The DOI matches its Crossref record; 210 of the 210 references it cites were found in a registry or an index.
An Overview on Materials and Techniques in 3D Bioprinting Toward Biomedical Application
Open accessAbstract
Three-dimensional (3D) bioprinting, an additive manufacturing based technique of biomaterials fabrication, is an innovative and auspicious strategy in medical and pharmaceutical fields. The ability of producing regenerative tissues and organs has made this technology a pioneer to the creation of artificial multi-cellular tissues/organs. A broad variety of biomaterials is currently being utilized in 3D bioprinting as well as multiple techniques employed by researchers. In this review, we demonstrate the most common and novel biomaterials in 3D bioprinting technology further with introducing the related techniques that are commonly taking into account by researchers. In addition, an attempt has been accomplished to hand over the most relevant application of 3D bioprinting techniques such as tissue regeneration, cancer investigations, etc. by presenting the most important works. The main aim of this review paper is to emphasis on strengths and limitations of existence biomaterials and 3D bioprinting techniques in order to carry out a comparison through them.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Alginate hydrogels as synthetic extracellular matrix materials
Rowley, J. A., Madlambayan, G., & Mooney, D. J. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00107-0 · Cited by 2,342
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Fibrinogen and fibrin structure and functions
MOSESSON, M. W. (2005) · Journal of Thrombosis and Haemostasis · doi:10.1111/j.1538-7836.2005.01365.x · Cited by 1,695
An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering
Gentile, P., Chiono, V., Carmagnola, I., & Hatton, P. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15033640 · Cited by 1,593
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Mohamed, O. A., Masood, S. H., & Bhowmik, J. L. (2015) · Advances in Manufacturing · doi:10.1007/s40436-014-0097-7 · Cited by 1,481
Bioactive modification of poly (ethylene glycol) hydrogels for tissue engineering
Zhu, J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.02.044 · Cited by 1,457
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Polymeric Scaffolds for Bone Tissue Engineering
Liu, X., & Ma, P. X. (2004) · Annals of Biomedical Engineering · doi:10.1023/b:abme.0000017544.36001.8e · Cited by 1,345
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,318
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,277
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
Hutmacher, D. W., Sittinger, M., & Risbud, M. V. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.05.005 · Cited by 1,121
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Recent advances in carbon-fiber-reinforced thermoplastic composites: A review
Yao, S.-S., Jin, F., Rhee, K. Y., Hui, D., & Park, S. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.12.007 · Cited by 976
Huang, C.-F., Chang, Y.-J., Hsueh, Y.-Y., Huang, C.-W., Wang, D.-H., Huang, T.-C., Wu, Y.-T., Su, F.-C., Hughes, M., Chuong, C.-M., et al. (2016) · Scientific Reports · doi:10.1038/srep31257 · Cited by 941
Material issues in additive manufacturing: A review
Singh, S., Ramakrishna, S., & Singh, R. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.11.006 · Cited by 899
Wu, W., Geng, P., Li, G., Zhao, D., Zhang, H., & Zhao, J. (2015) · Materials · doi:10.3390/ma8095271 · Cited by 881
A comprehensive review on droplet-based bioprinting: Past, present and future
Gudapati, H., Dey, M., & Ozbolat, I. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.012 · Cited by 859
Photonic crystal nanocavity assisted rejection ratio tunable notch microwave photonic filter
Long, Y., Xia, J., Zhang, Y., Dong, J., & Wang, J. (2017) · Scientific Reports · doi:10.1038/srep40223 · Cited by 842
The effect of scaffold degradation rate on three-dimensional cell growth and angiogenesis
Sung, H.-J., Meredith, C., Johnson, C., & Galis, Z. S. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.066 · Cited by 804
Effect of Pore Size and Void Fraction on Cellular Adhesion, Proliferation, and Matrix Deposition
Zeltinger, J., Sherwood, J. K., Graham, D. A., Müeller, R., & Griffith, L. G. (2001) · Tissue Engineering · doi:10.1089/107632701753213183 · Cited by 794
Biodegradable Materials for Bone Repair and Tissue Engineering Applications
Sheikh, Z., Najeeb, S., Khurshid, Z., Verma, V., Rashid, H., & Glogauer, M. (2015) · Materials · doi:10.3390/ma8095273 · Cited by 782
Rapid manufacturing of metal components by laser forming
Santos, E. C., Shiomi, M., Osakada, K., & Laoui, T. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.09.005 · Cited by 740
Designing Biomaterials for 3D Printing
Guvendiren, M., Molde, J., Soares, R. M. D., & Kohn, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00121 · Cited by 732
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & D'Lima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 686
Are animal models predictive for humans?
