CoChat

Recent Progress on Biodegradable Tissue Engineering Scaffolds Prepared by Thermally-Induced Phase Separation (TIPS)

Open access
Zeinali, Reza, del Valle, Luis J., Torras, Joan, Puiggalí, Jordi · 2021 · International Journal of Molecular Sciences
Cited by 145

The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.

Abstract

Porous biodegradable scaffolds provide a physical substrate for cells allowing them to attach, proliferate and guide the formation of new tissues. A variety of techniques have been developed to fabricate tissue engineering (TE) scaffolds, among them the most relevant is the thermally-induced phase separation (TIPS). This technique has been widely used in recent years to fabricate three-dimensional (3D) TE scaffolds. Low production cost, simple experimental procedure and easy processability together with the capability to produce highly porous scaffolds with controllable architecture justify the popularity of TIPS. This paper provides a general overview of the TIPS methodology applied for the preparation of 3D porous TE scaffolds. The recent advances in the fabrication of porous scaffolds through this technique, in terms of technology and material selection, have been reviewed. In addition, how properties can be effectively modified to serve as ideal substrates for specific target cells has been specifically addressed. Additionally, examples are offered with respect to changes of TIPS procedure parameters, the combination of TIPS with other techniques and innovations in polymer or filler selection.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/ijms22073504

Cites

13 of 13 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 13 references

Research works printed but not linked: 265

  1. Martina, 2007, Biodegradable polymers applied in tissue engineering research: A review, Polym. Int., 56, 145, 10.1002/pi.2108 · DOI · Paper page
  2. Bacakova, 2018, Stem cells: Their source, potency and use in regenerative therapies with focus on adipose-derived stem cells—A review, Biotechnol. Adv., 36, 1111, 10.1016/j.biotechadv.2018.03.011 · DOI · Paper page
  3. Hutmacher, 2000, Scaffolds in tissue engineering bone and cartilage, Biomaterials, 21, 2529, 10.1016/S0142-9612(00)00121-6 · DOI · Paper page
  4. Hollister, 2005, Porous scaffold design for tissue engineering, Nat. Mater., 4, 518, 10.1038/nmat1421 · DOI · Paper page
  5. Armentano, 2010, Biodegradable polymer matrix nanocomposites for tissue engineering: A review, Polym. Degrad. Stab., 95, 2126, 10.1016/j.polymdegradstab.2010.06.007 · DOI · Paper page
  6. Armentano, 2013, Multifunctional nanostructured PLA materials for packaging and tissue engineering, Prog. Polym. Sci., 38, 1720, 10.1016/j.progpolymsci.2013.05.010 · DOI · Paper page
  7. Zeltinger, 2001, Effect of pore size and void fraction on cellular adhesion, proliferation, and matrix deposition, Tissue Eng., 7, 557, 10.1089/107632701753213183 · DOI · Paper page
  8. Karageorgiou, 2005, Porosity of 3D biomaterial scaffolds and osteogenesis, Biomaterials, 26, 5474, 10.1016/j.biomaterials.2005.02.002 · DOI · Paper page
  9. Pellis, 2017, Enzyme-catalyzed functionalization of poly(L-lactic acid) for drug delivery applications, Process. Biochem., 59, 77, 10.1016/j.procbio.2016.10.014 · DOI
  10. Dorati, R., DeTrizio, A., Modena, T., Conti, B., Benazzo, F., Gastaldi, G., and Genta, I. (2017). Biodegradable Scaffolds for Bone Regeneration Combined with Drug-Delivery Systems in Osteomyelitis Therapy. Pharmaceuticals, 10. · DOI · Paper page
  11. (2017). Biomaterials: Silk gland mimic spins strong fibres. Nature, 541, 137. · doi:10.1038/541137b
  12. Molpeceres, 2019, PLLA/nHA Composite Films and Scaffolds for Medical Implants: In Vitro Degradation, Thermal and Mechanical Properties, J. Inorg. Organomet. Polym. Mater., 29, 121, 10.1007/s10904-018-0972-y · DOI
  13. Guo, 2019, Fabrication and characterization of poly (ethylenimine) modified poly (l-lactic acid) nanofibrous scaffolds, J. Biomater. Sci. Polym. Ed., 30, 1523, 10.1080/09205063.2019.1648015 · DOI
  14. Onder, 2019, Critical parameters controlling the properties of monolithic poly(lactic acid) foams prepared by thermally induced phase separation, J. Polym. Sci. Part B Polym. Phys., 57, 98, 10.1002/polb.24762 · DOI
  15. Bernardini, 2015, Human platelet releasates combined with polyglycolic acid scaffold promote chondrocyte differentiation and phenotypic maintenance, J. Biosci., 40, 61, 10.1007/s12038-014-9492-2 · doi:10.1007/s12038-014-9492-2
  16. Ding, 2016, Bone Marrow Mesenchymal Stem Cell-Based Engineered Cartilage Ameliorates Polyglycolic Acid/Polylactic Acid Scaffold-Induced Inflammation Through M2 Polarization of Macrophages in a Pig Model, Stem Cells Transl. Med., 5, 1079, 10.5966/sctm.2015-0263 · DOI
  17. Kumawat, 2019, Microporous biocomposite scaffolds with tunable degradation and interconnected microarchitecture-A synergistic integration of bioactive chain silicate glass-ceramic and poly(ε-caprolactone), Polym. Degrad. Stab., 165, 20, 10.1016/j.polymdegradstab.2019.04.017 · DOI
  18. Yao, 2020, One-pot porogen free method fabricated porous microsphere-aggregated 3D PCL scaffolds for bone tissue engineering, J. Biomed. Mater. Res. B Appl. Biomater., 108, 2699, 10.1002/jbm.b.34601 · DOI
  19. Puerto, 2020, Hydrolytic degradation and cytotoxicity of poly(lactic-co-glycolic acid)/multiwalled carbon nanotubes for bone regeneration, J. Appl. Polym. Sci., 137, 48439, 10.1002/app.48439 · DOI
