The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index; 17 of the 62 sources its claims cite were checked for support.
A Review of Cybersecurity Guidelines for Manufacturing Factories in Industry 4.0
Open accessAbstract
Industry 4.0 is a revolution in manufacturing by introducing disruptive technologies such as Internet of Things (IoT) and cloud-computing into the heart of the factory. The resulting increased automation and the improved production synergy between stocks, supply chains and customer demands, come along with the threats and attacks from the Internet. Despite extensive literature on the cybersecurity topic, many actors in manufacturing factories are just realizing the impact of cybersecurity in the preservation of their business. This paper introduces step-by-step the concepts and practical aspects of an Industry 4.0 manufacturing factory that are related to cybersecurity. Based on a subdivision of a typical factory into several generic perimeters, we present the vulnerabilities and threats regarding the network and devices usually found in each perimeter. Therefore, it is more efficient to present the recent proposals of the literature regarding cybersecurity guidelines and solutions in Industry 4.0. Instead of spreading a lot of references regarding every aspect of cybersecurity, we focused on a limited number of papers among the recent references. However, for each paper, we provide the details about the purpose of the proposal, the methodology adopted, the technical solution developed and its evaluation by the authors. These solutions range from classical cybersecurity countermeasures to innovative ones, such as those based on honeypots and digital twins. In order to deliver…
Overview
CoChat Summary
TL;DR
This paper reviews cybersecurity concepts, threats, solutions, and guidelines for Industry 4.0 manufacturing factories, organizing a typical factory into six generic perimeters and linking vulnerabilities and threats to business impacts. It synthesizes selected literature and official guidance from ISO/IEC, NIST, ENISA, and ANSSI into step-by-step cybersecurity guidelines.
Key findings
- The paper proposes six factory perimeters—manufacturing-production, logistics, active supervision, research and development, living area, and external areas—and characterizes their equipment, interactions, access control, monitoring, and network access.
- It reports business impacts from major attacks: NotPetya spread to 65 countries and caused USD892 million in damages; WannaCry spread to 150 countries and caused USD8 billion in damages. It also cites that ICS vulnerabilities rose from 2 to 189 from 1997 to 2015, that 45% of all attacks in 2015 focused on unauthorized access (IBM X-Force), and that the average time to identify a data breach was 197 days (Ponemon Institute/IBM, 2018).
- It reviews cybersecurity solutions ranging from classical countermeasures to innovative approaches such as honeypots and digital twins, including an SDN firewall for MES, an ontology-based IoT cybersecurity framework, direct-to-machine/MSED, ensemble intelligence with the NNO algorithm trained/tested on the CUP99 dataset, and behavioral models with critical-state distance.
- For Industry 4.0, it states the lowest acceptable NIST framework implementation tier would be level 3 (“Repeatable”), while level 4 (“Adaptive”) is the optimal objective; it also notes that only 16% of companies are ready to face cybersecurity challenges.
Methods
- Qualitative literature review and guideline synthesis; no primary data collection, experiment, or systematic search protocol is described.
- The factory is subdivided into six generic perimeters, and for each perimeter the paper reports vulnerabilities, threats, risks, and business impacts, then reviews selected cybersecurity solutions and countermeasures.
- The review focuses on a limited number of recent papers and official standards/guidelines from ISO/IEC, NIST, ENISA, and ANSSI; for each selected solution, it reports the purpose, methodology, technical solution, and the authors’ evaluation.
Limitations
- Stated: the paper focuses on a limited number of papers among recent references rather than spreading many references across every aspect; some analyzed papers did not always mention managerial aspects or business impacts; ANSSI tables lack some IoT and smart manufacturing measures; open issues remain before obtaining a multi-layered cybersecurity intelligence ontology.
- Evident: as a review, it does not independently validate or comparatively benchmark the reviewed solutions; reported solution outcomes rely on the original authors’ evaluations.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
17 Valid · 2 Not valid · 42 Not checked · 56 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“Due to smart and connected business processes, industry 4.0 is vulnerable to cyber espionage.”
