The DOI matches its Crossref record; 139 of the 139 references it cites were found in a registry or an index.
Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Abstract
Abstract This paper provides a comprehensive review of the material behaviour for extrusion-based concrete 3D printing spanning from the early age to long-term performance. We begin with a discussion on the recent progress on the understanding of early-age behaviour. Following this, the mechanical response in the hardened state, and the different strategies to introduce reinforcement are reviewed. Finally, we present insights and perspectives on the transport mechanisms in printed concrete to assess the long-term performance, and also discuss the overall impact of construction by concrete 3D printing on sustainability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Concrete: Microstructure, Properties, and Materials
Mehta, P. K., & Monteiro, P. J. M. (2005) · Cited by 5,607
Lea's Chemistry of Cement and Concrete
(2019) · Elsevier eBooks · doi:10.1016/c2013-0-19325-7 · Cited by 1,901
3D printing using concrete extrusion: A roadmap for research
Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,604
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Mix design and fresh properties for high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012) · Materials and Structures · doi:10.1617/s11527-012-9828-z · Cited by 1,218
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
Rheological requirements for printable concretes
Roussel, N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.005 · Cited by 1,203
Automated construction by contour crafting—related robotics and information technologies
Khoshnevis, B. (2004) · Automation in Construction · doi:10.1016/j.autcon.2003.08.012 · Cited by 1,161
Vision of 3D printing with concrete — Technical, economic and environmental potentials
De Schutter, G., Lesage, K., Mechtcherine, V., Nerella, V. N., Habert, G., & Agusti-Juan, I. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.06.001 · Cited by 1,072
Self-citationMechanical behaviour of concrete made with fine recycled concrete aggregates
Evangelista, L., & de Brito, J. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2006.12.004 · Cited by 1,059
Hardened properties of high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., & Thorpe, T. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.12.003 · Cited by 1,020
Lea's Chemistry of Cement and Concrete
(1998) · Elsevier eBooks · doi:10.1016/b978-0-7506-6256-7.x5007-3 · Cited by 1,019
A critical review of the use of 3-D printing in the construction industry
Wu, P., Wang, J., & Wang, X. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.04.005 · Cited by 1,002
Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.097 · Cited by 962
Durability of steel reinforced concrete in chloride environments: An overview
Shi, X., Xie, N., Fortune, K., & Gong, J. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.12.038 · Cited by 929
A comparison of rapid prototyping technologies
Pham, D. T., & Gault, R. S. (1998) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(97)00137-5 · Cited by 915
Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.001 · Cited by 846
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.02.017 · Cited by 836
Cement and concrete as an engineering material: An historic appraisal and case study analysis
Gagg, C. R. (2014) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2014.02.004 · Cited by 808
Building components for an outpost on the lunar soil by means of a novel 3D printing technology
Cesaretti, G., Dini, E., De Kestelier, X., Colla, V., & Pambaguian, L. (2014) · Acta Astronautica · doi:10.1016/j.actaastro.2013.07.034 · Cited by 806
Kazemian, A., Yuan, X., Cochran, E., & Khoshnevis, B. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.015 · Cited by 774
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Panda, B., Paul, S. C., & Tan, M. J. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.07.123 · Cited by 742
Effect of surface moisture on inter-layer strength of 3D printed concrete
Sanjayan, J., Nematollahi, B., Xia, M., & Marchment, T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.232 · Cited by 713
Digital Concrete: Opportunities and Challenges
Wangler, T., Lloret, E., Reiter, L., Hack, N., Gramazio, F., Kohler, M., Bernhard, M., Dillenburger, B., Buchli, J., Roussel, N., et al. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.16 · Cited by 636
Fresh and hardened properties of 3D printable cementitious materials for building and construction
Paul, S. C., Tay, Y. W. D., Panda, B., & Tan, M. J. (2018) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2017.02.008 · Cited by 633
Ma, G., Li, Z., & Wang, L. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.051 · Cited by 616
Additive construction: State-of-the-art, challenges and opportunities
Labonnote, N., Rønnquist, A., Manum, B., & Rüther, P. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.08.026 · Cited by 607
Nerella, V. N., Hempel, S., & Mechtcherine, V. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.235 · Cited by 605
Mechtcherine, V., Bos, F. P., Perrot, A., da Silva, W. R. L., Nerella, V. N., Fataei, S., Wolfs, R. J. M., Sonebi, M., & Roussel, N. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106037 · Cited by 598
Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing
Ma, G., Li, Z., Li, W., Wang, F., & Sanjayan, J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.008 · Cited by 597
3D Printing of Buildings and Building Components as the Future of Sustainable Construction?
