The DOI matches its Crossref record; 232 of the 232 references it cites were found in a registry or an index.
Advances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Controlling Electromagnetic Fields
Pendry, J. B., Schurig, D., & Smith, D. R. (2006) · Science · doi:10.1126/science.1125907 · Cited by 8,589
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Experimental Verification of a Negative Index of Refraction
Shelby, R. A., Smith, D. R., & Schultz, S. (2001) · Science · doi:10.1126/science.1058847 · Cited by 8,347
Metamaterial Electromagnetic Cloak at Microwave Frequencies
Schurig, D., Mock, J. J., Justice, B. J., Cummer, S. A., Pendry, J. B., Starr, A. F., & Smith, D. R. (2006) · Science · doi:10.1126/science.1133628 · Cited by 7,586
Metamaterials and Negative Refractive Index
Smith, D. R., Pendry, J. B., & Wiltshire, M. C. K. (2004) · Science · doi:10.1126/science.1096796 · Cited by 4,541
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Optical negative-index metamaterials
Shalaev, V. M. (2007) · Nature Photonics · doi:10.1038/nphoton.2006.49 · Cited by 2,801
Three-dimensional optical metamaterial with a negative refractive index
Valentine, J., Zhang, S., Zentgraf, T., Ulin-Avila, E., Genov, D. A., Bartal, G., & Zhang, X. (2008) · Nature · doi:10.1038/nature07247 · Cited by 2,309
Printing ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
A review of the recent research on vibration energy harvesting via bistable systems
Harne, R. L., & Wang, K. W. (2013) · Smart Materials and Structures · doi:10.1088/0964-1726/22/2/023001 · Cited by 1,351
Auxetic metamaterials and structures: a review
Ren, X., Das, R., Tran, P., Ngo, T. D., & Xie, Y. M. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aaa61c · Cited by 1,277
4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Volumetric additive manufacturing via tomographic reconstruction
Kelly, B. E., Bhattacharya, I., Heidari, H., Shusteff, M., Spadaccini, C. M., & Taylor, H. K. (2019) · Science · doi:10.1126/science.aau7114 · Cited by 1,025
Voxelated soft matter via multimaterial multinozzle 3D printing
Skylar-Scott, M. A., Mueller, J., Visser, C. W., & Lewis, J. A. (2019) · Nature · doi:10.1038/s41586-019-1736-8 · Cited by 1,024
Multistable Architected Materials for Trapping Elastic Strain Energy
Shan, S., Kang, S. H., Raney, J. R., Wang, P., Fang, L., Candido, F., Lewis, J. A., & Bertoldi, K. (2015) · Advanced Materials · doi:10.1002/adma.201501708 · Cited by 986
Mechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
Recent advances in carbon-fiber-reinforced thermoplastic composites: A review
Yao, S.-S., Jin, F., Rhee, K. Y., Hui, D., & Park, S. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.12.007 · Cited by 976
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Projection micro-stereolithography using digital micro-mirror dynamic mask
Sun, C., Fang, N., Wu, D. M., & Zhang, X. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.011 · Cited by 880
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Full-wave simulations of electromagnetic cloaking structures
Cummer, S. A., Popa, B.-I., Schurig, D., Smith, D. R., & Pendry, J. (2006) · Physical Review E · doi:10.1103/physreve.74.036621 · Cited by 803
Auxetic mechanical metamaterials
Kolken, H. M. A., & Zadpoor, A. A. (2017) · RSC Advances · doi:10.1039/c6ra27333e · Cited by 788
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Magnetic Shape Memory Polymers with Integrated Multifunctional Shape Manipulation
Ze, Q., Kuang, X., Wu, S., Wong, J., Montgomery, S. M., Zhang, R., Kovitz, J. M., Yang, F., Qi, H. J., & Zhao, R. (2020) · Advanced Materials · doi:10.1002/adma.201906657 · Cited by 735
Ge, Q., Dunn, C. K., Qi, H. J., & Dunn, M. L. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094007 · Cited by 726
Jakus, A. E., Secor, E. B., Rutz, A. L., Jordan, S. W., Hersam, M. C., & Shah, R. N. (2015) · ACS Nano · doi:10.1021/acsnano.5b01179 · Cited by 710
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Composites Reinforced in Three Dimensions by Using Low Magnetic Fields
Erb, R. M., Libanori, R., Rothfuchs, N., & Studart, A. R. (2012) · Science · doi:10.1126/science.1210822 · Cited by 675
Carroll, B. E., Otis, R., Borgonia, J. P., Suh, J.-O., Dillon, R. P., Shapiro, A. A., Hofmann, D. C., Liu, Z., & Beese, A. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.019 · Cited by 657
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
Bistable and Multistable Actuators for Soft Robots: Structures, Materials, and Functionalities
