The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Highly compressible 3D periodic graphene aerogel microlattices
Open accessAbstract
Graphene is a two-dimensional material that offers a unique combination of low density, exceptional mechanical properties, large surface area and excellent electrical conductivity. Recent progress has produced bulk 3D assemblies of graphene, such as graphene aerogels, but they possess purely stochastic porous networks, which limit their performance compared with the potential of an engineered architecture. Here we report the fabrication of periodic graphene aerogel microlattices, possessing an engineered architecture via a 3D printing technique known as direct ink writing. The 3D printed graphene aerogels are lightweight, highly conductive and exhibit supercompressibility (up to 90% compressive strain). Moreover, the Young’s moduli of the 3D printed graphene aerogels show an order of magnitude improvement over bulk graphene materials with comparable geometric density and possess large surface areas. Adapting the 3D printing technique to graphene aerogels realizes the possibility of fabricating a myriad of complex aerogel architectures for a broad range of applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Graphene: Status and Prospects
Geim, A. K. (2009) · Science · doi:10.1126/science.1158877 · Cited by 13,942
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Oliver, W. C., & Pharr, G. M. (2004) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2004.0002 · Cited by 8,190
Detection of individual gas molecules adsorbed on graphene
Schedin, F., Geim, A. K., Morozov, S. V., Hill, E. W., Blake, P., Katsnelson, M. I., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1967 · Cited by 8,028
Transparent, Conductive Graphene Electrodes for Dye-Sensitized Solar Cells
Wang, X., Zhi, L., & Müllen, K. (2008) · Nano Letters · doi:10.1021/nl072838r · Cited by 4,467
Research works printed but not linked: 2
- Zhu, C. & Smay, J. E. Thixotropic rheology of concentrated alumina colloidal gels for solid freeform fabrication. J. Rheol. 55, 655–672 (2011). · doi:10.1122/1.3573828
- Kan, Q., Yan, W., Kang, G. & Sun, Q. Oliver-Pharr indentation method in determining elastic moduli of shape memory alloys—a phase transformable material. J. Mech. Phys. Solids 61, 2015–2033 (2013). · doi:10.1016/j.jmps.2013.05.007
Cited by
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Mechanical metamaterials associated with stiffness, rigidity and compressibility: A brief review
Yu, X., Zhou, J., Liang, H., Jiang, Z., & Wu, L. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.12.003 · Cited by 1,140
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
Laser‐Induced Graphene: From Discovery to Translation
Ye, R., James, D. K., & Tour, J. M. (2019) · Advanced Materials · doi:10.1002/adma.201803621 · Cited by 942
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Graphene aerogels for efficient energy storage and conversion
Mao, J., Iocozzia, J., Huang, J., Meng, K., Lai, Y., & Lin, Z. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03031b · Cited by 868
Graphene research and their outputs: Status and prospect
Tiwari, S. K., Sahoo, S., Wang, N., & Huczko, A. (2020) · Journal of Science: Advanced Materials and Devices · doi:10.1016/j.jsamd.2020.01.006 · Cited by 817
Hierarchical 3D electrodes for electrochemical energy storage
Sun, H., Zhu, J., Baumann, D., Peng, L., Xu, Y., Shakir, I., Huang, Y., & Duan, X. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0069-9 · Cited by 805
