A Review of High-Speed GaN Power Modules: State of the Art, Challenges, and Solutions
The DOI matches its Crossref record; 137 of the 142 references it cites were found in a registry or an index.
Abstract
Wide bandgap (WBG) devices are a desirable choice for high-density energy conversion systems. In high-speed hard-switching applications, voltage overshoot across device terminals, oscillations at gate loop, and electromagnetic interference (EMI) become harder to mitigate, and the overall system reliability is reduced. To address the key challenges and harness the benefits offered by these latest generations of devices, improved and advanced packaging structures are required, as packaging technology often has a critical impact on module performance and reliability. This article summarizes the design procedure for power modules, essential parts, and available materials for the fabrication of a power module package. Moreover, it provides a review of commercially available gallium nitride-based high electron mobility transistors (GaN HEMTs) and state-of-the-art module packaging technologies adopted for them with a focus on module layout, module integration trends, and identifying their impacts on the GaN HEMT’s performance. Through this review, this article also discusses major challenges faced by designers with GaN HEMTs in power electronics applications and their potential solutions, which is critical for the mainstream adoption of GaN HEMTs and defining the future technology roadmap.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“By contrast, losses associated with output capacitance ( C OSS), gate charge, and voltage overshoot from parasitic inductance are often more significant [4,12,13].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [13]
Citations
Cites
The impact of surface states on the DC and RF characteristics of AlGaN/GaN HFETs
Vetury, R., Zhang, N. Q., Keller, S., & Mishra, U. K. (2001) · IEEE Transactions on Electron Devices · doi:10.1109/16.906451 · Cited by 1,453 · cited 1×
“primarily by using field plates and surface passivation techniques [134].”
MethodReview of Commercial GaN Power Devices and GaN-Based Converter Design Challenges
Jones, E. A., Wang, F. F., & Costinett, D. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2582685 · Cited by 1,259 · cited 1×
“These reduced junction capacitances along with intrinsically higher Vsat enable faster switching speeds, which reduces the switching loss [9], [10], [11].”
BackgroundSilicon carbide benefits and advantages for power electronics circuits and systems
Elasser, A., & Chow, T. P. (2002) · Proceedings of the IEEE · doi:10.1109/jproc.2002.1021562 · Cited by 537 · cited 1×
“W ITH the advent of wide bandgap (WBG) semiconductor devices, high-speed efficient power conversion (EPC) is no longer a vision but a reality [1], [2], [3], [4].”
BackgroundGaN Transistors for Efficient Power Conversion
(2014) · Wiley eBooks · doi:10.1002/9781118844779 · Cited by 530 · cited 10×
“The factors that are the basis of this comparison are band gap (EV ), critical electric field (EC), the ON-state channel resistance of the device (Ron), electron mobility (μn), saturation velocity (Vsat), and thermal conductivity (λ), as shown in Table I [7].”
BackgroundInfluentialDie Attach Materials for High Temperature Applications: A Review
Manikam, V. R., & Cheong, K. Y. (2011) · IEEE Transactions on Components, Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2010.2100432 · Cited by 478 · cited 2×
“Most silver-filled epoxies used in commercial small-signal devices fail at temperatures near 200 ◦C [153]; hence, they are not suitable for operation where the temperature exceeds 200 ◦C [43].”
BackgroundOverview of transient liquid phase and partial transient liquid phase bonding
Cook, G. O., & Sorensen, C. D. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-5561-1 · Cited by 473
Silicon Carbide Power Transistors: A New Era in Power Electronics Is Initiated
Rabkowski, J., Peftitsis, D., & Nee, H. (2012) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2012.2193291 · Cited by 422 · cited 1×
“W ITH the advent of wide bandgap (WBG) semiconductor devices, high-speed efficient power conversion (EPC) is no longer a vision but a reality [1], [2], [3], [4].”
BackgroundSurvey of High-Temperature Reliability of Power Electronics Packaging Components
Khazaka, R., Mendizabal, L., Henry, D., & Hanna, R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2357836 · Cited by 386 · cited 3×
“Different ceramic materials, such as Al2O3, Si3N4, AlN, and BeO, are some of the most widely used for the substrate of the power module [31], [32], [33].”
Background1200-V Normally Off GaN-on-Si Field-Effect Transistors With Low Dynamic on -Resistance
Chu, R., Corrion, A., Chen, M., Li, R., Wong, D., Zehnder, D., Hughes, B., & Boutros, K. (2011) · IEEE Electron Device Letters · doi:10.1109/led.2011.2118190 · Cited by 367
A Survey of EMI Research in Power Electronics Systems With Wide-Bandgap Semiconductor Devices
Zhang, B., & Wang, S. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2953730 · Cited by 367 · cited 1×
“More practical solutions to improve system performance and reliability, as well as to meet EMI standards, are summarized in [141], hence not repeated here.”
BackgroundThermal degradation of polymeric materials
(1994) · Additives for Polymers · doi:10.1016/0306-3747(94)90200-3 · Cited by 342 · cited 1×
“Conventional polymeric or organic encapsulants have poor thermal conductivity and cannot survive longterm operation at high temperatures (>250 ◦C) due to their thermal degradation [160], [161].”
BackgroundA Review of SiC Power Module Packaging: Layout, Material System and Integration
Huazhong University of Science and Technology, & Chen, C. (2017) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2017.00017 · Cited by 310 · cited 1×
“Most silver-filled epoxies used in commercial small-signal devices fail at temperatures near 200 ◦C [153]; hence, they are not suitable for operation where the temperature exceeds 200 ◦C [43].”
BackgroundComparative Analysis on Conducted CM EMI Emission of Motor Drives: WBG Versus Si Devices
Han, D., Li, S., Wu, Y., Choi, W., & Sarlioglu, B. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2681968 · Cited by 297 · cited 1×
“In switch mode power conversion (SMPS), the switching waveform, as well as the noise voltage source, is of a trapezoidal shape due to certain rise and fall times in a practical system [136].”
BackgroundMethodology for Wide Band-Gap Device Dynamic Characterization
Zhang, Z., Guo, B., Wang, F. F., Jones, E. A., Tolbert, L. M., & Blalock, B. J. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2655491 · Cited by 287 · cited 1×
“The root cause of voltage overshoot is the stray inductance in the power loop [20], [21].”
BackgroundActive Gate Driver for Crosstalk Suppression of SiC Devices in a Phase-Leg Configuration
Zhang, Z., Wang, F., Tolbert, L. M., & Blalock, B. J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2268058 · Cited by 278 · cited 1×
“which shows promising results in mitigating this issue [118].”