Chi, Y., Li, Y., Zhao, Y., Hong, Y., Tang, Y., & Yin, J. (2022) · Advanced Materials · doi:10.1002/adma.202110384 · Cited by 584
Grayscale digital light processing 3D printing for highly functionally graded materials
Kuang, X., Wu, J., Chen, K., Zhao, Z., Ding, Z., Hu, F., Fang, D., & Qi, H. J. (2019) · Science Advances · doi:10.1126/sciadv.aav5790 · Cited by 568
Auxetic Mechanical Metamaterials to Enhance Sensitivity of Stretchable Strain Sensors
Jiang, Y., Liu, Z., Matsuhisa, N., Qi, D., Leow, W. R., Yang, H., Yu, J., Chen, G., Liu, Y., Wan, C., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706589 · Cited by 542
3D printing of highly stretchable hydrogel with diverse UV curable polymers
Ge, Q., Chen, Z., Cheng, J., Zhang, B., Zhang, Y.-F., Li, H., He, X., Yuan, C., Liu, J., Magdassi, S., et al. (2021) · Science Advances · doi:10.1126/sciadv.aba4261 · Cited by 518
Designing bioinspired composite reinforcement architectures via 3D magnetic printing
Martin, J. J., Fiore, B. E., & Erb, R. M. (2015) · Nature Communications · doi:10.1038/ncomms9641 · Cited by 515
3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
Yang, C., Tian, X., Liu, T., Cao, Y., & Li, D. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2015-0098 · Cited by 515
Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers
Mao, Y., Yu, K., Isakov, M. S., Wu, J., Dunn, M. L., & Jerry Qi, H. (2015) · Scientific Reports · doi:10.1038/srep13616 · Cited by 510
Four-dimensional printing of liquid crystal elastomers
Ambulo, C. P., Burroughs, J. J., Boothby, J. M., Kim, H., Shankar, M. R., & Ware, T. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11851 · Cited by 508
Wei, H., Zhang, Q., Yao, Y., Liu, L., Liu, Y., & Leng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12824 · Cited by 504
Reentrant Origami-Based Metamaterials with Negative Poisson’s Ratio and Bistability
Yasuda, H., & Yang, J. (2015) · Physical Review Letters · doi:10.1103/physrevlett.114.185502 · Cited by 500
Ultrafast Digital Printing toward 4D Shape Changing Materials
Huang, L., Jiang, R., Wu, J., Song, J., Bai, H., Li, B., Zhao, Q., & Xie, T. (2017) · Advanced Materials · doi:10.1002/adma.201605390 · Cited by 490
Self-citation3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion
Wang, Q., Jackson, J. A., Ge, Q., Hopkins, J. B., Spadaccini, C. M., & Fang, N. X. (2016) · Physical Review Letters · doi:10.1103/physrevlett.117.175901 · Cited by 481
High-resolution tomographic volumetric additive manufacturing
Loterie, D., Delrot, P., & Moser, C. (2020) · Nature Communications · doi:10.1038/s41467-020-14630-4 · Cited by 461
Snapping Mechanical Metamaterials under Tension
Rafsanjani, A., Akbarzadeh, A., & Pasini, D. (2015) · Advanced Materials · doi:10.1002/adma.201502809 · Cited by 459
Multistable Shape‐Reconfigurable Architected Materials
Haghpanah, B., Salari‐Sharif, L., Pourrajab, P., Hopkins, J., & Valdevit, L. (2016) · Advanced Materials · doi:10.1002/adma.201601650 · Cited by 452
Reversible patterning and actuation of hydrogels by electrically assisted ionoprinting
Palleau, E., Morales, D., Dickey, M. D., & Velev, O. D. (2013) · Nature Communications · doi:10.1038/ncomms3257 · Cited by 445
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Hinton, T. J., Hudson, A., Pusch, K., Lee, A., & Feinberg, A. W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00170 · Cited by 437
Reprogrammable shape morphing of magnetic soft machines
Alapan, Y., Karacakol, A. C., Guzelhan, S. N., Isik, I., & Sitti, M. (2020) · Science Advances · doi:10.1126/sciadv.abc6414 · Cited by 434
Tailored Buckling Microlattices as Reusable Light‐Weight Shock Absorbers
Frenzel, T., Findeisen, C., Kadic, M., Gumbsch, P., & Wegener, M. (2016) · Advanced Materials · doi:10.1002/adma.201600610 · Cited by 432
Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Wang, Q., Dilmurat, A., Li, D., & Ziegmann, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.139 · Cited by 432
Harnessing bistability for directional propulsion of soft, untethered robots
Chen, T., Bilal, O. R., Shea, K., & Daraio, C. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1800386115 · Cited by 427
A review on functionally graded structures and materials for energy absorption
Xu, F., Zhang, X., & Zhang, H. (2018) · Engineering Structures · doi:10.1016/j.engstruct.2018.05.094 · Cited by 421
Shape-shifting structured lattices via multimaterial 4D printing
Boley, J. W., van Rees, W. M., Lissandrello, C., Horenstein, M. N., Truby, R. L., Kotikian, A., Lewis, J. A., & Mahadevan, L. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1908806116 · Cited by 420
