The DOI matches its Crossref record; 214 of the 214 references it cites were found in a registry or an index.
Recent advances of additive manufacturing in implant fabrication – A review
Open accessAbstract
The use of additive manufacturing, or 3D printing, has progressed beyond prototyping to produce intricate and valuable finished goods. The potential of additive manufacturing has increased across numerous industries due to the expansion of materials, such as high-performance metals and polymers, and advancements in machine capabilities, such as multi-material printing. By enabling complex designs, reduced waste, and quick production, it has the potential to revolutionize the consumer goods, healthcare, automotive manufacturing, and aerospace industries. The development of specialized scaffolds has been made possible by the precise control that additive manufacturing provides over the internal structure of porous materials. This technology has revolutionized tissue engineering and regenerative medicine. Furthermore, it has made it possible to create individualized implants and prosthetics that improve patient comfort and outcomes in orthopedic and dental applications. Also, it provides flexibility in design and customization for individualized implants and prosthetics in orthopedic and dental applications. Design flexibility, waste reduction, improved biocompatibility, quick prototyping, and cost-effectiveness are benefits of additive manufacturing for implants. For personalized healthcare, regenerative medicine, and better patient outcomes, additive manufacturing holds promise as the technology develops with further advancements in printing speed, resolution, and scalability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Hydrogels for tissue engineering: scaffold design variables and applications
Drury, J. L., & Mooney, D. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00340-5 · Cited by 5,136
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Hydrogels for biomedical applications
Hoffman, A. S. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.010 · Cited by 3,396
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
3-D printing: The new industrial revolution
Berman, B. (2012) · Business Horizons · doi:10.1016/j.bushor.2011.11.003 · Cited by 2,481
Zheng, Y. F., Gu, X. N., & Witte, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.01.001 · Cited by 2,436
The design of scaffolds for use in tissue engineering. Part I. Traditional factors
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Hydrogel nanoparticles in drug delivery
Hamidi, M., Azadi, A., & Rafiei, P. (2008) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2008.08.002 · Cited by 2,067
Designing Cell-Compatible Hydrogels for Biomedical Applications
Seliktar, D. (2012) · Science · doi:10.1126/science.1214804 · Cited by 1,923
The history of biodegradable magnesium implants: A review☆
Witte, F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.028 · Cited by 1,860
The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing
Attaran, M. (2017) · Business Horizons · doi:10.1016/j.bushor.2017.05.011 · Cited by 1,822
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Prevalence of Total Hip and Knee Replacement in the United States
Maradit Kremers, H., Larson, D. R., Crowson, C. S., Kremers, W. K., Washington, R. E., Steiner, C. A., Jiranek, W. A., & Berry, D. J. (2015) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/jbjs.n.01141 · Cited by 1,723
Buser, D., Schenk, R. K., Steinemann, S., Fiorellini, J. P., Fox, C. H., & Stich, H. (1991) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820250708 · Cited by 1,719
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Mohamed, O. A., Masood, S. H., & Bhowmik, J. L. (2015) · Advances in Manufacturing · doi:10.1007/s40436-014-0097-7 · Cited by 1,481
25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine
Annabi, N., Tamayol, A., Uquillas, J. A., Akbari, M., Bertassoni, L. E., Cha, C., Camci‐Unal, G., Dokmeci, M. R., Peppas, N. A., & Khademhosseini, A. (2014) · Advanced Materials · doi:10.1002/adma.201303233 · Cited by 1,409
Fabrication methods of porous metals for use in orthopaedic applications
Ryan, G., Pandit, A., & Apatsidis, D. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.002 · Cited by 1,391
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,318
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Dawood, A., Marti, B. M., Sauret-Jackson, V., & Darwood, A. (2015) · British Dental Journal · doi:10.1038/sj.bdj.2015.914 · Cited by 1,133
