The DOI matches its Crossref record; 165 of the 165 references it cites were found in a registry or an index.
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Abstract
In nature, cellular materials exhibit enhanced multifunctionalities driven mainly by their sophisticated topologies and length scales. These natural systems have inspired the development and expansion of synthetic architected materials for revolutionary applications. Consequently, both the design and synthesis techniques gained considerable attention and have massively progressed over the last few decades. Such materials with topology‐controlled properties are commonly known as “metamaterials.” Architected materials with topologies based on triply periodic minimal surfaces (TPMS) which are of particular interest have attracted much attention recently due to their mathematically controlled fascinating topologies and their exhibited physical and mechanical properties. Herein, the design, synthesis, and use of TPMS in the field of metamaterials and metacomposites for several applications are focused upon. The design process to create TPMS‐based 3D lattices is summarized and the different manufacturing processes used to fabricate these lattices are highlighted. Herein, the material–topology–mechanical properties relationship of different TPMS‐based lattices that are investigated in the literature is discussed. A further objective is to highlight the applications where TPMS‐based lattices or composites can be efficiently used as well as the research areas to be explored.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Generating optimal topologies in structural design using a homogenization method
Bendsøe, M. P., & Kikuchi, N. (1988) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(88)90086-2 · Cited by 7,467
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials
Arruda, E. M., & Boyce, M. C. (1993) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(93)90013-6 · Cited by 3,239
A level set method for structural topology optimization
Wang, M. Y., Wang, X., & Guo, D. (2003) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(02)00559-5 · Cited by 3,232
Ashby, M. F., Evans, A., Fleck, N. A., Gibson, L. J., Hutchinson, J. W., & Wadley, H. N. G. (2002) · Materials & Design · doi:10.1016/s0261-3069(01)00049-8 · Cited by 2,367
Brakke, K. A. (1992) · Experimental Mathematics · doi:10.1080/10586458.1992.10504253 · Cited by 2,340
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Unifying Weak- and Strong-Segregation Block Copolymer Theories
Matsen, M. W., & Bates, F. S. (1996) · Macromolecules · doi:10.1021/ma951138i · Cited by 1,839
The COC algorithm, Part II: Topological, geometrical and generalized shape optimization
Zhou, M., & Rozvany, G. I. N. (1991) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(91)90046-9 · Cited by 1,827
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
The properties of foams and lattices
Ashby, M. F. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1678 · Cited by 1,771
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Bendsøe, M. P., & Sigmund, O. (2004) · Springer eBooks · doi:10.1007/978-3-662-05086-6 · Cited by 1,727
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Strong, lightweight, and recoverable three-dimensional ceramic nanolattices
Meza, L. R., Das, S., & Greer, J. R. (2014) · Science · doi:10.1126/science.1255908 · Cited by 1,498
The topological design of multifunctional cellular metals
Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., & Wadley, H. N. G. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00016-5 · Cited by 1,134
Generalized shape optimization without homogenization
