The DOI matches its Crossref record; 160 of the 160 references it cites were found in a registry or an index.
Additive manufacturing of tissues and organs
Open accessAbstract
Additive manufacturing techniques offer the potential to fabricate organized tissue constructs to repair or replace damaged or diseased human tissues and organs. Using these techniques, spatial variations of cells along multiple axes with high geometric complexity in combination with different biomaterials can be generated. The level of control offered by these computer-controlled technologies to design and fabricate tissues will accelerate our understanding of the governing factors of tissue formation and function. Moreover, it will provide a valuable tool to study the effect of anatomy on graft performance. In this review, we discuss the rationale for engineering tissues and organs by combining computer-aided design with additive manufacturing technologies that encompass the simultaneous deposition of cells and materials. Current strategies are presented, particularly with respect to limitations due to the lack of suitable polymers, and requirements to move the current concepts to practical application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Xia, Y., & Whitesides, G. M. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.153 · Cited by 4,611
Double‐Network Hydrogels with Extremely High Mechanical Strength
Gong, J. P., Katsuyama, Y., Kurokawa, T., & Osada, Y. (2003) · Advanced Materials · doi:10.1002/adma.200304907 · Cited by 4,542
Biodegradable polymers as biomaterials
Nair, L. S., & Laurencin, C. T. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.017 · Cited by 4,416
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033 · cited 4×
“Hence, it is of utmost importance to study those in vitro and/or in vivo mimetics in great detail [4].”
BackgroundMethodInfluentialSelf-citationPorous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Self-citationCell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Tissue Engineering--Current Challenges and Expanding Opportunities
Griffith, L. G., & Naughton, G. (2002) · Science · doi:10.1126/science.1069210 · Cited by 2,343
Benya, P. D., & Shaffer, J. D. (1982) · Cell · doi:10.1016/0092-8674(82)90027-7 · Cited by 2,284
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Self-citationPolymeric system for dual growth factor delivery
Richardson, T. P., Peters, M. C., Ennett, A. B., & Mooney, D. J. (2001) · Nature Biotechnology · doi:10.1038/nbt1101-1029 · Cited by 1,752
Photodegradable Hydrogels for Dynamic Tuning of Physical and Chemical Properties
Kloxin, A. M., Kasko, A. M., Salinas, C. N., & Anseth, K. S. (2009) · Science · doi:10.1126/science.1169494 · Cited by 1,748
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Lutolf, M. P., Lauer-Fields, J. L., Schmoekel, H. G., Metters, A. T., Weber, F. E., Fields, G. B., & Hubbell, J. A. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0737381100 · Cited by 1,508
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Self-citationDesigning materials to direct stem-cell fate
Lutolf, M. P., Gilbert, P. M., & Blau, H. M. (2009) · Nature · doi:10.1038/nature08602 · Cited by 1,393
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
Engineering vascularized skeletal muscle tissue
Levenberg, S., Rouwkema, J., Macdonald, M., Garfein, E. S., Kohane, D. S., Darland, D. C., Marini, R., van Blitterswijk, C. A., Mulligan, R. C., D'Amore, P. A., et al. (2005) · Nature Biotechnology · doi:10.1038/nbt1109 · Cited by 1,293
Cell Encapsulation in Biodegradable Hydrogels for Tissue Engineering Applications
Nicodemus, G. D., & Bryant, S. J. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2007.0332 · Cited by 1,239
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
Vascularization in tissue engineering
Rouwkema, J., Rivron, N. C., & van Blitterswijk, C. A. (2008) · Trends in Biotechnology · doi:10.1016/j.tibtech.2008.04.009 · Cited by 1,211
Three-Dimensional Cell Culture Matrices: State of the Art
Lee, J., Cuddihy, M. J., & Kotov, N. A. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/teb.2007.0150 · Cited by 1,047
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,035
Burdick, J. A., & Anseth, K. S. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00176-x · Cited by 1,008
