The DOI matches its Crossref record; 134 of the 134 references it cites were found in a registry or an index.
Current Biomedical Applications of 3D Printing and Additive Manufacturing
Open accessAbstract
Additive manufacturing (AM) has emerged over the past four decades as a cost-effective, on-demand modality for fabrication of geometrically complex objects. The ability to design and print virtually any object shape using a diverse array of materials, such as metals, polymers, ceramics and bioinks, has allowed for the adoption of this technology for biomedical applications in both research and clinical settings. Current advancements in tissue engineering and regeneration, therapeutic delivery, medical device fabrication and operative management planning ensure that AM will continue to play an increasingly important role in the future of healthcare. In this review, we outline current biomedical applications of common AM techniques and materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
Hydrogels for tissue engineering: scaffold design variables and applications
Drury, J. L., & Mooney, D. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00340-5 · Cited by 5,136
Organogenesis in a dish: Modeling development and disease using organoid technologies
Lancaster, M. A., & Knoblich, J. A. (2014) · Science · doi:10.1126/science.1247125 · Cited by 2,931
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Hydrogels with tunable stress relaxation regulate stem cell fate and activity
Chaudhuri, O., Gu, L., Klumpers, D., Darnell, M., Bencherif, S. A., Weaver, J. C., Huebsch, N., Lee, H.-P., Lippens, E., Duda, G. N., et al. (2016) · Nature Materials · doi:10.1038/nmat4489 · Cited by 2,443
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Schwank, G., Koo, B.-K., Sasselli, V., Dekkers, J. F., Heo, I., Demircan, T., Sasaki, N., Boymans, S., Cuppen, E., van der Ent, C. K., et al. (2013) · Cell Stem Cell · doi:10.1016/j.stem.2013.11.002 · Cited by 1,424
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Zhang, Y. S., Arneri, A., Bersini, S., Shin, S.-R., Zhu, K., Goli-Malekabadi, Z., Aleman, J., Colosi, C., Busignani, F., Dell'Erba, V., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.003 · Cited by 951
Three-dimensional culture systems in cancer research: Focus on tumor spheroid model
Nath, S., & Devi, G. R. (2016) · Pharmacology & Therapeutics · doi:10.1016/j.pharmthera.2016.03.013 · Cited by 919
Biswas, A., Bayer, I. S., Biris, A. S., Wang, T., Dervishi, E., & Faupel, F. (2012) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.11.001 · Cited by 909
Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
Engineering Stem Cell Organoids
Yin, X., Mead, B. E., Safaee, H., Langer, R., Karp, J. M., & Levy, O. (2016) · Cell Stem Cell · doi:10.1016/j.stem.2015.12.005 · Cited by 866
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Klotz, B. J., Gawlitta, D., Rosenberg, A. J. W. P., Malda, J., & Melchels, F. P. W. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.01.002 · Cited by 846
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
Norman, J., Madurawe, R. D., Moore, C. M. V., Khan, M. A., & Khairuzzaman, A. (2017) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.001 · Cited by 810
A definition of bioinks and their distinction from biomaterial inks
Groll, J., Burdick, J. A., Cho, D.-W., Derby, B., Gelinsky, M., Heilshorn, S. C., Jüngst, T., Malda, J., Mironov, V. A., Nakayama, K., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aaec52 · Cited by 797