Shanks, N., Greek, R., & Greek, J. (2009) · Philosophy, Ethics, and Humanities in Medicine · doi:10.1186/1747-5341-4-2 · Cited by 677
Jang, J., Park, H.-J., Kim, S.-W., Kim, H., Park, J. Y., Na, S. J., Kim, H. J., Park, M. N., Choi, S. H., Park, S. H., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.026 · Cited by 673
2002 ASME International Mechanical Engineering Congress and Exposition
Wu, S. F. (2003) · The Journal of the Acoustical Society of America · doi:10.1121/1.1586287 · Cited by 647
Polyethylene glycol-coated biocompatible surfaces
Alcantar, N. A., Aydil, E. S., & Israelachvili, J. N. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(20000905)51:3<343::aid-jbm7>3.0.co;2-d · Cited by 634
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
Xu, T., Binder, K. W., Albanna, M. Z., Dice, D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 631
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Cheang, P., Abu Bakar, M. S., & Cha, S. W. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00131-5 · Cited by 625
Woodfield, T. B. F., Malda, J., de Wijn, J., Péters, F., Riesle, J., & van Blitterswijk, C. A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.056 · Cited by 618
Recent advances in bioprinting techniques: approaches, applications and future prospects
Li, J., Chen, M., Fan, X., & Zhou, H. (2016) · Journal of Translational Medicine · doi:10.1186/s12967-016-1028-0 · Cited by 608
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
The dynamics of the piezo inkjet printhead operation☆
Wijshoff, H. (2010) · Physics Reports · doi:10.1016/j.physrep.2010.03.003 · Cited by 593
Tissue engineering by self-assembly and bio-printing of living cells
Jakab, K., Norotte, C., Marga, F., Murphy, K., Vunjak-Novakovic, G., & Forgacs, G. (2010) · Biofabrication · doi:10.1088/1758-5082/2/2/022001 · Cited by 593
A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Ding, Z., Wang, B., Moreno, I., Dupláková, N., Simon, S., Carraro, N., Reemmer, J., Pěnčík, A., Chen, X., Tejos, R., et al. (2013) · Nature Communications · doi:10.1038/ncomms2452 · Cited by 554
Kundu, J., Shim, J.-H., Jang, J., Kim, S.-W., & Cho, D.-W. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1682 · Cited by 552
UV-induced DNA damage, repair, mutations and oncogenic pathways in skin cancer
de Gruijl, F. R., van Kranen, H. J., & Mullenders, L. H. F. (2001) · Journal of Photochemistry and Photobiology B: Biology · doi:10.1016/s1011-1344(01)00199-3 · Cited by 544
Evaluation of hydrogels for bio‐printing applications
Murphy, S. V., Skardal, A., & Atala, A. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34326 · Cited by 543
Three-dimensional printing of Hela cells for cervical tumor model in vitro
Zhao, Y., Yao, R., Ouyang, L., Ding, H., Zhang, T., Zhang, K., Cheng, S., & Sun, W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035001 · Cited by 534
Yang, X., Lu, Z., Wu, H., Li, W., Zheng, L., & Zhao, J. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.09.002 · Cited by 533
Albanna, M., Binder, K. W., Murphy, S. V., Kim, J., Qasem, S. A., Zhao, W., Tan, J., El-Amin, I. B., Dice, D. D., Marco, J., et al. (2019) · Scientific Reports · doi:10.1038/s41598-018-38366-w · Cited by 512
Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503
Recent Advances in Bioink Design for 3D Bioprinting of Tissues and Organs
Ji, S., & Guvendiren, M. (2017) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2017.00023 · Cited by 490
Novel Biomaterials Used in Medical 3D Printing Techniques
Tappa, K., & Jammalamadaka, U. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010017 · Cited by 490
Cartilage Tissue Engineering by the 3D Bioprinting of iPS Cells in a Nanocellulose/Alginate Bioink
Nguyen, D., Hägg, D. A., Forsman, A., Ekholm, J., Nimkingratana, P., Brantsing, C., Kalogeropoulos, T., Zaunz, S., Concaro, S., Brittberg, M., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-00690-y · Cited by 484
High-resolution PLA-based composite scaffolds via 3-D printing technology
Serra, T., Planell, J. A., & Navarro, M. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.041 · Cited by 479
Keriquel, V., Oliveira, H., Rémy, M., Ziane, S., Delmond, S., Rousseau, B., Rey, S., Catros, S., Amédée, J., Guillemot, F., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-01914-x · Cited by 447
3D printing of layered brain-like structures using peptide modified gellan gum substrates
Lozano, R., Stevens, L., Thompson, B. C., Gilmore, K. J., Gorkin, R., Stewart, E. M., in het Panhuis, M., Romero-Ortega, M., & Wallace, G. G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.07.022 · Cited by 445
