The DOI matches its Crossref record; 114 of the 114 references it cites were found in a registry or an index.
Fabrication Methods for Microfluidic Devices: An Overview
Open accessAbstract
Microfluidic devices offer the potential to automate a wide variety of chemical and biological operations that are applicable for diagnostic and therapeutic operations with higher efficiency as well as higher repeatability and reproducibility. Polymer based microfluidic devices offer particular advantages including those of cost and biocompatibility. Here, we describe direct and replication approaches for manufacturing of polymer microfluidic devices. Replications approaches require fabrication of mould or master and we describe different methods of mould manufacture, including mechanical (micro-cutting; ultrasonic machining), energy-assisted methods (electrodischarge machining, micro-electrochemical machining, laser ablation, electron beam machining, focused ion beam (FIB) machining), traditional micro-electromechanical systems (MEMS) processes, as well as mould fabrication approaches for curved surfaces. The approaches for microfluidic device fabrications are described in terms of low volume production (casting, lamination, laser ablation, 3D printing) and high-volume production (hot embossing, injection moulding, and film or sheet operations).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The origins and the future of microfluidics
Whitesides, G. M. (2006) · Nature · doi:10.1038/nature05058 · Cited by 9,687
Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane)
Duffy, D. C., McDonald, J. C., Schueller, O. J. A., & Whitesides, G. M. (1998) · Analytical Chemistry · doi:10.1021/ac980656z · Cited by 5,288
Xia, Y., & Whitesides, G. M. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.153 · Cited by 4,611
Monolithic Microfabricated Valves and Pumps by Multilayer Soft Lithography
Unger, M. A., Chou, H.-P., Thorsen, T., Scherer, A., & Quake, S. R. (2000) · Science · doi:10.1126/science.288.5463.113 · Cited by 4,010
Fabrication of microfluidic systems in poly(dimethylsiloxane)
McDonald, J. C., Duffy, D. C., Anderson, J. R., Chiu, D. T., Wu, H., Schueller, O. J. A., & Whitesides, G. M. (2000) · Electrophoresis · doi:10.1002/(sici)1522-2683(20000101)21:1<27::aid-elps27>3.0.co;2-c · Cited by 3,329
Solvent Compatibility of Poly(dimethylsiloxane)-Based Microfluidic Devices
Lee, J. N., Park, C., & Whitesides, G. M. (2003) · Analytical Chemistry · doi:10.1021/ac0346712 · Cited by 2,643
Fundamentals of Microfabrication
(2016) · Micromechatronics · doi:10.1201/b15830-17 · Cited by 2,109
Micromachining a Miniaturized Capillary Electrophoresis-Based Chemical Analysis System on a Chip
Harrison, D. J., Fluri, K., Seiler, K., Fan, Z., Effenhauser, C. S., & Manz, A. (1993) · Science · doi:10.1126/science.261.5123.895 · Cited by 1,800
Microfluidic devices fabricated in Poly(dimethylsiloxane) for biological studies
Sia, S. K., & Whitesides, G. M. (2003) · ELECTROPHORESIS · doi:10.1002/elps.200305584 · Cited by 1,717
Transfer printing by kinetic control of adhesion to an elastomeric stamp
Meitl, M. A., Zhu, Z.-T., Kumar, V., Lee, K. J., Feng, X., Huang, Y. Y., Adesida, I., Nuzzo, R. G., & Rogers, J. A. (2006) · Nature Materials · doi:10.1038/nmat1532 · Cited by 1,548
A hemispherical electronic eye camera based on compressible silicon optoelectronics
Ko, H. C., Stoykovich, M. P., Song, J., Malyarchuk, V., Choi, W. M., Yu, C.-J., Geddes III, J. B., Xiao, J., Wang, S., Huang, Y., et al. (2008) · Nature · doi:10.1038/nature07113 · Cited by 1,352
Becker, H. (2002) · Talanta · doi:10.1016/s0039-9140(01)00594-x · Cited by 1,187
The upcoming 3D-printing revolution in microfluidics
Bhattacharjee, N., Urrios, A., Kang, S., & Folch, A. (2016) · Lab on a Chip · doi:10.1039/c6lc00163g · Cited by 1,123
Three-dimensional micro-channel fabrication in polydimethylsiloxane (PDMS) elastomer
Jo, B.-H., Van Lerberghe, L. M., Motsegood, K. M., & Beebe, D. J. (2000) · Journal of Microelectromechanical Systems · doi:10.1109/84.825780 · Cited by 1,098
3D printed microfluidic devices: enablers and barriers
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039 · cited 1×
“Photopolymer systems use an array of inkjet printheads that deposit small volumes of build and support material in successive layers to form an object [144].”