RepRap – the replicating rapid prototyper
Jones, R., Haufe, P., Sells, E., Iravani, P., Olliver, V., Palmer, C., & Bowyer, A. (2011) · Robotica · doi:10.1017/s026357471000069x · Cited by 736
Biofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
Reinforcement of hydrogels using three-dimensionally printed microfibres
Visser, J., Melchels, F. P. W., Jeon, J. E., van Bussel, E. M., Kimpton, L. S., Byrne, H. M., Dhert, W. J. A., Dalton, P. D., Hutmacher, D. W., & Malda, J. (2015) · Nature Communications · doi:10.1038/ncomms7933 · Cited by 718
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Human microvasculature fabrication using thermal inkjet printing technology
Cui, X., & Boland, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.056 · Cited by 704
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
Research on the printability of hydrogels in 3D bioprinting
He, Y., Yang, F., Zhao, H., Gao, Q., Xia, B., & Fu, J. (2016) · Scientific Reports · doi:10.1038/srep29977 · Cited by 654
Biofabrication: A Guide to Technology and Terminology
Moroni, L., Boland, T., Burdick, J. A., De Maria, C., Derby, B., Forgacs, G., Groll, J., Li, Q., Malda, J., Mironov, V. A., et al. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2017.10.015 · Cited by 636
Lee, C. H., Cook, J. L., Mendelson, A., Moioli, E. K., Yao, H., & Mao, J. J. (2010) · The Lancet · doi:10.1016/s0140-6736(10)60668-x · Cited by 613
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Fabrication of Scaffolds for Bone-Tissue Regeneration
Chocholata, P., Kulda, V., & Babuska, V. (2019) · Materials · doi:10.3390/ma12040568 · Cited by 603
Transdermal patches: history, development and pharmacology
Pastore, M. N., Kalia, Y. N., Horstmann, M., & Roberts, M. S. (2015) · British Journal of Pharmacology · doi:10.1111/bph.13059 · Cited by 586
3D Bioprinting for Organ Regeneration
Cui, H., Nowicki, M., Fisher, J. P., & Zhang, L. G. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601118 · Cited by 535
3D printing of tablets containing multiple drugs with defined release profiles
Khaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.07.067 · Cited by 508
Mimicking biological functionality with polymers for biomedical applications
Green, J. J., & Elisseeff, J. H. (2016) · Nature · doi:10.1038/nature21005 · Cited by 495
Arabnejad, S., Johnston, B., Tänzer, M., & Pasini, D. (2016) · Journal of Orthopaedic Research® · doi:10.1002/jor.23445 · Cited by 481
3D bioprinting of functional human skin: production and in vivo analysis
Cubo, N., Garcia, M., del Cañizo, J. F., Velasco, D., & Jorcano, J. L. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/015006 · Cited by 454
Assessing bioink shape fidelity to aid material development in 3D bioprinting
Ribeiro, A., Blokzijl, M. M., Levato, R., Visser, C. W., Castilho, M., Hennink, W. E., Vermonden, T., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa90e2 · Cited by 448
Alginate type and RGD density control myoblast phenotype
Rowley, J. A., & Mooney, D. J. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1287 · Cited by 437
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Hinton, T. J., Hudson, A., Pusch, K., Lee, A., & Feinberg, A. W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00170 · Cited by 437
Cell encapsulation using biopolymer gels for regenerative medicine
Hunt, N. C., & Grover, L. M. (2010) · Biotechnology Letters · doi:10.1007/s10529-010-0221-0 · Cited by 434
Critical-Size Bone Defects: Is There a Consensus for Diagnosis and Treatment?