  20. McKenna, 2019, Integration of an ultra-strong poly(lactic-co-glycolic acid) (PLGA) knitted mesh into a thermally induced phase separation (TIPS) PLGA porous structure to yield a thin biphasic scaffold suitable for dermal tissue engineering, Biofabrication, 12, 015015, 10.1088/1758-5090/ab4053 · DOI
  21. Liu, 2019, I-Optimal design of poly(lactic-co-glycolic) acid/hydroxyapatite three-dimensional scaffolds produced by thermally induced phase separation, Polym. Eng. Sci., 59, 1146, 10.1002/pen.25094 · DOI
  22. Yousefi, 2019, I-Optimal Design of Hierarchical 3D Scaffolds Produced by Combining Additive Manufacturing and Thermally Induced Phase Separation, ACS Appl. Bio Mater., 2, 685, 10.1021/acsabm.8b00534 · DOI
  23. Piao, 2007, Effects of cardiac patches engineered with bone marrow-derived mononuclear cells and PGCL scaffolds in a rat myocardial infarction model, Biomaterials, 28, 641, 10.1016/j.biomaterials.2006.09.009 · DOI
  24. Chen, 2020, Preparation and Characterization of Poly(L-lactide-co-glycolide-co-ε-caprolactone) Scaffolds by Thermally Induced Phase Separation, J. Macromol. Sci. B, 59, 427, 10.1080/00222348.2020.1735136 · DOI
  25. Fernandes, 2013, Progress in Bionanocomposites: From green plastics to biomedical applications, Prog. Polym. Sci., 38, 1391, 10.1016/j.progpolymsci.2013.07.004 · doi:10.1016/j.progpolymsci.2013.07.004
  26. Nie, 2013, Hydroxyapatite/poly-l-lactide nanocomposites coating improves the adherence and proliferation of human bone mesenchymal stem cells on porous biphasic calcium phosphate scaffolds, Mater. Lett., 92, 25, 10.1016/j.matlet.2012.10.077 · doi:10.1016/j.matlet.2012.10.077
  27. Roeder, 2008, Hydroxyapatite-reinforced polymer biocomposites for synthetic bone substitutes, JOM, 60, 38, 10.1007/s11837-008-0030-2 · DOI
  28. Wilberforce, 2011, The influence of hydroxyapatite (HA) microparticles (m) and nanoparticles (n) on the thermal and dynamic mechanical properties of poly-l-lactide, Polymer, 52, 2883, 10.1016/j.polymer.2011.04.028 · DOI
  29. Davachi, 2016, Investigating thermal, mechanical and rheological properties of novel antibacterial hybrid nanocomposites based on PLLA/triclosan/nano-hydroxyapatite, Polymer, 90, 232, 10.1016/j.polymer.2016.03.007 · DOI
  30. Pietrasik, 2008, Hydroxyapatite: An Environmentally Friendly Filler for Elastomers, Mol. Cryst. Liq. Cryst., 483, 172, 10.1080/15421400801904880 · doi:10.1080/15421400801904880
  31. Hickey, 2015, Adding MgO nanoparticles to hydroxyapatite-PLLA nanocomposites for improved bone tissue engineering applications, Acta Biomater., 14, 175, 10.1016/j.actbio.2014.12.004 · DOI · Paper page
  32. Marques, 2017, Biocompatibility and antimicrobial activity of biphasic calcium phosphate powders doped with metal ions for regenerative medicine, Ceram. Int., 43, 15719, 10.1016/j.ceramint.2017.08.133 · DOI
  33. Zhang, 2008, Surface modification of beta-tricalcium phosphate scaffolds with topological nanoapatite coatings, Mater. Sci. Eng. C, 28, 1330, 10.1016/j.msec.2008.02.004 · doi:10.1016/j.msec.2008.02.004
  34. Zhang, 2017, Preparation and Properties of Novel Maleated Poly (D, L-lactide-co-glycolide) Porous Scaffolds for Tissue Engineering, J. Macromol. Sci. Part B Phys., 56, 505, 10.1080/00222348.2017.1330132 · DOI
  35. Duan, 2019, Biocompatibility properties of composite scaffolds based on 1,4-butanediamine modified poly(lactide-co-glycolide) and nanobioceramics, Int. J. Polym. Anal. Charact., 24, 428, 10.1080/1023666X.2019.1602908 · DOI
  36. Whang, 1995, A novel method to fabricate bioabsorbable scaffolds, Polymer, 36, 837, 10.1016/0032-3861(95)93115-3 · DOI · Paper page
  37. Sultana, 2008, Fabrication of HA/PHBV composite scaffolds through the emulsion freezing/freeze-drying process and characterisation of the scaffolds, J. Mater. Sci. Mater. Med., 19, 2555, 10.1007/s10856-007-3214-3 · DOI · Paper page
  38. An, 2015, Design and 3D Printing of Scaffolds and Tissues, Engineering, 1, 261, 10.15302/J-ENG-2015061 · DOI · Paper page
  39. Ji, 2012, Fabrication of poly-DL-lactide/polyethylene glycol scaffolds using the gas foaming technique, Acta Biomater., 8, 570, 10.1016/j.actbio.2011.09.028 · DOI
  40. Dehghani, 2011, Engineering porous scaffolds using gas-based techniques, Curr. Opin. Biotechnol., 22, 661, 10.1016/j.copbio.2011.04.005 · DOI · Paper page
  41. Franco, 2016, Electrospun biodegradable polymers loaded with bactericide agents, AIMS Mol. Sci., 3, 52, 10.3934/molsci.2016.1.52 · DOI
  42. Llorens, 2013, Nanomembranes and Nanofibers from Biodegradable Conducting Polymers, Polymers, 5, 1115, 10.3390/polym5031115 · DOI
  43. Camps, 2011, Electrospinning of polylactide and polycaprolactone mixtures for preparation of materials with tunable drug release properties, J. Polym. Res., 18, 1903, 10.1007/s10965-011-9597-3 · DOI
  44. Zeinali, R., Khorasani, M.T., Behnamghader, A., Atai, M., Valle, L., and Puiggalí, J. (2020). Poly(hydroxybutyrate-co-hydroxyvalerate) Porous Matrices from Thermally Induced Phase Separation. Polymers, 12. · doi:10.3390/polym12122787
  45. Molladavoodi, 2013, Investigation of microstructure, mechanical properties and cellular viability of poly(L-lactic acid) tissue engineering scaffolds prepared by different thermally induced phase separation protocols, J. Mech. Behav. Biomed. Mater., 17, 186, 10.1016/j.jmbbm.2012.08.021 · DOI
  46. Flaibani, 2012, Gas anti-solvent precipitation assisted salt leaching for generation of micro- and nano-porous wall in bio-polymeric 3D scaffolds, Mater. Sci. Eng. C, 32, 1632, 10.1016/j.msec.2012.04.054 · doi:10.1016/j.msec.2012.04.054
  47. Palumbo, 2016, Modulation of physical and biological properties of a composite PLLA and polyaspartamide derivative obtained via thermally induced phase separation (TIPS) technique, Mater. Sci. Eng. C, 67, 561, 10.1016/j.msec.2016.05.040 · DOI