BackgroundReview on micro molding of thermoplastic polymers
Heckele, M., & Schomburg, W. K. (2004) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/14/3/r01 · Cited by 915
Polymer microfabrication technologies for microfluidic systems
Becker, H., & Gärtner, C. (2008) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-007-1692-2 · Cited by 860
Bhattacharya, S., Datta, A., Berg, J. M., & Gangopadhyay, S. (2005) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2005.844746 · Cited by 859
SU-8: a photoresist for high-aspect-ratio and 3D submicron lithography
Campo, A. D., & Greiner, C. (2007) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/17/6/r01 · Cited by 825
Polymer microfabrication methods for microfluidic analytical applications
Becker, H., & Gärtner, C. (2000) · Electrophoresis · doi:10.1002/(sici)1522-2683(20000101)21:1<12::aid-elps12>3.0.co;2-7 · Cited by 795
Hybrid 3D Printing of Soft Electronics
Valentine, A. D., Busbee, T. A., Boley, J. W., Raney, J. R., Chortos, A., Kotikian, A., Berrigan, J. D., Durstock, M. F., & Lewis, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201703817 · Cited by 688
Ahn, S. H., & Guo, L. J. (2009) · ACS Nano · doi:10.1021/nn9003633 · Cited by 667
Microfabrication Inside Capillaries Using Multiphase Laminar Flow Patterning
Kenis, P. J. A., Ismagilov, R. F., & Whitesides, G. M. (1999) · Science · doi:10.1126/science.285.5424.83 · Cited by 659
Effenhauser, C. S., Bruin, G. J. M., Paulus, A., & Ehrat, M. (1997) · Analytical Chemistry · doi:10.1021/ac9703919 · Cited by 640
Convery, N., & Gadegaard, N. (2019) · Micro and Nano Engineering · doi:10.1016/j.mne.2019.01.003 · Cited by 602
Gale, B. K., Jafek, A. R., Lambert, C. J., Goenner, B. L., Moghimifam, H., Nze, U. C., & Kamarapu, S. K. (2018) · Inventions · doi:10.3390/inventions3030060 · Cited by 511
Disposable Microfluidic Devices: Fabrication, Function, and Application
Fiorini, G. S., & Chiu, D. T. (2005) · BioTechniques · doi:10.2144/05383rv02 · Cited by 487
Chung, H. U., Rwei, A. Y., Hourlier-Fargette, A., Xu, S., Lee, K., Dunne, E. C., Xie, Z., Liu, C., Carlini, A., Kim, D. H., et al. (2020) · Nature Medicine · doi:10.1038/s41591-020-0792-9 · Cited by 482
Micro-injection moulding of polymer microfluidic devices
Attia, U. M., Marson, S., & Alcock, J. R. (2009) · Microfluidics and Nanofluidics · doi:10.1007/s10404-009-0421-x · Cited by 474
Centrifugal microfluidic platforms: advanced unit operations and applications
Strohmeier, O., Keller, M., Schwemmer, F., Zehnle, S., Mark, D., von Stetten, F., Zengerle, R., & Paust, N. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00371c · Cited by 463
Custom 3D printer and resin for 18 μm × 20 μm microfluidic flow channels
Gong, H., Bickham, B. P., Woolley, A. T., & Nordin, G. P. (2017) · Lab on a Chip · doi:10.1039/c7lc00644f · Cited by 443
Fabrication of Submicrometer Features on Curved Substrates by Microcontact Printing
Jackman, R. J., Wilbur, J. L., & Whitesides, G. M. (1995) · Science · doi:10.1126/science.7624795 · Cited by 434
Waldbaur, A., Rapp, H., Länge, K., & Rapp, B. E. (2011) · Analytical Methods · doi:10.1039/c1ay05253e · Cited by 381
Mail-order microfluidics: evaluation of stereolithography for the production of microfluidic devices
Au, A. K., Lee, W., & Folch, A. (2014) · Lab Chip · doi:10.1039/c3lc51360b · Cited by 380
