The DOI matches its Crossref record; 105 of the 105 references it cites were found in a registry or an index.
Printability–A key issue in extrusion-based bioprinting
Open accessAbstract
Three-dimensional (3D) extrusion-based bioprinting is widely used in tissue engineering and regenerative medicine to create cell-incorporated constructs or scaffolds based on the extrusion technique. One critical issue in 3D extrusion-based bioprinting is printability or the capability to form and maintain reproducible 3D scaffolds from bioink (a mixture of biomaterials and cells). Research shows that printability can be affected by many factors or parameters, including those associated with the bioink, printing process, and scaffold design, but these are far from certain. This review highlights recent developments in the printability assessment of extrusion-based bioprinting with a focus on the definition of printability, printability measurements and characterization, and printability-affecting factors. Key issues and challenges related to printability are also identified and discussed, along with approaches or strategies for improving printability in extrusion-based bioprinting.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED: Clinical transplantation of a tissue-engineered airway
Macchiarini, P., Jungebluth, P., Go, T., Asnaghi, M. A., Rees, L. E., Cogan, T. A., Dodson, A., Martorell, J., Bellini, S., Parnigotto, P. P., et al. (2008) · The Lancet · doi:10.1016/s0140-6736(08)61598-6 · Cited by 1,433
RetractedA 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Tissue-engineered autologous bladders for patients needing cystoplasty
Atala, A., Bauer, S. B., Soker, S., Yoo, J. J., & Retik, A. B. (2006) · The Lancet · doi:10.1016/s0140-6736(06)68438-9 · Cited by 1,833
Scaffolding in tissue engineering: general approaches and tissue-specific considerations
Chan, B. P., & Leong, K. W. (2008) · European Spine Journal · doi:10.1007/s00586-008-0745-3 · Cited by 1,708
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
The bioink: A comprehensive review on bioprintable materials
Hospodiuk, M., Dey, M., Sosnoski, D., & Ozbolat, I. T. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.12.006 · Cited by 1,118
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
Bioinspired engineering of honeycomb structure – Using nature to inspire human innovation
Zhang, Q., Yang, X., Li, P., Huang, G., Feng, S., Shen, C., Han, B., Zhang, X., Jin, F., Xu, F., et al. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.05.001 · Cited by 836
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
Banerjee, A., Arha, M., Choudhary, S., Ashton, R. S., Bhatia, S. R., Schaffer, D. V., & Kane, R. S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.05.050 · Cited by 673
Research on the printability of hydrogels in 3D bioprinting
He, Y., Yang, F., Zhao, H., Gao, Q., Xia, B., & Fu, J. (2016) · Scientific Reports · doi:10.1038/srep29977 · Cited by 654
Strengthening Alginate/Polyacrylamide Hydrogels Using Various Multivalent Cations
Yang, C. H., Wang, M. X., Haider, H., Yang, J. H., Sun, J.-Y., Chen, Y. M., Zhou, J., & Suo, Z. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am403966x · Cited by 649
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Bio-ink properties and printability for extrusion printing living cells
Chung, J. H. Y., Naficy, S., Yue, Z., Kapsa, R., Quigley, A., Moulton, S. E., & Wallace, G. G. (2013) · Biomaterials Science · doi:10.1039/c3bm00012e · Cited by 610
Sobral, J. M., Caridade, S. G., Sousa, R. A., Mano, J. F., & Reis, R. L. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.11.003 · Cited by 561
Engineering alginate as bioink for bioprinting
Jia, J., Richards, D. J., Pollard, S., Tan, Y., Rodriguez, J., Visconti, R. P., Trusk, T. C., Yost, M. J., Yao, H., Markwald, R. R., et al. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.034 · Cited by 549
Evaluation of hydrogels for bio‐printing applications
Murphy, S. V., Skardal, A., & Atala, A. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34326 · Cited by 543