Calvert, P. (2009) · Advanced Materials · doi:10.1002/adma.200800534 · Cited by 1,004
Sawhney, A. S., Pathak, C. P., & Hubbell, J. A. (1993) · Macromolecules · doi:10.1021/ma00056a005 · Cited by 974
Polymeric materials for bone and cartilage repair
Puppi, D., Chiellini, F., Piras, A. M., & Chiellini, E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.006 · Cited by 913
Bioceramics: Past, present and for the future
Best, S. M., Porter, A. E., Thian, E. S., & Huang, J. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2007.12.001 · Cited by 851
Bryant, S. J., & Anseth, K. S. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1217 · Cited by 845
Direct writing by way of melt electrospinning
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2011) · Advanced Materials · doi:10.1002/adma.201103482 · Cited by 800
Self-citationA review of rapid prototyping techniques for tissue engineering purposes
Peltola, S. M., Melchels, F. P. W., Grijpma, D. W., & Kellomäki, M. (2008) · Annals of Medicine · doi:10.1080/07853890701881788 · Cited by 751
Self-citationThree‐dimensional printing of porous ceramic scaffolds for bone tissue engineering
Seitz, H., Rieder, W., Irsen, S., Leukers, B., & Tille, C. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30291 · Cited by 742
Hepatocyte function and extracellular matrix geometry: long‐term culture in a sandwich configuration
Dunn, J. C. Y., Yarmush, M. L., Koebe, H. G., & Tompkins, R. G. (1989) · The FASEB Journal · doi:10.1096/fasebj.3.2.2914628 · Cited by 739
Inkjet printing for high-throughput cell patterning
Roth, E. A., Xu, T., Das, M., Gregory, C., Hickman, J. J., & Boland, T. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.052 · Cited by 714
Scaffold development using 3D printing with a starch-based polymer
Lam, C. X. F., Mo, X. M., Teoh, S. H., & Hutmacher, D. W. (2002) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(02)00012-7 · Cited by 614
Self-citationSelf-Assembly of Large and Small Molecules into Hierarchically Ordered Sacs and Membranes
Capito, R. M., Azevedo, H. S., Velichko, Y. S., Mata, A., & Stupp, S. I. (2008) · Science · doi:10.1126/science.1154586 · Cited by 601
Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth
Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C., & Mikos, A. G. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10485 · Cited by 571
Genetic and Cellular Toxicology of Dental Resin Monomers
Schweikl, H., Spagnuolo, G., & Schmalz, G. (2006) · Journal of Dental Research · doi:10.1177/154405910608501001 · Cited by 571
Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures
Chu, T.-M. G., Orton, D. G., Hollister, S. J., Feinberg, S. E., & Halloran, J. W. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00243-5 · Cited by 554
Zisch, A. H., Lutolf, M. P., Ehrbar, M., Raeber, G. P., Rizzi, S. C., Davies, N., Schmökel, H., Bezuidenhout, D., Djonov, V., Zilla, P., et al. (2003) · The FASEB Journal · doi:10.1096/fj.02-1041fje · Cited by 534
Cell and organ printing 1: Protein and cell printers
Wilson, W. C., & Boland, T. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10057 · Cited by 531
Mathematically defined tissue engineering scaffold architectures prepared by stereolithography
Melchels, F. P. W., Bertoldi, K., Gabbrielli, R., Velders, A. H., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.068 · Cited by 530
Self-citationDelivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing
Saunders, R. E., Gough, J. E., & Derby, B. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.032 · Cited by 495
High-throughput laser printing of cells and biomaterials for tissue engineering
Guillemot, F., Souquet, A., Catros, S., Guillotin, B., Lopez, J., Faucon, M., Pippenger, B., Bareille, R., Rémy, M., Bellance, S., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.029 · Cited by 475
Chan, V., Zorlutuna, P., Jeong, J. H., Kong, H., & Bashir, R. (2010) · Lab on a Chip · doi:10.1039/c004285d · Cited by 468
Fedorovich, N. E., Alblas, J., de Wijn, J. R., Hennink, W. E., Verbout, A. J., & Dhert, W. J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0175 · Cited by 467 · cited 1×
“Hydrogels are thus gaining increasing interest for the manufacturing of tissues [83].”
