The DOI matches its Crossref record; 124 of the 124 references it cites were found in a registry or an index.
Additive manufacturing techniques for the production of tissue engineering constructs
Open accessAbstract
'Additive manufacturing' (AM) refers to a class of manufacturing processes based on the building of a solid object from three-dimensional (3D) model data by joining materials, usually layer upon layer. Among the vast array of techniques developed for the production of tissue-engineering (TE) scaffolds, AM techniques are gaining great interest for their suitability in achieving complex shapes and microstructures with a high degree of automation, good accuracy and reproducibility. In addition, the possibility of rapidly producing tissue-engineered constructs meeting patient's specific requirements, in terms of tissue defect size and geometry as well as autologous biological features, makes them a powerful way of enhancing clinical routine procedures. This paper gives an extensive overview of different AM techniques classes (i.e. stereolithography, selective laser sintering, 3D printing, melt-extrusion-based techniques, solution/slurry extrusion-based techniques, and tissue and organ printing) employed for the development of tissue-engineered constructs made of different materials (i.e. polymeric, ceramic and composite, alone or in combination with bioactive agents), by highlighting their principles and technological solutions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
Exploring and Engineering the Cell Surface Interface
Stevens, M. M., & George, J. H. (2005) · Science · doi:10.1126/science.1106587 · Cited by 2,607
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
Organ printing: computer-aided jet-based 3D tissue engineering
Mironov, V., Boland, T., Trusk, T., Forgacs, G., & Markwald, R. R. (2003) · Trends in Biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,276
Mano, J. F., Silva, G. A., Azevedo, H. S., Malafaya, P. B., Sousa, R. A., Silva, S. S., Boesel, L. F., Oliveira, J. M., Santos, T. C., Marques, A. P., et al. (2007) · Journal of The Royal Society Interface · doi:10.1098/rsif.2007.0220 · Cited by 1,140
Hutmacher, D. W., Sittinger, M., & Risbud, M. V. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.05.005 · Cited by 1,121
Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,076
Polymeric materials for bone and cartilage repair
Puppi, D., Chiellini, F., Piras, A. M., & Chiellini, E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.006 · Cited by 913
Self-citationThree-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Guillotin, B., Souquet, A., Catros, S., Duocastella, M., Pippenger, B., Bellance, S., Bareille, R., Rémy, M., Bordenave, L., Amédée, J., et al. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.055 · Cited by 832
Synthetic polymer scaffolds for tissue engineering
Place, E. S., George, J. H., Williams, C. K., & Stevens, M. M. (2009) · Chemical Society Reviews · doi:10.1039/b811392k · Cited by 815
Application of inkjet printing to tissue engineering
Boland, T., Xu, T., Damon, B., & Cui, X. (2006) · Biotechnology Journal · doi:10.1002/biot.200600081 · Cited by 783
Three‐dimensional printing of porous ceramic scaffolds for bone tissue engineering
Seitz, H., Rieder, W., Irsen, S., Leukers, B., & Tille, C. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30291 · Cited by 742
Human microvasculature fabrication using thermal inkjet printing technology
Cui, X., & Boland, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.056 · Cited by 704
Automatic method for fabricating a three-dimensional plastic model with photo-hardening polymer
Kodama, H. (1981) · Review of Scientific Instruments · doi:10.1063/1.1136492 · Cited by 668
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Cheang, P., Abu Bakar, M. S., & Cha, S. W. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00131-5 · Cited by 625
Scaffold development using 3D printing with a starch-based polymer
Lam, C. X. F., Mo, X. M., Teoh, S. H., & Hutmacher, D. W. (2002) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(02)00012-7 · Cited by 614
Skin tissue generation by laser cell printing
Koch, L., Deiwick, A., Schlie, S., Michael, S., Gruene, M., Coger, V., Zychlinski, D., Schambach, A., Reimers, K., Vogt, P. M., et al. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24455 · Cited by 609
Sobral, J. M., Caridade, S. G., Sousa, R. A., Mano, J. F., & Reis, R. L. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.11.003 · Cited by 561
Moroni, L., de Wijn, J. R., & van Blitterswijk, C. A. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.023 · Cited by 534
Three-dimensional tissue fabrication
Liu Tsang, V., & Bhatia, S. N. (2004) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2004.05.001 · Cited by 519
Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing
Leukers, B., Gülkan, H., Irsen, S. H., Milz, S., Tille, C., Schieker, M., & Seitz, H. (2005) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-005-4716-5 · Cited by 499
Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing
Saunders, R. E., Gough, J. E., & Derby, B. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.032 · Cited by 495
High-throughput laser printing of cells and biomaterials for tissue engineering
Guillemot, F., Souquet, A., Catros, S., Guillotin, B., Lopez, J., Faucon, M., Pippenger, B., Bareille, R., Rémy, M., Bellance, S., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.029 · Cited by 475
Fedorovich, N. E., Alblas, J., de Wijn, J. R., Hennink, W. E., Verbout, A. J., & Dhert, W. J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0175 · Cited by 467 · cited 1×
“UV-crosslinked natural or synthetic hydrogels are often employed in combination with cells for the engineering of soft tissues, because of their ability to trigger cell responses and induce the formation of new tissue (Tsang and Bhatia, 2004; Fedorovich et al., 2007).”
BackgroundSkardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461
Butscher, A., Bohner, M., Hofmann, S., Gauckler, L., & Müller, R. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.039 · Cited by 459
Kim, S. S., Utsunomiya, H., Koski, J. A., Wu, B. M., Cima, M. J., Sohn, J., Mukai, K., Griffith, L. G., & Vacanti, J. P. (1998) · Annals of Surgery · doi:10.1097/00000658-199807000-00002 · Cited by 451
A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
Biological Laser Printing: A Novel Technique for Creating Heterogeneous 3-dimensional Cell Patterns
Barron, J. A., Wu, P., Ladouceur, H. D., & Ringeisen, B. R. (2004) · Biomedical Microdevices · doi:10.1023/b:bmmd.0000031751.67267.9f · Cited by 435
Duan, B., Wang, M., Zhou, W. Y., Cheung, W. L., Li, Z. Y., & Lu, W. W. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.06.024 · Cited by 420
Wiria, F. E., Leong, K. F., Chua, C. K., & Liu, Y. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.07.008 · Cited by 405
Dhariwala, B., Hunt, E., & Boland, T. (2004) · Tissue Engineering · doi:10.1089/1076327042500256 · Cited by 389
Lu, Y., Mapili, G., Suhali, G., Chen, S., & Roy, K. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30601 · Cited by 380
Fabrication of PLGA scaffolds using soft lithography and microsyringe deposition
Vozzi, G., Flaim, C., Ahluwalia, A., & Bhatia, S. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00052-8 · Cited by 373
Fu, Q., Saiz, E., & Tomsia, A. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.030 · Cited by 366
Tarafder, S., Balla, V. K., Davies, N. M., Bandyopadhyay, A., & Bose, S. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.555 · Cited by 364
Arcaute, K., Mann, B. K., & Wicker, R. B. (2006) · Annals of Biomedical Engineering · doi:10.1007/s10439-006-9156-y · Cited by 364
Recent development on computer aided tissue engineering — a review
Sun, W., & Lal, P. (2002) · Computer Methods and Programs in Biomedicine · doi:10.1016/s0169-2607(01)00116-x · Cited by 360
Yeong, W. Y., Sudarmadji, N., Yu, H. Y., Chua, C. K., Leong, K. F., Venkatraman, S. S., Boey, Y. C. F., & Tan, L. P. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.033 · Cited by 355
Toward engineering functional organ modules by additive manufacturing
Marga, F., Jakab, K., Khatiwala, C., Shepherd, B., Dorfman, S., Hubbard, B., Colbert, S., & Gabor, F. (2012) · Biofabrication · doi:10.1088/1758-5082/4/2/022001 · Cited by 348
Organ printing: from bioprinter to organ biofabrication line
Mironov, V., Kasyanov, V., & Markwald, R. R. (2011) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2011.02.006 · Cited by 343
Fab@Home: the personal desktop fabricator kit
Malone, E., & Lipson, H. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776197 · Cited by 322
Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography
Elomaa, L., Teixeira, S., Hakala, R., Korhonen, H., Grijpma, D. W., & Seppälä, J. V. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.039 · Cited by 311
Blends of Poly-(ε-caprolactone) and Polysaccharides in Tissue Engineering Applications
Ciardelli, G., Chiono, V., Vozzi, G., Pracella, M., Ahluwalia, A., Barbani, N., Cristallini, C., & Giusti, P. (2005) · Biomacromolecules · doi:10.1021/bm0500805 · Cited by 310
Fabrication of porous scaffolds for bone tissue engineering via low-temperature deposition
Xiong, Z. (2002) · Scripta Materialia · doi:10.1016/s1359-6462(02)00071-4 · Cited by 307
Sintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applications
Miranda, P., Saiz, E., Gryn, K., & Tomsia, A. P. (2006) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.02.004 · Cited by 304
