The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
Abstract
Lithium metal is considered to be the most promising anode for next-generation batteries due to its high energy density of 3840 mAh g(-1). However, the extreme reactivity of the Li surface can induce parasitic reactions with solvents, contamination, and shuttled active species in the electrolyte, reducing the performance of batteries employing Li metal anodes. One promising solution to this issue is application of thin chemical protection layers to the Li metal surface. Using a custom-made ultrahigh vacuum integrated deposition and characterization system, we demonstrate atomic layer deposition (ALD) of protection layers directly on Li metal with exquisite thickness control. We demonstrate as a proof-of-concept that a 14 nm thick ALD Al2O3 layer can protect the Li surface from corrosion due to atmosphere, sulfur, and electrolyte exposure. Using Li-S battery cells as a test system, we demonstrate an improved capacity retention using ALD-protected anodes over cells assembled with bare Li metal anodes for up to 100 cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Atomic Layer Deposition: An Overview
George, S. M. (2010) · Chemical Reviews · doi:10.1021/cr900056b · Cited by 5,814
A Reversible and Higher-Rate Li-O 2 Battery
Peng, Z., Freunberger, S. A., Chen, Y., & Bruce, P. G. (2012) · Science · doi:10.1126/science.1223985 · Cited by 1,915
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Self-citationCapacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries
Arora, P., White, R. E., & Doyle, M. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838857 · Cited by 1,408
Elazari, R., Salitra, G., Garsuch, A., Panchenko, A., & Aurbach, D. (2011) · Advanced Materials · doi:10.1002/adma.201103274 · Cited by 895
Design of electrolyte solutions for Li and Li-ion batteries: a review
Aurbach, D., Talyosef, Y., Markovsky, B., Markevich, E., Zinigrad, E., Asraf, L., Gnanaraj, J. S., & Kim, H.-J. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.01.090 · Cited by 682
Zhou, G., Zhao, Y., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402263 · Cited by 502
Lithium Sulfur Battery: Oxidation/Reduction Mechanisms of Polysulfides in THF Solutions
Yamin, H., Gorenshtein, A., Penciner, J., Sternberg, Y., & Peled, E. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095868 · Cited by 471
Quantifying the promise of lithium–air batteries for electric vehicles
Gallagher, K. G., Goebel, S., Greszler, T., Mathias, M., Oelerich, W., Eroglu, D., & Srinivasan, V. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43870h · Cited by 460
Fluorinated Carbonyl and Olefinic Compounds: Basic Character and Asymmetric Catalytic Reactions
Mikami, K., Itoh, Y., & Yamanaka, M. (2003) · Chemical Reviews · doi:10.1021/cr030685w · Cited by 437
Cited by
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Design principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal
Pei, A., Zheng, G., Shi, F., Li, Y., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04755 · Cited by 1,726
Promises and challenges of nanomaterials for lithium-based rechargeable batteries
Sun, Y., Liu, N., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.71 · Cited by 1,703
Advancing Lithium Metal Batteries
Liu, B., Zhang, J.-G., & Xu, W. (2018) · Joule · doi:10.1016/j.joule.2018.03.008 · Cited by 1,647
Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries
Wang, A., Kadam, S., Li, H., Shi, S., & Qi, Y. (2018) · npj Computational Materials · doi:10.1038/s41524-018-0064-0 · Cited by 1,639
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
A facile surface chemistry route to a stabilized lithium metal anode
Liang, X., Pang, Q., Kochetkov, I. R., Sempere, M. S., Huang, H., Sun, X., & Nazar, L. F. (2017) · Nature Energy · doi:10.1038/nenergy.2017.119 · Cited by 1,083
Lithium–Oxygen Batteries and Related Systems: Potential, Status, and Future