  48. Lombardo, 2019, PLLA scaffolds with controlled architecture as potential microenvironment for in vitro tumor model, Tissue Cell, 58, 33, 10.1016/j.tice.2019.04.004 · DOI
  49. Pavia, 2008, PLLA/PLA scaffolds prepared via Thermally Induced Phase Separation (TIPS): Tuning of properties and biodegradability, Int. J. Mater. Form., 1, 619, 10.1007/s12289-008-0332-5 · DOI
  50. Schugens, 1996, Biodegradable and macroporous polylactide implants for cell transplantation: 1. Preparation of macroporous polylactide supports by solid-liquid phase separation, Polymer, 37, 1027, 10.1016/0032-3861(96)87287-9 · DOI · Paper page
  51. Salehi, 2018, Sciatic nerve regeneration by transplantation of Schwann cells via erythropoietin controlled-releasing polylactic acid/multiwalled carbon nanotubes/gelatin nanofibrils neural guidance conduit, J. Biomed. Mater. Res. B Appl. Biomater., 106, 1463, 10.1002/jbm.b.33952 · DOI
  52. Kasoju, 2016, Polymer scaffolds with no skin-effect for tissue engineering applications fabricated by thermally induced phase separation, Biomed. Mater., 11, 015002, 10.1088/1748-6041/11/1/015002 · DOI
  53. Bruns, N., and Kilbinger, A.F.M. (2017). Materials for Tissue Engineering and 3D Cell Culture. Bio-Inspired Polymers, The Royal Society of Chemistry. · doi:10.1039/9781782626664
  54. Lou, 2016, Fabrication and biocompatibility of poly(l-lactic acid) and chitosan composite scaffolds with hierarchical microstructures, Mater. Sci. Eng. C, 64, 341, 10.1016/j.msec.2016.03.107 · DOI
  55. Guo, 2019, Facile preparation of a controlled-release tubular scaffold for blood vessel implantation, J. Colloid Interface Sci., 539, 351, 10.1016/j.jcis.2018.12.086 · doi:10.1016/j.jcis.2018.12.086
  56. Farzamfar, 2019, A novel polycaprolactone/carbon nanofiber composite as a conductive neural guidance channel: An in vitro and in vivo study, Prog. Biomater., 8, 239, 10.1007/s40204-019-00121-3 · DOI · Paper page
  57. Szustakiewicz, 2019, The influence of hydroxyapatite content on properties of poly(L-lactide)/hydroxyapatite porous scaffolds obtained using thermal induced phase separation technique, Eur. Polym. J., 113, 313, 10.1016/j.eurpolymj.2019.01.073 · DOI
  58. Yao, 2020, Nanoclay-functionalized 3D nanofibrous scaffolds promote bone regeneration, J. Mater. Chem. B, 8, 3842, 10.1039/C9TB02814E · DOI
  59. Dai, 2018, Regeneration of osteochondral defects in vivo by a cell-free cylindrical poly(lactide-co-glycolide) scaffold with a radially oriented microstructure, J. Tissue Eng. Regen. Med., 12, e1647, 10.1002/term.2592 · DOI
  60. Zhu, 2020, 3D poly (L-lactide)/chitosan micro/nano fibrous scaffolds functionalized with quercetin-polydopamine for enhanced osteogenic and anti-inflammatory activities, Chem. Eng. J., 391, 123524, 10.1016/j.cej.2019.123524 · DOI
  61. Gay, 2018, PLA scaffolds production from Thermally Induced Phase Separation: Effect of process parameters and development of an environmentally improved route assisted by supercritical carbon dioxide, J. Supercrit. Fluids, 136, 123, 10.1016/j.supflu.2018.02.015 · DOI
  62. Chen, 2010, A morphological study of porous polylactide scaffolds prepared by thermally induced phase separation, J. Taiwan. Inst. Chem. Eng., 41, 229, 10.1016/j.jtice.2009.08.008 · DOI
  63. Wang, L., Kang, Y., Chen, S., Mo, X., Jiang, J., Yan, X., Zhu, T., and Zhao, J. (2020). Macroporous 3D Scaffold with Self-Fitting Capability for Effectively Repairing Massive Rotator Cuff Tear. ACS Biomater. Sci. Eng. · DOI
  64. Chen, 2018, Conductive nanofibrous composite scaffolds based on in-situ formed polyaniline nanoparticle and polylactide for bone regeneration, J. Colloid Interface Sci., 514, 517, 10.1016/j.jcis.2017.12.062 · DOI
  65. Zhang, 2020, Nanofibrous polyester-polypeptide block copolymer scaffolds with high porosity and controlled degradation promote cell adhesion, proliferation and differentiation, Eur. Polym. J., 130, 109647, 10.1016/j.eurpolymj.2020.109647 · DOI
  66. Gandolfi, 2019, Highly porous polycaprolactone scaffolds doped with calcium silicate and dicalcium phosphate dihydrate designed for bone regeneration, Mater. Sci. Eng. C, 102, 341, 10.1016/j.msec.2019.04.040 · DOI
  67. Farzamfar, 2019, Tetracycline hydrochloride-containing poly (ε-caprolactone)/poly lactic acid scaffold for bone tissue engineering application: In vitro and in vivo study, Int. J. Polym. Mater. Polym. Biomater., 68, 472, 10.1080/00914037.2018.1466133 · DOI
  68. Xu, 2020, Optimizing Anisotropic Polyurethane Scaffolds to Mechanically Match with Native Myocardium, ACS Biomater. Sci. Eng., 6, 2757, 10.1021/acsbiomaterials.9b01860 · DOI
  69. Feng, 2020, Influence of pore architectures of silk fibroin/collagen composite scaffolds on the regeneration of osteochondral defects in vivo, J. Mater. Chem. B, 8, 391, 10.1039/C9TB01558B · DOI · Paper page
  70. Dinescu, 2018, Porous poly(L-lactic acid) nanocomposite scaffolds with functionalized TiO2 nanoparticles: Properties, cytocompatibility and drug release capability, J. Mater. Sci., 53, 11151, 10.1007/s10853-018-2415-0 · DOI
  71. Montanheiro, 2019, Evaluation of cellulose nanocrystal addition on morphology, compression modulus and cytotoxicity of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) scaffolds, J. Mater. Sci., 54, 7198, 10.1007/s10853-019-03398-8 · DOI
  72. Erickson, 2019, Chitosan-based composite bilayer scaffold as an in vitro osteochondral defect regeneration model, Biomed. Microdevices, 21, 34, 10.1007/s10544-019-0373-1 · DOI