§ A Review of Cybersecurity Guidelines for Manufacturing Factories in Industry 4.0 > C. MAJOR SECURITY THREATS IN INDUSTRY 4.0
What the sources say
- Supportedcites [20] 20. T. Pereira, L. Barreto, and A. Amaral, ''Network and information security challenges within industry 4.0 paradigm,'' Procedia Manuf., vol. 13, pp. 1253-1260, Jun. 2017. [Online]. Available: http://www. sciencedirect.com/science/article/pii/S2351978917306820 source
The Enterprise Cyber-Espionage section explicitly says Industry 4.0 is more vulnerable to cyber-espionage because of smart and connected business processes. This directly supports the citing sentence. (LLM, conf=0.95)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Well organized groups of cyber criminals have made industry 4.0 their favourite target to steal sensitive information and intellectual property.”
§ A Review of Cybersecurity Guidelines for Manufacturing Factories in Industry 4.0 > C. MAJOR SECURITY THREATS IN INDUSTRY 4.0
What the sources say
- Partly supportedcites [20] 20. T. Pereira, L. Barreto, and A. Amaral, ''Network and information security challenges within industry 4.0 paradigm,'' Procedia Manuf., vol. 13, pp. 1253-1260, Jun. 2017. [Online]. Available: http://www. sciencedirect.com/science/article/pii/S2351978917306820 sourceExperimental — accuracy not yet measured
The 'Enterprise Cyber-Espionage, Confidential Information and Intellectual Property' section (page unavailable) says well-organized cybercriminal groups target specific industries to steal sensitive information and intellectual property. It says Industry 4.0 is more vulnerable to cyber-espionage, but does not say it is those groups’ favourite target. (LLM, conf=0.88)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“In industry 4.0, the cooperation of multiple partners, such as suppliers in the network, makes the task easier for these criminals as their attacks can have many pathways and spread very fast.”
§ A Review of Cybersecurity Guidelines for Manufacturing Factories in Industry 4.0 > C. MAJOR SECURITY THREATS IN INDUSTRY 4.0
What the sources say
- Partly supportedcites [20] 20. T. Pereira, L. Barreto, and A. Amaral, ''Network and information security challenges within industry 4.0 paradigm,'' Procedia Manuf., vol. 13, pp. 1253-1260, Jun. 2017. [Online]. Available: http://www. sciencedirect.com/science/article/pii/S2351978917306820 sourceExperimental — accuracy not yet measured
The “Supply Chain and the Extended Systems” section says attackers can exploit supplier vulnerabilities and that a vulnerability can reach other organizational processes through dependent actors. The “Enterprise Cyber-Espionage” section also links heightened threats to cooperation among network partners. Neither passage establishes that attacks spread very fast or have many pathways; page numbers are not available in our copy. (LLM, conf=0.84)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“The theft of corporate and product data is becoming very common, especially the software and functionalities that are easy to copy.”
§ A Review of Cybersecurity Guidelines for Manufacturing Factories in Industry 4.0 > C. MAJOR SECURITY THREATS IN INDUSTRY 4.0
What the sources say
- Supportedcites [20] 20. T. Pereira, L. Barreto, and A. Amaral, ''Network and information security challenges within industry 4.0 paradigm,'' Procedia Manuf., vol. 13, pp. 1253-1260, Jun. 2017. [Online]. Available: http://www. sciencedirect.com/science/article/pii/S2351978917306820 source
The “Enterprise Cyber-Espionage, Confidential Information and Intellectual Property” section (page not supplied) says that targeted theft of corporate and product know-how is becoming increasingly common, especially software and functionalities that are easy to copy. This supports the citing sentence’s paraphrase. (LLM, conf=0.91)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“As it was established by [35], the threats exposed in additive manufacturing stretch across digital manufacturing devices of all shapes and sizes.”
