The DOI matches its Crossref record; 158 of the 158 references it cites were found in a registry or an index.
Designing Biomaterials for 3D Printing
Open accessAbstract
Three-dimensional (3D) printing is becoming an increasingly common technique to fabricate scaffolds and devices for tissue engineering applications. This is due to the potential of 3D printing to provide patient-specific designs, high structural complexity, rapid on-demand fabrication at a low-cost. One of the major bottlenecks that limits the widespread acceptance of 3D printing in biomanufacturing is the lack of diversity in "biomaterial inks". Printability of a biomaterial is determined by the printing technique. Although a wide range of biomaterial inks including polymers, ceramics, hydrogels and composites have been developed, the field is still struggling with processing of these materials into self-supporting devices with tunable mechanics, degradation, and bioactivity. This review aims to highlight the past and recent advances in biomaterial ink development and design considerations moving forward. A brief overview of 3D printing technologies focusing on ink design parameters is also included.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Designing Cell-Compatible Hydrogels for Biomedical Applications
Seliktar, D. (2012) · Science · doi:10.1126/science.1214804 · Cited by 1,923
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
N. Turner, B., Strong, R., & A. Gold, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,450
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
Dawood, A., Marti, B. M., Sauret-Jackson, V., & Darwood, A. (2015) · British Dental Journal · doi:10.1038/sj.bdj.2015.914 · Cited by 1,133
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Zocca, A., Colombo, P., Gomes, C. M., & Günster, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13700 · Cited by 1,115
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
Poly-є-caprolactone based formulations for drug delivery and tissue engineering: A review
Dash, T. K., & Konkimalla, V. B. (2012) · Journal of Controlled Release · doi:10.1016/j.jconrel.2011.09.064 · Cited by 1,016
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Hydrogels in a historical perspective: From simple networks to smart materials
Buwalda, S. J., Boere, K. W. M., Dijkstra, P. J., Feijen, J., Vermonden, T., & Hennink, W. E. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.03.052 · Cited by 994
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
Shear-thinning hydrogels for biomedical applications
Guvendiren, M., Lu, H. D., & Burdick, J. A. (2012) · Soft Matter · doi:10.1039/c1sm06513k · Cited by 911
Self-citationAdditive Manufacturing of Ceramic‐Based Materials
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 878
Freeform fabrication of ceramics via stereolithography
Griffith, M. L., & Halloran, J. W. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb09022.x · Cited by 815
Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Adib Kadri, N., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 755
A review of rapid prototyping techniques for tissue engineering purposes
Peltola, S. M., Melchels, F. P. W., Grijpma, D. W., & Kellomäki, M. (2008) · Annals of Medicine · doi:10.1080/07853890701881788 · Cited by 751
Design and Fabrication of Human Skin by Three-Dimensional Bioprinting
Lee, V., Singh, G., Trasatti, J. P., Bjornsson, C., Xu, X., Tran, T. N., Yoo, S.-S., Dai, G., & Karande, P. (2014) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2013.0335 · Cited by 725
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
Bioprinting Toward Organ Fabrication: Challenges and Future Trends
Ozbolat, I. T., & Yu, Y. (2013) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2013.2243912 · Cited by 666
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Cheang, P., Abu Bakar, M. S., & Cha, S. W. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00131-5 · Cited by 625