Multi-shape active composites by 3D printing of digital shape memory polymers
Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24224 · Cited by 399
Static non-reciprocity in mechanical metamaterials
Coulais, C., Sounas, D., & Alù, A. (2017) · Nature · doi:10.1038/nature21044 · Cited by 392
Tough Composites Inspired by Mineralized Natural Materials: Computation, 3D printing, and Testing
Dimas, L. S., Bratzel, G. H., Eylon, I., & Buehler, M. J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300215 · Cited by 385
Molecularly-engineered, 4D-printed liquid crystal elastomer actuators
Saed, M. O., Ambulo, C. P., Kim, H., De, R., Raval, V., Searles, K., Siddiqui, D. A., Cue, J. M. O., Stefan, M. C., Shankar, M. R., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806412 · Cited by 383
3D‐Printed Mechanical Metamaterials with High Energy Absorption
Yuan, S., Chua, C. K., & Zhou, K. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800419 · Cited by 380
The recent development of vat photopolymerization: A review
Zhang, F., Zhu, L., Li, Z., Wang, S., Shi, J., Tang, W., Li, N., & Yang, J. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102423 · Cited by 375
Multimaterial actinic spatial control 3D and 4D printing
Schwartz, J. J., & Boydston, A. J. (2019) · Nature Communications · doi:10.1038/s41467-019-08639-7 · Cited by 343
Programmable Self‐Locking Origami Mechanical Metamaterials
Fang, H., Chu, S. A., Xia, Y., & Wang, K. (2018) · Advanced Materials · doi:10.1002/adma.201706311 · Cited by 328
Hao, W., Liu, Y., Zhou, H., Chen, H., & Fang, D. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2017.11.004 · Cited by 319
Xin, X., Liu, L., Liu, Y., & Leng, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004226 · Cited by 319
Lewicki, J. P., Rodriguez, J. N., Zhu, C., Worsley, M. A., Wu, A. S., Kanarska, Y., Horn, J. D., Duoss, E. B., Ortega, J. M., Elmer, W., et al. (2017) · Scientific Reports · doi:10.1038/srep43401 · Cited by 318
Yang, Y., Chen, Z., Song, X., Zhang, Z., Zhang, J., Shung, K. K., Zhou, Q., & Chen, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605750 · Cited by 316
Self-citationUetani, K., Ata, S., Tomonoh, S., Yamada, T., Yumura, M., & Hata, K. (2014) · Advanced Materials · doi:10.1002/adma.201401736 · Cited by 315
Electrically assisted 3D printing of nacre-inspired structures with self-sensing capability
Yang, Y., Li, X., Chu, M., Sun, H., Jin, J., Yu, K., Wang, Q., Zhou, Q., & Chen, Y. (2019) · Science Advances · doi:10.1126/sciadv.aau9490 · Cited by 310
Serbin, J., Ovsianikov, A., & Chichkov, B. (2004) · Optics Express · doi:10.1364/opex.12.005221 · Cited by 305
Hierarchical Auxetic Mechanical Metamaterials
Gatt, R., Mizzi, L., Azzopardi, J. I., Azzopardi, K. M., Attard, D., Casha, A., Briffa, J., & Grima, J. N. (2015) · Scientific Reports · doi:10.1038/srep08395 · Cited by 304
Binder jetting of ceramics: Powders, binders, printing parameters, equipment, and post-treatment
Lv, X., Ye, F., Cheng, L., Fan, S., & Liu, Y. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.04.012 · Cited by 302
Rotational 3D printing of damage-tolerant composites with programmable mechanics
Raney, J. R., Compton, B. G., Mueller, J., Ober, T. J., Shea, K., & Lewis, J. A. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1715157115 · Cited by 301
3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers
Yuan, C., Roach, D. J., Dunn, C. K., Mu, Q., Kuang, X., Yakacki, C. M., Wang, T. J., Yu, K., & Qi, H. J. (2017) · Soft Matter · doi:10.1039/c7sm00759k · Cited by 300
Luo, M., Tian, X., Shang, J., Zhu, W., Li, D., & Qin, Y. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.03.020 · Cited by 297
3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties
Stepashkin, А. А., Chukov, D. I., Senatov, F. S., Salimon, A. I., Korsunsky, A. M., & Kaloshkin, S. D. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.05.032 · Cited by 293
Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R. (2018) · ACS Nano · doi:10.1021/acsnano.8b02366 · Cited by 282
Zhuo, P., Li, S., Ashcroft, I. A., & Jones, A. I. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109143 · Cited by 282
Guided transition waves in multistable mechanical metamaterials
Jin, L., Khajehtourian, R., Mueller, J., Rafsanjani, A., Tournat, V., Bertoldi, K., & Kochmann, D. M. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1913228117 · Cited by 280
Bonatti, C., & Mohr, D. (2017) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.02.003 · Cited by 275
Designable dual-material auxetic metamaterials using three-dimensional printing