Hager, I., Golonka, A., & Putanowicz, R. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.07.357 · Cited by 593
Measurement of tensile bond strength of 3D printed geopolymer mortar
Panda, B., Paul, S. C., Mohamed, N. A. N., Tay, Y. W. D., & Tan, M. J. (2018) · Measurement · doi:10.1016/j.measurement.2017.08.051 · Cited by 592
Freeform Construction: Mega-scale Rapid Manufacturing for construction
Buswell, R. A., Soar, R. C., Gibb, A. G. F., & Thorpe, A. (2007) · Automation in Construction · doi:10.1016/j.autcon.2006.05.002 · Cited by 536
Panda, B., & Tan, M. J. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.03.031 · Cited by 520
Additive manufacturing of geopolymer for sustainable built environment
Panda, B., Paul, S. C., Hui, L. J., Tay, Y. W. D., & Tan, M. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.08.165 · Cited by 516
Marchon, D., Kawashima, S., Bessaies-Bey, H., Mantellato, S., & Ng, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.014 · Cited by 507
Design of a 3D printed concrete bridge by testing
Salet, T. A. M., Ahmed, Z. Y., Bos, F. P., & Laagland, H. L. M. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1476064 · Cited by 504
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.10.002 · Cited by 482
3D printable concrete: Mixture design and test methods
Rahul, A. V., Santhanam, M., Meena, H., & Ghani, Z. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.12.014 · Cited by 481
Self-citationRheological and harden properties of the high-thixotropy 3D printing concrete
Zhang, Y., Zhang, Y., She, W., Yang, L. H., Liu, G., & Yang, Y. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.12.061 · Cited by 475
García de Soto, B., Agustí-Juan, I., Hunhevicz, J., Joss, S., Graser, K., Habert, G., & Adey, B. T. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.04.004 · Cited by 474
Properties of 3D-printed fiber-reinforced Portland cement paste
Hambach, M., & Volkmer, D. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.02.001 · Cited by 470
Bravo, M., de Brito, J., Pontes, J., & Evangelista, L. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.03.012 · Cited by 465
Particle-bed 3D printing in concrete construction – Possibilities and challenges
Lowke, D., Dini, E., Perrot, A., Weger, D., Gehlen, C., & Dillenburger, B. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.018 · Cited by 447
The role of early age structural build-up in digital fabrication with concrete
Reiter, L., Wangler, T., Roussel, N., & Flatt, R. J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.011 · Cited by 432
3D printing of a post-tensioned concrete girder designed by topology optimization
Vantyghem, G., Corte, W. D., Shakur, E., & Amir, O. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103084 · Cited by 421
3D printing of reinforced concrete elements: Technology and design approach
Asprone, D., Auricchio, F., Menna, C., & Mercuri, V. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.018 · Cited by 413
Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
Panda, B., Ruan, S., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.11.109 · Cited by 405
Rethinking reinforcement for digital fabrication with concrete
Asprone, D., Menna, C., Bos, F. P., Salet, T. A. M., Mata-Falcón, J., & Kaufmann, W. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.020 · Cited by 385
Mega-scale fabrication by Contour Crafting
Khoshnevis, B., Hwang, D., Yao, K. T., & Yeh, Z. (2006) · International Journal of Industrial and Systems Engineering · doi:10.1504/ijise.2006.009791 · Cited by 378
Mechanical properties of structures 3D printed with cementitious powders
Feng, P., Meng, X., Chen, J.-F., & Ye, L. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.05.132 · Cited by 369
Exploratory investigation of solid freeform construction