Xurography: rapid prototyping of microstructures using a cutting plotter
Bartholomeusz, D. A., Boutte, R. W., & Andrade, J. D. (2005) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2005.859087 · Cited by 360
Differential regulation of osteoblasts by substrate microstructural features
Zinger, O., Zhao, G., Schwartz, Z., Simpson, J., Wieland, M., Landolt, D., & Boyan, B. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.06.035 · Cited by 356
Nielsen, A. V., Beauchamp, M. J., Nordin, G. P., & Woolley, A. T. (2020) · Annual Review of Analytical Chemistry · doi:10.1146/annurev-anchem-091619-102649 · Cited by 339
PDMS bonding by means of a portable, low-cost corona system
Haubert, K., Drier, T., & Beebe, D. (2006) · Lab on a Chip · doi:10.1039/b610567j · Cited by 307
Microfluidic Multicompartment Device for Neuroscience Research
Taylor, A. M., Rhee, S. W., Tu, C. H., Cribbs, D. H., Cotman, C. W., & Jeon, N. L. (2003) · Langmuir · doi:10.1021/la026417v · Cited by 295
A microfabricated device for sizing and sorting DNA molecules
Chou, H.-P., Spence, C., Scherer, A., & Quake, S. (1999) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.96.1.11 · Cited by 274
Personalised organs-on-chips: functional testing for precision medicine
van den Berg, A., Mummery, C. L., Passier, R., & van der Meer, A. D. (2019) · Lab on a Chip · doi:10.1039/c8lc00827b · Cited by 270
Recent advances in multi-material additive manufacturing: methods and applications
Han, D., & Lee, H. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.03.004 · Cited by 266
Malek, C. K., & Saile, V. (2004) · Microelectronics Journal · doi:10.1016/j.mejo.2003.10.003 · Cited by 263
Lab-on-a-Foil: microfluidics on thin and flexible films
Focke, M., Kosse, D., Müller, C., Reinecke, H., Zengerle, R., & von Stetten, F. (2010) · Lab on a Chip · doi:10.1039/c001195a · Cited by 255
SU‐8 as a structural material for labs‐on‐chips and microelectromechanical systems
Abgrall, P., Conedera, V., Camon, H., Gue, A., & Nguyen, N. (2007) · ELECTROPHORESIS · doi:10.1002/elps.200700333 · Cited by 242
Replica Molding of High-Aspect-Ratio Polymeric Nanopillar Arrays with High Fidelity
Zhang, Y., Lo, C.-W., Taylor, J. A., & Yang, S. (2006) · Langmuir · doi:10.1021/la061372+ · Cited by 221
Han, D., Yang, C., Fang, N. X., & Lee, H. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.031 · Cited by 216
Flexible Substrate-Based Devices for Point-of-Care Diagnostics
Wang, S., Chinnasamy, T., Lifson, M. A., Inci, F., & Demirci, U. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.05.009 · Cited by 209
Engineering materials with light: recent progress in digital light processing based 3D printing
Zhao, Z., Tian, X., & Song, X. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc03548c · Cited by 206
Rapid prototyping of microfluidic chips in COC
Steigert, J., Haeberle, S., Brenner, T., Müller, C., Steinert, C. P., Koltay, P., Gottschlich, N., Reinecke, H., Rühe, J., Zengerle, R., et al. (2007) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/17/2/020 · Cited by 194
Injection molded microfluidic chips featuring integrated interconnects
Mair, D. A., Geiger, E., Pisano, A. P., Fréchet, J. M. J., & Svec, F. (2006) · Lab Chip · doi:10.1039/b605911b · Cited by 193