A Tissue-Like Printed Material
Villar, G., Graham, A. D., & Bayley, H. (2013) · Science · doi:10.1126/science.1229495 · Cited by 613
Bioresorbable Airway Splint Created with a Three-Dimensional Printer
Zopf, D. A., Hollister, S. J., Nelson, M. E., Ohye, R. G., & Green, G. E. (2013) · New England Journal of Medicine · doi:10.1056/nejmc1206319 · Cited by 589
A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Das, S., Pati, F., Choi, Y.-J., Rijal, G., Shim, J.-H., Kim, S. W., Ray, A. R., Cho, D.-W., & Ghosh, S. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.023 · Cited by 553
Three-dimensional printing of Hela cells for cervical tumor model in vitro
Zhao, Y., Yao, R., Ouyang, L., Ding, H., Zhang, T., Zhang, K., Cheng, S., & Sun, W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035001 · Cited by 534
Viability and electrophysiology of neural cell structures generated by the inkjet printing method
Xu, T., Gregory, C. A., Molnar, P., Cui, X., Jalota, S., Bhaduri, S. B., & Boland, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.048 · Cited by 520
Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing
Leukers, B., Gülkan, H., Irsen, S. H., Milz, S., Tille, C., Schieker, M., & Seitz, H. (2005) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-005-4716-5 · Cited by 499
Bhardwaj, R., Fang, X., Somasundaran, P., & Attinger, D. (2010) · Langmuir · doi:10.1021/la9047227 · Cited by 499
Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling
Kalita, S. J., Bose, S., Hosick, H. L., & Bandyopadhyay, A. (2003) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(03)00052-3 · Cited by 488
High-resolution PLA-based composite scaffolds via 3-D printing technology
Serra, T., Planell, J. A., & Navarro, M. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.041 · Cited by 479
Selective laser sintering in biomedical engineering
Mazzoli, A. (2013) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-012-1001-x · Cited by 469
Composites by rapid prototyping technology
Kumar, S., & Kruth, J.-P. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.07.045 · Cited by 463
Cox, S. C., Thornby, J. A., Gibbons, G. J., Williams, M. A., & Mallick, K. K. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.11.024 · Cited by 452
Micro-stereolithography of polymeric and ceramic microstructures
Zhang, X., Jiang, X. N., & Sun, C. (1999) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(99)00189-2 · Cited by 450
A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
Li, C., Faulkner‐Jones, A., Dun, A. R., Jin, J., Chen, P., Xing, Y., Yang, Z., Li, Z., Shu, W., Liu, D., et al. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411383 · Cited by 423
Hsieh, F.-Y., Lin, H.-H., & Hsu, S.-H. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.028 · Cited by 420
Duan, B., Wang, M., Zhou, W. Y., Cheung, W. L., Li, Z. Y., & Lu, W. W. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.06.024 · Cited by 420
Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 410
Materials used in cranioplasty: a history and analysis
Shah, A. M., Jung, H., & Skirboll, S. (2014) · Neurosurgical Focus · doi:10.3171/2014.2.focus13561 · Cited by 389
Cell and organ printing 2: Fusion of cell aggregates in three‐dimensional gels
Boland, T., Mironov, V., Gutowska, A., Roth, E. A., & Markwald, R. R. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10059 · Cited by 382
3D modeling, custom implants and its future perspectives in craniofacial surgery
Parthasarathy, J. (2014) · Annals of Maxillofacial Surgery · doi:10.4103/2231-0746.133065 · Cited by 377
Patterning of controllable surface wettability for printing techniques
Tian, D., Song, Y., & Jiang, L. (2013) · Chemical Society Reviews · doi:10.1039/c3cs35501b · Cited by 372
Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting
Müller, M., Becher, J., Schnabelrauch, M., & Zenobi-Wong, M. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035006 · Cited by 371
