The DOI matches its Crossref record; 125 of the 135 references it cites were found in a registry or an index.
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Open accessAbstract
Condition monitoring (CM) has already been proven to be a cost effective means of enhancing reliability and improving customer service in power equipment, such as transformers and rotating electrical machinery. CM for power semiconductor devices in power electronic converters is at a more embryonic stage; however, as progress is made in understanding semiconductor device failure modes, appropriate sensor technologies, and signal processing techniques, this situation will rapidly improve. This technical review is carried out with the aim of describing the current state of the art in CM research for power electronics. Reliability models for power electronics, including dominant failure mechanisms of devices are described first. This is followed by a description of recently proposed CM techniques. The benefits and limitations of these techniques are then discussed. It is intended that this review will provide the basis for future developments in power electronics CM.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“According to [238], [239], power semiconductor device damages account for approximately 35% of all ASD faults.”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [238]
Citations
Cites
Physics of Semiconductor Devices
Sze, S. M., & Ng, K. K. (2006) · doi:10.1002/0470068329 · Cited by 14,627
Physics of Semiconductor Devices
Colinge, J.-P., & Colinge, C. (2002) · Kluwer Academic Publishers eBooks · doi:10.1007/b117561 · Cited by 14,074
A Critical Analysis of Crack Propagation Laws
Paris, P. C., & Erdoğan, F. (1963) · Journal of Basic Engineering · doi:10.1115/1.3656900 · Cited by 7,168
Power electronics converters, applications and design
Robinson, F. V. P. (1997) · Microelectronics Journal · doi:10.1016/s0026-2692(97)87859-7 · Cited by 5,100
Power Electronics: Converters, Applications and Design
Mohan, N., Undeland, T. M., & Robbins, W. P. (1989) · Cited by 4,781
Fundamentals of Power Semiconductor Devices
Baliga, B. J. (2008) · Springer eBooks · doi:10.1007/978-0-387-47314-7 · Cited by 2,241
An Industry-Based Survey of Reliability in Power Electronic Converters
Yang, S., Bryant, A. T., Mawby, P., Xiang, D., Ran, L., & Tavner, P. J. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2124436 · Cited by 2,058
Self-citationSelected failure mechanisms of modern power modules
Ciappa, M. (2002) · Microelectronics Reliability · doi:10.1016/s0026-2714(02)00042-2 · Cited by 1,039
Power Electronics: Converters, Applications, and Design
Mohan (2007) · Cited by 1,022
(2002) · Elsevier eBooks · doi:10.1016/c2016-0-00847-1 · Cited by 940
Research works printed but not linked: 10
- grant, 1989, Power MOSFET-Theory and Applications
- scheuermann, 2002, power cycling lifetime of advanced power modules for different temperature swings, Proc Power Convers Intell Motion, 59
- mermet-guyennet, 2008, Reliability requirement for traction power converters, ECPE Workshop Built-in Rel Power Electron Syst
- wolfgang, 2007, Examples for failures in power electronics systems, ECPE Tutorial Rel Power Electron Syst
- fratelli, 1999, reliability test of power igbt's for railway traction, Proc Eur Conf Power Electron Appl
- ramminger, 2006, predicting the crack progression in pbsnag-solder under cyclic loading conditions, Int Conf Integr Power Syst
- agyakwa, 2008, anomalous reliability behaviour of 99.99% and 99.999% pure aluminium wire bonds under thermal cycling, Proc IMAPS 41st Int Symp Microelectron
- dunipace, 2008, test saturation voltage to achieve high efficiency, Power Electron Technol, 32
- coquery, 1999, reliability improvement of the soldering thermal fatigue with alsic technology on traction high-power igbt modules, Proc Eur Conf Power Electron Appl
- 10.1109/63.704154 · DOI
Cited by
Sorted by citations
An Industry-Based Survey of Reliability in Power Electronic Converters
Yang, S., Bryant, A. T., Mawby, P., Xiang, D., Ran, L., & Tavner, P. J. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2124436 · Cited by 2,058
Self-citationPower Electronics Converters for Wind Turbine Systems
Blaabjerg, F., Liserre, M., & Ma, K. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2181290 · Cited by 923
Toward Reliable Power Electronics: Challenges, Design Tools, and Opportunities
Wang, H., Liserre, M., & Blaabjerg, F. (2013) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2252958 · Cited by 919
An Overview of Artificial Intelligence Applications for Power Electronics
Zhao, S., Blaabjerg, F., & Wang, H. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3024914 · Cited by 947