Nauth, A., Schemitsch, E., Norris, B., Nollin, Z., & Watson, J. T. (2018) · Journal of Orthopaedic Trauma · doi:10.1097/bot.0000000000001115 · Cited by 419
Pepelanova, I., Kruppa, K., Scheper, T., & Lavrentieva, A. (2018) · Bioengineering · doi:10.3390/bioengineering5030055 · Cited by 416
Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue
Byambaa, B., Annabi, N., Yue, K., Trujillo‐de Santiago, G., Alvarez, M. M., Jia, W., Kazemzadeh‐Narbat, M., Shin, S. R., Tamayol, A., & Khademhosseini, A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700015 · Cited by 394
Riedl, A., Schlederer, M., Pudelko, K., Stadler, M., Walter, S., Unterleuthner, D., Unger, C., Kramer, N., Hengstschläger, M., Kenner, L., et al. (2016) · Journal of Cell Science · doi:10.1242/jcs.188102 · Cited by 389
3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
Trombetta, R., Inzana, J. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1678-3 · Cited by 377
Levett, P. A., Melchels, F. P. W., Schrobback, K., Hutmacher, D. W., Malda, J., & Klein, T. J. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.005 · Cited by 375
Channelled tablets: An innovative approach to accelerating drug release from 3D printed tablets
Sadia, M., Arafat, B., Ahmed, W., Forbes, R. T., & Alhnan, M. A. (2018) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.11.022 · Cited by 368
Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells
Cui, X., Dean, D., Ruggeri, Z. M., & Boland, T. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22762 · Cited by 364
Human Skin 3D Bioprinting Using Scaffold‐Free Approach
Pourchet, L. J., Thepot, A., Albouy, M., Courtial, E. J., Boher, A., Blum, L. J., & Marquette, C. A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601101 · Cited by 352
3D printed microneedles for insulin skin delivery
Pere, C. P. P., Economidou, S. N., Lall, G., Ziraud, C., Boateng, J. S., Alexander, B. D., Lamprou, D. A., & Douroumis, D. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.03.031 · Cited by 349
3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration
Rosenzweig, D., Carelli, E., Steffen, T., Jarzem, P., & Haglund, L. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms160715118 · Cited by 326
Self-citation3D Bioprinting a Cell-Laden Bone Matrix for Breast Cancer Metastasis Study
Zhou, X., Zhu, W., Nowicki, M., Miao, S., Cui, H., Holmes, B., Glazer, R. I., & Zhang, L. G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10673 · Cited by 307
3D printed porous ceramic scaffolds for bone tissue engineering: a review
Wen, Y., Xun, S., Haoye, M., Baichuan, S., Peng, C., Xuejian, L., Kaihong, Z., Xuan, Y., Jiang, P., & Shibi, L. (2017) · Biomaterials Science · doi:10.1039/c7bm00315c · Cited by 302
Bio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs
Lim, K. S., Levato, R., Costa, P. F., Castilho, M. D., Alcala-Orozco, C. R., van Dorenmalen, K. M. A., Melchels, F. P. W., Gawlitta, D., Hooper, G. J., Malda, J., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aac00c · Cited by 296
3D Bioprinted Human Skeletal Muscle Constructs for Muscle Function Restoration
Kim, J. H., Seol, Y.-J., Ko, I. K., Kang, H.-W., Lee, Y. K., Yoo, J. J., Atala, A., & Lee, S. J. (2018) · Scientific Reports · doi:10.1038/s41598-018-29968-5 · Cited by 290
Self-assembled micro-organogels for 3D printing silicone structures
O’Bryan, C. S., Bhattacharjee, T., Hart, S., Kabb, C. P., Schulze, K. D., Chilakala, I., Sumerlin, B. S., Sawyer, W. G., & Angelini, T. E. (2017) · Science Advances · doi:10.1126/sciadv.1602800 · Cited by 277
Three-dimensional printing surgical instruments: are we there yet?
Rankin, T. M., Giovinco, N. A., Cucher, D. J., Watts, G., Hurwitz, B., & Armstrong, D. G. (2014) · Journal of Surgical Research · doi:10.1016/j.jss.2014.02.020 · Cited by 275
Solanki, N. G., Tahsin, M., Shah, A. V., & Serajuddin, A. T. M. (2018) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2017.10.021 · Cited by 272
3D printing applications for transdermal drug delivery
Economidou, S. N., Lamprou, D. A., & Douroumis, D. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.01.031 · Cited by 270
Organ-Derived Decellularized Extracellular Matrix: A Game Changer for Bioink Manufacturing?
