The DOI matches its Crossref record; 98 of the 98 references it cites were found in a registry or an index.
Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting
Open accessAbstract
Recent developments in 3D printing technologies and design have been nothing short of spectacular. Parallel to this, development of bioinks has also emerged as an active research area with almost unlimited possibilities. Many bioinks have been developed for various cells types, but bioinks currently used for 3D printing still have challenges and limitations. Bioink development is significant due to two major objectives. The first objective is to provide growth- and function-supportive bioinks to the cells for their proper organization and eventual function and the second objective is to minimize the effect of printing on cell viability, without compromising the resolution shape and stability of the construct. Here, we will address the current status and challenges of bioinks for 3D printing of tissue constructs for in vitro and in vivo applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials fabrication from Bombyx mori silk fibroin
Rockwood, D. N., Preda, R. C., Yücel, T., Wang, X., Lovett, M. L., & Kaplan, D. L. (2011) · Nature Protocols · doi:10.1038/nprot.2011.379 · Cited by 3,066
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
From 3D cell culture to organs-on-chips
Huh, D., Hamilton, G. A., & Ingber, D. E. (2011) · Trends in Cell Biology · doi:10.1016/j.tcb.2011.09.005 · Cited by 1,834
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Bioactive modification of poly (ethylene glycol) hydrogels for tissue engineering
Zhu, J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.02.044 · Cited by 1,457
Organ printing: computer-aided jet-based 3D tissue engineering
Mironov, V., Boland, T., Trusk, T., Forgacs, G., & Markwald, R. R. (2003) · Trends in Biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,276
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Cited by
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
A definition of bioinks and their distinction from biomaterial inks
Groll, J., Burdick, J. A., Cho, D.-W., Derby, B., Gelinsky, M., Heilshorn, S. C., Jüngst, T., Malda, J., Mironov, V. A., Nakayama, K., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aaec52 · Cited by 797
Bishop, E. S., Mostafa, S., Pakvasa, M., Luu, H. H., Lee, M. J., Wolf, J. M., Ameer, G. A., He, T.-C., & Reid, R. R. (2017) · Genes & Diseases · doi:10.1016/j.gendis.2017.10.002 · Cited by 683
Alginate and alginate composites for biomedical applications
Ahmad Raus, R., Wan Nawawi, W. M. F., & Nasaruddin, R. R. (2021) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2020.10.001 · Cited by 627
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Yu, C., Schimelman, J., Wang, P., Miller, K. L., Ma, X., You, S., Guan, J., Sun, B., Zhu, W., & Chen, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00810 · Cited by 579
Review of alginate-based hydrogel bioprinting for application in tissue engineering
Rastogi, P., & Kandasubramanian, B. (2019) · Biofabrication · doi:10.1088/1758-5090/ab331e · Cited by 564
Processing of collagen based biomaterials and the resulting materials properties
Meyer, M. (2019) · BioMedical Engineering OnLine · doi:10.1186/s12938-019-0647-0 · Cited by 539
3D Bioprinting for Organ Regeneration
Cui, H., Nowicki, M., Fisher, J. P., & Zhang, L. G. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601118 · Cited by 535
Gao, T., Gillispie, G. J., Copus, J. S., PR, A. K., Seol, Y.-J., Atala, A., Yoo, J. J., & Lee, S. J. (2018) · Biofabrication · doi:10.1088/1758-5090/aacdc7 · Cited by 510
Recent Advances in Bioink Design for 3D Bioprinting of Tissues and Organs
Ji, S., & Guvendiren, M. (2017) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2017.00023 · Cited by 490
From Shape to Function: The Next Step in Bioprinting
Levato, R., Jungst, T., Scheuring, R. G., Blunk, T., Groll, J., & Malda, J. (2020) · Advanced Materials · doi:10.1002/adma.201906423 · Cited by 476
3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 437
Bioprinting for vascular and vascularized tissue biofabrication
Datta, P., Ayan, B., & Ozbolat, I. T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.035 · Cited by 431
Assessment methodologies for extrusion-based bioink printability
