CoChat

Shape-Memory Polymer Nanocomposites of Poly(ε-caprolactone) with the Polystyrene-block-polybutadiene-block-polystyrene-tri-block Copolymer Encapsulated with Metal Oxides

Open access

The DOI matches its Crossref record; 74 of the 76 references it cites were found in a registry or an index, and 1 are not checked yet; 4 of the 32 sources its claims cite were checked for support.

Abstract

Shape-memory polymer composite blends derived from PCL and SBS were characterized for morphological, thermal, mechanical, and shape-memory properties; addition of nano-metal-oxide fillers improved overall properties and the work developed a microvalve actuator system.

Verified 2026-11-19 · 1 reference not checked yet

Overview

CoChat Summary

TL;DR

The paper reports thermo-responsive shape-memory polymer composites (SMPCs) made from poly(ε-caprolactone) (PCL) and polystyrene-block-polybutadiene-block-polystyrene (SBS) with CuO, Fe2O3, or CuFe2O4 nanofillers. SMPC–Fe2O3 showed the best overall thermal, mechanical, and shape-memory performance, and was used to demonstrate a microvalve actuator.

Key findings

  • SMP and SMPCs were prepared from equal SBS/PCL ratios with 0.2 parts metal-oxide filler; the fillers improved overall properties, and SMPC–CuFe2O4 had the highest tensile modulus and was very rigid/brittle, while neat SMP was more elastic with low Young’s modulus.
  • Shape recovery ratio (Rr) was high and equal for SMPC–Fe2O3 and SMPC–CuO at 91.6%, with the order SMPC–Fe2O3 ≥ SMPC–CuO > SMP > SMPC–CuFe2O4; shape fixing increased as SMPC–CuO > SMPC–Fe2O3 > SMP > SMPC–CuFe2O4.
  • SMPC–Fe2O3 showed the better thermal, mechanical, and shape-memory performances and attained the optimum storage modulus among the SMPCs; a microvalve actuator system was demonstrated using SMPC–Fe2O3.
  • DSC showed Tm at 63 °C for SMP and 64 °C for metal-oxide-reinforced SMPCs; the paper reports Tg above −70 °C and crystallization temperature at 40 °C.

Methods

  • Composites were synthesized by melt blending SBS, PCL, and nano-metal-oxide fillers in a Hakke mixer at 180 °C and 60 rpm for 7 min, then hot-pressed at 180 °C and 5 kg N/m² to 2.5 mm films.
  • Characterization included FT-IR, UV–vis, XRD, TGA/DTG coupled with GC–MS, DSC, POM, SEM, AFM, tensile testing, DMA, and thermo-active shape-memory testing by the fold-deploy method.
  • Tensile and shape-memory plots report standard deviation with n = 5; DMA used rectangular specimens 60 mm × 4 mm × 2 mm at 1 Hz from −100 to +100 °C; shape-memory samples were 100 × 10 × 3 mm.

Limitations

  • The paper does not state limitations.
  • Evident from the text: some morphological and thermal data are referenced to supplementary Figures S1 and S2, which are not included in the provided text.
  • Evident from the text: the actuator demonstration is qualitative, and the paper reports no cycling/fatigue or long-term stability testing for the shape-memory composites.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1021/acsomega.0c05839