Wang, K., Chang, Y.-H., Chen, Y., Zhang, C., & Wang, B. (2015) · Materials & Design · doi:10.1016/j.matdes.2014.11.033 · Cited by 268
Digital material fabrication using mask‐image‐projection‐based stereolithography
Zhou, C., Chen, Y., Yang, Z., & Khoshnevis, B. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311312148 · Cited by 267
Additive manufacturing of polymeric composites from material processing to structural design
Yuan, S., Li, S., Zhu, J., & Tang, Y. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108903 · Cited by 267
Harinarayana, V., & Shin, Y. C. (2021) · Optics & Laser Technology · doi:10.1016/j.optlastec.2021.107180 · Cited by 259
Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges
Hasanov, S., Alkunte, S., Rajeshirke, M., Gupta, A., Huseynov, O., Fidan, I., Alifui-Segbaya, F., & Rennie, A. (2021) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp6010004 · Cited by 258
Origami by Frontal Photopolymerization
Zhao, Z., Wu, J., Mu, X., Chen, H., Qi, H. J., & Fang, D. (2017) · Science Advances · doi:10.1126/sciadv.1602326 · Cited by 256
3D Printing of Auxetic Metamaterials with Digitally Reprogrammable Shape
Lei, M., Hong, W., Zhao, Z., Hamel, C., Chen, M., Lu, H., & Qi, H. J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b06081 · Cited by 245
Soft mechanical metamaterials with unusual swelling behavior and tunable stress-strain curves
Zhang, H., Guo, X., Wu, J., Fang, D., & Zhang, Y. (2018) · Science Advances · doi:10.1126/sciadv.aar8535 · Cited by 239
Peng, X., Kuang, X., Roach, D. J., Wang, Y., Hamel, C. M., Lu, C., & Qi, H. J. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.101911 · Cited by 238
Magneto‐Mechanical Metamaterials with Widely Tunable Mechanical Properties and Acoustic Bandgaps
Montgomery, S. M., Wu, S., Kuang, X., Armstrong, C. D., Zemelka, C., Ze, Q., Zhang, R., Zhao, R., & Qi, H. J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202005319 · Cited by 232
Fused Deposition Technique for Continuous Fiber Reinforced Thermoplastic
Bettini, P., Alitta, G., Sala, G., & Di Landro, L. (2017) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-016-2459-8 · Cited by 226
Thermal meta-device in analogue of zero-index photonics
Li, Y., Zhu, K.-J., Peng, Y.-G., Li, W., Yang, T., Xu, H.-X., Chen, H., Zhu, X.-F., Fan, S., & Qiu, C.-W. (2019) · Nature Materials · doi:10.1038/s41563-018-0239-6 · Cited by 226
Self-citation4D printed origami metamaterials with tunable compression twist behavior and stress-strain curves
Tao, R., Ji, L., Li, Y., Wan, Z., Hu, W., Wu, W., Liao, B., Ma, L., & Fang, D. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108344 · Cited by 226
The Emerging Frontiers and Applications of High-Resolution 3D Printing
Mao, M., He, J., Li, X., Zhang, B., Lei, Q., Liu, Y., & Li, D. (2017) · Micromachines · doi:10.3390/mi8040113 · Cited by 224
Chen, D., & Zheng, X. (2018) · Scientific Reports · doi:10.1038/s41598-018-26980-7 · Cited by 222
Liu, H., Wang, F., Wu, W., Dong, X., & Sang, L. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.110382 · Cited by 220
Han, D., Yang, C., Fang, N. X., & Lee, H. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.031 · Cited by 216
Manufacturing and 3D printing of continuous carbon fiber prepreg filament
Hu, Q., Duan, Y., Zhang, H., Liu, D., Yan, B., & Peng, F. (2018) · Journal of Materials Science · doi:10.1007/s10853-017-1624-2 · Cited by 212
3D Printing of Materials with Tunable Failure via Bioinspired Mechanical Gradients
Kokkinis, D., Bouville, F., & Studart, A. R. (2018) · Advanced Materials · doi:10.1002/adma.201705808 · Cited by 212
Ultraviolet‐Assisted Direct‐Write Fabrication of Carbon Nanotube/Polymer Nanocomposite Microcoils
Lebel, L. L., Aïssa, B., Khakani, M. A. E., & Therriault, D. (2009) · Advanced Materials · doi:10.1002/adma.200902192 · Cited by 209
3D Printing Bioinspired Ceramic Composites
Feilden, E., Ferraro, C., Zhang, Q., García-Tuñón, E., D’Elia, E., Giuliani, F., Vandeperre, L., & Saiz, E. (2017) · Scientific Reports · doi:10.1038/s41598-017-14236-9 · Cited by 208
Novel ink for ambient condition printing of liquid crystal elastomers for 4D printing
Roach, D. J., Kuang, X., Yuan, C., Chen, K., & Qi, H. J. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aae96f · Cited by 208
Fabrication of tough epoxy with shape memory effects by UV-assisted direct-ink write printing
Chen, K., Kuang, X., Li, V., Kang, G., & Qi, H. J. (2018) · Soft Matter · doi:10.1039/c7sm02362f · Cited by 207
Symmetry-Breaking Actuation Mechanism for Soft Robotics and Active Metamaterials