  73. Conoscenti, 2019, Human nasoseptal chondrocytes maintain their differentiated phenotype on PLLA scaffolds produced by thermally induced phase separation and supplemented with bioactive glass 1393, Connect. Tissue Res., 60, 344, 10.1080/03008207.2018.1539083 · DOI
  74. Chiellini, 2019, Highly porous PHB-based bioactive scaffolds for bone tissue engineering by in situ synthesis of hydroxyapatite, Mater. Sci. Eng. C, 100, 286, 10.1016/j.msec.2019.03.014 · DOI · Paper page
  75. Gandolfi, M.G., Gardin, C., Zamparini, F., Ferroni, L., Esposti, M.D., Parchi, G., Ercan, B., Manzoli, L., Fava, F., and Fabbri, P. (2020). Mineral-Doped Poly(L-lactide) Acid Scaffolds Enriched with Exosomes Improve Osteogenic Commitment of Human Adipose-Derived Mesenchymal Stem Cells. Nanomaterials, 10. · DOI
  76. Si, 2019, Controlled degradable chitosan/collagen composite scaffolds for application in nerve tissue regeneration, Polym. Degrad. Stab., 166, 73, 10.1016/j.polymdegradstab.2019.05.023 · DOI
  77. Salehi, 2019, Fabrication of Poly(L-Lactic Acid)/Chitosan Scaffolds by Solid-Liquid Phase Separation Method for Nerve Tissue Engineering: An In Vitro Study on Human Neuroblasts, J. Craniofac. Surg., 30, 784, 10.1097/SCS.0000000000005398 · DOI
  78. Dijkstra, 1996, Phase separation processes in polymer solutions in relation to membrane formation, J. Membr. Sci., 117, 1, 10.1016/0376-7388(96)00088-9 · DOI · Paper page
  79. Auras, R., Lim, L.-T., Selke, S., and Tsuji, H. (2010). Poly(Lactic Acid): Synthesis, Structures, Properties, Processing, and Applications, John Wiley & Sons. · DOI · Paper page
  80. Ma, P.X., and Elisseeff, J. (2006). Polymer phase separation. Scaffolding in Tissue Engineering, Taylor & Francis. · DOI · Paper page
  81. Zhang, 1999, Poly(α-hydroxyl acids)/hydroxyapatite porous composites for bone-tissue engineering. I. Preparation and morphology, J. Biomed. Mater. Res., 44, 446, 10.1002/(SICI)1097-4636(19990315)44:4<446::AID-JBM11>3.0.CO;2-F · DOI · Paper page
  82. Ma, 2001, Microtubular architecture of biodegradable polymer scaffolds, J. Biomed. Mater. Res., 56, 469, 10.1002/1097-4636(20010915)56:4<469::AID-JBM1118>3.0.CO;2-H · DOI · Paper page
  83. Schugens, 1996, Polylactide macroporous biodegradable implants for cell transplantation. II. Preparation of polylactide foams by liquid-liquid phase separation, J. Biomed. Mater. Res., 30, 449, 10.1002/(SICI)1097-4636(199604)30:4<449::AID-JBM3>3.0.CO;2-P · DOI · Paper page
  84. Nam, 1999, Biodegradable polymeric microcellular foams by modified thermally induced phase separation method, Biomaterials, 20, 1783, 10.1016/S0142-9612(99)00073-3 · DOI · Paper page
  85. Flory, P.J. (1953). Principles of Polymer Chemistry, Cornell University Press.
  86. Lloyd, 1991, Microporous membrane formation via thermally-induced phase separation. II. Liquid—liquid phase separation, J. Membr. Sci., 64, 1, 10.1016/0376-7388(91)80073-F · DOI · Paper page
  87. 2016, Fabrication of rigid poly(lactic acid) foams via thermally induced phase separation, Polymer, 107, 240, 10.1016/j.polymer.2016.11.025 · DOI
  88. Wislet, S. (2011). Scaffolds for Tissue Engineering Via Thermally Induced Phase Separation. Advances in Regenerative Medicine, IntechOpen. · doi:10.5772/1294
  89. Conoscenti, 2017, A Versatile Technique to Produce Porous Polymeric Scaffolds: The Thermally Induced Phase Separation (TIPS) Method, Arch. Chem. Res., 1, 1, 10.21767/2572-4657.100012 · DOI
  90. Pavia, 2008, Polymeric scaffolds prepared via thermally induced phase separation: Tuning of structure and morphology, J. Biomed. Mater. Res. A, 86A, 459, 10.1002/jbm.a.31621 · DOI
  91. Ma, 1999, Synthetic nano-scale fibrous extracellular matrix, J. Biomed. Mater. Res., 46, 60, 10.1002/(SICI)1097-4636(199907)46:1<60::AID-JBM7>3.0.CO;2-H · DOI · Paper page
  92. He, 2009, Fabrication and characterization of poly(l-lactic acid) 3D nanofibrous scaffolds with controlled architecture by liquid–liquid phase separation from a ternary polymer–solvent system, Polymer, 50, 4128, 10.1016/j.polymer.2009.06.025 · DOI
  93. Salerno, 2014, Making microporous nanometre-scale fibrous PLA aerogels with clean and reliable supercritical CO2 based approaches, Microporous Mesoporous Mater., 184, 162, 10.1016/j.micromeso.2013.10.019 · DOI
  94. Ma, 2001, Engineering new bone tissue in vitro on highly porous poly(α-hydroxyl acids)/hydroxyapatite composite scaffolds, J. Biomed. Mater. Res., 54, 284, 10.1002/1097-4636(200102)54:2<284::AID-JBM16>3.0.CO;2-W · DOI · Paper page
  95. Yang, 2004, Fabrication of nano-structured porous PLLA scaffold intended for nerve tissue engineering, Biomaterials, 25, 1891, 10.1016/j.biomaterials.2003.08.062 · DOI · Paper page
  96. Cao, 2006, Systematic selection of solvents for the fabrication of 3D combined macro- and microporous polymeric scaffolds for soft tissue engineering, J. Biomater. Sci. Polym. Ed., 17, 369, 10.1163/156856206776374142 · DOI
  97. Vaquette, 2013, A simple method for fabricating 3-D multilayered composite scaffolds, Acta Biomater., 91, 4599, 10.1016/j.actbio.2012.08.015 · DOI
  98. Iwahashi, 2011, Phase behavior of binary mixtures composed of ethylene carbonate and various organic solvents, J. Chem. Thermodyn., 43, 80, 10.1016/j.jct.2010.08.015 · DOI
  99. Kenar, 2010, Latent heat characteristics of biobased oleochemical carbonates as potential phase change materials, Sol. Energy Mater. Sol. Cells, 94, 1697, 10.1016/j.solmat.2010.05.031 · DOI
  100. Bonner, 1969, Comparison of the osmotic and activity coefficients of some solutes in structured solvents, J. Phys. Chem., 73, 1968, 10.1021/j100726a054 · doi:10.1021/j100726a054
