.
- Venue
- Analytical Methods
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 3
- Issue
- 12
- Pages
- 2681
- ISSN
- 1759-9660 (ISSN-L)
- 1759-9679
- OpenAlex
- W2121099951
- Cited by
- 381
- References
- 139
- FWCI
- 8.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.