The DOI matches its Crossref record; 105 of the 105 references it cites were found in a registry or an index.
An Introduction to 3D Bioprinting: Possibilities, Challenges and Future Aspects
Open accessAbstract
Bioprinting is an emerging field in regenerative medicine. Producing cell-laden, three-dimensional structures to mimic bodily tissues has an important role not only in tissue engineering, but also in drug delivery and cancer studies. Bioprinting can provide patient-specific spatial geometry, controlled microstructures and the positioning of different cell types for the fabrication of tissue engineering scaffolds. In this brief review, the different fabrication techniques: laser-based, extrusion-based and inkjet-based bioprinting, are defined, elaborated and compared. Advantages and challenges of each technique are addressed as well as the current research status of each technique towards various tissue types. Nozzle-based techniques, like inkjet and extrusion printing, and laser-based techniques, like stereolithography and laser-assisted bioprinting, are all capable of producing successful bioprinted scaffolds. These four techniques were found to have diverse effects on cell viability, resolution and print fidelity. Additionally, the choice of materials and their concentrations were also found to impact the printing characteristics. Each technique has demonstrated individual advantages and disadvantages with more recent research conduct involving multiple techniques to combine the advantages of each technique.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146 · cited 1×
“It offers a fast and accurate fabrication, with resolutions ranging between 5–300 μm [61,62].”
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901 · cited 1×
“These properties can significantly affect print fidelity (construct stability and print deviation from the computer aided designs) as well as cell viability, proliferation and morphology after printing [25].”
Background3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Department of Materials, U. O. O., Sachlos, E., & Czernuszka, J. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a03 · Cited by 1,303
The role of bioreactors in tissue engineering
Martin, I., Wendt, D., & Heberer, M. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2003.12.001 · Cited by 1,215
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Hydrogels for Biomedical Applications: Their Characteristics and the Mechanisms behind Them
Chai, Q., Jiao, Y., & Yu, X. (2017) · Gels · doi:10.3390/gels3010006 · Cited by 1,072
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Zhang, Y. S., Arneri, A., Bersini, S., Shin, S.-R., Zhu, K., Goli-Malekabadi, Z., Aleman, J., Colosi, C., Busignani, F., Dell'Erba, V., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.003 · Cited by 951
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
Tekin, E., Smith, P. J., & Schubert, U. S. (2008) · Soft Matter · doi:10.1039/b711984d · Cited by 807
Application of inkjet printing to tissue engineering
Boland, T., Xu, T., Damon, B., & Cui, X. (2006) · Biotechnology Journal · doi:10.1002/biot.200600081 · Cited by 783
Human microvasculature fabrication using thermal inkjet printing technology
Cui, X., & Boland, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.056 · Cited by 704
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & D'Lima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 686
Metal deposition from a supported metal film using an excimer laser
Bohandy, J., Kim, B. F., & Adrian, F. J. (1986) · Journal of Applied Physics · doi:10.1063/1.337287 · Cited by 686
Bishop, E. S., Mostafa, S., Pakvasa, M., Luu, H. H., Lee, M. J., Wolf, J. M., Ameer, G. A., He, T.-C., & Reid, R. R. (2017) · Genes & Diseases · doi:10.1016/j.gendis.2017.10.002 · Cited by 683
Bioprinted Amniotic Fluid-Derived Stem Cells Accelerate Healing of Large Skin Wounds
Skardal, A., Mack, D., Kapetanovic, E., Atala, A., Jackson, J. D., Yoo, J., & Soker, S. (2012) · Stem Cells Translational Medicine · doi:10.5966/sctm.2012-0088 · Cited by 660
Research on the printability of hydrogels in 3D bioprinting
He, Y., Yang, F., Zhao, H., Gao, Q., Xia, B., & Fu, J. (2016) · Scientific Reports · doi:10.1038/srep29977 · Cited by 654
Biofabrication: A Guide to Technology and Terminology
Moroni, L., Boland, T., Burdick, J. A., De Maria, C., Derby, B., Forgacs, G., Groll, J., Li, Q., Malda, J., Mironov, V. A., et al. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2017.10.015 · Cited by 636
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633 · cited 1×
“5% GelMA, which maintained cell viabilities of ~80% after 5 days [71].”