Gillispie, G., Prim, P., Copus, J., Fisher, J., Mikos, A. G., Yoo, J. J., Atala, A., & Lee, S. J. (2020) · Biofabrication · doi:10.1088/1758-5090/ab6f0d · Cited by 426
Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel‐Based Bioinks
Cui, X., Li, J., Hartanto, Y., Durham, M., Tang, J., Zhang, H., Hooper, G., Lim, K., & Woodfield, T. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901648 · Cited by 383
Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting
Wilson, S. A., Cross, L. M., Peak, C. W., & Gaharwar, A. K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13602 · Cited by 369
Decellularized matrices in regenerative medicine
Taylor, D. A., Sampaio, L. C., Ferdous, Z., Gobin, A. S., & Taite, L. J. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.04.044 · Cited by 337
Boularaoui, S., Al Hussein, G., Khan, K. A., Christoforou, N., & Stefanini, C. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00093 · Cited by 320
Choi, Y.-J., Jun, Y.-J., Kim, D. Y., Yi, H.-G., Chae, S.-H., Kang, J., Lee, J., Gao, G., Kong, J.-S., Jang, J., et al. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.03.036 · Cited by 314
Design and Printing Strategies in 3D Bioprinting of Cell‐Hydrogels: A Review
Lee, J. M., & Yeong, W. Y. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600435 · Cited by 310
Extracellular matrix hydrogel therapies: In vivo applications and development
Spang, M. T., & Christman, K. L. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.019 · Cited by 304
Scanningless and continuous 3D bioprinting of human tissues with decellularized extracellular matrix
Yu, C., Ma, X., Zhu, W., Wang, P., Miller, K. L., Stupin, J., Koroleva-Maharajh, A., Hairabedian, A., & Chen, S. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.12.009 · Cited by 272
3D neural tissue models: From spheroids to bioprinting
Zhuang, P., Sun, A. X., An, J., Chua, C. K., & Chew, S. Y. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.10.002 · Cited by 270
Tissue engineering by decellularization and 3D bioprinting
Garreta, E., Oria, R., Tarantino, C., Pla-Roca, M., Prado, P., Fernández-Avilés, F., Campistol, J. M., Samitier, J., & Montserrat, N. (2017) · Materials Today · doi:10.1016/j.mattod.2016.12.005 · Cited by 263
Polymeric Systems for Bioprinting
Bedell, M. L., Navara, A. M., Du, Y., Zhang, S., & Mikos, A. G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00834 · Cited by 258
Physical and Chemical Factors Influencing the Printability of Hydrogel-based Extrusion Bioinks
Lee, S. C., Gillispie, G., Prim, P., & Lee, S. J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00015 · Cited by 255
Advancing bioinks for 3D bioprinting using reactive fillers: a review
Heid, S., & Boccaccini, A. R. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.06.040 · Cited by 224
Natural Polymers for Organ 3D Bioprinting
Liu, F., Chen, Q., Liu, C., Ao, Q., Tian, X., Fan, J., Tong, H., & Wang, X. (2018) · Polymers · doi:10.3390/polym10111278 · Cited by 170
Stepanovska, J., Supova, M., Hanzalek, K., Broz, A., & Matejka, R. (2021) · Biomedicines · doi:10.3390/biomedicines9091137 · Cited by 112
Choi, G., & Cha, H. J. (2019) · Biomaterials Research · doi:10.1186/s40824-019-0168-8 · Cited by 80
Portable hand-held bioprinters promote in situ tissue regeneration
Pazhouhnia, Z., Beheshtizadeh, N., Namini, M. S., & Lotfibakhshaiesh, N. (2022) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10307 · Cited by 60
Basement membrane properties and their recapitulation in organ-on-chip applications
Salimbeigi, G., Vrana, N. E., Ghaemmaghami, A. M., Huri, P. Y., & McGuinness, G. B. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2022.100301 · Cited by 57
Silk based bio-inks for medical applications
Anant Deshpande, V., Antanitta. S, V., Kore, A., & Kandasubramanian, B. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112255 · Cited by 23
3D printing a biocompatible elastomer for modeling muscle regeneration after volumetric muscle loss
Kiratitanaporn, W., Berry, D. B., Mudla, A., Fried, T., Lao, A., Yu, C., Hao, N., Ward, S. R., & Chen, S. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.213171 · Cited by 20
Metadata
- Authors
- Panwar, A., & Tan, L.
- Venue
- Molecules
- Publisher
- MDPI AG
- Published
- 2016-05-25
- Volume
- 21
- Issue
- 6
- Pages
- 685
- ISSN
- 1420-3049 (ISSN-L)
- OpenAlex
- W2394524191
- Cited by
- 472
- References
- 98
- FWCI
- 16.87
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.