Printability in extrusion bioprinting
Open accessThe DOI matches its Crossref record; 108 of the 108 references it cites were found in a registry or an index.
Abstract
Extrusion bioprinting has been widely used to extrude continuous filaments of bioink (or the mixture of biomaterial and living cells), layer-by-layer, to build three-dimensional constructs for biomedical applications. In extrusion bioprinting, printability is an important parameter used to measure the difference between the designed construct and the one actually printed. This difference could be caused by the extrudability of printed bioink and/or the structural formability and stability of printed constructs. Although studies have reported in characterizing printability based on the bioink properties and printing process, the concept of printability is often confusingly and, sometimes, conflictingly used in the literature. The objective of this perspective is to define the printability for extrusion bioprinting in terms of extrudability, filament fidelity, and structural integrity, as well as to review the effect of bioink properties, bioprinting process, and construct design on the printability. Challenges related to the printability of extrusion bioprinting are also discussed, along with recommendations for improvements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782 · cited 3×
“…[22], hierarchical machine learning [61] Bioprinting parameters In-process control Sensing and control system [90], control based on data-driven model [94] Sacrificial support framework Alginate impregnating on gelatin framework [95] Microgel: gelatin [98], gellan [109] Indirect bioprinting”
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528 · cited 2×
“The printed cell-incorporated constructs have found wide applications in tissue engineering [2], regenerative medicine [3], drug delivery [4], and building in vitro disease models for drug screening [5].”
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359 · cited 2×
“In addition, cells have been reported to interfere with the crosslinking process [43] and reduce the crosslinking efficiency of a HRP/H 2 O 2 -mediated enzymatic crosslinking [44].”
The bioink: A comprehensive review on bioprintable materials
Hospodiuk, M., Dey, M., Sosnoski, D., & Ozbolat, I. T. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.12.006 · Cited by 1,118 · cited 4×
“It is also desired for the print bed to have high surface roughness so that the first layer of printed construct can stick to the surface to maintain the overall structural integrity and stability [32].”
InfluentialOuyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
Self-citationBilliet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015 · cited 1×
“Various studies reported that the viscosity of bioinks decrease with cell density [10, 37–39].”
Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing
Kim, S. H., Yeon, Y. K., Lee, J. M., Chao, J. R., Lee, Y. J., Seo, Y. B., Sultan, M. T., Lee, O. J., Lee, J. S., Yoon, S.-I., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03759-y · Cited by 972
Paxton, N., Smolan, W., Böck, T., Melchels, F., Groll, J., & Jungst, T. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8dd8 · Cited by 950 · cited 2×
“For characterizing the shear thinning properties of bioinks, the power law model has been widely used, where the shear thinning behavior is represented by a power law index with a value less than 1 (smaller value, more profound shear thinning behavior) [26].”
Carbon-Nanotube-Embedded Hydrogel Sheets for Engineering Cardiac Constructs and Bioactuators
Shin, S. R., Jung, S. M., Zalabany, M., Kim, K., Zorlutuna, P., Kim, S. B., Nikkhah, M., Khabiry, M., Azize, M., Kong, J., et al. (2013) · ACS Nano · doi:10.1021/nn305559j · Cited by 946
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873 · cited 2×
“For example, alginate/diacrylated PEG (PEGDA) bioink can form a double-network hydrogel consisting of a Ca 2 + - crosslinked alginate network and photo-crosslinked PEGDA network, which possesses a toughness seven times higher than pure PEGDA hydrogel [83].”
A definition of bioinks and their distinction from biomaterial inks
Groll, J., Burdick, J. A., Cho, D.-W., Derby, B., Gelinsky, M., Heilshorn, S. C., Jüngst, T., Malda, J., Mironov, V. A., Nakayama, K., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aaec52 · Cited by 797 · cited 1×
“A bioink is a formulation of biomaterials, living cells, and/or other biologically active components and serves as delivery medium to transfer and protect living cells during the bioprinting process [1, 23].”
Self-citationStrategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712 · cited 4×
“It is also noted that the bioink viscoelasticity may also lead to the significant swelling of filament of bioink once extruded from the nozzle due to the deformation (or Barus effect) of elastic chains in the bioink [25], thus degrading the printability.”
InfluentialResearch on the printability of hydrogels in 3D bioprinting
He, Y., Yang, F., Zhao, H., Gao, Q., Xia, B., & Fu, J. (2016) · Scientific Reports · doi:10.1038/srep29977 · Cited by 654 · cited 9×
“By experiments, effort has been put to establish the relationship between printing parameters and printability [87], the relationship or interplay among the extrusion force, flow rate, and nozzle moving speed [88], and the appropriate range of bioink viscosity for printing [19].”