Kwak, W.-J., Rosy, Sharon, D., Xia, C., Kim, H., Johnson, L. R., Bruce, P. G., Nazar, L. F., Sun, Y.-K., Frimer, A. A., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00609 · Cited by 1,009
Self-citationLiu, Y., Lin, D., Yuen, P. Y., Liu, K., Xie, J., Dauskardt, R. H., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605531 · Cited by 990
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
Self-citationLithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
Electrode Degradation in Lithium-Ion Batteries
Pender, J. P., Jha, G., Youn, D. H., Ziegler, J. M., Andoni, I., Choi, E. J., Heller, A., Dunn, B. S., Weiss, P. S., Penner, R. M., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b04365 · Cited by 873
Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes
Yun, Q., He, Y., Lv, W., Zhao, Y., Li, B., Kang, F., & Yang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201601409 · Cited by 870
Lithium Batteries and the Solid Electrolyte Interphase (SEI)—Progress and Outlook
Adenusi, H., Chass, G. A., Passerini, S., Tian, K. V., & Chen, G. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202203307 · Cited by 830
2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li–S batteries
Cha, E., Patel, M. D., Park, J., Hwang, J., Prasad, V., Cho, K., & Choi, W. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0061-y · Cited by 767
Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid
Yang, C., Fu, K., Zhang, Y., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201701169 · Cited by 757
Self-citationLithium Metal Anodes with Nonaqueous Electrolytes
Zhang, J.-G., Xu, W., Xiao, J., Cao, X., & Liu, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00275 · Cited by 730
Artificial Interphases for Highly Stable Lithium Metal Anode
Xu, R., Cheng, X.-B., Yan, C., Zhang, X.-Q., Xiao, Y., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2019) · Matter · doi:10.1016/j.matt.2019.05.016 · Cited by 721
High-Performance Anode Materials for Rechargeable Lithium-Ion Batteries
Lu, J., Chen, Z., Pan, F., Cui, Y., & Amine, K. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0001-4 · Cited by 695
Sulfide Solid Electrolytes for Lithium Battery Applications
Lau, J., DeBlock, R. H., Butts, D. M., Ashby, D. S., Choi, C. S., & Dunn, B. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800933 · Cited by 678
Beyond lithium ion batteries: Higher energy density battery systems based on lithium metal anodes
Shen, X., Liu, H., Cheng, X.-B., Yan, C., & Huang, J.-Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.002 · Cited by 653
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Lithium Metal Anodes with an Adaptive “Solid-Liquid” Interfacial Protective Layer
Liu, K., Pei, A., Lee, H. R., Kong, B., Liu, N., Lin, D., Liu, Y., Liu, C., Hsu, P.-C., Bao, Z., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b13314 · Cited by 560
Wood, K. N., Noked, M., & Dasgupta, N. P. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00650 · Cited by 558
Self-citationRecent developments and insights into the understanding of Na metal anodes for Na-metal batteries
Zhao, Y., Adair, K. R., & Sun, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01373j · Cited by 533
He, H., Tong, H., Song, X., Song, X., & Liu, J. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta00748j · Cited by 512
Conformality in atomic layer deposition: Current status overview of analysis and modelling
Cremers, V., Puurunen, R. L., & Dendooven, J. (2019) · Applied Physics Reviews · doi:10.1063/1.5060967 · Cited by 508
Understanding undesirable anode lithium plating issues in lithium-ion batteries
Liu, Q., Du, C., Shen, B., Zuo, P., Cheng, X., Ma, Y., Yin, G., & Gao, Y. (2016) · RSC Advances · doi:10.1039/c6ra19482f · Cited by 473
Air-stable and freestanding lithium alloy/graphene foil as an alternative to lithium metal anodes
Zhao, J., Zhou, G., Yan, K., Xie, J., Li, Y., Liao, L., Jin, Y., Liu, K., Hsu, P.-C., Wang, J., et al. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.129 · Cited by 468