Future on Power Electronics for Wind Turbine Systems
Blaabjerg, F., & Ma, K. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2275978 · Cited by 860
Study and Handling Methods of Power IGBT Module Failures in Power Electronic Converter Systems
Choi, U., Blaabjerg, F., & Lee, K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2373390 · Cited by 700
Transitioning to Physics-of-Failure as a Reliability Driver in Power Electronics
Wang, H., Liserre, M., Blaabjerg, F., de Place Rimmen, P., Jacobsen, J. B., Kvisgaard, T., & Landkildehus, J. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2290282 · Cited by 693
Nanoengineered materials for liquid–vapour phase-change heat transfer
Cho, H. J., Preston, D. J., Zhu, Y.-Y., & Wang, E. N. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.92 · Cited by 622
A Survey on Wind Turbine Condition Monitoring and Fault Diagnosis—Part I: Components and Subsystems
Qiao, W., & Lu, D. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2422112 · Cited by 537
Oh, H., Han, B., McCluskey, P., Han, C., & Youn, B. D. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2346485 · Cited by 515
Wind turbine condition monitoring: technical and commercial challenges
Yang, W., Tavner, P., Crabtree, C., Feng, Y., & Qiu, Y. (2012) · Wind Energy · doi:10.1002/we.1508 · Cited by 477
Self-citationA Digital Twin Approach for Fault Diagnosis in Distributed Photovoltaic Systems
Jain, P., Poon, J., Singh, J. P., Spanos, C. J., Sanders, S. R., & Panda, S. K. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2911594 · Cited by 464
Estima, J. O., & Marques Cardoso, A. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2188877 · Cited by 377
Ji, B., Pickert, V., Cao, W., & Zahawi, B. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2251358 · Cited by 330
Design for reliability of power electronic systems
Wang, H., Ma, K., & Blaabjerg, F. (2012) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2012.6388833 · Cited by 325
A Digital Twin Based Estimation Method for Health Indicators of DC–DC Converters
Peng, Y., Zhao, S., & Wang, H. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3009600 · Cited by 309
A New Approach for Real-Time Multiple Open-Circuit Fault Diagnosis in Voltage-Source Inverters
Estima, J. O., & Cardoso, A. J. M. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2168800 · Cited by 299
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
“According to [238], [239], power semiconductor device damages account for approximately 35% of all ASD faults.”
BackgroundA Review of the Condition Monitoring of Capacitors in Power Electronic Converters
Soliman, H., Wang, H., & Blaabjerg, F. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2591906 · Cited by 285
Jlassi, I., Estima, J. O., El Khil, S. K., Bellaaj, N. M., & Cardoso, A. J. M. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2616398 · Cited by 284
Open-Circuit Fault Diagnosis in PMSG Drives for Wind Turbine Applications
Freire, N. M. A., Estima, J. O., & Cardoso, A. J. M. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2207655 · Cited by 278
Hanif, A., Yu, Y., DeVoto, D., & Khan, F. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2860587 · Cited by 272
Recent advances in prognostics and health management for advanced manufacturing paradigms
Xia, T., Dong, Y., Xiao, L., Du, S., Pan, E., & Xi, L. (2018) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2018.06.021 · Cited by 270
Reliability Improvement of a T-Type Three-Level Inverter With Fault-Tolerant Control Strategy
Choi, U., Blaabjerg, F., & Lee, K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2325891 · Cited by 259
Overview of Real-Time Lifetime Prediction and Extension for SiC Power Converters
Ni, Z., Lyu, X., Yadav, O. P., Singh, B. N., Zheng, S., & Cao, D. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2962503 · Cited by 261
An Overview of Condition Monitoring Techniques for Capacitors in DC-Link Applications
Zhao, Z., Davari, P., Lu, W., Wang, H., & Blaabjerg, F. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3023469 · Cited by 253
Open-Circuit Fault Diagnosis and Fault-Tolerant Control for a Grid-Connected NPC Inverter
Choi, U., Lee, J.-S., Blaabjerg, F., & Lee, K. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2510224 · Cited by 252
Choi, U., Blaabjerg, F., & Jorgensen, S. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2690500 · Cited by 249
A Review on IGBT Module Failure Modes and Lifetime Testing
Abuelnaga, A. H., Narimani, M., & Bahman, A. S. (2021) · IEEE Access · doi:10.1109/access.2021.3049738 · Cited by 247
Investigation Into IGBT dV/dt During Turn-Off and Its Temperature Dependence