BackgroundFabrication of 3D hepatic tissues by additive photopatterning of cellular hydrogels
Tsang, V. L., Chen, A. A., Cho, L. M., Jadin, K. D., Sah, R. L., DeLong, S., West, J. L., & Bhatia, S. N. (2007) · The FASEB Journal · doi:10.1096/fj.06-7117com · Cited by 462
Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461
A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
Self-citationBiological Laser Printing: A Novel Technique for Creating Heterogeneous 3-dimensional Cell Patterns
Barron, J. A., Wu, P., Ladouceur, H. D., & Ringeisen, B. R. (2004) · Biomedical Microdevices · doi:10.1023/b:bmmd.0000031751.67267.9f · Cited by 435
The challenge of establishing preclinical models for segmental bone defect research
Reichert, J. C., Saifzadeh, S., Wullschleger, M. E., Epari, D. R., Schütz, M. A., Duda, G. N., Schell, H., van Griensven, M., Redl, H., & Hutmacher, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.050 · Cited by 433
Self-citationPhotocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step Bioprinting
Skardal, A., Zhang, J., McCoard, L., Xu, X., Oottamasathien, S., & Prestwich, G. D. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0798 · Cited by 424
Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing
GIORDANO, R. A., Wu, B. M., Borland, S. W., Cima, L. G., Sachs, E. M., & Cima, M. J. (1997) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856297x00588 · Cited by 413
Photolithographic patterning of polyethylene glycol hydrogels
Hahn, M. S., Taite, L. J., Moon, J. J., Rowland, M. C., Ruffino, K. A., & West, J. L. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.11.045 · Cited by 411
Mechanical Properties and Structure of Polymer−Clay Nanocomposite Gels with High Clay Content
Haraguchi, K., & Li, H. (2006) · Macromolecules · doi:10.1021/ma052468y · Cited by 411
Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 410
Bioprinting of hybrid tissue constructs with tailorable mechanical properties
Schuurman, W., Khristov, V, Pot, M. W., van Weeren, P. R., Dhert, W. J. A., & Malda, J. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/021001 · Cited by 409
Self-citationThree‐Dimensional Biochemical and Biomechanical Patterning of Hydrogels for Guiding Cell Behavior
Hahn, M. S., Miller, J. S., & West, J. L. (2006) · Advanced Materials · doi:10.1002/adma.200600647 · Cited by 407
Dhariwala, B., Hunt, E., & Boland, T. (2004) · Tissue Engineering · doi:10.1089/1076327042500256 · Cited by 389
Direct writing of three-dimensional webs
Gratson, G. M., Xu, M., & Lewis, J. A. (2004) · Nature · doi:10.1038/428386a · Cited by 389
Automated three-dimensional finite element modelling of bone: a new method
Keyak, J. H., Meagher, J. M., Skinner, H. B., & Mote, C. D. (1990) · Journal of Biomedical Engineering · doi:10.1016/0141-5425(90)90022-f · Cited by 383
Cell and organ printing 2: Fusion of cell aggregates in three‐dimensional gels
Boland, T., Mironov, V., Gutowska, A., Roth, E. A., & Markwald, R. R. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10059 · Cited by 382
Lu, Y., Mapili, G., Suhali, G., Chen, S., & Roy, K. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30601 · Cited by 380
Three-Dimensional BioAssembly Tool for Generating Viable Tissue-Engineered Constructs
Smith, C. M., Stone, A. L., Parkhill, R. L., Stewart, R. L., Simpkins, M. W., Kachurin, A. M., Warren, W. L., & Williams, S. K. (2004) · Tissue Engineering · doi:10.1089/1076327042500274 · Cited by 373
Sekine, H., Shimizu, T., Hobo, K., Sekiya, S., Yang, J., Yamato, M., Kurosawa, H., Kobayashi, E., & Okano, T. (2008) · Circulation · doi:10.1161/circulationaha.107.757286 · Cited by 373
Vascularized organoid engineered by modular assembly enables blood perfusion