Yang, Z., Tian, J., Yin, Z., Cui, C., Qian, W., & Wei, F. (2019) · Carbon · doi:10.1016/j.carbon.2018.10.010 · Cited by 790
Highly Self-Healable 3D Microsupercapacitor with MXene–Graphene Composite Aerogel
Yue, Y., Liu, N., Ma, Y., Wang, S., Liu, W., Luo, C., Zhang, H., Cheng, F., Rao, J., Hu, X., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07528 · Cited by 736
Graphene-based materials for tissue engineering
Shin, S. R., Li, Y.-C., Jang, H. L., Khoshakhlagh, P., Akbari, M., Nasajpour, A., Zhang, Y. S., Tamayol, A., & Khademhosseini, A. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.007 · Cited by 721
Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
Zhu, C., Liu, T., Qian, F., Han, T. Y.-J., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04965 · Cited by 720
Self-citationLi, Y., Gao, T., Yang, Z., Chen, C., Luo, W., Song, J., Hitz, E., Jia, C., Zhou, Y., Liu, B., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700981 · Cited by 720
Additive manufacturing of silica aerogels
Zhao, S., Siqueira, G., Drdova, S., Norris, D., Ubert, C., Bonnin, A., Galmarini, S., Ganobjak, M., Pan, Z., Brunner, S., et al. (2020) · Nature · doi:10.1038/s41586-020-2594-0 · Cited by 676
Si, Y., Wang, X., Dou, L., Yu, J., & Ding, B. (2018) · Science Advances · doi:10.1126/sciadv.aas8925 · Cited by 673
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Advances in 3D printing of thermoplastic polymer composites and nanocomposites
Valino, A. D., Dizon, J. R. C., Espera, A. H., Chen, Q., Messman, J., & Advincula, R. C. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101162 · Cited by 565
3D Graphene Materials: From Understanding to Design and Synthesis Control
Sun, Z., Fang, S., & Hu, Y. H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00083 · Cited by 543
Highly Compressible, Anisotropic Aerogel with Aligned Cellulose Nanofibers
Song, J., Chen, C., Yang, Z., Kuang, Y., Li, T., Li, Y., Huang, H., Kierzewski, I., Liu, B., He, S., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b04246 · Cited by 536
Cheng, C., Li, S., Thomas, A., Kotov, N. A., & Haag, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00520 · Cited by 527
Si, Y., Wang, X., Yan, C., Yang, L., Yu, J., & Ding, B. (2016) · Advanced Materials · doi:10.1002/adma.201603143 · Cited by 503
3D printing technologies for electrochemical energy storage
Zhang, F., Wei, M., Viswanathan, V. V., Swart, B., Shao, Y., Wu, G., & Zhou, C. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.037 · Cited by 494
Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO2 Loading
Yao, B., Chandrasekaran, S., Zhang, J., Xiao, W., Qian, F., Zhu, C., Duoss, E. B., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2019) · Joule · doi:10.1016/j.joule.2018.09.020 · Cited by 491
Self-citationProgress in 3D Printing of Carbon Materials for Energy‐Related Applications
Fu, K., Yao, Y., Dai, J., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201603486 · Cited by 475
Low, Z.-X., Chua, Y. T., Ray, B. M., Mattia, D., Metcalfe, I. S., & Patterson, D. A. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.10.006 · Cited by 465
Additive-manufactured (3D-printed) electrochemical sensors: A critical review
Cardoso, R. M., Kalinke, C., Rocha, R. G., dos Santos, P. L., Rocha, D. P., Oliveira, P. R., Janegitz, B. C., Bonacin, J. A., Richter, E. M., & Munoz, R. A. A. (2020) · Analytica Chimica Acta · doi:10.1016/j.aca.2020.03.028 · Cited by 460