Rozvany, G. I. N., Zhou, M., & Birker, T. (1992) · Structural Optimization · doi:10.1007/bf01742754 · Cited by 1,126
A critical review of established methods of structural topology optimization
Rozvany, G. I. N. (2009) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-007-0217-0 · Cited by 1,078
Three-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodes
Zhang, H., Yu, X., & Braun, P. V. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.38 · Cited by 1,072
L. On the calculation of the equilibrium and stiffness of frames
Maxwell, J. C. (1864) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786446408643668 · Cited by 1,028
Level-set methods for structural topology optimization: a review
van Dijk, N. P., Maute, K., Langelaar, M., & van Keulen, F. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0912-y · Cited by 1,008
Mechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
Al-Ketan, O., Rowshan, R., & Abu Al-Rub, R. K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.006 · Cited by 941
Self-citationMechanical metamaterials at the theoretical limit of isotropic elastic stiffness
Berger, J. B., Wadley, H. N. G., & McMeeking, R. M. (2017) · Nature · doi:10.1038/nature21075 · Cited by 914
Bobbert, F. S. L., Lietaert, K., Eftekhari, A. A., Pouran, B., Ahmadi, S. M., Weinans, H., & Zadpoor, A. A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.024 · Cited by 873
Multiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
Gesammelte Mathematische Abhandlungen: Erster Band
Schwarz, H. A. (1890) · Springer eBooks · doi:10.1007/978-3-642-50665-9 · Cited by 827
In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
Leung, C. L. A., Marussi, S., Atwood, R. C., Towrie, M., Withers, P. J., & Lee, P. D. (2018) · Nature Communications · doi:10.1038/s41467-018-03734-7 · Cited by 817
Zhang, L., Feih, S., Daynes, S., Chang, S., Wang, M. Y., Wei, J., & Lu, W. F. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.08.007 · Cited by 780
Evaluations of cellular lattice structures manufactured using selective laser melting
Yan, C., Hao, L., Hussein, A., & Raymont, D. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.06.002 · Cited by 730
Maskery, I., Sturm, L., Aremu, A. O., Panesar, A., Williams, C. B., Tuck, C. J., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2018) · Polymer · doi:10.1016/j.polymer.2017.11.049 · Cited by 728
Yan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
Resilient 3D hierarchical architected metamaterials
Meza, L. R., Zelhofer, A. J., Clarke, N., Mateos, A. J., Kochmann, D. M., & Greer, J. R. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509120112 · Cited by 706
3D Bioprinting for Tissue and Organ Fabrication
Zhang, Y. S., Yue, K., Aleman, J., Mollazadeh-Moghaddam, K., Bakht, S. M., Yang, J., Jia, W., Dell’Erba, V., Assawes, P., Shin, S. R., et al. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1612-8 · Cited by 682
Murr, L. E., Gaytan, S. M., Medina, F., Lopez, H., Martinez, E., Machado, B. I., Hernandez, D. H., Martinez, L., Lopez, M. I., Wicker, R. B., et al. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0010 · Cited by 636
Han, L., & Che, S. (2018) · Advanced Materials · doi:10.1002/adma.201705708 · Cited by 624
Yan, C., Hao, L., Hussein, A., Young, P., & Raymont, D. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.10.027 · Cited by 622
Yuan, L., Ding, S., & Wen, C. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.12.003 · Cited by 593
Nanolattices: An Emerging Class of Mechanical Metamaterials
Bauer, J., Meza, L. R., Schaedler, T. A., Schwaiger, R., Zheng, X., & Valdevit, L. (2017) · Advanced Materials · doi:10.1002/adma.201701850 · Cited by 592
Minimal surface scaffold designs for tissue engineering