BackgroundXu, T., Binder, K. W., Albanna, M. Z., Dice, D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 631
Michael, S., Sorg, H., Peck, C.-T., Koch, L., Deiwick, A., Chichkov, B., Vogt, P. M., & Reimers, K. (2013) · PLoS ONE · doi:10.1371/journal.pone.0057741 · Cited by 623
Bio-ink properties and printability for extrusion printing living cells
Chung, J. H. Y., Naficy, S., Yue, Z., Kapsa, R., Quigley, A., Moulton, S. E., & Wallace, G. G. (2013) · Biomaterials Science · doi:10.1039/c3bm00012e · Cited by 610
Recent advances in bioprinting techniques: approaches, applications and future prospects
Li, J., Chen, M., Fan, X., & Zhou, H. (2016) · Journal of Translational Medicine · doi:10.1186/s12967-016-1028-0 · Cited by 608
Thermal Inkjet Printing in Tissue Engineering and Regenerative Medicine
Cui, X., Boland, T., D.D'Lima, D., & K. Lotz, M. (2012) · Recent Patents on Drug Delivery & Formulation · doi:10.2174/187221112800672949 · Cited by 581
Kundu, J., Shim, J.-H., Jang, J., Kim, S.-W., & Cho, D.-W. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1682 · Cited by 552
Biocompatible Inkjet Printing Technique for Designed Seeding of Individual Living Cells
Nakamura, M., Kobayashi, A., Takagi, F., Watanabe, A., Hiruma, Y., Ohuchi, K., Iwasaki, Y., Horie, M., Morita, I., & Takatani, S. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1658 · Cited by 538
Yang, X., Lu, Z., Wu, H., Li, W., Zheng, L., & Zhao, J. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.09.002 · Cited by 533
Recent Advances in Biomaterials for 3D Printing and Tissue Engineering
Jammalamadaka, U., & Tappa, K. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010022 · Cited by 526
The Mechanisms of UV Mutagenesis
IKEHATA, H., & ONO, T. (2011) · Journal of Radiation Research · doi:10.1269/jrr.10175 · Cited by 522
Characterization of cell viability during bioprinting processes
Nair, K., Gandhi, M., Khalil, S., Yan, K. C., Marcolongo, M., Barbee, K., & Sun, W. (2009) · Biotechnology Journal · doi:10.1002/biot.200900004 · Cited by 510
Novel Biomaterials Used in Medical 3D Printing Techniques
Tappa, K., & Jammalamadaka, U. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010017 · Cited by 490
Mondschein, R. J., Kanitkar, A., Williams, C. B., Verbridge, S. S., & Long, T. E. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.005 · Cited by 475
Biomaterials for Integration with 3-D Bioprinting
Skardal, A., & Atala, A. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-014-1207-1 · Cited by 474
Photocrosslinkable polysaccharides forin situ hydrogel formation
Smeds, K. A., & Grinstaff, M. W. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200101)54:1<115::aid-jbm14>3.0.co;2-q · Cited by 471
Keriquel, V., Oliveira, H., Rémy, M., Ziane, S., Delmond, S., Rousseau, B., Rey, S., Catros, S., Amédée, J., Guillemot, F., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-01914-x · Cited by 447
Biological Laser Printing: A Novel Technique for Creating Heterogeneous 3-dimensional Cell Patterns
Barron, J. A., Wu, P., Ladouceur, H. D., & Ringeisen, B. R. (2004) · Biomedical Microdevices · doi:10.1023/b:bmmd.0000031751.67267.9f · Cited by 435
Microfluidics‐Enabled Multimaterial Maskless Stereolithographic Bioprinting
Miri, A. K., Nieto, D., Iglesias, L., Goodarzi Hosseinabadi, H., Maharjan, S., Ruiz‐Esparza, G. U., Khoshakhlagh, P., Manbachi, A., Dokmeci, M. R., Chen, S., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800242 · Cited by 431