Super-elastic and fatigue resistant carbon material with lamellar multi-arch microstructure
Gao, H.-L., Zhu, Y.-B., Mao, L.-B., Wang, F.-C., Luo, X.-S., Liu, Y.-Y., Lu, Y., Pan, Z., Ge, J., Shen, W., et al. (2016) · Nature Communications · doi:10.1038/ncomms12920 · Cited by 455
The mechanics and design of a lightweight three-dimensional graphene assembly
Qin, Z., Jung, G. S., Kang, M. J., & Buehler, M. J. (2017) · Science Advances · doi:10.1126/sciadv.1601536 · Cited by 453
Xu, T., Song, Q., Liu, K., Liu, H., Pan, J., Liu, W., Dai, L., Zhang, M., Wang, Y., Si, C., et al. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01073-x · Cited by 435
Li, Y., Gao, T., Yang, Z., Chen, C., Kuang, Y., Song, J., Jia, C., Hitz, E. M., Yang, B., & Hu, L. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.09.034 · Cited by 416
Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review
Tian, X., Jin, J., Yuan, S., Chua, C. K., Tor, S. B., & Zhou, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700127 · Cited by 407
Pore-scale modeling of complex transport phenomena in porous media
Chen, L., He, A., Zhao, J., Kang, Q., Li, Z.-Y., Carmeliet, J., Shikazono, N., & Tao, W.-Q. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100968 · Cited by 399
Wan, Y., Zhu, P., Yu, S., Sun, R., Wong, C., & Liao, W. (2018) · Small · doi:10.1002/smll.201800534 · Cited by 397
Electroconductive natural polymer-based hydrogels
Shi, Z., Gao, X., Ullah, M. W., Li, S., Wang, Q., & Yang, G. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.020 · Cited by 392
Freeze-Casting Produces a Graphene Oxide Aerogel with a Radial and Centrosymmetric Structure
Wang, C., Chen, X., Wang, B., Huang, M., Wang, B., Jiang, Y., & Ruoff, R. S. (2018) · ACS Nano · doi:10.1021/acsnano.8b01747 · Cited by 392
Biomimetic Architectured Graphene Aerogel with Exceptional Strength and Resilience
Yang, M., Zhao, N., Cui, Y., Gao, W., Zhao, Q., Gao, C., Bai, H., & Xie, T. (2017) · ACS Nano · doi:10.1021/acsnano.7b01815 · Cited by 389
Three-Dimensional Printed Thermal Regulation Textiles
Gao, T., Yang, Z., Chen, C., Li, Y., Fu, K., Dai, J., Hitz, E. M., Xie, H., Liu, B., Song, J., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b06295 · Cited by 378
Min, P., Liu, J., Li, X., An, F., Liu, P., Shen, Y., Koratkar, N., & Yu, Z. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201805365 · Cited by 375
Zhi, D., Li, T., Li, J., Ren, H., & Meng, F. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108642 · Cited by 375
3D‐Printed All‐Fiber Li‐Ion Battery toward Wearable Energy Storage
Wang, Y., Chen, C., Xie, H., Gao, T., Yao, Y., Pastel, G., Han, X., Li, Y., Zhao, J., Fu, K. (., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703140 · Cited by 374
Wearable piezoresistive pressure sensors based on 3D graphene
Cao, M., Su, J., Fan, S., Qiu, H., Su, D., & Li, L. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126777 · Cited by 373
Environmental performance of graphene-based 3D macrostructures
Yousefi, N., Lu, X., Elimelech, M., & Tufenkji, N. (2019) · Nature Nanotechnology · doi:10.1038/s41565-018-0325-6 · Cited by 371
Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices
Jiang, Y., Xu, Z., Huang, T., Liu, Y., Guo, F., Xi, J., Gao, W., & Gao, C. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707024 · Cited by 370
Recent Progress of Polysaccharide‐Based Hydrogel Interfaces for Wound Healing and Tissue Engineering
Zhu, T., Mao, J., Cheng, Y., Liu, H., Lv, L., Ge, M., Li, S., Huang, J., Chen, Z., Li, H., et al. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201900761 · Cited by 370