Kapfer, S. C., Hyde, S. T., Mecke, K., Arns, C. H., & Schröder-Turk, G. E. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.012 · Cited by 579
Arabnejad, S., Burnett Johnston, R., Pura, J. A., Singh, B., Tanzer, M., & Pasini, D. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.10.048 · Cited by 578
Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., & Ashcroft, I. A. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.04.003 · Cited by 575
Mathematically defined tissue engineering scaffold architectures prepared by stereolithography
Melchels, F. P. W., Bertoldi, K., Gabbrielli, R., Velders, A. H., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.068 · Cited by 530
Orilall, M. C., & Wiesner, U. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00034e · Cited by 520
Tan, X. P., Tan, Y. J., Chow, C. S. L., Tor, S. B., & Yeong, W. Y. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.02.094 · Cited by 514
Tancogne‐Dejean, T., Diamantopoulou, M., Gorji, M. B., Bonatti, C., & Mohr, D. (2018) · Advanced Materials · doi:10.1002/adma.201803334 · Cited by 506
Abueidda, D. W., Elhebeary, M., Shiang, C.-S. (., Pang, S., Abu Al-Rub, R. K., & Jasiuk, I. M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107597 · Cited by 491
Self-citationA Bicontinuous Double Gyroid Hybrid Solar Cell
Crossland, E. J. W., Kamperman, M., Nedelcu, M., Ducati, C., Wiesner, U., Smilgies, D. M., Toombes, G. E. S., Hillmyer, M. A., Ludwigs, S., Steiner, U., et al. (2009) · Nano Letters · doi:10.1021/nl803174p · Cited by 490
Panesar, A., Abdi, M., Hickman, D., & Ashcroft, I. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.008 · Cited by 489
Snapping Mechanical Metamaterials under Tension
Rafsanjani, A., Akbarzadeh, A., & Pasini, D. (2015) · Advanced Materials · doi:10.1002/adma.201502809 · Cited by 459
Abueidda, D. W., Bakir, M., Abu Al-Rub, R. K., Bergström, J. S., Sobh, N. A., & Jasiuk, I. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.018 · Cited by 455
Self-citationAdvanced lattice support structures for metal additive manufacturing
Hussein, A., Hao, L., Yan, C., Everson, R., & Young, P. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.01.020 · Cited by 454
The mechanics and design of a lightweight three-dimensional graphene assembly
Qin, Z., Jung, G. S., Kang, M. J., & Buehler, M. J. (2017) · Science Advances · doi:10.1126/sciadv.1601536 · Cited by 453
Van Bael, S., Kerckhofs, G., Moesen, M., Pyka, G., Schrooten, J., & Kruth, J. P. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.06.045 · Cited by 452
Multistable Shape‐Reconfigurable Architected Materials
Haghpanah, B., Salari‐Sharif, L., Pourrajab, P., Hopkins, J., & Valdevit, L. (2016) · Advanced Materials · doi:10.1002/adma.201601650 · Cited by 452
Current trends in the design of scaffolds for computer-aided tissue engineering
Giannitelli, S. M., Accoto, D., Trombetta, M., & Rainer, A. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.024 · Cited by 451
Maskery, I., Aremu, A. O., Parry, L., Wildman, R. D., Tuck, C. J., & Ashcroft, I. A. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.058 · Cited by 441
Gyroid cuticular structures in butterfly wing scales: biological photonic crystals
Michielsen, K., & Stavenga, D. G. (2008) · Journal of The Royal Society Interface · doi:10.1098/rsif.2007.1065 · Cited by 424
Mechanical response of Ti–6Al–4V octet-truss lattice structures
Dong, L., Deshpande, V. S., & Wadley, H. N. G. (2015) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2015.02.020 · Cited by 408
Yang, L., Mertens, R., Ferrucci, M., Yan, C., Shi, Y., & Yang, S. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.12.007 · Cited by 400