Fu, Q., Saiz, E., & Tomsia, A. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.030 · Cited by 366
Inkjet printing ceramics: From drops to solid
Derby, B. (2011) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.01.016 · Cited by 365
Inkjet printing biomaterials for tissue engineering: bioprinting
Saunders, R. E., & Derby, B. (2014) · International Materials Reviews · doi:10.1179/1743280414y.0000000040 · Cited by 365
Tarafder, S., Balla, V. K., Davies, N. M., Bandyopadhyay, A., & Bose, S. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.555 · Cited by 364
Ceramic components manufacturing by selective laser sintering
Bertrand, P., Bayle, F., Combe, C., Goeuriot, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.085 · Cited by 351
Organ printing: from bioprinter to organ biofabrication line
Mironov, V., Kasyanov, V., & Markwald, R. R. (2011) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2011.02.006 · Cited by 343
Gao, G., Schilling, A. F., Hubbell, K., Yonezawa, T., Truong, D., Hong, Y., Dai, G., & Cui, X. (2015) · Biotechnology Letters · doi:10.1007/s10529-015-1921-2 · Cited by 341
3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration
Rosenzweig, D., Carelli, E., Steffen, T., Jarzem, P., & Haglund, L. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms160715118 · Cited by 326
Three-dimensional print of a liver for preoperative planning in living donor liver transplantation
Zein, N. N., Hanouneh, I. A., Bishop, P. D., Samaan, M., Eghtesad, B., Quintini, C., Miller, C., Yerian, L., & Klatte, R. (2013) · Liver Transplantation · doi:10.1002/lt.23729 · Cited by 326
Advances in Bioactive Hydrogels to Probe and Direct Cell Fate
DeForest, C. A., & Anseth, K. S. (2012) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-062011-080945 · Cited by 323
Biofabrication of multi-material anatomically shaped tissue constructs
Visser, J., Peters, B., Burger, T. J., Boomstra, J., Dhert, W. J. A., Melchels, F. P. W., & Malda, J. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035007 · Cited by 313
Zhang, J., Zhao, S., Zhu, Y., Huang, Y., Zhu, M., Tao, C., & Zhang, C. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.01.001 · Cited by 311
3D printing of bone substitute implants using calcium phosphate and bioactive glasses
Bergmann, C., Lindner, M., Zhang, W., Koczur, K., Kirsten, A., Telle, R., & Fischer, H. (2010) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2010.04.037 · Cited by 311
Current Progress in Bioactive Ceramic Scaffolds for Bone Repair and Regeneration
Gao, C., Deng, Y., Feng, P., Mao, Z., Li, P., Yang, B., Deng, J., Cao, Y., Shuai, C., & Peng, S. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15034714 · Cited by 310
Selective Laser Sintering of PEEK
Schmidt, M., Pohle, D., & Rechtenwald, T. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.05.097 · Cited by 305
Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., & Guiberteau, F. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31587 · Cited by 301
Depth and width of cured lines in photopolymerizable ceramic suspensions
Gentry, S. P., & Halloran, J. W. (2013) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2013.02.033 · Cited by 274
Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds
Michna, S., Wu, W., & Lewis, J. A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.040 · Cited by 266
Flow‐induced chain fracture of isolated linear macromolecules in solution
Odell, J. A., & Keller, A. (1986) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1986.090240901 · Cited by 256
Stanton, M. M., Samitier, J., & Sánchez, S. (2015) · Lab on a Chip · doi:10.1039/c5lc90069g · Cited by 252
Khalyfa, A., Vogt, S., Weisser, J., Grimm, G., Rechtenbach, A., Meyer, W., & Schnabelrauch, M. (2007) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-006-0073-2 · Cited by 247
Inkjet printing of macromolecules on hydrogels to steer neural stem cell differentiation
