The DOI matches its Crossref record; 139 of the 139 references it cites were found in a registry or an index.
A critical review on the fused deposition modeling of thermoplastic polymer composites
Abstract
Abstract Fused Deposition Modeling (FDM) is a widely used additive manufacturing technology for fabrication of complex geometric parts using thermoplastic polymers. The quality issues and inferior properties of fabricated parts limited this process to manufacture parts for industrial level applications. Reinforcing the polymer with nanoparticles, short fibers or continuous fibers improve mechanical, thermal and electrical properties compared to the neat polymer. Several works have been carried out since last two decades to print quality products through FDM by using composite materials. The success of expanding this technique to industrial applications depends on the preparation of printable composite feedstock filament and printing without defects. This article reviews the challenges involved in the preparation of composite feedstock filaments and printing issues during the printing of nano composites, short and continuous fiber composites. The printing process of various thermoplastic composites ranging from amorphous to crystalline polymers is discussed. Also, detailed explanation is given about the analytical and numerical models used for simulating the FDM printing process and for estimating the mechanical properties of the printed parts. This critical review mainly helps the young researchers working in the area of processing of composite materials via 3D printing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Average stress in matrix and average elastic energy of materials with misfitting inclusions
Mori, T., & Tanaka, K. (1973) · Acta Metallurgica · doi:10.1016/0001-6160(73)90064-3 · Cited by 8,189
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Chacón, J. M., Caminero, M. A., García-Plaza, E., & Núñez, P. J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.065 · Cited by 1,603
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
N. Turner, B., Strong, R., & A. Gold, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,450
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
The mechanics of graphene nanocomposites: A review
Young, R. J., Kinloch, I. A., Gong, L., & Novoselov, K. S. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.05.005 · Cited by 1,294
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,277
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Yang, C., Wang, Q., & Li, D. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.032 · Cited by 1,162
Material issues in additive manufacturing: A review
Singh, S., Ramakrishna, S., & Singh, R. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.11.006 · Cited by 899
Wu, W., Geng, P., Li, G., Zhao, D., Zhang, H., & Zhao, J. (2015) · Materials · doi:10.3390/ma8095271 · Cited by 881
Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
An investigation into 3D printing of fibre reinforced thermoplastic composites
Blok, L. G., Longana, M. L., Yu, H., & Woods, B. K. S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.039 · Cited by 866
Fused deposition modeling with polypropylene
Carneiro, O. S., Silva, A. F., & Gomes, R. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.053 · Cited by 851
Dickson, A. N., Barry, J. N., McDonnell, K. A., & Dowling, D. P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.06.004 · Cited by 792
A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
Leigh, S. J., Bradley, R. J., Purssell, C. P., Billson, D. R., & Hutchins, D. A. (2012) · PLoS ONE · doi:10.1371/journal.pone.0049365 · Cited by 787
Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770
Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process
Bellehumeur, C., Li, L., Sun, Q., & Gu, P. (2004) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(04)70071-7 · Cited by 768
Ferreira, R. T. L., Amatte, I. C., Dutra, T. A., & Bürger, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.05.013 · Cited by 764
Fused filament fabrication of fiber-reinforced polymers: A review
Brenken, B., Barocio, E., Favaloro, A., Kunc, V., & Pipes, R. B. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.01.002 · Cited by 737
Short fiber reinforced composites for fused deposition modeling
Zhong, W., Li, F., Zhang, Z., Song, L., & Li, Z. (2001) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(00)01810-4 · Cited by 721