A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
Zhang, L., & Chen, L. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801215 · Cited by 1,100
Ho-Shui-Ling, A., Bolander, J., Rustom, L. E., Johnson, A. W., Luyten, F. P., & Picart, C. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.07.017 · Cited by 961
Qing, Y., Cheng, L., Li, R., Liu, G., Zhang, Y., Tang, X., Wang, J., Liu, H., & Qin, Y. (2018) · International Journal of Nanomedicine · doi:10.2147/ijn.s165125 · Cited by 959
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents
Bowen, P. K., Drelich, J., & Goldman, J. (2013) · Advanced Materials · doi:10.1002/adma.201300226 · Cited by 928
A review of topology optimization for additive manufacturing: Status and challenges
ZHU, J., ZHOU, H., WANG, C., ZHOU, L., YUAN, S., & ZHANG, W. (2021) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.09.020 · Cited by 874
Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
Parthasarathy, J., Starly, B., Raman, S., & Christensen, A. (2010) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2009.10.006 · Cited by 816
Vafadar, A., Guzzomi, F., Rassau, A., & Hayward, K. (2021) · Applied Sciences · doi:10.3390/app11031213 · Cited by 748
Novel Magnesium Alloys Developed for Biomedical Application: A Review
Li, N., & Zheng, Y. (2013) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2013.02.005 · Cited by 744
Biocompatibility of Advanced Manufactured Titanium Implants—A Review
Sidambe, A. (2014) · Materials · doi:10.3390/ma7128168 · Cited by 741
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
3D printing – A review of processes, materials and applications in industry 4.0
Jandyal, A., Chaturvedi, I., Wazir, I., Raina, A., & Ul Haq, M. I. (2022) · Sustainable Operations and Computers · doi:10.1016/j.susoc.2021.09.004 · Cited by 739
Designing degradable hydrogels for orthogonal control of cell microenvironments
Kharkar, P. M., Kiick, K. L., & Kloxin, A. M. (2013) · Chem. Soc. Rev. · doi:10.1039/c3cs60040h · Cited by 717
3D Printing in Pharmaceutical and Medical Applications – Recent Achievements and Challenges
Jamróz, W., Szafraniec, J., Kurek, M., & Jachowicz, R. (2018) · Pharmaceutical Research · doi:10.1007/s11095-018-2454-x · Cited by 707
Murr, L. E., Gaytan, S. M., Medina, F., Lopez, H., Martinez, E., Machado, B. I., Hernandez, D. H., Martinez, L., Lopez, M. I., Wicker, R. B., et al. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0010 · Cited by 636
Economics of additive manufacturing for end-usable metal parts
Atzeni, E., & Salmi, A. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3878-1 · Cited by 630
Additive manufacturing: rapid prototyping comes of age
Campbell, I., Bourell, D., & Gibson, I. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211231563 · Cited by 623
3D Printing of Buildings and Building Components as the Future of Sustainable Construction?
Hager, I., Golonka, A., & Putanowicz, R. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.07.357 · Cited by 593
Wong, H. M., Yeung, K. W. K., Lam, K. O., Tam, V., Chu, P. K., Luk, K. D. K., & Cheung, K. M. C. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.11.111 · Cited by 579
3D Printing of Polymer Nanocomposites via Stereolithography
Manapat, J. Z., Chen, Q., Ye, P., & Advincula, R. C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600553 · Cited by 565
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
Masood, S. H., & Song, W. Q. (2004) · Materials & Design · doi:10.1016/j.matdes.2004.02.009 · Cited by 543
A critical review on polymer-based bio-engineered materials for scaffold development
Cheung, H.-Y., Lau, K.-T., Lu, T.-P., & Hui, D. (2007) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2006.06.014 · Cited by 531
Metal Oxide Nanoparticles as Biomedical Materials
Nikolova, M. P., & Chavali, M. S. (2020) · Biomimetics · doi:10.3390/biomimetics5020027 · Cited by 510
Balla, V. K., Bodhak, S., Bose, S., & Bandyopadhyay, A. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.01.046 · Cited by 504
Wang, J., Witte, F., Xi, T., Zheng, Y., Yang, K., Yang, Y., Zhao, D., Meng, J., Li, Y., Li, W., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.04.011 · Cited by 493
Biodegradable Materials and Metallic Implants—A Review
Prakasam, M., Locs, J., Salma-Ancane, K., Loca, D., Largeteau, A., & Berzina-Cimdina, L. (2017) · Journal of Functional Biomaterials · doi:10.3390/jfb8040044 · Cited by 493
Novel Biomaterials Used in Medical 3D Printing Techniques