InfluentialA review on machine learning in 3D printing: applications, potential, and challenges
Goh, G. D., Sing, S. L., & Yeong, W. Y. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09876-9 · Cited by 652
Bio-ink properties and printability for extrusion printing living cells
Chung, J. H. Y., Naficy, S., Yue, Z., Kapsa, R., Quigley, A., Moulton, S. E., & Wallace, G. G. (2013) · Biomaterials Science · doi:10.1039/c3bm00012e · Cited by 610
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Self-citationYin, J., Yan, M., Wang, Y., Fu, J., & Suo, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16059 · Cited by 598
Chang, R., Nam, J., & Sun, W. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0004 · Cited by 549 · cited 1×
“Increasing the extrusion pressure leads to a higher flow rate and thicker filament but also increases the filament kinetic energy, which might cause jetting of less viscous bioinks due to Rayleigh-plateau instability [19, 47] as well as cell damage [1, 10, 48, 49].”
Self-citationOverview of Current Additive Manufacturing Technologies and Selected Applications
Horn, T. J., & Harrysson, O. L. A. (2012) · Science Progress · doi:10.3184/003685012x13420984463047 · Cited by 542
Three-dimensional printing of Hela cells for cervical tumor model in vitro
Zhao, Y., Yao, R., Ouyang, L., Ding, H., Zhang, T., Zhang, K., Cheng, S., & Sun, W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035001 · Cited by 534 · cited 2×
“Enzyme mediated crosslinking: Fibrinogen with thrombin [73], HA-TA and GH with HRP and H 2 O 2 [74] Nanocomposite bioink Nanosilicates [76], nanocellulose [77] Supramolecular-based bioinks Polypeptide-DNA [78], oxidized alginate with semicarbazone and hydrazone crosslinks [79] Shear thinning and…”
Self-citationOuyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 524 · cited 4×
“When applied with light exposure, a photo-crosslinkable bioink precursor can be solidified inside the nozzle and then extruded into a fine filament with high filament fidelity [18].”
InfluentialSelf-citationCharacterization of cell viability during bioprinting processes
Nair, K., Gandhi, M., Khalil, S., Yan, K. C., Marcolongo, M., Barbee, K., & Sun, W. (2009) · Biotechnology Journal · doi:10.1002/biot.200900004 · Cited by 510 · cited 1×
“Increasing the extrusion pressure leads to a higher flow rate and thicker filament but also increases the filament kinetic energy, which might cause jetting of less viscous bioinks due to Rayleigh-plateau instability [19, 47] as well as cell damage [1, 10, 48, 49].”
Self-citationGao, T., Gillispie, G. J., Copus, J. S., PR, A. K., Seol, Y.-J., Atala, A., Yoo, J. J., & Lee, S. J. (2018) · Biofabrication · doi:10.1088/1758-5090/aacdc7 · Cited by 510 · cited 3×
“…δ ), is correlated with the printability of bioinks [12, 14, 27]: a higher tan δ value for a bioink is associated with better filament fidelity and more uniform filaments with a smooth morphology while a lower tan δ value is related to the improved structural integrity of a printed construct [14].”
Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503 · cited 3×
“Nanoclay: laponite [13] Stepwise crosslinking Thermo-induced physical crosslinking of GelMA then followed by UV chemical crosslinking [55] Bioprinting process”
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495 · cited 1×
“…extrusion bioprinting highlights the need to thoroughly investigate into the influence of various disparate but closely related processing parameters, including extrusion pressure, nozzle travel speed, nozzle diameter and shape, temperature of the nozzle and print bed, and path height [1, 19, 46].”
Thermoresponsive hydrogels in biomedical applications
Klouda, L. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2015.05.017 · Cited by 491 · cited 1×
“…thermore-sponsive biomaterials such as gelatin, chitosan, cellulose, and N-isopropylacrylamide (NIPAAm)-based polymers, which undergo sol-gel transition at a certain temperature, accomplished through either lower critical solution temperature or upper critical solu-tion temperature mechanisms [58].”
Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461 · cited 1×
“Adding cells can also slow down crosslinking of bioinks such as collagen [38], thiolated hyaluronic/gelatin [41], and gelatin/alginate [42].”