Zheng, J., Kim, M. S., Tu, Z., Choudhury, S., Tang, T., & Archer, L. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00883g · Cited by 466
Lin, D., Liu, Y., Chen, W., Zhou, G., Liu, K., Dunn, B., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01020 · Cited by 465
Zeng, X.-X., Yin, Y.-X., Li, N.-W., Du, W.-C., Guo, Y.-G., & Wan, L.-J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10088 · Cited by 459
Key Issues Hindering a Practical Lithium-Metal Anode
Fang, C., Wang, X., & Meng, Y. S. (2019) · Trends in Chemistry · doi:10.1016/j.trechm.2019.02.015 · Cited by 459
Design strategies for nonaqueous multivalent-ion and monovalent-ion battery anodes
Li, M., Lu, J., Ji, X., Li, Y., Shao, Y., Chen, Z., Zhong, C., & Amine, K. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0166-4 · Cited by 438
Zhao, H., Lei, D., He, Y., Yuan, Y., Yun, Q., Ni, B., Lv, W., Li, B., Yang, Q., Kang, F., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800266 · Cited by 431
Wang, C., Yang, Y., Liu, X., Zhong, H., Xu, H., Xu, Z., Shao, H., & Ding, F. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00336 · Cited by 419
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0010-3 · Cited by 411
Zhou, D., Liu, R., He, Y., Li, F., Liu, M., Li, B., Yang, Q., Cai, Q., & Kang, F. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502214 · Cited by 408
Li-S Batteries: Challenges, Achievements and Opportunities
Raza, H., Bai, S., Cheng, J., Majumder, S., Zhu, H., Liu, Q., Zheng, G., Li, X., & Chen, G. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00188-4 · Cited by 406
Lithium anode stable in air for low-cost fabrication of a dendrite-free lithium battery
Shen, X., Li, Y., Qian, T., Liu, J., Zhou, J., Yan, C., & Goodenough, J. B. (2019) · Nature Communications · doi:10.1038/s41467-019-08767-0 · Cited by 386
Li, C., Liu, S., Shi, C., Liang, G., Lu, Z., Fu, R., & Wu, D. (2019) · Nature Communications · doi:10.1038/s41467-019-09211-z · Cited by 384
Key Aspects of Lithium Metal Anodes for Lithium Metal Batteries
Ghazi, Z. A., Sun, Z., Sun, C., Qi, F., An, B., Li, F., & Cheng, H. (2019) · Small · doi:10.1002/smll.201900687 · Cited by 382
Interface Engineering for Lithium Metal Anodes in Liquid Electrolyte
Zhai, P., Liu, L., Gu, X., Wang, T., & Gong, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001257 · Cited by 380
A robust all-organic protective layer towards ultrahigh-rate and large-capacity Li metal anodes
Li, S., Huang, J., Cui, Y., Liu, S., Chen, Z., Huang, W., Li, C., Liu, R., Fu, R., & Wu, D. (2022) · Nature Nanotechnology · doi:10.1038/s41565-022-01107-2 · Cited by 380
Superior Stable and Long Life Sodium Metal Anodes Achieved by Atomic Layer Deposition
Zhao, Y., Goncharova, L. V., Lushington, A., Sun, Q., Yadegari, H., Wang, B., Xiao, W., Li, R., & Sun, X. (2017) · Advanced Materials · doi:10.1002/adma.201606663 · Cited by 366
A Thermally Conductive Separator for Stable Li Metal Anodes
Luo, W., Zhou, L., Fu, K., Yang, Z., Wan, J., Manno, M., Yao, Y., Zhu, H., Yang, B., & Hu, L. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02432 · Cited by 356
Self-citationKazyak, E., Wood, K. N., & Dasgupta, N. P. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02789 · Cited by 356
Designable ultra-smooth ultra-thin solid-electrolyte interphases of three alkali metal anodes
Gu, Y., Wang, W.-W., Li, Y.-J., Wu, Q.-H., Tang, S., Yan, J.-W., Zheng, M.-S., Wu, D.-Y., Fan, C.-H., Hu, W.-Q., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03466-8 · Cited by 355
Lithium Metal Batteries Enabled by Synergetic Additives in Commercial Carbonate Electrolytes
Piao, N., Liu, S., Zhang, B., Ji, X., Fan, X., Wang, L., Wang, P.-F., Jin, T., Liou, S.-C., Yang, H., et al. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00365 · Cited by 355
Self-citationGunnarsdóttir, A. B., Amanchukwu, C. V., Menkin, S., & Grey, C. P. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c10258 · Cited by 326