Choudhury, D., Tun, H. W., Wang, T., & Naing, M. W. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2018.03.003 · Cited by 265
A Photo‐Crosslinkable Kidney ECM‐Derived Bioink Accelerates Renal Tissue Formation
Ali, M., PR, A. K., Yoo, J. J., Zahran, F., Atala, A., & Lee, S. J. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201800992 · Cited by 264
3D Printing—Encompassing the Facets of Dentistry
Oberoi, G., Nitsch, S., Edelmayer, M., Janjić, K., Müller, A. S., & Agis, H. (2018) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2018.00172 · Cited by 250
3D Bioprinting of Self‐Standing Silk‐Based Bioink
Zheng, Z., Wu, J., Liu, M., Wang, H., Li, C., Rodriguez, M. J., Li, G., Wang, X., & Kaplan, D. L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701026 · Cited by 241
Three-Dimensional Printed Multiphase Scaffolds for Regeneration of Periodontium Complex
Lee, C. H., Hajibandeh, J., Suzuki, T., Fan, A., Shang, P., & Mao, J. J. (2014) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0386 · Cited by 234
Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys
Hong, D., Chou, D.-T., Velikokhatnyi, O. I., Roy, A., Lee, B., Swink, I., Issaev, I., Kuhn, H. A., & Kumta, P. N. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.08.032 · Cited by 234
The effect of integrin-specific bioactive coatings on tissue healing and implant osseointegration
Petrie, T. A., Raynor, J. E., Reyes, C. D., Burns, K. L., Collard, D. M., & García, A. J. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.03.036 · Cited by 229
Nyberg, E., Rindone, A., Dorafshar, A., & Grayson, W. L. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0418 · Cited by 229
Bioprinting Complex Cartilaginous Structures with Clinically Compliant Biomaterials
Kesti, M., Eberhardt, C., Pagliccia, G., Kenkel, D., Grande, D., Boss, A., & Zenobi‐Wong, M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503423 · Cited by 228
Optimization of collagen type I-hyaluronan hybrid bioink for 3D bioprinted liver microenvironments
Mazzocchi, A., Devarasetty, M., Huntwork, R., Soker, S., & Skardal, A. (2018) · Biofabrication · doi:10.1088/1758-5090/aae543 · Cited by 226
Duarte Campos, D. F., Blaeser, A., Weber, M., Jäkel, J., Neuss, S., Jahnen-Dechent, W., & Fischer, H. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015003 · Cited by 224
Self-citationEmerging properties of hydrogels in tissue engineering
Lee, J.-H., & Kim, H.-W. (2018) · Journal of Tissue Engineering · doi:10.1177/2041731418768285 · Cited by 222
Drop-on-demand printing of cells and materials for designer tissue constructs
Boland, T., Tao, X., Damon, B. J., Manley, B., Kesari, P., Jalota, S., & Bhaduri, S. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.047 · Cited by 220
Barba, A., Diez-Escudero, A., Maazouz, Y., Rappe, K., Espanol, M., Montufar, E. B., Bonany, M., Sadowska, J. M., Guillem-Marti, J., Öhman-Mägi, C., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14175 · Cited by 219
Zhang, W., Feng, C., Yang, G., Li, G., Ding, X., Wang, S., Dou, Y., Zhang, Z., Chang, J., Wu, C., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.05.005 · Cited by 218
Hybrid and biohybrid silicate based materials: molecular vs. block-assembling bottom–up processes
Ruiz-Hitzky, E., Aranda, P., Darder, M., & Ogawa, M. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00052c · Cited by 215