Hsieh, F.-Y., Lin, H.-H., & Hsu, S.-H. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.028 · Cited by 420
3D printing of composite tissue with complex shape applied to ear regeneration
Lee, J.-S., Hong, J. M., Jung, J. W., Shim, J.-H., Oh, J.-H., & Cho, D.-W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024103 · Cited by 407
Shin, H., Olsen, B. D., & Khademhosseini, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.12.050 · Cited by 400
Lin, H., Zhang, D., Alexander, P. G., Yang, G., Tan, J., Cheng, A. W.-M., & Tuan, R. S. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.048 · Cited by 382
Functional 3D Neural Mini‐Tissues from Printed Gel‐Based Bioink and Human Neural Stem Cells
Gu, Q., Tomaskovic‐Crook, E., Lozano, R., Chen, Y., Kapsa, R. M., Zhou, Q., Wallace, G. G., & Crook, J. M. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600095 · Cited by 376
Maiullari, F., Costantini, M., Milan, M., Pace, V., Chirivì, M., Maiullari, S., Rainer, A., Baci, D., Marei, H. E.-S., Seliktar, D., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-31848-x · Cited by 372
Biomimetic 3D tissue printing for soft tissue regeneration
Pati, F., Ha, D.-H., Jang, J., Han, H. H., Rhie, J.-W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.043 · Cited by 368
Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells
Cui, X., Dean, D., Ruggeri, Z. M., & Boland, T. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22762 · Cited by 364
New Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks
Lim, K. S., Schon, B. S., Mekhileri, N. V., Brown, G. C. J., Chia, C. M., Prabakar, S., Hooper, G. J., & Woodfield, T. B. F. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00149 · Cited by 362
Generation of Three-Dimensional Hepatocyte/Gelatin Structures with Rapid Prototyping System
Wang, X., Yan, Y., Pan, Y., Xiong, Z., Liu, H., Cheng, J., Liu, F., Lin, F., Wu, R., Zhang, R., et al. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.83 · Cited by 353
Human Skin 3D Bioprinting Using Scaffold‐Free Approach
Pourchet, L. J., Thepot, A., Albouy, M., Courtial, E. J., Boher, A., Blum, L. J., & Marquette, C. A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601101 · Cited by 352
Gao, G., Schilling, A. F., Yonezawa, T., Wang, J., Dai, G., & Cui, X. (2014) · Biotechnology Journal · doi:10.1002/biot.201400305 · Cited by 351
The Pivotal Role of Vascularization in Tissue Engineering
Auger, F. A., Gibot, L., & Lacroix, D. (2013) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071812-152428 · Cited by 334
Stereolithography in tissue engineering
Skoog, S. A., Goering, P. L., & Narayan, R. J. (2014) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-013-5107-y · Cited by 321
In situ handheld three‐dimensional bioprinting for cartilage regeneration
Di Bella, C., Duchi, S., O'Connell, C. D., Blanchard, R., Augustine, C., Yue, Z., Thompson, F., Richards, C., Beirne, S., Onofrillo, C., et al. (2018) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2476 · Cited by 313
3D Bioprinting a Cell-Laden Bone Matrix for Breast Cancer Metastasis Study
Zhou, X., Zhu, W., Nowicki, M., Miao, S., Cui, H., Holmes, B., Glazer, R. I., & Zhang, L. G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10673 · Cited by 307
Recent advances in hydrogels for cartilage tissue engineering
Department of Bioengineering, U. O. P., Vega, S., Kwon, M., & Burdick, J. (2017) · European Cells and Materials · doi:10.22203/ecm.v033a05 · Cited by 307
Laser-guided direct writing of living cells