Liu, F., Mao, Z., Zhang, P., Zhang, D. Z., Jiang, J., & Ma, Z. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.053 · Cited by 395
RAJAGOPALAN, S., & ROBB, R. (2006) · Medical Image Analysis · doi:10.1016/j.media.2006.06.001 · Cited by 392
Ataee, A., Li, Y., Brandt, M., & Wen, C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.005 · Cited by 383
Kadkhodapour, J., Montazerian, H., Darabi, A., Anaraki, A. P., Ahmadi, S. M., ZADPOOR, A. A., & Schmauder, S. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.06.012 · Cited by 376
Yan, C., Hao, L., Hussein, A., Bubb, S. L., Young, P., & Raymont, D. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.12.004 · Cited by 362
Rational design of reconfigurable prismatic architected materials
Overvelde, J. T. B., Weaver, J. C., Hoberman, C., & Bertoldi, K. (2017) · Nature · doi:10.1038/nature20824 · Cited by 362
Additive Manufacturing Technologies – Rapid Prototyping to Direct Digital Manufacturing
Mueller, B. (2012) · Assembly Automation · doi:10.1108/aa.2012.03332baa.010 · Cited by 359
3D-printed microfluidic devices
Amin, R., Knowlton, S., Hart, A., Yenilmez, B., Ghaderinezhad, F., Katebifar, S., Messina, M., Khademhosseini, A., & Tasoglu, S. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/022001 · Cited by 349
Miniature chiral beamsplitter based on gyroid photonic crystals
Turner, M. D., Saba, M., Zhang, Q., Cumming, B. P., Schröder-Turk, G. E., & Gu, M. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.233 · Cited by 342
Zekoll, S., Marriner-Edwards, C., Hekselman, A. K. O., Kasemchainan, J., Kuss, C., Armstrong, D. E. J., Cai, D., Wallace, R. J., Richter, F. H., Thijssen, J. H. J., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02723k · Cited by 338
Bonatti, C., & Mohr, D. (2019) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.08.022 · Cited by 330
Yan, C., Hao, L., Hussein, A., Young, P., Huang, J., & Zhu, W. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.01.063 · Cited by 329
A New Type of Low Density Material: Shellular
Han, S. C., Lee, J. W., & Kang, K. (2015) · Advanced Materials · doi:10.1002/adma.201501546 · Cited by 328
Bonatti, C., & Mohr, D. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.10.034 · Cited by 318
Effective conductivities and elastic moduli of novel foams with triply periodic minimal surfaces
Abueidda, D. W., Abu Al-Rub, R. K., Dalaq, A. S., Lee, D.-W., Khan, K. A., & Jasiuk, I. (2016) · Mechanics of Materials · doi:10.1016/j.mechmat.2016.01.004 · Cited by 317
Self-citationLanthanum-catalysed synthesis of microporous 3D graphene-like carbons in a zeolite template
Kim, K., Lee, T., Kwon, Y., Seo, Y., Song, J., Park, J. K., Lee, H., Park, J. Y., Ihee, H., Cho, S. J., et al. (2016) · Nature · doi:10.1038/nature18284 · Cited by 317
Mazur, M., Leary, M., Sun, S., Vcelka, M., Shidid, D., & Brandt, M. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7655-4 · Cited by 314
Zhang, B., Pei, X., Zhou, C., Fan, Y., Jiang, Q., Ronca, A., D'Amora, U., Chen, Y., Li, H., Sun, Y., et al. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.04.065 · Cited by 305
Li, D., Liao, W., Dai, N., Dong, G., Tang, Y., & Xie, Y. M. (2018) · Computer-Aided Design · doi:10.1016/j.cad.2018.06.003 · Cited by 303
Porous scaffold design using the distance field and triply periodic minimal surface models
Yoo, D. J. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.07.019 · Cited by 298
Afshar, M., Anaraki, A. P., Montazerian, H., & Kadkhodapour, J. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.05.027 · Cited by 289
Montazerian, H., Davoodi, E., Asadi-Eydivand, M., Kadkhodapour, J., & Solati-Hashjin, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.009 · Cited by 286
Bonatti, C., & Mohr, D. (2017) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.02.003 · Cited by 275