Fabrication of fillable microparticles and other complex 3D microstructures
McHugh, K. J., Nguyen, T. D., Linehan, A. R., Yang, D., Behrens, A. M., Rose, S., Tochka, Z. L., Tzeng, S. Y., Norman, J. J., Anselmo, A. C., et al. (2017) · Science · doi:10.1126/science.aaf7447 · Cited by 211
Chang, B., Song, W., Han, T., Yan, J., Li, F., Zhao, L., Kou, H., & Zhang, Y. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.022 · Cited by 208
3D printing of tablets using inkjet with UV photoinitiation
Clark, E. A., Alexander, M. R., Irvine, D. J., Roberts, C. J., Wallace, M. J., Sharpe, S., Yoo, J., Hague, R. J. M., Tuck, C. J., & Wildman, R. D. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.06.085 · Cited by 207
Influence of Geometry on the Drug Release Profiles of Stereolithographic (SLA) 3D-Printed Tablets
Martinez, P. R., Goyanes, A., Basit, A. W., & Gaisford, S. (2018) · AAPS PharmSciTech · doi:10.1208/s12249-018-1075-3 · Cited by 201
Agarose-Based Hydrogels as Suitable Bioprinting Materials for Tissue Engineering
López-Marcial, G. R., Zeng, A. Y., Osuna, C., Dennis, J., García, J. M., & O’Connell, G. D. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00903 · Cited by 196
Athirasala, A., Tahayeri, A., Thrivikraman, G., França, C. M., Monteiro, N., Tran, V., Ferracane, J., & Bertassoni, L. E. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9b4e · Cited by 189
Towards fabrication of 3D printed medical devices to prevent biofilm formation
Sandler, N., Salmela, I., Fallarero, A., Rosling, A., Khajeheian, M., Kolakovic, R., Genina, N., Nyman, J., & Vuorela, P. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.11.001 · Cited by 184
Wu, P. K., Ringeisen, B. R., Callahan, J., Brooks, M., Bubb, D. M., Wu, H. D., Piqué, A., Spargo, B., McGill, R. A., & Chrisey, D. B. (2001) · Thin Solid Films · doi:10.1016/s0040-6090(01)01347-5 · Cited by 175
Coaxial 3D bioprinting of self-assembled multicellular heterogeneous tumor fibers
Dai, X., Liu, L., Ouyang, J., Li, X., Zhang, X., Lan, Q., & Xu, T. (2017) · Scientific Reports · doi:10.1038/s41598-017-01581-y · Cited by 173
Shao, H., Ke, X., Liu, A., Sun, M., He, Y., Yang, X., Fu, J., Liu, Y., Zhang, L., Yang, G., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa663c · Cited by 172
Zadpoor, A. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18081607 · Cited by 172
Three-dimensional bioprinting of rat embryonic neural cells
Lee, W., Pinckney, J., Lee, V., Lee, J.-H., Fischer, K., Polio, S., Park, J.-K., & Yoo, S.-S. (2009) · NeuroReport · doi:10.1097/wnr.0b013e32832b8be4 · Cited by 162
Bioprinting Perfusion-Enabled Liver Equivalents for Advanced Organ-on-a-Chip Applications
Grix, T., Ruppelt, A., Thomas, A., Amler, A.-K., Noichl, B. P., Lauster, R., & Kloke, L. (2018) · Genes · doi:10.3390/genes9040176 · Cited by 161
de Ruijter, M., Ribeiro, A., Dokter, I., Castilho, M. D., & Malda, J. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800418 · Cited by 159
Additive Manufacturing with 3D Printing: Progress from Bench to Bedside
Rahman, Z., Ali, S. F. B., Ozkan, T., Charoo, N. A., Reddy, I. K., & Khan, M. A. (2018) · The AAPS Journal · doi:10.1208/s12248-018-0225-6 · Cited by 156
3D Printing of Surgical Instruments for Long-Duration Space Missions
Wong, J. Y., & Pfahnl, A. C. (2014) · Aviation Space and Environmental Medicine · doi:10.3357/asem.3898.2014 · Cited by 155