Ilkhanizadeh, S., Teixeira, A. I., & Hermanson, O. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.05.018 · Cited by 246
Three-Dimensional Bioprinting for Regenerative Dentistry and Craniofacial Tissue Engineering
Obregon, F., Vaquette, C., Ivanovski, S., Hutmacher, D. W., & Bertassoni, L. E. (2015) · Journal of Dental Research · doi:10.1177/0022034515588885 · Cited by 242
Progress in material design for biomedical applications
Tibbitt, M. W., Rodell, C. B., Burdick, J. A., & Anseth, K. S. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1516247112 · Cited by 242
Engineering synthetic hydrogel microenvironments to instruct stem cells
Guvendiren, M., & Burdick, J. A. (2013) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2013.03.009 · Cited by 234
Self-citationResorbable Dicalcium Phosphate Bone Substitutes Prepared by 3D Powder Printing
Gbureck, U., Hölzel, T., Klammert, U., Würzler, K., Müller, F. A., & Barralet, J. E. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200700019 · Cited by 233
3D bioprinting of photocrosslinkable hydrogel constructs
Pereira, R. F., & Bártolo, P. J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42458 · Cited by 232
Biofabrication: an overview of the approaches used for printing of living cells
Ferris, C. J., Gilmore, K. G., Wallace, G. G., & in het Panhuis, M. (2013) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-013-4853-6 · Cited by 227
Butscher, A., Bohner, M., Roth, C., Ernstberger, A., Heuberger, R., Doebelin, N., Rudolf von Rohr, P., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.08.027 · Cited by 224
Gonçalves, E. M., Oliveira, F. J., Silva, R. F., Neto, M. A., Fernandes, M. H., Amaral, M., Vallet‐Regí, M., & Vila, M. (2016) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33432 · Cited by 221
Drop-on-demand printing of cells and materials for designer tissue constructs
Boland, T., Tao, X., Damon, B. J., Manley, B., Kesari, P., Jalota, S., & Bhaduri, S. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.047 · Cited by 220
Tissue Engineering Applications of Three-Dimensional Bioprinting
Zhang, X., & Zhang, Y. (2015) · Cell Biochemistry and Biophysics · doi:10.1007/s12013-015-0531-x · Cited by 218
Direct write assembly of calcium phosphate scaffolds using a water-based hydrogel
Franco, J., Hunger, P., Launey, M. E., Tomsia, A. P., & Saiz, E. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.06.031 · Cited by 217
New developments in fused deposition modeling of ceramics
Bellini, A., Shor, L., & Guceri, S. I. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510612901 · Cited by 216
Fisher, J. P., Dean, D., & Mikos, A. G. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00178-3 · Cited by 216
Bio-ink for on-demand printing of living cells
Ferris, C. J., Gilmore, K. J., Beirne, S., McCallum, D., Wallace, G. G., & in het Panhuis, M. (2013) · Biomater. Sci. · doi:10.1039/c2bm00114d · Cited by 214
Biological response of intramedullary bone to poly‐L‐lactic acid
Suganuma, J., & Alexander, H. (1993) · Journal of Applied Biomaterials · doi:10.1002/jab.770040103 · Cited by 213
Snyder, J. E., Hamid, Q., Wang, C., Chang, R., Emami, K., Wu, H., & Sun, W. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034112 · Cited by 210
Metallic Architectures from 3D‐Printed Powder‐Based Liquid Inks
Jakus, A. E., Taylor, S. L., Geisendorfer, N. R., Dunand, D. C., & Shah, R. N. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503921 · Cited by 209
Jacobs, S., Grunert, R., Mohr, F. W., & Falk, V. (2008) · Interactive CardioVascular and Thoracic Surgery · doi:10.1510/icvts.2007.156588 · Cited by 206
Organ printing: the future of bone regeneration?
Fedorovich, N. E., Alblas, J., Hennink, W. E., Öner, F. C., & Dhert, W. J. A. (2011) · Trends in Biotechnology · doi:10.1016/j.tibtech.2011.07.001 · Cited by 206