Tappa, K., & Jammalamadaka, U. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010017 · Cited by 490
Uriondo, A., Esperon-Miguez, M., & Perinpanayagam, S. (2015) · Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · doi:10.1177/0954410014568797 · Cited by 489
Hollander, D. A., von Walter, M., Wirtz, T., Sellei, R., Schmidt-Rohlfing, B., Paar, O., & Erli, H.-J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.041 · Cited by 482
Analyte-Responsive Hydrogels: Intelligent Materials for Biosensing and Drug Delivery
Culver, H. R., Clegg, J. R., & Peppas, N. A. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00533 · Cited by 481
Improving biocompatibility for next generation of metallic implants
Bandyopadhyay, A., Mitra, I., Goodman, S. B., Kumar, M., & Bose, S. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101053 · Cited by 463
Bogers, M., Hadar, R., & Bilberg, A. (2016) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2015.07.024 · Cited by 457
Lasers in additive manufacturing: A review
Lee, H., Lim, C. H. J., Low, M. J., Tham, N., Murukeshan, V. M., & Kim, Y.-J. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0037-7 · Cited by 449
Biodegradable Materials for Bone Repairs: A Review
Tan, L., Yu, X., Wan, P., & Yang, K. (2013) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2013.03.002 · Cited by 431
Role of additive manufacturing applications towards environmental sustainability
Javaid, M., Haleem, A., Singh, R. P., Suman, R., & Rab, S. (2021) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2021.07.005 · Cited by 419
Additively manufactured porous tantalum implants
Wauthle, R., van der Stok, J., Amin Yavari, S., Van Humbeeck, J., Kruth, J.-P., Zadpoor, A. A., Weinans, H., Mulier, M., & Schrooten, J. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.12.003 · Cited by 417
Additive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential
Goh, G. D., Agarwala, S., Goh, G. L., Dikshit, V., Sing, S. L., & Yeong, W. Y. (2017) · Aerospace Science and Technology · doi:10.1016/j.ast.2016.12.019 · Cited by 413
Ahmadi, S., Yavari, S., Wauthle, R., Pouran, B., Schrooten, J., Weinans, H., & Zadpoor, A. (2015) · Materials · doi:10.3390/ma8041871 · Cited by 399
Günay, K. A., Theato, P., & Klok, H. (2013) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.26333 · Cited by 399
Yao, H.-B., Fang, H.-Y., Wang, X.-H., & Yu, S.-H. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00121j · Cited by 394
Bone ingrowth in porous titanium implants produced by 3D fiber deposition
Li, J. P., Habibovic, P., van den Doel, M., Wilson, C. E., de Wijn, J. R., van Blitterswijk, C. A., & de Groot, K. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.02.020 · Cited by 393
Magnesium matrix composites for biomedical applications: A review
Bommala, V. K., Krishna, M. G., & Rao, C. T. (2019) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2018.11.001 · Cited by 393
Additive manufacturing: expanding 3D printing horizon in industry 4.0
Prashar, G., Vasudev, H., & Bhuddhi, D. (2022) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-022-00956-4 · Cited by 385
Carbon-based functional nanomaterials: Preparation, properties and applications
Li, Z., Wang, L., Li, Y., Feng, Y., & Feng, W. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.04.028 · Cited by 384
Li, B., Chen, F., Wang, X., Ji, B., & Wu, Y. (2007) · Food Chemistry · doi:10.1016/j.foodchem.2006.07.002 · Cited by 381
3D Printing of Buildings: Construction of the Sustainable Houses of the Future by BIM
Sakin, M., & Kiroglu, Y. C. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.09.562 · Cited by 372
Strong, Tailored, Biocompatible Shape‐Memory Polymer Networks
Yakacki, C. M., Shandas, R., Safranski, D., Ortega, A. M., Sassaman, K., & Gall, K. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200701049 · Cited by 368
Soft Robotic Manipulation and Locomotion with a 3D Printed Electroactive Hydrogel
Han, D., Farino, C., Yang, C., Scott, T., Browe, D., Choi, W., Freeman, J. W., & Lee, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04250 · Cited by 361
Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing
Jardini, A. L., Larosa, M. A., Filho, R. M., Zavaglia, C. A. D. C., Bernardes, L. F., Lambert, C. S., Calderoni, D. R., & Kharmandayan, P. (2014) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2014.07.006 · Cited by 350
Arifin, A., Sulong, A. B., Muhamad, N., Syarif, J., & Ramli, M. I. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.09.045 · Cited by 349
Zirconia Dental Implants: A Literature Review
