The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
Digital Light Processing Based Three-dimensional Printing for Medical Applications
Open accessAbstract
An additive manufacturing technology based on projection light, digital light processing (DLP), three-dimensional (3D) printing, has been widely applied in the field of medical products production and development. The precision projection light, reflected by a digital micromirror device of million pixels instead of one focused point, provides this technology both printing accuracy and printing speed. In particular, this printing technology provides a relatively mild condition to cells due to its non-direct contact. This review introduces the DLP-based 3D printing technology and its applications in medicine, including precise medical devices, functionalized artificial tissues, and specific drug delivery systems. The products are particularly discussed for their significance in medicine. This review indicates that the DLP-based 3D printing technology provides a potential tool for biological research and clinical medicine. While, it is faced to the challenges of scale-up of its usage and waiting period of regulatory approval.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Peery, A. F., Crockett, S. D., Murphy, C. C., Lund, J. L., Dellon, E. S., Williams, J. L., Jensen, E. T., Shaheen, N. J., Barritt, A. S., Lieber, S. R., et al. (2019) · Gastroenterology · doi:10.1053/j.gastro.2018.08.063 · Cited by 1,619
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Tissue-Engineered Lungs for in Vivo Implantation
Petersen, T. H., Calle, E. A., Zhao, L., Lee, E. J., Gui, L., Raredon, M. B., Gavrilov, K., Yi, T., Zhuang, Z. W., Breuer, C., et al. (2010) · Science · doi:10.1126/science.1189345 · Cited by 1,173
3D-printing techniques in a medical setting: a systematic literature review
Tack, P., Victor, J., Gemmel, P., & Annemans, L. (2016) · BioMedical Engineering OnLine · doi:10.1186/s12938-016-0236-4 · Cited by 1,098
Volumetric additive manufacturing via tomographic reconstruction
Kelly, B. E., Bhattacharya, I., Heidari, H., Shusteff, M., Spadaccini, C. M., & Taylor, H. K. (2019) · Science · doi:10.1126/science.aau7114 · Cited by 1,025
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing
Kim, S. H., Yeon, Y. K., Lee, J. M., Chao, J. R., Lee, Y. J., Seo, Y. B., Sultan, M. T., Lee, O. J., Lee, J. S., Yoon, S.-I., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03759-y · Cited by 972
Stem cells in tissue engineering
Bianco, P., & Robey, P. G. (2001) · Nature · doi:10.1038/35102181 · Cited by 965
Three-dimensional printing of transparent fused silica glass
Kotz, F., Arnold, K., Bauer, W., Schild, D., Keller, N., Sachsenheimer, K., Nargang, T. M., Richter, C., Helmer, D., & Rapp, B. E. (2017) · Nature · doi:10.1038/nature22061 · Cited by 876
Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting
Ma, X., Qu, X., Zhu, W., Li, Y.-S., Yuan, S., Zhang, H., Liu, J., Wang, P., Lai, C. S. E., Zanella, F., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1524510113 · Cited by 872
3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822 · cited 1×
“Comparison of various 3D printing methods in the medical field[12,14,15].”