Odde, D. J., & Renn, M. J. (2000) · Biotechnology and Bioengineering · doi:10.1002/(sici)1097-0290(20000205)67:3<312::aid-bit7>3.0.co;2-f · Cited by 297
Laser Printing of Stem Cells for Biofabrication of Scaffold-Free Autologous Grafts
Gruene, M., Deiwick, A., Koch, L., Schlie, S., Unger, C., Hofmann, N., Bernemann, I., Glasmacher, B., & Chichkov, B. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2010.0359 · Cited by 286
Direct 3D cell-printing of human skin with functional transwell system
Kim, B. S., Lee, J.-S., Gao, G., & Cho, D.-W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa71c8 · Cited by 282
Keriquel, V., Guillemot, F., Arnault, I., Guillotin, B., Miraux, S., Amédée, J., Fricain, J.-C., & Catros, S. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014101 · Cited by 280
Three-Dimensional Bioprinting for Regenerative Dentistry and Craniofacial Tissue Engineering
Obregon, F., Vaquette, C., Ivanovski, S., Hutmacher, D. W., & Bertassoni, L. E. (2015) · Journal of Dental Research · doi:10.1177/0022034515588885 · Cited by 242
Controlled Positioning of Cells in Biomaterials—Approaches Towards 3D Tissue Printing
Wüst, S., Müller, R., & Hofmann, S. (2011) · Journal of Functional Biomaterials · doi:10.3390/jfb2030119 · Cited by 231
Gu, Q., Tomaskovic‐Crook, E., Wallace, G. G., & Crook, J. M. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700175 · Cited by 228
Cell-Seeding Techniques in Vascular Tissue Engineering
Villalona, G. A., Udelsman, B., Duncan, D. R., McGillicuddy, E., Sawh-Martinez, R. F., Hibino, N., Painter, C., Mirensky, T., Erickson, B., Shinoka, T., et al. (2010) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2009.0527 · Cited by 219
Park, J. Y., Choi, J.-C., Shim, J.-H., Lee, J.-S., Park, H., Kim, S. W., Doh, J., & Cho, D.-W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035004 · Cited by 213
Visible light crosslinkable chitosan hydrogels for tissue engineering
Hu, J., Hou, Y., Park, H., Choi, B., Hou, S., Chung, A., & Lee, M. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.01.029 · Cited by 212
Fabrication and characterization of bio-engineered cardiac pseudo tissues
Xu, T., Baicu, C., Aho, M., Zile, M., & Boland, T. (2009) · Biofabrication · doi:10.1088/1758-5082/1/3/035001 · Cited by 211
Morris, V. B., Nimbalkar, S., Younesi, M., McClellan, P., & Akkus, O. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1643-1 · Cited by 207
Bioprinting of tissue engineering scaffolds
Rider, P., Kačarević, Ž. P., Alkildani, S., Retnasingh, S., & Barbeck, M. (2018) · Journal of Tissue Engineering · doi:10.1177/2041731418802090 · Cited by 203
Self-citationZhai, X., Ruan, C., Ma, Y., Cheng, D., Wu, M., Liu, W., Zhao, X., Pan, H., & Lu, W. W. (2018) · Advanced Science · doi:10.1002/advs.201700550 · Cited by 199
The design, mechanism and biomedical application of self-healing hydrogels
Li, Q., Liu, C., Wen, J., Wu, Y., Shan, Y., & Liao, J. (2017) · Chinese Chemical Letters · doi:10.1016/j.cclet.2017.05.007 · Cited by 196
Bioprinting of biomimetic skin containing melanocytes
Min, D., Lee, W., Bae, I., Lee, T. R., Croce, P., & Yoo, S. (2018) · Experimental Dermatology · doi:10.1111/exd.13376 · Cited by 188
Composition of cell‐polymer cartilage implants
Freed, L. E., Marquis, J. C., Langer, R., Vunjak‐Novakovic, G., & Emmanual, J. (1994) · Biotechnology and Bioengineering · doi:10.1002/bit.260430710 · Cited by 179
Concise Review: Bioprinting of Stem Cells for Transplantable Tissue Fabrication