McGuigan, A. P., & Sefton, M. V. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0602740103 · Cited by 372
Arcaute, K., Mann, B. K., & Wicker, R. B. (2006) · Annals of Biomedical Engineering · doi:10.1007/s10439-006-9156-y · Cited by 364
Direct Freeform Fabrication of Seeded Hydrogels in Arbitrary Geometries
Cohen, D. L., Malone, E., Lipson, H., & Bonassar, L. J. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1325 · Cited by 360
Micro-Computed Tomography—Current Status and Developments
Ritman, E. L. (2004) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.6.040803.140130 · Cited by 360
Ehrbar, M., Djonov, V. G., Schnell, C., Tschanz, S. A., Martiny-Baron, G., Schenk, U., Wood, J., Burri, P. H., Hubbell, J. A., & Zisch, A. H. (2004) · Circulation Research · doi:10.1161/01.res.0000126411.29641.08 · Cited by 357
Generation of Three-Dimensional Hepatocyte/Gelatin Structures with Rapid Prototyping System
Wang, X., Yan, Y., Pan, Y., Xiong, Z., Liu, H., Cheng, J., Liu, F., Lin, F., Wu, R., Zhang, R., et al. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.83 · Cited by 353
Multi‐nozzle deposition for construction of 3D biopolymer tissue scaffolds
Khalil, S., Nam, J., & Sun, W. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573347 · Cited by 351
Controlling Rigidity and Degradation of Alginate Hydrogels via Molecular Weight Distribution
Kong, H. J., Kaigler, D., Kim, K., & Mooney, D. J. (2004) · Biomacromolecules · doi:10.1021/bm049879r · Cited by 350
Bioactive composite materials for tissue engineering scaffolds
Boccaccini, A. R., & Blaker, J. J. (2005) · Expert Review of Medical Devices · doi:10.1586/17434440.2.3.303 · Cited by 347
Organ printing: from bioprinter to organ biofabrication line
Mironov, V., Kasyanov, V., & Markwald, R. R. (2011) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2011.02.006 · Cited by 343
Galler, K. M., Aulisa, L., Regan, K. R., D’Souza, R. N., & Hartgerink, J. D. (2010) · Journal of the American Chemical Society · doi:10.1021/ja910481t · Cited by 339
Micromolding of shape-controlled, harvestable cell-laden hydrogels
Yeh, J., Ling, Y., Karp, J. M., Gantz, J., Chandawarkar, A., Eng, G., Blumling III, J., Langer, R., & Khademhosseini, A. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.06.005 · Cited by 339
Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures
Derby, B. (2008) · Journal of Materials Chemistry · doi:10.1039/b807560c · Cited by 339
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Khalil, S., & Sun, W. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3128729 · Cited by 337
Biomaterials offer cancer research the third dimension
Hutmacher, D. W. (2010) · Nature Materials · doi:10.1038/nmat2619 · Cited by 323
Self-citationFab@Home: the personal desktop fabricator kit
Malone, E., & Lipson, H. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776197 · Cited by 322
Tissue Engineering of Articular Cartilage with Biomimetic Zones
Klein, T. J., Malda, J., Sah, R. L., & Hutmacher, D. W. (2009) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2008.0563 · Cited by 315
Self-citationPreparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography
Elomaa, L., Teixeira, S., Hakala, R., Korhonen, H., Grijpma, D. W., & Seppälä, J. V. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.039 · Cited by 311
Layer-by-layer deposition of hyaluronic acid and poly-l-lysine for patterned cell co-cultures
Khademhosseini, A., Suh, K. Y., Yang, J. M., Eng, G., Yeh, J., Levenberg, S., & Langer, R. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.033 · Cited by 309
Direct‐Write Assembly of Microperiodic Silk Fibroin Scaffolds for Tissue Engineering Applications
Ghosh, S., Parker, S. T., Wang, X., Kaplan, D. L., & Lewis, J. A. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200800040 · Cited by 287