BackgroundSelf-citationThree‐dimensional printing of porous ceramic scaffolds for bone tissue engineering
Seitz, H., Rieder, W., Irsen, S., Leukers, B., & Tille, C. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30291 · Cited by 742
Biomimetic 3D-printed scaffolds for spinal cord injury repair
Koffler, J., Zhu, W., Qu, X., Platoshyn, O., Dulin, J. N., Brock, J., Graham, L., Lu, P., Sakamoto, J., Marsala, M., et al. (2019) · Nature Medicine · doi:10.1038/s41591-018-0296-z · Cited by 708
The Epidemiology of Cirrhosis in the United States: A Population-based Study
Scaglione, S., Kliethermes, S., Cao, G., Shoham, D., Durazo, R., Luke, A., & Volk, M. L. (2015) · Journal of Clinical Gastroenterology · doi:10.1097/mcg.0000000000000208 · Cited by 683
3D Bioprinting for Tissue and Organ Fabrication
Zhang, Y. S., Yue, K., Aleman, J., Mollazadeh-Moghaddam, K., Bakht, S. M., Yang, J., Jia, W., Dell’Erba, V., Assawes, P., Shin, S. R., et al. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1612-8 · Cited by 682
3D bioprinting of tissues and organs for regenerative medicine
Vijayavenkataraman, S., Yan, W.-C., Lu, W. F., Wang, C.-H., & Fuh, J. Y. H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.004 · Cited by 630
Volumetric Bioprinting of Complex Living‐Tissue Constructs within Seconds
Bernal, P. N., Delrot, P., Loterie, D., Li, Y., Malda, J., Moser, C., & Levato, R. (2019) · Advanced Materials · doi:10.1002/adma.201904209 · Cited by 604
Grayscale digital light processing 3D printing for highly functionally graded materials
Kuang, X., Wu, J., Chen, K., Zhao, Z., Ding, Z., Hu, F., Fang, D., & Qi, H. J. (2019) · Science Advances · doi:10.1126/sciadv.aav5790 · Cited by 568
Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture
Zhu, W., Qu, X., Zhu, J., Ma, X., Patel, S., Liu, J., Wang, P., Lai, C. S. E., Gou, M., Xu, Y., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.01.042 · Cited by 567
Self-citationBone tissue engineering therapeutics: controlled drug delivery in three-dimensional scaffolds
Mouriño, V., & Boccaccini, A. R. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2009.0379 · Cited by 527
Scalable submicrometer additive manufacturing
Saha, S. K., Wang, D., Nguyen, V. H., Chang, Y., Oakdale, J. S., & Chen, S.-C. (2019) · Science · doi:10.1126/science.aax8760 · Cited by 513
3D Printing Pharmaceuticals: Drug Development to Frontline Care
Trenfield, S. J., Awad, A., Goyanes, A., Gaisford, S., & Basit, A. W. (2018) · Trends in Pharmacological Sciences · doi:10.1016/j.tips.2018.02.006 · Cited by 502
Ma, X., Liu, J., Zhu, W., Tang, M., Lawrence, N., Yu, C., Gou, M., & Chen, S. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.06.011 · Cited by 401
Self-citationEmerging Biofabrication Strategies for Engineering Complex Tissue Constructs
Pedde, R. D., Mirani, B., Navaei, A., Styan, T., Wong, S., Mehrali, M., Thakur, A., Mohtaram, N. K., Bayati, A., Dolatshahi‐Pirouz, A., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606061 · Cited by 388
Lu, Y., Mapili, G., Suhali, G., Chen, S., & Roy, K. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30601 · Cited by 380
3D Optical Printing of Piezoelectric Nanoparticle–Polymer Composite Materials
Kim, K., Zhu, W., Qu, X., Aaronson, C., McCall, W. R., Chen, S., & Sirbuly, D. J. (2014) · ACS Nano · doi:10.1021/nn503268f · Cited by 374
Engineering an in vitro air-blood barrier by 3D bioprinting
Horváth, L., Umehara, Y., Jud, C., Blank, F., Petri-Fink, A., & Rothen-Rutishauser, B. (2015) · Scientific Reports · doi:10.1038/srep07974 · Cited by 345
Kim, S., Shin, Y., Jung, H.-D., Hwang, C., Baik, H.-S., & Cha, J. (2017) · American Journal of Orthodontics and Dentofacial Orthopedics · doi:10.1016/j.ajodo.2017.05.025 · Cited by 327
Bio-inspired detoxification using 3D-printed hydrogel nanocomposites
Gou, M., Qu, X., Zhu, W., Xiang, M., Yang, J., Zhang, K., Wei, Y., & Chen, S. (2014) · Nature Communications · doi:10.1038/ncomms4774 · Cited by 323
