The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Active Materials for Functional Origami
Abstract
In recent decades, origami has been explored to aid in the design of engineering structures. These structures span multiple scales and have been demonstrated to be used toward various areas such as aerospace, metamaterial, biomedical, robotics, and architectural applications. Conventionally, origami or deployable structures have been actuated by hands, motors, or pneumatic actuators, which can result in heavy or bulky structures. On the other hand, active materials, which reconfigure in response to external stimulus, eliminate the need for external mechanical loads and bulky actuation systems. Thus, in recent years, active materials incorporated with deployable structures have shown promise for remote actuation of light weight, programmable origami. In this review, active materials such as shape memory polymers (SMPs) and alloys (SMAs), hydrogels, liquid crystal elastomers (LCEs), magnetic soft materials (MSMs), and covalent adaptable network (CAN) polymers, their actuation mechanisms, as well as how they have been utilized for active origami and where these structures are applicable is discussed. Additionally, the state‐of‐the‐art fabrication methods to construct active origami are highlighted. The existing structural modeling strategies for origami, the constitutive models used to describe active materials, and the largest challenges and future directions for active origami research are summarized.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Silica-Like Malleable Materials from Permanent Organic Networks
Montarnal, D., Capelot, M., Tournilhac, F., & Leibler, L. (2011) · Science · doi:10.1126/science.1212648 · Cited by 3,625
A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials
Arruda, E. M., & Boyce, M. C. (1993) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(93)90013-6 · Cited by 3,239 · cited 1×
“Some specific forms of Ψstretch are available, such as neoHookean,[437] Arruda-Boyce,[438] Ogden,[439] etc.”
MethodSydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Zhao, Q., Qi, H. J., & Xie, T. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.001 · Cited by 1,409
Self-citationTunable polymer multi-shape memory effect
Xie, T. (2010) · Nature · doi:10.1038/nature08863 · Cited by 1,380
Covalent Adaptable Networks (CANs): A Unique Paradigm in Cross-Linked Polymers
Kloxin, C. J., Scott, T. F., Adzima, B. J., & Bowman, C. N. (2010) · Macromolecules · doi:10.1021/ma902596s · Cited by 1,175 · cited 4×
“adaptable networks [285] and developed the first known light-triggered bond exchange”
BackgroundInfluentialLiquid crystalline elastomers as actuators and sensors
Ohm, C., Brehmer, M., & Zentel, R. (2010) · Advanced Materials · doi:10.1002/adma.200904059 · Cited by 1,169
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Liu, X., Liu, J., Lin, S., & Zhao, X. (2020) · Materials Today · doi:10.1016/j.mattod.2019.12.026 · Cited by 1,023
Using origami design principles to fold reprogrammable mechanical metamaterials
Silverberg, J. L., Evans, A. A., McLeod, L., Hayward, R. C., Hull, T., Santangelo, C. D., & Cohen, I. (2014) · Science · doi:10.1126/science.1252876 · Cited by 1,011
Multifunctional Shape‐Memory Polymers
Behl, M., Razzaq, M. Y., & Lendlein, A. (2010) · Advanced Materials · doi:10.1002/adma.200904447 · Cited by 971
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Self-citation3D printing of liquid crystal elastomeric actuators with spatially programed nematic order
Kotikian, A., Truby, R. L., Boley, J. W., White, T. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706164 · Cited by 768
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Self-citationLiquid crystal elastomers with mechanical properties of a muscle
Thomsen, D. L., Keller, P., Naciri, J., Pink, R., Jeon, H., Shenoy, D., & Ratna, B. R. (2001) · Macromolecules · doi:10.1021/ma001639q · Cited by 689
Programmable matter by folding
Hawkes, E., An, B., Benbernou, N. M., Tanaka, H., Kim, S., Demaine, E. D., Rus, D., & Wood, R. J. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0914069107 · Cited by 658
Feig, V. R., Tran, H., Lee, M., & Bao, Z. (2018) · Nature Communications · doi:10.1038/s41467-018-05222-4 · Cited by 585
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
Self-folding of polymer sheets using local light absorption
Liu, Y., Boyles, J. K., Genzer, J., & Dickey, M. D. (2012) · Soft Matter · doi:10.1039/c1sm06564e · Cited by 523
Shape memory polymer network with thermally distinct elasticity and plasticity
Zhao, Q., Zou, W., Luo, Y., & Xie, T. (2016) · Science Advances · doi:10.1126/sciadv.1501297 · Cited by 514
Four-dimensional printing of liquid crystal elastomers
Ambulo, C. P., Burroughs, J. J., Boothby, J. M., Kim, H., Shankar, M. R., & Ware, T. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11851 · Cited by 508
Jin, B., Song, H., Jiang, R., Song, J., Zhao, Q., & Xie, T. (2018) · Science Advances · doi:10.1126/sciadv.aao3865 · Cited by 497