A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
Duan, B., Kapetanovic, E., Hockaday, L. A., & Butcher, J. T. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.005 · Cited by 436
Biological Laser Printing: A Novel Technique for Creating Heterogeneous 3-dimensional Cell Patterns
Barron, J. A., Wu, P., Ladouceur, H. D., & Ringeisen, B. R. (2004) · Biomedical Microdevices · doi:10.1023/b:bmmd.0000031751.67267.9f · Cited by 435
Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts
Cantrell, J. T., Rohde, S., Damiani, D., Gurnani, R., DiSandro, L., Anton, J., Young, A., Jerez, A., Steinbach, D., Kroese, C., et al. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2016-0042 · Cited by 433
Skardal, A., Devarasetty, M., Kang, H.-W., Mead, I., Bishop, C., Shupe, T., Lee, S. J., Jackson, J., Yoo, J., Soker, S., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.030 · Cited by 428
Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation
Wu, Z., Su, X., Xu, Y., Kong, B., Sun, W., & Mi, S. (2016) · Scientific Reports · doi:10.1038/srep24474 · Cited by 418
Extrusion-based additive manufacturing of PEEK for biomedical applications
Vaezi, M., & Yang, S. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097053 · Cited by 406
Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue
Byambaa, B., Annabi, N., Yue, K., Trujillo‐de Santiago, G., Alvarez, M. M., Jia, W., Kazemzadeh‐Narbat, M., Shin, S. R., Tamayol, A., & Khademhosseini, A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700015 · Cited by 394
A review of process planning techniques in layered manufacturing
Kulkarni, P., Marsan, A., & Dutta, D. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010309859 · Cited by 390
Dhariwala, B., Hunt, E., & Boland, T. (2004) · Tissue Engineering · doi:10.1089/1076327042500256 · Cited by 389
Bio-printing of collagen and VEGF-releasing fibrin gel scaffolds for neural stem cell culture
Lee, Y.-B., Polio, S., Lee, W., Dai, G., Menon, L., Carroll, R. S., & Yoo, S.-S. (2010) · Experimental Neurology · doi:10.1016/j.expneurol.2010.02.014 · Cited by 388
Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers
Levato, R., Visser, J., Planell, J. A., Engel, E., Malda, J., & Mateos-Timoneda, M. A. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035020 · Cited by 380
Fratini, M., Bukreeva, I., Campi, G., Brun, F., Tromba, G., Modregger, P., Bucci, D., Battaglia, G., Spanò, R., Mastrogiacomo, M., et al. (2015) · Scientific Reports · doi:10.1038/srep10771 · Cited by 377
Functional 3D Neural Mini‐Tissues from Printed Gel‐Based Bioink and Human Neural Stem Cells
Gu, Q., Tomaskovic‐Crook, E., Lozano, R., Chen, Y., Kapsa, R. M., Zhou, Q., Wallace, G. G., & Crook, J. M. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600095 · Cited by 376
Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives
Torres, J., Cotelo, J., Karl, J., & Gordon, A. P. (2015) · JOM · doi:10.1007/s11837-015-1367-y · Cited by 374
A 3D bioprinted complex structure for engineering the muscle–tendon unit
Merceron, T. K., Burt, M., Seol, Y.-J., Kang, H.-W., Lee, S. J., Yoo, J. J., & Atala, A. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035003 · Cited by 373
Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting
Müller, M., Becher, J., Schnabelrauch, M., & Zenobi-Wong, M. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035006 · Cited by 371
Ornamenting 3D printed scaffolds with cell-laid extracellular matrix for bone tissue regeneration
Pati, F., Song, T.-H., Rijal, G., Jang, J., Kim, S. W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.10.012 · Cited by 361
Zhang, A. P., Qu, X., Soman, P., Hribar, K. C., Lee, J. W., Chen, S., & He, S. (2012) · Advanced Materials · doi:10.1002/adma.201202024 · Cited by 360
Laser Direct-Write Techniques for Printing of Complex Materials
Arnold, C. B., Serra, P., & Piqué, A. (2007) · MRS Bulletin · doi:10.1557/mrs2007.11 · Cited by 360
A Review of Three-Dimensional Printing in Tissue Engineering
Sears, N. A., Seshadri, D. R., Dhavalikar, P. S., & Cosgriff-Hernandez, E. (2016) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2015.0464 · Cited by 360
Application areas of 3D bioprinting
Ozbolat, I. T., Peng, W., & Ozbolat, V. (2016) · Drug Discovery Today · doi:10.1016/j.drudis.2016.04.006 · Cited by 350
On the biodegradability of polyethylene glycol, polypeptoids and poly(2-oxazoline)s
Ulbricht, J., Jordan, R., & Luxenhofer, R. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.02.029 · Cited by 348