Bryant, A. T., Yang, S., Mawby, P., Xiang, D., Ran, L., Tavner, P. J., & Palmer, P. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2125803 · Cited by 236
Self-citationSmet, V., Forest, F., Huselstein, J.-J., Rashed, A., & Richardeau, F. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2196894 · Cited by 232
Catastrophic failure and fault-tolerant design of IGBT power electronic converters - an overview
Wu, R. L., Blaabjerg, F., Wang, H., Liserre, M., & Iannuzzo, F. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6699187 · Cited by 234
Improved Reliability of Power Modules: A Review of Online Junction Temperature Measurement Methods
Baker, N., Liserre, M., Dupont, L., & Avenas, Y. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2014.2312427 · Cited by 232
Design Optimization of Transformerless Grid-Connected PV Inverters Including Reliability
Koutroulis, E., & Blaabjerg, F. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2198670 · Cited by 214
Jlassi, I., Estima, J. O., Khojet El Khil, S., Mrabet Bellaaj, N., & Marques Cardoso, A. J. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2342506 · Cited by 212
Catalán, P., Wang, Y., Arza, J., & Chen, Z. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3234221 · Cited by 201
Advanced Accelerated Power Cycling Test for Reliability Investigation of Power Device Modules
Choi, U.-M., Joergensen, S., & Blaabjerg, F. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2521899 · Cited by 200
Nguyen, N. K., Meinguet, F., Semail, E., & Kestelyn, X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2386299 · Cited by 193
Monitoring Solder Fatigue in a Power Module Using Case-Above-Ambient Temperature Rise
Xiang, D., Ran, L., Tavner, P., Bryant, A. T., Yang, S., & Mawby, P. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2168556 · Cited by 193
Self-citationAn avalanche-and-surge robust ultrawide-bandgap heterojunction for power electronics
Zhou, F., Gong, H., Xiao, M., Ma, Y., Wang, Z., Yu, X., Li, L., Fu, L., Tan, H. H., Yang, Y. T., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-40194-0 · Cited by 195
Gou, B., Ge, X., Wang, S., Feng, X., Kuo, J. B., & Habetler, T. G. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2465299 · Cited by 191
State Detection of Bond Wires in IGBT Modules Using Eddy Current Pulsed Thermography
Li, K., Tian, G. Y., Cheng, L., Yin, A., Cao, W., & Crichton, S. O. J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2288334 · Cited by 189
Dorn-Gomba, L., Ramoul, J., Reimers, J., & Emadi, A. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3006045 · Cited by 193
Wu, F., & Zhao, J. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2422131 · Cited by 182
Application of Kalman Filter to Estimate Junction Temperature in IGBT Power Modules
Eleffendi, M. A., & Johnson, C. M. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2418711 · Cited by 176
Condition Monitoring Power Module Solder Fatigue Using Inverter Harmonic Identification
Xiang, D., Ran, L., Tavner, P., Yang, S., Bryant, A. T., & Mawby, P. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160988 · Cited by 174
Self-citationReal-Time Measurement of Temperature Sensitive Electrical Parameters in SiC Power MOSFETs
Griffo, A., Wang, J., Colombage, K., & Kamel, T. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2739687 · Cited by 175
Caseiro, L. M. A., & Mendes, A. M. S. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2341558 · Cited by 171
Musallam, M., Yin, C., Bailey, C., & Johnson, M. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2358555 · Cited by 168
Freire, N. M. A., Estima, J. O., & Cardoso, A. J. M. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2279383 · Cited by 167
Düşmez, S., Duran, H., & Akin, B. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2518127 · Cited by 167
An industry-based survey of reliability in power electronic converters
Yang, S., Bryant, A. T., Mawby, P., Xiang, D., Ran, L., & Tavner, P. J. (2009) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2009.5316356 · Cited by 161
Self-citationOptimal Control of Traction Motor Drives Under Electrothermal Constraints
Lemmens, J., Vanassche, P., & Driesen, J. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2299765 · Cited by 158
Ji, B., Song, X., Sciberras, E. A., Cao, W., Hu, Y., & Pickert, V. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2365531 · Cited by 149
Power electronics - the key technology for renewable energy system integration
Blaabjerg, F., Yang, Y., Ma, K., & Wang, X. (2015) · 2015 International Conference on Renewable Energy Research and Applications (ICRERA) · doi:10.1109/icrera.2015.7418680 · Cited by 148
An Investigation of Temperature-Sensitive Electrical Parameters for SiC Power MOSFETs