Viscoll collagen solution as a novel bioink for direct 3D bioprinting
Osidak, E. O., Karalkin, P. A., Osidak, M. S., Parfenov, V. A., Sivogrivov, D. E., Pereira, F. D. A. S., Gryadunova, A. A., Koudan, E. V., Khesuani, Y. D., Kasyanov, V. A., et al. (2019) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-019-6233-y · Cited by 155
Chang, J. W., Park, S. A., Park, J., Choi, J. W., Kim, Y., Shin, Y. S., & Kim, C. (2014) · Artificial Organs · doi:10.1111/aor.12310 · Cited by 154
A Bioprinted Liver-on-a-Chip for Drug Screening Applications
Knowlton, S. M., & Taşoğlu, S. (2016) · Trends in biotechnology · doi:10.1016/j.tibtech.2016.05.014 · Cited by 147
Kizawa, H., Nagao, E., Shimamura, M., Zhang, G., & Torii, H. (2017) · Biochemistry and Biophysics Reports · doi:10.1016/j.bbrep.2017.04.004 · Cited by 147
Recent advances in pharmaceutical dosage forms and devices using additive manufacturing technologies
Gioumouxouzis, C. I., Karavasili, C., & Fatouros, D. G. (2018) · Drug Discovery Today · doi:10.1016/j.drudis.2018.11.019 · Cited by 144
Lei, M., Schumacher, L. J., Lai, Y.-C., Juan, W.-T., Yeh, C.-Y., Wu, P., Jiang, T.-X., Baker, R. E., Widelitz, R. B., Yang, L., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1700475114 · Cited by 142
Bioprinting of a functional vascularized mouse thyroid gland construct
Bulanova, E. A., Koudan, E. V., Degosserie, J., Heymans, C., Pereira, F. D. A. S., Parfenov, V. A., Sun, Y. N., Wang, Q., Akhmedova, S. A., Sviridova, I. K., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7fdd · Cited by 139
Large volume syringe pump extruder for desktop 3D printers
Pusch, K. M., Hinton, T. J., & Feinberg, A. W. (2018) · HardwareX · doi:10.1016/j.ohx.2018.02.001 · Cited by 137
The design of additively manufactured lattices to increase the functionality of medical implants
Burton, H. E., Eisenstein, N., Lawless, B. M., Jamshidi, P., Aristizabal, M., Addison, O., Shepherd, D. E. T., Attallah, M. M., Grover, L. M., & Cox, S. C. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.10.052 · Cited by 136
3D Printed Surgical Instruments: The Design and Fabrication Process
George, M. J., Aroom, K., Hawes, H. G., Gill, B. S., & Love, J. D. (2016) · World Journal of Surgery · doi:10.1007/s00268-016-3814-5 · Cited by 134
Cipitria, A., Reichert, J. C., Epari, D. R., Saifzadeh, S., Berner, A., Schell, H., Mehta, M., Schuetz, M., Duda, G. N., & Hutmacher, D. W. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.011 · Cited by 133
Suspended Manufacture of Biological Structures
Moxon, S. R., Cooke, M. E., Cox, S. C., Snow, M., Jeys, L. M., Jones, S. W., Smith, A. M., & Grover, L. M. (2017) · Advanced Materials · doi:10.1002/adma.201605594 · Cited by 133
Self-citationEffects of 3D-Printed Polycaprolactone/β-Tricalcium Phosphate Membranes on Guided Bone Regeneration
Shim, J., Won, J.-Y., Park, J.-H., Bae, J.-H., Ahn, G., Kim, C., Lim, D.-H., Cho, D., Yun, W., Bae, E., et al. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18050899 · Cited by 125
Zhao, H., Chen, Y., Shao, L., Xie, M., Nie, J., Qiu, J., Zhao, P., Ramezani, H., Fu, J., Ouyang, H., et al. (2018) · Small · doi:10.1002/smll.201802630 · Cited by 124
3D-Printed Bioactive Ca3SiO5 Bone Cement Scaffolds with Nano Surface Structure for Bone Regeneration
Yang, C., Wang, X., Ma, B., Zhu, H., Huan, Z., Ma, N., Wu, C., & Chang, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14297 · Cited by 122