Engineering an in vitro air-blood barrier by 3D bioprinting
Horváth, L., Umehara, Y., Jud, C., Blank, F., Petri-Fink, A., & Rothen-Rutishauser, B. (2015) · Scientific Reports · doi:10.1038/srep07974 · Cited by 345
Synthesis and Characterization of Hybrid Hyaluronic Acid-Gelatin Hydrogels
Camci-Unal, G., Cuttica, D., Annabi, N., Demarchi, D., & Khademhosseini, A. (2013) · Biomacromolecules · doi:10.1021/bm3019856 · Cited by 343
Gao, G., Yonezawa, T., Hubbell, K., Dai, G., & Cui, X. (2015) · Biotechnology Journal · doi:10.1002/biot.201400635 · Cited by 340
Xu, F., Celli, J., Rizvi, I., Moon, S., Hasan, T., & Demirci, U. (2011) · Biotechnology Journal · doi:10.1002/biot.201000340 · Cited by 337
Asti, A., & Gioglio, L. (2014) · The International Journal of Artificial Organs · doi:10.5301/ijao.5000307 · Cited by 335
3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration
Rosenzweig, D., Carelli, E., Steffen, T., Jarzem, P., & Haglund, L. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms160715118 · Cited by 326
Biofabrication of multi-material anatomically shaped tissue constructs
Visser, J., Peters, B., Burger, T. J., Boomstra, J., Dhert, W. J. A., Melchels, F. P. W., & Malda, J. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035007 · Cited by 313
Zhao, Y., Li, Y., Mao, S., Sun, W., & Yao, R. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045002 · Cited by 312
3D Bioprinting a Cell-Laden Bone Matrix for Breast Cancer Metastasis Study
Zhou, X., Zhu, W., Nowicki, M., Miao, S., Cui, H., Holmes, B., Glazer, R. I., & Zhang, L. G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10673 · Cited by 307
Selective Laser Sintering of PEEK
Schmidt, M., Pohle, D., & Rechtenwald, T. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.05.097 · Cited by 305
Omar, O. M., MOHAMED, M., SyedH., Masood, ., & Bhowmik (2015) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 302
Towards artificial tissue models: past, present, and future of 3D bioprinting
Arslan-Yildiz, A., Assal, R. E., Chen, P., Guven, S., Inci, F., & Demirci, U. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014103 · Cited by 301
Three-dimensional cell culturing by magnetic levitation
Haisler, W. L., Timm, D. M., Gage, J. A., Tseng, H., Killian, T. C., & Souza, G. R. (2013) · Nature Protocols · doi:10.1038/nprot.2013.125 · Cited by 298
Pfister, A., Landers, R., Laib, A., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.10807 · Cited by 284
Direct 3D cell-printing of human skin with functional transwell system
Kim, B. S., Lee, J.-S., Gao, G., & Cho, D.-W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa71c8 · Cited by 282
Laser-guided direct writing for applications in biotechnology
Odde, D. J., & Renn, M. J. (1999) · Trends in Biotechnology · doi:10.1016/s0167-7799(99)01355-4 · Cited by 278
Lee, J. W., Kang, K. S., Lee, S. H., Kim, J.-Y., Lee, B.-K., & Cho, D.-W. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.09.035 · Cited by 274
O’Connell, C. D., Di Bella, C., Thompson, F., Augustine, C., Beirne, S., Cornock, R., Richards, C. J., Chung, J., Gambhir, S., Yue, Z., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015019 · Cited by 274
3D Bioprinting of Developmentally Inspired Templates for Whole Bone Organ Engineering
Daly, A. C., Cunniffe, G. M., Sathy, B. N., Jeon, O., Alsberg, E., & Kelly, D. J. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600182 · Cited by 272
Baraniak, P. R., & McDevitt, T. C. (2012) · Cell and Tissue Research · doi:10.1007/s00441-011-1215-5 · Cited by 270
Shim, J.-H., Kim, J. Y., Park, M., Park, J., & Cho, D.-W. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034102 · Cited by 268
Dong, L., Wang, S.-J., Zhao, X.-R., Zhu, Y.-F., & Yu, J.-K. (2017) · Scientific Reports · doi:10.1038/s41598-017-13838-7 · Cited by 268
A 3D-printed local drug delivery patch for pancreatic cancer growth suppression
Yi, H.-G., Choi, Y.-J., Kang, K. S., Hong, J. M., Pati, R. G., Park, M. N., Shim, I. K., Lee, C. M., Kim, S. C., & Cho, D.-W. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.06.015 · Cited by 260
Chua, C. K., Leong, K. F., Tan, K. H., Wiria, F. E., & Cheah, C. M. (2004) · Journal of Materials Science: Materials in Medicine · doi:10.1023/b:jmsm.0000046393.81449.a5 · Cited by 259
3D Bioprinting of Highly Thixotropic Alginate/Methylcellulose Hydrogel with Strong Interface Bonding
Li, H., Tan, Y. J., Leong, K. F., & Li, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04216 · Cited by 250
