The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Potential of ceramic materials as permanently implantable skeletal prostheses
Abstract
The feasibility of the use of porous ceramic materials in the permanent repair of skeletal defects was studied from the standpoint of physiological compatibility and in growth of natural bone. High‐fired calcium aluminate samples in the form of quarter‐inch diameter cylindrical pellets containing interconnecting porous networks were implanted in vivo into canine femurs for 4‐, 11‐, and 22‐week periods. The implants had 65% porosity with pore size falling within one of five distinct ranges from less than 45 μ to about 200 μ in diameter. Thin sections were prepared by grinding (poly) methyl methacrylate‐mounted cross sections of the femurs containing the implanted ceramic samples and adjacent soft tissues. Tissue‐prosthetic compatibility was determined using standard histological thin section procedures, electron microbeam probe examinations, autoradiographic techniques, microfadiographic techniques, microchemistry techniques, and ultra‐violet fluorescent techniques. Optical microscopic evaluations of each section showed the ceramic samples to be bound lightly by natural bone and gave no detectable signs of tissue incompatibility. Minimum pore size for significant ingrowth of natural bone was indicated to be between 75 and 100 μ.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Quantitative Microradiographic Studies of Normal and Osteoporotic Bone
JOWSEY, J., KELLY, P. J., RIGGS, B. L., BIANCO, A. J., SCHOLZ, D. A., & GERSHON-COHEN, J. (1965) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-196547040-00014 · Cited by 362
Cited by
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
Geetha, M., Singh, A. K., Asokamani, R., & Gogia, A. K. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.06.004 · Cited by 5,416
Murphy, C. M., Haugh, M. G., & O'Brien, F. J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.063 · Cited by 2,056
Bioactive glass in tissue engineering
Rahaman, M. N., Day, D. E., Sonny Bal, B., Fu, Q., Jung, S. B., Bonewald, L. F., & Tomsia, A. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.03.016 · Cited by 1,794
Tissue-engineered bone regeneration
Petite, H., Viateau, V., Bensaïd, W., Meunier, A., de Pollak, C., Bourguignon, M., Oudina, K., Sedel, L., & Guillemin, G. (2000) · Nature Biotechnology · doi:10.1038/79449 · Cited by 1,475
Bioceramics of calcium orthophosphates
Dorozhkin, S. V. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.11.050 · Cited by 1,338
3D bioactive composite scaffolds for bone tissue engineering
Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,332
Role of material surfaces in regulating bone and cartilage cell response
Boyan, B. D., Hummert, T. W., Dean, D. D., & Schwartz, Z. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85758-9 · Cited by 1,331
Sol–gel based materials for biomedical applications
Owens, G. J., Singh, R. K., Foroutan, F., Alqaysi, M., Han, C.-M., Mahapatra, C., Kim, H.-W., & Knowles, J. C. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.12.001 · Cited by 958
Scaffold Design for Bone Regeneration
Polo-Corrales, L., Latorre-Esteves, M., & Ramirez-Vick, J. E. (2014) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2014.9127 · Cited by 945
Recent advances in biomaterials for 3D scaffolds: A review
Nikolova, M. P., & Chavali, M. S. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.10.005 · Cited by 907
“44 and 44–75 μm enable accommodation only of fibrous tissue [11].”
BackgroundBone Regeneration Based on Tissue Engineering Conceptions — A 21st Century Perspective
Henkel, J., Woodruff, M. A., Epari, D. R., Steck, R., Glatt, V., Dickinson, I. C., Choong, P. F. M., Schuetz, M. A., & Hutmacher, D. W. (2013) · Bone Research · doi:10.4248/br201303002 · Cited by 907
Calcium phosphates in biomedical applications: materials for the future?
