The DOI matches its Crossref record; 113 of the 113 references it cites were found in a registry or an index.
Additive Manufacturing of Batteries
Abstract
Additive manufacturing, i.e., 3D printing, is being increasingly utilized to fabricate a variety of complex‐shaped electronics and energy devices (e.g., batteries, supercapacitors, and solar cells) due to its excellent process flexibility, good geometry controllability, as well as cost and material waste reduction. In this review, the recent advances in 3D printing of emerging batteries are emphasized and discussed. The recent progress in fabricating 3D‐printed batteries through the major 3D‐printing methods, including lithography‐based 3D printing, template‐assisted electrodeposition‐based 3D printing, inkjet printing, direct ink writing, fused deposition modeling, and aerosol jet printing, are first summarized. Then, the significant achievements made in the development and printing of battery electrodes and electrolytes are highlighted. Finally, major challenges are discussed and potential research frontiers in developing 3D‐printed batteries are proposed. It is expected that with the continuous development of printing techniques and materials, 3D‐printed batteries with long‐term durability, favorable safety as well as high energy and power density will eventually be widely used in many fields.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
Ballistic carbon nanotube field-effect transistors
Javey, A., Guo, J., Wang, Q., Lundstrom, M., & Dai, H. (2003) · Nature · doi:10.1038/nature01797 · Cited by 3,187
Gür, T. M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01419a · Cited by 2,566
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
Lithium−Air Battery: Promise and Challenges
Girishkumar, G., McCloskey, B., Luntz, A. C., Swanson, S., & Wilcke, W. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1005384 · Cited by 2,528
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Wearable Electronics and Smart Textiles: A Critical Review
Stoppa, M., & Chiolerio, A. (2014) · Sensors · doi:10.3390/s140711957 · Cited by 2,107
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
A Reversible and Higher-Rate Li-O 2 Battery
Peng, Z., Freunberger, S. A., Chen, Y., & Bruce, P. G. (2012) · Science · doi:10.1126/science.1223985 · Cited by 1,915
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
A Novel Aluminum–Graphite Dual‐Ion Battery
Zhang, X., Tang, Y., Zhang, F., & Lee, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502588 · Cited by 1,604
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Progress in flexible lithium batteries and future prospects
Zhou, G., Li, F., & Cheng, H.-M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43182g · Cited by 1,498
Sodium and sodium-ion energy storage batteries
Ellis, B. L., & Nazar, L. F. (2012) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2012.04.002 · Cited by 1,460
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Three-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodes
Zhang, H., Yu, X., & Braun, P. V. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.38 · Cited by 1,072
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
3d printing technologies applied for food design: Status and prospects
Godoi, F. C., Prakash, S., & Bhandari, B. R. (2016) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2016.01.025 · Cited by 939
An, K. H., Kim, W. S., Park, Y. S., Moon, J.-M., Bae, D. J., Lim, S. C., Lee, Y. S., & Lee, Y. H. (2001) · Advanced Functional Materials · doi:10.1002/1616-3028(200110)11:5<387::aid-adfm387>3.0.co;2-g · Cited by 890
Towards a calcium-based rechargeable battery
Ponrouch, A., Frontera, C., Bardé, F., & Palacín, M. R. (2016) · Nature Materials · doi:10.1038/nmat4462 · Cited by 794
Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505391 · Cited by 758
Jakus, A. E., Secor, E. B., Rutz, A. L., Jordan, S. W., Hersam, M. C., & Shah, R. N. (2015) · ACS Nano · doi:10.1021/acsnano.5b01179 · Cited by 710
Pikul, J. H., Gang Zhang, H., Cho, J., Braun, P. V., & King, W. P. (2013) · Nature Communications · doi:10.1038/ncomms2747 · Cited by 635