Multi-material stereolithography
Choi, J.-W., Kim, H.-C., & Wicker, R. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.10.003 · Cited by 303
Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., & Guiberteau, F. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31587 · Cited by 301
Direct‐Write Assembly of 3D Hydrogel Scaffolds for Guided Cell Growth
Barry, R. A., Shepherd, R. F., Hanson, J. N., Nuzzo, R. G., Wiltzius, P., & Lewis, J. A. (2009) · Advanced Materials · doi:10.1002/adma.200803702 · Cited by 295
Laser Printing of Pluripotent Embryonal Carcinoma Cells
Ringeisen, B. R., Kim, H., Barron, J. A., Krizman, D. B., Chrisey, D. B., Jackman, S., Auyeung, R. Y. C., & Spargo, B. J. (2004) · Tissue Engineering · doi:10.1089/107632704323061843 · Cited by 295
Keriquel, V., Guillemot, F., Arnault, I., Guillotin, B., Miraux, S., Amédée, J., Fricain, J.-C., & Catros, S. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014101 · Cited by 280
Landers, R., & Mülhaupt, R. (2000) · Macromolecular Materials and Engineering · doi:10.1002/1439-2054(20001001)282:1<17::aid-mame17>3.0.co;2-8 · Cited by 261
Jet‐based methods to print living cells
Ringeisen, B. R., Othon, C. M., Barron, J. A., Young, D., & Spargo, B. J. (2006) · Biotechnology Journal · doi:10.1002/biot.200600058 · Cited by 249
Vozzi, G., Previti, A., De Rossi, D., & Ahluwalia, A. (2002) · Tissue Engineering · doi:10.1089/107632702320934182 · Cited by 249
Catros, S., Fricain, J.-C., Guillotin, B., Pippenger, B., Bareille, R., Remy, M., Lebraud, E., Desbat, B., Amédée, J., & Guillemot, F. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025001 · Cited by 245
Precision extruding deposition and characterization of cellular poly‐ε‐caprolactone tissue scaffolds
Wang, F., Shor, L., Darling, A., Khalil, S., Sun, W., Güçeri, S., & Lau, A. (2004) · Rapid Prototyping Journal · doi:10.1108/13552540410512525 · Cited by 241
Hydroxyapatite implants with designed internal architecture
Chu, T. G., Halloran, J. W., Hollister, S. J., et al. (2001) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1011203226053 · Cited by 236
3D Microperiodic Hydrogel Scaffolds for Robust Neuronal Cultures
Hanson Shepherd, J. N., Parker, S. T., Shepherd, R. F., Gillette, M. U., Lewis, J. A., & Nuzzo, R. G. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201001746 · Cited by 228
Gruene, M., Pflaum, M., Hess, C., Diamantouros, S., Schlie, S., Deiwick, A., Koch, L., Wilhelmi, M., Jockenhoevel, S., Haverich, A., et al. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0185 · Cited by 227
Drop-on-demand printing of cells and materials for designer tissue constructs
Boland, T., Tao, X., Damon, B. J., Manley, B., Kesari, P., Jalota, S., & Bhaduri, S. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.047 · Cited by 220
Direct write assembly of calcium phosphate scaffolds using a water-based hydrogel
Franco, J., Hunger, P., Launey, M. E., Tomsia, A. P., & Saiz, E. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.06.031 · Cited by 217
Low temperature direct 3D printed bioceramics and biocomposites as drug release matrices
Gbureck, U., Vorndran, E., Müller, F. A., & Barralet, J. E. (2007) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.06.022 · Cited by 213
3D Fiber‐Deposited Electrospun Integrated Scaffolds Enhance Cartilage Tissue Formation
Moroni, L., Schotel, R., Hamann, D., de Wijn, J. R., & van Blitterswijk, C. A. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200601158 · Cited by 205
Improving the compressive strength of bioceramic robocast scaffolds by polymer infiltration