Jakus, A. E., Secor, E. B., Rutz, A. L., Jordan, S. W., Hersam, M. C., & Shah, R. N. (2015) · ACS Nano · doi:10.1021/acsnano.5b01179 · Cited by 710
Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
Li, N., Li, Y., & Liu, S. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.07.025 · Cited by 707
Tandon, G. P., & Weng, G. J. (1984) · Polymer Composites · doi:10.1002/pc.750050413 · Cited by 685
Kabir, S. M. F., Mathur, K., & Seyam, A.-F. M. (2020) · Composite Structures · doi:10.1016/j.compstruct.2019.111476 · Cited by 678
FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties
Mazzanti, V., Malagutti, L., & Mollica, F. (2019) · Polymers · doi:10.3390/polym11071094 · Cited by 666
Yang, C., Tian, X., Li, D., Cao, Y., Zhao, F., & Shi, C. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.04.027 · Cited by 662
Ning, F., Cong, W., Hu, Y., & Wang, H. (2017) · Journal of Composite Materials · doi:10.1177/0021998316646169 · Cited by 632
Woodfield, T. B. F., Malda, J., de Wijn, J., Péters, F., Riesle, J., & van Blitterswijk, C. A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.056 · Cited by 618
Weng, Z., Wang, J., Senthil, T., & Wu, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.04.045 · Cited by 609
Goh, G. D., Dikshit, V., Nagalingam, A. P., Goh, G. L., Agarwala, S., Sing, S. L., Wei, J., & Yeong, W. Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.021 · Cited by 604
Melenka, G. W., Cheung, B. K. O., Schofield, J. S., Dawson, M. R., & Carey, J. P. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.07.018 · Cited by 597
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., & Tadimeti, J. G. D. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.106956 · Cited by 580
Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques
Dawoud, M., Taha, I., & Ebeid, S. J. (2016) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2015.11.002 · Cited by 566
Additively manufactured carbon fiber-reinforced composites: State of the art and perspective
van de Werken, N., Tekinalp, H., Khanbolouki, P., Ozcan, S., Williams, A., & Tehrani, M. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.100962 · Cited by 566
Multiscale Methods for Composites: A Review
Kanouté, P., Boso, D. P., Chaboche, J. L., & Schrefler, B. A. (2009) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-008-9028-8 · Cited by 563
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
Masood, S. H., & Song, W. Q. (2004) · Materials & Design · doi:10.1016/j.matdes.2004.02.009 · Cited by 543
Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts
Domingo-Espin, M., Puigoriol-Forcada, J. M., Garcia-Granada, A.-A., Llumà, J., Borros, S., & Reyes, G. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.074 · Cited by 535
Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials
Torrado Perez, A. R., Roberson, D. A., & Wicker, R. B. (2014) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-014-9803-9 · Cited by 523
3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
Yang, C., Tian, X., Liu, T., Cao, Y., & Li, D. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2015-0098 · Cited by 515
Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
Nikzad, M., Masood, S. H., & Sbarski, I. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.01.056 · Cited by 503
The importance of carbon fiber to polymer additive manufacturing
Love, L. J., Kunc, V., Rios, O., Duty, C. E., Elliott, A. M., Post, B. K., Smith, R. J., & Blue, C. A. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.212 · Cited by 493
Casavola, C., Cazzato, A., Moramarco, V., & Pappalettere, C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.11.009 · Cited by 493
Fused deposition modelling with ABS–graphene nanocomposites
Dul, S., Fambri, L., & Pegoretti, A. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.03.013 · Cited by 491
Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling
Kalita, S. J., Bose, S., Hosick, H. L., & Bandyopadhyay, A. (2003) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(03)00052-3 · Cited by 488
Nanofiber‐reinforced polymers prepared by fused deposition modeling
Shofner, M. L., Lozano, K., Rodríguez‐Macías, F. J., & Barrera, E. V. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12496 · Cited by 484
Hwang, S., Reyes, E. I., Moon, K.-S., Rumpf, R. C., & Kim, N. S. (2015) · Journal of Electronic Materials · doi:10.1007/s11664-014-3425-6 · Cited by 482