Design of Complex Nanomaterials for Energy Storage: Past Success and Future Opportunity
Liu, Y., Zhou, G., Liu, K., & Cui, Y. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00450 · Cited by 323
Interface engineering toward stable lithium–sulfur batteries
Guo, Y., Niu, Q., Pei, F., Wang, Q., Zhang, Y., Du, L., Zhang, Y., Zhang, Y., Zhang, Y., Fan, L., et al. (2024) · Energy & Environmental Science · doi:10.1039/d3ee04183b · Cited by 322
Zou, P., Wang, Y., Chiang, S.-W., Wang, X., Kang, F., & Yang, C. (2018) · Nature Communications · doi:10.1038/s41467-018-02888-8 · Cited by 319
Recent advances in understanding Li–CO2 electrochemistry
Liu, B., Sun, Y., Liu, L., Chen, J., Yang, B., Xu, S., & Yan, X. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03417f · Cited by 317
Understanding and suppression strategies toward stable Li metal anode for safe lithium batteries
Yasin, G., Arif, M., Mehtab, T., Lu, X., Yu, D., Muhammad, N., Nazir, M. T., & Song, H. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.09.020 · Cited by 317
Ionic liquids for high performance lithium metal batteries
Liu, K., Wang, Z., Shi, L., Jungsuttiwong, S., & Yuan, S. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.11.017 · Cited by 317
Revitalized interest in vanadium pentoxide as cathode material for lithium-ion batteries and beyond
Yao, J., Li, Y., Massé, R. C., Uchaker, E., & Cao, G. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.10.014 · Cited by 313
Stabilizing the Interface of NASICON Solid Electrolyte against Li Metal with Atomic Layer Deposition
Liu, Y., Sun, Q., Zhao, Y., Wang, B., Kaghazchi, P., Adair, K. R., Li, R., Zhang, C., Liu, J., Kuo, L.-Y., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06366 · Cited by 312
Graphite-Encapsulated Li-Metal Hybrid Anodes for High-Capacity Li Batteries
Sun, Y., Zheng, G., Seh, Z. W., Liu, N., Wang, S., Sun, J., Lee, H. R., & Cui, Y. (2016) · Chem · doi:10.1016/j.chempr.2016.07.009 · Cited by 305
Electrolytes for electrochemical energy storage
Xia, L., Yu, L., Hu, D., & Chen, G. Z. (2017) · Materials Chemistry Frontiers · doi:10.1039/c6qm00169f · Cited by 305
Anode Improvement in Rechargeable Lithium–Sulfur Batteries
Tao, T., Lu, S., Fan, Y., Lei, W., Huang, S., & Chen, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700542 · Cited by 304
Zhao, Y., Zheng, K., & Sun, X. (2018) · Joule · doi:10.1016/j.joule.2018.11.012 · Cited by 288
Advances in Interfaces between Li Metal Anode and Electrolyte
Zhang, X., Cheng, X., & Zhang, Q. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701097 · Cited by 287
Inorganic–Organic Coating via Molecular Layer Deposition Enables Long Life Sodium Metal Anode
Zhao, Y., Goncharova, L. V., Zhang, Q., Kaghazchi, P., Sun, Q., Lushington, A., Wang, B., Li, R., & Sun, X. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02464 · Cited by 284
Alkali Metal Anodes for Rechargeable Batteries
Wang, H., Yu, D., Kuang, C., Cheng, L., Li, W., Feng, X., Zhang, Z., Zhang, X., & Zhang, Y. (2019) · Chem · doi:10.1016/j.chempr.2018.11.005 · Cited by 266
Lithium Fluoride in Electrolyte for Stable and Safe Lithium‐Metal Batteries
Tan, Y., Lu, G., Zheng, J., Zhou, F., Chen, M., Ma, T., Lu, L., Song, Y., Guan, Y., Wang, J., et al. (2021) · Advanced Materials · doi:10.1002/adma.202102134 · Cited by 259
Vacuum distillation derived 3D porous current collector for stable lithium–metal batteries
An, Y., Fei, H., Zeng, G., Xu, X., Ci, L., Xi, B., Xiong, S., Feng, J., & Qian, Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.03.036 · Cited by 258
Metadata
- Authors
- Kozen, A. C., Lin, C.-F., Pearse, A. J., Schroeder, M. A., Han, X., Hu, L., Lee, S.-B., Rubloff, G. W., & Noked, M.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-05-21
- Volume
- 9
- Issue
- 6
- Pages
- 5884-5892
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2217159267
- Cited by
- 816
- References
- 23
- FWCI
- 38.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.