Pegna, J. (1997) · Automation in Construction · doi:10.1016/s0926-5805(96)00166-5 · Cited by 355
Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete
Zareiyan, B., & Khoshnevis, B. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.08.019 · Cited by 353
Mesh reinforcing method for 3D Concrete Printing
Marchment, T., & Sanjayan, J. (2020) · Automation in Construction · doi:10.1016/j.autcon.2019.102992 · Cited by 347
On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)
Li, V. C., Bos, F. P., Yu, K., McGee, W., Ng, T. Y., Figueiredo, S. C., Nefs, K., Mechtcherine, V., Nerella, V. N., Pan, J., et al. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106038 · Cited by 342
An LCA-based environmental impact assessment model for construction processes
Li, X., Zhu, Y., & Zhang, Z. (2009) · Building and Environment · doi:10.1016/j.buildenv.2009.08.010 · Cited by 334
Mechtcherine, V., Grafe, J., Nerella, V. N., Spaniol, E., Hertel, M., & Füssel, U. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.202 · Cited by 332
A self-reinforced cementitious composite for building-scale 3D printing
Soltan, D. G., & Li, V. C. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.03.017 · Cited by 330
Nematollahi, B., Vijay, P., Sanjayan, J., Nazari, A., Xia, M., Nerella, V. N., & Mechtcherine, V. (2018) · Materials · doi:10.3390/ma11122352 · Cited by 326
Chen, Y., Figueiredo, S. C., Li, Z., Chang, Z., Jansen, K., Çopuroğlu, O., & Schlangen, E. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106040 · Cited by 325
Panda, B., Lim, J. H., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.02.040 · Cited by 312
Lloret, E., Shahab, A. R., Linus, M., Flatt, R. J., Gramazio, F., Kohler, M., & Langenberg, S. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2014.02.011 · Cited by 311
Zhu, B., Pan, J., Nematollahi, B., Zhou, Z., Zhang, Y., & Sanjayan, J. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108088 · Cited by 305
Weng, Y., Li, M., Ruan, S., Wong, T. N., Tan, M. J., Ow Yeong, K. L., & Qian, S. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121245 · Cited by 305
Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model
Weng, Y., Li, M., Tan, M. J., & Qian, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.112 · Cited by 304
Panda, B., Noor Mohamed, N. A., Paul, S. C., Bhagath Singh, G., Tan, M. J., & Šavija, B. (2019) · Materials · doi:10.3390/ma12132149 · Cited by 301
Steel fibres reinforced 3D printed concrete: Influence of fibre sizes on mechanical performance
Pham, L., Tran, P., & Sanjayan, J. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118785 · Cited by 296
Suiker, A. S. J. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.01.010 · Cited by 288
Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107290 · Cited by 285
Mechanical characterization of 3D printable concrete
Rahul, A. V., Santhanam, M., Meena, H., & Ghani, Z. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116710 · Cited by 284
Self-citationCorrosion in reinforced concrete structures
Bohni, H. K. (2005) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845690434 · Cited by 282
Early age hydration of cement pastes with alkaline and alkali-free accelerators for sprayed concrete
Salvador, R. P., Cavalaro, S., Segura, I., de Figueiredo, A. D., & Pérez, J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.101 · Cited by 282
Marchment, T., Sanjayan, J., & Xia, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107684 · Cited by 281
Experimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete
Bos, F., Ahmed, Z., Jutinov, E., & Salet, T. (2017) · Materials · doi:10.3390/ma10111314 · Cited by 276
Yield stress criteria to assess the buildability of 3D concrete printing
Jayathilakage, R., Rajeev, P., & Sanjayan, J. G. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117989 · Cited by 275
3-D printing of concrete: Beyond horizons