Laser processing for bio-microfluidics applications (part I)
Khan Malek, C. G. (2006) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-006-0514-2 · Cited by 190
Enabling Microfluidics: from Clean Rooms to Makerspaces
Walsh, D. I., Kong, D. S., Murthy, S. K., & Carr, P. A. (2017) · Trends in Biotechnology · doi:10.1016/j.tibtech.2017.01.001 · Cited by 181
Some recent advances in multi-material micro- and nano-manufacturing
Brousseau, E., Dimov, S., & Pham, D. T. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2214-5 · Cited by 170
Laser-induced hierarchical carbon patterns on polyimide substrates for flexible urea sensors
Mamleyev, E. R., Heißler, S., Nefedov, A., Weidler, P. G., Nordin, N., Kudryashov, V. V., Länge, K., MacKinnon, N., & Sharma, S. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0047-8 · Cited by 169
3D-printed Quake-style microvalves and micropumps
Lee, Y., Bhattacharjee, N., & Folch, A. (2018) · Lab on a Chip · doi:10.1039/c8lc00001h · Cited by 165
Reyes, D. R., van Heeren, H., Guha, S., Herbertson, L., Tzannis, A. P., Ducrée, J., Bissig, H., & Becker, H. (2021) · Lab on a Chip · doi:10.1039/d0lc00963f · Cited by 162
Decal Transfer Microlithography: A New Soft-Lithographic Patterning Method
Childs, W. R., & Nuzzo, R. G. (2002) · Journal of the American Chemical Society · doi:10.1021/ja020942z · Cited by 155
Laser processing for bio-microfluidics applications (part II)
Malek, C. K. (2006) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-006-0517-z · Cited by 153
Micro-nanostructured polymer surfaces using injection molding: A review
Maghsoudi, K., Jafari, R., Momen, G., & Farzaneh, M. (2017) · Materials Today Communications · doi:10.1016/j.mtcomm.2017.09.013 · Cited by 150
Flexible plastic, paper and textile lab-on-a chip platforms for electrochemical biosensing
Economou, A., Kokkinos, C., & Prodromidis, M. I. (2018) · Lab on a Chip · doi:10.1039/c8lc00025e · Cited by 148
Shaegh, S. A. M., Pourmand, A., Nabavinia, M., Avcı, H., Tamayol, A., Mostafalu, P., Ghavifekr, H. B., Aghdam, E. N., Dokmeci, M. R., Khademhosseini, A., et al. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.07.138 · Cited by 143
Becker, H. (2009) · Lab on a Chip · doi:10.1039/b916505n · Cited by 133
Thermoforming of Film‐Based Biomedical Microdevices
Truckenmüller, R. K., Giselbrecht, S., Rivron, N. C., Gottwald, E., Saile, V., van den Berg, A., Weßling, M., & van Blitterswijk, C. (2011) · Advanced Materials · doi:10.1002/adma.201003538 · Cited by 131
Covalent Microcontact Printing of Proteins for Cell Patterning
Rożkiewicz, D. I., Kraan, Y. M., Werten, M. W. T., de Wolf, F. A., Subramaniam, V., Ravoo, B. J., & Reinhoudt, D. N. (2006) · Chemistry - A European Journal · doi:10.1002/chem.200501554 · Cited by 125
Focke, M., Stumpf, F., Faltin, B., Reith, P., Bamarni, D., Wadle, S., Müller, C., Reinecke, H., Schrenzel, J., François, P., et al. (2010) · Lab on a Chip · doi:10.1039/c004954a · Cited by 124
Roll-to-roll processing of film substrates for hybrid integrated flexible electronics
Palavesam, N., Marin, S., Hemmetzberger, D., Landesberger, C., Bock, K., & Kutter, C. (2018) · Flexible and Printed Electronics · doi:10.1088/2058-8585/aaaa04 · Cited by 107
Flexible Sensors for Chronic Wound Management
Ochoa, M., Rahimi, R., & Ziaie, B. (2014) · IEEE Reviews in Biomedical Engineering · doi:10.1109/rbme.2013.2295817 · Cited by 106