§ A Review of Cybersecurity Guidelines for Manufacturing Factories in Industry 4.0 > 4) DIRECT-TO-MACHINE APPROACH FOR CYBERSECURITY IN CYBER-PHYSICAL SYSTEMS a: PURPOSE
What the sources say
- Supportedcites [35] 35. Y. Pan, J. White, D. Schmidt, A. Elhabashy, L. Sturm, J. Camelio, and C. Williams, ''Taxonomies for reasoning about cyber-physical attacks in IoT-based manufacturing systems,'' Int. J. Interact. Multimedia Artif. Intell., vol. 4, pp. 45-54, Mar. 2017. source
Section II.B 'Design Artifacts to Code' states that in IoT-based manufacturing 'each component of these process chains are linked through the IoT infrastructure, which poses potential risks of external cyber-physical attacks,' and demonstrates this for additive manufacturing (CAD/STL file, toolpath generation, 3D printer controllers across a network, remote printing/monitoring). The taxonomy (Section II.C) likewise enumerates attack targets spanning products, IoT machines and intellectual property such as CAD files, and Table I maps attack types onto processes, with 3D printing 'vulnerable to many kinds of attacks'; the Case study adds computers controlling the 3D printer and inspection station. The one caveat is scope: the paper concentrates on additive and subtractive processes as 'representatives of a larger group,' so 'all shapes and sizes' is a figurative generalization rather than an exhaustive survey, but the attributed point — that additive-manufacturing threats stretch across the digital manufacturing devices in the chain — is stated in our copy. (LLM, conf=0.80)
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
23 more claims · 2 with their cited sources checked
Create a free account to see all 117 claims and to verify the 3 references still open.
- It may state two separate claims as one. 38
- Probably not a substantial claim. 72
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ A Review of Cybersecurity Guidelines for Manufacturing Factories in Industry 4.0 > b: FRAMEWORK IMPLEMENTATION TIERS
“Finally, at level 4 (''Adaptive''), they switch from a reactive approach to an active one”
§ A Review of Cybersecurity Guidelines for Manufacturing Factories in Industry 4.0 > b: FRAMEWORK IMPLEMENTATION TIERS
“level 4 (''Adaptable'') is the optimal objective”
Citations
Cites
Lin, J., Yu, W., Zhang, N., Yang, X., Zhang, H., & Zhao, W. (2017) · IEEE Internet of Things Journal · doi:10.1109/jiot.2017.2683200 · Cited by 2,793 · cited 1×
“The main drawback which impedes their complete adoption is their weaknesses regarding cybersecurity, which is due to the heterogeneous connectivity and resulting threats (privacy violation, etc.), and may bring about major consequences to IoT technology users [30].”
BackgroundA Survey of Software-Defined Networking: Past, Present, and Future of Programmable Networks
Nunes, B. A. A., Mendonca, M., Nguyen, X.-N., Obraczka, K., & Turletti, T. (2014) · IEEE Communications Surveys & Tutorials · doi:10.1109/surv.2014.012214.00180 · Cited by 2,203 · cited 1×
“Considering the need to define configuration rules in a flexible and secured manner, the software defined networking (SDN) is likely a key technology in this regard [26], [27].”
BackgroundWollschlaeger, M., Sauter, T., & Jasperneite, J. (2017) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2017.2649104 · Cited by 1,726 · cited 1×
“Some interesting references investigate network communication in Industry 4.0 [17], and more specifically regarding wireless communications [18], [19].”
BackgroundInfluentialMachine Learning and Deep Learning Methods for Intrusion Detection Systems: A Survey
Liu, H., & Lang, B. (2019) · Applied Sciences · doi:10.3390/app9204396 · Cited by 1,133 · cited 1×
“These systems use technologies such as machine learning and deep learning which are able to accurately discover essential differences between normal data and abnormal data [38], [39].”
BackgroundScanning the Industry 4.0: A Literature Review on Technologies for Manufacturing Systems
Alcácer, V., & Cruz-Machado, V. (2019) · Engineering Science and Technology, an International Journal · doi:10.1016/j.jestch.2019.01.006 · Cited by 1,063 · cited 1×
“These technologies [3] include Internet of Things (IoT), cloud computing, big data, digital twin,”
BackgroundTange, K., De Donno, M., Fafoutis, X., & Dragoni, N. (2020) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2020.3011208 · Cited by 410 · cited 1×
“A more specific recent survey [9] reviewed 262 papers regarding every aspect of Industry 4.0 security.”
BackgroundInfluentialCybersecurity for Industry 4.0 in the current literature: A reference framework
Lezzi, M., Lazoi, M., & Corallo, A. (2018) · Computers in Industry · doi:10.1016/j.compind.2018.09.004 · Cited by 404 · cited 10×
“As an example, a manufacturing line can be considered a CPS [10].”
BackgroundMethodInfluentialCybersecurity for industrial control systems: A survey
Bhamare, D., Zolanvari, M., Erbad, A., Jain, R., Khan, K., & Meskin, N. (2020) · Computers & Security · doi:10.1016/j.cose.2019.101677 · Cited by 394 · cited 1×
“Another survey proposed in [7] focuses on cybersecurity.”