BackgroundChen, Z., Boroyevich, D., & Burgos, R. (2010) · The 2010 International Power Electronics Conference - ECCE ASIA - · doi:10.1109/ipec.2010.5543851 · Cited by 236 · cited 1×
“Providing a kelvin connection is a wellknown solution to avoid common source inductance, which can decouple the power and gate loops [107].”
BackgroundAutomotive Power Module Packaging: Current Status and Future Trends
Yang, Y., Dorn-Gomba, L., Rodriguez, R., Mak, C., & Emadi, A. (2020) · IEEE Access · doi:10.1109/access.2020.3019775 · Cited by 203
Characterization and Modeling of High-Switching-Speed Behavior of SiC Active Devices
Chen, Z. (2009) · VTechWorks (Virginia Tech) · Cited by 189
Comparison of Wide-Bandgap Semiconductors for Power Electronics Applications
Ozpineci, B. (2004) · doi:10.2172/885849 · Cited by 186 · cited 1×
“The factors that are the basis of this comparison are band gap (EV ), critical electric field (EC), the ON-state channel resistance of the device (Ron), electron mobility (μn), saturation velocity (Vsat), and thermal conductivity (λ), as shown in Table I [7].”
MethodAdvantages and new development of direct bonded copper substrates
Schulz-Harder, J. (2003) · Microelectronics Reliability · doi:10.1016/s0026-2714(02)00343-8 · Cited by 181 · cited 1×
“Compared to DBC, DPC provides a very strong bond strength between the Al2O3/AlN substrate and the copper metal, due to the use of a thin film bonding layer [147].”
BackgroundEvaluation of Switching Performance of SiC Devices in PWM Inverter-Fed Induction Motor Drives
Zhang, Z., Wang, F., Tolbert, L. M., Blalock, B. J., & Costinett, D. J. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2375827 · Cited by 181 · cited 1×
“With the same amount of inductance in the power and gate loops, observed voltage overshoot and ringing across the device terminals increase substantially with higher di/dt due to faster switching action, which persists stress on the device terminals [100],”
BackgroundSurvey on High-Temperature Packaging Materials for SiC-Based Power Electronics Modules
Coppola, L., Huff, D. N., Wang, F., Burgos, R. P., & Boroyevich, D. (2007) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2007.4342356 · Cited by 178
High-Temperature Operation of SiC Power Devices by Low-Temperature Sintered Silver Die-Attachment
Bai, J. G., Yin, J., Zhang, Z., Lu, G.-Q., & van Wyk, J. D. (2007) · IEEE Transactions on Advanced Packaging · doi:10.1109/tadvp.2007.898628 · Cited by 177 · cited 1×
“Silver sintering is based on the spontaneous sinter ability of silver particles in the nanoscale and microscale at temperatures of above 220 ◦C [157].”
BackgroundInstability in Half-Bridge Circuits Switched With Wide Band-Gap Transistors
Lemmon, A., Mazzola, M., Gafford, J., & Parker, C. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2273275 · Cited by 169
Application-based review of GaN HFETs
Jones, E. A., Wang, F., & Ozpineci, B. (2014) · 2014 IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda.2014.6964617 · Cited by 165 · cited 1×
“a native channel between the source and the drain of the device that makes the GaN HEMT an inherently depletion mode device (normally on) [54].”
BackgroundDegradation Assessment and Precursor Identification for SiC MOSFETs Under High Temp Cycling
Ugur, E., Yang, F., Pu, S., Zhao, S., & Akin, B. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2891214 · Cited by 159 · cited 1×
“must be considered in the design phase to ensure overall system functionality [28].”
BackgroundCharacterization and modeling of 1.2 kv, 20 A SiC MOSFETs
Chen, Z., Boroyevich, D., Burgos, R., & Wang, F. (2009) · 2009 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2009.5316106 · Cited by 156 · cited 1×
“layout parasitic and voltage overshoot [22], [23].”
Survey of High-Temperature Polymeric Encapsulants for Power Electronics Packaging
Yao, Y., Lu, G., Boroyevich, D., & Ngo, K. D. T. (2015) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2014.2337300 · Cited by 154 · cited 1×
“There are also articles reporting other high-temperature polymeric encapsulation materials, including polyimide [162], perylene HT [163], phthalonitrile [164], and polymer-filler composites [165].”
BackgroundWang, K., Yang, X., Wang, L., & Jain, P. K. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2684094 · Cited by 150 · cited 5×
“(b) Sustained oscillation during reverse conduction [131].”
BackgroundInfluentialAnalysis of the switching speed limitation of wide band-gap devices in a phase-leg configuration
Zhang, Z., Zhang, W., Wang, F., Tolbert, L. M., & Blalock, B. J. (2012) · 2012 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342164 · Cited by 132 · cited 1×
“High-speed switching causes the device to suffer excessive voltage stress from voltage overshoot, which harms the reliability of the system and curtails its overall lifetime [18], [19].”
BackgroundZulauf, G., Guacci, M., & Kolar, J. W. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2955656 · Cited by 132 · cited 1×
“Part of the electrons of 2DEG is trapped near the gate and buffer layer when a large electric field and a large current occur simultaneously in the drain region, mostly known as the voltage–current (V −I ) overlap during hard switching applications [133].”
BackgroundDing, C., Liu, H., Ngo, K. D. T., Burgos, R. P., & Lu, G. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3070326 · Cited by 126 · cited 1×
“Double-sided cooling helps to cool down the device in an efficient way, reportedly increasing the current handling capacity of the package by 34% [95], which will proportionately raise the power density.”
BackgroundFundamentals of Lead-Free Solder Interconnect Technology: From Microstructures to Reliability
Lee, T.-K., Bieler, T. R., Kim, C.-U., & Ma, H. (2014) · Springer eBooks · doi:10.1007/978-1-4614-9266-5 · Cited by 122
Impact of Parasitic Elements on the Spurious Triggering Pulse in Synchronous Buck Converter
Wang, J., & Chung, H. S.-H. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2304454 · Cited by 121 · cited 1×
“simultaneously, which creates a short circuit across the dc link and leads to a shoot-through event [115].”
BackgroundIradukunda, A.-C., Huitink, D. R., & Luo, F. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2953102 · Cited by 116 · cited 1×
“Advanced integrated cooling solutions are discussed in greater detail in [53], hence not repeated.”
BackgroundSelf-citationEvaluation of Encapsulation Materials for High-Temperature Power Device Packaging
Locatelli, M., Khazaka, R., Diaham, S., Pham, C.-D., Bechara, M., Dinculescu, S., & Bidan, P. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2279997 · Cited by 107 · cited 1×
“To avoid the high CTE of common baseplate solutions, metal matrix composites, such as Cu–W and Cu–Mo, have been proposed to achieve lower CTE mismatch and high thermal conductivity concurrently [50], [51], [52].”