Khan, M. S., Sanchez, F., & Zhou, H. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106070 · Cited by 260
Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing
Panda, B., Singh, G. B., Unluer, C., & Tan, M. J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.185 · Cited by 254
Opportunities and challenges for structural engineering of digitally fabricated concrete
Menna, C., Mata-Falcón, J., Bos, F. P., Vantyghem, G., Ferrara, L., Asprone, D., Salet, T., & Kaufmann, W. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106079 · Cited by 251
Environmental design guidelines for digital fabrication
Agustí-Juan, I., & Habert, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.10.190 · Cited by 250
Agustí-Juan, I., Müller, F., Hack, N., Wangler, T., & Habert, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.04.002 · Cited by 246
Structural failure during extrusion-based 3D printing processes
Wolfs, R. J. M., & Suiker, A. S. J. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03844-6 · Cited by 244
Triaxial compression testing on early age concrete for numerical analysis of 3D concrete printing
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103344 · Cited by 239
Li, Z., Li, W., & Ma, G. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.107796 · Cited by 233
Chen, M., Bo, L., Li, L., Cao, L., Huang, Y., Wang, S., Zhao, P., Lu, L., & Cheng, X. Y. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.107821 · Cited by 232
Ogura, H., Nerella, V. N., & Mechtcherine, V. (2018) · Materials · doi:10.3390/ma11081375 · Cited by 227
Alghamdi, H., Nair, S. A. O., & Neithalath, N. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107634 · Cited by 227
Ductility of 3D printed concrete reinforced with short straight steel fibers
Bos, F. P., Bosco, E., & Salet, T. A. M. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1548069 · Cited by 222
Effect of printing parameters in 3D concrete printing: Printing region and support structures
Tay, Y. W. D., Li, M., & Tan, M. J. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.04.007 · Cited by 219
Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing
Al-Qutaifi, S., Nazari, A., & Bagheri, A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.195 · Cited by 218
Mohan, M. K., Rahul, A. V., Van Tittelboom, K., & De Schutter, G. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106258 · Cited by 216
Self-citationMicrostructural Characterization of 3D Printed Cementitious Materials
Van Der Putten, J., Deprez, M., Cnudde, V., De Schutter, G., & Van Tittelboom, K. (2019) · Materials · doi:10.3390/ma12182993 · Cited by 215
Self-citationAn approach to develop printable strain hardening cementitious composites
Chaves Figueiredo, S., Romero Rodríguez, C., Ahmed, Z. Y., Bos, D. H., Xu, Y., Salet, T. M., Çopuroğlu, O., Schlangen, E., & Bos, F. P. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107651 · Cited by 211
Setting on demand for digital concrete – Principles, measurements, chemistry, validation
Reiter, L., Wangler, T., Anton, A., & Flatt, R. J. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106047 · Cited by 211
Khoshnevis, B., & Dutton, R. (1998) · Materials Technology · doi:10.1080/10667857.1998.11752766 · Cited by 207
The Civil Engineering Handbook
Chen, W. F., & Liew, J. Y. R. (2002) · CRC Press eBooks · doi:10.1201/9781420041217 · Cited by 202
Micro-cable reinforced geopolymer composite for extrusion-based 3D printing
Ma, G., Li, Z., Wang, L., & Bai, G. (2019) · Materials Letters · doi:10.1016/j.matlet.2018.09.159 · Cited by 196
Development of a Viable Concrete Printing Process
Lim, S., Buswell, R., Le, T., Wackrow, R., Austin, S., Gibb, A., & Thorpe, T. (2011) · Proceedings of the International Symposium on Automation and Robotics in Construction (IAARC) · doi:10.22260/isarc2011/0124 · Cited by 192