  101. Wexler, P. (2014). Dioxane, 1,4. Encyclopedia of Toxicology, Academic Press. [3rd ed.].
  102. Wexler, P. (2014). Tetrahydrofuran. Encyclopedia of Toxicology, Academic Press. [3rd ed.].
  103. Sodian, 2000, Technical Report: Fabrication of a Trileaflet Heart Valve Scaffold from a Polyhydroxyalkanoate Biopolyester for Use in Tissue Engineering, Tissue Eng., 6, 183, 10.1089/107632700320793 · DOI · Paper page
  104. Koegler, 2002, Carbon dioxide extraction of residual chloroform from biodegradable polymers, J. Biomed. Mater. Res., 63, 567, 10.1002/jbm.10209 · DOI
  105. Lloyd, 1990, Microporous membrane formation via thermally induced phase separation. I. Solid-liquid phase separation, J. Membr. Sci., 52, 239, 10.1016/S0376-7388(00)85130-3 · DOI · Paper page
  106. Povh, 2001, Supercritical CO2 extraction of essential oil and oleoresin from chamomile (Chamomilla recutita [L.] Rauschert), J. Supercrit. Fluids, 21, 245, 10.1016/S0896-8446(01)00096-1 · DOI
  107. Dourani, 2019, Multi-walled carbon nanotube and carbon nanofiber/polyacrylonitrile aerogel scaffolds for enhanced epoxy resins, Compos. B Eng., 176, 107299, 10.1016/j.compositesb.2019.107299 · DOI
  108. Aradhana, 2018, High performance epoxy nanocomposite adhesive: Effect of nanofillers on adhesive strength, curing and degradation kinetics, Int. J. Adhes. Adhes., 84, 238, 10.1016/j.ijadhadh.2018.03.013 · doi:10.1016/j.ijadhadh.2018.03.013
  109. Wang, 2019, Controllability of epoxy equivalent weight and performance of hyperbranched epoxy resins, Compos. B Eng., 160, 615, 10.1016/j.compositesb.2018.12.103 · DOI
  110. Hutmacher, 2001, Scaffold design and fabrication technologies for engineering tissues—State of the art and future perspectives, J. Biomater. Sci. Polym. Ed., 12, 107, 10.1163/156856201744489 · DOI · Paper page
  111. Tomlins, P. (2016). Designing and modeling pore size distribution in tissue scaffolds. Characterisation and Design of Tissue Scaffolds, Woodhead Publishing, Langford Lane. · DOI
  112. Liu, 2013, Review: Development of clinically relevant scaffolds for vascularised bone tissue engineering, Biotechnol. Adv., 31, 688, 10.1016/j.biotechadv.2012.10.003 · DOI · Paper page
  113. Akbarzadeh, 2015, Hierarchical polymeric scaffolds support the growth of MC3T3-E1 cells, J. Mater. Sci. Mater. Med., 26, 116, 10.1007/s10856-015-5453-z · DOI
  114. Gandolfi, 2018, Polylactic acid-based porous scaffolds doped with calcium silicate and dicalcium phosphate dihydrate designed for biomedical application, Mater. Sci. Eng. C, 82, 163, 10.1016/j.msec.2017.08.040 · DOI
  115. Mannella, 2016, Phase separation of polymer blends in solution: A case study, Eur. Polym. J., 79, 176, 10.1016/j.eurpolymj.2016.04.025 · DOI
  116. Wang, 2004, Notch1-expressing cells are indispensable for prostatic branching morphogenesis during development and re-growth following castration and androgen replacement, J. Biol. Chem., 279, 24733, 10.1074/jbc.M401602200 · DOI · Paper page
  117. Roy, 2003, Performance of degradable composite bone repair products made via three-dimensional fabrication techniques, J. Biomed. Mater. Res. A, 66A, 283, 10.1002/jbm.a.10582 · DOI · Paper page
  118. Chen, 2001, Poly(DL-lactic-co-glycolic acid) sponge hybridized with collagen microsponges and deposited apatite particulates, J. Biomed. Mater. Res., 57, 8, 10.1002/1097-4636(200110)57:1<8::AID-JBM1135>3.0.CO;2-H · DOI
  119. Fabbri, 2010, Highly porous polycaprolactone-45S5 Bioglass® scaffolds for bone tissue engineering, Compos. Sci. Technol., 70, 1869, 10.1016/j.compscitech.2010.05.029 · DOI
  120. Amini, 2012, Optimally Porous and Biomechanically Compatible Scaffolds for Large-Area Bone Regeneration, Tissue Eng. Part A, 18, 1376, 10.1089/ten.tea.2011.0076 · DOI · Paper page
  121. Feng, 2011, The effect of pore size on tissue ingrowth and neovascularization in porous bioceramics of controlled architecture in vivo, Biomed. Mater., 6, 015007, 10.1088/1748-6041/6/1/015007 · DOI · Paper page
  122. Liang, 2008, Functional Electrospun Nanofibrous Scaffolds for Biomedical Applications, Adv. Drug Del. Rev., 59, 1392, 10.1016/j.addr.2007.04.021 · DOI · Paper page
  123. Biswas, 2016, Combining mechanical foaming and thermally induced phase separation to generate chitosan scaffolds for soft tissue engineering, J. Biomater. Sci. Polym. Ed., 28, 1
  124. Kozehkonan, 2019, Preparation and characterization of PCL polymeric scaffolds coated with chitosan/bioactive glass/gelatin nanoparticles using the tips methodology for bone tissue engineering, Nanomed. J., 6, 311
  125. Hermida, E., Ruiz, I., Baldessari, A., Kreimann, E., Cabrini, R., Juvenal, G., Hermida, G., and Fungueiro, M. (2011, January 28–30). Biodegradation and Histological Response of PHBV Porous Scaffolds. Proceedings of the 2nd Workshop on Artificial Organs, Biomaterials and Tissue Engineering, Mar del Plata, Argentina.