Wu, S., Ze, Q., Zhang, R., Hu, N., Cheng, Y., Yang, F., & Zhao, R. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b13840 · Cited by 207
Harnessing instabilities for design of soft reconfigurable auxetic/chiral materials
Shim, J., Shan, S., Košmrlj, A., Kang, S. H., Chen, E. R., Weaver, J. C., & Bertoldi, K. (2013) · Soft Matter · doi:10.1039/c3sm51148k · Cited by 205
Hierarchical honeycomb auxetic metamaterials
Mousanezhad, D., Babaee, S., Ebrahimi, H., Ghosh, R., Hamouda, A. S., Bertoldi, K., & Vaziri, A. (2015) · Scientific Reports · doi:10.1038/srep18306 · Cited by 205
Bifurcation-based embodied logic and autonomous actuation
Jiang, Y., Korpas, L. M., & Raney, J. R. (2019) · Nature Communications · doi:10.1038/s41467-018-08055-3 · Cited by 200
Ma, C., Wu, S., Ze, Q., Kuang, X., Zhang, R., Qi, H. J., & Zhao, R. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c13863 · Cited by 199
Tang, Y., Lin, G., Han, L., Qiu, S., Yang, S., & Yin, J. (2015) · Advanced Materials · doi:10.1002/adma.201502559 · Cited by 195
Akhoundi, B., Behravesh, A. H., & Bagheri Saed, A. (2019) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684418807300 · Cited by 192
Directly coaxial 3D bioprinting of large-scale vascularized tissue constructs
Shao, L., Gao, Q., Xie, C., Fu, J., Xiang, M., & He, Y. (2020) · Biofabrication · doi:10.1088/1758-5090/ab7e76 · Cited by 188
Wei, H., Cauchy, X., Navas, I. O., Abderrafai, Y., Chizari, K., Sundararaj, U., Liu, Y., Leng, J., & Therriault, D. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04245 · Cited by 182
Dong, K., Panahi-Sarmad, M., Cui, Z., Huang, X., & Xiao, X. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108994 · Cited by 173
3D printing of continuous fiber-reinforced thermoset composites
He, X., Ding, Y., Lei, Z., Welch, S., Zhang, W., Dunn, M. L., & Yu, K. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.101921 · Cited by 171
Takezawa, A., & Kobashi, M. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.07.054 · Cited by 169
4D Printing of Freestanding Liquid Crystal Elastomers via Hybrid Additive Manufacturing
Peng, X., Wu, S., Sun, X., Yue, L., Montgomery, S. M., Demoly, F., Zhou, K., Zhao, R. R., & Qi, H. J. (2022) · Advanced Materials · doi:10.1002/adma.202204890 · Cited by 168
4D printed multi-stable metamaterials with mechanically tunable performance
Tao, R., Xi, L., Wu, W., Li, Y., Liao, B., Liu, L., Leng, J., & Fang, D. (2020) · Composite Structures · doi:10.1016/j.compstruct.2020.112663 · Cited by 166
Soft network materials with isotropic negative Poisson's ratios over large strains
Liu, J., & Zhang, Y. (2018) · Soft Matter · doi:10.1039/c7sm02052j · Cited by 165
Kowsari, K., Akbari, S., Wang, D., Fang, N. X., & Ge, Q. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2018.0004 · Cited by 162
Multi-Material Direct Ink Writing (DIW) for Complex 3D Metallic Structures with Removable Supports
Xu, C., Quinn, B., Lebel, L. L., Therriault, D., & L’Éspérance, G. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b19986 · Cited by 162
General, Vertical, Three-Dimensional Printing of Two-Dimensional Materials with Multiscale Alignment
Liang, Z., Pei, Y., Chen, C., Jiang, B., Yao, Y., Xie, H., Jiao, M., Chen, G., Li, T., Yang, B., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b04202 · Cited by 162
Yang, H., & Ma, L. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108430 · Cited by 161
Direct coherent multi-ink printing of fabric supercapacitors
Zhao, J., Lu, H., Zhang, Y., Yu, S. Y., Malyi, O. I., Zhao, X., Wang, H., Wang, H., Peng, J., Li, X., et al. (2021) · Science Advances · doi:10.1126/sciadv.abd6978 · Cited by 161
Three-dimensional printing of freeform helical microstructures: a review
Farahani, R. D., Chizari, K., & Therriault, D. (2014) · Nanoscale · doi:10.1039/c4nr02041c · Cited by 160
Multifunctional 3D lattice metamaterials for vibration mitigation and energy absorption
Jiang, W., Yin, G., Xie, L., et al. (2022) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2022.107678 · Cited by 156
Zhu, Q. L., Dai, C. F., Wagner, D., Daab, M., Hong, W., Breu, J., Zheng, Q., & Wu, Z. L. (2020) · Advanced Materials · doi:10.1002/adma.202005567 · Cited by 154
Desolvation Induced Origami of Photocurable Polymers by Digit Light Processing
Zhao, Z., Wu, J., Mu, X., Chen, H., Qi, H. J., & Fang, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600625 · Cited by 153
Zhang, H., Wu, J. J., Fang, D., & Zhang, Y. (2021) · Science Advances · doi:10.1126/sciadv.abf1966 · Cited by 150
Liquid-induced topological transformations of cellular microstructures