Leberfinger, A. N., Ravnic, D. J., Dhawan, A., & Ozbolat, I. T. (2017) · Stem Cells Translational Medicine · doi:10.1002/sctm.17-0148 · Cited by 175
Advances in cell culture: anchorage dependence
Merten, O.-W. (2015) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2014.0040 · Cited by 171
Marchioli, G., van Gurp, L., van Krieken, P. P., Stamatialis, D., Engelse, M., van Blitterswijk, C. A., Karperien, M. B. J., de Koning, E., Alblas, J., Moroni, L., et al. (2015) · Biofabrication · doi:10.1088/1758-5090/7/2/025009 · Cited by 170
Castilho, M., Hochleitner, G., Wilson, W., van Rietbergen, B., Dalton, P. D., Groll, J., Malda, J., & Ito, K. (2018) · Scientific Reports · doi:10.1038/s41598-018-19502-y · Cited by 169
High‐Resolution Projection Microstereolithography for Patterning of Neovasculature
Raman, R., Bhaduri, B., Mir, M., Shkumatov, A., Lee, M. K., Popescu, G., Kong, H., & Bashir, R. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500721 · Cited by 159
Villa, M. M., Wang, L., Huang, J., Rowe, D. W., & Wei, M. (2015) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33225 · Cited by 158
Yanez, M., Rincon, J., Dones, A., De Maria, C., Gonzales, R., & Boland, T. (2015) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0561 · Cited by 158
Tissue and Organ 3D Bioprinting
Xia, Z., Jin, S., & Ye, K. (2018) · SLAS TECHNOLOGY · doi:10.1177/2472630318760515 · Cited by 149
Recent development and biomedical applications of self-healing hydrogels
Wang, Y., Adokoh, C. K., & Narain, R. (2017) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2017.1360865 · Cited by 147
Bae, S.-W., Lee, K.-W., Park, J.-H., Lee, J. H., Jung, C., Yu, J., Kim, H., & Kim, D. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19061624 · Cited by 136
Kosik‐Kozioł, A., Costantini, M., Bolek, T., Szöke, K., Barbetta, A., Brinchmann, J. E., & Święszkowski, W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa90d7 · Cited by 118
Gelatin methacrylamide hydrogel with graphene nanoplatelets for neural cell-laden 3D bioprinting
Zhu, W., Harris, B. T., & Zhang, L. G. (2016) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/embc.2016.7591649 · Cited by 114
Layer-by-Layer Tissue Microfabrication Supports Cell Proliferation In Vitro and In Vivo
Catros, S., Guillemot, F., Nandakumar, A., Ziane, S., Moroni, L., Habibović, P., van Blitterswijk, C., Rousseau, B., Chassande, O., Amédée, J., et al. (2011) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2011.0382 · Cited by 113
Inkjet printing Schwann cells and neuronal analogue NG108-15 cells
Tse, C., Whiteley, R., Yu, T., Stringer, J., MacNeil, S., Haycock, J. W., & Smith, P. J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015017 · Cited by 110
Advances in bioprinted cell-laden hydrogels for skin tissue engineering
Pereira, R. F., Sousa, A., Barrias, C. C., Bayat, A., Granja, P. L., & Bártolo, P. (2017) · Biomanufacturing Reviews · doi:10.1007/s40898-017-0003-8 · Cited by 106
Additive Manufacturing for Guided Bone Regeneration: A Perspective for Alveolar Ridge Augmentation
Rider, P., Kačarević, Ž. P., Alkildani, S., Retnasingh, S., Schnettler, R., & Barbeck, M. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19113308 · Cited by 102
Self-citationKawecki, F., Clafshenkel, W. P., Auger, F. A., Bourget, J.-M., Fradette, J., & Devillard, R. (2018) · Biofabrication · doi:10.1088/1758-5090/aabd5b · Cited by 77
3D bioprinted biomask for facial skin reconstruction