Speirs, M., Van Hooreweder, B., Van Humbeeck, J., & Kruth, J.-P. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.01.016 · Cited by 267
Murr, L. E., Gaytan, S. M., Medina, F., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., & Wicker, R. B. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.11.015 · Cited by 258
Zhao, M., Liu, F., Fu, G., Zhang, D. Z., Zhang, T., & Zhou, H. (2018) · Materials · doi:10.3390/ma11122411 · Cited by 257
Cost-effective printing of 3D objects with skin-frame structures
Wang, W., Wang, T. Y., Yang, Z., et al. (2013) · ACM Transactions on Graphics · doi:10.1145/2508363.2508382 · Cited by 252
Yánez, A., Cuadrado, A., Martel, O., Afonso, H., & Monopoli, D. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.050 · Cited by 252
Vijayavenkataraman, S., Zhang, L., Zhang, S., Hsi Fuh, J. Y., & Lu, W. F. (2018) · ACS Applied Bio Materials · doi:10.1021/acsabm.8b00052 · Cited by 252
Microarchitected Stretching‐Dominated Mechanical Metamaterials with Minimal Surface Topologies
Al‐Ketan, O., Rezgui, R., Rowshan, R., Du, H., Fang, N. X., & Abu Al‐Rub, R. K. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800029 · Cited by 249
Self-citationAdditive Manufacturing as a Method to Design and Optimize Bioinspired Structures
Velasco‐Hogan, A., Xu, J., & Meyers, M. A. (2018) · Advanced Materials · doi:10.1002/adma.201800940 · Cited by 247
Thomas, N., Sreedhar, N., Al-Ketan, O., Rowshan, R., Abu Al-Rub, R. K., & Arafat, H. (2018) · Desalination · doi:10.1016/j.desal.2018.06.009 · Cited by 223
Self-citationOn design of multi-functional microstructural materials
Cadman, J. E., Zhou, S., Chen, Y., & Li, Q. (2013) · Journal of Materials Science · doi:10.1007/s10853-012-6643-4 · Cited by 215
Al-Ketan, O., Adel Assad, M., & Abu Al-Rub, R. K. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.05.026 · Cited by 200
Self-citationFluid permeabilities of triply periodic minimal surfaces
Jung, Y., & Torquato, S. (2005) · Physical Review E · doi:10.1103/physreve.72.056319 · Cited by 198
Blanquer, S. B. G., Werner, M., Hannula, M., Sharifi, S., Lajoinie, G. P. R., Eglin, D., Hyttinen, J., Poot, A. A., & Grijpma, D. W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6553 · Cited by 195
Additive manufacturing of complex micro-architected graphene aerogels
Hensleigh, R. M., Cui, H., Oakdale, J. S., Ye, J. C., Campbell, P. G., Duoss, E. B., Spadaccini, C. M., Zheng, X., & Worsley, M. A. (2018) · Materials Horizons · doi:10.1039/c8mh00668g · Cited by 192
Self-supporting rhombic infill structures for additive manufacturing
Wu, J., Wang, C. C. L., Zhang, X., et al. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.07.006 · Cited by 189
Porous scaffold design by solid T-splines and triply periodic minimal surfaces
Feng, J., Fu, J., Shang, C., Lin, Z., & Li, B. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.03.007 · Cited by 184
Mechanical Properties of a New Type of Architected Interpenetrating Phase Composite Materials
Al‐Ketan, O., Al‐Rub, R. K. A., & Rowshan, R. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201600235 · Cited by 183
Self-citationWerner, J. G., Rodríguez-Calero, G. G., Abruña, H. D., & Wiesner, U. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03571c · Cited by 181
Sreedhar, N., Thomas, N., Al-Ketan, O., Rowshan, R., Hernandez, H., Abu Al-Rub, R. K., & Arafat, H. A. (2018) · Desalination · doi:10.1016/j.desal.2017.10.010 · Cited by 175
Self-citationStiffness and strength of tridimensional periodic lattices
Vigliotti, A., & Pasini, D. (2012) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2012.03.018 · Cited by 173