Keriquel, V., Guillemot, F., Arnault, I., Guillotin, B., Miraux, S., Amédée, J., Fricain, J.-C., & Catros, S. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014101 · Cited by 280
Biomimetic materials in tissue engineering
Patterson, J., Martino, M. M., & Hubbell, J. A. (2010) · Materials Today · doi:10.1016/s1369-7021(10)70013-4 · Cited by 280
Hyaluronic Acid and Dextran-Based Semi-IPN Hydrogels as Biomaterials for Bioprinting
Pescosolido, L., Schuurman, W., Malda, J., Matricardi, P., Alhaique, F., Coviello, T., van Weeren, P. R., Dhert, W. J. A., Hennink, W. E., & Vermonden, T. (2011) · Biomacromolecules · doi:10.1021/bm200178w · Cited by 280
Self-citationLaser-guided direct writing for applications in biotechnology
Odde, D. J., & Renn, M. J. (1999) · Trends in Biotechnology · doi:10.1016/s0167-7799(99)01355-4 · Cited by 278
Elloumi‐Hannachi, I., Yamato, M., & Okano, T. (2010) · Journal of Internal Medicine · doi:10.1111/j.1365-2796.2009.02185.x · Cited by 271
Organ Printing: Promises and Challenges
Mironov, V., Kasyanov, V., Drake, C., & Markwald, R. R. (2008) · Regenerative Medicine · doi:10.2217/17460751.3.1.93 · Cited by 258
Rapid cell sheet detachment from Poly(N-isopropylacrylamide)-grafted porous cell culture membranes
Kwon, O. H., Kikuchi, A., Yamato, M., Sakurai, Y., & Okano, T. (2000) · Journal of Biomedical Materials Research · Cited by 250
Cruise, G. M., Hegre, O. D., Scharp, D. S., & Hubbell, J. A. (1998) · Biotechnology and Bioengineering · Cited by 245
Tissue Engineering: The End of the Beginning
Lysaght, M. J., & Hazlehurst, A. L. (2004) · Tissue Engineering · doi:10.1089/107632704322791943 · Cited by 238
The effect of PEGT/PBT scaffold architecture on the composition of tissue engineered cartilage
Malda, J., Woodfield, T. B. F., van der Vloodt, F., Wilson, C., Martens, D. E., Tramper, J., van Blitterswijk, C. A., & Riesle, J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.046 · Cited by 234
Self-citationHigh throughput methods applied in biomaterial development and discovery
Hook, A. L., Anderson, D. G., Langer, R., Williams, P., Davies, M. C., & Alexander, M. R. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.037 · Cited by 231
MAGNETIC RESONANCE IMAGING AFTER TOTAL HIP ARTHROPLASTY: EVALUATION OF PERIPROSTHETIC SOFT TISSUE
POTTER, H. G., NESTOR, B. J., SOFKA, C. M., HO, S. T., PETERS, L. E., & SALVATI, E. A. (2004) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200409000-00013 · Cited by 227
Tissue engineering of stratified articular cartilage from chondrocyte subpopulations
Klein, T. J., Schumacher, B. L., Schmidt, T. A., Li, K. W., Voegtline, M. S., Masuda, K., Thonar, E. J.-M. A., & Sah, R. L. (2003) · Osteoarthritis and Cartilage · doi:10.1016/s1063-4584(03)00090-6 · Cited by 226
Self-citationNuttelman, C. R., Rice, M. A., Rydholm, A. E., Salinas, C. N., Shah, D. N., & Anseth, K. S. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.09.006 · Cited by 223
Tissue engineering with the aid of inkjet printers
Campbell, P. G., & Weiss, L. E. (2007) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.7.8.1123 · Cited by 221
Drop-on-demand printing of cells and materials for designer tissue constructs
Boland, T., Tao, X., Damon, B. J., Manley, B., Kesari, P., Jalota, S., & Bhaduri, S. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.047 · Cited by 220
Advancing animal models of neoplasia through in vivo bioluminescence imaging
Edinger, M., Cao, Y.-A., Hornig, Y. S., Jenkins, D. E., Verneris, M. R., Bachmann, M. H., Negrin, R. S., & Contag, C. H. (2002) · European Journal of Cancer · doi:10.1016/s0959-8049(02)00410-0 · Cited by 210
