The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Design and Fabrication of Human Skin by Three-Dimensional Bioprinting
Open accessAbstract
Three-dimensional (3D) bioprinting, a flexible automated on-demand platform for the free-form fabrication of complex living architectures, is a novel approach for the design and engineering of human organs and tissues. Here, we demonstrate the potential of 3D bioprinting for tissue engineering using human skin as a prototypical example. Keratinocytes and fibroblasts were used as constituent cells to represent the epidermis and dermis, and collagen was used to represent the dermal matrix of the skin. Preliminary studies were conducted to optimize printing parameters for maximum cell viability as well as for the optimization of cell densities in the epidermis and dermis to mimic physiologically relevant attributes of human skin. Printed 3D constructs were cultured in submerged media conditions followed by exposure of the epidermal layer to the air-liquid interface to promote maturation and stratification. Histology and immunofluorescence characterization demonstrated that 3D printed skin tissue was morphologically and biologically representative of in vivo human skin tissue. In comparison with traditional methods for skin engineering, 3D bioprinting offers several advantages in terms of shape- and form retention, flexibility, reproducibility, and high culture throughput. It has a broad range of applications in transdermal and topical formulation discovery, dermal toxicity studies, and in designing autologous grafts for wound healing. The proof-of-concept studies presented here can be further extended for enhancing the complexity of the skin model via the incorporation of secondary and adnexal structures or the inclusion of diseased cells to serve as a model for studying the pathophysiology of skin diseases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The 500 Dalton rule for the skin penetration of chemical compounds and drugs
Bos, J. D., & Meinardi, M. M. H. M. (2000) · Experimental Dermatology · doi:10.1034/j.1600-0625.2000.009003165.x · Cited by 1,465
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
Organ printing: computer-aided jet-based 3D tissue engineering
Mironov, V., Boland, T., Trusk, T., Forgacs, G., & Markwald, R. R. (2003) · Trends in Biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,276
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
Progress and opportunities for tissue-engineered skin
MacNeil, S. (2007) · Nature · doi:10.1038/nature05664 · Cited by 1,112
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,035
Yannas, I. V., Lee, E., Orgill, D. P., Skrabut, E. M., & Murphy, G. F. (1989) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.86.3.933 · Cited by 972
A review of tissue-engineered skin bioconstructs available for skin reconstruction
Shevchenko, R. V., James, S. L., & James, S. E. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2009.0403 · Cited by 735
Inkjet printing for high-throughput cell patterning
Roth, E. A., Xu, T., Das, M., Gregory, C., Hickman, J. J., & Boland, T. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.052 · Cited by 714
Alternative (non-animal) methods for cosmetics testing: current status and future prospects—2010
Adler, S., Basketter, D., Creton, S., Pelkonen, O., van Benthem, J., Zuang, V., Andersen, K. E., Angers-Loustau, A., Aptula, A., Bal-Price, A., et al. (2011) · Archives of Toxicology · doi:10.1007/s00204-011-0693-2 · Cited by 584
Cited by
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
Mathew-Steiner, S. S., Roy, S., & Sen, C. K. (2021) · Bioengineering · doi:10.3390/bioengineering8050063 · Cited by 993
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
A comprehensive review on droplet-based bioprinting: Past, present and future
Gudapati, H., Dey, M., & Ozbolat, I. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.012 · Cited by 859
Biofabrication strategies for 3D in vitro models and regenerative medicine
Moroni, L., Burdick, J. A., Highley, C., Lee, S. J., Morimoto, Y., Takeuchi, S., & Yoo, J. J. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0006-y · Cited by 753
Designing Biomaterials for 3D Printing
Guvendiren, M., Molde, J., Soares, R. M. D., & Kohn, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00121 · Cited by 732
3D Bioprinting for Tissue and Organ Fabrication
Zhang, Y. S., Yue, K., Aleman, J., Mollazadeh-Moghaddam, K., Bakht, S. M., Yang, J., Jia, W., Dell’Erba, V., Assawes, P., Shin, S. R., et al. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1612-8 · Cited by 682
Advanced Bioinks for 3D Printing: A Materials Science Perspective
Chimene, D., Lennox, K. K., Kaunas, R. R., & Gaharwar, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1638-y · Cited by 679
Research on the printability of hydrogels in 3D bioprinting
He, Y., Yang, F., Zhao, H., Gao, Q., Xia, B., & Fu, J. (2016) · Scientific Reports · doi:10.1038/srep29977 · Cited by 654