Fabrication of integrated microfluidic devices by direct ink writing (DIW) 3D printing
Ching, T., Li, Y., Karyappa, R. B., Ohno, A., Toh, Y., & Hashimoto, M. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.05.086 · Cited by 105
High aspect ratio meso-scale parts enabled by wire micro-EDM
Benavides, G. L., Bieg, L. F., Saavedra, M. P., & Bryce, E. A. (2002) · Microsystem Technologies · doi:10.1007/s00542-002-0190-x · Cited by 102
Rapid, low cost prototyping of transdermal devices for personal healthcare monitoring
Sharma, S., Saeed, A., Johnson, C., Gadegaard, N., & Cass, A. E. G. (2016) · Sensing and Bio-Sensing Research · doi:10.1016/j.sbsr.2016.10.004 · Cited by 102
Rapid Softlithography Using 3D‐Printed Molds
Bazaz, S. R., Kashaninejad, N., Azadi, S., Patel, K., Asadnia, M., Jin, D., & Warkiani, M. E. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900425 · Cited by 99
Design and Rapid Prototyping of Thin-Film Laminate-Based Microfluidic Devices
Weigl, B. H., Bardell, R. L., Schulte, T., Battrell, F., & Hayenga, J. W. (2001) · Biomedical Microdevices · doi:10.1023/a:1012448412811 · Cited by 97
Mauk, M. G., Song, J., Liu, C., & Bau, H. H. (2018) · Biosensors · doi:10.3390/bios8010017 · Cited by 97
Two-Dimensional Electrophoretic Separation of Proteins Using Poly(methyl methacrylate) Microchips
Shadpour, H., & Soper, S. A. (2006) · Analytical Chemistry · doi:10.1021/ac0600398 · Cited by 95
Key Enabling Technologies for Point-of-Care Diagnostics
Primiceri, E., Chiriacò, M. S., Notarangelo, F. M., Crocamo, A., Ardissino, D., Cereda, M., Bramanti, A. P., Bianchessi, M. A., Giannelli, G., & Maruccio, G. (2018) · Sensors · doi:10.3390/s18113607 · Cited by 93
Accurate and rapid 3D printing of microfluidic devices using wavelength selection on a DLP printer
van der Linden, P., Popov, A. M., & Pontoni, D. (2020) · Lab on a Chip · doi:10.1039/d0lc00767f · Cited by 91
Flexible fluidic microchips based on thermoformed and locally modified thin polymer films
Truckenmüller, R. K., Giselbrecht, S., van Blitterswijk, C., Dambrowsky, N., Gottwald, E., Mappes, T., Rolletschek, A., Saile, V., Trautmann, C., Weibezahn, K. F., et al. (2008) · Lab on a Chip · doi:10.1039/b803619e · Cited by 88
Replication of cicada wing’s nano-patterns by hot embossing and UV nanoimprinting
Hong, S., Hwang, J., & Lee, H. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/38/385303 · Cited by 85
Nguyen, T., Jung, S. H., Lee, M. S., Park, T.-E., Ahn, S.-K., & Kang, J. H. (2019) · Lab on a Chip · doi:10.1039/c9lc00338j · Cited by 77
Ion beam, focused ion beam, and plasma discharge machining
ALLEN, D. M., Shore, P., Evans, R. W., Fanara, C., O’Brien, W., Marson, S., & O’Neill, W. (2009) · CIRP Annals · doi:10.1016/j.cirp.2009.09.007 · Cited by 77
Developing Microfluidic Sensing Devices Using 3D Printing
Rusling, J. F. (2018) · ACS Sensors · doi:10.1021/acssensors.8b00079 · Cited by 76
Rapid prototyping of robust and versatile microfluidic components using adhesive transfer tapes
Nath, P., Fung, D., Kunde, Y. A., Zeytun, A., Branch, B. A., & Goddard, G. (2010) · Lab on a Chip · doi:10.1039/c002457k · Cited by 74
Safe and cost-effective rapid-prototyping of multilayer PMMA microfluidic devices