Ripley, B., Kelil, T., Cheezum, M. K., Goncalves, A., Di Carli, M. F., Rybicki, F. J., Steigner, M., Mitsouras, D., & Blankstein, R. (2016) · Journal of Cardiovascular Computed Tomography · doi:10.1016/j.jcct.2015.12.004 · Cited by 205
Tarafder, S., & Bose, S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501048n · Cited by 204
Solvent‐Cast Three‐Dimensional Printing of Multifunctional Microsystems
Guo, S., Gosselin, F., Guerin, N., Lanouette, A., Heuzey, M., & Therriault, D. (2013) · Small · doi:10.1002/smll.201300975 · Cited by 203
The morphology of anisotropic 3D-printed hydroxyapatite scaffolds
Fierz, F. C., Beckmann, F., Huser, M., Irsen, S. H., Leukers, B., Witte, F., Degistirici, Ö., Andronache, A., Thie, M., & Müller, B. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.06.012 · Cited by 203
Evaluation of Photocrosslinked Lutrol Hydrogel for Tissue Printing Applications
Fedorovich, N. E., Swennen, I., Girones, J., Moroni, L., van Blitterswijk, C. A., Schacht, E., Alblas, J., & Dhert, W. J. A. (2009) · Biomacromolecules · doi:10.1021/bm801463q · Cited by 202
3D printed PLA-based scaffolds: A versatile tool in regenerative medicine
Serra, T., Mateos-Timoneda, M. A., Planell, J. A., & Navarro, M. (2013) · Organogenesis · doi:10.4161/org.26048 · Cited by 197
Peptide Bioink: Self-Assembling Nanofibrous Scaffolds for Three-Dimensional Organotypic Cultures
Loo, Y., Lakshmanan, A., Ni, M., Toh, L. L., Wang, S., & Hauser, C. A. E. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02859 · Cited by 196
Inkjet printing for pharmaceutical applications
Boehm, R. D., Miller, P. R., Daniels, J., Stafslien, S., & Narayan, R. J. (2014) · Materials Today · doi:10.1016/j.mattod.2014.04.027 · Cited by 182
Porous ceramic bone scaffolds for vascularized bone tissue regeneration
Will, J., Melcher, R., Treul, C., Travitzky, N., Kneser, U., Polykandriotis, E., Horch, R., & Greil, P. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3346-5 · Cited by 179
A Printable Photopolymerizable Thermosensitive p(HPMAm‐lactate)‐PEG Hydrogel for Tissue Engineering
Censi, R., Schuurman, W., Malda, J., di Dato, G., Burgisser, P. E., Dhert, W. J. A., van Nostrum, C. F., di Martino, P., Vermonden, T., & Hennink, W. E. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002428 · Cited by 171
Additive manufacturing for in situ repair of osteochondral defects
Cohen, D. L., Lipton, J. I., Bonassar, L. J., & Lipson, H. (2010) · Biofabrication · doi:10.1088/1758-5082/2/3/035004 · Cited by 169
Ali, M., Pagès, E., Ducom, A., Fontaine, A., & Guillemot, F. (2014) · Biofabrication · doi:10.1088/1758-5082/6/4/045001 · Cited by 164
3D Powder Printing of β‐Tricalcium Phosphate Ceramics Using Different Strategies
Vorndran, E., Klarner, M., Klammert, U., Grover, L. M., Patel, S., Barralet, J. E., & Gbureck, U. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800179 · Cited by 164
Evaluation of an alginate–gelatine crosslinked hydrogel for bioplotting
Zehnder, T., Sarker, B., Boccaccini, A. R., & Detsch, R. (2015) · Biofabrication · doi:10.1088/1758-5090/7/2/025001 · Cited by 163
Lee, H. J., Kim, Y. B., Ahn, S. H., Lee, J., Jang, C. H., Yoon, H., Chun, W., & Kim, G. H. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500193 · Cited by 158
A novel system for fused deposition of advanced multiple ceramics
Jafari, M. A., Han, W., Mohammadi, F., Safari, A., Danforth, S. C., & Langrana, N. A. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337047 · Cited by 154
In vitro -Osteoclastic Activity Studies on Surfaces of 3D Printed Calcium Phosphate Scaffolds
Detsch, R., Schaefer, S., Deisinger, U., Ziegler, G., Seitz, H., & Leukers, B. (2010) · Journal of Biomaterials Applications · doi:10.1177/0885328210373285 · Cited by 152
Roy, T. D., Simon, J. L., Ricci, J. L., Rekow, E. D., Thompson, V. P., & Parsons, J. R. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.20034 · Cited by 145
Zirconia/alumina functionally graded material made by ceramic ink jet printing