Habraken, W., Habibovic, P., Epple, M., & Bohner, M. (2016) · Materials Today · doi:10.1016/j.mattod.2015.10.008 · Cited by 857
Synthetic bone graft substitutes
Moore, W. R., Graves, S. E., & Bain, G. I. (2001) · ANZ Journal of Surgery · doi:10.1046/j.1440-1622.2001.02128.x · Cited by 826
Scaffolds and cells for tissue regeneration: different scaffold pore sizes—different cell effects
Bružauskaitė, I., Bironaitė, D., Bagdonas, E., & Bernotienė, E. (2016) · Cytotechnology · doi:10.1007/s10616-015-9895-4 · Cited by 797
Tissue Engineering: Orthopedic Applications
Laurencin, C. T., Ambrosio, A. M. A., Borden, M. D., & Cooper, J. A. (1999) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.1.1.19 · Cited by 752
Oh, S. H., Park, I. K., Kim, J. M., & Lee, J. H. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.11.024 · Cited by 713
Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives
Fu, Q., Saiz, E., Rahaman, M. N., & Tomsia, A. P. (2011) · Materials Science and Engineering: C · doi:10.1016/j.msec.2011.04.022 · Cited by 703
Osteoinduction of bone grafting materials for bone repair and regeneration
García-Gareta, E., Coathup, M. J., & Blunn, G. W. (2015) · Bone · doi:10.1016/j.bone.2015.07.007 · Cited by 649
Understanding the effect of mean pore size on cell activity in collagen-glycosaminoglycan scaffolds
Murphy, C. M., & O’Brien, F. J. (2010) · Cell Adhesion & Migration · doi:10.4161/cam.4.3.11747 · Cited by 641
A three-dimensional osteochondral composite scaffold for articular cartilage repair
Sherwood, J. K., Riley, S. L., Palazzolo, R., Brown, S. C., Monkhouse, D. C., Coates, M., Griffith, L. G., Landeen, L. K., & Ratcliffe, A. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00223-5 · Cited by 610
Stem cell technology and bioceramics: From cell to gene engineering
Ohgushi, H., & Caplan, A. I. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(1999)48:6<913::aid-jbm22>3.0.co;2-0 · Cited by 566
Modern biomaterials: a review—bulk properties and implications of surface modifications
Roach, P., Eglin, D., Rohde, K., & Perry, C. C. (2007) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-006-0064-3 · Cited by 562
How smart do biomaterials need to be? A translational science and clinical point of view
Holzapfel, B. M., Reichert, J. C., Schantz, J.-T., Gbureck, U., Rackwitz, L., Nöth, U., Jakob, F., Rudert, M., Groll, J., & Hutmacher, D. W. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.07.009 · Cited by 552
Kim, H.-W., Knowles, J. C., & Kim, H.-E. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.07.003 · Cited by 518
Osteoinduction in porous hydroxyapatite implanted in heterotopic sites of different animal models
Ripamonti, U. (1996) · Biomaterials · doi:10.1016/0142-9612(96)80752-6 · Cited by 499
Hollander, D. A., von Walter, M., Wirtz, T., Sellei, R., Schmidt-Rohlfing, B., Paar, O., & Erli, H.-J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.041 · Cited by 482
Improving biocompatibility for next generation of metallic implants
Bandyopadhyay, A., Mitra, I., Goodman, S. B., Kumar, M., & Bose, S. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101053 · Cited by 463
Bone grafting, orthopaedic biomaterials, and the clinical need for bone engineering
Brydone, A. S., Meek, D., & Maclaine, S. (2010) · Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine · doi:10.1243/09544119jeim770 · Cited by 456
Hannink, G., & Arts, J. J. C. (2011) · Injury · doi:10.1016/j.injury.2011.06.008 · Cited by 444
Mullen, L., Stamp, R. C., Brooks, W. K., Jones, E., & Sutcliffe, C. J. (2009) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31219 · Cited by 410
Fielding, G. A., Bandyopadhyay, A., & Bose, S. (2012) · Dental Materials · doi:10.1016/j.dental.2011.09.010 · Cited by 401
Design, Materials, and Mechanobiology of Biodegradable Scaffolds for Bone Tissue Engineering
Velasco, M. A., Narváez-Tovar, C. A., & Garzón-Alvarado, D. A. (2015) · BioMed Research International · doi:10.1155/2015/729076 · Cited by 395
Pore diameter of more than 100 μm is not requisite for bone ingrowth in rabbits
Itälä, A. I., Ylänen, H. O., Ekholm, C., Karlsson, K. H., & Aro, H. T. (2001) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1069 · Cited by 379
Bioceramic Bone Graft Substitutes: Influence of Porosity and Chemistry
Hing, K. A. (2005) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2005.02020.x · Cited by 365
Tarafder, S., Balla, V. K., Davies, N. M., Bandyopadhyay, A., & Bose, S. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.555 · Cited by 364
Pharmaceutical electrospinning and 3D printing scaffold design for bone regeneration
Wang, Z., Wang, Y., Yan, J., Zhang, K., Lin, F., Xiang, L., Deng, L., Guan, Z., Cui, W., & Zhang, H. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.05.007 · Cited by 344
Kasten, P., Beyen, I., Niemeyer, P., Luginbühl, R., Bohner, M., & Richter, W. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.05.017 · Cited by 336
Design of ceramic-based cements and putties for bone graft substitution