BackgroundA Fast-Switching Integrated Full-Bridge Power Module Based on GaN eHEMT Devices
Jorgensen, A. B., Beczkowski, S., Uhrenfeldt, C., Petersen, N. H., Jorgensen, S., & Munk-Nielsen, S. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2845538 · Cited by 106 · cited 2×
“[91] from Aalborg University have demonstrated a hybrid PCB-DBC-based package for a full-bridge module.”
MethodActive current balancing for parallel-connected silicon carbide MOSFETs
Xue, Y., Lu, J., Wang, Z., Tolbert, L. M., Blalock, B. J., & Wang, F. (2013) · 2013 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2013.6646891 · Cited by 105 · cited 1×
“Active gate driver solution is used as another remedy in [124] to address this problem.”
MethodA frequency-domain study on the effect of DC-link decoupling capacitors
Chen, Z., Boroyevich, D., Mattavelli, P., & Ngo, K. (2013) · 2013 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2013.6646938 · Cited by 101
Design and Experimental Validation of a Wire-Bond-Less 10-kV SiC MOSFET Power Module
DiMarino, C., Mouawad, B., Johnson, C. M., Wang, M., Tan, Y.-S., Lu, G.-Q., Boroyevich, D., & Burgos, R. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2944138 · Cited by 101 · cited 1×
“These cause high-density packaging development to be difficult [146].”
BackgroundPb-free high temperature solders for power device packaging
Yamada, Y., Takaku, Y., Yagi, Y., Nishibe, Y., Ohnuma, I., Sutou, Y., Kainuma, R., & Ishida, K. (2006) · Microelectronics Reliability · doi:10.1016/j.microrel.2006.07.083 · Cited by 100 · cited 1×
“The use of leaded die attach materials on large dies is due to the characteristics of the leaded solder alloys itself, which creates lower stress concentration points on the die and its edges due to its good ductility [155], [156].”
BackgroundWang, M., Luo, F., & Xu, L. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2720731 · Cited by 96 · cited 1×
“A double-ended source structure is proposed in [123], which balances the current in the dynamic region among the parallel dies.”
BackgroundSelf-citationInvestigation of 1.2 kV SiC MOSFET for high frequency high power applications
Sheng, H., Chen, Z., Wang, F., & Millner, A. R. (2010) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2010.5433441 · Cited by 93 · cited 1×
“It is done mostly by adding higher gate resistance that limits the rate of charge/discharge of the input capacitance [103].”
BackgroundGate drive design considerations for high voltage cascode GaN HEMT
Zhang, W., Huang, X., Lee, F. C., & Li, Q. (2014) · 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014 · doi:10.1109/apec.2014.6803503 · Cited by 91 · cited 1×
“The high dV/dt is also seen by the stray capacitances in the layout and isolation barrier capacitances of the gate driver and the power supply, which results in displacement current being generated, which propagates toward control circuitry [109], [110], [111].”
BackgroundReusch, D., & Strydom, J. (2013) · 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2013.6520279 · Cited by 88
Wide bandgap semiconductor power devices for energy efficient systems
Chow, T. P. (2015) · 2015 IEEE 3rd Workshop on Wide Bandgap Power Devices and Applications (WiPDA) · doi:10.1109/wipda.2015.7369328 · Cited by 88 · cited 1×
“W ITH the advent of wide bandgap (WBG) semiconductor devices, high-speed efficient power conversion (EPC) is no longer a vision but a reality [1], [2], [3], [4].”
BackgroundSheng, W. W., & Colino, R. P. (2004) · CRC Press eBooks · doi:10.1201/9780203507308 · Cited by 88
Zhang, Z., Guo, B., Wang, F., Tolbert, L. M., Blalock, B. J., Liang, Z., & Ning, P. (2014) · 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014 · doi:10.1109/apec.2014.6803660 · Cited by 86 · cited 1×
“High-speed switching causes the device to suffer excessive voltage stress from voltage overshoot, which harms the reliability of the system and curtails its overall lifetime [18], [19].”
BackgroundA Compact Double-Sided Cooling 650V/30A GaN Power Module With Low Parasitic Parameters
Li, B., Yang, X., Wang, K., Zhu, H., Wang, L., & Chen, W. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3092367 · Cited by 79 · cited 2×
“DSC GaN full bridge using the DPC substrate [96].”
BackgroundMethodAssembly and Packaging Technologies for High-Temperature and High-Power GaN Devices
Bajwa, A. A., Qin, Y., Reiner, R., Quay, R., & Wilde, J. (2015) · IEEE Transactions on Components, Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2015.2468595 · Cited by 77 · cited 1×
“Discrete GaN Package [64] and CPES [65].”
Lu, J. L., Bai, H. K., Brown, A. W., McAmmond, M., Chen, D., & Styles, J. (2016) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2016.7467923 · Cited by 75 · cited 1×
“In [127], an unsynchronized gate driver is proposed to address this issue, where one switch is”
BackgroundParalleling GaN E-HEMTs in 10kW–100kW systems
Lu, J. L., & Chen, D. (2017) · 2017 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2017.7931131 · Cited by 73 · cited 2×
“Lu and Chen [79] have optimized a layout for GaN Systems’ top-side cooled device GS665108T in a six-layer PCB board.”
MethodA New Package of High-Voltage Cascode Gallium Nitride Device for Megahertz Operation
Zhang, W., Huang, X., Liu, Z., Lee, F. C., She, S., Du, W., & Li, Q. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2418572 · Cited by 72 · cited 1×
“The total power saving of the device packaged with this extra capacitor provides a 16% loss reduction at 1-MHz switching frequency during ZVS turn on compared to the module without the balancing capacitor [63].”
BackgroundA high power-density and high efficiency insulated metal substrate based GaN HEMT power module
Lu, J. L., Chen, D., & Yushyna, L. (2017) · 2017 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8096647 · Cited by 72 · cited 1×
“Vertical power loop in the IMS GaN module [85].”
BackgroundA Novel Hybrid Packaging Structure for High-Temperature SiC Power Modules
Wang, R., Chen, Z., Boroyevich, D., Jiang, L., Yao, Y., & Rajashekara, K. (2013) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2257977 · Cited by 71 · cited 1×
“which forms a coupled network between the gate and the power loop [106].”