Assessing bioink shape fidelity to aid material development in 3D bioprinting
Ribeiro, A., Blokzijl, M. M., Levato, R., Visser, C. W., Castilho, M., Hennink, W. E., Vermonden, T., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa90e2 · Cited by 448
3D printing of layered brain-like structures using peptide modified gellan gum substrates
Lozano, R., Stevens, L., Thompson, B. C., Gilmore, K. J., Gorkin, R., Stewart, E. M., in het Panhuis, M., Romero-Ortega, M., & Wallace, G. G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.07.022 · Cited by 445 · cited 2×
“Ionic crosslinking: alginate [70]; gellan [71] with Ca 2 +”
Direct‐write bioprinting three‐dimensional biohybrid systems for future regenerative therapies
Chang, C. C., Boland, E. D., Williams, S. K., & Hoying, J. B. (2011) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31831 · Cited by 445
Assessment methodologies for extrusion-based bioink printability
Gillispie, G., Prim, P., Copus, J., Fisher, J., Mikos, A. G., Yoo, J. J., Atala, A., & Lee, S. J. (2020) · Biofabrication · doi:10.1088/1758-5090/ab6f0d · Cited by 426 · cited 1×
“…and bioprinted constructs: (a) top view, illustrating the variation in filament cross-section with location and (b) cross-sectional view, illustrating the deflection of filaments and reduced pore size in the vertical direction as well as the reduced height of the whole construct. of view [9].”
Photocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step Bioprinting
Skardal, A., Zhang, J., McCoard, L., Xu, X., Oottamasathien, S., & Prestwich, G. D. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0798 · Cited by 424 · cited 1×
“photocrosslinking, enzyme mediated crosslinking) [102, 103] to generate gel-like extrudable bioinks.”
Li, C., Faulkner‐Jones, A., Dun, A. R., Jin, J., Chen, P., Xing, Y., Yang, Z., Li, Z., Shu, W., Liu, D., et al. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411383 · Cited by 423 · cited 2×
“Supramolecular bioinks with dynamic interactions (e.g. polypeptide-DNA conjugation and host–guest interactions) also possess shear-thinning characteristics and good printab-ility [72, 78].”
Ma, X., Liu, J., Zhu, W., Tang, M., Lawrence, N., Yu, C., Gou, M., & Chen, S. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.06.011 · Cited by 401 · cited 1×
“The printed cell-incorporated constructs have found wide applications in tissue engineering [2], regenerative medicine [3], drug delivery [4], and building in vitro disease models for drug screening [5].”
Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels
GhavamiNejad, A., Ashammakhi, N., Wu, X. Y., & Khademhosseini, A. (2020) · Small · doi:10.1002/smll.202002931 · Cited by 400 · cited 2×
“Postprinting crosslinking cures the construct after the filaments are deposited on the print bed, where crosslinking can be triggered by such factors as temperature, ions, pH value, light, enzymes, or a combination thereof [62].”
Three-dimensional bioprinting of complex cell laden alginate hydrogel structures
Tabriz, A. G., Hermida, M. A., Leslie, N. R., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045012 · Cited by 393
Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications
Müller, M., Öztürk, E., Arlov, Ø., Gatenholm, P., & Zenobi-Wong, M. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1704-5 · Cited by 389 · cited 1×
“Printing nozzle geometry also plays a role in the shear stress distribution in the nozzle; compared to a tapered needle, extrusion with a straight cylindrical nozzle induces higher shear stress inside the needle and requires a higher applied pressure to achieve the same flow rate [53–55].”
Transition from dripping to jetting
CLANET, C., & LASHERAS, J. C. (1999) · Journal of Fluid Mechanics · doi:10.1017/s0022112098004066 · Cited by 381 · cited 1×
“The second case is jetting, where the bioink is extruded into a stream of droplets due to inappropriate bioink surface tension and flow behavior [15, 16].”
Functional 3D Neural Mini‐Tissues from Printed Gel‐Based Bioink and Human Neural Stem Cells
Gu, Q., Tomaskovic‐Crook, E., Lozano, R., Chen, Y., Kapsa, R. M., Zhou, Q., Wallace, G. G., & Crook, J. M. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600095 · Cited by 376 · cited 1×
“In addition, it is worthwhile to note bioinks need to be prepared or formulated homogen-eously for improved printability [27, 28].”
3D-Printable Bioactivated Nanocellulose–Alginate Hydrogels
Leppiniemi, J., Lahtinen, P., Paajanen, A., Mahlberg, R., Metsä-Kortelainen, S., Pinomaa, T., Pajari, H., Vikholm-Lundin, I., Pursula, P., & Hytönen, V. P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02756 · Cited by 347 · cited 3×
“…mediated crosslinking: Fibrinogen with thrombin [73], HA-TA and GH with HRP and H 2 O 2 [74] Nanocomposite bioink Nanosilicates [76], nanocellulose [77] Supramolecular-based bioinks Polypeptide-DNA [78], oxidized alginate with semicarbazone and hydrazone crosslinks [79] Shear thinning and…”
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Khalil, S., & Sun, W. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3128729 · Cited by 337 · cited 2×
“Ionic crosslinking: alginate [70]; gellan [71] with Ca 2 +”
Self-citation3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel
Habib, A., Sathish, V., Mallik, S., & Khoda, B. (2018) · Materials · doi:10.3390/ma11030454 · Cited by 330 · cited 2×
“It has been illustrated that the path height may have a positive [19, 59], negative [47, 51, 60], or non-significant [50] impact on filament width, perhaps due to different bioink properties [22] and the cross-linking strategies adopted to solidify the bioink.”