3D Printable Graphene Composite
Wei, X., Li, D., Jiang, W., Gu, Z., Wang, X., Zhang, Z., & Sun, Z. (2015) · Scientific Reports · doi:10.1038/srep11181 · Cited by 481
Christ, J. F., Aliheidari, N., Ameli, A., & Pötschke, P. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.011 · Cited by 481
3D Printed Graphene Based Energy Storage Devices
Foster, C. W., Down, M. P., Zhang, Y., Ji, X., Rowley-Neale, S. J., Smith, G. C., Kelly, P. J., & Banks, C. E. (2017) · Scientific Reports · doi:10.1038/srep42233 · Cited by 471
Liu, Z., Wang, Y., Wu, B., Cui, C., Guo, Y., & Yan, C. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03332-x · Cited by 469
Composites by rapid prototyping technology
Kumar, S., & Kruth, J.-P. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.07.045 · Cited by 463
Additive Manufacturing of Biomaterials, Tissues, and Organs
Zadpoor, A. A., & Malda, J. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1719-y · Cited by 462
Mohan, N., Senthil, P., Vinodh, S., & Jayanth, N. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1274490 · Cited by 457
Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites
Rahim, T. N. A. T., Abdullah, A. M., & Md Akil, H. (2019) · Polymer Reviews · doi:10.1080/15583724.2019.1597883 · Cited by 452
Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts
Cantrell, J. T., Rohde, S., Damiani, D., Gurnani, R., DiSandro, L., Anton, J., Young, A., Jerez, A., Steinbach, D., Kroese, C., et al. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2016-0042 · Cited by 433
Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Wang, Q., Dilmurat, A., Li, D., & Ziegmann, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.139 · Cited by 432
Sustainability Metrics: Life Cycle Assessment and Green Design in Polymers
Tabone, M. D., Cregg, J. J., Beckman, E. J., & Landis, A. E. (2010) · Environmental Science & Technology · doi:10.1021/es101640n · Cited by 416
Additive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential
Goh, G. D., Agarwala, S., Goh, G. L., Dikshit, V., Sing, S. L., & Yeong, W. Y. (2017) · Aerospace Science and Technology · doi:10.1016/j.ast.2016.12.019 · Cited by 413
Torrado, A. R., Shemelya, C. M., English, J. D., Lin, Y., Wicker, R. B., & Roberson, D. A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.02.001 · Cited by 406
Extrusion-based additive manufacturing of PEEK for biomedical applications
Vaezi, M., & Yang, S. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097053 · Cited by 406
Structure and mechanical behavior of Big Area Additive Manufacturing (BAAM) materials
Duty, C. E., Kunc, V., Compton, B., Post, B., Erdman, D., Smith, R., Lind, R., Lloyd, P., & Love, L. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2015-0183 · Cited by 375
Croccolo, D., De Agostinis, M., & Olmi, G. (2013) · Computational Materials Science · doi:10.1016/j.commatsci.2013.06.041 · Cited by 369
What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers
Duty, C., Ajinjeru, C., Kishore, V., Compton, B. G., Hmeidat, N. S., Chen, X., Liu, P., Hassen, A. A., Lindahl, J. M., & Kunc, V. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.008 · Cited by 367
Han, X., Yang, D., Yang, C., Spintzyk, S., Scheideler, L., Li, P., Li, D., Geis-Gerstorfer, J., & Rupp, F. (2019) · Journal of Clinical Medicine · doi:10.3390/jcm8020240 · Cited by 361
Crystallization kinetics of polyetheretherketone (peek) matrices
Velisaris, C. N., & Seferis, J. C. (1986) · Polymer Engineering and Science · doi:10.1002/pen.760262208 · Cited by 360
Rayegani, F., & Onwubolu, G. C. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-5835-2 · Cited by 358
Fabrication of highly conductive graphene flexible circuits by 3D printing
Zhang, D., Chi, B., Li, B., Gao, Z., Du, Y., Guo, J., & Wei, J. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.03.014 · Cited by 336
3D printing electronic components and circuits with conductive thermoplastic filament
Flowers, P. F., Reyes, C., Ye, S., Kim, M. J., & Wiley, B. J. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.002 · Cited by 333
Electrically conductive filament for 3D-printed circuits and sensors
Kwok, S. W., Goh, K. H. H., Tan, Z. D., Tan, S. T. M., Tjiu, W. W., Soh, J. Y., Ng, Z. J. G., Chan, Y. Z., Hui, H. K., & Goh, K. E. J. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.07.001 · Cited by 332