RMS Foundation, C.-2. B., & Bohner, M. (2010) · European Cells and Materials · doi:10.22203/ecm.v020a01 · Cited by 327
3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration
Rosenzweig, D., Carelli, E., Steffen, T., Jarzem, P., & Haglund, L. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms160715118 · Cited by 326
Osteoinduction by biomaterials—Physicochemical and structural influences
Habibovic, P., Sees, T. M., van den Doel, M. A., van Blitterswijk, C. A., & de Groot, K. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30712 · Cited by 315
Nanostructured polymer scaffolds for tissue engineering and regenerative medicine
Smith, I. O., Liu, X. H., Smith, L. A., & Ma, P. X. (2009) · WIREs Nanomedicine and Nanobiotechnology · doi:10.1002/wnan.26 · Cited by 314
Vascularized Bone Tissue Engineering: Approaches for Potential Improvement
Nguyen, L. H., Annabi, N., Nikkhah, M., Bae, H., Binan, L., Park, S., Kang, Y., Yang, Y., & Khademhosseini, A. (2012) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0012 · Cited by 313
Cell-scaffold interactions in the bone tissue engineering triad
Orthopaedic Research and Biotechnology, R. B., Murphy, C., O’Brien, F., Little, D., & Schindeler, A. (2013) · European Cells and Materials · doi:10.22203/ecm.v026a09 · Cited by 312
Engineering vascularized and innervated bone biomaterials for improved skeletal tissue regeneration
Marrella, A., Lee, T. Y., Lee, D. H., Karuthedom, S., Syla, D., Chawla, A., Khademhosseini, A., & Jang, H. L. (2018) · Materials Today · doi:10.1016/j.mattod.2017.10.005 · Cited by 311
Fu, Q., Rahaman, M. N., Sonny Bal, B., Brown, R. F., & Day, D. E. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.04.019 · Cited by 302
Design of artificial extracellular matrices for tissue engineering
Kim, B.-S., Park, I.-K., Hoshiba, T., Jiang, H.-L., Choi, Y.-J., Akaike, T., & Cho, C.-S. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.10.001 · Cited by 296
Comparative performance of three ceramic bone graft substitutes
Hing, K. A., Wilson, L. F., & Buckland, T. (2007) · The Spine Journal · doi:10.1016/j.spinee.2006.07.017 · Cited by 287
A review of 3D printed porous ceramics
Zhang, F., Li, Z., Xu, M., Wang, S., Li, N., & Yang, J. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.02.039 · Cited by 284
Kujala, S., Ryhänen, J., Danilov, A., & Tuukkanen, J. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00359-4 · Cited by 284
Roosa, S. M. M., Kemppainen, J. M., Moffitt, E. N., Krebsbach, P. H., & Hollister, S. J. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32381 · Cited by 283
Cell-free and cell-based approaches for bone regeneration
Bueno, E. M., & Glowacki, J. (2009) · Nature Reviews Rheumatology · doi:10.1038/nrrheum.2009.228 · Cited by 279
Calcium Orthophosphates as Bioceramics: State of the Art
Dorozhkin, S. V. (2010) · Journal of Functional Biomaterials · doi:10.3390/jfb1010022 · Cited by 278
Gelatin methacryloyl hydrogel, from standardization, performance, to biomedical application
He, J., Sun, Y., Gao, Q., He, C., Yao, K., Wang, T., Xie, M., Yu, K., Nie, J., Chen, Y., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300395 · Cited by 275
Srinivasan, S., Jayasree, R., Chennazhi, K. P., Nair, S. V., & Jayakumar, R. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.07.058 · Cited by 273
Functional Biomaterials for Bone Regeneration: A Lesson in Complex Biology
Armiento, A. R., Hatt, L. P., Sanchez Rosenberg, G., Thompson, K., & Stoddart, M. J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909874 · Cited by 273
van Tienen, T. G., Heijkants, R. G. J. C., Buma, P., de Groot, J. H., Pennings, A. J., & Veth, R. P. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00280-0 · Cited by 270
Kao, S. T., & Scott, D. D. (2007) · Oral and Maxillofacial Surgery Clinics of North America · doi:10.1016/j.coms.2007.06.002 · Cited by 263
Hernandez, J. L., & Woodrow, K. A. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202102087 · Cited by 259
Lee, D. J., Kwon, J., Kim, Y., Wang, X., Wu, T., Lee, Y., Kim, S., Miguez, P., & Ko, C. (2019) · Orthodontics & Craniofacial Research · doi:10.1111/ocr.12261 · Cited by 86
Liu, Z., Tamaddon, M., Gu, Y., Yu, J., Xu, N., Gang, F., Sun, X., & Liu, C. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00104 · Cited by 37
“Some researchers suggest that 100–400-μm pore sizes are optimal for bone tissue regeneration (Hulbert et al., 1970; Schliephake et al., 1991; Bloebaum et al., 1994).”
BackgroundCharacterization of bending behavior of hydroxyapatite/biopolymer porous composite beams
Hazwani, F., & Todo, M. (2021) · Composites Communications · doi:10.1016/j.coco.2021.100747 · Cited by 15
Metadata
- Authors
- Hulbert, S. F., Young, F. A., Mathews, R. S., Klawitter, J. J., Talbert, C. D., & Stelling, F. H.
- Venue
- Journal of Biomedical Materials Research
- Publisher
- Wiley
- Published
- 1970-09
- Volume
- 4
- Issue
- 3
- Pages
- 433-456
- ISSN
- 0021-9304 (ISSN-L)
- 1097-4636
- OpenAlex
- W2113613856
- Cited by
- 1,019
- References
- 1
- FWCI
- 12.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.