Micro‐scale Truss Structures formed from Self‐Propagating Photopolymer Waveguides
Jacobsen, A. J., Barvosa‐Carter, W., & Nutt, S. (2007) · Advanced Materials · doi:10.1002/adma.200700797 · Cited by 172
Effects of cell size and cell wall thickness variations on the stiffness of closed-cell foams
Chen, Y., Das, R. K., & Battley, M. (2014) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2014.09.022 · Cited by 166
Minimal surfaces and multifunctionality
Torquato, S., & Donev, A. (2004) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2003.1269 · Cited by 164
Structurally Efficient Three-dimensional Metamaterials with Controllable Thermal Expansion
Xu, H., & Pasini, D. (2016) · Scientific Reports · doi:10.1038/srep34924 · Cited by 153
3D-printed biodegradable gyroid scaffolds for tissue engineering applications
Germain, L., Rojas, C. F., Vuure, A. W. V., Rieux, A. D., & Dupont-Gillain, C. C. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.04.037 · Cited by 152
Multiscale Geometric Design Principles Applied to 3D Printed Schwarzites
Sajadi, S. M., Owuor, P. S., Schara, S., Woellner, C. F., Rodrigues, V., Vajtai, R., Lou, J., Galvao, D. S., Tiwary, C. S., & Ajayan, P. M. (2017) · Advanced Materials · doi:10.1002/adma.201704820 · Cited by 144
Al‐Ketan, O., Pelanconi, M., Ortona, A., & Al‐Rub, R. K. A. (2019) · Journal of the American Ceramic Society · doi:10.1111/jace.16474 · Cited by 142
Self-citationCheng, L., Liu, J., Liang, X. Y., & To, A. C. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.12.024 · Cited by 141
Afshar, M., Anaraki, A. P., & Montazerian, H. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.06.051 · Cited by 140
Al‐Ketan, O., Al‐Rub, R. K. A., & Rowshan, R. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.1 · Cited by 138
Self-citationDalaq, A. S., Abueidda, D., Al‐Rub, R. K. A., & Jasiuk, I. (2016) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2016.01.011 · Cited by 136
Al‐Ketan, O., Soliman, A., AlQubaisi, A. M., & Al‐Rub, R. K. A. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700549 · Cited by 136
Self-citationYoo, D.-J., & Kim, K.-H. (2015) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-015-0263-2 · Cited by 131
Investigation on the orientation dependence of elastic response in Gyroid cellular structures
Yang, L., Yan, C., Fan, H., Li, Z., Cai, C., Chen, P., Shi, Y., & Yang, S. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.09.042 · Cited by 125
New paradigms in hierarchical porous scaffold design for tissue engineering
Yoo, D.-J. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.12.092 · Cited by 124
Minimal surface designs for porous materials: from microstructures to mechanical properties
Zheng, X., Fu, Z., Du, K., Wang, C., & Yi, Y. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2285-5 · Cited by 124
Surface curvatures of trabecular bone microarchitecture
Jinnai, H., Watashiba, H., Kajihara, T., Nishikawa, Y., Takahashi, M., & Ito, M. (2002) · Bone · doi:10.1016/s8756-3282(01)00672-x · Cited by 118
Effects of nodal fillets and external boundaries on compressive response of an octet truss
Latture, R. M., Rodriguez, R. X., Holmes, L. R., & Zok, F. W. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.12.060 · Cited by 107
Felfel, R. M., Poocza, L., Gimeno-Fabra, M., Milde, T., Hildebrand, G., Ahmed, I., Scotchford, C., Sottile, V., Grant, D. M., & Liefeith, K. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/1/015011 · Cited by 106
Nanoporous Cathodes for High-Energy Li–S Batteries from Gyroid Block Copolymer Templates
Choudhury, S., Agrawal, M., Formánek, P., Jehnichen, D., Fischer, D., Krause, B., Albrecht, V., Stamm, M., & Ionov, L. (2015) · ACS Nano · doi:10.1021/acsnano.5b01406 · Cited by 98