Özkurt, Z., & Kazazoğlu, E. (2011) · Journal of Oral Implantology · doi:10.1563/aaid-joi-d-09-00079 · Cited by 347
Ibrahim, M. Z., Sarhan, A. A. D., Yusuf, F., & Hamdi, M. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.04.231 · Cited by 344
Ryan, K. R., Down, M. P., & Banks, C. E. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126162 · Cited by 338
An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing
Kirchmajer, D. M., Gorkin III, R., & in het Panhuis, M. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00393h · Cited by 337
Direct laser processing of a tantalum coating on titanium for bone replacement structures
Balla, V. K., Banerjee, S., Bose, S., & Bandyopadhyay, A. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.11.021 · Cited by 333
Accuracy of medical models made by additive manufacturing (rapid manufacturing)
Salmi, M., Paloheimo, K.-S., Tuomi, J., Wolff, J., & Mäkitie, A. (2013) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2012.11.041 · Cited by 330
Romanò, C. L., Scarponi, S., Gallazzi, E., Romanò, D., & Drago, L. (2015) · Journal of Orthopaedic Surgery and Research · doi:10.1186/s13018-015-0294-5 · Cited by 311
Daubert, D. M., Weinstein, B. F., Bordin, S., Leroux, B. G., & Flemmig, T. F. (2015) · Journal of Periodontology · doi:10.1902/jop.2014.140438 · Cited by 308
Advances in additive manufacturing for bone tissue engineering scaffolds
Moreno Madrid, A. P., Vrech, S. M., Sanchez, M. A., & Rodriguez, A. P. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.03.037 · Cited by 307
Warnke, P. H., Douglas, T., Wollny, P., Sherry, E., Steiner, M., Galonska, S., Becker, S. T., Springer, I. N., Wiltfang, J., & Sivananthan, S. (2009) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2008.0288 · Cited by 305
Surface modification of biomaterials and biomedical devices using additive manufacturing
Bose, S., Robertson, S. F., & Bandyopadhyay, A. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.11.003 · Cited by 305
Feng, Q., Wei, K., Lin, S., Xu, Z., Sun, Y., Shi, P., Li, G., & Bian, L. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.05.043 · Cited by 304
Additive manufacturing of biodegradable metals: Current research status and future perspectives
Qin, Y., Wen, P., Guo, H., Xia, D., Zheng, Y., Jauer, L., Poprawe, R., Voshage, M., & Schleifenbaum, J. H. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.04.046 · Cited by 303
Tshephe, T. S., Akinwamide, S. O., Olevsky, E., & Olubambi, P. A. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e09041 · Cited by 293
Escribano, P., Julián-López, B., Planelles-Aragó, J., Cordoncillo, E., Viana, B., & Sanchez, C. (2008) · J. Mater. Chem. · doi:10.1039/b710800a · Cited by 287
Bekmurzayeva, A., Duncanson, W. J., Azevedo, H. S., & Kanayeva, D. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2018.08.049 · Cited by 284
Three-dimensional printing of metals for biomedical applications
Ni, J., Ling, H., Zhang, S., Wang, Z., Peng, Z., Benyshek, C., Zan, R., Miri, A. K., Li, Z., Zhang, X., et al. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100024 · Cited by 279
Fabrication of drug-loaded hydrogels with stereolithographic 3D printing
Martinez, P. R., Goyanes, A., Basit, A. W., & Gaisford, S. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.09.003 · Cited by 274
Graphene and its derivatives as biomedical materials: future prospects and challenges
Banerjee, A. N. (2018) · Interface Focus · doi:10.1098/rsfs.2017.0056 · Cited by 273
Applications of 3D printing in healthcare
Dodziuk, H. (2016) · Polish Journal of Cardio-Thoracic Surgery · doi:10.5114/kitp.2016.62625 · Cited by 272
Elloumi‐Hannachi, I., Yamato, M., & Okano, T. (2010) · Journal of Internal Medicine · doi:10.1111/j.1365-2796.2009.02185.x · Cited by 271
Szymczyk-Ziółkowska, P., Łabowska, M. B., Detyna, J., Michalak, I., & Gruber, P. (2020) · Biocybernetics and Biomedical Engineering · doi:10.1016/j.bbe.2020.01.015 · Cited by 266
Advances and significances of nanoparticles in semiconductor applications – A review
Hossain, N., Mobarak, M. H., Mimona, M. A., Islam, M. A., Hossain, A., Zohura, F. T., & Chowdhury, M. A. (2023) · Results in Engineering · doi:10.1016/j.rineng.2023.101347 · Cited by 260
Self-citationTitanium oral implants: surface characteristics, interface biology and clinical outcome
Palmquist, A., Omar, O. M., Esposito, M., Lausmaa, J., & Thomsen, P. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0118.focus · Cited by 258
Zhang, C., Li, Y., Kang, W., Liu, X., & Wang, Q. (2021) · SusMat · doi:10.1002/sus2.11 · Cited by 256