Diamantides, N., Wang, L., Pruiksma, T., Siemiatkoski, J., Dugopolski, C., Shortkroff, S., Kennedy, S., & Bonassar, L. J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa780f · Cited by 250
Jet‐based methods to print living cells
Ringeisen, B. R., Othon, C. M., Barron, J. A., Young, D., & Spargo, B. J. (2006) · Biotechnology Journal · doi:10.1002/biot.200600058 · Cited by 249
Dynamically Crosslinked Gold Nanoparticle – Hyaluronan Hydrogels
Skardal, A., Zhang, J., McCoard, L., Oottamasathien, S., & Prestwich, G. D. (2010) · Advanced Materials · doi:10.1002/adma.201001436 · Cited by 248
Chen, L., Deng, C., Li, J., Yao, Q., Chang, J., Wang, L., & Wu, C. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.04.005 · Cited by 245
Synthesis and Characterization of Types A and B Gelatin Methacryloyl for Bioink Applications
Lee, B., Lum, N., Seow, L., Lim, P., & Tan, L. (2016) · Materials · doi:10.3390/ma9100797 · Cited by 243
Essentials of 3D Biofabrication and Translation
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-18665-5 · Cited by 234
Duarte Campos, D. F., Blaeser, A., Korsten, A., Neuss, S., Jäkel, J., Vogt, M., & Fischer, H. (2015) · Tissue Engineering Part A · doi:10.1089/ten.tea.2014.0231 · Cited by 229
Chrisey, D. B. (2000) · Science · doi:10.1126/science.289.5481.879 · Cited by 227
Development and characterisation of a new bioink for additive tissue manufacturing
Melchels, F. P. W., Dhert, W. J. A., Hutmacher, D. W., & Malda, J. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21280g · Cited by 222
Gonçalves, E. M., Oliveira, F. J., Silva, R. F., Neto, M. A., Fernandes, M. H., Amaral, M., Vallet‐Regí, M., & Vila, M. (2016) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33432 · Cited by 221
Tissue engineering with the aid of inkjet printers
Campbell, P. G., & Weiss, L. E. (2007) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.7.8.1123 · Cited by 221
Biological response of intramedullary bone to poly‐L‐lactic acid
Suganuma, J., & Alexander, H. (1993) · Journal of Applied Biomaterials · doi:10.1002/jab.770040103 · Cited by 213
Zhang, H., Mao, X., Du, Z., Jiang, W., Han, X., Zhao, D., Han, D., & Li, Q. (2016) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2016.1145532 · Cited by 208
Morris, V. B., Nimbalkar, S., Younesi, M., McClellan, P., & Akkus, O. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1643-1 · Cited by 207
Piezoelectric inkjet printing of polymers: Stem cell patterning on polymer substrates
Kim, J. D., Choi, J. S., Kim, B. S., Chan Choi, Y., & Cho, Y. W. (2010) · Polymer · doi:10.1016/j.polymer.2010.03.038 · Cited by 206
Hung, K., Tseng, C., & Hsu, S. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400018 · Cited by 202
3D printed PLA-based scaffolds: A versatile tool in regenerative medicine
Serra, T., Mateos-Timoneda, M. A., Planell, J. A., & Navarro, M. (2013) · Organogenesis · doi:10.4161/org.26048 · Cited by 197
Bertocchi, M., Bosi, P., Luise, D., Motta, V., Salvarani, C., Ribani, A., Bovo, S., Simongiovanni, A., Matsunaga, K., Takimoto, T., et al. (2019) · Scientific Reports · doi:10.1038/s41598-019-55006-z · Cited by 195
From Arteries to Capillaries: Approaches to Engineering Human Vasculature
Fleischer, S., Tavakol, D. N., & Vunjak‐Novakovic, G. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910811 · Cited by 195
3D Printed Polycaprolactone Carbon Nanotube Composite Scaffolds for Cardiac Tissue Engineering
Ho, C. M. B., Mishra, A., Lin, P. T. P., Ng, S. H., Yeong, W. Y., Kim, Y., & Yoon, Y. (2017) · Macromolecular Bioscience · doi:10.1002/mabi.201600250 · Cited by 192
Gurkan, U. A., El Assal, R., Yildiz, S. E., Sung, Y., Trachtenberg, A. J., Kuo, W. P., & Demirci, U. (2014) · Molecular Pharmaceutics · doi:10.1021/mp400573g · Cited by 178
Three-dimensional printing of biological matters
Munaz, A., Vadivelu, R. K., St. John, J., Barton, M., Kamble, H., & Nguyen, N.-T. (2016) · Journal of Science: Advanced Materials and Devices · doi:10.1016/j.jsamd.2016.04.001 · Cited by 178
Development of artificial articular cartilage
Oka, M., Ushio, K., Kumar, P., et al. (2000) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1243/0954411001535246 · Cited by 176
Nanomodified Peek Dental Implants: Bioactive Composites and Surface Modification—A Review
Najeeb, S., Khurshid, Z., Matinlinna, J. P., Siddiqui, F., Nassani, M. Z., & Baroudi, K. (2015) · International Journal of Dentistry · doi:10.1155/2015/381759 · Cited by 175
Janorkar, A. V., Metters, A. T., & Hirt, D. E. (2004) · Macromolecules · doi:10.1021/ma049056u · Cited by 173
Impact of macromolecular crowding on DNA replication