Self-citationBio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs
Lim, K. S., Levato, R., Costa, P. F., Castilho, M. D., Alcala-Orozco, C. R., van Dorenmalen, K. M. A., Melchels, F. P. W., Gawlitta, D., Hooper, G. J., Malda, J., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aac00c · Cited by 296
3D‐Printed Artificial Microfish
Zhu, W., Li, J., Leong, Y. J., Rozen, I., Qu, X., Dong, R., Wu, Z., Gao, W., Chung, P. H., Wang, J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201501372 · Cited by 288
3D printing applications for transdermal drug delivery
Economidou, S. N., Lamprou, D. A., & Douroumis, D. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.01.031 · Cited by 270
Kadry, H., Wadnap, S., Xu, C., & Ahsan, F. (2019) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2019.05.008 · Cited by 265
3D Printing of Conductive Complex Structures with In Situ Generation of Silver Nanoparticles
Fantino, E., Chiappone, A., Roppolo, I., Manfredi, D., Bongiovanni, R., Pirri, C. F., & Calignano, F. (2016) · Advanced Materials · doi:10.1002/adma.201505109 · Cited by 253
Rapid continuous 3D printing of customizable peripheral nerve guidance conduits
Zhu, W., Tringale, K. R., Woller, S. A., You, S., Johnson, S., Shen, H., Schimelman, J., Whitney, M., Steinauer, J., Xu, W., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.04.001 · Cited by 253
Three-dimensional bioprinting in tissue engineering and regenerative medicine
Gao, G., & Cui, X. (2016) · Biotechnology Letters · doi:10.1007/s10529-015-1975-1 · Cited by 227
Engineering a Brain Cancer Chip for High-throughput Drug Screening
Fan, Y., Nguyen, D. T., Akay, Y., Xu, F., & Akay, M. (2016) · Scientific Reports · doi:10.1038/srep25062 · Cited by 216
Digital microfabrication of user‐defined 3D microstructures in cell‐laden hydrogels
Soman, P., Chung, P. H., Zhang, A. P., & Chen, S. (2013) · Biotechnology and Bioengineering · doi:10.1002/bit.24957 · Cited by 207
Accuracy of 3-dimensional printed dental models reconstructed from digital intraoral impressions
Brown, G. B., Currier, G. F., Kadioglu, O., & Kierl, J. P. (2018) · American Journal of Orthodontics and Dentofacial Orthopedics · doi:10.1016/j.ajodo.2018.06.009 · Cited by 170
Nerve guides manufactured from photocurable polymers to aid peripheral nerve repair
Pateman, C. J., Harding, A. J., Glen, A., Taylor, C. S., Christmas, C. R., Robinson, P. P., Rimmer, S., Boissonade, F. M., Claeyssens, F., & Haycock, J. W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.01.055 · Cited by 164
Regenerative Therapies for Spinal Cord Injury
Ashammakhi, N., Kim, H.-J., Ehsanipour, A., Bierman, R. D., Kaarela, O., Xue, C., Khademhosseini, A., & Seidlits, S. K. (2019) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2019.0182 · Cited by 162
Current progress in tissue engineering of heart valves: multiscale problems, multiscale solutions
Cheung, D. Y., Duan, B., & Butcher, J. T. (2015) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.2015.1051527 · Cited by 160
Regulating 3D-printed medical products
Ricles, L. M., Coburn, J., Prima, M. A. D., & Oh, S. S. (2018) · Science Translational Medicine · doi:10.1126/scitranslmed.aan6521 · Cited by 159
Rapid 3D printing of functional nanoparticle-enhanced conduits for effective nerve repair
Tao, J., Zhang, J., Du, T., Xu, X., Deng, X., Chen, S., Liu, J., Chen, Y., Liu, X., Xiong, M., et al. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.03.047 · Cited by 157
Self-citationCardiac tissue engineering: state-of-the-art methods and outlook
Nguyen, A. H., Marsh, P., Schmiess-Heine, L., Burke, P. J., Lee, A. P., Lee, J., & Cao, H. (2019) · Journal of Biological Engineering · doi:10.1186/s13036-019-0185-0 · Cited by 148
3D Printed Teeth for the Preclinical Education of Dental Students
Höhne, C., & Schmitter, M. (2019) · Journal of Dental Education · doi:10.21815/jde.019.103 · Cited by 142
3D Printing is a Transformative Technology in Congenital Heart Disease