Zhao, Y., Li, Y., Mao, S., Sun, W., & Yao, R. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045002 · Cited by 312 · cited 1×
“Adding cells can also slow down crosslinking of bioinks such as collagen [38], thiolated hyaluronic/gelatin [41], and gelatin/alginate [42].”
Self-citationBiomatrices and biomaterials for future developments of bioprinting and biofabrication
Nakamura, M., Iwanaga, S., Henmi, C., Arai, K., & Nishiyama, Y. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014110 · Cited by 311
VI.—The variation of surface tension with temperature and some related functions
Sugden, S. (1924) · J. Chem. Soc., Trans. · doi:10.1039/ct9242500032 · Cited by 297 · cited 1×
“As the temperature increases, the more active molecule movement can result in decreased viscosity [56] and surface tension [57], thus affecting the printability as discussed above.”
Wang, L. L., Highley, C. B., Yeh, Y., Galarraga, J. H., Uman, S., & Burdick, J. A. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36323 · Cited by 286
Viscosity–temperature correlation for liquids
Seeton, C. J. (2006) · Tribology Letters · doi:10.1007/s11249-006-9071-2 · Cited by 280
In situ bioprinting – Bioprinting from benchside to bedside?
Singh, S., Choudhury, D., Yu, F., Mironov, V., & Naing, M. W. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.08.045 · Cited by 273 · cited 1×
“Vision-based feed-back control were used on-line for bioprinting so as to imagine or monitor the bioink filament formed on the printing bed [90, 91]; the on-line images were then processed and the control actions were generated based on the difference between the imaged filament and desired one so…”
3D Bioprinting of Highly Thixotropic Alginate/Methylcellulose Hydrogel with Strong Interface Bonding
Li, H., Tan, Y. J., Leong, K. F., & Li, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04216 · Cited by 250 · cited 1×
“The ultimate shear stress increased significantly than the construct without TSC layer, indicating an improved interlayer bonding [ 86].”
Nanoengineered Ionic–Covalent Entanglement (NICE) Bioinks for 3D Bioprinting
Chimene, D., Peak, C. W., Gentry, J. L., Carrow, J. K., Cross, L. M., Mondragon, E., Cardoso, G. B., Kaunas, R., & Gaharwar, A. K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19808 · Cited by 248 · cited 2×
“Nanosilicates were able to introduce yield stress to uncrosslinked gelatin methacrylate (GelMA) and Kappa-Carrageenan (K-ca) network, and the printed constructs were dual crosslinked with both UV and ion after printing was complete [84].”
Zhai, X., Ma, Y., Hou, C., Gao, F., Zhang, Y., Ruan, C., Pan, H., Lu, W. W., & Liu, W. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00224 · Cited by 243 · cited 3×
“Enzyme mediated crosslinking: Fibrinogen with thrombin [73], HA-TA and GH with HRP and H 2 O 2 [74] Nanocomposite bioink Nanosilicates [76], nanocellulose [77] Supramolecular-based bioinks Polypeptide-DNA [78], oxidized alginate with semicarbazone and hydrazone crosslinks [79] Shear thinning and…”
Synthesis and Characterization of Types A and B Gelatin Methacryloyl for Bioink Applications
Lee, B., Lum, N., Seow, L., Lim, P., & Tan, L. (2016) · Materials · doi:10.3390/ma9100797 · Cited by 243
Guiding Lights: Tissue Bioprinting Using Photoactivated Materials
Lee, M., Rizzo, R., Surman, F., & Zenobi-Wong, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00077 · Cited by 239 · cited 1×
“…extrusion pressure, nozzle moving speed, nozzle size/shape, path height, and crosslinking strategies, along with the bioink properties (e.g. filament/layer fusion [19, 63], die swelling [25]) can all contributed to the printing resolution, which, nowadays, is in a range of 100–200 µ m [64].”
Biopolymer deposition for freeform fabrication of hydrogel tissue constructs
Khalil, S., & Sun, W. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.023 · Cited by 235 · cited 2×
“If its swelling is ignored, the bioink, once extruded from the nozzle, forms a cylindrical filament with a diameter ( D ) governed by the flow rate of bioink extruded ( Q ) and nozzle moving speed ( V ) [1, 20], i.e.”
