The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Three-Dimensional Fiber Deposition of Cell-Laden, Viable, Patterned Constructs for Bone Tissue Printing
Abstract
Organ or tissue printing, a novel approach in tissue engineering, creates layered, cell-laden hydrogel scaffolds with a defined three-dimensional (3D) structure and organized cell placement. In applying the concept of tissue printing for the development of vascularized bone grafts, the primary focus lies on combining endothelial progenitors and bone marrow stromal cells (BMSCs). Here we characterize the applicability of 3D fiber deposition with a plotting device, Bioplotter, for the fabrication of spatially organized, cell-laden hydrogel constructs. The viability of printed BMSCs was studied in time, in several hydrogels, and extruded from different needle diameters. Our findings indicate that cells survive the extrusion and that their subsequent viability was not different from that of unprinted cells. The applied extrusion conditions did not affect cell survival, and BMSCs could subsequently differentiate along the osteoblast lineage. Furthermore, we were able to combine two distinct cell populations within a single scaffold by exchanging the printing syringe during deposition, indicating that this 3D fiber deposition system is suited for the development of bone grafts containing multiple cell types.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Lutolf, M. P., & Hubbell, J. A. (2005) · Nature Biotechnology · doi:10.1038/nbt1055 · Cited by 4,551
Organ printing: computer-aided jet-based 3D tissue engineering
Mironov, V., Boland, T., Trusk, T., Forgacs, G., & Markwald, R. R. (2003) · Trends in Biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,276
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,035
Rapid prototyping in tissue engineering: challenges and potential
Yeong, W.-Y., Chua, C.-K., Leong, K.-F., & Chandrasekaran, M. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.10.004 · Cited by 807
Landers, R., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00139-4 · Cited by 624
Woodfield, T. B. F., Malda, J., de Wijn, J., Péters, F., Riesle, J., & van Blitterswijk, C. A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.056 · Cited by 618
Self-citationA three-dimensional osteochondral composite scaffold for articular cartilage repair
Sherwood, J. K., Riley, S. L., Palazzolo, R., Brown, S. C., Monkhouse, D. C., Coates, M., Griffith, L. G., Landeen, L. K., & Ratcliffe, A. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00223-5 · Cited by 610
Modular tissue engineering: engineering biological tissues from the bottom up
Nichol, J. W., & Khademhosseini, A. (2009) · Soft Matter · doi:10.1039/b814285h · Cited by 567
Cell and organ printing 1: Protein and cell printers
Wilson, W. C., & Boland, T. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10057 · Cited by 531
Cited by
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Self-citationCurrent advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine
Annabi, N., Tamayol, A., Uquillas, J. A., Akbari, M., Bertassoni, L. E., Cha, C., Camci‐Unal, G., Dokmeci, M. R., Peppas, N. A., & Khademhosseini, A. (2014) · Advanced Materials · doi:10.1002/adma.201303233 · Cited by 1,409
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
The bioink: A comprehensive review on bioprintable materials
Hospodiuk, M., Dey, M., Sosnoski, D., & Ozbolat, I. T. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.12.006 · Cited by 1,118
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Paxton, N., Smolan, W., Böck, T., Melchels, F., Groll, J., & Jungst, T. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8dd8 · Cited by 950
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
Three-dimensional (3D) printed scaffold and material selection for bone repair
Zhang, L., Yang, G., Johnson, B. N., & Jia, X. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.039 · Cited by 865
A comprehensive review on droplet-based bioprinting: Past, present and future
Gudapati, H., Dey, M., & Ozbolat, I. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.012 · Cited by 859
Recent trends in bioinks for 3D printing
Gopinathan, J., & Noh, I. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0122-1 · Cited by 846
Additive manufacturing of biomaterials
Bose, S., Ke, D., Sahasrabudhe, H., & Bandyopadhyay, A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.08.003 · Cited by 738
Designing Biomaterials for 3D Printing
Guvendiren, M., Molde, J., Soares, R. M. D., & Kohn, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00121 · Cited by 732
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Bioprinting Toward Organ Fabrication: Challenges and Future Trends
Ozbolat, I. T., & Yu, Y. (2013) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2013.2243912 · Cited by 666
Research on the printability of hydrogels in 3D bioprinting
He, Y., Yang, F., Zhao, H., Gao, Q., Xia, B., & Fu, J. (2016) · Scientific Reports · doi:10.1038/srep29977 · Cited by 654
3D bioprinting of tissues and organs for regenerative medicine
Vijayavenkataraman, S., Yan, W.-C., Lu, W. F., Wang, C.-H., & Fuh, J. Y. H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.004 · Cited by 630
Biofabrication of bone tissue: approaches, challenges and translation for bone regeneration
Tang, D., Tare, R. S., Yang, L.-Y., Williams, D. F., Ou, K.-L., & Oreffo, R. O. C. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.024 · Cited by 613
“The authors showed that cells were not damaged during the printing process and that the cells in alginate constructs retained their ability to undergo osteogenic differentiation two weeks after printing [30].”