BackgroundThe Cybersecurity Landscape in Industrial Control Systems
McLaughlin, S., Konstantinou, C., Wang, X., Davi, L., Sadeghi, A.-R., Maniatakos, M., & Karri, R. (2016) · Proceedings of the IEEE · doi:10.1109/jproc.2015.2512235 · Cited by 391 · cited 1×
“The ICS network can be divided into three levels [40], [41]: Level 0: Operative part with sensors/actuators; Level 1: Control part with PLC/HMI; Level 2: Supervision with control room/SCADA; IT solutions such as firewall/DMZ are usually used in the level 2 and higher to protect from DDoS attacks or…”
BackgroundFramework for Improving Critical Infrastructure Cybersecurity, Version 1.1
National Institute of Standards and Technology (2018) · doi:10.6028/nist.cswp.04162018 · Cited by 386
Tackling Faults in the Industry 4.0 Era—A Survey of Machine-Learning Solutions and Key Aspects
Angelopoulos, A., Michailidis, E. T., Nomikos, N., Trakadas, P., Hatziefremidis, A., Voliotis, S., & Zahariadis, T. (2019) · Sensors · doi:10.3390/s20010109 · Cited by 365 · cited 1×
“Among the most recent surveys, [8] also investigated machine learning solutions for tackling faults in the Industry 4.0 era.”
BackgroundInfluentialFernandez-Carames, T. M., & Fraga-Lamas, P. (2019) · IEEE Access · doi:10.1109/access.2019.2908780 · Cited by 321 · cited 1×
“In addition, Industry 4.0 encourages the application of these technologies to enable distributed communication architectures (P2P-like), instead of relying only on typical cloud or other centralized architectures [4].”
BackgroundInfluentialCorallo, A., Lazoi, M., & Lezzi, M. (2020) · Computers in Industry · doi:10.1016/j.compind.2019.103165 · Cited by 298 · cited 1×
“Table 3 reports the analysis found in [23] of the business impacts filtered by risks.”
BackgroundA Multidimensional Critical State Analysis for Detecting Intrusions in SCADA Systems
Carcano, A., Coletta, A., Guglielmi, M., Masera, M., Nai Fovino, I., & Trombetta, A. (2011) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2010.2099234 · Cited by 259 · cited 1×
“The notion of ‘‘distance’’ is related to the ICS states, and was introduced in [43].”
BackgroundSafety and Security in Cyber-Physical Systems and Internet-of-Things Systems
Wolf, M., & Serpanos, D. (2018) · Proceedings of the IEEE · doi:10.1109/jproc.2017.2781198 · Cited by 250 · cited 1×
“According to [31], these systems should be designed and operated under a unified view of safety and security characteristics.”
BackgroundNetwork and information security challenges within Industry 4.0 paradigm
Pereira, T., Barreto, L., & Amaral, A. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.09.047 · Cited by 200 · cited 2×
“The interconnection between the equipment makes security more complex, and brings unexpected vulnerabilities [20], [21].”
BackgroundInfluentialBehavior-Rule Based Intrusion Detection Systems for Safety Critical Smart Grid Applications
Mitchell, R., & Chen, I.-R. (2013) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2013.2258948 · Cited by 184 · cited 1×
“The first step is based on behavioral models [42], which represent the normal way of functioning of the system.”
BackgroundAddressing Industry 4.0 Cybersecurity Challenges
Culot, G., Fattori, F., Podrecca, M., & Sartor, M. (2019) · IEEE Engineering Management Review · doi:10.1109/emr.2019.2927559 · Cited by 184 · cited 1×
“This management view of cybersecurity developed in [11] completes the technical one.”
BackgroundCybersecurity in industrial control systems: Issues, technologies, and challenges
Asghar, M. R., Hu, Q., & Zeadally, S. (2019) · Computer Networks · doi:10.1016/j.comnet.2019.106946 · Cited by 172 · cited 6×
“In the manufacturing area, there are several types of ICS (Industrial control systems) [15].”
BackgroundMethodInfluentialDigital Twins for Cyber-Physical Systems Security: State of the Art and Outlook
Eckhart, M., & Ekelhart, A. (2019) · Security and Quality in Cyber-Physical Systems Engineering · doi:10.1007/978-3-030-25312-7_14 · Cited by 158 · cited 5×
“Indeed, [45] presented a passive state replication approach which aimed to replicate a state from a physical device to a digital twin.”