Martínez-Vázquez, F. J., Perera, F. H., Miranda, P., Pajares, A., & Guiberteau, F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.05.024 · Cited by 204
Choi, J.-W., Wicker, R., Lee, S.-H., Choi, K.-H., Ha, C.-S., & Chung, I. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.05.004 · Cited by 200
Shor, L., Güçeri, S., Chang, R., Gordon, J., Kang, Q., Hartsock, L., An, Y., & Sun, W. (2009) · Biofabrication · doi:10.1088/1758-5082/1/1/015003 · Cited by 198
Ovsianikov, A., Schlie, S., Ngezahayo, A., Haverich, A., & Chichkov, B. N. (2007) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.57 · Cited by 194
Three-Dimensional Biodegradable Structures Fabricated by Two-Photon Polymerization
Claeyssens, F., Hasan, E. A., Gaidukeviciute, A., Achilleos, D. S., Ranella, A., Reinhardt, C., Ovsianikov, A., Shizhou, X., Fotakis, C., Vamvakaki, M., et al. (2009) · Langmuir · doi:10.1021/la803803m · Cited by 187
Selective laser sintering of hydroxyapatite/poly-ε-caprolactone scaffolds
Eosoly, S., Brabazon, D., Lohfeld, S., & Looney, L. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.07.018 · Cited by 186
Porous ceramic bone scaffolds for vascularized bone tissue regeneration
Will, J., Melcher, R., Treul, C., Travitzky, N., Kneser, U., Polykandriotis, E., Horch, R., & Greil, P. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3346-5 · Cited by 179
Rohner, D., Hutmacher, D. W., Cheng, T. K., Oberholzer, M., & Hammer, B. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10037 · Cited by 171
Wu, P. K., & Ringeisen, B. R. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014111 · Cited by 168
Duan, B., & Wang, M. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0127.focus · Cited by 166
Domingos, M., Chiellini, F., Gloria, A., Ambrosio, L., Bartolo, P., & Chiellini, E. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211193502 · Cited by 164
Self-citationKolan, K. C. R., Leu, M. C., Hilmas, G. E., Brown, R. F., & Velez, M. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025004 · Cited by 161
Rai, B., Lin, J., Lim, Z. X. H., Guldberg, R. E., Hutmacher, D. W., & Cool, S. M. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.07.001 · Cited by 157
Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification
Lan, P. X., Lee, J. W., Seol, Y., & Cho, D. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3567-2 · Cited by 154
Medical rapid prototyping applications and methods
Hieu, L. C., Zlatov, N., Sloten, J. V., Bohez, E. L. J., Khanh, L., Binh, P. H., Oris, P., & Toshev, Y. (2005) · Assembly Automation · doi:10.1108/01445150510626415 · Cited by 152
Russias, J., Saiz, E., Deville, S., Gryń, K., Liu, G., Nalla, R. K., & Tomsia, A. P. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31237 · Cited by 147
Kim, G., Ahn, S., Kim, Y.-Y., Cho, Y., & Chun, W. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03452e · Cited by 137
Shuai, C., Gao, C., Nie, Y. M., Hu, H., Zhou, Y., & Peng, S. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/28/285703 · Cited by 136
Jansen, J., Melchels, F. P. W., Grijpma, D. W., & Feijén, J. (2008) · Biomacromolecules · doi:10.1021/bm801001r · Cited by 136
Duan, B., Cheung, W. L., & Wang, M. (2011) · Biofabrication · doi:10.1088/1758-5082/3/1/015001 · Cited by 132
Mironov, V. A., Prestwich, G. D., & Forgács, G. (2007) · Journal of Materials Chemistry · doi:10.1039/b617903g · Cited by 130
Distinct Tissue Formation by Heterogeneous Printing of Osteo- and Endothelial Progenitor Cells
Fedorovich, N. E., Wijnberg, H. M., Dhert, W. J. A., & Alblas, J. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0019 · Cited by 128