Gonzalez, J. A. O., Alatise, O. M., Ji, H., Ran, L., & Mawby, P. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2631447 · Cited by 148
Self-citationReal-Time Aging Monitoring for IGBT Modules Using Case Temperature
Wang, Z., Tian, B., Qiao, W., & Qu, L. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2497665 · Cited by 145
Toward Physics-Informed Machine-Learning-Based Predictive Maintenance for Power Converters—A Review
Fassi, Y., Heiries, V., Boutet, J., & Boisseau, S. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3328438 · Cited by 150
Xu, Z., Xu, F., & Wang, F. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2374575 · Cited by 142
Design for Reliability of Power Electronics for Grid-Connected Photovoltaic Systems
Yang, Y., Sangwongwanich, A., & Blaabjerg, F. (2016) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2016.00009 · Cited by 140
Kausar, A. (2019) · Journal of Plastic Film & Sheeting · doi:10.1177/8756087919849459 · Cited by 139
Low Stress Cycle Effect in IGBT Power Module Die-Attach Lifetime Modeling
Lai, W., Chen, M., Ran, L., Alatise, O. M., Xu, S., & Mawby, P. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2501540 · Cited by 134
Self-citationOnline Condition Monitoring of Power MOSFET Gate Oxide Degradation Based on Miller Platform Voltage
Ye, X., Chen, C., Wang, Y., Zhai, G., & Vachtsevanos, G. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2602323 · Cited by 129
Aging Mechanisms and Accelerated Lifetime Tests for SiC MOSFETs: An Overview
Pu, S., Yang, F., Vankayalapati, B. T., & Akin, B. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3110476 · Cited by 142
Gong, W., Chen, H., Zhang, Z., Zhang, M., & Gao, H. (2020) · IEEE Access · doi:10.1109/access.2020.2988323 · Cited by 130
Time-Series Classification Methods: Review and Applications to Power Systems Data
Susto, G. A., Cenedese, A., & Terzi, M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-811968-6.00009-7 · Cited by 132
Rainflow Algorithm-Based Lifetime Estimation of Power Semiconductors in Utility Applications
Reddy, L. G., Tolbert, L. M., Ozpineci, B., & Pinto, J. O. P. (2015) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2015.2407055 · Cited by 124
A New Complete Condition Monitoring Method for SiC Power MOSFETs
Ugur, E., Xu, C., Yang, F., Pu, S., & Akin, B. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2970668 · Cited by 126
Improving Power Converter Reliability: Online Monitoring of High-Power IGBT Modules
Ghimire, P., de Vega, A. R., Bęczkowski, S., Rannestad, B., Munk‐Nielsen, S., & Thøgersen, P. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2014.2311829 · Cited by 123
Xu, S., Huang, W., Wang, H., Zheng, W. X., Wang, J., Chai, Y., & Ma, M. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3200721 · Cited by 121
Power electronics and reliability in renewable energy systems
Blaabjerg, F., Ma, K., & Zhou, D. (2012) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2012.6237053 · Cited by 120
Recent advances in fault diagnosis by Park's vector approach
Estima, J. O., Freire, N. M. A., & Cardoso, A. J. M. (2013) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd.2013.6525187 · Cited by 120
Smart Inverters for Microgrid Applications: A Review
Arbab-Zavar, B., García, E. J., Vásquez, J. C., & Guerrero, J. M. (2019) · Energies · doi:10.3390/en12050840 · Cited by 120
Yang, C., Gui, W., Chen, Z., Zhang, J., Peng, T., Yang, C., Karimi, H. R., & Ding, S. X. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2924487 · Cited by 118
Recent Advances in Fault Diagnosis Techniques for Photovoltaic Systems: A Critical Review
Yang, B. F., Zheng, R., Han, Y., Huang, J., Li, M., Shu, H., Shi, S., & Guo, Z. (2024) · Protection and Control of Modern Power Systems · doi:10.23919/pcmp.2023.000583 · Cited by 118
Integrated Multiple-Output Synchronous Buck Converter for Electric Vehicle Power Supply
Chen, G., Deng, Y., Dong, J., Hu, Y., Jiang, L., & He, X. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2016.2633068 · Cited by 117
A Fault-Tolerant Direct Controlled PMSG Drive for Wind Energy Conversion Systems
Freire, N. M. A., & Cardoso, A. J. M. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2251734 · Cited by 116
Düşmez, S., Ali, S. H., Heydarzadeh, M., Kamath, A. S., Duran, H., & Akin, B. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2603144 · Cited by 113
Lai, W., Chen, M., Ran, L., Xu, S., Jiang, N., Wang, X., Alatise, O. M., & Mawby, P. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2546944 · Cited by 112
Self-citationStudy of Bonding Wire Failure Effects on External Measurable Signals of IGBT Module