A model research for prototype warp deformation in the FDM process
Wang, T.-M., Xi, J.-T., & Jin, Y. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0556-9 · Cited by 331
Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing
Goyanes, A., Chang, H., Sedough, D., Hatton, G. B., Wang, J., Buanz, A., Gaisford, S., & Basit, A. W. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.10.039 · Cited by 330
Zhang, Y., & Chou, K. (2008) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/09544054jem990 · Cited by 321
Caminero, M. Á., Chacón, J. M., Plaza, E. G., López, P. J. N., Reverte, J. M., & Bécar, J. P. (2019) · Polymers · doi:10.3390/polym11050799 · Cited by 319
Lewicki, J. P., Rodriguez, J. N., Zhu, C., Worsley, M. A., Wu, A. S., Kanarska, Y., Horn, J. D., Duoss, E. B., Ortega, J. M., Elmer, W., et al. (2017) · Scientific Reports · doi:10.1038/srep43401 · Cited by 318
Zhang, J., Zhao, S., Zhu, M., Zhu, Y., Zhang, Y., Liu, Z., & Zhang, C. (2014) · J. Mater. Chem. B · doi:10.1039/c4tb01063a · Cited by 317
Welding of 3D-printed carbon nanotube–polymer composites by locally induced microwave heating
Sweeney, C. B., Lackey, B. A., Pospisil, M. J., Achee, T. C., Hicks, V. K., Moran, A. G., Teipel, B. R., Saed, M. A., & Green, M. J. (2017) · Science Advances · doi:10.1126/sciadv.1700262 · Cited by 313
3D printing for chemical, pharmaceutical and biological applications
Capel, A. J., Rimington, R. P., Lewis, M. P., & Christie, S. D. R. (2018) · Nature Reviews Chemistry · doi:10.1038/s41570-018-0058-y · Cited by 312
Composite Modeling and Analysis for Fabrication of FDM Prototypes with Locally Controlled Properties
Li, L., Sun, Q., Bellehumeur, C. T., & Gu, P. (2002) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(02)70139-4 · Cited by 306
Additive layer manufacturing of poly (ether ether ketone) via FDM
Rinaldi, M., Ghidini, T., Cecchini, F., Brandao, A., & Nanni, F. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.03.029 · Cited by 301
Luo, M., Tian, X., Shang, J., Zhu, W., Li, D., & Qin, Y. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.03.020 · Cited by 297
Torres, J., Cole, M., Owji, A., DeMastry, Z., & Gordon, A. P. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2014-0083 · Cited by 295
Recent developments in 3D printable composite materials
Kalsoom, U., Nesterenko, P. N., & Paull, B. (2016) · RSC Advances · doi:10.1039/c6ra11334f · Cited by 294
Gurrala, P. K., & Regalla, S. P. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.913400 · Cited by 290
Domínguez-Robles, J., Martin, N. K., Fong, M. L., Stewart, S. A., Irwin, N. J., Rial-Hermida, M. I., Donnelly, R. F., & Larrañeta, E. (2019) · Pharmaceutics · doi:10.3390/pharmaceutics11040165 · Cited by 281
Mechanical Properties Optimization of Poly-Ether-Ether-Ketone via Fused Deposition Modeling
Deng, X., Zeng, Z., Peng, B., Yan, S., & Ke, W. (2018) · Materials · doi:10.3390/ma11020216 · Cited by 265
Fracture resistance measurement of fused deposition modeling 3D printed polymers
Aliheidari, N., Tripuraneni, R., Ameli, A., & Nadimpalli, S. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.03.016 · Cited by 244
Ivanov, E., Kotsilkova, R., Xia, H., Chen, Y., Donato, R. K., Donato, K., Godoy, A. P., Di Maio, R., Silvestre, C., Cimmino, S., et al. (2019) · Applied Sciences · doi:10.3390/app9061209 · Cited by 233
Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites
Castles, F., Isakov, D., Lui, A., Lei, Q., Dancer, C. E. J., Wang, Y., Janurudin, J. M., Speller, S. C., Grovenor, C. R. M., & Grant, P. S. (2016) · Scientific Reports · doi:10.1038/srep22714 · Cited by 231
Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene
Stoof, D., & Pickering, K. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.10.005 · Cited by 228
Characterization of the mesostructure of fused‐deposition acrylonitrile‐butadiene‐styrene materials
Rodriguez, J. F., Thomas, J. P., & Renaud, J. E. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337056 · Cited by 226
Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites
Berretta, S., Davies, R., Shyng, Y. T., Wang, Y., & Ghita, O. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.08.024 · Cited by 218
Three-Dimensional Printed Electrode and Its Novel Applications in Electronic Devices
Foo, C. Y., Lim, H. N., Mahdi, M. A., Wahid, M. H., & Huang, N. M. (2018) · Scientific Reports · doi:10.1038/s41598-018-25861-3 · Cited by 213