Anwar, S., Singh, G. K., Miller, J. R., Sharma, M., Manning, P. B., Billadello, J. J., Eghtesady, P., & Woodard, P. K. (2018) · JACC Basic to Translational Science · doi:10.1016/j.jacbts.2017.10.003 · Cited by 134
Dean, D., Wallace, J., Siblani, A., Wang, M. O., Kim, K., Mikos, A. G., & Fisher, J. P. (2012) · Virtual and Physical Prototyping · doi:10.1080/17452759.2012.673152 · Cited by 127
Soman, P., Kelber, J. A., Lee, J. W., Wright, T. N., Vecchio, K. S., Klemke, R. L., & Chen, S. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.06.012 · Cited by 124
Projection-Based 3D Printing of Cell Patterning Scaffolds with Multiscale Channels
Xue, D., Wang, Y., Zhang, J., Mei, D., Wang, Y., & Chen, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b03867 · Cited by 116
Self-citationThe future of drug discovery and development: Shifting emphasis towards personalized medicine
Amir-Aslani, A., & Mangematin, V. (2009) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2009.09.005 · Cited by 97
Liu, J., He, J., Liu, J., Ma, X., Chen, Q., Lawrence, N., Zhu, W. Z., Xu, Y., & Chen, S. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00040 · Cited by 85
Ma, X., Dewan, S., Liu, J., Tang, M., Miller, K. L., Yu, C., Lawrence, N., McCulloch, A. D., & Chen, S. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.12.026 · Cited by 70
3D printing of nerve conduits with nanoparticle-encapsulated RGFP966
Xu, X., Tao, J., Wang, S., Yang, L., Zhang, J., Zhang, J., Liu, H., Cheng, H., Xu, J., Gou, M., et al. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.05.014 · Cited by 65
Self-citationYang, Y., Du, T., Zhang, J., Kang, T., Luo, L., Tao, J., Gou, Z., Chen, S., Du, Y., He, J., et al. (2017) · Advanced Science · doi:10.1002/advs.201600491 · Cited by 43
Self-citation3D Printing Enabled Customization of Functional Microgels
Liu, X., Tao, J., Liu, J., Xu, X., Zhang, J., Huang, Y., Chen, Y., Zhang, J., Deng, D. Y. B., Gou, M., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b18701 · Cited by 39
Self-citationPolydiacetylene-Nanoparticle-Functionalized Microgels for Topical Bacterial Infection Treatment
Tao, J., Xu, X., Wang, S., Kang, T., Guo, C., Liu, X., Cheng, H., Liu, Y., Jiang, X. L., Mao, J., et al. (2019) · ACS Macro Letters · doi:10.1021/acsmacrolett.9b00196 · Cited by 34
Self-citationFu, X., Xia, B., Ji, B., et al. (2019) · Analytica Chimica Acta · doi:10.1016/j.aca.2019.02.046 · Cited by 33
From clinical imaging to implantation of 3D printed tissues
Pashuck, E. T., & Stevens, M. M. (2016) · Nature Biotechnology · doi:10.1038/nbt.3503 · Cited by 25
(2015) · Nature Biotechnology · doi:10.1038/nbt1015-1014a · Cited by 22
Ma, Z., Lu, Y., Yang, Y., Wang, J., & Kang, X. (2019) · Regenerative Medicine · doi:10.2217/rme-2018-0156 · Cited by 6
Cited by
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saleh Alghamdi, S., John, S., Roy Choudhury, N., & Dutta, N. K. (2021) · Polymers · doi:10.3390/polym13050753 · Cited by 469
3D bioprinted silk fibroin hydrogels for tissue engineering
Kim, S. H., Hong, H., Ajiteru, O., Sultan, M. T., Lee, Y. J., Lee, J. S., Lee, O. J., Lee, H., Park, H. S., Choi, K. Y., et al. (2021) · Nature Protocols · doi:10.1038/s41596-021-00622-1 · Cited by 294
Additive manufacturing of magnetic materials
Chaudhary, V., Mantri, S. A., Ramanujan, R. V., & Banerjee, R. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100688 · Cited by 275
Digital Light Processing Based Bioprinting with Composable Gradients
Wang, M., Li, W., Mille, L. S., Ching, T., Luo, Z., Tang, G., Garciamendez, C. E., Lesha, A., Hashimoto, M., & Zhang, Y. S. (2022) · Advanced Materials · doi:10.1002/adma.202107038 · Cited by 206
Metadata
- Authors
- Zhang, J., Hu, Q., Wang, S., Tao, J., & Gou, M.
- Venue
- International Journal of Bioprinting
- Publisher
- AccScience Publishing
- Published
- 2019-11-28
- Volume
- 6
- Issue
- 1
- Pages
- 242
- ISSN
- 2424-7723 (ISSN-L)
- 2424-8002
- OpenAlex
- W2990605218
- Cited by
- 359
- References
- 66
- FWCI
- 8.54
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.