BackgroundInfluentialIntrusion Detection Using Deep Belief Network and Probabilistic Neural Network
Zhao, G., Zhang, C., & Zheng, L. (2017) · 22017 IEEE International Conference on Computational Science and Engineering (CSE) and IEEE International Conference on Embedded and Ubiquitous Computing (EUC) · doi:10.1109/cse-euc.2017.119 · Cited by 149 · cited 1×
“These systems use technologies such as machine learning and deep learning which are able to accurately discover essential differences between normal data and abnormal data [38], [39].”
BackgroundA Review of Industry 4.0 Manufacturing Process Security Risks
Prinsloo, J., Sinha, S., & von Solms, B. (2019) · Applied Sciences · doi:10.3390/app9235105 · Cited by 140 · cited 1×
“0 concepts and applications is proposed in [6], as well as some recent cybersecurity attacks observed in several manufacturing factories in the world.”
BackgroundAn Ontology-Based Cybersecurity Framework for the Internet of Things
Mozzaquatro, B. A., Agostinho, C., Goncalves, D., Martins, J., & Jardim-Goncalves, R. (2018) · Sensors · doi:10.3390/s18093053 · Cited by 129 · cited 1×
“Considering this situation, an ontology-based cybersecurity framework for IoT was proposed by [32].”
MethodCurrent cyber-defense trends in industrial control systems
Rubio, J. E., Alcaraz, C., Roman, R., & Lopez, J. (2019) · Computers & Security · doi:10.1016/j.cose.2019.06.015 · Cited by 113 · cited 6×
“…the type of attack, the existence of infected devices, as well as the activities carried out on the system. a: ThreatMatrix BY ATTICA NETWORKS ThreatMatrix is the major existing honeypot-based detection platform able to detect real-time intrusions in ICS/SCADA systems, and in IoT environments [14].”
BackgroundInfluentialTaxonomies for Reasoning About Cyber-physical Attacks in IoT-based Manufacturing Systems
Pan, Y., White, J., Schmidt, D., Elhabashy, A., Sturm, L., Camelio, J., & Williams, C. (2017) · International Journal of Interactive Multimedia and Artificial Intelligence · doi:10.9781/ijimai.2017.437 · Cited by 81 · cited 1×
“As it was established by [35], the threats exposed in additive manufacturing stretch across digital manufacturing devices of all shapes and sizes.”
BackgroundMarketing Department, U. O. F. –. M., NGUYEN, X. T., & LUU, Q. K. (2020) · The Journal of Asian Finance, Economics and Business · doi:10.13106/jafeb.2020.vol7.no6.255 · Cited by 63 · cited 1×
“An interesting concrete study regarding these aspects is presented in [12].”
BackgroundTowards a reference ontology for security in the Internet of Things
Mozzaquatro, B. A., Jardim‐Gonçalves, R., & Agostinho, C. (2015) · IEEE International Symposium on Measurements & Networking (M&N) · doi:10.1109/iwmn.2015.7322984 · Cited by 55
Software defined networking firewall for industry 4.0 manufacturing systems
Tsuchiya, A., Fraile, F., Koshijima, I., Ortiz, A., & Poler, R. (2018) · Journal of Industrial Engineering and Management · doi:10.3926/jiem.2534 · Cited by 49 · cited 1×
“In this context, [29] has proposed a protective network structure based on a SDN firewall specifically designed for industrial networks, without compromising network flexibility (Fig.”
BackgroundEnabling wireless technologies for industry 4.0: State of the art
Bonavolontà, F., Tedesco, A., Moriello, R. S. L., & Tufano, A. (2017) · IEEE International Symposium on Measurements & Networking (M&N) · doi:10.1109/iwmn.2017.8078381 · Cited by 49 · cited 1×
“Some interesting references investigate network communication in Industry 4.0 [17], and more specifically regarding wireless communications [18], [19].”
BackgroundInfluentialImproving cybersecurity for Industrial Control Systems
Graham, J. A., Hieb, J., & Naber, J. F. (2016) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2016.7744960 · Cited by 43 · cited 1×
“Then, the transmitted data between the comptroller and the manufacturing device will be handled by a Manufacturing Enforcement Device (MSED), of which the complete overview can be found in [36].”