Reversible bidirectional shape-memory polymers
Behl, M., Kratz, K., Zotzmann, J., Nöchel, U., & Lendlein, A. (2013) · Advanced Materials · doi:10.1002/adma.201300880 · Cited by 496
Kumpfer, J. R., & Rowan, S. J. (2011) · Journal of the American Chemical Society · doi:10.1021/ja205332w · Cited by 487
Programming curvature using origami tessellations
Dudte, L. H., Vouga, E., Tachi, T., & Mahadevan, L. (2016) · Nature Materials · doi:10.1038/nmat4540 · Cited by 486
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
Origami-inspired active structures: a synthesis and review
Peraza-Hernandez, E. A., Hartl, D. J., Malak Jr, R. J., & Lagoudas, D. C. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094001 · Cited by 421 · cited 1×
“to active origami.[1, 30-36] These origami systems actuated by stimuli-responsive materials have the”
BackgroundMulti-shape active composites by 3D printing of digital shape memory polymers
Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24224 · Cited by 399
Self-citationMorphable 3D mesostructures and microelectronic devices by multistable buckling mechanics
Fu, H., Nan, K., Bai, W., Huang, W., Bai, K., Lu, L., Zhou, C., Liu, Y., Liu, F., Wang, J., et al. (2018) · Nature Materials · doi:10.1038/s41563-017-0011-3 · Cited by 393
3D printed reversible shape changing components with stimuli responsive materials
Mao, Y., Ding, Z., Yuan, C., Ai, S., Isakov, M., Wu, J., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24761 · Cited by 348
Self-citationBehl, M., & Lendlein, A. (2007) · Soft Matter · doi:10.1039/b610611k · Cited by 321
3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers
Yuan, C., Roach, D. J., Dunn, C. K., Mu, Q., Kuang, X., Yakacki, C. M., Wang, T. J., Yu, K., & Qi, H. J. (2017) · Soft Matter · doi:10.1039/c7sm00759k · Cited by 300 · cited 11×
“Recently, this approach was further developed by simply using an SMP/hydrogel bilayer to enable reversible shape change by Yuan et al. [205] Magnetic particles have also been used to establish similar functionality in SMPs.”
BackgroundMethodInfluentialSelf-citationOrigami by Frontal Photopolymerization
Zhao, Z., Wu, J., Mu, X., Chen, H., Qi, H. J., & Fang, D. (2017) · Science Advances · doi:10.1126/sciadv.1602326 · Cited by 256 · cited 5×
“Note that with the above Helmholtz free energy, Zhao et al. [458] derived the constitutive relation for the stress of hard-MSMs, which has been implemented into ABAQUS through the user element (UEL) subroutine.”
MethodInfluentialSelf-citationRegional Shape Control of Strategically Assembled Multishape Memory Vitrimers
Pei, Z., Yang, Y., Chen, Q., Wei, Y., & Ji, Y. (2016) · Advanced Materials · doi:10.1002/adma.201503789 · Cited by 250
Three-dimensional electronic microfliers inspired by wind-dispersed seeds
Kim, B. H., Li, K., Kim, J.-T., Park, Y., Jang, H., Wang, X., Xie, Z., Won, S. M., Yoon, H.-J., Lee, G., et al. (2021) · Nature · doi:10.1038/s41586-021-03847-y · Cited by 242
Liu, Y., Li, Y., Yang, G., Zheng, X., & Zhou, S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5081056 · Cited by 214
Shapeshifting: Reversible shape memory in semicrystalline elastomers
Zhou, J., Turner, S. A., Brosnan, S. M., Li, Q., Carrillo, J.-M. Y., Nykypanchuk, D., Gang, O., Ashby, V. S., Dobrynin, A. V., & Sheiko, S. S. (2014) · Macromolecules · doi:10.1021/ma4023185 · Cited by 209
Desolvation Induced Origami of Photocurable Polymers by Digit Light Processing
Zhao, Z., Wu, J., Mu, X., Chen, H., Qi, H. J., & Fang, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600625 · Cited by 153
Self-citationTwo-way reversible shape memory effects in a free-standing polymer composite
Westbrook, K. K., Mather, P. T., Parakh, V., Dunn, M. L., Ge, Q., Lee, B. M., & Qi, H. J. (2011) · Smart Materials and Structures · doi:10.1088/0964-1726/20/6/065010 · Cited by 149
Self-citationA Review on Origami Simulations: From Kinematics, To Mechanics, Toward Multiphysics
Zhu, Y., Schenk, M., & Filipov, E. T. (2022) · Applied Mechanics Reviews · doi:10.1115/1.4055031 · Cited by 144
Dual-responsive, shape-switching bilayers enabled by liquid crystal elastomers
Boothby, J. M., & Ware, T. H. (2017) · Soft Matter · doi:10.1039/c7sm00541e · Cited by 127
Photocrosslinkable liquid crystal main-chain polymers: Thin films and electrospinning
Krause, S., Dersch, R., Wendorff, J. H., & Finkelmann, H. (2007) · Macromolecular Rapid Communications · doi:10.1002/marc.200700460 · Cited by 108
3D printing of tunable shape memory polymer blends
Chen, S., Zhang, Q., & Feng, J. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc02534c · Cited by 80 · cited 1×
“shapes.[137, 379-381] In addition, tuning of printing parameters can be used to introduce the”
Metadata
- Authors
- Leanza, S., Wu, S., Sun, X., Qi, H. J., & Zhao, R. R.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2023-12-12
- Volume
- 36
- Issue
- 9
- Pages
- e2302066-e2302066
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4367549670
- Cited by
- 169
- References
- 43
- FWCI
- 16.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.