BackgroundDesign considerations for GaN HEMT multichip halfbridge module for high-frequency power converters
Luo, F., Chen, Z., Xue, L., Mattavelli, P., Boroyevich, D., & Hughes, B. (2014) · 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014 · doi:10.1109/apec.2014.6803361 · Cited by 71 · cited 2×
“16(a), is reported, which achieved <5-nH power loop inductance [81].”
BackgroundSelf-citationCharacterization of Encapsulants for High-Voltage High-Temperature Power Electronic Packaging
Yao, Y., Chen, Z., Lu, G., Boroyevich, D., & Ngo, K. D. T. (2012) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2011.2173344 · Cited by 71 · cited 1×
“Conditions of concern include moisture, solvents, gases, and radiation [46], [47].”
BackgroundMiyazaki, H., Zhou, Y., Iwakiri, S., Hirotsuru, H., Hirao, K., Fukuda, S., Izu, N., & Hyuga, H. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.02.072 · Cited by 70 · cited 1×
“The active metal brazing (AMB) process is another choice to join the metal and the ceramic [36].”
BackgroundA Highly Integrated PCB Embedded GaN Full-Bridge Module With Ultralow Parasitic Inductance
Qi, Z., Pei, Y., Wang, L., Yang, Q., & Wang, K. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3128694 · Cited by 66 · cited 1×
“(c) 650-V/30-A PCB embedded full-bridge GaN module [144].”
BackgroundDesign and Implementation of Integrated Common Mode Capacitors for SiC-JFET Inverters
Robutel, R., Martín, C., Buttay, C., Morel, H., Mattavelli, P., Boroyevich, D., & Meuret, R. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2279772 · Cited by 64 · cited 1×
“Passive integration of a Y capacitor into the module can be another way to address this problem [139].”
BackgroundCharacterization of Wide Bandgap Power Semiconductor Devices
Wang, F. “., Zhang, Z., & Jones, E. A. (2018) · Institution of Engineering and Technology eBooks · doi:10.1049/pbpo128e · Cited by 64 · cited 1×
“The root cause of voltage overshoot is the stray inductance in the power loop [20], [21].”
BackgroundZhang, Z., Wang, F., Tolbert, L. M., Blalock, B. J., & Costinett, D. J. (2015) · 2015 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2015.7104437 · Cited by 62 · cited 1×
“is another solution to prevent Miller turn on [117].”
BackgroundDynamic $R_{\mathrm {ON}}$ of GaN-on-Si Lateral Power Devices With a Floating Substrate Termination
Tang, G., Wei, J., Zhang, Z., Tang, X., Hua, M., Wang, H., & Chen, K. J. (2017) · IEEE Electron Device Letters · doi:10.1109/led.2017.2707529 · Cited by 60
Jeon, J.-J., Seong, J., Lim, J., Kim, M. K., Kim, T., & Yoon, S. W. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.2998546 · Cited by 57 · cited 1×
“Sandwiched structures also pose a challenge to the mechanical reliability of the entire package, as there is a chance for the device to experience high stress-induced fatigue, due to CTE mismatch between different interfacing layers [99].”
BackgroundCross conduction analysis for enhancement-mode 650-V GaN HFETs in a phase-leg topology
Jones, E. A., Wang, F., Costinett, D. J., Zhang, Z., & Guo, B. (2015) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda.2015.7369256 · Cited by 56
Characterization and Modeling of a Gallium Nitride Power HEMT
Peng, K., Eskandari, S., & Santi, E. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2587766 · Cited by 51 · cited 1×
“quadrant behavior of the GaN HEMT and increases energy loss during the dead time period [116].”
BackgroundGallium Nitride Semiconductors in Power Electronics for Electric Vehicles: Advantages and Challenges
Letellier, A., Dubois, M. R., Trovao, J. P., & Maher, H. (2015) · 2015 IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2015.7352955 · Cited by 46 · cited 1×
“W ITH the advent of wide bandgap (WBG) semiconductor devices, high-speed efficient power conversion (EPC) is no longer a vision but a reality [1], [2], [3], [4].”
BackgroundNguyen, V.-S., Lefranc, P., & Crébier, J.-C. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2802204 · Cited by 46 · cited 1×
“The high dV/dt is also seen by the stray capacitances in the layout and isolation barrier capacitances of the gate driver and the power supply, which results in displacement current being generated, which propagates toward control circuitry [109], [110], [111].”
BackgroundIkeda, Y., Iizuka, Y., Hinata, Y., Horio, M., Hori, M., & Takahashi, Y. (2011) · IEEE International Symposium on Power Semiconductor Devices and ICs/Proceedings of the International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2011.5890843 · Cited by 45 · cited 1×
“Wire-bonded modules have other drawbacks, such as the requirement of additional bonding areas on the substrates to make interconnection paths and restricting the package to be planar [145].”
Background1200 V/650 V/160 A SiC+Si IGBT 3L Hybrid T-Type NPC Power Module With Enhanced EMI Shielding
Emon, A. I., Yuan, Z., Mirza, A. B., Deshpande, A., Hassan, M. U., & Luo, F. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3089578 · Cited by 45 · cited 1×
“can reroute this noise and prevent it from being injected into the ground, which is a smart solution to mitigate this interference problem [138].”
BackgroundSelf-citationComparison of 600V Si, SiC and GaN Power Devices
Chowdhury, S., Stum, Z., Li, Z. D., Ueno, K., & Chow, T. P. (2014) · Materials Science Forum · doi:10.4028/www.scientific.net/msf.778-780.971 · Cited by 44 · cited 1×
“Among them, silicon carbide (SiC) and gallium nitride (GaN) have superseded other candidates with their superior material properties and relevance to the application [5], [6].”
BackgroundGurpinar, E., Ozpineci, B., & Chowdhury, S. (2020) · Journal of Electronic Packaging · doi:10.1115/1.4047409 · Cited by 43 · cited 3×
“The insulated metal substrate (IMS) is a PCB built on a metal plate—normally aluminum—on which a special prepreg is applied, the primary qualities of which are five to ten times better heat dissipation compared to FR4 [35], but not as good as ceramic substrates.”
BackgroundInfluentialZhang, Z., Wang, F., Tolbert, L. M., Blalock, B. J., & Costinett, D. (2014) · 2014 IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda.2014.6964614 · Cited by 41
PCB-Embedded GaN-on-Si Half-Bridge and Driver ICs With On-Package Gate and DC-Link Capacitors
Moench, S., Reiner, R., Waltereit, P., Benkhelifa, F., Huckelheim, J., Meder, D., Zink, M., Kaden, T., Noll, S., Mansfeld, S., et al. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3005621 · Cited by 41 · cited 1×
“A PCB-embedded power module for GaN is reported in [88].”