Application of Stereolithography for Scaffold Fabrication for Tissue Engineered Heart Valves
Sodian, R., Loebe, M., Hein, A., Martin, D. P., Hoerstrup, S. P., Potapov, E. V., Hausmann, H., Lueth, T., & Hetzer, R. (2002) · ASAIO Journal · doi:10.1097/00002480-200201000-00004 · Cited by 206
Assessment of hepatocellular function within PEG hydrogels
Underhill, G. H., Chen, A. A., Albrecht, D. R., & Bhatia, S. N. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.08.043 · Cited by 206
Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds
Arcaute, K., Mann, B., & Wicker, R. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.017 · Cited by 205
Direct Cell Writing of 3D Microorgan for In Vitro Pharmacokinetic Model
Chang, R., Nam, J., & Sun, W. (2008) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2007.0392 · Cited by 203
Laser‐layered microfabrication of spatially patterned functionalized tissue‐engineering scaffolds
Mapili, G., Lu, Y., Chen, S., & Roy, K. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30325 · Cited by 202
Ekaputra, A. K., Prestwich, G. D., Cool, S. M., & Hutmacher, D. W. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.07.022 · Cited by 202
Self-citationEvaluation of Photocrosslinked Lutrol Hydrogel for Tissue Printing Applications
Fedorovich, N. E., Swennen, I., Girones, J., Moroni, L., van Blitterswijk, C. A., Schacht, E., Alblas, J., & Dhert, W. J. A. (2009) · Biomacromolecules · doi:10.1021/bm801463q · Cited by 202
Ovsianikov, A., Schlie, S., Ngezahayo, A., Haverich, A., & Chichkov, B. N. (2007) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.57 · Cited by 194
Rizzi, S. C., Ehrbar, M., Halstenberg, S., Raeber, G. P., Schmoekel, H. G., Hagenmüller, H., Müller, R., Weber, F. E., & Hubbell, J. A. (2006) · Biomacromolecules · doi:10.1021/bm060504a · Cited by 193
Lysaght, M. J., Jaklenec, A., & Deweerd, E. (2008) · Tissue Engineering Part A · doi:10.1089/tea.2007.0267 · Cited by 183
Cellular control of tissue architectures using a three-dimensional tissue fabrication technique
Tsuda, Y., Shimizu, T., Yamato, M., Kikuchi, A., Sasagawa, T., Sekiya, S., Kobayashi, J., Chen, G., & Okano, T. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.08.002 · Cited by 180
Direct Fabrication of a Hybrid Cell/Hydrogel Construct by a Double-nozzle Assembling Technology
Li, S., Xiong, Z., Wang, X., Yan, Y., Liu, H., & Zhang, R. (2009) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911509104094 · Cited by 180
Lokmic, Z., Stillaert, F., Morrison, W. A., Thompson, E. W., & Mitchell, G. M. (2007) · The FASEB Journal · doi:10.1096/fj.06-6614com · Cited by 177
A Printable Photopolymerizable Thermosensitive p(HPMAm‐lactate)‐PEG Hydrogel for Tissue Engineering
Censi, R., Schuurman, W., Malda, J., di Dato, G., Burgisser, P. E., Dhert, W. J. A., van Nostrum, C. F., di Martino, P., Vermonden, T., & Hennink, W. E. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002428 · Cited by 171
Self-citationAdditive manufacturing for in situ repair of osteochondral defects
Cohen, D. L., Lipton, J. I., Bonassar, L. J., & Lipson, H. (2010) · Biofabrication · doi:10.1088/1758-5082/2/3/035004 · Cited by 169
Bioreactor-based roadmap for the translation of tissue engineering strategies into clinical products
Martín, I., Smith, T., & Wendt, D. J. (2009) · Trends in biotechnology · doi:10.1016/j.tibtech.2009.06.002 · Cited by 160
Rapid Prototyping Three-Dimensional Cell/Gelatin/Fibrinogen Constructs for Medical Regeneration
Xu, W., Wang, X., Yan, Y., Zheng, W. J., Xiong, Z., Lin, F., Wu, R., & Zhang, R. (2007) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911507079451 · Cited by 155
Direct Construction of a Three-dimensional Structure with Cells and Hydrogel
