The tension of metallic films deposited by electrolysis
Open accessThe DOI matches its Crossref record.
Abstract
It is well known that metallic films deposited electrolytically are in many cases liable to peel off if deposited to any considerable thickness. This is the case with nickel which, when deposited over a certain thickness, will curl up into beautiful close rolls, especially if it does not adhere very tightly to the body on which it is deposited. For example, if a piece of glass is silvered by any of the usual silvering solutions, and then nickel is deposited on the silver, it is found that the nickel and silver peel off the glass in close tight rolls almost at once. In ‘Practical Electro-Chemistry,' by Bertram Blount, reference is made on pp. 114 and 272 to the tendency of nickel to peel off, and it is stated that it “will peel—spontaneously and without assignable cause” (p. 272), but that a thick coating can be obtained by keeping the solution at between 50° and 90°C. The late Earl of Rosse tried, about 1865, to make flat mirrors by coating glass with silver chemically, and then electroplating with copper; but he found that, owing to the “contraction” of the copper film, it became detached from the glass. I have had the' same experience in protecting silver 61ms in searchlight reflectors by a film of electro-deposited copper, it being found that if the film of copper is more than 0.01 mm. thick peeling is apt to take place.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Yu, Z., Duan, Y., Feng, X., Yu, X., Gao, M., & Yu, S. (2021) · Advanced Materials · doi:10.1002/adma.202007100 · Cited by 1,947
Wang, M., Jiang, C., Zhang, S., Song, X., Tang, Y., & Cheng, H.-M. (2018) · Nature Chemistry · doi:10.1038/s41557-018-0045-4 · Cited by 1,594
Porous Anodic Aluminum Oxide: Anodization and Templated Synthesis of Functional Nanostructures
Lee, W., & Park, S.-J. (2014) · Chemical Reviews · doi:10.1021/cr500002z · Cited by 1,383
Cantilever transducers as a platform for chemical and biological sensors
Lavrik, N. V., Sepaniak, M. J., & Datskos, P. G. (2004) · Review of Scientific Instruments · doi:10.1063/1.1763252 · Cited by 1,117
Anion-Exchange Membrane Water Electrolyzers
Du, N., Roy, C., Peach, R., Turnbull, M., Thiele, S., & Bock, C. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00854 · Cited by 1,075
Comparative advantages of mechanical biosensors
Arlett, J. L., Myers, E. B., & Roukes, M. L. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.44 · Cited by 966
A mini review on nickel-based electrocatalysts for alkaline hydrogen evolution reaction
Gong, M., Wang, D.-Y., Chen, C.-C., Hwang, B.-J., & Dai, H. (2016) · Nano Research · doi:10.1007/s12274-015-0965-x · Cited by 953
Review Article: Stress in thin films and coatings: Current status, challenges, and prospects
Abadias, G., Chason, E., Keckes, J., Sebastiani, M., Thompson, G. B., Barthel, E., Doll, G. L., Murray, C. E., Stoessel, C. H., & Martinu, L. (2018) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.5011790 · Cited by 858
Wang, G., McCain, M. L., Yang, L., He, A., Pasqualini, F. S., Agarwal, A., Yuan, H., Jiang, D., Zhang, D., Zangi, L., et al. (2014) · Nature Medicine · doi:10.1038/nm.3545 · Cited by 837
MEMS power generator with transverse mode thin film PZT
Jeon, Y. B., Sood, R., Jeong, J.-H., & Kim, S.-G. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.032 · Cited by 795
Micromechanical cantilever-based biosensors
Raiteri, R., Grattarola, M., Butt, H.-J., & Skládal, P. (2001) · Sensors and Actuators B: Chemical · doi:10.1016/s0925-4005(01)00856-5 · Cited by 734
Deformation and stress in electrode materials for Li-ion batteries
Mukhopadhyay, A., & Sheldon, B. W. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.02.001 · Cited by 724
Janssen, G. C. A. M., Abdalla, M. M., van Keulen, F., Pujada, B. R., & van Venrooy, B. (2009) · Thin Solid Films · doi:10.1016/j.tsf.2008.07.014 · Cited by 710
Micro- and nanomechanical sensors for environmental, chemical, and biological detection
Waggoner, P. S., & Craighead, H. G. (2007) · Lab on a Chip · doi:10.1039/b707401h · Cited by 678
Fu, Y. Q., Luo, J. K., Nguyen, N. T., Walton, A. J., Flewitt, A. J., Zu, X. T., Li, Y., McHale, G., Matthews, A., Iborra, E., et al. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.006 · Cited by 646