Mott, M., & Evans, J. R. G. (1999) · Materials Science and Engineering A · doi:10.1016/s0921-5093(99)00266-x · Cited by 145
Jansen, J., Melchels, F. P. W., Grijpma, D. W., & Feijén, J. (2008) · Biomacromolecules · doi:10.1021/bm801001r · Cited by 136
Carbonated calcium phosphates are suitable pH-stabilising fillers for biodegradable polyesters
Schiller, C., & Epple, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00634-8 · Cited by 133
Bian, W., Li, D., Lian, Q., Li, X., Zhang, W., Wang, K., & Jin, Z. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211193511 · Cited by 130
Fabrication of PCL/β‐TCP scaffolds by 3D mini‐screw extrusion printing
Dávila, J. L., de Freitas, M. S., Neto, P. I., Silveira, Z. D. C., da Silva, J. V. L., & d’Ávila, M. A. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.43031 · Cited by 130
Tarafder, S., Dernell, W. S., Bandyopadhyay, A. K., & Bose, S. (2014) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33239 · Cited by 129
3D Printing of Scaffold for Cells Delivery: Advances in Skin Tissue Engineering
Singh, D., Singh, D., & Han, S. S. (2016) · Polymers · doi:10.3390/polym8010019 · Cited by 128
Trabecular scaffolds created using micro CT guided fused deposition modeling
Tellis, B. C., Szivek, J. A., Bliss, C. L., Margolis, D. S., Vaidyanathan, R. K., & Calvert, P. (2007) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.11.010 · Cited by 125
The Recent Revolution in the Design and Manufacture of Cranial Implants
Bonda, D., Manjila, S. V., Selman, W. R., & Dean, D. (2015) · Neurosurgery · doi:10.1227/neu.0000000000000899 · Cited by 125
Ding, C., Qiao, Z., Jiang, W., Li, H., Wei, J., Zhou, G., & Dai, K. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.05.038 · Cited by 123
Shanjani, Y., Croos, J. N. A. D., Pilliar, R. M., et al. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31610 · Cited by 121
3D printing of an extremely tough hydrogel
Wei, J., Wang, J., Su, S., Wang, S., Qiu, J., Zhang, Z., Christopher, G. F., Ning, F., & Cong, W. (2015) · RSC Advances · doi:10.1039/c5ra16362e · Cited by 120
Three-Dimensional Printing of Hollow-Struts-Packed Bioceramic Scaffolds for Bone Regeneration
Luo, Y., Zhai, D., Huan, Z., Zhu, H., Xia, L., Chang, J., & Wu, C. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b08911 · Cited by 112
Formulation and Multilayer Jet Printing of Ceramic Inks
Song, J., Edirisinghe, M. J., & Evans, J. (1999) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1999.tb02253.x · Cited by 110
Development of a binder formulation for fused deposition of ceramics
McNulty, T. F., Mohammadi, F., Bandyopadhyay, A. K., Shanefield, D. J., Danforth, S. C., & Safari, A. (1998) · Rapid Prototyping Journal · doi:10.1108/13552549810239012 · Cited by 109
Moisture based three-dimensional printing of calcium phosphate structures for scaffold engineering
Butscher, A., Bohner, M., Doebelin, N., Galea, L., Loeffel, O., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.009 · Cited by 106
(1992) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/iembs.1992.589272 · Cited by 101
Luo, Y., Lode, A., Akkineni, A. R., & Gelinsky, M. (2015) · RSC Advances · doi:10.1039/c5ra04308e · Cited by 91
Dadsetan, M., Guda, T., Runge, M. B., Mijares, D. Q., LeGeros, R. Z., LeGeros, J. P., Silliman, D. T., Lu, L., Wenke, J. C., Baer, P. R. B., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.12.024 · Cited by 87
3D printing of resorbable poly(propylene fumarate) tissue engineering scaffolds
Childers, E. P., Wang, M. O., Becker, M. L., Fisher, J. P., & Dean, D. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.2 · Cited by 84
Dorj, B., Won, J., Kim, J., Choi, S., Shin, U. S., & Kim, H. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34470 · Cited by 82
Costa, P. F., Puga, A. M., Díaz-Gomez, L., Concheiro, A., Busch, D. H., & Alvarez-Lorenzo, C. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.10.055 · Cited by 78