Self-citationEvaluation of bioink printability for bioprinting applications
Zhang, Z., Jin, Y., Yin, J., Xu, C., Xiong, R., Christensen, K., Ringeisen, B. R., Chrisey, D. B., & Huang, Y. (2018) · Applied Physics Reviews · doi:10.1063/1.5053979 · Cited by 214 · cited 2×
“On the one hand, higher viscosity can enhance filament fidelity and structural integrity because a more viscous bioink, once printed, is more difficult to flow and spread, thus helping maintain the cylindrical shape of filament as well as the 3D structure printed [11].”
Self-citationA Perspective on Using Machine Learning in 3D Bioprinting
Yu, C., & Jiang, J. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v6i1.253 · Cited by 213 · cited 1×
“Recent advance in this regard includes integrating the machine learning into the bioprinting process to determine or optimize the process parameters [92, 93] and bioink formation [61], as well as to con-trol the in-process quality with improved printability [93, 94].”
Printability and Cell Viability in Bioprinting Alginate Dialdehyde-Gelatin Scaffolds
Soltan, N., Ning, L., Mohabatpour, F., Papagerakis, P., & Chen, X. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00167 · Cited by 204 · cited 5×
“…by various indexes that measure the difference between the extruded filament and its design, such as the uniformity of filament cross-section [12], the ratio of printed-filament width [21, 22] or height [22] over the diameter calculated from equation (1), or the pore size formed in the…”
InfluentialSelf-citationRecent advances in high-strength and elastic hydrogels for 3D printing in biomedical applications
Xu, C., Dai, G., & Hong, Y. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.032 · Cited by 190 · cited 2×
“Nanoma-terials including inorganic and metal/metal oxide nanomaterials have been physically blended or chemically conjugated with bioinks for mechanical reinforcement and good shape retention after printing [81].”
Self-citationStudy of Droplet Formation Process during Drop-on-Demand Inkjetting of Living Cell-Laden Bioink
Xu, C., Zhang, M., Huang, Y., Ogale, A., Fu, J., & Markwald, R. R. (2014) · Langmuir · doi:10.1021/la501430x · Cited by 184
Self-citationKim, M. H., Lee, Y. W., Jung, W.-K., Oh, J., & Nam, S. Y. (2019) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2019.06.014 · Cited by 175
Gleadall, A., Visscher, D., Yang, J., Thomas, D., & Segal, J. (2018) · Burns & Trauma · doi:10.1186/s41038-018-0121-4 · Cited by 172
Zhang, J., Wehrle, E., Adamek, P., Paul, G. R., Qin, X.-H., Rubert, M., & Müller, R. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.07.016 · Cited by 169 · cited 2×
“Further, increased cell density is reported to reduce surface tension [45] and enhance mechanical properties (e.g. compressive modulus) [35].”
Domingos, M. A. N., Intranuovo, F., Russo, T., Santis, R. D., Gloria, A., Ambrosio, L., Ciurana, J., & Bártolo, P. (2013) · Biofabrication · doi:10.1088/1758-5082/5/4/045004 · Cited by 168
Deep learning for fabrication and maturation of 3D bioprinted tissues and organs
Ng, W. L., Chan, A., Ong, Y. S., & Chua, C. K. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1771741 · Cited by 161
Resolution and shape in bioprinting: Strategizing towards complex tissue and organ printing
Lee, J. M., Ng, W. L., & Yeong, W. Y. (2019) · Applied Physics Reviews · doi:10.1063/1.5053909 · Cited by 161
Jin, Y., Chai, W., & Huang, Y. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.05.144 · Cited by 158
3D bioprinting of a hyaluronan bioink through enzymatic-and visible light-crosslinking
Petta, D., Armiento, A. R., Grijpma, D., Alini, M., Eglin, D., & D’Este, M. (2018) · Biofabrication · doi:10.1088/1758-5090/aadf58 · Cited by 158 · cited 1×
“In addition, cells have been reported to interfere with the crosslinking process [43] and reduce the crosslinking efficiency of a HRP/H 2 O 2 -mediated enzymatic crosslinking [44].”
Viscosity-Temperature Correlation for Liquids
Seeton, C. J. (2006) · doi:10.1115/ijtc2006-12139 · Cited by 153
Naghieh, S., Sarker, M., Sharma, N. K., Barhoumi, Z., & Chen, X. (2019) · Applied Sciences · doi:10.3390/app10010292 · Cited by 150 · cited 1×
“By experiments, effort has been put to establish the relationship between printing parameters and printability [87], the relationship or interplay among the extrusion force, flow rate, and nozzle moving speed [88], and the appropriate range of bioink viscosity for printing [19].”