3D bioprinting of tissues and organs for regenerative medicine
Vijayavenkataraman, S., Yan, W.-C., Lu, W. F., Wang, C.-H., & Fuh, J. Y. H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.004 · Cited by 630
Medical 3D Printing for the Radiologist
Mitsouras, D., Liacouras, P., Imanzadeh, A., Giannopoulos, A. A., Cai, T., Kumamaru, K. K., George, E., Wake, N., Caterson, E. J., Pomahac, B., et al. (2015) · RadioGraphics · doi:10.1148/rg.2015140320 · Cited by 619
Recent advances in bioprinting techniques: approaches, applications and future prospects
Li, J., Chen, M., Fan, X., & Zhou, H. (2016) · Journal of Translational Medicine · doi:10.1186/s12967-016-1028-0 · Cited by 608
Current and emerging applications of 3D printing in medicine
Liaw, C.-Y., & Guvendiren, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7279 · Cited by 604
Opportunities and challenges of translational 3D bioprinting
Murphy, S. V., De Coppi, P., & Atala, A. (2019) · Nature Biomedical Engineering · doi:10.1038/s41551-019-0471-7 · Cited by 563
Mofazzal Jahromi, M. A., Sahandi Zangabad, P., Moosavi Basri, S. M., Sahandi Zangabad, K., Ghamarypour, A., Aref, A. R., Karimi, M., & Hamblin, M. R. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2017.08.001 · Cited by 551
Recent Advances in Biomaterials for 3D Printing and Tissue Engineering
Jammalamadaka, U., & Tappa, K. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010022 · Cited by 526
Mechanically Flexible Conductors for Stretchable and Wearable E‐Skin and E‐Textile Devices
Wang, B., & Facchetti, A. (2019) · Advanced Materials · doi:10.1002/adma.201901408 · Cited by 515
Albanna, M., Binder, K. W., Murphy, S. V., Kim, J., Qasem, S. A., Zhao, W., Tan, J., El-Amin, I. B., Dice, D. D., Marco, J., et al. (2019) · Scientific Reports · doi:10.1038/s41598-018-38366-w · Cited by 512
Development of 3D bioprinting: From printing methods to biomedical applications
Gu, Z., Fu, J., Lin, H., & He, Y. (2020) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2019.11.003 · Cited by 511
Kim, B. S., Kwon, Y. W., Kong, J.-S., Park, G. T., Gao, G., Han, W., Kim, M.-B., Lee, H., Kim, J. H., & Cho, D.-W. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.03.040 · Cited by 502
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495
Creating perfused functional vascular channels using 3D bio-printing technology
Lee, V. K., Kim, D. Y., Ngo, H., Lee, Y., Seo, L., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.083 · Cited by 494
Self-citation3D Cell Culture in Alginate Hydrogels
Andersen, T., Auk-Emblem, P., & Dornish, M. (2015) · Microarrays · doi:10.3390/microarrays4020133 · Cited by 472
Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting
Panwar, A., & Tan, L. (2016) · Molecules · doi:10.3390/molecules21060685 · Cited by 472
Additive Manufacturing of Biomaterials, Tissues, and Organs
Zadpoor, A. A., & Malda, J. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1719-y · Cited by 462
3D bioprinting of functional human skin: production and in vivo analysis
Cubo, N., Garcia, M., del Cañizo, J. F., Velasco, D., & Jorcano, J. L. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/015006 · Cited by 454
Skin tissue regeneration for burn injury
Shpichka, A., Butnaru, D., Bezrukov, E. A., Sukhanov, R. B., Atala, A., Burdukovskii, V., Zhang, Y., & Timashev, P. (2019) · Stem Cell Research & Therapy · doi:10.1186/s13287-019-1203-3 · Cited by 417
Recent Advances in Electrospun Nanofibers for Wound Healing
Chen, S., Liu, B., Carlson, M. A., Gombart, A. F., Reilly, D. A., & Xie, J. (2017) · Nanomedicine · doi:10.2217/nnm-2017-0017 · Cited by 409
Afewerki, S., Sheikhi, A., Kannan, S., Ahadian, S., & Khademhosseini, A. (2019) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10124 · Cited by 409
Vat polymerization-based bioprinting—process, materials, applications and regulatory challenges
Ng, W. L., Lee, J. M., Zhou, M., Chen, Y.-W., Lee, K.-X. A., Yeong, W. Y., & Shen, Y.-F. (2020) · Biofabrication · doi:10.1088/1758-5090/ab6034 · Cited by 402
Emerging Biofabrication Strategies for Engineering Complex Tissue Constructs
Pedde, R. D., Mirani, B., Navaei, A., Styan, T., Wong, S., Mehrali, M., Thakur, A., Mohtaram, N. K., Bayati, A., Dolatshahi‐Pirouz, A., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606061 · Cited by 388
Bio-inks for 3D bioprinting: recent advances and future prospects
Donderwinkel, I., van Hest, J. C. M., & Cameron, N. R. (2017) · Polymer Chemistry · doi:10.1039/c7py00826k · Cited by 378
Four-dimensional bioprinting: Current developments and applications in bone tissue engineering
Wan, Z., Zhang, P., Liu, Y., Lv, L., & Zhou, Y. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.10.038 · Cited by 368
Askari, M., Afzali Naniz, M., Kouhi, M., Saberi, A., Zolfagharian, A., & Bodaghi, M. (2021) · Biomaterials Science · doi:10.1039/d0bm00973c · Cited by 369
Three-dimensional cell culture systems as an in vitro platform for cancer and stem cell modeling