Yan, Y., Wang, X., Xiong, Z., Liu, H., Liu, F., Lin, F., Wu, R., Zhang, R., & Lu, Q. (2005) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911505053658 · Cited by 155
Strategies for Zonal Cartilage Repair using Hydrogels
Klein, T. J., Rizzi, S. C., Reichert, J. C., Georgi, N., Malda, J., Schuurman, W., Crawford, R., & Hutmacher, D. W. (2009) · Macromolecular Bioscience · doi:10.1002/mabi.200900176 · Cited by 154
Self-citationSome hydrogels having novel molecular structures
Johnson, J. A., Turro, N. J., Koberstein, J. T., & Mark, J. E. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.002 · Cited by 152
Cao, Y., Mitchell, G. M., Messina, A., Price, L. A., Thompson, E. W., Penington, A., Morrison, W., O’Connor, A. J., Stevens, G. W., & Cooper-White, J. J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.015 · Cited by 148
Design and analysis of digital materials for physical 3D voxel printing
Hiller, J. D., & Lipson, H. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910943441 · Cited by 146
High-Throughput Production of Single-Cell Microparticles Using an Inkjet Printing Technology
Xu, T., Kincaid, H. A., Atala, A., & Yoo, J. J. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2903064 · Cited by 140
Tissue assembly and organization: Developmental mechanisms in microfabricated tissues
Rivron, N. C., Rouwkema, J., Truckenmüller, R. K., Karperien, M., de Boer, J., & van Blitterswijk, C. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.037 · Cited by 136
Антонов, Е. Н., Bagratashvili, V. N., Whitaker, M. J., Barry, J. J. A., Shakesheff, K. M., Коновалов, А. Н., Popov, V. K., & Howdle, S. M. (2004) · Advanced Materials · doi:10.1002/adma.200400838 · Cited by 136
Matsuda, T., & Mizutani, M. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10295 · Cited by 135
A photolithographic method to create cellular micropatterns
Karp, J. M., Yeo, Y., Geng, W., Cannizarro, C., Yan, K., Kohane, D. S., Vunjak-Novakovic, G., Langer, R. S., & Radisic, M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.04.028 · Cited by 134
Cells and Biomaterials in Cartilage Tissue Engineering
Stoddart, M. J., Grad, S., Eglin, D., & Alini, M. (2008) · Regenerative Medicine · doi:10.2217/17460751.4.1.81 · Cited by 134
Choong, C. S. N., Hutmacher, D. W., & Triffitt, J. T. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.2521 · Cited by 126
Self-citationRekonstruktion der Kalvaria durch ein präfabriziertes bioaktives Implantat
Probst, F., Hutmacher, D. W., Müller, D. F., Hg, M., & Schantz, J.-T. (2010) · Handchirurgie · Mikrochirurgie · Plastische Chirurgie · doi:10.1055/s-0030-1248310 · Cited by 123
Self-citationMicro‐Masonry: Construction of 3D Structures by Microscale Self‐Assembly
Fernandez, J. G., & Khademhosseini, A. (2010) · Advanced Materials · doi:10.1002/adma.200903893 · Cited by 109
A phase diagram for microfabrication of geometrically controlled hydrogel scaffolds
Tirella, A., Orsini, A. A., Vozzi, G., & Ahluwalia, A. D. (2009) · Biofabrication · doi:10.1088/1758-5082/1/4/045002 · Cited by 104
Why tissue engineering needs process engineering
Archer, R., & Williams, D. J. (2005) · Nature Biotechnology · doi:10.1038/nbt1105-1353 · Cited by 101
Arakaki, K., Kitamura, N., FUJIKI, H., Kurokawa, T., Iwamoto, M., Ueno, M., Kanaya, F., Osada, Y., Gong, J. P., & Yasuda, K. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32613 · Cited by 100
He, X., & Jabbari, E. (2007) · Biomacromolecules · doi:10.1021/bm060671a · Cited by 99
Microrobotics and MEMS‐Based Fabrication Techniques for Scaffold‐Based Tissue Engineering
Zhang, H., Hutmacher, D. W., Chollet, F. A., POO, A. N., & Burdet, E. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200400202 · Cited by 95
Self-citationScaffold engineering: a bridge to where?