MethodPassmore, B., Storkov, S., McGee, B., Stabach, J., Falling, G., Curbow, A., Killeen, P., Flint, T., Simco, D., Shaw, R., et al. (2015) · 2015 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7310298 · Cited by 40
Recent developments of direct bonded copper (DBC) substrates for power modules
Schulz-Harder, J., & Exel, K. (2003) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/eptc.2003.1298787 · Cited by 39
Fly ash-reinforced polypropylene composites
Pal, T., Pramanik, S., Verma, K. D., Naqvi, S. Z., Manna, P. K., & Kar, K. K. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-817686-3.00021-9 · Cited by 39 · cited 1×
“Flexural strength or bending strength is the mechanical parameter of material, which is defined as the material’s ability to resist deformation under load [150].”
BackgroundDynamic performances of GaN-HEMT on Si in cascode configuration
Hirose, T., Imai, M., Joshin, K., Watanabe, K., Ogino, T., Miyazaki, Y., Shono, K., Hosoda, T., & Asai, Y. (2014) · 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014 · doi:10.1109/apec.2014.6803306 · Cited by 38 · cited 1×
“It also has limitations in terms of switching speed and a higher reverse recovery loss [55].”
BackgroundA review of power cycle driven fatigue, aging, and failure modes for semiconductor power modules
Niu, H. (2017) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2017.8002341 · Cited by 38 · cited 1×
“Bond wire failure is one of the major modes of failure in power electronics packages [39].”
BackgroundTakahashi, K., Murata, Y., Tsubaki, Y., Fujiwara, T., Maniwa, H., & Uehara, N. (2018) · IEEE Transactions on Electromagnetic Compatibility · doi:10.1109/temc.2018.2870082 · Cited by 38 · cited 1×
“However, in a compact module with high power density, the crosstalk and induced near-field coupling noise from the power loop hamper the signal integrity of peripheral logic circuitry [24], [25].”
BackgroundAn Analytical Model for Predicting Turn-ON Overshoot in Normally-OFF GaN HEMTs
Kozak, J. P., Barchowsky, A., Hontz, M. R., Koganti, N. B., Stanchina, W. E., Reed, G. F., Mao, Z., & Khanna, R. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2947152 · Cited by 38
Haumann, S., Rudzki, J., Osterwald, F., Becker, M., & Eisele, R. (2013) · 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2013.6520275 · Cited by 34 · cited 1×
“However, the small cross-sectional area of the wire bond makes its thermal capacity low, which makes them prone to failure under heavy thermal cycling [152].”
BackgroundStacked DBC Cavitied Substrate for a 15-kV Half-bridge Power Module
Deshpande, A., Luo, F., Iradukunda, A., Huitink, D. R., & Boteler, L. M. (2019) · IEEE International Workshop on Integrated Power Packaging (IWIPP) · doi:10.1109/iwipp.2019.8799077 · Cited by 34
Self-citationThe Sustained Oscillation Modeling and Its Quantitative Suppression Methodology for GaN Devices
Chen, J., Luo, Q., Wei, Y., Zhang, X., & Du, X. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3043472 · Cited by 32 · cited 2×
“A careful section of the value of R and C based on the stability criterion has been shown to solve the sustained oscillation problem with a negligible increase in switching loss [132].”
BackgroundYoon, S. W., Shiozaki, K., Yasuda, S., & Glover, M. D. (2012) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2012.6165863 · Cited by 31
GaN Module Design Recommendations Based on the Analysis of a Commercial 3-Phase GaN Module
Brothers, J. A., & Beechner, T. L. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8913223 · Cited by 30 · cited 2×
“100-V/270-A three-phase GaN module [70].”
BackgroundGurpinar, E., Sahu, R., Ozpineci, B., & DeVoto, D. J. (2020) · IEEE Workshop on Wide Bandgap Power Devices and Applications in Asia (WiPDA Asia) · doi:10.1109/wipdaasia49671.2020.9360269 · Cited by 27 · cited 2×
“Using a similar technique, the Oak Ridge National Laboratory (ORNL) has achieved a vertical power loop using organic dielectric material from DuPont named Temprion [82], providing 164-kV/mm of dielectric strength, which is ten times higher than AlN and 15 times higher Si3N4, as shown in Fig.”
BackgroundMethodDesign and characterization of a 200 V, 45 A all-GaN HEMT-based power module
Chou, P.-C., & Cheng, S. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.07.004 · Cited by 26 · cited 2×
“In [71], a 200-V/45-A full-bridge power module is proposed using lateral GaN HEMT.”
BackgroundMethodHigh dv/dt Noise Modeling and Reduction on Control Circuits of GaN-Based Full Bridge Inverters
Meng, W., Zhang, F., Fu, Z., & Dong, G. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2903818 · Cited by 26 · cited 1×
“This distortion gets reflected and amplified in the gate driver output seen by the GaN HEMT, which can lead to spurious mistriggering events [112].”
BackgroundGlass for Encapsulating High-Temperature Power Modules
Liu, L., Nam, D., Guo, B., Ewanchuk, J., Burgos, R. P., & Lu, G. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3004021 · Cited by 26 · cited 2×
“However, it has been reported that there is no polymeric encapsulant that can survive 250 ◦C for >10 000 h [160].”
BackgroundLu, L., Liu, G., & Bai, K. (2017) · CES Transactions on Electrical Machines and Systems · doi:10.23919/tems.2017.8086107 · Cited by 26
Applying GaN HEMTs in Conventional Housing-Type Power Modules
Kou, L., & Lu, J. (2020) · 2020 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9236281 · Cited by 26 · cited 2×
“GaN Systems has proposed a U-type housing [73], where the middle portion of the package has a recess, as shown in Fig.”
BackgroundUltra-low inductance phase leg design for GaN-based three-phase motor drive systems
Zhang, X., Haryani, N., Shen, Z., Burgos, R. P., & Boroyevich, D. (2015) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda.2015.7369314 · Cited by 25
A Comprehensive Investigation on Short-Circuit Oscillation of p-GaN HEMTs
Xue, P., Maresca, L., Riccio, M., Breglio, G., & Irace, A. (2020) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2020.3022614 · Cited by 25 · cited 9×
“Common baseplate materials are AlSiC, Cu, and Al.”