Chaicharoenaudomrung, N., Kunhorm, P., & Noisa, P. (2019) · World Journal of Stem Cells · doi:10.4252/wjsc.v11.i12.1065 · Cited by 360
Human Skin 3D Bioprinting Using Scaffold‐Free Approach
Pourchet, L. J., Thepot, A., Albouy, M., Courtial, E. J., Boher, A., Blum, L. J., & Marquette, C. A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601101 · Cited by 352
Application areas of 3D bioprinting
Ozbolat, I. T., Peng, W., & Ozbolat, V. (2016) · Drug Discovery Today · doi:10.1016/j.drudis.2016.04.006 · Cited by 350
Bioprinting: From Tissue and Organ Development to in Vitro Models
Mota, C., Camarero-Espinosa, S., Baker, M. B., Wieringa, P., & Moroni, L. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00789 · Cited by 345
Lee, V. K., Lanzi, A. M., Ngo, H., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-014-0340-0 · Cited by 342
Self-citationBioprinting and its applications in tissue engineering and regenerative medicine
Aljohani, W., Ullah, M. W., Zhang, X., & Yang, G. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.08.171 · Cited by 335
4D printing and stimuli-responsive materials in biomedical aspects
Lui, Y. S., Sow, W. T., Tan, L. P., Wu, Y., Lai, Y., & Li, H. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.005 · Cited by 333
Pattanayak, P., Singh, S. K., Gulati, M., Vishwas, S., Kapoor, B., Chellappan, D. K., Anand, K., Gupta, G., Jha, N. K., Gupta, P. K., et al. (2021) · Microfluidics and Nanofluidics · doi:10.1007/s10404-021-02502-2 · Cited by 330
Boularaoui, S., Al Hussein, G., Khan, K. A., Christoforou, N., & Stefanini, C. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00093 · Cited by 320
3D bioprinting for drug discovery and development in pharmaceutics
Peng, W., Datta, P., Ayan, B., Ozbolat, V., Sosnoski, D., & Ozbolat, I. T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.05.025 · Cited by 313
Design and Printing Strategies in 3D Bioprinting of Cell‐Hydrogels: A Review
Lee, J. M., & Yeong, W. Y. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600435 · Cited by 310
3D bioprinting for skin tissue engineering: Current status and perspectives
Weng, T., Zhang, W., Xia, Y., Wu, P., Yang, M., Jin, R., Xia, S., Wang, J., You, C., Han, C., et al. (2021) · Journal of Tissue Engineering · doi:10.1177/20417314211028574 · Cited by 303
Stem Cells in Skin Regeneration, Wound Healing, and Their Clinical Applications
Ojeh, N., Pastar, I., Tomic-Canic, M., & Stojadinovic, O. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms161025476 · Cited by 303
3D Bioprinting of Tissue/Organ Models
Pati, F., Gantelius, J., & Svahn, H. A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201505062 · Cited by 301
Polyelectrolyte gelatin-chitosan hydrogel optimized for 3D bioprinting in skin tissue engineering
Ng, W. L., Yeong, W. Y., & Naing, M. W. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.2016.01.009 · Cited by 293
Kim, B. S., Gao, G., Kim, J. Y., & Cho, D. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801019 · Cited by 289
Print Me An Organ! Why We Are Not There Yet
Ng, W. L., Chua, C. K., & Shen, Y.-F. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101145 · Cited by 287
Direct 3D cell-printing of human skin with functional transwell system
Kim, B. S., Lee, J.-S., Gao, G., & Cho, D.-W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa71c8 · Cited by 282
Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review
Fatimi, A., Okoro, O. V., Podstawczyk, D., Siminska-Stanny, J., & Shavandi, A. (2022) · Gels · doi:10.3390/gels8030179 · Cited by 276
Baltazar, T., Merola, J., Catarino, C., Xie, C. B., Kirkiles-Smith, N. C., Lee, V., Hotta, S., Dai, G., Xu, X., Ferreira, F. C., et al. (2020) · Tissue Engineering Part A · doi:10.1089/ten.tea.2019.0201 · Cited by 274
Self-citation3D bioprinting of skin: a state-of-the-art review on modelling, materials, and processes
Vijayavenkataraman, S., Lu, W. F., & Fuh, J. Y. H. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032001 · Cited by 273
Augustine, R., Rehman, S. R. U., Ahmed, R., Zahid, A. A., Sharifi, M., Falahati, M., & Hasan, A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.03.207 · Cited by 273
Fabrication and Applications of Micro/Nanostructured Devices for Tissue Engineering
Limongi, T., Tirinato, L., Pagliari, F., Giugni, A., Allione, M., Perozziello, G., Candeloro, P., & Di Fabrizio, E. (2017) · Nano-Micro Letters · doi:10.1007/s40820-016-0103-7 · Cited by 269
Handheld skin printer: in situ formation of planar biomaterials and tissues
Hakimi, N., Cheng, R., Leng, L., Sotoudehfar, M., Ba, P. Q., Bakhtyar, N., Amini-Nik, S., Jeschke, M. G., & Günther, A. (2018) · Lab on a Chip · doi:10.1039/c7lc01236e · Cited by 259
Chitosan based-asymmetric membranes for wound healing: A review
Miguel, S. P., Moreira, A. F., & Correia, I. J. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.01.072 · Cited by 259
The arrival of commercial bioprinters – Towards 3D bioprinting revolution!