Self-citationInfluence of Calcium Ions on Cell Survival and Proliferation in the Context of an Alginate Hydrogel
Cao, N., Chen, X. B., & Schreyer, D. J. (2012) · ISRN Chemical Engineering · doi:10.5402/2012/516461 · Cited by 142 · cited 1×
“And higher concentration alginate solution (4% (w/v)) is more affected by increasing cell densities than the lower concentration (2% (w/v)) [40].”
Self-citationTyrosinase-doped bioink for 3D bioprinting of living skin constructs
Shi, Y., Xing, T. L., Zhang, H. B., Yin, R. X., Yang, S. M., Wei, J., & Zhang, W. J. (2018) · Biomedical Materials · doi:10.1088/1748-605x/aaa5b6 · Cited by 141 · cited 1×
“One strategy is stepwise crosslinking, which is achieved by physical crosslinking (e.g. ionic crosslinking, thermoresponsive crosslinking) [55, 100, 101] or partial chemical crosslinking (e.g. photocrosslinking, enzyme mediated crosslinking) [102, 103] to generate gel-like extrudable bioinks.”
Li, M., Tian, X., Schreyer, D. J., & Chen, D. (2011) · Biotechnology Progress · doi:10.1002/btpr.679 · Cited by 138
Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting
Compaan, A. M., Song, K., & Huang, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13792 · Cited by 133
Simulations of 3D bioprinting: predicting bioprintability of nanofibrillar inks
Göhl, J., Markstedt, K., Mark, A., Håkansson, K., Gatenholm, P., & Edelvik, F. (2018) · Biofabrication · doi:10.1088/1758-5090/aac872 · Cited by 132 · cited 4×
“It has been illustrated that the path height may have a positive [19, 59], negative [47, 51, 60], or non-significant [50] impact on filament width, perhaps due to different bioink properties [22] and the cross-linking strategies adopted to solidify the bioink.”
InfluentialHighly Elastic Biodegradable Single-Network Hydrogel for Cell Printing
Xu, C., Lee, W., Dai, G., & Hong, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01294 · Cited by 129 · cited 2×
“Host–guest interaction: Ad-MeHA with CD-MeHA [72] Photo-crosslinking: methacrylated/acrylated collagen [75], PCL-PEG-PCL [67], gelatin [68], silk fibroin [69] Gelation mechanism (with a focus on kinetics)”
Self-citationHigh density cell seeding affects the rheology and printability of collagen bioinks
Diamantides, N., Dugopolski, C., Blahut, E., Kennedy, S., & Bonassar, L. J. (2019) · Biofabrication · doi:10.1088/1758-5090/ab3524 · Cited by 125 · cited 3×
“There are exceptions for solution state bioinks with decreased viscosity and modulus, probably because the viscosity and storage modulus of bioinks before mixing cells are greater or similar to the encapsulated cells [38].”
Optimization of Silicone 3D Printing with Hierarchical Machine Learning
Menon, A. K., Póczos, B., Feinberg, A. W., & Washburn, N. R. (2019) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2018.0088 · Cited by 118
Smith, C. M., Christian, J. J., Warren, W. L., & Williams, S. K. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0101 · Cited by 116
Hafeez, S., Ooi, H. W., Morgan, F. L. C., Mota, C., Dettin, M., van Blitterswijk, C., Moroni, L., & Baker, M. B. (2018) · Gels · doi:10.3390/gels4040085 · Cited by 114 · cited 2×
“…crosslinking: Fibrinogen with thrombin [73], HA-TA and GH with HRP and H 2 O 2 [74] Nanocomposite bioink Nanosilicates [76], nanocellulose [77] Supramolecular-based bioinks Polypeptide-DNA [78], oxidized alginate with semicarbazone and hydrazone crosslinks [79] Shear thinning and thixotropy”
Quantitative optimization of solid freeform deposition of aqueous hydrogels
Kang, K. H., Hockaday, L. A., & Butcher, J. T. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035001 · Cited by 110
Naghieh, S., Sarker, M. D., Abelseth, E., & Chen, X. (2019) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2019.02.014 · Cited by 109 · cited 2×
“…[22], hierarchical machine learning [61] Bioprinting parameters In-process control Sensing and control system [90], control based on data-driven model [94] Sacrificial support framework Alginate impregnating on gelatin framework [95] Microgel: gelatin [98], gellan [109] Indirect bioprinting”
Self-citationExtrusion Bioprinting of Scaffolds for Tissue Engineering Applications
Chen, D. X. B. (2019) · doi:10.1007/978-3-030-03460-3 · Cited by 101
Self-citationLee, J. W., Ahn, G., Kim, J. Y., & Cho, D. (2010) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-010-4173-7 · Cited by 96
A 3D Bioprinted Pseudo-Bone Drug Delivery Scaffold for Bone Tissue Engineering
Kondiah, P. J., Kondiah, P. P. D., Choonara, Y. E., Marimuthu, T., & Pillay, V. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12020166 · Cited by 89
Castilho, M., Levato, R., Bernal, P. N., de Ruijter, M., Sheng, C. Y., van Duijn, J., Piluso, S., Ito, K., & Malda, J. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.0c01577 · Cited by 85 · cited 1×
“In this method, electrical-assisted material deposition principals are employed along with microscale printing of photo-cross-linkable bioinks [99].”