Shanjani, Y., Croos, J. N. A. D., Pilliar, R. M., et al. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31610 · Cited by 121
Weiß, T., Hildebrand, G., Schade, R., & Liefeith, K. (2009) · Engineering in Life Sciences · doi:10.1002/elsc.200900002 · Cited by 121
Poly(lactic-co-glycolic acid) electrospun fibrous meshes for the controlled release of retinoic acid
Puppi, D., Piras, A. M., Detta, N., Dinucci, D., & Chiellini, E. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.015 · Cited by 117
Self-citationLee, J. W., Ahn, G., Kim, D. S., & Cho, D. (2008) · Microelectronic Engineering · doi:10.1016/j.mee.2008.12.038 · Cited by 115
Silva, N. A., Salgado, A. J., Sousa, R. A., et al. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0559 · Cited by 115
A cryogenic direct-plotting system for fabrication of 3D collagen scaffolds for tissue engineering
Kim, G., Ahn, S., Yoon, H. Y., Kim, Y.-Y., & Chun, W. (2009) · Journal of Materials Chemistry · doi:10.1039/b914187a · Cited by 115
Self-assembled composite matrix in a hierarchical 3-D scaffold for bone tissue engineering
Chen, M., Le, D. Q. S., Baatrup, A., Nygaard, J. V., Hein, S., Bjerre, L., Kassem, M. S., Zou, X., & Bünger, C. E. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.12.031 · Cited by 113
Cranioplasty after Trephination using a Novel Biodegradable Burr Hole Cover: Technical Case Report
Schantz, J., Lim, T., Chou, N., Teoh, S. H., Tan, K. C., Wang, S. C., & Hutmacher, D. W. (2006) · Operative Neurosurgery · doi:10.1227/01.neu.0000193533.54580.3f · Cited by 112
Fedorovich, N. E., Kuipers, E., Gawlitta, D., Dhert, W. J. A., & Alblas, J. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0001 · Cited by 109
Influence of process parameters on stereolithography part shrinkage
Wang, W. L., Cheah, C. M., Fuh, J. Y. H., & Lü, L. (1996) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(97)00008-3 · Cited by 109
Single-cell printing to form three-dimensional lines of olfactory ensheathing cells
Othon, C. M., Wu, X., Anders, J. J., & Ringeisen, B. R. (2008) · Biomedical Materials · doi:10.1088/1748-6041/3/3/034101 · Cited by 108
PLGA/hydrogel biopapers as a stackable substrate for printing HUVEC networks via BioLP™
Pirlo, R. K., Wu, P., Liu, J., & Ringeisen, B. R. (2011) · Biotechnology and Bioengineering · doi:10.1002/bit.23295 · Cited by 93
Abarrategi, A., Moreno-Vicente, C., Martínez-Vázquez, F. J., et al. (2012) · PLoS ONE · doi:10.1371/journal.pone.0034117 · Cited by 91
Increased Mixing Improves Hydrogel Homogeneity and Quality of Three-Dimensional Printed Constructs
Cohen, D. L., Lo, W. M., Tsavaris, A. M., Peng, D. H., Lipson, H., & Bonassar, L. J. (2010) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2010.0093 · Cited by 87
Duan, B., & Wang, M. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.05.022 · Cited by 83
Ho, S. T. B., Hutmacher, D. W., Ekaputra, A. K., Hitendra, D., & Hui, J. H. P. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0471 · Cited by 77
Chen, C. Y., Barron, J. A., & Ringeisen, B. R. (2006) · Applied Surface Science · doi:10.1016/j.apsusc.2005.11.088 · Cited by 75
Hamid, Q., Snyder, J., Wang, C., Timmer, M., Hammer, J. A., Güçeri, S. İ., & Sun, W. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034109 · Cited by 72
Laser-assisted bioprinting to deal with tissue complexity in regenerative medicine
Guillemot, F., Guillotin, B., Fontaine, A., Ali, M., Catros, S., Kériquel, V., Fricain, J., Rémy, M., Bareille, R., & Amédée, J. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.272 · Cited by 72
DROP-ON-DEMAND INKJET BIOPRINTING: A PRIMER