Sethuraman, V. A., Chon, M. J., Shimshak, M., Srinivasan, V., & Guduru, P. R. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.02.013 · Cited by 626
An overview of residual stresses in metal powder bed fusion
Bartlett, J. L., & Li, X. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.02.020 · Cited by 616
McKendry, R., Zhang, J., Arntz, Y., Strunz, T., Hegner, M., Lang, H. P., Baller, M. K., Certa, U., Meyer, E., Güntherodt, H.-J., et al. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.152330199 · Cited by 598
Attogram detection using nanoelectromechanical oscillators
Ilic, B., Craighead, H. G., Krylov, S., Senaratne, W., Ober, C., & Neuzil, P. (2004) · Journal of Applied Physics · doi:10.1063/1.1650542 · Cited by 585
Cantilever-like micromechanical sensors
Boisen, A., Dohn, S., Keller, S. S., Schmid, S., & Tenje, M. (2011) · Reports on Progress in Physics · doi:10.1088/0034-4885/74/3/036101 · Cited by 566
Bendable Inorganic Thin-Film Battery for Fully Flexible Electronic Systems
Koo, M., Park, K.-I., Lee, S. H., Suh, M., Jeon, D. Y., Choi, J. W., Kang, K., & Lee, K. J. (2012) · Nano Letters · doi:10.1021/nl302254v · Cited by 558
Surface Stress in the Self-Assembly of Alkanethiols on Gold
Berger, R., Delamarche, E., Lang, H. P., Gerber, C., Gimzewski, J. K., Meyer, E., & Güntherodt, H.-J. (1997) · Science · doi:10.1126/science.276.5321.2021 · Cited by 544
Durability of nanosized oxygen-barrier coatings on polymers
Leterrier, Y. (2003) · Progress in Materials Science · doi:10.1016/s0079-6425(02)00002-6 · Cited by 509
Eom, K., Park, H. S., Yoon, D. S., & Kwon, T. (2011) · Physics Reports · doi:10.1016/j.physrep.2011.03.002 · Cited by 464
Shape-Morphing Materials from Stimuli-Responsive Hydrogel Hybrids
Jeon, S.-J., Hauser, A. W., & Hayward, R. C. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00570 · Cited by 464
The intrinsic stress of polycrystalline and epitaxial thin metal films
Koch, R. (1994) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/6/45/005 · Cited by 451
DNA sequence–directed shape change of photopatterned hydrogels via high-degree swelling
Cangialosi, A., Yoon, C., Liu, J., Huang, Q., Guo, J., Nguyen, T. D., Gracias, D. H., & Schulman, R. (2017) · Science · doi:10.1126/science.aan3925 · Cited by 442
Origin of nanomechanical cantilever motion generated from biomolecular interactions
Wu, G., Ji, H., Hansen, K., Thundat, T., Datar, R., Cote, R., Hagan, M. F., Chakraborty, A. K., & Majumdar, A. (2001) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.98.4.1560 · Cited by 415
Measurement of Strains at Si-SiO2 Interface
Jaccodine, R. J., & Schlegel, W. A. (1966) · Journal of Applied Physics · doi:10.1063/1.1708831 · Cited by 406
Extreme ultraviolet lithography: A review
Wu, B., & Kumar, A. (2007) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.2794048 · Cited by 400
Bio-inspired soft robotics: Material selection, actuation, and design
Coyle, S., Majidi, C., LeDuc, P., & Hsia, K. J. (2018) · Extreme Mechanics Letters · doi:10.1016/j.eml.2018.05.003 · Cited by 400
Low Dielectric Constant Materials for ULSI Interconnects
Morgen, M., Ryan, E. T., Zhao, J.-H., Hu, C., Cho, T., & Ho, P. S. (2000) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.30.1.645 · Cited by 394
Biosensors based on nanomechanical systems
Tamayo, J., Kosaka, P. M., Ruz, J. J., San Paulo, Á., & Calleja, M. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35293a · Cited by 391
Townsend, P. H., Barnett, D. M., & Brunner, T. A. (1987) · Journal of Applied Physics · doi:10.1063/1.339082 · Cited by 374
In Situ Measurements of Stress-Potential Coupling in Lithiated Silicon
Sethuraman, V. A., Srinivasan, V., Bower, A. F., & Guduru, P. R. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3489378 · Cited by 364
Floro, J. A., Hearne, S. J., Hunter, J. A., Kotula, P., Chason, E., Seel, S. C., & Thompson, C. V. (2001) · Journal of Applied Physics · doi:10.1063/1.1352563 · Cited by 357
Microcantilevers: Sensing Chemical Interactions via Mechanical Motion
Goeders, K. M., Colton, J. S., & Bottomley, L. A. (2008) · Chemical Reviews · doi:10.1021/cr0681041 · Cited by 351
Surface stress effect in mechanics of nanostructured materials