Xu, L., Gutbrod, S. R., Bonifas, A. P., Su, Y., Sulkin, M. S., Lu, N., Chung, H.-J., Jang, K.-I., Liu, Z., Ying, M., et al. (2014) · Nature Communications · doi:10.1038/ncomms4329 · Cited by 634
3D printing in aerospace and its long-term sustainability
Joshi, S. C., & Sheikh, A. A. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1111519 · Cited by 628
Skin-inspired electronic devices
Chortos, A., & Bao, Z. (2014) · Materials Today · doi:10.1016/j.mattod.2014.05.006 · Cited by 571
3D Printing of Polymer Nanocomposites via Stereolithography
Manapat, J. Z., Chen, Q., Ye, P., & Advincula, R. C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600553 · Cited by 565
3D Printing of Graphene Aerogels
Zhang, Q., Zhang, F., Medarametla, S. P., Li, H., Zhou, C., & Lin, D. (2016) · Small · doi:10.1002/smll.201503524 · Cited by 532
Direct writing in three dimensions
Lewis, J. A., & Gratson, G. M. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00344-x · Cited by 507
3D printing technologies for electrochemical energy storage
Zhang, F., Wei, M., Viswanathan, V. V., Swart, B., Shao, Y., Wu, G., & Zhou, C. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.037 · Cited by 494
3D Printable Graphene Composite
Wei, X., Li, D., Jiang, W., Gu, Z., Wang, X., Zhang, Z., & Sun, Z. (2015) · Scientific Reports · doi:10.1038/srep11181 · Cited by 481
3D Printed Graphene Based Energy Storage Devices
Foster, C. W., Down, M. P., Zhang, Y., Ji, X., Rowley-Neale, S. J., Smith, G. C., Kelly, P. J., & Banks, C. E. (2017) · Scientific Reports · doi:10.1038/srep42233 · Cited by 471
3D Printing of Customized Li‐Ion Batteries with Thick Electrodes
Wei, T., Ahn, B. Y., Grotto, J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201703027 · Cited by 434
Anomalous scaling law of strength and toughness of cellulose nanopaper
Zhu, H., Zhu, S., Jia, Z., Parvinian, S., Li, Y., Vaaland, O., Hu, L., & Li, T. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1502870112 · Cited by 424
Characterization of microporous separators for lithium-ion batteries
Venugopal, G., Moore, J., Howard, J., & Pendalwar, S. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00168-2 · Cited by 417
A reversible long-life lithium–air battery in ambient air
Zhang, T., & Zhou, H. (2013) · Nature Communications · doi:10.1038/ncomms2855 · Cited by 415
Fast Electrochemistry of Conductive Polymer Nanotubes: Synthesis, Mechanism, and Application
Cho, S. I., & Lee, S. B. (2008) · Accounts of Chemical Research · doi:10.1021/ar7002094 · Cited by 410
Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review
Tian, X., Jin, J., Yuan, S., Chua, C. K., Tor, S. B., & Zhou, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700127 · Cited by 407
Recent Advancements in Polymer-Based Composite Electrolytes for Rechargeable Lithium Batteries
Tan, S.-J., Zeng, X.-X., Ma, Q., Wu, X.-W., & Guo, Y.-G. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0011-2 · Cited by 402
3D printed functional nanomaterials for electrochemical energy storage
Zhu, C., Liu, T., Qian, F., Chen, W., Chandrasekaran, S., Yao, B., Song, Y., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., et al. (2017) · Nano Today · doi:10.1016/j.nantod.2017.06.007 · Cited by 394
Principles of aerosol jet printing
Secor, E. B. (2018) · Flexible and Printed Electronics · doi:10.1088/2058-8585/aace28 · Cited by 377
3D‐Printed All‐Fiber Li‐Ion Battery toward Wearable Energy Storage
Wang, Y., Chen, C., Xie, H., Gao, T., Yao, Y., Pastel, G., Han, X., Li, Y., Zhao, J., Fu, K. (., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703140 · Cited by 374
Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices
Jiang, Y., Xu, Z., Huang, T., Liu, Y., Guo, F., Xi, J., Gao, W., & Gao, C. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707024 · Cited by 370
3D‐Printing Electrolytes for Solid‐State Batteries
McOwen, D. W., Xu, S., Gong, Y., Wen, Y., Godbey, G. L., Gritton, J. E., Hamann, T. R., Dai, J., Hitz, G. T., Hu, L., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707132 · Cited by 352
Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures
Derby, B. (2008) · Journal of Materials Chemistry · doi:10.1039/b807560c · Cited by 339