Moroni, L., de Wijn, J. R., & van Blitterswijk, C. A. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.023 · Cited by 534
Gao, T., Gillispie, G. J., Copus, J. S., PR, A. K., Seol, Y.-J., Atala, A., Yoo, J. J., & Lee, S. J. (2018) · Biofabrication · doi:10.1088/1758-5090/aacdc7 · Cited by 510
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495
A unified in vitro evaluation for apatite-forming ability of bioactive glasses and their variants
Maçon, A. L. B., Kim, T. B., Valliant, E. M., Goetschius, K., Brow, R. K., Day, D. E., Hoppe, A., Boccaccini, A. R., Kim, I. Y., Ohtsuki, C., et al. (2015) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-015-5403-9 · Cited by 489
3D Cell Culture in Alginate Hydrogels
Andersen, T., Auk-Emblem, P., & Dornish, M. (2015) · Microarrays · doi:10.3390/microarrays4020133 · Cited by 472
An overview of functionally graded additive manufacturing
Loh, G. H., Pei, E., Harrison, D., & Monzón, M. D. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.023 · Cited by 459
Amani, H., Arzaghi, H., Bayandori, M., Dezfuli, A. S., Pazoki‐Toroudi, H., Shafiee, A., & Moradi, L. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201900572 · Cited by 436
Duan, B., Kapetanovic, E., Hockaday, L. A., & Butcher, J. T. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.005 · Cited by 436
Assessment methodologies for extrusion-based bioink printability
Gillispie, G., Prim, P., Copus, J., Fisher, J., Mikos, A. G., Yoo, J. J., Atala, A., & Lee, S. J. (2020) · Biofabrication · doi:10.1088/1758-5090/ab6f0d · Cited by 426
Three-dimensional bioprinting of complex cell laden alginate hydrogel structures
Tabriz, A. G., Hermida, M. A., Leslie, N. R., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045012 · Cited by 393
The use of physical hydrogels of chitosan for skin regeneration following third-degree burns
Boucard, N., Viton, C., Agay, D., Mari, E., Roger, T., Chancerelle, Y., & Domard, A. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.04.021 · Cited by 378
New Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks
Lim, K. S., Schon, B. S., Mekhileri, N. V., Brown, G. C. J., Chia, C. M., Prabakar, S., Hooper, G. J., & Woodfield, T. B. F. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00149 · Cited by 362
Wüst, S., Godla, M. E., Müller, R., & Hofmann, S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.016 · Cited by 357
3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel
Habib, A., Sathish, V., Mallik, S., & Khoda, B. (2018) · Materials · doi:10.3390/ma11030454 · Cited by 330
Design and Printing Strategies in 3D Bioprinting of Cell‐Hydrogels: A Review
Lee, J. M., & Yeong, W. Y. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600435 · Cited by 310
Clinical Application of Tissue Engineered Human Heart Valves Using Autologous Progenitor Cells
Cebotari, S., Lichtenberg, A., Tudorache, I., Hilfiker, A., Mertsching, H., Leyh, R., Breymann, T., Kallenbach, K., Maniuc, L., Batrinac, A., et al. (2006) · Circulation · doi:10.1161/circulationaha.105.001065 · Cited by 299
Successful application of tissue engineered vascular autografts: clinical experience
Matsumura, G., Hibino, N., Ikada, Y., Kurosawa, H., & Shin’oka, T. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00043-7 · Cited by 276
Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication
Jiang, T., Munguia-Lopez, J. G., Flores-Torres, S., Kort-Mascort, J., & Kinsella, J. M. (2019) · Applied Physics Reviews · doi:10.1063/1.5059393 · Cited by 243
Rheological study on 3D printability of alginate hydrogel and effect of graphene oxide
Li, H., Liu, S., & Li, L. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.2016.02.007 · Cited by 239
Bioinspired Wetting Surface via Laser Microfabrication
Chen, F., Zhang, D., Yang, Q., Yong, J., Du, G., Si, J., Yun, F., & Hou, X. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401677z · Cited by 223
Snyder, J. E., Hamid, Q., Wang, C., Chang, R., Emami, K., Wu, H., & Sun, W. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034112 · Cited by 210
Printability and Cell Viability in Bioprinting Alginate Dialdehyde-Gelatin Scaffolds