Abueidda, D., Dalaq, A. S., Al‐Rub, R. K. A., & Younes, H. A. (2014) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2014.12.004 · Cited by 98
Elliott, O., Gray, S., McClay, M., Nassief, B., Nunnelley, A., Vogt, E., Ekong, J., Kardel, K., Khoshkhoo, A., Proano-Pena, G., et al. (2017) · Journal of Contemporary Water Research & Education · doi:10.1111/j.1936-704x.2017.03246.x · Cited by 97
3D printed spacers based on TPMS architectures for scaling control in membrane distillation
Thomas, N., Sreedhar, N., Al‐Ketan, O., et al. (2019) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.03.039 · Cited by 97
Self-citation3D Texture Mapping for Rapid Manufacturing
Chen, Y. (2007) · Computer-Aided Design and Applications · doi:10.1080/16864360.2007.10738509 · Cited by 93
Profiting from nature: macroporous copper with superior mechanical properties
Lai, M., Kulak, A. N., Law, D., Zhang, Z., Meldrum, F. C., & Riley, D. J. (2007) · Chemical Communications · doi:10.1039/b707469g · Cited by 92
Mechanical analyses of “Shellular”, an ultralow-density material
Lee, M. G., Lee, J. W., Han, S. C., & Kang, K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.10.040 · Cited by 92
Multiscale Mechanics of Triply Periodic Minimal Surfaces of Three-Dimensional Graphene Foams
Jung, G. S., & Buehler, M. J. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b01431 · Cited by 89
Al‐Ketan, O., Rowshan, R., Palazotto, A. N., & Al‐Rub, R. K. A. (2018) · Journal of Engineering Materials and Technology · doi:10.1115/1.4041874 · Cited by 88
Self-citationAbou-Ali, A. M., Al‐Ketan, O., Rowshan, R., & Al‐Rub, R. K. A. (2019) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-019-03982-8 · Cited by 88
Self-citationSreedhar, N., Thomas, N., Al‐Ketan, O., Rowshan, R., Hernández, H. H., Al‐Rub, R. K. A., & Arafat, H. A. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.05.028 · Cited by 86
Self-citationMechanical properties of copper octet-truss nanolattices
He, Z., Wang, F., Zhu, Y., Wu, H., & Park, H. S. (2017) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2017.01.019 · Cited by 81
Two-photon polymerization of biocompatible photopolymers for microstructured 3D biointerfaces
Weiß, T., Schade, R., Laube, T., Berg, A., Hildebrand, G., Wyrwa, R., Schnabelrauch, M., & Liefeith, K. (2011) · Advanced Engineering Materials · doi:10.1002/adem.201080090 · Cited by 80
Restrepo, S., Ocampo, S., Ramirez, J. A., Paucar, C. G., & Garcı́a, C. (2017) · Journal of Physics Conference Series · doi:10.1088/1742-6596/935/1/012036 · Cited by 80
Sharifi, S., Blanquer, S., van Kooten, T. G., & Grijpma, D. W. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.09.014 · Cited by 77
Yoo, D.-J. (2014) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-014-0583-7 · Cited by 73
Architected Materials with Ultra‐Low Porosity for Vibration Control
Javid, F., Wang, P., Shanian, A., & Bertoldi, K. (2016) · Advanced Materials · doi:10.1002/adma.201600052 · Cited by 73
Three-Dimensional Single Gyroid Photonic Crystals with a Mid-Infrared Bandgap
Peng, S., Zhang, R., Hall-Chen, V. H., Khabiboulline, E. T., Braun, P. V., & Atwater, H. A. (2016) · ACS Photonics · doi:10.1021/acsphotonics.6b00293 · Cited by 67
Exact computation of the triply periodic D (`diamond') minimal surface
Gandy, P. J. F., Cvijović, D., Mackay, A. L., et al. (1999) · Chemical Physics Letters · doi:10.1016/s0009-2614(99)01000-3 · Cited by 66
Walker, J. M., Bodamer, E., Kleinfehn, A. P., Luo, Y., Becker, M. L., & Dean, D. (2017) · Progress in Additive Manufacturing · doi:10.1007/s40964-017-0021-3 · Cited by 64
A Microscopic Shell Structure with Schwarz’s D-Surface
Han, S. C., Choi, J. M., Liu, G., & Kang, K. (2017) · Scientific Reports · doi:10.1038/s41598-017-13618-3 · Cited by 63