Zekoll, S., Marriner-Edwards, C., Hekselman, A. K. O., Kasemchainan, J., Kuss, C., Armstrong, D. E. J., Cai, D., Wallace, R. J., Richter, F. H., Thijssen, J. H. J., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02723k · Cited by 338
3D Printed High‐Performance Lithium Metal Microbatteries Enabled by Nanocellulose
Cao, D., Xing, Y., Tantratian, K., Wang, X., Ma, Y., Mukhopadhyay, A., Cheng, Z., Zhang, Q., Jiao, Y., Chen, L., et al. (2019) · Advanced Materials · doi:10.1002/adma.201807313 · Cited by 337
Extrusion‐Based 3D Printing of Hierarchically Porous Advanced Battery Electrodes
Lacey, S. D., Kirsch, D. J., Li, Y., Morgenstern, J. T., Zarket, B. C., Yao, Y., Dai, J., Garcia, L. Q., Liu, B., Gao, T., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705651 · Cited by 332
3D printed electrochemical energy storage devices
Chang, P., Mei, H., Zhou, S., Dassios, K. G., & Cheng, L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11860d · Cited by 329
Nanocellulose as green dispersant for two-dimensional energy materials
Li, Y., Zhu, H., Shen, F., Wan, J., Lacey, S., Fang, Z., Dai, H., & Hu, L. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.02.015 · Cited by 322
Ruiz-Morales, J. C., Tarancón, A., Canales-Vázquez, J., Méndez-Ramos, J., Hernández-Afonso, L., Acosta-Mora, P., Marín Rueda, J. R., & Fernández-González, R. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03526d · Cited by 299
Liu, C., Huang, N., Xu, F., Tong, J., Chen, Z., Gui, X., Fu, Y., & Lao, C. (2018) · Polymers · doi:10.3390/polym10060629 · Cited by 274
Zheng, X., Deotte, J., Alonso, M. P., Farquar, G. R., Weisgraber, T. H., Gemberling, S., Lee, H., Fang, N., & Spadaccini, C. M. (2012) · Review of Scientific Instruments · doi:10.1063/1.4769050 · Cited by 267
3D printing of multifunctional nanocomposites
Campbell, T. A., & Ivanova, O. S. (2013) · Nano Today · doi:10.1016/j.nantod.2012.12.002 · Cited by 261
3D Printing of Reduced Graphene Oxide Nanowires
Kim, J. H., Chang, W. S., Kim, D., Yang, J. R., Han, J. T., Lee, G., Kim, J. T., & Seol, S. K. (2015) · Advanced Materials · doi:10.1002/adma.201404380 · Cited by 258
Electrolytes for Li-ion transport – Review
Marcinek, M., Syzdek, J., Marczewski, M., Piszcz, M., Niedzicki, L., Kalita, M., Plewa-Marczewska, A., Bitner, A., Wieczorek, P., Trzeciak, T., et al. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.02.006 · Cited by 257
3D Printing Sulfur Copolymer‐Graphene Architectures for Li‐S Batteries
Shen, K., Mei, H., Li, B., Ding, J., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701527 · Cited by 256
Three-dimensional printed electronics
Lewis, J. A., & Ahn, B. Y. (2015) · Nature · doi:10.1038/518042a · Cited by 249
Lyu, Z., Lim, G. J. H., Guo, R., Kou, Z., Wang, T., Guan, C., Ding, J., Chen, W., & Wang, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806658 · Cited by 247
Holographic patterning of high-performance on-chip 3D lithium-ion microbatteries
Ning, H., Pikul, J. H., Zhang, R., Li, X., Xu, S. H., Wang, J., Rogers, J. A., King, W. P., & Braun, P. V. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1423889112 · Cited by 239
All-solid-state Al–air batteries with polymer alkaline gel electrolyte
Zhang, Z., Zuo, C., Liu, Z., Yu, Y., Zuo, Y., & Song, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.020 · Cited by 228
Ha, M., Seo, J.-W. T., Prabhumirashi, P. L., Zhang, W., Geier, M. L., Renn, M. J., Kim, C. H., Hersam, M. C., & Frisbie, C. D. (2013) · Nano Letters · doi:10.1021/nl3038773 · Cited by 222
Blake, A. J., Kohlmeyer, R. R., Hardin, J. O., Carmona, E. A., Maruyama, B., Berrigan, J. D., Huang, H., & Durstock, M. F. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602920 · Cited by 217
Hu, J., Jiang, Y., Cui, S., Duan, Y., Liu, T., Guo, H., Lin, L., Lin, Y., Zheng, J., Amine, K., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600856 · Cited by 214
Elevated‐Temperature 3D Printing of Hybrid Solid‐State Electrolyte for Li‐Ion Batteries
Cheng, M., Jiang, Y., Yao, W., Yuan, Y., Deivanayagam, R., Foroozan, T., Huang, Z., Song, B., Rojaee, R., Shokuhfar, T., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800615 · Cited by 214