Soltan, N., Ning, L., Mohabatpour, F., Papagerakis, P., & Chen, X. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00167 · Cited by 204
Self-citationStrategic Design and Fabrication of Engineered Scaffolds for Articular Cartilage Repair
Izadifar, Z., Chen, X., & Kulyk, W. (2012) · Journal of Functional Biomaterials · doi:10.3390/jfb3040799 · Cited by 203
Pan, T., Song, W., Cao, X., & Wang, Y. (2016) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2016.01.007 · Cited by 201
Recent advances in high-strength and elastic hydrogels for 3D printing in biomedical applications
Xu, C., Dai, G., & Hong, Y. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.032 · Cited by 190
Gao, G., Park, J. Y., Kim, B. S., Jang, J., & Cho, D. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201801102 · Cited by 185
Kim, M. H., Lee, Y. W., Jung, W.-K., Oh, J., & Nam, S. Y. (2019) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2019.06.014 · Cited by 175
Olubamiji, A. D., Izadifar, Z., Si, J. L., Cooper, D. M. L., Eames, B. F., & Chen, D. X. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025020 · Cited by 174
Gleadall, A., Visscher, D., Yang, J., Thomas, D., & Segal, J. (2018) · Burns & Trauma · doi:10.1186/s41038-018-0121-4 · Cited by 172
Direct 3D Printed Biomimetic Scaffolds Based on Hydrogel Microparticles for Cell Spheroid Growth
Zhang, H., Cong, Y., Osi, A. R., Zhou, Y., Huang, F., Zaccaria, R. P., Chen, J., Wang, R., & Fu, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910573 · Cited by 172
Domingos, M., Chiellini, F., Gloria, A., Ambrosio, L., Bartolo, P., & Chiellini, E. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211193502 · Cited by 164
Electrospun scaffold tailored for tissue‐specific extracellular matrix
Teo, W., He, W., & Ramakrishna, S. (2006) · Biotechnology Journal · doi:10.1002/biot.200600044 · Cited by 164
Perspectives and Challenges in Tissue Engineering and Regenerative Medicine
Langer, R. (2009) · Advanced Materials · doi:10.1002/adma.200902589 · Cited by 160
Park, J., Lee, S. J., Chung, S., Lee, J. H., Kim, W. D., Lee, J. Y., & Park, S. A. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.10.069 · Cited by 158
Jin, Y., Chai, W., & Huang, Y. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.05.144 · Cited by 158
Naghieh, S., Sarker, M. D., Sharma, N. K., Barhoumi, Z., & Chen, D. (2019) · Applied Sciences · doi:10.3390/app10010292 · Cited by 155
Self-citationYou, F., Wu, X., & Chen, D. (2016) · International Journal of Polymeric Materials · doi:10.1080/00914037.2016.1201830 · Cited by 153
Domingos, M. A. N., Intranuovo, F., Russo, T., Santis, R. D., Gloria, A., Ambrosio, L., Ciurana, J., & Bártolo, P. (2013) · Biofabrication · doi:10.1088/1758-5082/5/4/045004 · Cited by 146
Itô, A., Mase, A., Takizawa, Y., Shinkai, M., Honda, H., Hata, K.-I., Ueda, M., & Kobayashi, T. (2003) · Journal of Bioscience and Bioengineering · doi:10.1016/s1389-1723(03)80129-9 · Cited by 143
Govindharaj, M., Roopavath, U. K., & Rath, S. N. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.082 · Cited by 143
Simulations of 3D bioprinting: predicting bioprintability of nanofibrillar inks
Göhl, J., Markstedt, K., Mark, A., Håkansson, K. M. O., Gatenholm, P., & Edelvik, F. (2018) · Biofabrication · doi:10.1088/1758-5090/aac872 · Cited by 139
Pulsatile Myocardial Tubes Fabricated With Cell Sheet Engineering
Sekine, H., Shimizu, T., Yang, J., Kobayashi, E., & Okano, T. (2006) · Circulation · doi:10.1161/circulationaha.105.000273 · Cited by 135
Naghieh, S., Karamooz-Ravari, M. R., Sarker, M. D., Karki, E., & Chen, D. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.01.034 · Cited by 130
Self-citationDing, H., & Chang, R. C. (2018) · Applied Sciences · doi:10.3390/app8030403 · Cited by 119
Recent Strategies in Extrusion-Based Three-Dimensional Cell Printing toward Organ Biofabrication
Gao, G., Kim, B. S., Jang, J., & Cho, D. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00691 · Cited by 114
Quantitative optimization of solid freeform deposition of aqueous hydrogels
Kang, K. H., Hockaday, L. A., & Butcher, J. T. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035001 · Cited by 112