BackgroundInfluentialZhang, X., Shen, Z., Haryani, N., Boroyevich, D., & Burgos, R. P. (2016) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2016.7468075 · Cited by 24
Review and Characterization of Gallium Nitride Power Devices
Jones, E. A. (2016) · Cited by 24
Zhang, Z. (2015) · Cited by 23
Joshi, R., Granada, H. T., & Tangpuz, C. (2002) · IEEE Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc.2000.853280 · Cited by 22 · cited 1×
“In 2000, ball grid array (BGA) technology was introduced by Fairchild Semiconductor [57].”
MethodEndurance of Thin Insulation Polyimide Films for High-Temperature Power Module Applications
Khazaka, R., Locatelli, M., Diaham, S., & Bidan, P. (2013) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2013.2249559 · Cited by 21 · cited 1×
“There are also articles reporting other high-temperature polymeric encapsulation materials, including polyimide [162], perylene HT [163], phthalonitrile [164], and polymer-filler composites [165].”
BackgroundSwitching transient analysis and characterization of GaN HEMT
Sun, B., Zhang, Z., & Andersen, M. A. E. (2018) · International Conference on Intelligent Green Building and Smart Grid · doi:10.1109/igbsg.2018.8393542 · Cited by 21 · cited 1×
“The lower margin of gate voltage tolerance and the smaller threshold voltage of GaN make it more susceptible to these immunity issues [26].”
BackgroundCopper ribbon bonding for power electronics applications
Marenco, N., Kontek, M., Reinert, W. H., Lingner, J., & Poech, M.-H. (2014) · Publikationsdatenbank der Fraunhofer-Gesellschaft (Fraunhofer-Gesellschaft) · Cited by 20
Thermal characterization of Insulated Metal Substrates with a power test chip
Jordà, X., Perpiñà, X., Vellvehi, M., Millan, J., & Ferriz, A. (2009) · IEEE International Symposium on Power Semiconductor Devices and ICs/Proceedings of the International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2009.5158029 · Cited by 20 · cited 1×
“is mostly a single layer, specially built for better thermal performance, and is often loaded with a heavy aluminum or copper layer on the bottom side [83], [84].”
BackgroundSun, B., Burgos, R. P., Haryani, N., Bala, S., & Xu, J. (2017) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2017.8216185 · Cited by 20 · cited 4×
“Other than quasi-common source inductance, leakage current through transfer capacitance (Cgd) can cause circulating current in the paralleled device even during turn on [128].”
BackgroundInfluentialThick Printed Copper as Highly Reliable Substrate Technology for Power Electronics
Gundel, P., Bawohl, M., Challingsworth, M., Choisi, M., García, V., Gaul, M., Kersken, K., Modes, C., Nikolaidis, I., Persons, R., et al. (2015) · PCIM Europe: International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe) · Cited by 19
PCB Embedded Power Electronics for Low Voltage Applications
Kearney, D. J., Kicin, S., Bianda, E., Krivda, A., & Bauman, D. E. (2016) · Cited by 19
A 3-D stacked wire bondless silicon carbide power module
Dutta, A., & Ang, S. S. (2016) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda.2016.7799902 · Cited by 18
Paralleling 650 V/ 60 A GaN HEMTs for high power high efficiency applications
Haryani, N., Wang, J., & Burgos, R. P. (2017) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8096649 · Cited by 18 · cited 1×
“The application of Schottky diodes in series in both paths seals this path and mitigates the ringing [129].”
Background10 kW High Efficiency Compact GaN-Based DC/DC Converter Design
Sun, B., Burgos, R. P., Boroyevich, D., Bala, S., & Xu, J. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8557541 · Cited by 17 · cited 1×
“Among them, silicon carbide (SiC) and gallium nitride (GaN) have superseded other candidates with their superior material properties and relevance to the application [5], [6].”
BackgroundPackaging material issues in high temperature power electronics
Boettge, B., Naumann, F., Klengel, R., Klengel, S., & Petzold, M. (2013) · Publikationsdatenbank der Fraunhofer-Gesellschaft (Fraunhofer-Gesellschaft) · Cited by 17
Assessment of dielectric encapsulation for high temperature high voltage modules
Khazaka, R., Mendizabal, L., Henry, D., Hanna, R., & Lesaint, O. (2015) · IEEE Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc.2015.7159862 · Cited by 16 · cited 1×
“Conditions of concern include moisture, solvents, gases, and radiation [46], [47].”
BackgroundYan, Y. T., Zhu, L., Walden, J., Liang, Z., Bai, H. K., & Kao, M. H. (2021) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec42165.2021.9487427 · Cited by 16 · cited 3×
“used in a PCB/DBC hybrid package in [94].”
MethodMP-A4 GaAs MOSFET for low-power high-speed logic applications
Mimura, T., Yokoyama, N., Kusakawa, H., Suyama, K., & Fukuta, M. (1979) · IEEE Transactions on Electron Devices · doi:10.1109/t-ed.1979.19701 · Cited by 15
Haryani, N., Zhang, X., Burgos, R. P., & Boroyevich, D. (2016) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2016.7467996 · Cited by 15 · cited 1×
“ing the mutual cancellation of magnetic fields generated by current passing in opposite directions in adjacent layers [75],”
BackgroundChristine, L., Delaine, J., Perichon, P., Thollin, B., Lanneluc, C., Izoulet, A., Manon, P., Escoffier, R., Brun, J., & Favre, J. (2020) · IEEE Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc32862.2020.00222 · Cited by 14 · cited 2×
“DSC module with the copper ball as interconnect [98].”
BackgroundNoise Immune Cascaded Gate Driver Solution for Driving High Speed GaN Power Devices
Mirza, A. B., Emon, A. I., Vala, S. S., & Luo, F. (2021) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce47101.2021.9595515 · Cited by 14 · cited 1×
“Introducing EMI filters in the primary side of the gate driver, impedance matching the signal and return lines to prevent CM to DM mode conversion, and cascaded stages of isolated power supply/gate driver ICs to increase the impedance of noise propagation paths are some of the identified solutions to address this prob…”
BackgroundSelf-citationAL-SIC IMPROVES RELIABILITY OF IGBT POWER MODULES
Lefranc, G., Degischer, H. P., Sommer, K. H., & Mitic, G. (1999) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.15418966 · Cited by 14
A 650V/60A Gate Driver Integrated Wire-bondless Multichip GaN Module
Emon, A. I., Carlton, H., Harris, J., Krone, A., Hassan, M. U., Mirza, A. B., Yuan, Z., Huitink, D. R., & Luo, F. L. (2021) · IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg51384.2021.9494257 · Cited by 13 · cited 2×
“In [92], another PCB/DBC hybrid half-bridge gate driver integrated module is reported for 650-V/60-A applications using the same Easy 1B package.”