Choudhury, D., Anand, S., & Naing, M. W. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.v4i2.139 · Cited by 189
3D bioprinting of structural proteins
Włodarczyk-Biegun, M. K., & del Campo, A. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.04.019 · Cited by 185
Modelling the Complexity of Human Skin In Vitro
Hofmann, E., Schwarz, A., Fink, J., Kamolz, L.-P., & Kotzbeck, P. (2023) · Biomedicines · doi:10.3390/biomedicines11030794 · Cited by 129
Stepanovska, J., Supova, M., Hanzalek, K., Broz, A., & Matejka, R. (2021) · Biomedicines · doi:10.3390/biomedicines9091137 · Cited by 112
Next generation human skin constructs as advanced tools for drug development
Abaci, H., Guo, Z., Doucet, Y., Jacków, J., & Christiano, A. (2017) · Experimental Biology and Medicine · doi:10.1177/1535370217712690 · Cited by 104
Human skin models: From healthy to disease-mimetic systems; characteristics and applications
Moniz, T., Costa Lima, S. A., & Reis, S. (2020) · British Journal of Pharmacology · doi:10.1111/bph.15184 · Cited by 80
Human reconstructed skin xenografts on mice to model skin physiology
Salgado, G., Ng, Y. Z., Koh, L. F., Goh, C. S. M., & Common, J. E. (2017) · Differentiation · doi:10.1016/j.diff.2017.09.004 · Cited by 56
The future of skin toxicology testing–three-dimensional bioprinting meets microfluidics
Ng, W. L., & Yeong, W. Y. (2019) · International Journal of Bioprinting · doi:10.18063/ijb.v5i2.1.237 · Cited by 48
In situ 3D bioprinting: a promising technique in advanced biofabrication strategies
Mahmoudi, Z., Sedighi, M., Jafari, A., Naghieh, S., Stefanek, E., Akbari, M., & Savoji, H. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00260 · Cited by 38
Bioprinted Hydrogels for Fibrosis and Wound Healing: Treatment and Modeling
Guo, J. L., & Longaker, M. T. (2022) · Gels · doi:10.3390/gels9010019 · Cited by 23
“Many bioprinting approaches to mimicking the skin have therefore featured sequential deposition of layer-specific cell types such as fibroblasts and keratinocytes for the dermis and epidermis, respectively [11,48,54].”
BackgroundIn vitro 3D skin culture and its sustainability in toxicology: a narrative review
Masri, S., Fauzi, M. B., Rajab, N. F., Lee, W.-H., Zainal Abidin, D. A., & Siew, E. L. (2024) · Artificial Cells, Nanomedicine, and Biotechnology · doi:10.1080/21691401.2024.2407617 · Cited by 15
“Besides, a 3D skin tissue was produced by Lee et al. via inkjet printing multilayer constructs [31].”
InfluentialFostering a healthy culture: Biological relevance of in vitro and ex vivo skin models
Atwood, S. X., & Plikus, M. V. (2021) · Experimental Dermatology · doi:10.1111/exd.14296 · Cited by 15
Metadata
- Authors
- Lee, V., Singh, G., Trasatti, J. P., Bjornsson, C., Xu, X., Tran, T. N., Yoo, S.-S., Dai, G., & Karande, P.
- Venue
- Tissue Engineering Part C: Methods
- Publisher
- SAGE Publications
- Published
- 2014-06
- Volume
- 20
- Issue
- 6
- Pages
- 473-484
- ISSN
- 1937-3384 (ISSN-L)
- 1937-3392
- OpenAlex
- W1481145212
- Cited by
- 725
- References
- 40
- FWCI
- 15.94
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.