  126. Samadian, 2020, A tailored polylactic acid/polycaprolactone biodegradable and bioactive 3D porous scaffold containing gelatin nanofibers and Taurine for bone regeneration, Sci. Rep., 10, 13366, 10.1038/s41598-020-70155-2 · DOI
  127. Fang, 2019, Biomimetic design and fabrication of scaffolds integrating oriented micro-pores with branched channel networks for myocardial tissue engineering, Biofabrication, 11, 035004, 10.1088/1758-5090/ab0fd3 · DOI
  128. Conoscenti, 2017, PLLA scaffolds produced by thermally induced phase separation (TIPS) allow human chondrocyte growth and extracellular matrix formation dependent on pore size, Mater. Sci. Eng. C, 80, 449, 10.1016/j.msec.2017.06.011 · DOI
  129. Rigogliuso, 2012, Use of Modified 3D Scaffolds to Improve Cell Adhesion and Drive Desired Cell Responses, Chem. Eng. Trans., 27, 415
  130. Conoscenti, 2018, In vitro degradation and bioactivity of composite poly-l-lactic (PLLA)/bioactive glass (BG) scaffolds: Comparison of 45S5 and 1393BG compositions, J. Mater. Sci., 53, 2362, 10.1007/s10853-017-1743-9 · DOI
  131. Boccaccini, 2003, Bioresorbable and bioactive composite materials based on polylactide foams filled with and coated by Bioglass® particles for tissue engineering applications, J. Mater. Sci. Mater. Med., 14, 443, 10.1023/A:1023266902662 · DOI
  132. Reverchon, 2008, A new supercritical fluid-based process to produce scaffolds for tissue replacement, J. Supercrit. Fluids, 45, 365, 10.1016/j.supflu.2008.01.005 · DOI
  133. Yin, 2016, Highly porous 3D PLLA materials composed of nanosheets, fibrous nanosheets, or nanofibrous networks: Preparation and the potential application in oil–water separation, Chem. Eng. J., 302, 1, 10.1016/j.cej.2016.05.023 · DOI
  134. Razak, 2012, Biodegradable polymers and their bone applications: A review, Int. J. Basic Appl. Sci., 12, 31
  135. Murphy, 2002, Salt Fusion: An Approach to Improve Pore Interconnectivity within Tissue Engineering Scaffolds, Tissue Eng., 8, 43, 10.1089/107632702753503045 · DOI · Paper page
  136. Rizk, 2012, Characterization, and antibacterial properties of novel silver releasing nanocomposite scaffolds fabricated by the gas foaming/salt-leaching technique, J. Genet. Eng. Biotechnol., 10, 229, 10.1016/j.jgeb.2012.07.002 · doi:10.1016/j.jgeb.2012.07.002
  137. Santran, 2009, Production, by co-grinding in a media mill, of porous biodegradable polylactic acid–apatite composite materials for bone tissue engineering, Powder Technol., 190, 89, 10.1016/j.powtec.2008.04.043 · DOI
  138. Wei, 2006, Macroporous and nanofibrous polymer scaffolds and polymer/bone-like apatite composite scaffolds generated by sugar spheres, J. Biomed. Mater. Res. A, 78A, 306, 10.1002/jbm.a.30704 · DOI · Paper page
  139. Ge, 2016, The precision structural regulation of PLLA porous scaffold and its influence on the proliferation and differentiation of MC3T3-E1 cells, J. Biomater. Sci. Polym. Ed., 27, 1685, 10.1080/09205063.2016.1229901 · DOI
  140. Li, 2015, Controlled dual delivery of BMP-2 and dexamethasone by nanoparticle-embedded electrospun nanofibers for the efficient repair of critical-sized rat calvarial defect, Biomaterials, 37, 218, 10.1016/j.biomaterials.2014.10.015 · DOI · Paper page
  141. Hou, 2018, Injectable degradable PVA microgels prepared by microfluidic technology for controlled osteogenic differentiation of mesenchymal stem cells, Acta Biomater., 77, 28, 10.1016/j.actbio.2018.07.003 · DOI · Paper page
  142. Zhou, 2017, Nonmineralized and Mineralized Collagen Scaffolds Induce Differential Osteogenic Signaling Pathways in Human Mesenchymal Stem Cells, Adv. Healthc. Mater., 6, 1700641, 10.1002/adhm.201700641 · DOI
  143. Cao, 2010, A biodegradable porous composite scaffold of PGA/beta-TCP for bone tissue engineering, Bone, 46, 386, 10.1016/j.bone.2009.09.031 · DOI · Paper page
  144. Bose, 2012, Recent advances in bone tissue engineering scaffolds, Trends Biotechnol., 30, 546, 10.1016/j.tibtech.2012.07.005 · DOI · Paper page
  145. 2014, Scaffold Design for Bone Regeneration, J. Nanosci. Nanotechnol., 14, 15, 10.1166/jnn.2014.9127 · DOI · Paper page
  146. Wang, 2010, Spiral-structured, nanofibrous, 3D scaffolds for bone tissue engineering, J. Biomed. Mater. Res. A, 93, 753, 10.1002/jbm.a.32591 · DOI
  147. Li, 2018, Current Approaches to Bone Tissue Engineering: The Interface between Biology and Engineering, Adv. Healthc. Mater., 7, 1701061, 10.1002/adhm.201701061 · DOI · Paper page
  148. Smith, 2015, The current state of scaffolds for musculoskeletal regenerative applications, Nat. Rev. Rheumatol., 11, 213, 10.1038/nrrheum.2015.27 · DOI · Paper page
  149. Zhang, 2017, 3D Bioprinting for Tissue and Organ Fabrication, Ann. Biomed. Eng., 45, 148, 10.1007/s10439-016-1612-8 · DOI · Paper page
  150. Li, 2017, The Horizon of Materiobiology: A Perspective on Material-Guided Cell Behaviors and Tissue Engineering, Chem. Rev., 117, 4376, 10.1021/acs.chemrev.6b00654 · DOI · Paper page