Seol, Y., Lee, H., Copus, J. S., Kang, H., Cho, D., Atala, A., Lee, S. J., & Yoo, J. J. (2018) · Bioprinting · doi:10.1016/j.bprint.2018.e00028 · Cited by 76
Advances in interpenetrating polymer network hydrogels and their applications
Drăgan, E. S. (2014) · Pure and Applied Chemistry · doi:10.1515/pac-2014-0713 · Cited by 71
Biomimicry in biomedical research
Zhang, G. (2012) · Organogenesis · doi:10.4161/org.23395 · Cited by 59
Visible light-based stereolithography bioprinting of cell-adhesive gelatin hydrogels
Wang, Z., Tian, Z., Jin, X., Holzman, J. F., Ménard, F., & Kim, K. (2017) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/embc.2017.8037144 · Cited by 51
Hoffmann, A., Leonards, H., Tobies, N., Pongratz, L., Kreuels, K., Kreimendahl, F., Apel, C., Wehner, M. M., & Nottrodt, N. (2017) · Journal of Tissue Engineering · doi:10.1177/2041731417744485 · Cited by 42
Projection Stereolithographic Fabrication of BMP-2 Gene-activated Matrix for Bone Tissue Engineering
Lin, H., Tang, Y. M., Lozito, T. P., Oyster, N. M., Kang, R. B., Fritch, M. R., Wang, B., & Tuan, R. S. (2017) · Scientific Reports · doi:10.1038/s41598-017-11051-0 · Cited by 38
Micro-Arrayed Human Embryonic Stem Cells-Derived Cardiomyocytes for In Vitro Functional Assay
Serena, E., Cimetta, E., Zatti, S., Zaglia, T., Zagallo, M., Keller, G. M., & Elvassore, N. (2012) · PLoS ONE · doi:10.1371/journal.pone.0048483 · Cited by 34
Kraut, G., Yenchesky, L., Prieto, F., Tovar, G. E. M., & Southan, A. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45083 · Cited by 31
Iwanaga, S., Arai, K., & Nakamura, M. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800972-7.00004-9 · Cited by 30
Laser-based fabrication of 3D hydrogel constructs using bessel beams
Liew, W. L. A., & Zhang, Y. (2018) · Bioprinting · doi:10.1016/j.bprint.2018.02.004 · Cited by 19
Exposure of 3T3 mouse Fibroblasts and Collagen to High Intensity Blue Light
Smith, S., Maclean, M., MacGregor, S. J., Anderson, J. G., & Grant, M. H. (2009) · World Congress on Medical Physics and Biomedical Engineering, September 7 - 12, 2009, Munich, Germany · doi:10.1007/978-3-540-92841-6_333 · Cited by 15
Zhai, X., Ruan, C., Ma, Y., Cheng, D., Wu, M., Liu, W., Zhao, X., Pan, H., & Lu, W. W. (2018) · Advanced Science · doi:10.1002/advs.201870013 · Cited by 7
Cited by
A Comparative Review of Natural and Synthetic Biopolymer Composite Scaffolds
Reddy, M. S. B., Ponnamma, D., Choudhary, R., & Sadasivuni, K. K. (2021) · Polymers · doi:10.3390/polym13071105 · Cited by 1,104
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
Three-dimensional in vitro culture models in oncology research
Jubelin, C., Muñoz-Garcia, J., Griscom, L., Cochonneau, D., Ollivier, E., Heymann, M.-F., Vallette, F. M., Oliver, L., & Heymann, D. (2022) · Cell & Bioscience · doi:10.1186/s13578-022-00887-3 · Cited by 264
3D Printing of cultured meat products
K. Handral, H., Hua Tay, S., Wan Chan, W., & Choudhury, D. (2022) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2020.1815172 · Cited by 216
Choi, G., & Cha, H. J. (2019) · Biomaterials Research · doi:10.1186/s40824-019-0168-8 · Cited by 80
Metadata
- Authors
- Kačarević, Ž. P., Rider, P. M., Alkildani, S., Retnasingh, S., Smeets, R., Jung, O., Ivanišević, Z., & Barbeck, M.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2018-11-06
- Volume
- 11
- Issue
- 11
- Pages
- 2199
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2900445750
- Cited by
- 479
- References
- 105
- FWCI
- 11.51
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.