Colosi, C., Costantini, M., Latini, R., Ciccarelli, S., Stampella, A., Barbetta, A., Massimi, M., Devirgiliis, L. C., & Dentini, M. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00732h · Cited by 79 · cited 2×
“Coaxial nozzles [104] or multi-nozzle deposition [105] have been used to simultaneously crosslink bioinks by separately printing the bioink precursor and crosslinking medium so they join at the nozzle exit and rapidly crosslink.”
A perspective on 3D bioprinting in tissue regeneration
Ahadian, S., & Khademhosseini, A. (2018) · Bio-Design and Manufacturing · doi:10.1007/s42242-018-0020-3 · Cited by 76 · cited 1×
“There is still much research space to develop bioprinting techniques and suitable bioinks for improved printability and cell viability, meanwhile having a high printing resolution [66].”
Drzewiecki, K. E., Malavade, J. N., Ahmed, I., Lowe, C. J., & Shreiber, D. I. (2017) · TECHNOLOGY · doi:10.1142/s2339547817500091 · Cited by 74
Direct process feedback in extrusion-based 3D bioprinting
Armstrong, A. A., Norato, J. A., Alleyne, A. G., & Johnson, A. J. W. (2019) · Biofabrication · doi:10.1088/1758-5090/ab4d97 · Cited by 66
Study of extrudability and standoff distance effect during nanoclay-enabled direct printing
Jin, Y., Zhao, D., & Huang, Y. H. (2018) · Bio-Design and Manufacturing · doi:10.1007/s42242-018-0009-y · Cited by 65 · cited 2×
“It has been illustrated that the path height may have a positive [19, 59], negative [47, 51, 60], or non-significant [50] impact on filament width, perhaps due to different bioink properties [22] and the cross-linking strategies adopted to solidify the bioink.”
Bioprinting and Cellular Therapies for Type 1 Diabetes
Ravnic, D. J., Leberfinger, A. N., & Ozbolat, I. T. (2017) · Trends in biotechnology · doi:10.1016/j.tibtech.2017.07.006 · Cited by 62
Cell encapsulation in gelatin bioink impairs 3D bioprinting resolution
Schwartz, R., Malpica, M., Thompson, G. L., & Miri, A. K. (2020) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2019.103524 · Cited by 61 · cited 1×
“Various studies reported that the viscosity of bioinks decrease with cell density [10, 37–39].”
Fabrication of cell-laden three-dimensional alginate-scaffolds with an aerosol cross-linking process
Ahn, S., Lee, H., Puetzer, J. L., Bonassar, L. J., & Kim, G. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33749e · Cited by 58 · cited 2×
“In situ rapid crosslinking Coaxial nozzle [104], light permeable tube [18], crosslinker environment [107, 108]”
Effects of Fluid Properties on Dispensing Processes for Electronics Packaging
Chen, D., & Ke, H. (2006) · IEEE Transactions on Electronics Packaging Manufacturing · doi:10.1109/tepm.2006.874964 · Cited by 57 · cited 1×
“On one hand, a large surface tension is responsible for the formation of droplets or attachment to the nozzle tip in printing [32]; on the other hand, once deposited on the platform, the large surface tension can help retain the filament shape or profile [33, 34].”
Sakai, S., Mochizuki, K., Qu, Y., Mail, M., Nakahata, M., & Taya, M. (2018) · Biofabrication · doi:10.1088/1758-5090/aadc9e · Cited by 55 · cited 2×
“In situ rapid crosslinking Coaxial nozzle [104], light permeable tube [18], crosslinker environment [107, 108]”
Chen, Y., Wang, Y., Yang, Q., Liao, Y., Zhu, B., Zhao, G., Shen, R., Lu, X., & Qu, S. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb01196f · Cited by 53 · cited 1×
“Thixotropic bioinks have both shear thinning and time-dependent recovery of viscosity after printing [24], and the time-dependence of viscosity is one reason responsible for the inhomogeneity of printed filament [25].”