Akabayov, B., Akabayov, S. R., Lee, S.-J., Wagner, G., & Richardson, C. C. (2013) · Nature Communications · doi:10.1038/ncomms2620 · Cited by 168
Williams, D. F., Thayer, P., Martinez, H., Gatenholm, E., & Khademhosseini, A. (2018) · Bioprinting · doi:10.1016/j.bprint.2018.02.003 · Cited by 165
3D Printing metamaterials towards tissue engineering
Dogan, E., Bhusal, A., Çeçen, B., & Miri, A. K. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100752 · Cited by 161
Pranzo, D., Larizza, P., Filippini, D., & Percoco, G. (2018) · Micromachines · doi:10.3390/mi9080374 · Cited by 160
Murphy, C. A., Kolan, K. C. R., Li, W., Semon, J. A., Day, D. E., & Leu, M. C. (2017) · International Journal of Bioprinting · doi:10.18063/ijb.2017.01.005 · Cited by 156
Rapid-prototyped PLGA/β-TCP/hydroxyapatite nanocomposite scaffolds in a rabbit femoral defect model
Kim, J., McBride, S., Tellis, B. C., Alvarez, P., Song, Y. H., Dean, D. D., Sylvia, V. L., Elgendy, H. M., Ong, J. L., & Hollinger, J. O. (2012) · Biofabrication · doi:10.1088/1758-5082/4/2/025003 · Cited by 153
3D printing of high-strength bioscaffolds for the synergistic treatment of bone cancer
Ma, H., Li, T., Huan, Z., Zhang, M., Yang, Z., Wang, J., Chang, J., & Wu, C. (2018) · NPG Asia Materials · doi:10.1038/s41427-018-0015-8 · Cited by 150
Directed Three-Dimensional Patterning of Self-Assembled Peptide Fibrils
Dinca, V. C., Kasotakis, E., Catherine, J., Mourka, A., Ranella, A., Ovsianikov, A., Chichkov, B. N., Farsari, M., Mitraki, A., & Fotakis, C. (2007) · Nano Letters · doi:10.1021/nl072798r · Cited by 148
Shie, M., Chang, W., Wei, L.-J., Huang, Y., Chen, C.-H., Shih, C., Chen, Y., & Shen, Y. (2017) · Materials · doi:10.3390/ma10020136 · Cited by 144
Kim, J., Shim, I. K., Hwang, D. G., Lee, Y. N., Kim, M., Kim, H., Kim, S.-W., Lee, S., Kim, S. C., Cho, D., et al. (2019) · Journal of Materials Chemistry B · doi:10.1039/c8tb02787k · Cited by 144
Fiber Reinforced Cartilage ECM Functionalized Bioinks for Functional Cartilage Tissue Engineering
Rathan, S., Dejob, L., Schipani, R., Haffner, B., Möbius, M. E., & Kelly, D. J. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801501 · Cited by 144
Raza, F., Zafar, H., Zhu, Y., Ren, Y., Ullah, A., Khan, A., He, X., Han, H., Aquib, M., Boakye‐Yiadom, K. O., et al. (2018) · Pharmaceutics · doi:10.3390/pharmaceutics10010016 · Cited by 140
Intelligent rapid prototyping with fused deposition modelling
Masood, S. H. (1996) · Rapid Prototyping Journal · doi:10.1108/13552549610109054 · Cited by 139
Printing cell-laden gelatin constructs by free-form fabrication and enzymatic protein crosslinking
Irvine, S. A., Agrawal, A., Lee, B. H., Chua, H. Y., Low, K. Y., Lau, B. C., Machluf, M., & Venkatraman, S. S. (2015) · Biomedical Microdevices · doi:10.1007/s10544-014-9915-8 · Cited by 136
Lin, H., Kuo, C., Yang, C.-W., Shaw, S., & Wu, Y. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10183 · Cited by 134
Ling, K., Huang, G., Liu, J., Zhang, X., Ma, Y., Lu, T. J., & Xu, F. (2015) · Engineering · doi:10.15302/j-eng-2015062 · Cited by 128
Ng, W. L., Yeong, W. Y., & Naing, M. W. (2017) · Materials · doi:10.3390/ma10020190 · Cited by 127
Trabecular scaffolds created using micro CT guided fused deposition modeling
Tellis, B. C., Szivek, J. A., Bliss, C. L., Margolis, D. S., Vaidyanathan, R. K., & Calvert, P. (2007) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.11.010 · Cited by 125
Ge, Z., Tian, X., Heng, B. C., Fan, V., Yeo, J. F., & Cao, T. (2009) · Biomedical Materials · doi:10.1088/1748-6041/4/2/021001 · Cited by 125
Effects of 3D-Printed Polycaprolactone/β-Tricalcium Phosphate Membranes on Guided Bone Regeneration
Shim, J., Won, J.-Y., Park, J.-H., Bae, J.-H., Ahn, G., Kim, C., Lim, D.-H., Cho, D., Yun, W., Bae, E., et al. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18050899 · Cited by 125
A 3D-Printable Polymer-Metal Soft-Magnetic Functional Composite—Development and Characterization
Khatri, B., Lappe, K., Nötzel, D., Pursche, K., & Hanemann, T. (2018) · Materials · doi:10.3390/ma11020189 · Cited by 123
Vanaei, H. R., Raissi, K., Deligant, M., Shirinbayan, M., Fitoussi, J., Khelladi, S., & Tcharkhtchi, A. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-05057-9 · Cited by 120
Self-citationShuai, C., Mao, Z., Lu, H., et al. (2013) · Biofabrication · doi:10.1088/1758-5082/5/1/015014 · Cited by 116
Layer-by-Layer Tissue Microfabrication Supports Cell Proliferation In Vitro and In Vivo