Liga, A., Morton, J. A. S., & Kersaudy-Kerhoas, M. (2016) · Microfluidics and Nanofluidics · doi:10.1007/s10404-016-1823-1 · Cited by 73
3D printed metal molds for hot embossing plastic microfluidic devices
Lin, T.-Y., Do, T., Kwon, P. Y., & Lillehoj, P. B. (2016) · Lab on a Chip · doi:10.1039/c6lc01430e · Cited by 71
Deterministic Micro Asperities on Bearings and Seals Using a Modified LIGA Process
Stephens, L. S., Siripuram, R., Hayden, M. A., & McCartt, B. M. (2004) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.1619430 · Cited by 70
Roll-to-Roll Manufacturing of Integrated Immunodetection Sensors
Liedert, C., Rannaste, L., Kokkonen, A., Huttunen, O., Liedert, R., Hiltunen, J. A., & Hakalahti, L. (2020) · ACS Sensors · doi:10.1021/acssensors.0c00404 · Cited by 68
Serra, M., Pereiro, I., Yamada, A., Viovy, J., Descroix, S., & Ferraro, D. (2017) · Lab on a Chip · doi:10.1039/c6lc01319h · Cited by 65
Zhang, H., Guzman, A. R., Wippold, J. A., Li, Y., Dai, J. H., Huang, C. Y., & Han, A. (2020) · Lab on a Chip · doi:10.1039/d0lc00757a · Cited by 64
Gonzalez, G. A., Chiappone, A., Dietliker, K., Pirri, C. F., & Roppolo, I. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000374 · Cited by 62
Cell chips as new tools for cell biology – results, perspectives and opportunities
Primiceri, E., Chiriacò, M. S., Rinaldi, R., & Maruccio, G. (2013) · Lab on a Chip · doi:10.1039/c3lc50550b · Cited by 61
Flexible micro manufacturing platform for the fabrication of PMMA microfluidic devices
Trotta, G., Volpe, A., Ancona, A., & Fassi, I. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.07.030 · Cited by 59
Monolithic, 3D-Printed Microfluidic Platform for Recapitulation of Dynamic Tumor Microenvironments
Beckwith, A. L., Borenstein, J. T., & Velásquez–García, L. F. (2018) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2018.2869327 · Cited by 58
Microfabricated silicon gas chromatographic microchannels: fabrication and performance
Matzke, C. M., Kottenstette, R. J., Casalnuovo, S. A., Frye-Mason, G. C., Hudson, M. L., Sasaki, D. Y., Manginell, R. P., & Wong, C.-N. C. (1998) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.324309 · Cited by 52
Microfluidic tools toward industrial biotechnology
Oliveira, A. F., Pessoa, A. C. S. N., Bastos, R. G., & de la Torre, L. G. (2016) · Biotechnology Progress · doi:10.1002/btpr.2350 · Cited by 52
Microfluidic Bioreactors for Cell Culturing: A Review
Pasirayi, G., Auger, V., Scott, S. M., Rahman, P. K. S. M., Islam, M., O’Hare, L., & Ali, Z. (2011) · Micro and Nanosystems · doi:10.2174/1876402911103020137 · Cited by 51
Self-citationLin, H., Zhao, Y., Lin, S., Wang, B., Yeung, C. J., Cheng, X., Wang, Z., Cai, T., Yu, W., King, K., et al. (2019) · Lab on a Chip · doi:10.1039/c9lc00418a · Cited by 50
A novel process for continuous thermal embossing of large‐area nanopatterns onto polymer films
Fagan, M. D., Kim, B. H., & Yao, D. (2009) · Advances in Polymer Technology · doi:10.1002/adv.20167 · Cited by 44
Volpe, A., Vadukkal, U. K. V., Chiriacò, M. S., et al. (2020) · Engineering · doi:10.1016/j.eng.2020.10.012 · Cited by 43
Bonding of thermoplastic microfluidics by using dry adhesive tape
Tsao, C., & Syu, W.-C. (2020) · RSC Advances · doi:10.1039/d0ra05876a · Cited by 35
Low cost microfluidic cell culture array using normally closed valves for cytotoxicity assay