Ahn, S., Lee, H., Bonassar, L. J., & Kim, G. (2012) · Biomacromolecules · doi:10.1021/bm3011352 · Cited by 112
Naghieh, S., Sarker, M. D., Abelseth, E., & Chen, D. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.02.014 · Cited by 111
Self-citationDesign and 3D Printing of Hydrogel Scaffolds with Fractal Geometries
Warner, J., Soman, P., Zhu, W. Z., Tom, M., & Chen, S. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00140 · Cited by 109
Sarker, M., Izadifar, M., Schreyer, D., & Chen, X. (2018) · Journal of Biomaterials Science, Polymer Edition · doi:10.1080/09205063.2018.1433420 · Cited by 109
Self-citationBioinspired 3D printable pectin-nanocellulose ink formulations
Cernencu, A. I., Lungu, A., Stancu, I., Serafim, A., Heggset, E. B., Syverud, K., & Iovu, H. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.05.026 · Cited by 109
Matyash, M., Despang, F., Mandal, R., Fiore, D., Gelinsky, M., & Ikonomidou, C. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0097 · Cited by 108
Liu, X., Carter, S. D., Renes, M. J., Kim, J., Rojas‐Canales, D. M., Penko, D., Angus, C., Beirne, S., Drogemuller, C., Yue, Z., et al. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801181 · Cited by 105
Pérez, R. A., Kim, M., Kim, T.-H., Kim, J.-H., Lee, J. H., Park, J.-H., Knowles, J. C., & Kim, H. (2013) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0198 · Cited by 98
Phase Behavior and Rheological Properties of Polyelectrolyte Inks for Direct-Write Assembly
Gratson, G. M., & Lewis, J. A. (2004) · Langmuir · doi:10.1021/la048228d · Cited by 97
The crosstalk of hyaluronan-based extracellular matrix and synapses
Frischknecht, R., & Seidenbecher, C. I. (2008) · Neuron Glia Biology · doi:10.1017/s1740925x09990226 · Cited by 97
Cell(MC3T3‐E1)‐Printed Poly( ϵ ‐caprolactone)/Alginate Hybrid Scaffolds for Tissue Regeneration
Lee, H., Ahn, S., Bonassar, L. J., & Kim, G. (2012) · Macromolecular Rapid Communications · doi:10.1002/marc.201200524 · Cited by 97
Lee, J. W., Ahn, G., Kim, J. Y., & Cho, D. (2010) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-010-4173-7 · Cited by 96
Alginate Composition Effects on a Neural Stem Cell–Seeded Scaffold
Purcell, E. K., Singh, A., & Kipke, D. R. (2009) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2008.0302 · Cited by 95
Water-based 3D inkjet printing of an oral pharmaceutical dosage form
Cader, H. K., Rance, G. A., Alexander, M. R., Gonçalves, A. D., Roberts, C. J., Tuck, C. J., & Wildman, R. D. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.04.026 · Cited by 95
Rheological Behavior of Fugitive Organic Inks for Direct-Write Assembly
Therriault, D., White, S. R., & Lewis, J. A. (2007) · Applied Rheology · doi:10.1515/arh-2007-0001 · Cited by 94
Dynamic Hydrogels and Polymers as Inks for Three-Dimensional Printing
Heidarian, P., Kouzani, A. Z., Kaynak, A., Paulino, M., & Nasri‐Nasrabadi, B. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00047 · Cited by 92
Luo, Y., Lode, A., Akkineni, A. R., & Gelinsky, M. (2015) · RSC Advances · doi:10.1039/c5ra04308e · Cited by 91
Tan, E. Y. S., & Yeong, W. Y. (2015) · International Journal of Bioprinting · doi:10.18063/ijb.2015.01.003 · Cited by 85
Planar and Three-Dimensional Printing of Conductive Inks
Ahn, B. Y., Walker, S. B., Slimmer, S. C., Russo, A., Gupta, A., Kranz, S., Duoss, E. B., Malkowski, T. F., & Lewis, J. A. (2011) · Journal of Visualized Experiments · doi:10.3791/3189 · Cited by 72
Naghieh, S., Sarker, M. D., Izadifar, M., & Chen, D. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.11.037 · Cited by 72
Self-citationCutolo, A., Neirinck, B., Lietaert, K., de Formanoir, C., & Hooreweder, B. V. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.07.008 · Cited by 72
Sarker, M. D., Naghieh, S., McInnes, A. D., Ning, L., Schreyer, D. J., & Chen, D. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00045 · Cited by 72
Self-citationVOLCO: A predictive model for 3D printed microarchitecture
Gleadall, A., Ashcroft, I., & Segal, J. I. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.04.004 · Cited by 69
Open-source three-dimensional printing of biodegradable polymer scaffolds for tissue engineering