Catros, S., Guillemot, F., Nandakumar, A., Ziane, S., Moroni, L., Habibović, P., van Blitterswijk, C., Rousseau, B., Chassande, O., Amédée, J., et al. (2011) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2011.0382 · Cited by 113
Highly defined 3D printed chitosan scaffolds featuring improved cell growth
Elviri, L., Foresti, R., Bergonzi, C., Zimetti, F., Marchi, C., Bianchera, A., Bernini, F., Silvestri, M., & Bettini, R. (2017) · Biomedical Materials · doi:10.1088/1748-605x/aa7692 · Cited by 111
Microfabrication of scaffold-free tissue strands for three-dimensional tissue engineering
Akkouch, A., Yu, Y., & Ozbolat, I. T. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/031002 · Cited by 109
A three-dimensional co-culture model of the aortic valve using magnetic levitation
Tseng, H., Balaoing, L. R., Grigoryan, B., Raphael, R. M., Killian, T. C., Souza, G. R., & Grande-Allen, K. J. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.09.003 · Cited by 108
Cheng, Y., & Chen, F. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.07.025 · Cited by 105
Three-dimensional bio-printing
Gu, Q., Hao, J., Lu, Y., Wang, L., Wallace, G. G., & Zhou, Q. (2015) · Science China Life Sciences · doi:10.1007/s11427-015-4850-3 · Cited by 104
Vanaei, H. R., Shirinbayan, M., Deligant, M., Raissi, K., Fitoussi, J., Khelladi, S., & Tcharkhtchi, A. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25419 · Cited by 97
Self-citationBiofabrication of Tissue Scaffolds
Zhu, N., & Che, X. (2013) · InTech eBooks · doi:10.5772/54125 · Cited by 96
Kurtz, S. M. (2019) · Elsevier eBooks · doi:10.1016/c2016-0-02479-8 · Cited by 93
Chahal, D., Ahmadi, A., & Cheung, K. C. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24562 · Cited by 92
Experimental Analysis of High Temperature PEEK Materials on 3D Printing Test
Sun, X., Liangcheng, C., Ma, H., Peng, G., Bai, Z., & Li, C. (2017) · International Conference on Measuring Technology and Mechatronics Automation (ICMTMA) · doi:10.1109/icmtma.2017.0012 · Cited by 92
3D Printing of Microstructured and Stretchable Chitosan Hydrogel for Guided Cell Growth
Wu, Q., Maire, M., Lerouge, S., Therriault, D., & Heuzey, M. (2017) · Advanced Biosystems · doi:10.1002/adbi.201700058 · Cited by 92
Deschamps, A. A., van Apeldoorn, A. A., Hayen, H., de Bruijn, J. D., Kärst, U., Grijpma, D. W., & Feijén, J. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00495-2 · Cited by 89
Novak, C. M., Horst, E. N., Taylor, C. C., Liu, C. Z., & Mehta, G. (2019) · Biotechnology and Bioengineering · doi:10.1002/bit.27119 · Cited by 85
Sakai, S., Kamei, H., Mori, T., Hotta, T., Ohi, H., Nakahata, M., & Taya, M. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.7b01827 · Cited by 84
Shim, J., Won, J.-Y., Sung, S.-J., Lim, D.-H., Yun, W., Jeon, Y., & Huh, J. (2015) · Polymers · doi:10.3390/polym7101500 · Cited by 83
Santo, V. E., Duarte, A. R. C., Gomes, M. E., Mano, J. F., & Reis, R. L. (2010) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2010.05.021 · Cited by 78
Laser-assisted bioprinting to deal with tissue complexity in regenerative medicine
Guillemot, F., Guillotin, B., Fontaine, A., Ali, M., Catros, S., Kériquel, V., Fricain, J., Rémy, M., Bareille, R., & Amédée, J. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.272 · Cited by 75
In vitro degradation and biocompatibility of poly(l-lactic acid)/chitosan fiber composites
Zhang, X., Hua, H., Shen, X., & Yang, Q. (2006) · Polymer · doi:10.1016/j.polymer.2006.12.028 · Cited by 74
A cell-printing approach for obtaining hASC-laden scaffolds by using a collagen/polyphenol bioink
Yeo, M. G., & Kim, G. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6997 · Cited by 74
Bioprinting synthetic self-assembling peptide hydrogels for biomedical applications
Loo, Y., & Hauser, C. A. E. (2015) · Biomedical Materials · doi:10.1088/1748-6041/11/1/014103 · Cited by 72
Tang, Z. G., Callaghan, J. T., & Hunt, J. A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.013 · Cited by 69
Experimental study of PLA thermal behavior during fused filament fabrication
Vanaei, H. R., Shirinbayan, M., Costa, S. F., Duarte, F. M., Covas, J. A., Deligant, M., Khelladi, S., & Tcharkhtchi, A. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49747 · Cited by 69
Self-citationHopp, B., Smausz, T., Szabó, G., et al. (2012) · Optical Engineering · doi:10.1117/1.oe.51.1.014302 · Cited by 68
3D printed tissue engineered model for bone invasion of oral cancer
Almela, T., Al‐Sahaf, S., Brook, I. M., Khoshroo, K., Rasoulianboroujeni, M., Fahimipour, F., Tahriri, M., Dashtimoghadam, E., BOLT, R. J., Tayebi, L., et al. (2018) · Tissue and Cell · doi:10.1016/j.tice.2018.03.009 · Cited by 68