Shape memory alloys: Properties and biomedical applications
Mantovani, D. (2000) · JOM · doi:10.1007/s11837-000-0082-4 · Cited by 253
Liu, T., Jiao, C., Peng, X., Chen, Y.-N., Chen, Y., He, C., Liu, R., & Wang, H. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb02556h · Cited by 248
Review: Polymeric-Based 3D Printing for Tissue Engineering
Wu, G.-H., & Hsu, S.-H. (2015) · Journal of Medical and Biological Engineering · doi:10.1007/s40846-015-0038-3 · Cited by 239
Additive manufacturing of cardiovascular CoCr stents by selective laser melting
Demir, A. G., & Previtali, B. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.091 · Cited by 235
Additive Manufacturing of Precision Biomaterials
Guzzi, E. A., & Tibbitt, M. W. (2020) · Advanced Materials · doi:10.1002/adma.201901994 · Cited by 234
A review on additive/subtractive hybrid manufacturing of directed energy deposition (DED) process
Lalegani Dezaki, M., Serjouei, A., Zolfagharian, A., Fotouhi, M., Moradi, M., Ariffin, M. K. A., & Bodaghi, M. (2022) · Advanced Powder Materials · doi:10.1016/j.apmate.2022.100054 · Cited by 229
Polyblend nanofibers for biomedical applications: perspectives and challenges
Gunn, J., & Zhang, M. (2010) · Trends in Biotechnology · doi:10.1016/j.tibtech.2009.12.006 · Cited by 226
Kumar, A., Mandal, S., Barui, S., Vasireddi, R., Gbureck, U., Gelinsky, M., & Basu, B. (2016) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2016.01.001 · Cited by 225
Al Rashid, A., Khan, S. A., G. Al-Ghamdi, S., & Koç, M. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.016 · Cited by 225
How Additive Manufacturing Technology Changes Business Models? – Review of Literature
Savolainen, J., & Collan, M. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101070 · Cited by 223
Zhang, X.-Y., Fang, G., & Zhou, J. (2017) · Materials · doi:10.3390/ma10010050 · Cited by 222
Nouri, A., Rohani Shirvan, A., Li, Y., & Wen, C. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2021.03.058 · Cited by 222
3D printing of polyether-ether-ketone for biomedical applications
Singh, S., Prakash, C., & Ramakrishna, S. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.02.035 · Cited by 220
van Hengel, I. A. J., Riool, M., Fratila-Apachitei, L. E., Witte-Bouma, J., Farrell, E., Zadpoor, A. A., Zaat, S. A. J., & Apachitei, I. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.02.030 · Cited by 216
Hydrogel Sensors and Actuators: Engineering and Technology
(2010) · Springer Series on Chemical Sensors and Biosensors · doi:10.1007/978-3-540-75645-3 · Cited by 213
Baiguera, S., Del Gaudio, C., Lucatelli, E., Kuevda, E., Boieri, M., Mazzanti, B., Bianco, A., & Macchiarini, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.10.060 · Cited by 211
Manufacturing of fine-structured 3D porous filter elements by selective laser melting
Yadroitsev, I., Shishkovsky, I., Bertrand, P., & Smurov, I. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2008.07.154 · Cited by 206
Inacio, M. C. S., Graves, S. E., Pratt, N. L., Roughead, E. E., & Nemes, S. (2017) · Clinical Orthopaedics and Related Research · doi:10.1007/s11999-017-5377-7 · Cited by 206
Additive manufacturing method and different welding applications
Karayel, E., & Bozkurt, Y. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.08.039 · Cited by 203
Bandyopadhyay, A., Bose, S., & Das, S. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.3 · Cited by 198
Lu, Q. Y., & Wong, C. H. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1351201 · Cited by 198
Current advances in additive manufacturing
Pérez, M., Carou, D., Rubio, E. M., & Teti, R. (2020) · Procedia CIRP · doi:10.1016/j.procir.2020.05.076 · Cited by 198
Autonomous microfluidics with stimuli-responsive hydrogels
Dong, L., & Jiang, H. (2007) · Soft Matter · doi:10.1039/b706563a · Cited by 196
A Review on Additive Manufacturing of Shape-Memory Materials for Biomedical Applications
Sabahi, N., Chen, W., Wang, C.-H., Kruzic, J. J., & Li, X. (2020) · JOM · doi:10.1007/s11837-020-04013-x · Cited by 195
Synthesis and modification of apatite nanoparticles for use in dental and medical applications
Okada, M., & Matsumoto, T. (2015) · Japanese Dental Science Review · doi:10.1016/j.jdsr.2015.03.004 · Cited by 194
Biodegradable Polymers for Biomedical Additive Manufacturing
Puppi, D., & Chiellini, F. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100700 · Cited by 191
Hydrogel Based Biosensors for In Vitro Diagnostics of Biochemicals, Proteins, and Genes