Armstrong, A. A., Pfeil, A. A., Alleyne, A. G., & Johnson, A. J. W. (2021) · Bioprinting · doi:10.1016/j.bprint.2020.e00126 · Cited by 52
Gravity and Surface Tension Effects on the Shape Change of Soft Materials
Xu, X., Jagota, A., Peng, S., Luo, D., Wu, M., & Hui, C. (2013) · Langmuir · doi:10.1021/la400921h · Cited by 48 · cited 1×
“On one hand, a large surface tension is responsible for the formation of droplets or attachment to the nozzle tip in printing [32]; on the other hand, once deposited on the platform, the large surface tension can help retain the filament shape or profile [33, 34].”
Biofabrication for osteochondral tissue regeneration: bioink printability requirements
Abdulghani, S., & Morouço, P. (2019) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-019-6218-x · Cited by 48 · cited 2×
“Hydrogel swelling also affects the printability as it determines the final shape and size of the oriented constructs [30].”
Alruwaili, M., López, J. A., McCarthy, K., Reynaud, E. G., & Rodriguez, B. J. (2019) · Bio-Design and Manufacturing · doi:10.1007/s42242-019-00043-w · Cited by 48 · cited 1×
“It has been illustrated that the path height may have a positive [19, 59], negative [47, 51, 60], or non-significant [50] impact on filament width, perhaps due to different bioink properties [22] and the cross-linking strategies adopted to solidify the bioink.”
Microextrusion Based 3D Printing – A Review
Udofia, E. N., & Zhou, W. (2018) · doi:10.26153/tsw/17201 · Cited by 46
Maisonneuve, B. G. C., Roux, D. C. D., Thorn, P., & Cooper-White, J. J. (2013) · Biomacromolecules · doi:10.1021/bm401335g · Cited by 46
Thi, P. L., Son, J. Y., Lee, Y., Ryu, S. B., Park, K. M., & Park, K. D. (2020) · Macromolecular Research · doi:10.1007/s13233-020-8052-x · Cited by 45
Freeze-FRESH: A 3D Printing Technique to Produce Biomaterial Scaffolds with Hierarchical Porosity
Wang, Z., & Florczyk, S. J. (2020) · Materials · doi:10.3390/ma13020354 · Cited by 43 · cited 1×
“Another innovative bioprinting strategy is to deposit the bioink into a supporting material, which possess the elastic solid properties at rest to hold the printed filament in place, while rapidly liquefy as the nozzle moves within it [13, 96, 97].”
Liu, Y., Hamid, Q., Snyder, J., Wang, C., & Sun, W. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2015-0090 · Cited by 36 · cited 1×
“Coaxial nozzles [104] or multi-nozzle deposition [105] have been used to simultaneously crosslink bioinks by separately printing the bioink precursor and crosslinking medium so they join at the nozzle exit and rapidly crosslink.”
Self-citationSedimentation study of bioink containing living cells
Xu, H., Zhang, Z., & Xu, C. (2019) · Journal of Applied Physics · doi:10.1063/1.5089245 · Cited by 34 · cited 1×
“In addition, the size of cells and aggregates, as well as their inhomogeneous distribution may clog the nozzle or generate inconsistent filaments [65], thus limiting the printing resolution.”
Self-citationHiller, A., Borchers, K., Tovar, G. E. M., & Southan, A. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.10.008 · Cited by 23 · cited 1×
“Whereas crosslinking each single layer separately during printing can lead to good structural integrity but less interlayer adhesion [85].”
Cited by
Zhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lutolf, M., McAlpine, M. C., Yeong, W. Y., Zenobi-Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 391
Biomaterials / bioinks and extrusion bioprinting
Chen, X. B., Fazel Anvari-Yazdi, A., Duan, X., Zimmerling, A., Gharraei, R., Sharma, N. K., Sweilem, S., & Ning, L. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.06.006 · Cited by 244
In situ 3D bioprinting: a promising technique in advanced biofabrication strategies
Mahmoudi, Z., Sedighi, M., Jafari, A., Naghieh, S., Stefanek, E., Akbari, M., & Savoji, H. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00260 · Cited by 38
Self-citation
Metadata
- Authors
- Fu, Z., Naghieh, S., Xu, C., Wang, C., Sun, W., & Chen, X.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2021-04-08
- Volume
- 13
- Issue
- 3
- Pages
- 033001
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W3132994358
- Cited by
- 196
- References
- 108
- FWCI
- 8.12
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.