Li, S., Deng, B., Grinthal, A., Schneider‐Yamamura, A., Kang, J., Martens, R. S., Zhang, C., Li, J., Yu, S., Bertoldi, K., et al. (2021) · Nature · doi:10.1038/s41586-021-03404-7 · Cited by 150
Liu, Y., Zhang, W., Zhang, F., Lan, X., Leng, J., Liu, S., Jia, X., Cotton, C., Sun, B., Gu, B., et al. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.07.053 · Cited by 148
Highly stretchable two-dimensional auxetic metamaterial sheets fabricated via direct-laser cutting
Mizzi, L., Salvati, E., Spaggiari, A., Tan, J., & Korsunsky, A. M. (2019) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2019.105242 · Cited by 147
Additively manufactured metallic pentamode meta-materials
Hedayati, R., Leeflang, A. M., & ZADPOOR, A. A. (2017) · Applied Physics Letters · doi:10.1063/1.4977561 · Cited by 145
3D printed self‐expandable vascular stents from biodegradable shape memory polymer
Jia, H., Gu, S., & Chang, K. (2018) · Advances in Polymer Technology · doi:10.1002/adv.22091 · Cited by 144
Fabrication of multi-scale and tunable auxetic scaffolds for tissue engineering
Jin, Y. Q., Xie, C., Gao, Q., Zhou, X., Li, G., Du, J., & He, Y. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109277 · Cited by 142
Self-citationAn, X., Lai, C., He, W., & Fan, H. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109232 · Cited by 141
Chen, T., Mueller, J., & Shea, K. (2017) · Scientific Reports · doi:10.1038/srep45671 · Cited by 137
Harnessing Buckling to Design Architected Materials that Exhibit Effective Negative Swelling
Liu, J., Gu, T., Shan, S., Kang, S. H., Weaver, J. C., & Bertoldi, K. (2016) · Advanced Materials · doi:10.1002/adma.201600812 · Cited by 135
Bunea, A., Iniesta, N. D. C., Droumpali, A., Wetzel, A. E., Engay, E. L., & Taboryski, R. (2021) · Micro · doi:10.3390/micro1020013 · Cited by 135
SMP-based chiral auxetic mechanical metamaterial with tunable bandgap function
Wei, Y., Yang, Q., & Tao, R. (2021) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2021.106267 · Cited by 131
4D printing soft robots guided by machine learning and finite element models
Zolfagharian, A., Durran, L., Gharaie, S., Rolfe, B., Kaynak, A., & Bodaghi, M. (2021) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2021.112774 · Cited by 124
Active Reconfigurable Tristable Square‐Twist Origami
Wang, L., Song, W., Zhang, Y., Qu, M., Zhao, Z., Chen, M., Yang, Y., Chen, H., & Fang, D. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909087 · Cited by 123
Programming Shape-Morphing Behavior of Liquid Crystal Elastomers via Parameter-Encoded 4D Printing
Ren, L., Li, B., He, Y., Song, Z., Zhou, X., Liu, Q., & Ren, L. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c00027 · Cited by 121
Self-citation3D Printing of Cantilever-Type Microstructures by Stereolithography of Ferromagnetic Photopolymers
Credi, C., Fiorese, A., Tironi, M., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08880 · Cited by 117
3D printed origami honeycombs with tailored out-of-plane energy absorption behavior
Townsend, S., Adams, R., Robinson, M., Hanna, B., & Theobald, P. S. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108930 · Cited by 113
Lu, L., Guo, P. Y., & Pan, Y. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4035964 · Cited by 111
4D Printing of Origami Structures for Minimally Invasive Surgeries Using Functional Scaffold
Langford, T., Mohammed, A., Essa, K., ElShaer, A., & Hassanin, H. S. (2020) · Applied Sciences · doi:10.3390/app11010332 · Cited by 111
Liquid‐Crystal‐Elastomer‐Actuated Reconfigurable Microscale Kirigami Metastructures
Zhang, M., Shahsavan, H., Guo, Y., Pena‐Francesch, A., Zhang, Y., & Sitti, M. (2021) · Advanced Materials · doi:10.1002/adma.202008605 · Cited by 109
Separated 3D printing of continuous carbon fiber reinforced thermoplastic polyimide
Ye, W., Lin, G., Wu, W., Geng, P., Hu, X., Gao, Z., & Zhao, J. X. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.04.002 · Cited by 108
3D‐Printed Silicone Soft Architectures with Programmed Magneto‐Capillary Reconfiguration
Roh, S., Okello, L. B., Golbasi, N. C., Hankwitz, J. P., Liu, J. A. ‐., Tracy, J. B., & Velev, O. D. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800528 · Cited by 107
Liu, X., Carter, S. D., Renes, M. J., Kim, J., Rojas‐Canales, D. M., Penko, D., Angus, C., Beirne, S., Drogemuller, C., Yue, Z., et al. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801181 · Cited by 105
3D Printing Ionogel Auxetic Frameworks for Stretchable Sensors
Wong, J., Gong, A. T., Defnet, P. A., Meabe, L., Beauchamp, B., Sweet, R. M., Sardón, H., Cobb, C. L., & Nelson, A. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900452 · Cited by 104