BackgroundModular tissue engineering: engineering biological tissues from the bottom up
Nichol, J. W., & Khademhosseini, A. (2009) · Soft Matter · doi:10.1039/b814285h · Cited by 567
Sobral, J. M., Caridade, S. G., Sousa, R. A., Mano, J. F., & Reis, R. L. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.11.003 · Cited by 561
Das, S., Pati, F., Choi, Y.-J., Rijal, G., Shim, J.-H., Kim, S. W., Ray, A. R., Cho, D.-W., & Ghosh, S. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.023 · Cited by 553
Engineering alginate as bioink for bioprinting
Jia, J., Richards, D. J., Pollard, S., Tan, Y., Rodriguez, J., Visconti, R. P., Trusk, T. C., Yost, M. J., Yao, H., Markwald, R. R., et al. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.034 · Cited by 549
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Three-dimensional printing of Hela cells for cervical tumor model in vitro
Zhao, Y., Yao, R., Ouyang, L., Ding, H., Zhang, T., Zhang, K., Cheng, S., & Sun, W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035001 · Cited by 534
Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495
Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting
Panwar, A., & Tan, L. (2016) · Molecules · doi:10.3390/molecules21060685 · Cited by 472
Low, Z.-X., Chua, Y. T., Ray, B. M., Mattia, D., Metcalfe, I. S., & Patterson, D. A. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.10.006 · Cited by 465
Fiber-based tissue engineering: progress, challenges, and opportunities
Tamayol, A., Akbari, M., Annabi, N., Paul, A., Khademhosseini, A., & Juncker, D. (2013) · Biotechnology Advances · doi:10.1016/j.biotechadv.2012.11.007 · Cited by 458
Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics
Kurian, A. G., Singh, R. K., Patel, K. D., Lee, J.-H., & Kim, H.-W. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.06.027 · Cited by 444
Bioprinting Technology: A Current State-of-the-Art Review
Dababneh, A. B., & Ozbolat, I. T. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028512 · Cited by 427
Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation
Wu, Z., Su, X., Xu, Y., Kong, B., Sun, W., & Mi, S. (2016) · Scientific Reports · doi:10.1038/srep24474 · Cited by 418
Bioprinting of hybrid tissue constructs with tailorable mechanical properties
Schuurman, W., Khristov, V, Pot, M. W., van Weeren, P. R., Dhert, W. J. A., & Malda, J. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/021001 · Cited by 409
Self-citationFedorovich, N. E., Schuurman, W., Wijnberg, H. M., Prins, H.-J., van Weeren, P. R., Malda, J., Alblas, J., & Dhert, W. J. A. (2012) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0060 · Cited by 403
Self-citationShim, J.-H., Lee, J.-S., Kim, J. Y., & Cho, D.-W. (2012) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/22/8/085014 · Cited by 379
Bio-inks for 3D bioprinting: recent advances and future prospects
Donderwinkel, I., van Hest, J. C. M., & Cameron, N. R. (2017) · Polymer Chemistry · doi:10.1039/c7py00826k · Cited by 378
A 3D bioprinted complex structure for engineering the muscle–tendon unit
Merceron, T. K., Burt, M., Seol, Y.-J., Kang, H.-W., Lee, S. J., Yoo, J. J., & Atala, A. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035003 · Cited by 373
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Bhuvanesh Kumar, M., & Sathiya, P. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107228 · Cited by 372
A Review of Three-Dimensional Printing in Tissue Engineering
Sears, N. A., Seshadri, D. R., Dhavalikar, P. S., & Cosgriff-Hernandez, E. (2016) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2015.0464 · Cited by 360
Wüst, S., Godla, M. E., Müller, R., & Hofmann, S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.016 · Cited by 357
Bioprinting technology and its applications
Seol, Y.-J., Kang, H.-W., Lee, S. J., Atala, A., & Yoo, J. J. (2014) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezu148 · Cited by 355
Application areas of 3D bioprinting
Ozbolat, I. T., Peng, W., & Ozbolat, V. (2016) · Drug Discovery Today · doi:10.1016/j.drudis.2016.04.006 · Cited by 350
Engineering an in vitro air-blood barrier by 3D bioprinting