Wang, J., Sun, Q., Gao, X., Wang, C., Li, W., Holness, F. B., Zheng, M. L., Li, R., Price, A. D., Sun, X., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b14797 · Cited by 211
Gratson, G. M., García‐Santamaría, F., Lousse, V., Xu, M., Fan, S., Lewis, J. A., & Braun, P. V. (2006) · Advanced Materials · doi:10.1002/adma.200501447 · Cited by 210
Maurel, A., Courty, M., Fleutot, B., Tortajada, H., Prashantha, K., Armand, M., Grugeon, S., Panier, S., & Dupont, L. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b02062 · Cited by 209
Choi, J.-W., Wicker, R., Lee, S.-H., Choi, K.-H., Ha, C.-S., & Chung, I. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.05.004 · Cited by 200
Inkjet Printing of Carbon Nanotubes
Tortorich, R., & Choi, J.-W. (2013) · Nanomaterials · doi:10.3390/nano3030453 · Cited by 199
Cao, C., Andrews, J. B., & Franklin, A. D. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201700057 · Cited by 179
Self-citationChoi, K.-H., Ahn, D. B., & Lee, S.-Y. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01086 · Cited by 179
Qiao, Y., Liu, Y., Chen, C., Xie, H., Yao, Y., He, S., Ping, W., Liu, B., & Hu, L. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201805899 · Cited by 178
Hou, H., Xu, Q., Pang, Y., Li, L., Wang, J., Zhang, C., & Sun, C. (2017) · Advanced Science · doi:10.1002/advs.201700072 · Cited by 170
Self-citationKim, S.-H., Choi, K.-H., Cho, S.-J., Yoo, J., Lee, S.-S., & Lee, S.-Y. (2018) · Energy & Environmental Science · doi:10.1039/c7ee01630a · Cited by 169
Inkjet-printed optoelectronics
Zhan, Z., An, J., Wei, Y., Tran, V. T., & Du, H. (2017) · Nanoscale · doi:10.1039/c6nr08220c · Cited by 167
Brown, E., Yan, P., Tekik, H., Elangovan, A., Wang, J., Lin, D., & Li, J. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107689 · Cited by 165
On the road toward calcium-based batteries
Ponrouch, A., & Palacin, M. R. (2018) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2018.02.001 · Cited by 164
Saleh, M. S., Li, J., Park, J., & Panat, R. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.07.006 · Cited by 163
Toward a remarkable Li-S battery via 3D printing
Gao, X., Sun, Q., Yang, X., Liang, J., Koo, A., Li, W., Liang, J., Wang, J., Li, R., Holness, F. B., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.12.001 · Cited by 161
Solidification of 3D Printed Nanofibril Hydrogels into Functional 3D Cellulose Structures
Håkansson, K. M. O., Henriksson, I. C., de la Peña Vázquez, C., Kuzmenko, V., Markstedt, K., Enoksson, P., & Gatenholm, P. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600096 · Cited by 160
Hedayat, N., Du, Y., & Ilkhani, H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.095 · Cited by 159
Inkjet-printed silicon as high performance anodes for Li-ion batteries
Lawes, S., Sun, Q., Lushington, A., Xiao, B., Liu, Y., & Sun, X. A. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.04.041 · Cited by 157
Direct write dispenser printing of a zinc microbattery with an ionic liquid gel electrolyte
Ho, C. C., Evans, J. W., & Wright, P. K. (2010) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/20/10/104009 · Cited by 149
Three-Dimensional Printing of Highly Conductive Carbon Nanotube Microarchitectures with Fluid Ink
Kim, J.-H., Lee, S., Wajahat, M., Jeong, H., Chang, W. S., Jeong, H. J., Yang, J., Kim, J. T., & Seol, S. K. (2016) · ACS Nano · doi:10.1021/acsnano.6b04771 · Cited by 147
Toward fast and cost-effective ink-jet printing of solid electrolyte for lithium microbatteries
Delannoy, P.-E., Riou, B., Lestriez, B., Guyomard, D., Brousse, T., & Bideau, J. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.164 · Cited by 131
Composite protective layer for Li metal anode in high-performance lithium–oxygen batteries
Lee, D. J., Lee, H., Song, J., Ryou, M., Lee, Y. M., Kim, H., & Park, J.-K. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2013.12.022 · Cited by 123
Preparation of 3D graphene-based architectures and their applications in supercapacitors
Yang, Z., Chabi, S., Xia, Y., & Zhu, Y. (2015) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2015.11.010 · Cited by 112
Printed Diodes: Materials Processing, Fabrication, and Applications