Three-Dimensional Printed Polylactic Acid Scaffolds Promote Bone-like Matrix Deposition in Vitro
Fairag, R., Rosenzweig, D. H., Ramírez-GarcíaLuna, J. L., Weber, M. H., & Haglund, L. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b02502 · Cited by 120
Self-citationYou, F., Chen, D., Cooper, D. M. L., Chang, T., & Eames, B. F. (2018) · Biofabrication · doi:10.1088/1758-5090/aaf44a · Cited by 113
Wu, X., Wang, J., Zhao, C., Sun, X., Shi, Y., Zhang, Z.-A., Li, Y.-N., & Wang, M. (2015) · Chinese Medical Journal · doi:10.4103/0366-6999.151088 · Cited by 102
Terada, T., Noda, S., & Inui, K. (2015) · Pharmacology & Therapeutics · doi:10.1016/j.pharmthera.2015.05.009 · Cited by 99
Deng, Y., Jiang, C., Li, C., Li, T., Peng, M., Wang, J., & Dai, K. (2017) · Scientific Reports · doi:10.1038/s41598-017-05196-1 · Cited by 85
Titanium surfaces with adherent selenium nanoclusters as a novel anticancer orthopedic material
Tran, P. A., Sarin, L., Hurt, R. H., & Webster, T. J. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32631 · Cited by 83
Cox, S. C., Jamshidi, P., Eisenstein, N. M., Webber, M. A., Hassanin, H. S., Attallah, M. M., Shepherd, D. E. T., Addison, O., & Grover, L. M. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.04.006 · Cited by 82
Antibacterial and anti-encrustation biodegradable polymer coating for urinary catheter
Dayyoub, E., Frant, M., Pinnapireddy, S. R., Liefeith, K., & Bakowsky, U. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.08.072 · Cited by 82
Reid, J. A., Mollica, P. A., Bruno, R. D., & Sachs, P. C. (2018) · Breast Cancer Research · doi:10.1186/s13058-018-1045-4 · Cited by 77
Hu, Q., Sun, X., Parmenter, C. D. J., Fay, M. W., Smith, E. F., Rance, G. A., He, Y., Zhang, F., Liu, Y., Irvine, D. J., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-17391-1 · Cited by 76
Ahangar, P., Akoury, E., Luna, A. S. R. G., Nour, A., Weber, M. H., & Rosenzweig, D. H. (2018) · Materials · doi:10.3390/ma11091485 · Cited by 76
Self-citationMa, Y., Hu, N., Liu, J., Zhai, X., Wu, M., Hu, C., Li, L., Lai, Y., Pan, H., Lu, W. W., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b20323 · Cited by 71
Bioprinting Cellularized Constructs Using a Tissue-specific Hydrogel Bioink
Skardal, A., Devarasetty, M., Kang, H.-W., Seol, Y.-J., Forsythe, S. D., Bishop, C., Shupe, T., Soker, S., & Atala, A. (2016) · Journal of Visualized Experiments · doi:10.3791/53606 · Cited by 65
Singh, A. V., Ansari, M. H. D., Wang, S., Laux, P., Luch, A., Kumar, A., Patil, R., & Nußberger, S. (2019) · Applied Sciences · doi:10.3390/app9040811 · Cited by 65
Bioprinting Cartilage Tissue from Mesenchymal Stem Cells and PEG Hydrogel
Gao, G., Hubbell, K., Schilling, A. F., Dai, G., & Cui, X. (2017) · Methods in molecular biology · doi:10.1007/978-1-4939-7021-6_28 · Cited by 63
Spontaneously-forming spheroids as anin vitrocancer cell model for anticancer drug screening
Theodoraki, M. A., Júnior, C. D. O. R., Chantarasriwong, O., Corben, A. D., Theodorakis, E. A., & Alpaugh, M. L. (2015) · Oncotarget · doi:10.18632/oncotarget.4013 · Cited by 60
3D Printed Absorber for Capturing Chemotherapy Drugs before They Spread through the Body
Oh, H. J., Aboian, M., Yi, M. Y. J., Maslyn, J. A., Loo, W. S., Jiang, X., Parkinson, D. Y., Wilson, M. W., Moore, T., Yee, C. R., et al. (2019) · ACS Central Science · doi:10.1021/acscentsci.8b00700 · Cited by 58