Kexin, W., Du, M., Linlin, X., & Li, J. (2012) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2012.2200485 · Cited by 110
Power Routing for Cascaded H-Bridge Converters
Ko, Y., Andresen, M., Buticchi, G., & Liserre, M. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2658182 · Cited by 110
A Current-Sensorless Online ESR and C Identification Method for Output Capacitor of Buck Converter
Yao, K., Tang, W., Hu, W., & Lyu, J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2383436 · Cited by 109
Aldaco, S. E. D. L., Calleja, H., Chan, F., & Jiménez-Grajales, H. R. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2222673 · Cited by 109
In-Service Diagnostics for Wire-Bond Lift-off and Solder Fatigue of Power Semiconductor Packages
Eleffendi, M. A., & Johnson, C. M. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2628705 · Cited by 108
Hang, J., Shu, X., Ding, S., & Huang, Y. (2023) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3231304 · Cited by 108
Condition Monitoring: A Decade of Proposed Techniques
Avenas, Y., Dupont, L., Baker, N., Zara, H., & Barruel, F. (2015) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2015.2481564 · Cited by 107
Reliability assessment of wind turbine bearing based on the degradation-Hidden-Markov model
Li, J., Zhang, X., Zhou, X., & Lu, L. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.08.048 · Cited by 105
Hosseinabadi, F., Chakraborty, S., Bhoi, S. K., Prochart, G., Hrvanovic, D., & Hegazy, O. (2024) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2024.3379294 · Cited by 104
Power Electronic Devices in the Future
Hudgins, J. L. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2260594 · Cited by 103
Hong, J., Lee, S. B., Kral, C., & Haumer, A. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2176145 · Cited by 103
Fault Prognosis for Power Electronics Systems Using Adaptive Parameter Identification
Poon, J., Jain, P., Spanos, C. J., Panda, S. K., & Sanders, S. R. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2664052 · Cited by 102
Adinolfi, G., Graditi, G., Siano, P., & Piccolo, A. (2015) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2015.2462805 · Cited by 101
A VEN Condition Monitoring Method of DC-Link Capacitors for Power Converters
Wu, Y. H., & Du, X. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835393 · Cited by 100
Sun, P., Gong, C., Du, X., Luo, Q., Wang, H., & Zhou, L. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2652372 · Cited by 97
Design for Reliability of Power Electronic Systems
Yang, Y., Wang, H., Sangwongwanich, A., & Blaabjerg, F. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-811407-0.00051-9 · Cited by 97
Garg, P., Essakiappan, S., Krishnamoorthy, H. S., & Enjeti, P. N. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2361905 · Cited by 96
Campos-Delgado, D. U., Pecina-Sánchez, J. Á., Espinoza-Trejo, D. R., & Arce-Santana, E. (2013) · IET Electric Power Applications · doi:10.1049/iet-epa.2013.0015 · Cited by 95
Sundararajan, P., Sathik, M. H. M., Sasongko, F., Tan, C. S., Pou, J., Blaabjerg, F., & Gupta, A. K. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2951859 · Cited by 94
Condition Monitoring of DC-Link Capacitors in Aerospace Drives
Wechsler, A. S., Mecrow, B. C., Atkinson, D. J., Bennett, J. W., & Benarous, M. (2012) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2012.2222333 · Cited by 94
Balakrishnan, G. K., Yaw, C. T., Koh, S. P., Abedin, T., Raj, A. A., Kiong, T. S., & Chen, C. P. (2022) · Energies · doi:10.3390/en15166000 · Cited by 92
Metadata
- Authors
- Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P.
- Affiliations
- University of Warwick (GB)
- Durham University (GB)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2010-11
- Volume
- 25
- Issue
- 11
- Pages
- 2734-2752
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2167320299
- Cited by
- 1,278
- References
- 135
- Citations by year
- 2026: 65 · 2025: 104 · 2024: 105 · 2023: 137 · 2022: 93 · 2021: 104 · 2020: 93 · 2019: 109 · 2018: 94 · 2017: 79 · 2016: 80 · 2015: 63 · 2014: 60 · 2013: 49 · 2012: 22
- FWCI
- 22.95
- Type
- journal article
- Language
- en
- Open access
- Licence
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Durham Research Online (Durham University) (acceptedVersion)
- Durham Research Online (Durham University) (submittedVersion, cc-by)
- Funders
- Engineering and Physical Sciences Research Council (EP/E02744X/1, EP/E026923/1)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- condition monitoring, power semiconductor devices, power converters, device reliability, failure mechanisms, reliability modeling, sensor technology, signal processing, power electronics reliability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review