Hollister, S. J. (2009) · Biofabrication · doi:10.1088/1758-5082/1/1/012001 · Cited by 90
In vivo engineering of a human vasculature for bone tissue engineering applications
Steffens, L., Wenger, A., Stark, G. B., & Finkenzeller, G. (2008) · Journal of Cellular and Molecular Medicine · doi:10.1111/j.1582-4934.2008.00418.x · Cited by 79
Gradient Hydrogel Construct Based on an Improved Cell Assembling System
Li, S., Yan, Y., Xiong, Z., Zhang, C. W. R., & Wang, X. (2009) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911509103357 · Cited by 79
TruFit CB®bone plug: chondral repair, scaffold design, surgical technique and early experiences
Melton, J. T. K., Wilson, A. J., Chapman-Sheath, P., & Cossey, A. J. (2010) · Expert Review of Medical Devices · doi:10.1586/erd.10.15 · Cited by 78
Möller, L., Krause, A., Dahlmann, J., Gruh, I., Kirschning, A., & Dräger, G. (2011) · The International Journal of Artificial Organs · doi:10.5301/ijao.2011.6397 · Cited by 75
CAD/CAM-assisted breast reconstruction
Melchels, F. P. W., Wiggenhauser, P. S., Warne, D. J., Barry, M., Ong, F. R., Chong, W. S., Hutmacher, D. W., & Schantz, J. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034114 · Cited by 69
Self-citationSynthesis and Mechanical Properties of a Nanocomposite Gel Consisting of a Tetra-PEG/Clay Network
Fukasawa, M., Sakai, T., Chung, U., & Haraguchi, K. (2010) · Macromolecules · doi:10.1021/ma100419c · Cited by 68
McAllister, T. N., Dusserre, N., Maruszewski, M., & L’Heureux, N. (2008) · Regenerative Medicine · doi:10.2217/17460751.3.6.925 · Cited by 65
In vitro platforms for tissue engineering: implications for basic research and clinical translation
Rouwkema, J., Gibbs, S., Lütolf, M. P., Martín, I., Vunjak‐Novakovic, G., & Malda, J. (2011) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.414 · Cited by 62
Self-citationTissue engineering firms go under
Bouchie, A. J. (2002) · Nature Biotechnology · doi:10.1038/nbt1202-1178 · Cited by 62
Design and Nature : Comparing Design in Nature with Science and Engineering
Carpi, A., & Brebbia, C. A. (2002) · Cited by 60
Image‐guided tissue engineering
Ballyns, J. J., & Bonassar, L. J. (2009) · Journal of Cellular and Molecular Medicine · doi:10.1111/j.1582-4934.2009.00836.x · Cited by 47
Tirella, A., Vozzi, F., Vozzi, G., & Ahluwalia, A. D. (2010) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2010.0195 · Cited by 41
In vitro human tissue models — moving towards personalized regenerative medicine
Schenke‐Layland, K., & Nerem, R. M. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2011.05.001 · Cited by 34
Cell therapies: realizing the potential of this new dimension to medical therapeutics
Singh, P., & Williams, D. (2008) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.108 · Cited by 28
Wagner, W. R., & Griffith, B. P. (2010) · Science · doi:10.1126/science.1194087 · Cited by 27
Microassembly Fabrication of Tissue Engineering Scaffolds With Customized Design
Zhang, H., Burdet, E., POO, A. N., & Hutmacher, D. W. (2008) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2008.917011 · Cited by 24
Self-citationInvention and Business Performance in the Tissue-Engineering Industry
Pangarkar, N., & Hutmacher, D. W. (2003) · Tissue Engineering · doi:10.1089/10763270360728224 · Cited by 20
Self-citationFabrication of 3D Cell Supporting Structures With Multi-Materials Using the Bio-Printer
Nishiyama, Y., Nakamura, M., Henmi, C., Yamaguchi, K., Mochizuki, S., Nakagawa, H., & Takiura, K. (2007) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2007-31064 · Cited by 15
Photonic and Biomedical Applications of the Two-Photon Polymerization Technique
Ovsianikov, A., Farsari, M., & Chichkov, B. N. (2011) · Springer eBooks · doi:10.1007/978-0-387-92904-0_11 · Cited by 5
Rapid Prototyping of Hydrogels to Guide Tissue Formation
Miller, J. S., & West, J. L. (2007) · Springer eBooks · doi:10.1007/978-0-387-47683-4_4 · Cited by 2
Cited by
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Self-citationHinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Ding, D., Pan, Z., Cuiuri, D., & Li, H. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7077-3 · Cited by 1,648
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Metadata
- Authors
- Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W.
- Venue
- Progress in Polymer Science
- Publisher
- Elsevier BV
- Published
- 2012-08
- Volume
- 37
- Issue
- 8
- Pages
- 1079-1104
- ISSN
- 0079-6700 (ISSN-L)
- OpenAlex
- W1517550653
- Cited by
- 1,213
- References
- 160
- FWCI
- 25.16
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.