4D Printed Multifunctional Composites with Cooling‐Rate Mediated Tunable Shape Morphing
Roach, D. J., Sun, X., Peng, X., Demoly, F., Zhou, K., & Qi, H. J. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202203236 · Cited by 102
Greenhall, J., & Raeymaekers, B. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700122 · Cited by 101
Large Shape Transforming 4D Auxetic Structures
Wagner, M. A., Chen, T., & Shea, K. (2017) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0027 · Cited by 101
Hierarchically self-morphing structure through 4D printing
Teoh, J. E. M., An, J., Chua, C. K., Lv, M. Y., Krishnasamy, V., & Liu, Y. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1272174 · Cited by 98
Wu, T., Jiang, P., Zhang, X., Guo, Y., Ji, Z., Jia, X., Wang, X., Zhou, X., & Liu, W. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107947 · Cited by 98
Self-citation4D printing of a self-morphing polymer driven by a swellable guest medium
Su, J., Tao, X., Deng, H., Zhang, C., Jiang, S., Lin, Y., & Lin, J. (2017) · Soft Matter · doi:10.1039/c7sm01796k · Cited by 97
Thermomechanically Triggered Two‐Stage Pattern Switching of 2D Lattices for Adaptive Structures
Yuan, C., Mu, X., Dunn, C. K., Haidar, J., Wang, T., & Qi, H. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705727 · Cited by 92
Multistable Thermal Actuators Via Multimaterial 4D Printing
Jeong, H. Y., Lee, E., Ha, S., Kim, N., & Jun, Y. C. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800495 · Cited by 92
Chen, T., & Shea, K. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0118 · Cited by 90
4D printed programmable auxetic metamaterials with shape memory effects
Wan, M., Yu, K., & Sun, H. (2021) · Composite Structures · doi:10.1016/j.compstruct.2021.114791 · Cited by 90
Magnetic quadrupole assemblies with arbitrary shapes and magnetizations
Gu, H., Boehler, Q., Ahmed, D., et al. (2019) · Science Robotics · doi:10.1126/scirobotics.aax8977 · Cited by 88
Biomimetic Nonuniform, Dual-Stimuli Self-Morphing Enabled by Gradient Four-Dimensional Printing
Song, Z., Ren, L., Zhao, C., Liu, H., Yu, Z., Liu, Q., & Ren, L. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17577 · Cited by 87
Self-citation4D printed auxetic structures with tunable mechanical properties
Yousuf, M. H., Abuzaid, W. Z., & Alkhader, M. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101364 · Cited by 87
Programmable soft bending actuators with auxetic metamaterials
Pan, Q., Chen, S., Chen, F., & Zhu, X. (2020) · Science China Technological Sciences · doi:10.1007/s11431-020-1741-2 · Cited by 86
Gao, Z., Wang, H., Hua, S., Sun, T., Wu, Y. X., Leung, C. L. A., & Wang, H. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110345 · Cited by 85
Gurr, M., Hofmann, D., Ehm, M., et al. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200800344 · Cited by 84
Yang, H., Wang, B., & Ma, L. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.01.076 · Cited by 84
3D printing of twisting and rotational bistable structures with tuning elements
Jeong, H. Y., An, S., Seo, I. C., Lee, E., Ha, S., Kim, N., & Jun, Y. C. (2019) · Scientific Reports · doi:10.1038/s41598-018-36936-6 · Cited by 84
Liu, Y., Zhang, F., Leng, J., Fu, K. K., Lu, X. L., Wang, L., Cotton, C., Sun, B., Gu, B., & Chou, T. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900600 · Cited by 84
Skin-inspired, open mesh electrochemical sensors for lactate and oxygen monitoring
Ashley, B. K., Brown, M. S., Park, Y., Kuan, S., & Koh, A. (2019) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2019.02.041 · Cited by 83
Loh, L. Y. W., Gupta, U., Wang, Y., Foo, C. C., Zhu, J., & Lu, W. F. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202001082 · Cited by 83
Rapid Volatilization Induced Mechanically Robust Shape-Morphing Structures toward 4D Printing
Zhang, Q., Kuang, X., Weng, S., Zhao, Z., Chen, H., Fang, D., & Qi, H. J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c02038 · Cited by 81
Photoactivated Polymeric Bilayer Actuators Fabricated via 3D Printing
Hagaman, D., Leist, S. K., Zhou, J. G., & Ji, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08503 · Cited by 80
3D printing of complex origami assemblages for reconfigurable structures
Zhao, Z., Kuang, X., Wu, J., Zhang, Q., Paulino, G. H., Qi, H. J., & Fang, D. (2018) · Soft Matter · doi:10.1039/c8sm01341a · Cited by 80
Asif, S., Chansoria, P., & Shirwaiker, R. A. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.029 · Cited by 75
Bioprinting of Cell‐Laden Microfiber: Can It Become a Standard Product?