MethodSelf-citationElectric Characteristics of Planar Interconnect Technologies for Power MOSFETs
Dieckerhoff, S., Kirfe, T., Wernicke, T., Kallmayer, C., Ostmann, A., Jung, E., Wunderle, B., & Reichl, H. (2007) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2007.4342134 · Cited by 12 · cited 1×
“Fraunhofer IZM and TU Berlin worked together to develop a chip in a polymer package [59], [60], [61] capable of”
BackgroundAnalysis and evaluation of near field noise voltage on power electronics circuits
Ariga, Z., & Wãda, K. (2009) · International Conference on Power Electronics and Drive Systems · doi:10.1109/peds.2009.5385836 · Cited by 12 · cited 1×
“However, in a compact module with high power density, the crosstalk and induced near-field coupling noise from the power loop hamper the signal integrity of peripheral logic circuitry [24], [25].”
BackgroundAlGaN/GaN HEMTs grown by molecular beam epitaxy on sapphire, SiC, and HVPE GaN templates
Weimann, N. G., Manfra, M. J., Hsu, J. W. P., Baldwin, K. W., Pfeiffer, L. N., West, K. W., Chu, S. N. G., Lang, D. V., & Molnar, R. J. (2003) · IEEE Lester Eastman Conference on High Performance Devices · doi:10.1109/lechpd.2002.1146740 · Cited by 11 · cited 2×
“Planar power loops in traditional wire-bonded modules exhibit higher stray inductances (>10 nH) compared to the advanced power module with vertical power loops [11].”
BackgroundYang, S.-S., Soh, J., & Kim, R.-Y. (2019) · IEEE International Future Energy Electronics Conference (IFEEC) · doi:10.1109/ifeec47410.2019.9014921 · Cited by 11
Design and Optimization of 650V/60A Double-Sided Cooled Multichip GaN Module
Emon, A. I., Carlton, H., Harris, J., Krone, A., Mirza, A., Hassan, M., Yuan, Z., Huitink, D., & Luo, F. (2021) · 2021 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec42165.2021.9487307 · Cited by 11 · cited 2×
“In [97], a 650-V/60-A gate driver integrated, half-bridge, 3-D GaN module is presented where the module has two”
BackgroundSelf-citationChip-in-polymer: volumetric packaging solution using PCB technology
Jung, E., Wojakowski, D., Neumann, A., Landesberger, C., Ostmann, A., Aschenbrenner, R., & Reichl, H. (2003) · IEEE/CPMT International Electronics Manufacturing Technology Symposium · doi:10.1109/iemt.2002.1032721 · Cited by 10 · cited 1×
“Fraunhofer IZM and TU Berlin worked together to develop a chip in a polymer package [59], [60], [61] capable of”
BackgroundStrategies for Embedding of Active Components
Ostmann, A., Manessis, D., Loeher, T., Neumann, A., & Reichl, H. (2006) · International Microsystems, Packaging, Assembly and Circuits Technology Conference · doi:10.1109/impact.2006.312182 · Cited by 10 · cited 1×
“Fraunhofer IZM and TU Berlin worked together to develop a chip in a polymer package [59], [60], [61] capable of”
BackgroundPackaging of (650 V, 150 A) GaN HEMT with Low Parasitics and High Thermal Performance
Lu, S., Zhao, T., Burgos, R. P., & Lu, G. (2021) · International Conference on Electronics Packaging (ICEP) · doi:10.23919/icep51988.2021.9451865 · Cited by 10 · cited 5×
“CPES has presented a package using a metal connection and stack-die structure for 650-”
BackgroundInfluentialHigh-temperature endurable encapsulation material
Chidambaram, V., Yeung, H. B., Chan, Y. S., & Woo, D. R. M. (2012) · IEEE Electronics Packaging Technology Conference (EPTC) · doi:10.1109/eptc.2012.6507052 · Cited by 9 · cited 1×
“Among polymers, benzocyclobutene (BCB) is a good option and stable at temperatures above 300 ◦C, but a major issue encountered with it is void generation during the curing process [48].”
BackgroundImplementation of a new thermal path within the structure of inorganic encapsulated power modules
Behrendt, S., Eisele, R., Scheibel, M. G., & Kaessner, S. (2019) · Microelectronics Reliability · doi:10.1016/j.microrel.2019.113430 · Cited by 9 · cited 1×
“low thermal conductivity, inorganic materials, such as ceramics, are being investigated [49].”
BackgroundKumar, R. R., Ke, F., Summers, A., & Young, L. (2016) · International Spring Seminar on Electronics Technology · doi:10.1109/isse.2016.7563174 · Cited by 8 · cited 1×
“There are also articles reporting other high-temperature polymeric encapsulation materials, including polyimide [162], perylene HT [163], phthalonitrile [164], and polymer-filler composites [165].”
BackgroundEl-Sharkh, M. Y., & Wang, S. (2019) · IEEE International Symposium on Electromagnetic Compatibility · doi:10.1109/isemc.2019.8825234 · Cited by 7 · cited 1×
“a buck chopper has been tested, while the semiconductors are interchanged between Si and GaN [137].”
Design of a GaN HEMT based inverter leg power module for aeronautic applications
Thollin, B., Zaki, F., Khatir, Z., Meuret, R., Martineau, D., Fita, C., Jeannin, P., Delaine, J., Lefranc, P., Mendizabal, L., et al. (2016) · Electronic System-Integration Technology Conference (ESTC) · doi:10.1109/estc.2016.7764473 · Cited by 6 · cited 2×
“Integrated EMI filter in the GaN module [140].”
BackgroundMethodZhang, Y., Belov, I., Bakowski, M., Lim, J., Leisner, P., & Nee, H. (2014) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/eurosime.2014.6813817 · Cited by 5
Thermal Performance and Reliability of Copper Thick Film Substrates
Gundel, P., Nowak, T., Bawohl, M., Challingsworth, M., Czwickla, C., García, V., Nikolaidis, I., Modes, C., Persons, R., Reitz, J., et al. (2016) · Publikationsdatenbank der Fraunhofer-Gesellschaft (Fraunhofer-Gesellschaft) · Cited by 5
Degradation mechanism of Ag-epoxy conductive adhesive joints by heat and humidity exposure
Kim, S. S., Kim, K., Suganuma, K., & Tanaka, H. (2008) · Electronic System-Integration Technology Conference (ESTC) · doi:10.1109/estc.2008.4684472 · Cited by 4
Over-current Suppression for Parallel Connected GaN HEMTs
Wong, Z.-B., Chen, Y.-M., & Hsu, C.-C. (2019) · IEEE Workshop on Wide Bandgap Power Devices and Applications in Asia (WiPDA Asia) · doi:10.1109/wipdaasia.2019.8760315 · Cited by 3 · cited 1×
“In the steady-state region, self-balancing occurs as the device channel resistance rises in the device that is taking more current [121].”