Vanaei, H. R., Shirinbayan, M., Vanaei, S., Fitoussi, J., Khelladi, S., & Tcharkhtchi, A. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2019-0300 · Cited by 67
Self-citationWang, Y., Wu, S., Kuss, M. A., Streubel, P. N., & Duan, B. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00101 · Cited by 64
Moroni, L., Poort, G., van Keulen, F., de Wijn, J. R., & van Blitterswijk, C. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30716 · Cited by 63
Vinson, B. T., Phamduy, T. B., Shipman, J. T., Riggs, B. C., Strong, A. L., Sklare, S. C., Murfee, W. L., Burow, M. E., Bunnell, B. A., Huang, Y. H., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6bad · Cited by 57
Kutikov, A. B., Gurijala, A., & Song, J. (2014) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2014.0213 · Cited by 55
Mechanisms of action, chemical characteristics, and model systems of obesogens
Griffin, M. D., Pereira, S. R., DeBari, M. K., & Abbott, R. D. (2020) · BMC Biomedical Engineering · doi:10.1186/s42490-020-00040-6 · Cited by 52
Visible light-based stereolithography bioprinting of cell-adhesive gelatin hydrogels
Wang, Z., Tian, Z., Jin, X., Holzman, J. F., Ménard, F., & Kim, K. (2017) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/embc.2017.8037144 · Cited by 51
Fast, Precise, Safe Prototypes with FDM
Wales (2018) · Texas ScholarWorks (Texas Digital Library) · doi:10.15781/t21834k30 · Cited by 48
Electrospinning and 3D bioprinting for intervertebral disc tissue engineering
Pieri, A. D., Byerley, A. M., Musumeci, C. R., Salemizadehparizi, F., Vanderhorst, M. A., & Wuertz‐Kozak, K. (2020) · JOR Spine · doi:10.1002/jsp2.1117 · Cited by 48
Self-citation3D printing with silk: considerations and applications
DeBari, M. K., Keyser, M. N., Bai, M. A., & Abbott, R. D. (2018) · Connective Tissue Research · doi:10.1080/03008207.2018.1553959 · Cited by 47
3D bioprinted hyaluronic acid-based cell-laden scaffold for brain microenvironment simulation
Ma, L., Li, Y., Wu, Y., Yu, M., Aazmi, A., Gao, L., Xue, Q., Luo, Y., Zhou, H., Zhang, B., et al. (2020) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00076-6 · Cited by 47
Vanaei, S., Parizi, M. S., Abdolhosseini, S., & Katouzian, I. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.10.139 · Cited by 46
Self-citationKatouzian, I., Jafari, S. M., Maghsoudlou, Y., Karami, L., & Eikani, M. H. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.105859 · Cited by 44
In Situ 3D Label-Free Contactless Bioprinting of Cells through Diamagnetophoresis
Fattah, A. R. A., Meleca, E., Mishriki, S., Lelic, A., Geng, F., Sahu, R. P., Ghosh, S., & Puri, I. K. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00614 · Cited by 43
A comparative in‐process monitoring of temperature profile in fused filament fabrication
Vanaei, H. R., Deligant, M., Shirinbayan, M., Raissi, K., Fitoussi, J., Khelladi, S., & Tcharkhtchi, A. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25555 · Cited by 42
Self-citationPelras, T., Glaß, S., Scherzer, T., Elsner, C., Schulze, A., & Abel, B. (2017) · Polymers · doi:10.3390/polym9120639 · Cited by 41
Enzymatic Degradation of Liposome-Grafted Poly(hydroxyethyl l -glutamine)
Romberg, B., Metselaar, J. M., de Vringer, T., Motonaga, K., den Bosch, J. J. K.-V., Oussoren, C., Storm, G., & Hennink, W. E. (2005) · Bioconjugate Chemistry · doi:10.1021/bc0497719 · Cited by 38
Pan, Q., Gao, C., Wang, Y., Wang, Y., Mao, C., Wang, Q., Economidou, S. N., Douroumis, D., Wen, F., Tan, L. P., et al. (2020) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00086-4 · Cited by 38
Cited by
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
3D bioprinting of cell-laden constructs for regenerative medicine
Li, C., & Cui, W. (2021) · Engineered Regeneration · doi:10.1016/j.engreg.2021.11.005 · Cited by 70
Metal-organic framework (MOF)-based biomaterials in bone tissue engineering
Liu, C., Xu, X., Cui, W., & Zhang, H. (2021) · Engineered Regeneration · doi:10.1016/j.engreg.2021.09.001 · Cited by 59
El Magri, A., El Mabrouk, K., & Vaudreuil, S. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-06172-x · Cited by 55
Metadata
- Authors
- Vanaei, S., Parizi, M. S., Vanaei, S., Salemizadehparizi, F., & Vanaei, H. R.
- Venue
- Engineered Regeneration
- Publisher
- Elsevier BV
- Published
- 2021
- Volume
- 2
- Pages
- 1-18
- ISSN
- 2666-1381 (ISSN-L)
- OpenAlex
- W3112950318
- Cited by
- 308
- References
- 210
- FWCI
- 12.09
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.