Jung, I. Y., Kim, J. S., Choi, B. R., Lee, K., & Lee, H. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601475 · Cited by 187
Chohan, J. S., Singh, R., Boparai, K. S., Penna, R., & Fraternali, F. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.02.045 · Cited by 185
Germaini, M.-M., Belhabib, S., Guessasma, S., Deterre, R., Corre, P., & Weiss, P. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100963 · Cited by 184
Review of additive manufacturing methods for high-performance ceramic materials
Wang, J.-C., Dommati, H., & Hsieh, S.-J. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03669-3 · Cited by 181
3D Printing of Physical Organ Models: Recent Developments and Challenges
Jin, Z., Li, Y., Yu, K., Liu, L., Fu, J., Yao, X., Zhang, A., & He, Y. (2021) · Advanced Science · doi:10.1002/advs.202101394 · Cited by 180
On the application of additive manufacturing methods for auxetic structures: a review
Joseph, A., Mahesh, V., & Harursampath, D. (2021) · Advances in Manufacturing · doi:10.1007/s40436-021-00357-y · Cited by 179
Chakraborty, S., & Biswas, M. C. (2020) · Composite Structures · doi:10.1016/j.compstruct.2020.112562 · Cited by 174
Dental Restorative Digital Workflow: Digital Smile Design from Aesthetic to Function
Cervino, G., Fiorillo, L., Arzukanyan, A. V., Spagnuolo, G., & Cicciù, M. (2019) · Dentistry Journal · doi:10.3390/dj7020030 · Cited by 172
Additive manufacturing for the automotive industry
Vasco, J. C. (2021) · Additive Manufacturing · doi:10.1016/b978-0-12-818411-0.00010-0 · Cited by 172
Friction Stir Additive Manufacturing: Route to High Structural Performance
Palanivel, S., Sidhar, H., & Mishra, R. S. (2015) · JOM · doi:10.1007/s11837-014-1271-x · Cited by 171
Rapid Prototyping for Biomedical Engineering: Current Capabilities and Challenges
Lantada, A. D., & Morgado, P. L. (2012) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071811-150112 · Cited by 171
Smart Biopolymers and their Biomedical Applications
Pattanashetti, N. A., Heggannavar, G. B., & Kariduraganavar, M. Y. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.08.030 · Cited by 170
Biomaterials and Their Biomedical Applications: From Replacement to Regeneration
Todros, S., Todesco, M., & Bagno, A. (2021) · Processes · doi:10.3390/pr9111949 · Cited by 169
Shape Morphing of Hydrogels in Alternating Magnetic Field
Tang, J., Yin, Q., Qiao, Y., & Wang, T. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b05742 · Cited by 164
From 3D models to 3D prints: an overview of the processing pipeline
Livesu, M., Ellero, S., Martínez, J., Lefebvre, S., & Attene, M. (2017) · Computer Graphics Forum · doi:10.1111/cgf.13147 · Cited by 162
Velu, R., Calais, T., Jayakumar, A., & Raspall, F. (2019) · Materials · doi:10.3390/ma13010092 · Cited by 161
Future of additive manufacturing in healthcare
Rezvani Ghomi, E., Khosravi, F., Neisiany, R. E., Singh, S., & Ramakrishna, S. (2021) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2020.100255 · Cited by 161
A review of biocompatible metal injection moulding process parameters for biomedical applications
Hamidi, M. F. F. A., Harun, W. S. W., Samykano, M., Ghani, S. A. C., Ghazalli, Z., Ahmad, F., & Sulong, A. B. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.05.016 · Cited by 159
Advances in Medical Applications of Additive Manufacturing
Li, C., Pisignano, D., Zhao, Y., & Xue, J. (2020) · Engineering · doi:10.1016/j.eng.2020.02.018 · Cited by 159
Qin, Y., Liu, A., Guo, H., Shen, Y., Wen, P., Lin, H., Xia, D., Voshage, M., Tian, Y., & Zheng, Y. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.03.055 · Cited by 159
Electrospray Encapsulation of Hydrophilic and Hydrophobic Drugs in Poly(L‐lactic acid) Nanoparticles
Valo, H., Peltonen, L., Vehviläinen, S., Karjalainen, M., Kostiainen, R., Laaksonen, T., & Hirvonen, J. (2009) · Small · doi:10.1002/smll.200801907 · Cited by 158
Topological optimization of internal patterns and support in additive manufacturing
Gardan, N., & Schneider, A. (2014) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2014.07.003 · Cited by 158
Liquid metal biomaterials: a newly emerging area to tackle modern biomedical challenges
Yi, L., & Liu, J. (2017) · International Materials Reviews · doi:10.1080/09506608.2016.1271090 · Cited by 154
Biocompatibility Considerations in the Design of Graphene Biomedical Materials
Bullock, C. J., & Bussy, C. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201900229 · Cited by 153
Shape memory effect in 3D-printed scaffolds for self-fitting implants