Mohamed, O. A., Masood, S. H., & Bhowmik, J. (2016) · Applied Mathematical Modelling · doi:10.1016/j.apm.2016.06.055 · Cited by 210
Current Trends of Additive Manufacturing in the Aerospace Industry
Kumar, L. J., & Krishnadas Nair, C. G. (2017) · Advances in 3D Printing & Additive Manufacturing Technologies · doi:10.1007/978-981-10-0812-2_4 · Cited by 210
Zhang, H., Mao, X., Du, Z., Jiang, W., Han, X., Zhao, D., Han, D., & Li, Q. (2016) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2016.1145532 · Cited by 208
Elastic properties of 3D printed fibre-reinforced structures
Al Abadi, H., Thai, H.-T., Paton-Cole, V., & Patel, V. I. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.03.051 · Cited by 208
Thermal analysis of additive manufacturing of large-scale thermoplastic polymer composites
Compton, B. G., Post, B., Duty, C., Love, L. J., & Kunc, V. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.07.006 · Cited by 206
Costa, S. F., Duarte, F. M., & Covas, J. A. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.984042 · Cited by 203
Zhang, W., Cotton, C., Sun, J., Heider, D., Gu, B., Sun, B., & Chou, T.-W. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.11.018 · Cited by 203
A model research for prototype warp deformation in the FDM process
Wang, T.-M., Xi, J.-T., & Jin, Y. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0878-7 · Cited by 199
A study of melt flow analysis of an ABS-Iron composite in fused deposition modelling process
Mostafa, N., Syed, H. M., Igor, S., & Andrew, G. (2009) · Tsinghua Science and Technology · doi:10.1016/s1007-0214(09)70063-x · Cited by 191
Polyether ether ketone (PEEK) and its 3D printed implants applications in medical field: An overview
Haleem, A., & Javaid, M. (2019) · Clinical Epidemiology and Global Health · doi:10.1016/j.cegh.2019.01.003 · Cited by 190
Feedstock material property – process relationships in fused deposition of ceramics (FDC)
Venkataraman, N., Rangarajan, S., Matthewson, M. J., Harper, B., Safari, A., Danforth, S. C., Wu, G., Langrana, N., Guceri, S., & Yardimci, A. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010373344 · Cited by 188
Prashantha, K., & Roger, F. (2017) · Journal of Macromolecular Science, Part A · doi:10.1080/10601325.2017.1250311 · Cited by 184
Composite 3D printing for the small size unmanned aerial vehicle structure
Azarov, A. V., Antonov, F. K., Golubev, M. V., Khaziev, A. R., & Ushanov, S. A. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.03.073 · Cited by 182
Deposition direction-dependent failure criteria for fused deposition modeling polycarbonate
Hill, N., & Haghi, M. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2013-0039 · Cited by 181
Additive manufacturing of polymer composites: Processing and modeling approaches
El Moumen, A., Tarfaoui, M., & Lafdi, K. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.04.029 · Cited by 178
Shofner, M. L., Rodrı́guez-Macı́as, F. J., Vaidyanathan, R., & Barrera, E. V. (2003) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.07.002 · Cited by 176
Rymansaib, Z., Iravani, P., Emslie, E., Medvidović‐Kosanović, M., Sak‐Bosnar, M., Verdejo, R., & Marken, F. (2016) · Electroanalysis · doi:10.1002/elan.201600017 · Cited by 176
Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review
Klippstein, H., Diaz De Cerio Sanchez, A., Hassanin, H., Zweiri, Y., & Seneviratne, L. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700552 · Cited by 176
Spoerk, M., Sapkota, J., Weingrill, G., Fischinger, T., Arbeiter, F., & Holzer, C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700143 · Cited by 169
Zhu, D., Ren, Y., Liao, G., Jiang, S., Liu, F., Guo, J., & Xu, G. J. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45332 · Cited by 164
Raster angle mechanics in fused deposition modelling
Huang, B., & Singamneni, S. (2014) · Journal of Composite Materials · doi:10.1177/0021998313519153 · Cited by 163
Bustillos, J., Montero, D., Nautiyal, P., Loganathan, A., Boesl, B., & Agarwal, A. (2018) · Polymer Composites · doi:10.1002/pc.24422 · Cited by 160
Rapid-prototyped PLGA/β-TCP/hydroxyapatite nanocomposite scaffolds in a rabbit femoral defect model
Kim, J., McBride, S., Tellis, B. C., Alvarez, P., Song, Y. H., Dean, D. D., Sylvia, V. L., Elgendy, H. M., Ong, J. L., & Hollinger, J. O. (2012) · Biofabrication · doi:10.1088/1758-5082/4/2/025003 · Cited by 153