Mi, H.-Y., Jing, X., Politowicz, A. L., Chen, E., Huang, H.-X., & Turng, L.-S. (2018) · Carbon · doi:10.1016/j.carbon.2018.02.033 · Cited by 362
The Boom in 3D-Printed Sensor Technology
Xu, Y., Wu, X., Guo, X., Kong, B., Zhang, M., Qian, X., Mi, S., & Sun, W. (2017) · Sensors · doi:10.3390/s17051166 · Cited by 361
Recent Advances in Analytical Chemistry by 3D Printing
Gross, B., Lockwood, S. Y., & Spence, D. M. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b04344 · Cited by 359
MXene Aerogel Scaffolds for High‐Rate Lithium Metal Anodes
Zhang, X., Lv, R., Wang, A., Guo, W., Liu, X., & Luo, J. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201808714 · Cited by 354
Zhuo, H., Hu, Y., Tong, X., Chen, Z., Zhong, L., Lai, H., Liu, L., Jing, S., Liu, Q., Liu, C., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706705 · Cited by 336
Ultralight, scalable, and high-temperature–resilient ceramic nanofiber sponges
Wang, H., Zhang, X., Wang, N., Li, Y., Feng, X., Huang, Y., Zhao, C., Liu, Z., Fang, M., Ou, G., et al. (2017) · Science Advances · doi:10.1126/sciadv.1603170 · Cited by 332
Extrusion‐Based 3D Printing of Hierarchically Porous Advanced Battery Electrodes
Lacey, S. D., Kirsch, D. J., Li, Y., Morgenstern, J. T., Zarket, B. C., Yao, Y., Dai, J., Garcia, L. Q., Liu, B., Gao, T., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705651 · Cited by 332
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
Xiao, K., Ding, L., Liu, G., Chen, H., Wang, S., & Wang, H. (2016) · Advanced Materials · doi:10.1002/adma.201601125 · Cited by 324
Lewicki, J. P., Rodriguez, J. N., Zhu, C., Worsley, M. A., Wu, A. S., Kanarska, Y., Horn, J. D., Duoss, E. B., Ortega, J. M., Elmer, W., et al. (2017) · Scientific Reports · doi:10.1038/srep43401 · Cited by 318
Self-citationPrinted aerogels: chemistry, processing, and applications
Feng, J., Su, B.-L., Xia, H., Zhao, S., Gao, C., Wang, L., Ogbeide, O., Feng, J., & Hasan, T. (2021) · Chemical Society Reviews · doi:10.1039/c9cs00757a · Cited by 313
Highly stretchable carbon aerogels
Guo, F., Jiang, Y., Xu, Z., Xiao, Y., Fang, B., Liu, Y., Gao, W., Zhao, P., Wang, H., & Gao, C. (2018) · Nature Communications · doi:10.1038/s41467-018-03268-y · Cited by 313
Paul, R., Du, F., Dai, L., Ding, Y., Wang, Z. L., Wei, F., & Roy, A. (2019) · Advanced Materials · doi:10.1002/adma.201805598 · Cited by 313
Naturally Dried Graphene Aerogels with Superelasticity and Tunable Poisson's Ratio
Xu, X., Zhang, Q., Yu, Y., Chen, W., Hu, H., & Li, H. (2016) · Advanced Materials · doi:10.1002/adma.201603079 · Cited by 301
Ruiz-Morales, J. C., Tarancón, A., Canales-Vázquez, J., Méndez-Ramos, J., Hernández-Afonso, L., Acosta-Mora, P., Marín Rueda, J. R., & Fernández-González, R. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03526d · Cited by 299
Recent Advances in Sensing Applications of Graphene Assemblies and Their Composites
Tung, T. T., Nine, M. J., Krebsz, M., Pasinszki, T., Coghlan, C. J., Tran, D. N. H., & Losic, D. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702891 · Cited by 294
Additive Manufacturing: Unlocking the Evolution of Energy Materials
Zhakeyev, A., Wang, P., Zhang, L., Shu, W., Wang, H., & Xuan, J. (2017) · Advanced Science · doi:10.1002/advs.201700187 · Cited by 291
Generalized 3D Printing of Graphene-Based Mixed-Dimensional Hybrid Aerogels
Tang, X., Zhou, H., Cai, Z., Cheng, D., He, P., Xie, P., Zhang, D., & Fan, T. (2018) · ACS Nano · doi:10.1021/acsnano.8b00304 · Cited by 290