  151. Yao, 2017, BBP-functionalized biomimetic nanofibrous scaffolds can capture BMP2 and promote osteogenic differentiation, J. Mater. Chem. B, 5, 5196, 10.1039/C7TB00744B · DOI
  152. Yao, 2016, Hypoxia-Mimicking Nanofibrous Scaffolds Promote Endogenous Bone Regeneration, ACS Appl. Mater. Interfaces, 8, 32450, 10.1021/acsami.6b10538 · DOI
  153. Yao, 2018, Mesoporous silicate nanoparticles/3D nanofibrous scaffold-mediated dual-drug delivery for bone tissue engineering, J. Control. Release, 279, 69, 10.1016/j.jconrel.2018.04.011 · DOI
  154. Keane, 2014, Biomaterials for tissue engineering applications, Semin. Pediatr. Surg., 23, 112, 10.1053/j.sempedsurg.2014.06.010 · DOI · Paper page
  155. Prabhakaran, 2008, Surface modified electrospun nanofibrous scaffolds for nerve tissue engineering, Nanotechnology, 19, 455102, 10.1088/0957-4484/19/45/455102 · DOI · Paper page
  156. Wang, 2009, Creation of highly aligned electrospun poly-L-lactic acid fibers for nerve regeneration applications, J. Neural Eng., 6, 016001, 10.1088/1741-2560/6/1/016001 · DOI · Paper page
  157. Dong, Z. (2015). Electrospinning and Characterization of Composite Membranes for Biomedical Applications. [Ph.D. Thesis, University of Rochester].
  158. Salehi, 2015, Preparation of Pure PLLA, Pure Chitosan, and PLLA/Chitosan Blend Porous Tissue Engineering Scaffolds by Thermally Induced Phase Separation Method and Evaluation of the Corresponding Mechanical and Biological Properties, Int. J. Polym. Mater. Polym. Biomater., 64, 675, 10.1080/00914037.2014.1002093 · DOI
  159. Han, 2013, Performance of a multilayered small-diameter vascular scaffold dual-loaded with VEGF and PDGF, Biomaterials, 34, 7302, 10.1016/j.biomaterials.2013.06.006 · DOI · Paper page
  160. McKenna, 2012, Mechanical property characterization of electrospun recombinant human tropoelastin for vascular graft biomaterials, Acta Biomater., 8, 225, 10.1016/j.actbio.2011.08.001 · DOI
  161. Tillman, 2009, The in vivo stability of electrospun polycaprolactone-collagen scaffolds in vascular reconstruction, Biomaterials, 30, 583, 10.1016/j.biomaterials.2008.10.006 · DOI · Paper page
  162. Martins, 2018, Novel poly(ε-caprolactone)/amino-functionalized tannin electrospun membranes as scaffolds for tissue engineering, J. Colloid Interface Sci., 525, 21, 10.1016/j.jcis.2018.04.060 · DOI
  163. Pezzoli, 2018, Fibronectin promotes elastin deposition, elasticity and mechanical strength in cellularised collagen-based scaffolds, Biomaterials, 180, 130, 10.1016/j.biomaterials.2018.07.013 · DOI
  164. Kreutz, 2017, Fibrin clot strength measured by thrombelastography and outcomes after percutaneous coronary intervention, Thromb. Haemost., 117, 426, 10.1160/TH16-10-0496 · DOI
  165. Gong, 2015, Nanomaterials and bone regeneration, Bone Res., 3, 15029, 10.1038/boneres.2015.29 · DOI · Paper page
  166. Santos, 2008, Endothelial cell colonization and angiogenic potential of combined nano- and micro-fibrous scaffolds for bone tissue engineering, Biomaterials, 29, 4306, 10.1016/j.biomaterials.2008.07.033 · DOI · Paper page
  167. Porter, 2009, Bone tissue engineering: A review in bone biomimetics and drug delivery strategies, Biotechnol. Prog., 25, 1539, 10.1002/btpr.246 · DOI · Paper page
  168. Chen, 2019, Fabrication and Evaluation of 3D Printed Poly(l-lactide) Scaffold Functionalized with Quercetin-Polydopamine for Bone Tissue Engineering, ACS Biomater. Sci. Eng., 5, 2506, 10.1021/acsbiomaterials.9b00254 · DOI
  169. McMillan, 2007, Small-Diameter Porous Poly (ɛ-Caprolactone) Films Enhance Adhesion and Growth of Human Cultured Epidermal Keratinocyte and Dermal Fibroblast Cells, Tissue Eng., 13, 789, 10.1089/ten.2006.0321 · DOI
  170. Salem, 2002, Interactions of 3T3 fibroblasts and endothelial cells with defined pore features, J. Biomed. Mater. Res., 61, 212, 10.1002/jbm.10195 · DOI · Paper page
  171. Wang, 2015, Evaluating 3D-Printed Biomaterials as Scaffolds for Vascularized Bone Tissue Engineering, Adv. Mater., 27, 138, 10.1002/adma.201403943 · DOI · Paper page
  172. Hsu, 2016, Biodegradable polymer scaffolds, J. Mater. Chem. B, 4, 7493, 10.1039/C6TB02176J · DOI · Paper page
  173. Gumede, 2018, Review on PCL, PBS, and PCL/PBS blends containing carbon nanotubes, Express Polym. Lett., 12, 505, 10.3144/expresspolymlett.2018.43 · DOI · Paper page
  174. Xie, 2015, Ductile electroactive biodegradable hyperbranched polylactide copolymers enhancing myoblast differentiation, Biomaterials, 71, 158, 10.1016/j.biomaterials.2015.08.042 · DOI
  175. Zhao, 2014, Multifunctional Interpenetrating Polymer Network Hydrogels Based on Methacrylated Alginate for the Delivery of Small Molecule Drugs and Sustained Release of Protein, Biomacromolecules, 15, 3246, 10.1021/bm5006257 · DOI · Paper page
  176. Moriarty, T., Webster, T., and Xing, M. (2020). Biofabrication in Tissue Engineering. Racing for the Surface, Springer.