MethodSecurity Challenges in the Industry 4.0 Era
Alani, M. M., & Alloghani, M. (2019) · Industry 4.0 and Engineering for a Sustainable Future · doi:10.1007/978-3-030-12953-8_8 · Cited by 37 · cited 1×
“The interconnection between the equipment makes security more complex, and brings unexpected vulnerabilities [20], [21].”
BackgroundInformation security aspects of Industry 4.0
Kiss, M., Breda, G., & Muha, L. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.02.293 · Cited by 35 · cited 2×
“For these reasons, [22] proposed to create a physical information security.”
Background(2018) · doi:10.24760/iasme.10.1_19 · Cited by 31 · cited 1×
“0 in manufacturing factory efficiency, cybersecurity breaches would involve critical impacts on the business model and loss of competitiveness [5].”
BackgroundCyberphysical Security for Industrial Control Systems Based on Wireless Sensor Networks
Lu, T., Guo, X., Li, Y., Peng, Y., Zhang, X., Xie, F., & Gao, Y. (2014) · International Journal of Distributed Sensor Networks · doi:10.1155/2014/438350 · Cited by 31 · cited 1×
“Several authors [10], [16], show that ICS is an application area of the CPS.”
BackgroundA New Approach to Cyberphysical Security in Industry 4.0
Wegner, A., Graham, J., & Ribble, E. (2017) · Springer Series in Advanced Manufacturing · doi:10.1007/978-3-319-50660-9_3 · Cited by 30 · cited 3×
“The authors [34] mentioned smaller OS such as SeL4, which was formally verified to be secure.”
BackgroundTime-slotted software-defined Industrial Ethernet for real-time Quality of Service in Industry 4.0
Zeng, P., Wang, Z., Jia, Z., Kong, L., Li, D., & Jin, X. H. (2019) · Future Generation Computer Systems · doi:10.1016/j.future.2019.04.009 · Cited by 26
SICARD, F., ZAMAI, É., & FLAUS, J.-M. (2019) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2019.03.020 · Cited by 25 · cited 2×
“An innovative methodology was proposed by [13], and is based on the concept of ‘‘automation knowledge’’.”
MethodAnalysis of Software Defined Network firewall (SDF)
Satasiya, D., & Raviya Rupal, D. (2016) · 2016 International Conference on Wireless Communications, Signal Processing and Networking (WiSPNET) · doi:10.1109/wispnet.2016.7566125 · Cited by 21 · cited 1×
“Considering the need to define configuration rules in a flexible and secured manner, the software defined networking (SDN) is likely a key technology in this regard [26], [27].”
BackgroundCybersecurity for Industry 4.0 and Advanced Manufacturing Environments with Ensemble Intelligence
Thames, L., & Schaefer, D. (2017) · Springer Series in Advanced Manufacturing · doi:10.1007/978-3-319-50660-9_10 · Cited by 20 · cited 4×
“The SDCM is divided into 3 layers: virtual, control and distributed hardware.”
MethodInfluentialInformation security breaches and precautions on Industry 4.0
Kondiloglu, A., Bayer, H., Celik, E., & Atalay, M. (2017) · Technology audit and production reserves · doi:10.15587/2312-8372.2017.117593 · Cited by 14 · cited 2×
“In the Logistics area, there are numerous wireless devices which have some vulnerabilities, such as [24]: Wifi networks, especially when not encrypted; Business applications that still use HTTP protocol; Installing of malicious applications.”
BackgroundWireless Networks and Critical Information Infrastructure
Illesi, Z., Halasz, A., & Janos Varga, P. (2018) · 2018 IEEE 12th International Symposium on Applied Computational Intelligence and Informatics (SACI) · doi:10.1109/saci.2018.8441023 · Cited by 11 · cited 1×
“Moreover, the explosive growth of wireless networks in information system architectures has increased the possibility of information leaks even more [25].”