Chu, Y., Qian, C., Chahal, P. P., & Cao, C. C. (2019) · Advanced Science · doi:10.1002/advs.201801653 · Cited by 102
Self-citationKotobuki, M., Suzuki, Y., Munakata, H., Kanamura, K., Sato, Y., Yamamoto, K., & Yoshida, T. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3308459 · Cited by 100
3D-Printed Hierarchical Porous Frameworks for Sodium Storage
Ding, J., Shen, K. B., Du, Z., Li, B., & Yang, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b12892 · Cited by 97
Zhou, L., Ning, W.-W., Wu, C., Zhang, D., Wei, W. F., Ma, J., Li, C. C., & Chen, L. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800402 · Cited by 95
Electrochemical properties of LiCoO2 thin film electrode prepared by ink-jet printing technique
Huang, J., Yang, J., Li, W., Cai, W., & Jiang, Z. (2007) · Thin Solid Films · doi:10.1016/j.tsf.2007.09.039 · Cited by 87
Inkjet‐Printed Lithium–Sulfur Microcathodes for All‐Printed, Integrated Nanomanufacturing
Milroy, C., Jang, S., Fujimori, T., Dodabalapur, A., & Manthiram, A. (2017) · Small · doi:10.1002/smll.201603786 · Cited by 83
Perspectives on Energy Storage for Flexible Electronic Systems
MacKenzie, J. D., & Ho, C. C. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2015.2406340 · Cited by 82
High Capacity Rate Capable Aerosol Jet Printed Li‐Ion Battery Cathode
Deiner, L. J., Jenkins, T., Powell, A. S., Howell, T. G., & Rottmayer, M. A. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801281 · Cited by 76
Organic Solar Cell by Inkjet Printing—An Overview
Sumaiya, S., Kardel, K., & El‐Shahat, A. (2017) · Technologies · doi:10.3390/technologies5030053 · Cited by 72
Facile Micro Templating LiFePO4 Electrodes for High Performance Li‐Ion Batteries
Singh, D. P., Mulder, F. M., Abdelkader, A. M., et al. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200704 · Cited by 64
Recent Advances in Stretchable Supercapacitors Enabled by Low‐Dimensional Nanomaterials
Cao, C. C., Chu, Y., Zhou, Y., Zhang, C., & Qu, S. (2018) · Small · doi:10.1002/smll.201803976 · Cited by 64
Self-citationWu, Y., Chen, Y. X., Yan, J., Yang, S., Dong, P. X., & Soman, P. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00629e · Cited by 60
Creating Three‐Dimensional Polymeric Microstructures by Multi‐Beam Interference Lithography
Moon, J. H., & Yang, S. M. (2005) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15321790500304163 · Cited by 48
Fabrication of periodic micro-structures by holographic lithography
Stankevičius, E., Gedvilas, M., Voisiat, B., Malinauskas, M., & Račiukaitis, G. (2013) · Lithuanian Journal of Physics · doi:10.3952/lithjphys.53406 · Cited by 34
Ma, T., & MacKenzie, J. D. (2019) · Flexible and Printed Electronics · doi:10.1088/2058-8585/ab0b91 · Cited by 32
Holographic Fabrication of 3D Nanostructures
Jeon, T., Kim, D., & Park, S. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800330 · Cited by 28
Fully Printed Memristors from Cu–SiO2 Core–Shell Nanowire Composites
Catenacci, M. J., Flowers, P. F., Cao, C. C., Andrews, J. B., Franklin, A. D., & Wiley, B. J. (2017) · Journal of Electronic Materials · doi:10.1007/s11664-017-5445-5 · Cited by 27
Self-citationHuang, Z. X., Sim, G. J., Tan, J. C., Low, H. Y., & Yang, H. Y. (2018) · Energy Technology · doi:10.1002/ente.201700858 · Cited by 23
Cited by
Zhang, G., Zhang, X., Liu, H., Li, J., Chen, Y., & Duan, H. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003927 · Cited by 348
Inkjet Printing and 3D Printing Strategies for Biosensing, Analytical, and Diagnostic Applications
Zub, K., Hoeppener, S., & Schubert, U. S. (2022) · Advanced Materials · doi:10.1002/adma.202105015 · Cited by 287
Parale, V. G., Kim, T., Choi, H., Phadtare, V. D., Dhavale, R. P., Kanamori, K., & Park, H. (2024) · Advanced Materials · doi:10.1002/adma.202307772 · Cited by 146
Metadata
- Authors
- Pang, Y., Cao, Y., Chu, Y., Liu, M., Snyder, K., MacKenzie, D., & Cao, C.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-10-30
- Volume
- 30
- Issue
- 1
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2982660856
- Cited by
- 298
- References
- 113
- FWCI
- 11.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.