Binder, K. W., ALLEN, A. J., Yoo, J. J., & Atala, A. (2011) · Gene Therapy and Regulation · doi:10.1142/s1568558611000258 · Cited by 69
Dual-Scale Polymeric Constructs as Scaffolds for Tissue Engineering
Mota, C., Puppi, D., Dinucci, D., Errico, C., Bártolo, P., & Chiellini, E. (2011) · Materials · doi:10.3390/ma4030527 · Cited by 67
Self-citationDomingos, M. A. N., Chiellini, E., Cometa, S., Giglio, E. D., Fernandes, E. G., Bártolo, P., & Chiellini, E. (2010) · Virtual and Physical Prototyping · doi:10.1080/17452751003769440 · Cited by 66
Self-citationGloria, A., Russo, T., Santis, R. D., & Ambrosio, L. (2009) · PubMed · Cited by 57
Engineering of vascularized adipose constructs
Wiggenhauser, P. S., Müller, D. F., Melchels, F. P. W., Egaña, J. T., Storck, K., Mayer, H., Leuthner, P., Skodacek, D., Hopfner, Ú., Machens, H. G., et al. (2011) · Cell and Tissue Research · doi:10.1007/s00441-011-1226-2 · Cited by 56
Use of Osteoplug polycaprolactone implants as novel burr-hole covers.
Low, S. W., Ng, Y. J., Yeo, T. T., & Chou, N. (2009) · PubMed · Cited by 44
Xu, M., Li, Y., Suo, H., Yan, Y., Liu, L., Wang, Q., Ge, Y., & Xu, Y. (2010) · Biofabrication · doi:10.1088/1758-5082/2/2/025002 · Cited by 43
Yilgor, P., Yilmaz, G., Önal, M. B., et al. (2012) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1456 · Cited by 41
Tirella, A., Vozzi, F., Vozzi, G., & Ahluwalia, A. D. (2010) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2010.0195 · Cited by 41
Silva, N. A., Sousa, R. A., Pires, A. O., Sousa, N., Salgado, A. J., & Reis, R. L. (2011) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.33289 · Cited by 34
You, W., Wang, M., Lam, W., & Yuk, W. (2010) · InTech eBooks · doi:10.5772/8574 · Cited by 30
Bertsch, A., & Renaud, P. (2011) · Springer eBooks · doi:10.1007/978-0-387-92904-0_4 · Cited by 27
Machine design and processing considerations for the 3D plotting of thermoplastic scaffolds
Ragaert, K., Cardon, L., Keyser, A. D., & Degrieck, J. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014107 · Cited by 22
Duan, B., Wang, M., Li, Z. Y., Chan, W. C., & Lu, W. W. (2010) · Frontiers of Materials Science · doi:10.1007/s11706-011-0101-0 · Cited by 20
Cited by
Architected Cellular Materials
Schaedler, T. A., & Carter, W. B. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031624 · Cited by 786
Biofabrication: A Guide to Technology and Terminology
Moroni, L., Boland, T., Burdick, J. A., De Maria, C., Derby, B., Forgacs, G., Groll, J., Li, Q., Malda, J., Mironov, V. A., et al. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2017.10.015 · Cited by 636
Self-citation3D-printed bioceramic scaffolds: From bone tissue engineering to tumor therapy.
Ma, H., Feng, C., Chang, J., & Wu, C. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.08.026 · Cited by 512
3D and 4D Printing of Polymers for Tissue Engineering Applications
Tamay, D. G., Dursun Usal, T., Alagoz, A. S., Yucel, D., Hasirci, N., & Hasirci, V. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00164 · Cited by 417
3D printing technology; methods, biomedical applications, future opportunities and trends
Bozkurt, Y., & Karayel, E. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.050 · Cited by 384
Metadata
- Authors
- Mota, C., Puppi, D., Chiellini, F., & Chiellini, E.
- Venue
- Journal of Tissue Engineering and Regenerative Medicine
- Publisher
- Hindawi Limited
- Published
- 2012-11-22
- Volume
- 9
- Issue
- 3
- Pages
- 174-190
- ISSN
- 1932-6254 (ISSN-L)
- OpenAlex
- W1502960530
- Cited by
- 382
- References
- 124
- FWCI
- 3.84
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.