Hou, Y., Wen, Z., Cui, S., Feng, X., & Chen, J. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04496 · Cited by 289
High-Mass-Loading Electrodes for Advanced Secondary Batteries and Supercapacitors
Wu, F., Liu, M., Li, Y., Feng, X., Zhang, K., Bai, Y., Wang, X., & Wu, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00093-0 · Cited by 288
Aerogels Meet Phase Change Materials: Fundamentals, Advances, and Beyond
Liu, P., Chen, X., Li, Y., Cheng, P., Tang, Z., Lv, J., Aftab, W., & Wang, G. (2022) · ACS Nano · doi:10.1021/acsnano.2c05067 · Cited by 285
Bayesian Machine Learning in Metamaterial Design: Fragile Becomes Supercompressible
Bessa, M. A., Glowacki, P., & Houlder, M. (2019) · Advanced Materials · doi:10.1002/adma.201904845 · Cited by 280
Si, Y., Wang, L., Wang, X., Tang, N., Yu, J., & Ding, B. (2017) · Advanced Materials · doi:10.1002/adma.201700339 · Cited by 277
Carbon dioxide separation and capture by adsorption: a review
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01589-z · Cited by 275
Nguyen, D. T., Meyers, C., Yee, T. D., Dudukovic, N. A., Destino, J. F., Zhu, C., Duoss, E. B., Baumann, T. F., Suratwala, T., Smay, J. E., et al. (2017) · Advanced Materials · doi:10.1002/adma.201701181 · Cited by 273
Self-citationSun, L., Jiang, Z., Yuan, B., Zhi, S., Zhang, Y., Li, J., & Wu, A. (2021) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2021.08.002 · Cited by 271
Yang, J., Tang, L.-S., Bai, L., Bao, R.-Y., Liu, Z.-Y., Xie, B.-H., Yang, M.-B., & Yang, W. (2019) · Materials Horizons · doi:10.1039/c8mh01219a · Cited by 269
Direct Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures
Li, V. C.-F., Dunn, C. K., Zhang, Z., Deng, Y., & Qi, H. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-07771-y · Cited by 269
Additive manufacturing of polymeric composites from material processing to structural design
Yuan, S., Li, S., Zhu, J., & Tang, Y. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108903 · Cited by 267
Superelastic Hard Carbon Nanofiber Aerogels
Yu, Z., Qin, B., Ma, Z., Huang, J., Li, S., Zhao, H., Li, H., Zhu, Y., Wu, H., & Yu, S. (2019) · Advanced Materials · doi:10.1002/adma.201900651 · Cited by 265
Shen, X., Zheng, Q., & Kim, J.-K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100708 · Cited by 264
Gorgolis, G., & Galiotis, C. (2017) · 2D Materials · doi:10.1088/2053-1583/aa7883 · Cited by 259
Laminated Object Manufacturing of 3D‐Printed Laser‐Induced Graphene Foams
Luong, D. X., Subramanian, A. K., Silva, G. A. L., Yoon, J., Cofer, S., Yang, K., Owuor, P. S., Wang, T., Wang, Z., Lou, J., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707416 · Cited by 257
Kou, T., Wang, S., Shi, R., Zhang, T., Chiovoloni, S., Lu, J. Q., Chen, W., Worsley, M. A., Wood, B. C., Baker, S. E., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002955 · Cited by 257
Self-citation3D Printing Sulfur Copolymer‐Graphene Architectures for Li‐S Batteries
Shen, K., Mei, H., Li, B., Ding, J., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701527 · Cited by 256
Zhang, C., Li, Y., Kang, W., Liu, X., & Wang, Q. (2021) · SusMat · doi:10.1002/sus2.11 · Cited by 256
Qiang, F., Hu, L.-L., Gong, L.-X., Zhao, L., Li, S.-N., & Tang, L.-C. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.054 · Cited by 253
Tong, X., Li, N., Zeng, M., & Wang, Q. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.03.031 · Cited by 222
Low‐Density Open Cellular Sponges as Functional Materials