Horváth, L., Umehara, Y., Jud, C., Blank, F., Petri-Fink, A., & Rothen-Rutishauser, B. (2015) · Scientific Reports · doi:10.1038/srep07974 · Cited by 345
3D Bioprinting for Cartilage and Osteochondral Tissue Engineering
Daly, A. C., Freeman, F. E., Gonzalez‐Fernandez, T., Critchley, S. E., Nulty, J., & Kelly, D. J. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700298 · Cited by 334
Boularaoui, S., Al Hussein, G., Khan, K. A., Christoforou, N., & Stefanini, C. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00093 · Cited by 320
Tissue Engineering of Articular Cartilage with Biomimetic Zones
Klein, T. J., Malda, J., Sah, R. L., & Hutmacher, D. W. (2009) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2008.0563 · Cited by 315
Biomatrices and biomaterials for future developments of bioprinting and biofabrication
Nakamura, M., Iwanaga, S., Henmi, C., Arai, K., & Nishiyama, Y. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014110 · Cited by 311
Advances in additive manufacturing for bone tissue engineering scaffolds
Moreno Madrid, A. P., Vrech, S. M., Sanchez, M. A., & Rodriguez, A. P. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.03.037 · Cited by 307
Layer by Layer Three-dimensional Tissue Epitaxy by Cell-Laden Hydrogel Droplets
Moon, S., Hasan, S. K., Song, Y. S., Xu, F., Keles, H. O., Manzur, F., Mikkilineni, S., Hong, J. W., Nagatomi, J., Haeggstrom, E., et al. (2010) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2009.0179 · Cited by 305
3D Bioprinting of Tissue/Organ Models
Pati, F., Gantelius, J., & Svahn, H. A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201505062 · Cited by 301
Hyaluronic Acid and Dextran-Based Semi-IPN Hydrogels as Biomaterials for Bioprinting
Pescosolido, L., Schuurman, W., Malda, J., Matricardi, P., Alhaique, F., Coviello, T., van Weeren, P. R., Dhert, W. J. A., Hennink, W. E., & Vermonden, T. (2011) · Biomacromolecules · doi:10.1021/bm200178w · Cited by 280
Self-citationAdvances in Porous Scaffold Design for Bone and Cartilage Tissue Engineering and Regeneration
Cheng, A., Schwartz, Z., Kahn, A., Li, X., Shao, Z., Sun, M., Ao, Y., Boyan, B. D., & Chen, H. (2019) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2018.0119 · Cited by 275
In situ bioprinting – Bioprinting from benchside to bedside?
Singh, S., Choudhury, D., Yu, F., Mironov, V., & Naing, M. W. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.08.045 · Cited by 273
Tissue engineering by decellularization and 3D bioprinting
Garreta, E., Oria, R., Tarantino, C., Pla-Roca, M., Prado, P., Fernández-Avilés, F., Campistol, J. M., Samitier, J., & Montserrat, N. (2017) · Materials Today · doi:10.1016/j.mattod.2016.12.005 · Cited by 263
Bioinks and bioprinting: A focused review
Mobaraki, M., Ghaffari, M., Yazdanpanah, A., Luo, Y., & Mills, D. K. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00080 · Cited by 258
3D Bioprinting of Human Tissues: Biofabrication, Bioinks, and Bioreactors
Zhang, J., Wehrle, E., Rubert, M., & Müller, R. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22083971 · Cited by 257
Biomaterials-based 3D cell printing for next-generation therapeutics and diagnostics
Jang, J., Park, J. Y., Gao, G., & Cho, D.-W. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.11.030 · Cited by 254
Animal-derived products in science and current alternatives
Duarte, A. C., Costa, E. C., Filipe, H. A. L., Saraiva, S. M., Jacinto, T., Miguel, S. P., Ribeiro, M. P., & Coutinho, P. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213428 · Cited by 117
Bioprinting and organ-on-chip applications towards personalized medicine for bone diseases
Arrigoni, C., Gilardi, M., Bersini, S., Candrian, C., & Moretti, M. (2017) · Stem Cell Reviews and Reports · doi:10.1007/s12015-017-9741-5 · Cited by 68
Metadata
- Authors
- Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A.
- Venue
- Tissue Engineering Part A
- Publisher
- SAGE Publications
- Published
- 2008-01
- Volume
- 14
- Issue
- 1
- Pages
- 127-133
- ISSN
- 1937-3341 (ISSN-L)
- 1937-335X
- OpenAlex
- W1969936574
- Cited by
- 410
- References
- 32
- FWCI
- 9.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.