Shao, L., Gao, Q., Xie, C., Fu, J., Xiang, M., & He, Y. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900014 · Cited by 74
High fidelity volumetric additive manufacturing
Bhattacharya, I., Toombs, J. T., & Taylor, H. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102299 · Cited by 74
Zhang, Z., Dou, J.-X., He, J.-H., Xiao, C.-X., Shen, L.-Y., Yang, J., Wang, Y., & Zhou, Z. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00828g · Cited by 73
3D Printing of Free‐Standing Stretchable Electrodes with Tunable Structure and Stretchability
Wei, H., Li, K., Liu, W., Meng, H., Zhang, P. X., & Yan, C. Y. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700341 · Cited by 73
Shintake, J., Nagai, T., & Ogishima, K. (2019) · Frontiers in Robotics and AI · doi:10.3389/frobt.2019.00127 · Cited by 73
Mechanical Properties Tailoring of 3D Printed Photoresponsive Nanocellulose Composites
Müller, L., Zimmermann, T., Nyström, G., Burgert, I., & Siqueira, G. D. F. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202002914 · Cited by 73
Multimaterial direct 4D printing of high stiffness structures with large bending curvature
Yuan, C., Wang, F., & Ge, Q. (2020) · Extreme Mechanics Letters · doi:10.1016/j.eml.2020.101122 · Cited by 73
Symmetry breaking and optical negative index of closed nanorings
Kanté, B., Park, Y.-S., O’Brien, K. P., Shuldman, D., Lanzillotti-Kimura, N. D., Wong, Z. J., Yin, X., & Zhang, X. (2012) · Nature Communications · doi:10.1038/ncomms2161 · Cited by 72
Functional Molecularly Imprinted Polymer Microstructures Fabricated Using Microstereolithography
Conrad, P. G., Nishimura, P. T., Aherne, D., Schwartz, B. J., Wu, D. M., Fang, N. X., Zhang, X., Roberts, M. J., & Shea, K. J. (2003) · Advanced Materials · doi:10.1002/adma.200304602 · Cited by 71
Adaptive reversible composite-based shape memory alloy soft actuators
Dezaki, M. L., Bodaghi, M., Serjouei, A., Afazov, S. M., & Zolfagharian, A. (2022) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2022.113779 · Cited by 69
3D printing of materials with spatially non-linearly varying properties
Ren, L., Song, Z., Liu, H., Han, Q., Zhao, C., Derby, B., Liu, Q., & Ren, L. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.012 · Cited by 67
Self-citation3D printed active origami with complicated folding patterns
Yuan, C., Wang, T., Dunn, M. L., et al. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0034-x · Cited by 66
Twistable Origami and Kirigami: from Structure-Guided Smartness to Mechanical Energy Storage
Wang, L., Song, W., & Fang, D. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b17776 · Cited by 65
Teoh, J. E. M., Zhao, Y., An, J., Chua, C. K., & Liu, Y. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa908a · Cited by 64
Lu, Z., Lu, F., Cao, J., et al. (2014) · Materials and Manufacturing Processes · doi:10.1080/10426914.2013.872269 · Cited by 62
Origami spring–inspired metamaterials and robots: An attempt at fully programmable robotics
Hu, F., Wang, W., Cheng, J., & Bao, Y. (2020) · Science Progress · doi:10.1177/0036850420946162 · Cited by 62
Direct ink writing techniques for in situ gelation and solidification
Wilt, J. K., Gilmer, D., Kim, S., Compton, B. G., & Saito, T. (2021) · MRS Communications · doi:10.1557/s43579-020-00006-8 · Cited by 62
A novel mechanical metamaterial with simultaneous stretching- and compression-expanding property
Wu, W., Liu, P., & Kang, Z. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109930 · Cited by 61
Cited by
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Metadata
- Authors
- Zhou, X., Ren, L., Song, Z., Li, G., Zhang, J., Li, B., Wu, Q., Li, W., Ren, L., & Liu, Q.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2023-04
- Volume
- 254
- Pages
- 110585
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W4319224835
- Cited by
- 277
- References
- 232
- FWCI
- 27.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.