  177. Kowalski, 2018, Smart Biomaterials: Recent Advances and Future Directions, ACS Biomater. Sci. Eng., 4, 3809, 10.1021/acsbiomaterials.8b00889 · DOI · Paper page
  178. Murphy, 2010, The effect of mean pore size on cell attachment, proliferation and migration in collagen–glycosaminoglycan scaffolds for bone tissue engineering, Biomaterials, 31, 461, 10.1016/j.biomaterials.2009.09.063 · DOI · Paper page
  179. Pawelec, 2016, Collagen: A network for regenerative medicine, J. Mater. Chem. B, 4, 6484, 10.1039/C6TB00807K · DOI · Paper page
  180. LogithKumar, 2016, A review of chitosan and its derivatives in bone tissue engineering, Carbohydr. Polym., 151, 172, 10.1016/j.carbpol.2016.05.049 · DOI · Paper page
  181. Jiang, 2006, In vitro evaluation of chitosan/poly(lactic acid-glycolic acid) sintered microsphere scaffolds for bone tissue engineering, Biomaterials, 27, 4894, 10.1016/j.biomaterials.2006.05.025 · DOI · Paper page
  182. Nguyen, 2011, Coaxial electrospun poly(lactic acid)/chitosan (core/shell) composite nanofibers and their antibacterial activity, Carbohydr. Polym., 86, 1799, 10.1016/j.carbpol.2011.07.014 · DOI · Paper page
  183. Xu, 2017, Polylactic Acid Nanofiber Scaffold Decorated with Chitosan Islandlike Topography for Bone Tissue Engineering, ACS Appl. Mater. Interfaces, 9, 21094, 10.1021/acsami.7b01176 · DOI · Paper page
  184. Mallick, 2016, Evaluation of poly(L-lactide) and chitosan composite scaffolds for cartilage tissue regeneration, Des. Monomers Polym., 19, 271, 10.1080/15685551.2015.1136535 · DOI
  185. Ruiter, 2009, Designing ideal conduits for peripheral nerve repair, Neurosurg. Focus, 26, E5, 10.3171/FOC.2009.26.2.E5 · DOI · Paper page
  186. Prabaharan, 2007, Preparation and characterization of poly(L-lactic acid)-chitosan hybrid scaffolds with drug release capability, J. Biomed. Mater. Res. B Appl. Biomater., 81B, 427, 10.1002/jbm.b.30680 · DOI
  187. Liu, 2005, Chemical modification of single-walled carbon nanotubes with peroxytrifluoroacetic acid, Carbon, 43, 1470, 10.1016/j.carbon.2005.01.023 · DOI
  188. Einhorn, 2001, Bone Regeneration: New Findings and Potential Clinical Applications, J. Am. Acad. Orthop. Surg., 9, 157, 10.5435/00124635-200105000-00002 · DOI
  189. Rosset, 2015, Bone fracture healing: Cell therapy in delayed unions and nonunions, Bone, 70, 93, 10.1016/j.bone.2014.07.033 · DOI · Paper page
  190. Winkler, 2018, A review of biomaterials in bone defect healing, remaining shortcomings and future opportunities for bone tissue engineering, Bone Jt. Res., 7, 232, 10.1302/2046-3758.73.BJR-2017-0270.R1 · DOI · Paper page
  191. Kokubo, 2003, Novel bioactive materials with different mechanical properties, Biomaterials, 24, 2161, 10.1016/S0142-9612(03)00044-9 · DOI · Paper page
  192. Kalita, 2007, Nanocrystalline calcium phosphate ceramics in biomedical engineering, Mater. Sci. Eng. C, 27, 441, 10.1016/j.msec.2006.05.018 · DOI · Paper page
  193. Navarro, 2008, Biomaterials in orthopaedics, J. R. Soc. Interface, 5, 1137, 10.1098/rsif.2008.0151 · DOI · Paper page
  194. Black, 2015, Bone Tissue Engineering, Curr. Mol. Biol. Rep., 1, 132, 10.1007/s40610-015-0022-2 · DOI · Paper page
  195. Kokubo, T. (2008). Bioceramics and Their Clinical Applications, Elsevier. [1st ed.]. · DOI · Paper page
  196. Kim, 2004, Hydroxyapatite/poly(ε-caprolactone) composite coatings on hydroxyapatite porous bone scaffold for drug delivery, Biomaterials, 25, 1279, 10.1016/j.biomaterials.2003.07.003 · DOI · Paper page
  197. Sharma, 2016, Fabrication and characterization of novel nano-biocomposite scaffold of chitosan–gelatin–alginate–hydroxyapatite for bone tissue engineering, Mater. Sci. Eng. C, 64, 416, 10.1016/j.msec.2016.03.060 · DOI · Paper page
  198. Allo, 2012, Bioactive and Biodegradable Nanocomposites and Hybrid Biomaterials for Bone Regeneration, J. Funct. Biomater., 3, 432, 10.3390/jfb3020432 · DOI
  199. Goreham, 2013, Small surface nanotopography encourages fibroblast and osteoblast cell adhesion, RSC Adv., 3, 10309, 10.1039/c3ra23193c · DOI
  200. Brydone, 2010, Bone grafting, orthopaedic biomaterials, and the clinical need of bone engineering, Proc. Inst. Mech. Eng. Part H, 224, 1329, 10.1243/09544119JEIM770 · DOI · Paper page

200 of 265 shown

Cited by

Metadata

Authors
Zeinali, R., del Valle, L. J., Torras, J., & Puiggalí, J.
Venue
International Journal of Molecular Sciences
Publisher
MDPI AG
Published
2021-03-28
Volume
22
Issue
7
Pages
3504
ISSN
1422-0067 (ISSN-L)
OpenAlex
W3150600546
Cited by
145
References
13
FWCI
5.46
Type
journal article
Language
en
Open access
gold
Funders
  • Ministerio de Economía, Industria y Competitividad, Gobierno de España (RTI2018-101827-B-I00)
  • Generalitat de Catalunya (2017SGR373)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.