BackgroundSicard, F., Zamai, É., & Flaus, J.-M. (2018) · Diagnosability, Security and Safety of Hybrid Dynamic and Cyber-Physical Systems · doi:10.1007/978-3-319-74962-4_5 · Cited by 10 · cited 2×
“The ICS network can be divided into three levels [40], [41]: Level 0: Operative part with sensors/actuators; Level 1: Control part with PLC/HMI; Level 2: Supervision with control room/SCADA; IT solutions such as firewall/DMZ are usually used in the level 2 and higher to protect from DDoS attacks or…”
BackgroundDeveloping a Cybersecurity Immune System for Industry 4.0
Petrenko, S. (2022) · River Publishers eBooks · doi:10.1201/9781003337874 · Cited by 9
Internet of things for smart factory
(2015) · HAL · Cited by 5
Self-citationCybersecurity for Industrial Control Systems: A SurveyPreprint
Bhamare, D., Zolanvari, M., Erbad, A., Jain, R. K., Khan, K. M., & Meskin, N. (2020) · arXiv (Cornell University) · doi:10.48550/arxiv.2002.04124 · Cited by 2
Detection of cyber-attacks on Wi-Fi networks by classification of spectral data
Villain, J., Deniau, V., Fleury, A., Gransart, C., & Simon, E. P. (2020) · 2020 XXXIIIrd General Assembly and Scientific Symposium of the International Union of Radio Science · doi:10.23919/ursigass49373.2020.9232196 · Cited by 1
NGUYEN, T. X., Khai Quang, L. U. U., NGUYEN, T. T. H., et al. (2019) · KODISA International Conference on Business and Economics (KODISA.ICBE) · doi:10.35646/kodisa.icbe.2019.7.5.53
Research works printed but not linked: 4
- 2014, Managing cybersecurity for Industrial control systems
- 2014, Cybersecurity for Industrial Control Systems Detailed Measures
- 2014, Cybersecurity for Industrial Control Systems Classification Method and Key Measures
- 2018, Good practices for security of internet of things in the context of smart manufacturing
Cited by
Nozari, H., Szmelter-Jarosz, A., & Ghahremani-Nahr, J. (2022) · Sensors · doi:10.3390/s22082931 · Cited by 176
“There is a combination of physical and digital systems in an intelligent factory and, accordingly, in an intelligent supply chain that, in addition to generating and maintaining data using IoT technology, uses artificial intelligence for analysis, enabling real-time collaboration, but there is a risk of expanding the…”
BackgroundA review of digital twins and their application in cybersecurity based on artificial intelligence
Homaei, M., Gutiérrez, Ó. M., Núñez, J. C. S., Ávila, M., & Lindo, A. C. (2024) · Artificial Intelligence Review · doi:10.1007/s10462-024-10805-3 · Cited by 238
Artificial Intelligence: Revolutionizing Cyber Security in the Digital Era
Kumar, S., Gupta, U., Singh, A. K., & Singh, A. K. (2023) · Journal of Computers Mechanical and Management · doi:10.57159/gadl.jcmm.2.3.23064 · Cited by 180
Virtual manufacturing in Industry 4.0: A review
Soori, M., Behrooz Arezoo, B., & Dastres, R. (2023) · Data Science and Management · doi:10.1016/j.dsm.2023.10.006 · Cited by 155
AIoT for sustainable manufacturing: Overview, challenges, and opportunities
Matin, A., Islam, M. R., Wang, X., Huo, H., & Xu, G. (2023) · Internet of Things · doi:10.1016/j.iot.2023.100901 · Cited by 118
Metadata
- Authors
- Mullet, V., Sondi, P., & Ramat, E.
- Affiliations
- Université du littoral côte d'opale (FR)
- Venue
- IEEE Access
- Published
- 2021
- Volume
- 9
- Pages
- 23235-23263
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W3128183651
- Cited by
- 161
- References
- 47
- Citations by year
- 2026: 15 · 2025: 36 · 2024: 40 · 2023: 44 · 2022: 22 · 2021: 4
- FWCI
- 14.23
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion, cc-by)
- HAL (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- CPER ELSAT2020 project
- French State, and Industry of the Future Program, both by the European Union with the European Regional Development Fund
- Hauts-de-France Region Council
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Computer Science › Information Systems › Information and Cyber Security
- Physical Sciences › Computer Science › Computer Networks and Communications › Network Security and Intrusion Detection
- Keywords
- Industry 4.0, factories, Internet of Things, cloud computing, network vulnerability, cyber threats, honeypots, digital twin, cybersecurity countermeasures, industrial automation security
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-09, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-09 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.