Regenerative medicine and 3D bioprinting for human space exploration and planet colonisation
Ghidini, T. (2018) · Journal of Thoracic Disease · doi:10.21037/jtd.2018.03.19 · Cited by 54
Yang, Y., Du, T., Zhang, J., Kang, T., Luo, L., Tao, J., Gou, Z., Chen, S., Du, Y., He, J., et al. (2017) · Advanced Science · doi:10.1002/advs.201600491 · Cited by 43
Progress in three-dimensional bioprinting
Feinberg, A. W., & Miller, J. S. (2017) · MRS Bulletin · doi:10.1557/mrs.2017.166 · Cited by 43
Kim, Y., Kang, K., Yoon, S., Kim, J. S., Park, S. A., Kim, W. D., Lee, S. B., Ryu, K., Jeong, J., & Choi, D. (2018) · Organogenesis · doi:10.1080/15476278.2018.1423931 · Cited by 42
Kaempfen, A., Todorov, A., Güven, S., Largo, R. D., Jaquiéry, C., Scherberich, A., Martín, I., & Schaefer, D. J. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms160612616 · Cited by 36
Made-on-demand, complex and personalized 3D-printed drug products
Osouli-Bostanabad, K., & Adibkia, K. (2018) · Bioimpacts · doi:10.15171/bi.2018.09 · Cited by 36
Large-scale pharmacological profiling of 3D tumor models of cancer cells
Griner, L. A. M., Zhang, X., Guha, R., McKnight, C. G., Goldlust, I. S., Lal‐Nag, M., Wilson, K. M., Michael, S., Titus, S., Shinn, P., et al. (2016) · Cell Death and Disease · doi:10.1038/cddis.2016.360 · Cited by 35
Software tools for cell culture-related 3D printed structures
Gulyás, M., Csiszer, M., Méhes, E., & Czirók, A. (2018) · PLoS ONE · doi:10.1371/journal.pone.0203203 · Cited by 34
Bioprinting Cellularized Constructs Using a Tissue-specific Hydrogel Bioink
Skardal, A., Devarasetty, M., Kang, H., Seol, Y., Forsythe, S. D., Bishop, C. E., Shupe, T. D., Söker, S., & Atala, A. (2016) · Journal of Visualized Experiments · doi:10.3791/53606-v · Cited by 22
Akoury, E., Weber, M. H., & Rosenzweig, D. H. (2019) · MRS Advances · doi:10.1557/adv.2019.156 · Cited by 20
Self-citationGeometric confinement is required for recovery and maintenance of chondrocyte phenotype in alginate
Cooke, M. E., Pearson, M. J., Moakes, R. J. A., Weston, C. J., Davis, E. T., Jones, S. W., & Grover, L. M. (2017) · APL Bioengineering · doi:10.1063/1.5006752 · Cited by 19
Self-citation
Cited by
Wang, H., Zhang, W., Ladika, D., Yu, H., Gailevičius, D., Wang, H., Pan, C., Nair, P. N. S., Ke, Y., Mori, T., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214211 · Cited by 401
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Bhuvanesh Kumar, M., & Sathiya, P. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107228 · Cited by 372
The role of additive manufacturing for biomedical applications: A critical review
Kumar, R., Kumar, M., & Chohan, J. S. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.02.022 · Cited by 367
Jaisingh Sheoran, A., & Kumar, H. (2020) · Materials Today: Proceedings · doi:10.1016/j.matpr.2019.11.296 · Cited by 342
Siddique, S. H., Hazell, P. J., Wang, H., Escobedo, J. P., & Ameri, A. A. H. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.103051 · Cited by 339
Metadata
- Authors
- Ahangar, P., Cooke, M. E., Weber, M. H., & Rosenzweig, D. H.
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2019-04-25
- Volume
- 9
- Issue
- 8
- Pages
- 1713
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W2940557726
- Cited by
- 309
- References
- 134
- FWCI
- 13.02
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.