Time dependent response of architectured Neovius foams
Khan, K. A., & Al‐Rub, R. K. A. (2017) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2017.03.017 · Cited by 57
Unusually low and density-insensitive thermal conductivity of three-dimensional gyroid graphene
Jung, G. S., Yeo, J., Tian, Z., Zhao Qin, A., & Buehler, M. J. (2017) · Nanoscale · doi:10.1039/c7nr04455k · Cited by 54
Engineering Gyroid‐Structured Functional Materials via Templates Discovered in Nature and in the Lab
Wu, L., Zhang, W., & Zhang, D. (2015) · Small · doi:10.1002/smll.201500812 · Cited by 52
Optimal design of “Shellular”, a micro-architectured material with ultralow density
Nguyen, B. D., Cho, J. S., & Kang, K. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.126 · Cited by 51
Gyroid Optical Metamaterials: Calculating the Effective Permittivity of Multidomain Samples
Dolan, J. A., Saba, M., Dehmel, R., Gunkel, I., Gu, Y., Wiesner, U. B., Hess, O. G., Wilkinson, T. D., Baumberg, J. J., Steiner, U., et al. (2016) · ACS Photonics · doi:10.1021/acsphotonics.6b00400 · Cited by 50
Lei, J., & Liu, Z. (2018) · Carbon · doi:10.1016/j.carbon.2018.01.061 · Cited by 48
New paradigms in cellular material design and fabrication
Yoo, D.-J. (2015) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-015-0330-8 · Cited by 45
Cheng, C., Chen, Y.-M., Zou, F. Y., Yang, K.-C., Lin, T., Liu, K., Lai, C., Ho, R., & Zhu, Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta04077j · Cited by 41
Lian, J., Jang, D., Valdevit, L., Schaedler, T. A., Jacobsen, A. J., Carter, W. B., & Greer, J. R. (2011) · Nano Letters · doi:10.1021/nl202475p · Cited by 34
Wang, C., Feng, L., & Jasiuk, I. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.4000192 · Cited by 30
Viscoelastic properties of architected foams based on the Schoen IWP triply periodic minimal surface
Khan, K. A., & Al‐Rub, R. K. A. (2018) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2018.1538470 · Cited by 28
Poocza, L., Gottschaldt, M., Markweg, E., Hauptmann, N., Hildebrand, G., Pretzel, D., Hartlieb, M., Reichardt, C. L., Kübel, J., Schubert, U. S., et al. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201600686 · Cited by 27
Design and fabrication of a non-clogging scaffold composed of semi-permeable membrane
Tan, S., Gu, J., Han, S. C., Lee, D., & Kang, K. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.033 · Cited by 27
Wu, L., Wang, W., Zhang, W., et al. (2018) · Advanced Optical Materials · doi:10.1002/adom.201800064 · Cited by 21
Ma, W., Huang, W.-S., Ku, C., & Ho, R. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc02731d · Cited by 15
Development of a flow evolution network model for the stress-strain behavior of poly(L-lactide)
Dreher, M. L., Nagaraja, S., Bergstrom, J., & Hayman, D. (2017) · Journal of Biomechanical Engineering · doi:10.1115/1.4037071 · Cited by 12
Poly(HDDA)-Based Polymers for Microfabrication and Mechanobiology
Espinosa-Hoyos, D., Du, H., Fang, N. X., & Vliet, K. J. V. (2017) · MRS Advances · doi:10.1557/adv.2017.57 · Cited by 11
Cited by
Feng, J., Fu, J., Yao, X., & He, Y. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac5be6 · Cited by 813
Design and Optimization of Lattice Structures: A Review
Pan, C., Han, Y., & Lu, J. (2020) · Applied Sciences · doi:10.3390/app10186374 · Cited by 640
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
Metadata
- Authors
- Al-Ketan, O., & Abu Al-Rub, R. K.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2019-08-20
- Volume
- 21
- Issue
- 10
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2961886349
- Cited by
- 887
- References
- 165
- FWCI
- 28.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.