Senatov, F. S., Zadorozhnyy, M. Y., Niaza, K. V., Medvedev, V. V., Kaloshkin, S. D., Anisimova, N. Y., Kiselevskiy, M., & Yang, K.-C. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.06.011 · Cited by 149
Chong, W. J., Shen, S., Li, Y., Trinchi, A., Simunec, D. P., Kyratzis, I. L., Sola, A., & Wen, C. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.09.039 · Cited by 142
In vitro osteogenesis on a highly bioactive glass‐ceramic (Biosilicate®)
Moura, J., Teixeira, L. N., Ravagnani, C., Peitl, O., Zanotto, E. D., Beloti, M. M., Panzeri, H., Rosa, A. L., & de Oliveira, P. T. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31165 · Cited by 141
Picard, M. C., Mohanty, A. K., & Misra, M. (2020) · RSC Advances · doi:10.1039/d0ra04857g · Cited by 141
Divakaran, N. C., Das, J. P., Ajay Kumar, P., V, Mohanty, S., Ramadoss, A., & NAYAK, S. K. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.01.002 · Cited by 141
Stachiv, I., Alarcón, E., & Lamac, M. (2021) · Metals · doi:10.3390/met11030415 · Cited by 140
Revilla‐León, M., Sadeghpour, M., & Özcan, M. (2020) · Journal of Prosthodontics · doi:10.1111/jopr.13212 · Cited by 135
Customised titanium implant fabricated in additive manufacturing for craniomaxillofacial surgery
Jardini, A. L., Larosa, M. A., Zavaglia, C. A. D. C., Bernardes, L. F., Lambert, C. S., Kharmandayan, P., Calderoni, D. R., & Filho, R. M. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.900857 · Cited by 131
Recent advances in additive manufacturing of active mechanical metamaterials
Montgomery, S. M., Kuang, X., Armstrong, C. D., & Qi, H. J. (2020) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2020.100869 · Cited by 131
Selective laser melting of pure Zn with high density for biodegradable implant manufacturing
Demir, A. G., Monguzzi, L., & Previtali, B. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.03.004 · Cited by 125
Mecheter, A., Tarlochan, F., & Küçükvar, M. (2023) · Sustainability · doi:10.3390/su151612299 · Cited by 122
Lenz, J., MacDonald, E. W., Harik, R., & Wuest, T. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.10.001 · Cited by 119
Role of CT and MRI in the design and development of orthopaedic model using additive manufacturing
Haleem, A., & Javaid, M. (2018) · Journal of Clinical Orthopaedics and Trauma · doi:10.1016/j.jcot.2018.07.002 · Cited by 117
Challenges and Solutions for the Additive Manufacturing of Biodegradable Magnesium Implants
Wang, Y., Fu, P., Wang, N., Peng, L., Kang, B., Zeng, H., Yuan, G., & Ding, W. (2020) · Engineering · doi:10.1016/j.eng.2020.02.015 · Cited by 117
Additive manufacturing in the biomedical field-recent research developments
Tom, T., Sreenilayam, S. P., Brabazon, D., Jose, J. P., Joseph, B., Kailasnath, M., & Thomas, S. (2022) · Results in Engineering · doi:10.1016/j.rineng.2022.100661 · Cited by 116
Hierarchical chemomechanical encoding of multi-responsive hydrogel actuators via 3D printing
Odent, J., Vanderstappen, S., Toncheva, A., Pichon, E., Wallin, T. J., Wang, K., Shepherd, R. F., Dubois, P., & Raquez, J.-M. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta03547h · Cited by 115
Additive manufacturing and 3D printing of metallic biomaterials
Chua, K., Khan, I., Malhotra, R., & Zhu, D. (2021) · Engineered Regeneration · doi:10.1016/j.engreg.2021.11.002 · Cited by 113
Fernández‐Ferreiro, A., Barcia, M. G., Gil‐Martínez, M., Prado, A. V., Lema, I., Argibay, B., Blanco-Méndez, J., Lamas, M. J., & Otero-Espinar, F. J. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2015.06.003 · Cited by 111
Recent advancements in additive manufacturing technologies for porous material applications
Guddati, S., Kiran, A. S. K., Leavy, M., & Ramakrishna, S. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04116-z · Cited by 108
Scheithauer, U., Weingarten, S., Johne, R., Schwarzer, E., Abel, J., Richter, H., Moritz, T., & Michaelis, A. (2017) · Materials · doi:10.3390/ma10121368 · Cited by 100
Additive manufacturing in production: challenges and opportunities
Ahuja, B., Karg, M. C. H., & Schmidt, M. (2015) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2082521 · Cited by 92
Fit, Precision, and Trueness of 3D-Printed Zirconia Crowns Compared to Milled Counterparts
Abualsaud, R., & Alalawi, H. (2022) · Dentistry Journal · doi:10.3390/dj10110215 · Cited by 87
3D printing technologies and composite materials for structural applications
Velu, R., Raspall, F., & Singamneni, S. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102177-4.00008-2 · Cited by 79