Guessasma, S., Belhabib, S., & Nouri, H. (2019) · Polymers · doi:10.3390/polym11071220 · Cited by 151
Spoerk, M., Arbeiter, F. J., Raguž, I., Weingrill, G., Fischinger, T., Traxler, G., Schuschnigg, S., Cardon, L., & Holzer, C. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800179 · Cited by 149
Spoerk, M., Savandaiah, C., Arbeiter, F. J., Sapkota, J., & Holzer, C. (2017) · Polymer Composites · doi:10.1002/pc.24701 · Cited by 133
Fabrication of PCL/β‐TCP scaffolds by 3D mini‐screw extrusion printing
Dávila, J. L., de Freitas, M. S., Neto, P. I., Silveira, Z. D. C., da Silva, J. V. L., & d’Ávila, M. A. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.43031 · Cited by 130
Highly loaded fiber filled polymers for material extrusion: A review of current understanding
Fallon, J. J., McKnight, S. H., & Bortner, M. J. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100810 · Cited by 125
Singh, R., Singh, S., & Fraternali, F. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.05.038 · Cited by 121
Thermal characteristics of a new metal/polymer material for FDM rapid prototyping process
Masood, S. H., & Song, W. (2005) · Assembly Automation · doi:10.1108/01445150510626451 · Cited by 114
Cicala, G., Latteri, A., Curto, B. D., Russo, A. L., Recca, G., & Farè, S. (2017) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.5000343 · Cited by 114
Fabrication and properties of novel polymer-metal composites using fused deposition modeling
Ryder, M. A., Lados, D. A., Iannacchione, G. S., & Peterson, A. M. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.01.049 · Cited by 107
Mechanical properties analysis of polyetherimide parts fabricated by fused deposition modeling
Jiang, S., Liao, G., Xu, D., Liu, F., Li, W., Cheng, Y., Li, Z., & Xu, G. J. (2018) · High Performance Polymers · doi:10.1177/0954008317752822 · Cited by 84
Kabirian, F., Ditkowski, B., Zamanian, A., Heying, R., & Mozafari, M. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2018.04.167 · Cited by 76
On the wear properties of Nylon6-SiC-Al 2 O 3 based fused deposition modelling feed stock filament
Singh, R., Singh, N., Amendola, A., & Fraternali, F. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.03.042 · Cited by 69
Nasirov, A., & Fidan, I. (2020) · Mechanics of Materials · doi:10.1016/j.mechmat.2020.103372 · Cited by 68
Investigations for melt flow index of Nylon6-Fe composite based hybrid FDM filament
Garg, H. K., & Singh, R. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2014-0056 · Cited by 43
Experimental analysis of the tensile property of FFF-printed elastomers
Lin, X., Coates, P. D., Hebda, M., Wang, R., Lu, Y., & Zhang, L. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106687 · Cited by 39
THE DURABILITY OF LARGE-SCALE ADDITIVE MANUFACTURING COMPOSITE MOLDS
Post, B., Love, L. J., Duty, C., Vaidya, U. K., Pipes, R. B., & Kunc, V. (2016) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 37
Additive manufacturing of carbon fiber-reinforced thermoplastic composites
DeNardo, N. M. (2016) · Purdue e-Pubs (Purdue University System) · Cited by 31
Bedi, P., Singh, R., & Ahuja, I. S. (2019) · Engineering Research Express · doi:10.1088/2631-8695/ab29ab · Cited by 16
Cited by
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
A review of artificial neural networks in the constitutive modeling of composite materials
Liu, X., Tian, S., Tao, F., & Yu, W. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109152 · Cited by 475
Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saleh Alghamdi, S., John, S., Roy Choudhury, N., & Dutta, N. K. (2021) · Polymers · doi:10.3390/polym13050753 · Cited by 469
A review on voids of 3D printed parts by fused filament fabrication
Tao, Y., Kong, F., Li, Z., Zhang, J., Zhao, X., Yin, Q., Xing, D., & Li, P. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.10.108 · Cited by 443
Recent Advances in 3D Printing of Smart Scaffolds for Bone Tissue Engineering and Regeneration
Yuan, X., Zhu, W., Yang, Z., He, N., Chen, F., Han, X., & Zhou, K. (2024) · Advanced Materials · doi:10.1002/adma.202403641 · Cited by 339
Metadata
- Authors
- Penumakala, P. K., Santo, J., & Thomas, A.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 201
- Pages
- 108336
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W3080264218
- Cited by
- 704
- References
- 139
- FWCI
- 28.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.