Liu, Z., Li, M., Weng, Y., Wong, T. N., & Tan, M. J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.252 · Cited by 179
Mechanical behavior of 3D printed mortar with recycled sand at early ages
Ding, T., Xiao, J., Qin, F., & Duan, Z. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118654 · Cited by 179
Evaluating the printability of concretes containing lightweight coarse aggregates
Rahul, A. V., & Santhanam, M. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103570 · Cited by 178
Self-citationHosseini, E., Zakertabrizi, M., Korayem, A. H., & Xu, G. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.03.008 · Cited by 172
Chen, Y., Chaves Figueiredo, S., Yalçinkaya, Ç., Çopuroğlu, O., Veer, F., & Schlangen, E. (2019) · Materials · doi:10.3390/ma12091374 · Cited by 167
Wu, Z., Wong, H. S., & Buenfeld, N. R. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.04.006 · Cited by 164
A feasible method for measuring the buildability of fresh 3D printing mortar
Yuan, Q., Li, Z., Zhou, D., Huang, T., Huang, H. J., Jiao, D., & Shi, C. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.326 · Cited by 161
Chen, Y., Li, Z., Figueiredo, S. C., Çopuroğlu, O., Veer, F. A., & Schlangen, E. (2019) · Applied Sciences · doi:10.3390/app9091809 · Cited by 160
Energy-saving potential of 3D printed concrete building with integrated living wall
He, Y., Zhang, Y., Zhang, C., & Zhou, H. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110110 · Cited by 160
Weng, Y., Lu, B. H., Li, M., Liu, Z., Tan, M. J., & Qian, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.039 · Cited by 158
Kruger, J., Cho, S., Zeranka, S., Viljoen, C., & van Zijl, G. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107660 · Cited by 158
Dressler, I., Freund, N., & Lowke, D. (2020) · Materials · doi:10.3390/ma13020374 · Cited by 158
The study of the structure rebuilding and yield stress of 3D printing geopolymer pastes
Zhang, D., Wang, D., Lin, X., & Zhang, T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.233 · Cited by 155
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.060 · Cited by 147
Additive manufacturing of cantilever - From masonry to concrete 3D printing
Carneau, P., Mesnil, R., Roussel, N., & Baverel, O. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103184 · Cited by 144
Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing
Weng, Y., Ruan, S., Li, M., Mo, L., Unluer, C., Tan, M. J., & Qian, S. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.05.053 · Cited by 141
Utilization of recycled glass for 3D concrete printing: rheological and mechanical properties
Ting, G. H. A., Tay, Y. W. D., Qian, Y., & Tan, M. J. (2019) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-019-00857-x · Cited by 140
Experimental investigation of contour crafting using ceramics materials
Khoshnevis, B., Bukkapatnam, S., Kwon, H., & Saito, J. (2001) · Rapid Prototyping Journal · doi:10.1108/13552540110365144 · Cited by 134
3D Printing Concrete on temporary surfaces: The design and fabrication of a concrete shell structure
Costanzi, C. B., Ahmed, Z., Schipper, H. R., Bos, F. P., Knaack, U., & Wolfs, R. J. M. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.06.013 · Cited by 118
Claßen, M., Ungermann, J., & Sharma, R. (2020) · Applied Sciences · doi:10.3390/app10113791 · Cited by 116
Pumping of Fresh Concrete: Insights and Challenges
Schutter, G. D., & Feys, D. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.15 · Cited by 115
Effect of testing procedures on buildability properties of 3D-printable concrete
Casagrande, L., Esposito, L., Menna, C., Asprone, D., & Auricchio, F. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118286 · Cited by 115
3D Printing Concrete with Reinforcement
Bos, F. P., Ahmed, Z., Wolfs, R. J. M., & Salet, T. A. M. (2017) · Springer eBooks · doi:10.1007/978-3-319-59471-2_283 · Cited by 114