Konopnicki, S., Sharaf, B. A., Resnick, C. M., Patenaude, A., Pogal-Sussman, T., Hwang, K., Abukawa, H., & Troulis, M. J. (2015) · Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.joms.2015.01.021 · Cited by 72
Pietrabissa, A., Marconi, S., Peri, A., Pugliese, L., Cavazzi, E., Vinci, A., Botti, M., & Auricchio, F. (2015) · Surgical Endoscopy · doi:10.1007/s00464-015-4185-y · Cited by 71
Biofabrication of reinforced 3D-scaffolds using two-component hydrogels
Boere, K. W. M., Blokzijl, M. M., Visser, J., Linssen, J. E. A., Malda, J., Hennink, W. E., & Vermonden, T. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb01645b · Cited by 69
Castilho, M. D., Rodrigues, J. M. C., Pires, I., Gouveia, B., Pereira, M. F. C., Moseke, C., Gröll, J., Ewald, A., & Vorndran, E. (2015) · Biofabrication · doi:10.1088/1758-5090/7/1/015004 · Cited by 67
Özkol, E., Ebert, J., Uibel, K., Wätjen, A. M., & Telle, R. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.06.020 · Cited by 66
Diogo, G. S., Gaspar, V. M., Serra, I. R., Fradique, R., & Correia, I. J. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/025001 · Cited by 60
3D Printing of Octacalcium Phosphate Bone Substitutes
Комлев, В. С., Popov, V. K., Mironov, A. V., Fedotov, A. Y., Teterina, A. Y., Смирнов, И. В., Bozo, I. Y., Александровна, Р. В., & Deev, R. V. (2015) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2015.00081 · Cited by 57
Chemical and Radiation Stability of PEEK
Kurtz, S. M. (2011) · Elsevier eBooks · doi:10.1016/b978-1-4377-4463-7.10006-5 · Cited by 51
Supramolecular Approach to New Inkjet Printing Inks
Hart, L. R., Harries, J. L., Greenland, B. W., et al. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01569 · Cited by 51
Rehand: Realistic electric prosthetic hand created with a 3D printer
Yoshikawa, M., Sato, R., Higashihara, T., Ogasawara, T., & Kawashima, N. (2015) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/embc.2015.7318894 · Cited by 51
Inkjet printing of bioadhesives
Doraiswamy, A., Dunaway, T. M., Wilker, J. J., & Narayan, R. J. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31183 · Cited by 49
Barry, J. J. A., Evseev, A. V., Марков, М. А., Upton, C. E., Scotchford, C. A., Popov, V. K., & Howdle, S. M. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.05.024 · Cited by 41
Radder, A. M., Leenders, H., & van Blitterswijk, C. (1995) · Biomaterials · doi:10.1016/0142-9612(95)91122-f · Cited by 29
Polymeric hydrogels as artificial extracellular microenvironments for cancer research
Park, K. M., & Gerecht, S. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.06.030 · Cited by 23
Hart, L. R., Harries, J. L., Greenland, B. W., Colquhoun, H. M., & Hayes, W. (2015) · Polymer Chemistry · doi:10.1039/c5py00622h · Cited by 12
3D printing of hyaluronic acid scaffolds for tissue engineering applications
Osterbur, L. W. (2013) · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign) · Cited by 3
Cited by
Materials design for bone-tissue engineering
Koons, G. L., Diba, M., & Mikos, A. G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0204-2 · Cited by 1,699
3D bioactive composite scaffolds for bone tissue engineering
Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,332
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Recent trends in bioinks for 3D printing
Gopinathan, J., & Noh, I. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0122-1 · Cited by 846
Biofabrication strategies for 3D in vitro models and regenerative medicine
Moroni, L., Burdick, J. A., Highley, C., Lee, S. J., Morimoto, Y., Takeuchi, S., & Yoo, J. J. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0006-y · Cited by 753
Metadata
- Authors
- Guvendiren, M., Molde, J., Soares, R. M. D., & Kohn, J.
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-04-27
- Volume
- 2
- Issue
- 10
- Pages
- 1679-1693
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2340802051
- Cited by
- 732
- References
- 158
- FWCI
- 31.77
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.