Wang, J., Huang, Z., Duan, H., Yu, S., Feng, X., Wang, G., Zhang, W., & Wang, T. (2011) · Acta Mechanica Solida Sinica · doi:10.1016/s0894-9166(11)60009-8 · Cited by 349
Review Article: Tracing the recorded history of thin-film sputter deposition: From the 1800s to 2017
Greene, J. E. (2017) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.4998940 · Cited by 343
Modeling of elastic deformation of multilayers due to residual stresses and external bending
Hsueh, C.-H. (2002) · Journal of Applied Physics · doi:10.1063/1.1478137 · Cited by 338
Physical Origins of Intrinsic Stresses in Volmer–Weber Thin Films
Floro, J. A., Chason, E., Cammarata, R. C., & Srolovitz, D. J. (2002) · MRS Bulletin · doi:10.1557/mrs2002.15 · Cited by 311
Rapid and label-free nanomechanical detection of biomarker transcripts in human RNA
Zhang, J., Lang, H. P., Huber, F., Bietsch, A., Grange, W., Certa, U., Mckendry, R., Güntherodt, H.-J., Hegner, M., & Gerber, C. (2006) · Nature Nanotechnology · doi:10.1038/nnano.2006.134 · Cited by 303
GaN-based diodes and transistors for chemical, gas, biological and pressure sensing
Pearton, S. J., Kang, B. S., Kim, S., Ren, F., Gila, B. P., Abernathy, C. R., Lin, J., & Chu, S. N. G. (2004) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/16/29/r02 · Cited by 299
Self-folding polymeric containers for encapsulation and delivery of drugs
Fernandes, R., & Gracias, D. H. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.02.012 · Cited by 285
Metallic molybdenum disulfide nanosheet-based electrochemical actuators
Acerce, M., Akdoğan, E. K., & Chhowalla, M. (2017) · Nature · doi:10.1038/nature23668 · Cited by 280
Wee, K. W., Kang, G. Y., Park, J., Kang, J. Y., Yoon, D. S., Park, J. H., & Kim, T. S. (2005) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2004.09.023 · Cited by 272
Keller, R.-M., Baker, S. P., & Arzt, E. (1998) · Journal of Materials Research · doi:10.1557/jmr.1998.0186 · Cited by 259
Stress and strain in polycrystalline thin films
Janssen, G. C. A. M. (2007) · Thin Solid Films · doi:10.1016/j.tsf.2007.03.007 · Cited by 253
Amorphous silicon carbide ultramicroelectrode arrays for neural stimulation and recording
Deku, F., Cohen, Y., Joshi-Imre, A., Kanneganti, A., Gardner, T. J., & Cogan, S. F. (2018) · Journal of Neural Engineering · doi:10.1088/1741-2552/aa8f8b · Cited by 89
AlN-based flexible piezoelectric skin for energy harvesting from human motion
Guido, F., Qualtieri, A., Algieri, L., Lemma, E. D., De Vittorio, M., & Todaro, M. T. (2016) · Microelectronic Engineering · doi:10.1016/j.mee.2016.03.041 · Cited by 83
THERMODYNAMICS OF NUCLEATION AND GROWTH
TROMP, R. M., & HANNON, J. B. (2002) · Surface Review and Letters · doi:10.1142/s0218625x02003846 · Cited by 80
Optical Properties and Mechanical Stress in SiO2/Nb2O5 Multilayers
Richter, F., Kupfer, H., Schlott, P., Gessner, T., & Kaufmann, C. (2001) · Thin Solid Films · doi:10.1016/s0040-6090(01)00864-1 · Cited by 73
Levi, K., Kwan, A., Rhines, A. S., Gorcea, M., Moore, D. J., & Dauskardt, R. H. (2010) · British Journal of Dermatology · doi:10.1111/j.1365-2133.2010.09937.x · Cited by 41
Interface and Defects Engineering for Multilayer Laser Coatings
Dong, S., Jiao, H., Wang, Z., Zhang, J., & Cheng, X. (2022) · Progress in Surface Science · doi:10.1016/j.progsurf.2022.100663 · Cited by 30
Tissue/Organ Adaptable Bioelectronic Silk‐Based Implants
Zhu, Z., Yan, Z., Ni, S., Yang, H., Xie, Y., Wang, X., Zou, D., Tao, C., Jiang, W., Jiang, J., et al. (2024) · Advanced Materials · doi:10.1002/adma.202405892 · Cited by 27
Stress and Refractive Index Control of SiO2 Thin Films for Suspended Waveguides
Wostbrock, N., & Busani, T. (2020) · Nanomaterials · doi:10.3390/nano10112105 · Cited by 12
Stress Evaluation of Chemical Vapor Deposited Silicon Dioxide Films
Maeda, M., & Itsumi, M. (2002) · Physica B: Condensed Matter · doi:10.1016/s0921-4526(02)01291-7 · Cited by 3
Metadata
- Authors
- Stoney, G. G.
- Venue
- Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character
- Publisher
- The Royal Society
- Published
- 1909-05-06
- Volume
- 82
- Issue
- 553
- Pages
- 172-175
- ISSN
- 0950-1207 (ISSN-L)
- 2053-9150
- OpenAlex
- W2066874036
- Cited by
- 4,872
- References
- 0
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.