Rheological Property Criteria for Buildable 3D Printing Concrete
Jeong, H., Han, S., Choi, S., Lee, Y. J., Yi, S. T., & Kim, K. S. (2019) · Materials · doi:10.3390/ma12040657 · Cited by 111
Nair, S. A. O., Alghamdi, H., Arora, A., Mehdipour, I., Sant, G., & Neithalath, N. (2019) · Journal of the American Ceramic Society · doi:10.1111/jace.16305 · Cited by 108
Jayathilakage, R., Sanjayan, J., & Rajeev, P. (2019) · Materials and Structures · doi:10.1617/s11527-019-1322-4 · Cited by 108
Formwork for concrete structures
Peurifoy, R. L. (1964) · Medical Entomology and Zoology · Cited by 107
Method for the Enhancement of Buildability and Bending Resistance of 3D Printable Tailing Mortar
Li, Z., Li, W., & Ma, G. (2018) · International Journal of Concrete Structures and Materials · doi:10.1186/s40069-018-0269-0 · Cited by 107
Nair, S. A. O., Panda, S., Santhanam, M., Sant, G., & Neithalath, N. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103671 · Cited by 105
Malaeb, Z., Alsakka, F., & Hamzeh, F. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815481-6.00006-3 · Cited by 99
Active control of properties of concrete: a (p)review
Schutter, G. D., & Lesage, K. (2018) · Materials and Structures · doi:10.1617/s11527-018-1256-2 · Cited by 97
Material Design and Performance Evaluation of Foam Concrete for Digital Fabrication
Markin, S., Nerella, V. N., Schröfl, C., Guseynova, G., & Mechtcherine, V. (2019) · Materials · doi:10.3390/ma12152433 · Cited by 96
Ma, G., Li, Y. F., Li, W., Zhang, J., & Li, Z. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117982 · Cited by 91
Methods of enhancing strength of geopolymer produced from powder-based 3D printing process
Xia, M., & Sanjayan, J. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.05.100 · Cited by 85
Putten, J. V. D., Azima, M., den Heede, P. V., Mullem, T. V., Snoeck, D., Carminati, C., Hovind, J., Trtik, P., Schutter, G. D., & Tittelboom, K. V. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119587 · Cited by 72
Investigation of concrete mixtures for additive construction
Rushing, T. S., Al‐Chaar, G. K., Eick, B., Burroughs, J. F., Shannon, J. D., Barna, L. A., & Case, M. P. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-09-2015-0124 · Cited by 70
Bond Strength in 3D Printed Geopolymer Mortar
Panda, B., Mohamed, N. A. N., Tay, Y. W. D., & Tan, M. J. (2018) · Rilem bookseries · doi:10.1007/978-3-319-99519-9_18 · Cited by 38
Bertelsen, I. M. G., Ottosen, L. M., & Fischer, G. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.268 · Cited by 38
Evaluating the Influence of Aggregate Content on Pumpability of 3D Printable Concrete
Mohan, M. K., Rahul, A. V., Tittelboom, K. V., & Schutter, G. D. (2020) · Rilem bookseries · doi:10.1007/978-3-030-49916-7_34 · Cited by 32
Self-citationCao, X., & Li, Z. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815481-6.00010-5 · Cited by 16
Mueller, R. P., Townsend, I. I., Tamasy, G. J., Evers, C. J., Sibille, L., Edmunson, J. E., Fiske, M. R., Fikes, J., & Case, M. P. (2018) · ASCE International Conference on Engineering, Science, Construction, and Operations in Challenging Environments (Earth and Space) · doi:10.1061/9780784481899.020 · Cited by 14
Cited by
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Technology readiness: A global snapshot of 3D concrete printing and the frontiers for development
Ma, G., Buswell, R., Leal da Silva, W. R., Wang, L., Xu, J., & Jones, S. Z. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106774 · Cited by 280
Metadata
- Authors
- Mohan, M. K., Rahul, A. V., De Schutter, G., & Van Tittelboom, K.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 115
- Pages
- 103855
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W3093614298
- Cited by
- 384
- References
- 139
- FWCI
- 24.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