Jiang, S., Agarwal, S., & Greiner, A. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201700684 · Cited by 217
Monolithic aerogel photocatalysts: a review
Wan, W., Zhang, R., Ma, M., & Zhou, Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta09227j · Cited by 205
Parale, V. G., Kim, T., Choi, H., Phadtare, V. D., Dhavale, R. P., Kanamori, K., & Park, H. (2024) · Advanced Materials · doi:10.1002/adma.202307772 · Cited by 146
Ye, S., Liu, Y., & Feng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04536 · Cited by 108
Karamikamkar, S., Yalcintas, E. P., Haghniaz, R., de Barros, N. R., Mecwan, M., Nasiri, R., Davoodi, E., Nasrollahi, F., Erdem, A., Kang, H., et al. (2023) · Advanced Science · doi:10.1002/advs.202204681 · Cited by 109
Zhao, H.-B., Yuan, L., Fu, Z.-B., Wang, C.-Y., Yang, X., Zhu, J.-Y., Qu, J., Chen, H.-B., & Schiraldi, D. A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00510 · Cited by 99
Yang, W., Liu, S., Wang, Z., Liu, H., Pan, C., Liu, C., & Shen, C. (2024) · Nano Energy · doi:10.1016/j.nanoen.2024.109799 · Cited by 95
Integrated Energy Aerogel of N,S-rGO/WSe 2 /NiFe-LDH for Both Energy Conversion and Storage
Xu, X., Chu, H., Zhang, Z., Dong, P., Baines, R., Ajayan, P. M., Shen, J., & Ye, M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09866 · Cited by 77
Shi, Y., Gao, W., Lu, H., Huang, Y., Zuo, L., Fan, W., & Liu, T. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01181 · Cited by 49
Review and Perspectives on the Sustainability of Organic Aerogels
García-González, C. A., Blanco-Vales, M., Barros, J., Boccia, A. C., Budtova, T., Durães, L., Erkey, C., Gallo, M., Herman, P., Kalmár, J., et al. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c09747 · Cited by 48
Ultra-stretchable graphene aerogels at ultralow temperatures
Yang, G., Zhang, X., Wang, R., Liu, X., Zhang, J., Zong, L., & Yang, H. (2023) · Materials Horizons · doi:10.1039/d3mh00014a · Cited by 43
Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions
Chandrasekaran, S., Feaster, J., Ynzunza, J., Li, F., Wang, X., Nelson, A. J., & Worsley, M. A. (2022) · ACS Materials Au · doi:10.1021/acsmaterialsau.2c00014 · Cited by 38
Self-citationMulti-functional 2D hybrid aerogels for gas absorption applications
Androulidakis, C., Kotsidi, M., Gorgolis, G., Pavlou, C., Sygellou, L., Paterakis, G., Koutroumanis, N., & Galiotis, C. (2021) · Scientific Reports · doi:10.1038/s41598-021-92957-8 · Cited by 30
Aerogels-Inspired based Photo and Electrocatalyst for Water Splitting to Produce Hydrogen
Al-Hamamre, Z., Karimzadeh, Z., Ji, S., Choi, H., & Maleki, H. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101670 · Cited by 18
Hybrid Transition Metal Dichalcogenide/Graphene Microspheres for Hydrogen Evolution Reaction
Lunardon, M., Ran, J., Mosconi, D., Marega, C., Wang, Z., Xia, H., Agnoli, S., & Granozzi, G. (2020) · Nanomaterials · doi:10.3390/nano10122376 · Cited by 17
“Thence, the obtained TMDC/GOAM samples were annealed to stabilize the GOAM structure, causing a covalent crosslinking between graphene sheets [44,45], while partially reducing the GO to prGO.”
Method
Metadata
- Authors
- Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A.
- Venue
- Nature Communications
- Published
- 2015-04-22
- Volume
- 6
- Issue
- 1
- Pages
- 6962-6962
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2075367033
- Cited by
- 1,148
- References
- 57
- FWCI
- 43.70
- Type
- journal article
- Language
- en
- Open access
- gold
- Licence
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.