BackgroundHigh Power GaN Module Using 3D-Printed Liquid Coolers for Hard-Switching at Megahertz
Weiler, B., Vermulst, B. J. D., Lemmen, E., & Wijnands, C. G. E. (2021) · TU/e Research Portal · Cited by 3
Synthesis, Processing, and Properties of Silicon-Containing Phthalonitrile Resins
Monzel, W. J. (2019) · VTechWorks (Virginia Tech) · Cited by 2
Design and Test of a GaN Flying Capacitor Power Module
Quan, Z., Lu, J. L., & Li, Y. (2020) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc-ecceasia48364.2020.9367951 · Cited by 1 · cited 3×
“A few more designs are proposed in [72] to reduce the commutation loop inductance but have not been built or tested.”
BackgroundMethod
Research works printed but not linked: 29
- brohlin, 2018, Direct-drive configuration for GAN devices (rev A)—Texas Instruments
- 2023, Using Enhancement Mode GaN-on-Silicon Power FETs (eGaN? FETs)
- massiot, 1997, BASEPLATES in metallic matrix composites for power and microwave, Proc Workshop Metal Ceram Mater Funct Appl, 145
- ueda, 2010, Simple, compact, robust and high-performance power module T-PM (transfer-molded power module), Proc IEEE 22nd ISPSD, 47
- 2019, Heraeus Electronics—Die Top System (DTS)
- tong, 2014, DPC (Direct Plated Copper) Metallized Ceramic
- diaham, 2011, Dielectrics for High Temperature SiC Device Isulation Review of New Polymeric and Ceramic Materials
- 1986, Solder Alloy Data Mechanical Properties of Solders and Soldered Joints, 60
- zhang, 2005, Processing and characterization of micro-scale and nanoscale silver paste for power semiconductor device attachment
- castro, 2016, Application requirements for automotive power modules, Proc SIA APE, 1
- khan, 1993, High electron mobility transistor based on a GaN-AlxGa1-xN heterojunction, Appl Phys Lett, 65, 1121
- rosina, 2018, GaN and SiC power device: Market overview, Eur Semiconduct
- 2018, Paralleled GaN Transistors Boost Converter Power Up to 100kW
- 2022, LMG2610 Integrated 650-V GaN Half Bridge for Active-Clamp Flyback Converters Datasheet (Rev A)
- 2021, N-Channel 1200V30A GaN Power HEMT in TO263-5L Package
- 2023, Industry’s First 1200V Half Bridge Module Based on GaN Technology
- 2023, Datenblatt/Datasheet FP10R12W1T7 B11—Farnell
- 2023, High Power IMS Evaluation Platform—GaN Systems
- 2023, GN011 Application Note Soldering Recommendations for GaNPX Packaged Devices
- 2023, GaN Systems GS66516T datasheet
- wang, 0, Wide bandgap device characterization
- 2012, Design Fundamentals of Implementing an Isolated Half-Bridge Gate Driver
- 2021, GS-EVM-3PH-650V300A-SM1 Evaluation Board
- 2022, GS-EVM-HB-650V150A-SP1 Evaluation Board
- flaherty, 2019, GaN systems claims world’s highest current GaN power chip
- 2022, GS-EVM-HB-650V150A-SP1 Evaluation Board
- 2023, Gallium Nitride (GaN) ICs and Semiconductors
- roberts, 2015, Maximizing GaN power transistor performance with embedded packaging, Proc APEC, 1
- 2023, Gate Driver Design With GaN e-HEMTS—GaN Systems
Cited by
Overview of Wide/Ultrawide Bandgap Power Semiconductor Devices for Distributed Energy Resources
Mazumder, S. K., Voss, L. F., Dowling, K. M., Conway, A. M., Hall, D., Kaplar, R., Pickrell, G. W., Flicker, J., Binder, A. T., Chowdhury, S., et al. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3277828 · Cited by 98
“literature [96], [97] and hence not repeated here.”
BackgroundSelf-citationA Review of GaN HEMT Dynamic On-Resistance and Dynamic Stress Effects on Field Distribution
Gill, L., DasGupta, S., Neely, J. C., Kaplar, R. J., & Michaels, A. J. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3318182 · Cited by 68
A Review of Recent Trends in High-Efficiency Induction Motor Drives
Azab, M. A. (2025) · Vehicles · doi:10.3390/vehicles7010015 · Cited by 70
“Ref.”
Parasitic Capacitive Couplings in Medium Voltage Power Electronic Systems: An Overview
Kjærsgaard, B. F., Liu, G., Nielsen, M. R., Wang, R., Dalal, D. N., Aunsborg, T. S., Jørgensen, J. K., Yan, Z., Jacobsen, J., Wu, R. L., et al. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3269582 · Cited by 55
“and higher switching frequencies will likewise benefit the total efficiency and power density of the PEC system [77], [78], thus, significantly increasing the complexity of evaluating the”
BackgroundRecent Developments, Reliability Issues, Challenges and Applications of GaN HEMT Technology
Garg, T., & Kale, S. (2024) · IEEE electron devices reviews. · doi:10.1109/edr.2024.3491716 · Cited by 55
“For instance, combining advanced lithography techniques with optimized doping profiles has been underex-plored, yet it could be key to overcoming short-channel effects at smaller dimensions [93], [94], [95], [96], [97].”
Metadata
- Authors
- Emon, A. I., Mustafeez-ul-Hassan, Mirza, A. B., Kaplun, J., Vala, S. S., & Luo, F.
- Affiliations
- Stony Brook University (US)
- Department of Electrical and Computer Engineering, Stony Brook University, Stony Brook, NY, USA
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2023-06
- Volume
- 11
- Issue
- 3
- Pages
- 2707-2729
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W4312580613
- Cited by
- 151
- References
- 142
- Citations by year
- 2026: 41 · 2025: 57 · 2024: 36 · 2023: 17
- FWCI
- 10.28
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Journal of Emerging and Selected Topics in Power Electronics (publishedVersion)
- Funders
- National Science Foundation (1846917)
- Topics
- Physical Sciences › Physics and Astronomy › Condensed Matter Physics › GaN-based semiconductor devices and materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Ga2O3 and related materials
- Keywords
- gallium nitride, GaN HEMT, power module packaging, wide bandgap devices, hard switching, voltage overshoot, electromagnetic interference, module integration, power module reliability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.