Pasirayi, G., Scott, S. M., Islam, M., O’Hare, L., Bateson, S., & Ali, Z. (2014) · Talanta · doi:10.1016/j.talanta.2014.06.020 · Cited by 31
Self-citationHu, C., Lin, S., Li, W., Sun, H., Chen, Y., Chan, C.-W., Leung, C., Ma, D., Wu, H., & Ren, K. (2016) · Lab on a Chip · doi:10.1039/c6lc00957c · Cited by 29
Gale, B. K., Eddings, M. A., Sundberg, S. O., Hatch, A. C., Kim, J., & Ho, T. (2008) · Elsevier eBooks · doi:10.1016/b978-044452190-3.00011-2 · Cited by 28
Easily fabricated magnetic traps for single-cell applications
Koschwanez, J. H., Carlson, R. H., & Meldrum, D. R. (2007) · Review of Scientific Instruments · doi:10.1063/1.2722400 · Cited by 26
Fabrication of Flexible Binary Amplitude Masks for Patterning on Highly Curved Surfaces
Bowen, A. M., & Nuzzo, R. G. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900978 · Cited by 22
SiO_2-based nonplanar structures fabricated using femtosecond laser lithography
Nishiyama, H., Mizoshiri, M., Kawahara, T., Nishii, J., & Hirata, Y. (2008) · Optics Express · doi:10.1364/oe.16.017288 · Cited by 21
Subpicosecond-pulse laser microstructuring for enhanced reproducibility of biosensors
von Woedtke, T., Abel, P., Krüger, J., & Kautek, W. (1997) · Sensors and Actuators B Chemical · doi:10.1016/s0925-4005(97)80330-9 · Cited by 21
Ultrasonic Vibration Hot Embossing
Liu, S.-J., & Dung, Y.-T. (2005) · International Polymer Processing · doi:10.1515/ipp-2005-0074 · Cited by 20
Large volume nanoscale 3D printing: Nano-3DP
Greer, A. I. M., Barbour, E., Cutiongco, M. F. A., Stormonth-Darling, J., Convery, N., Alsaigh, R. E., Lavery, M. P. J., & Gadegaard, N. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100782 · Cited by 20
Ohlander, A., Zilio, C., Hammerle, T., Zelenin, S. M., Klink, G., Chiari, M., Bock, K., & Russom, A. (2013) · Lab on a Chip · doi:10.1039/c3lc50171j · Cited by 19
Microbioreactor for lower cost and faster optimisation of protein production
Parekh, M., ali, A., Ali, Z., Bateson, S., Abugchem, F., Pybus, L. P., & Lennon, C. (2020) · The Analyst · doi:10.1039/d0an01266a · Cited by 19
Self-citationRapid prototyping of flexible multilayer microfluidic devices using polyester sealing film
Fan, Y., Liu, S., He, J., Gao, K., & Zhang, Y. (2017) · Microsystem Technologies · doi:10.1007/s00542-017-3630-3 · Cited by 14
Rashid, M., Dou, Y., Auger, V., & Ali, Z. (2010) · Micro and Nanosystems · doi:10.2174/1876402911002020108 · Cited by 7
Self-citationYan, S., Zhu, Y., Tang, S., Li, Y., Zhao, Q., Yuan, D., Yun, G., Zhang, J., Zhang, S., & Li, W. (2018) · Electrophoresis · doi:10.1002/elps.201700449 · Cited by 7
Cited by
Microfluidic Devices: A Tool for Nanoparticle Synthesis and Performance Evaluation
Gimondi, S., Ferreira, H., Reis, R. L., & Neves, N. M. (2023) · ACS Nano · doi:10.1021/acsnano.3c01117 · Cited by 376
Ex Vivo Tools and Models in MASLD Research
Velliou, R.-I., Giannousi, E., Ralliou, C., Kassi, E., & Chatzigeorgiou, A. (2024) · Cells · doi:10.3390/cells13221827 · Cited by 15
Metadata
- Authors
- Scott, S., & Ali, Z.
- Venue
- Micromachines
- Publisher
- MDPI AG
- Published
- 2021-03-18
- Volume
- 12
- Issue
- 3
- Pages
- 319
- ISSN
- 2072-666X (ISSN-L)
- OpenAlex
- W3137627959
- Cited by
- 479
- References
- 114
- FWCI
- 19.53
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.