Li, X., Cui, R., Liu, W., Sun, L., Yu, B., Fan, Y., Feng, Q., Cui, F., & Watari, F. (2013) · Journal of Nanomaterials · doi:10.1155/2013/728130 · Cited by 68
Recent Advancements in Additive Manufacturing (AM) Techniques: A Forward-Looking Review
Singh, N., Siddiqui, H., Koyalada, B. S. R., Mandal, A. K., Chauhan, V., Sathish, N., Kumar, S., Goswami, M., & Kumar, S. (2023) · Metals and Materials International · doi:10.1007/s12540-022-01380-9 · Cited by 67
The matrix reloaded: the evolution of regenerative hydrogels
Jabbari, E., Leijten, J., Xu, Q., & Khademhosseini, A. (2015) · Materials Today · doi:10.1016/j.mattod.2015.10.005 · Cited by 63
Recent development of dental implant materials, synthesis process, and failure – A review
Hossain, N., Mobarak, M. H., Islam, M. A., Hossain, A., Mahmud, M. Z. A., Rayhan, M. T., & Chowdhury, M. A. (2023) · Results in Chemistry · doi:10.1016/j.rechem.2023.101136 · Cited by 63
Self-citation“Freezing”, morphing, and folding of stretchy tough hydrogels
Li, T., Wang, J., Zhang, L., Yang, J., Yang, M., Zhu, D., Zhou, X., Handschuh‐Wang, S., Liu, Y., & Zhou, X. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01265a · Cited by 62
Additive Manufacturing for Health: State of the Art, Gaps and Needs, and Recommendations
Huang, Y. H., & Schmid, S. R. (2018) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4040430 · Cited by 62
Miramini, S., Fegan, K. L., Green, N. C., Espino, D. M., Zhang, L., & Thomas-Seale, L. E. J. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.103544 · Cited by 62
Recent advances in additive manufacturing technology for bone tissue engineering scaffolds
Zhou, X., Feng, Y., Zhang, J., Shi, Y., & Wang, L. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05444-1 · Cited by 61
Additive manufacturing of metallic biomaterials: sustainability aspect, opportunity, and challenges
Pesode, P., & Barve, S. (2023) · Journal of Industrial and Production Engineering · doi:10.1080/21681015.2023.2229341 · Cited by 53
Strantza, M., Aggelis, D. G., Baere, D. D., Guillaume, P., & Hemelrijck, D. V. (2015) · Sensors · doi:10.3390/s151026709 · Cited by 51
3D Printing of Bioinert Oxide Ceramics for Medical Applications
Buj-Corral, I., & Tejo‐Otero, A. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13030155 · Cited by 50
Barwacz, C. A., Brogden, K. A., Stanford, C. M., Dawson, D. V., Recker, E. N., & Blanchette, D. R. (2014) · Clinical Oral Implants Research · doi:10.1111/clr.12326 · Cited by 49
Kunrath, M. F. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00107 · Cited by 49
Recent Advances in 3D Bioprinting: A Review of Cellulose-Based Biomaterials Ink
Jusoh, W. N. L. W., Sajab, M. S., Abdul, P. M., & Kaco, H. (2022) · Polymers · doi:10.3390/polym14112260 · Cited by 48
Telang, V. S., Pemmada, R., Thomas, V., Ramakrishna, S., Tandon, P., & Nanda, H. S. (2021) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2021.100264 · Cited by 44
QoS-Aware Buffer-Aided Relaying Implant WBAN for Healthcare IoT: Opportunities and Challenges
Cai, G., Fang, Y., Wen, J., Han, G., & Yang, X. (2019) · IEEE Network · doi:10.1109/mnet.2019.1800405 · Cited by 43
Hydraulic setting Mg 3 (PO 4 ) 2 powders for 3D printing technology
Vorndran, E., Wunder, K., Moseke, C., Biermann, I., Müller, F. A., Zorn, K., & Gbureck, U. (2011) · Advances in Applied Ceramics Structural Functional and Bioceramics · doi:10.1179/1743676111y.0000000030 · Cited by 40
Fuchs, S., Mozes, E., Maoz, A., & Sela, M. (1974) · The Journal of Experimental Medicine · doi:10.1084/jem.139.1.148 · Cited by 39
Bhatt, S., Joshi, D., Rakesh, P. K., & Godiyal, A. K. (2023) · Expert Review of Medical Devices · doi:10.1080/17434440.2023.2169130 · Cited by 38
Cell Encapsulation and 3D Bioprinting for Therapeutic Cell Transplantation
Samadi, A., Moammeri, A., Pourmadadi, M., Abbasi, P., Hosseinpour, Z., Farokh, A., Shamsabadipour, A., Heydari, M., & Mohammadi, M. R. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c01183 · Cited by 38
Bioinspired colloidal materials with special optical, mechanical, and cell-mimetic functions
Zhang, T., Ma, Y., & Qi, L. (2012) · Journal of Materials Chemistry B · doi:10.1039/c2tb00175f · Cited by 35
Metadata
- Authors
- Mobarak, M. H., Islam, M. A., Hossain, N., Al Mahmud, M. Z., Rayhan, M. T., Nishi, N. J., & Chowdhury, M. A.
- Venue
- Applied Surface Science Advances
- Publisher
- Elsevier BV
- Published
- 2023-12
- Volume
- 18
- Pages
- 100462
- ISSN
- 2666-5239 (ISSN-L)
- OpenAlex
- W4387238565
- Cited by
- 307
- References
- 214
- FWCI
- 22.30
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.