Trachtenberg, J. E., Mountziaris, P. M., Miller, J. S., Wettergreen, M. A., Kasper, F. K., & Mikos, A. G. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35108 · Cited by 68
Effect of calcium alginate concentration on viability and proliferation of encapsulated fibroblasts
Bohari, S. P. M., Hukins, D. W. L., & Grover, L. M. (2011) · Bio-Medical Materials and Engineering · doi:10.3233/bme-2011-0665 · Cited by 66
Modeling of Flow Rate, Pore Size, and Porosity for the Dispensing-Based Tissue Scaffolds Fabrication
Li, M. G., Tian, X. Y., & Chen, D. (2009) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.3123331 · Cited by 60
Study of extrudability and standoff distance effect during nanoclay-enabled direct printing
Jin, Y., Zhao, D., & Huang, Y. H. (2018) · Bio-Design and Manufacturing · doi:10.1007/s42242-018-0009-y · Cited by 60
Effects of Fluid Properties on Dispensing Processes for Electronics Packaging
Chen, D., & Ke, H. (2006) · IEEE Transactions on Electronics Packaging Manufacturing · doi:10.1109/tepm.2006.874964 · Cited by 57
Houben, A., Hoorick, J. V., Erps, J. V., Hugo Thienpont, A., Vlierberghe, S. V., & Dubruel, P. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1610-x · Cited by 57
Ahn, S. H., Lee, H. J., Lee, J., Yoon, H. Y., Chun, W., & Kim, G. (2015) · Scientific Reports · doi:10.1038/srep13427 · Cited by 56
Ruiz‐Cantu, L., Gleadall, A., Faris, C., Segal, J. I., Shakesheff, K. M., & Yang, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015016 · Cited by 54
3D Hybrid Bioprinting of Macrovascular Structures
Küçükgül, C., Özler, S. B., Schüller, H. E. K., Gözüaçık, D., & Koç, B. (2013) · Procedia Engineering · doi:10.1016/j.proeng.2013.05.109 · Cited by 45
Aljohani, W., Ullah, M. W., Li, W., Shi, L., Zhang, X., & Yang, G. (2018) · Journal of Polymer Research · doi:10.1007/s10965-018-1455-0 · Cited by 43
A Guiding Framework for Microextrusion Additive Manufacturing
Udofia, E. N., & Zhou, W. (2019) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4042607 · Cited by 43
A review on the challenges of 3D printing of organic powders
Whyte, D. J., Rajkhowa, R., Allardyce, B. J., & Kouzani, A. Z. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00057 · Cited by 39
The in situ synthesis of conductive polyaniline patterns using micro-reactive inkjet printing
Teo, M. Y., Stuart, L., Devaraj, H., Liu, C. Y., Aw, K. C., & Stringer, J. (2019) · Journal of Materials Chemistry C · doi:10.1039/c8tc06485g · Cited by 28
Rhiner, C., & Hengartner, M. O. (2006) · The Scientific World JOURNAL · doi:10.1100/tsw.2006.202 · Cited by 27
Indirect Rapid Prototyping for Tissue Engineering
Maria, C. D., Acutis, A. D., & Vozzi, G. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800972-7.00008-6 · Cited by 12
Patterning catalyst via inkjet printing to grow single-walled carbon nanotubes
Zhang, Z., Li, Y., Zhu, S., Liu, X., Zhao, X., Li, M., Li, H., Yang, F. L., & Li, Y. (2018) · Chinese Chemical Letters · doi:10.1016/j.cclet.2018.06.008 · Cited by 6
Cited by
Biomaterials / bioinks and extrusion bioprinting
Chen, X. B., Fazel Anvari-Yazdi, A., Duan, X., Zimmerling, A., Gharraei, R., Sharma, N. K., Sweilem, S., & Ning, L. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.06.006 · Cited by 244
Bom, S., Ribeiro, R., Ribeiro, H. M., Santos, C., & Marto, J. (2022) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2022.121506 · Cited by 230
Salehi, S., Ghomi, H., Hassanzadeh-Tabrizi, S. A., Koupaei, N., & Khodaei, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.09.027 · Cited by 57
In situ 3D bioprinting: a promising technique in advanced biofabrication strategies
Mahmoudi, Z., Sedighi, M., Jafari, A., Naghieh, S., Stefanek, E., Akbari, M., & Savoji, H. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00260 · Cited by 38
Self-citation
Metadata
- Authors
- Naghieh, S., & Chen, X.
- Venue
- Journal of Pharmaceutical Analysis
- Publisher
- Elsevier BV
- Published
- 2021-10
- Volume
- 11
- Issue
- 5
- Pages
- 564-579
- ISSN
- 2095-1779 (ISSN-L)
- OpenAlex
- W3127814007
- Cited by
- 270
- References
- 105
- FWCI
- 11.27
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.