Cites

74 of 75 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Scheme 1 Schematic View of the Synthesis of SMPNCs Built from SBS, PCL, and Nano-Metal Oxides
Scheme 1 Schematic View of the Synthesis of SMPNCs Built from SBS, PCL, and Nano-Metal OxidesCC BY-NC-ND · PubMed Central
Figure 1 FT-IR spectrum of various SMPNCs.
Figure 1 FT-IR spectrum of various SMPNCs.CC BY-NC-ND · PubMed Central
Figure 2 UV spectrum of various SMPNCs.
Figure 2 UV spectrum of various SMPNCs.CC BY-NC-ND · PubMed Central
Figure 3 XRD spectrum of various SMPCs.
Figure 3 XRD spectrum of various SMPCs.CC BY-NC-ND · PubMed Central
Figure 4 (a) TGA and (b) DTG curves of different samples.
Figure 4 (a) TGA and (b) DTG curves of different samples.CC BY-NC-ND · PubMed Central
Figure 5 MS plots of different samples: (a) SMP, (b) SMPC–CuO, (c) SMPC–Fe2O3, and (d) SMPC–CuFe2O4.
Figure 5 MS plots of different samples: (a) SMP, (b) SMPC–CuO, (c) SMPC–Fe2O3, and (d) SMPC–CuFe2O4.CC BY-NC-ND · PubMed Central
Scheme 2 (a) Possible Pyrolysis Mechanism of PCL and (b) SBS
Scheme 2 (a) Possible Pyrolysis Mechanism of PCL and (b) SBSCC BY-NC-ND · PubMed Central
Figure 6 SEM images of various SMPNCs.
Figure 6 SEM images of various SMPNCs.CC BY-NC-ND · PubMed Central
Figure 7 AFM images of (a) SMP, (b) SMPC–CuO, (c) SMPC–Fe2O3, and (d) SMPC–CuFe2O4.
Figure 7 AFM images of (a) SMP, (b) SMPC–CuO, (c) SMPC–Fe2O3, and (d) SMPC–CuFe2O4.CC BY-NC-ND · PubMed Central
Figure 8 (a) Stress–strain curve; (b) bar diagram for break stress and yield stress of various composite samples. The error bars in the graph represent the standard deviation (n = 5).
Figure 8 (a) Stress–strain curve; (b) bar diagram for break stress and yield stress of various composite samples. The error bars in the graph represent the standard deviation (n = 5).CC BY-NC-ND · PubMed Central
Figure 9 Thermo-responsive shape-memory effect of various samples.
Figure 9 Thermo-responsive shape-memory effect of various samples.CC BY-NC-ND · PubMed Central
Figure 10 (a) Comparison of thermal shape recovery of various composite samples using thermal shape recovery stages Rr and Rf. (b) Thermal shape-memory analysis using the recovery time of various composite samples. The error bars in the graph represent the standard deviation (n = 5).
Figure 10 (a) Comparison of thermal shape recovery of various composite samples using thermal shape recovery stages Rr and Rf. (b) Thermal shape-memory analysis using the recovery time of various composite samples. The error bars in the graph represent the standard deviation (n = 5).CC BY-NC-ND · PubMed Central
Figure 11 (a) Storage modulus of various composite samples. (b) Loss modulus of various composite samples. (c) Tan δ of various composite samples.
Figure 11 (a) Storage modulus of various composite samples. (b) Loss modulus of various composite samples. (c) Tan δ of various composite samples.CC BY-NC-ND · PubMed Central
Figure 12 Actuator application of the synthesized SMPC in microsystems: (12a,12c) cooled state and (12b,12d) heated stage.
Figure 12 Actuator application of the synthesized SMPC in microsystems: (12a,12c) cooled state and (12b,12d) heated stage.CC BY-NC-ND · PubMed Central
Figure 13 Shape-memory model.
Figure 13 Shape-memory model.CC BY-NC-ND · PubMed Central

Verification

Claims the paper makes

3 Valid · 0 Not valid · 11 Not checked · 85 Own results and interpretations

52 more claims

Create a free account to see all 99 claims and to verify the 1 reference still open.

See all claims — free account
  • Probably not a substantial claim. 15
  • It may state two separate claims as one. 30

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

3 of 3

Citations

Cites

Research works printed but not linked: 2

  1. 10.1002/1521-3773(20020617)41:12<2034::aid-anie2034>3.0.co;2-m · doi:10.1002/1521-3773(20020617)41:12<2034::aid-anie2034>3.0.co;2-m
  2. Al-Humairi S. N., 2019, InSmart and Functional Soft Materials;, 23

Metadata

Authors
Gopinath, S., Adarsh, N. N., Nair, P. R., & Mathew, S.
Affiliations
Mahatma Gandhi University (IN)
Corresponding author
Mathew, Suresh
Venue
ACS Omega
Published
2021-02-22
Volume
6
Issue
9
Pages
6261-6273
ISSN
2470-1343 (ISSN-L)
OpenAlex
W3130479042
Cited by
39
References
76
Citations by year
2026: 2 · 2025: 8 · 2024: 11 · 2023: 7 · 2022: 9 · 2021: 2
FWCI
3.10
Type
journal article
Language
en
Open access
Locations
  • ACS Omega (publishedVersion, cc-by-nc-nd)
  • PubMed Central (publishedVersion, cc-by-nc-nd)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
Mahatma Gandhi University
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
  • Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
Keywords
shape memory polymers, polycaprolactone, nanocomposites, triblock copolymers, microsystems

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.