The DOI matches its Crossref record; 192 of the 192 references it cites were found in a registry or an index.
A review of recent developments in rechargeable lithium–sulfur batteries
Abstract
The research and development of advanced energy-storage systems must meet a large number of requirements, including high energy density, natural abundance of the raw material, low cost and environmental friendliness, and particularly reasonable safety. As the demands of high-performance batteries are continuously increasing, with large-scale energy storage systems and electric mobility equipment, lithium–sulfur batteries have become an attractive candidate for the new generation of high-performance batteries due to their high theoretical capacity (1675 mA h g−1) and energy density (2600 Wh kg−1). However, rapid capacity attenuation with poor cycle and rate performances make the batteries far from ideal with respect to real commercial applications. Outstanding breakthroughs and achievements have been made to alleviate these problems in the past ten years. This paper presents an overview of recent advances in lithium–sulfur battery research. We cover the research and development to date on various components of lithium–sulfur batteries, including cathodes, binders, separators, electrolytes, anodes, collectors, and some novel cell configurations. The current trends in materials selection for batteries are reviewed and various choices of cathode, binder, electrolyte, separator, anode, and collector materials are discussed. The current challenges associated with the use of batteries and their materials selection are listed and future perspectives for this class of battery are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries
Arora, P., White, R. E., & Doyle, M. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838857 · Cited by 1,408
Tao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391
Metal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Lithium sulfur batteries, a mechanistic review
Wild, M., O'Neill, L., Zhang, T., Purkayastha, R., Minton, G., Marinescu, M., & Offer, G. J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01388g · Cited by 1,107
Gao, H., Yang, Z., Zhang, S., Cao, S., Shen, S., Pang, Z., & Jiang, X. (2014) · Scientific Reports · doi:10.1038/srep05138 · Cited by 1,061
Zhou, G., Paek, E., Hwang, G. S., & Manthiram, A. (2015) · Nature Communications · doi:10.1038/ncomms8760 · Cited by 1,058
Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M. H., Saraf, L. V., Nie, Z., Exarhos, G. J., & Liu, J. (2012) · Advanced Materials · doi:10.1002/adma.201103392 · Cited by 1,016
Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte
Zhou, W., Wang, S., Li, Y., Xin, S., Manthiram, A., & Goodenough, J. B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05341 · Cited by 1,006
A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries
Zhou, G., Pei, S., Li, L., Wang, D., Wang, S., Huang, K., Yin, L., Li, F., & Cheng, H. (2014) · Advanced Materials · doi:10.1002/adma.201302877 · Cited by 997
Self-citationRole of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Elazari, R., Salitra, G., Garsuch, A., Panchenko, A., & Aurbach, D. (2011) · Advanced Materials · doi:10.1002/adma.201103274 · Cited by 895
Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer Coating
Yang, Y., Yu, G., Cha, J. J., Wu, H., Vosgueritchian, M., Yao, Y., Bao, Z., & Cui, Y. (2011) · ACS Nano · doi:10.1021/nn203436j · Cited by 866
Li, Z., Zhang, J., & Lou, X. W. (. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506972 · Cited by 841
Huang, J.-Q., Zhuang, T.-Z., Zhang, Q., Peng, H.-J., Chen, C.-M., & Wei, F. (2015) · ACS Nano · doi:10.1021/nn507178a · Cited by 809
Li, G., Sun, J., Hou, W., Jiang, S., Huang, Y., & Geng, J. (2016) · Nature Communications · doi:10.1038/ncomms10601 · Cited by 806
Yolk–Shell Structure of Polyaniline-Coated Sulfur for Lithium–Sulfur Batteries
Zhou, W., Yu, Y., Chen, H., DiSalvo, F. J., & Abruña, H. D. (2013) · Journal of the American Chemical Society · doi:10.1021/ja409508q · Cited by 782
Pang, Q., Tang, J., Huang, H., Liang, X., Hart, C., Tam, K. C., & Nazar, L. F. (2015) · Advanced Materials · doi:10.1002/adma.201502467 · Cited by 780
Song, J., Gordin, M. L., Xu, T., Chen, S., Yu, Z., Sohn, H., Lu, J., Ren, Y., Duan, Y., & Wang, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411109 · Cited by 776
Fibrous Hybrid of Graphene and Sulfur Nanocrystals for High-Performance Lithium–Sulfur Batteries
Zhou, G., Yin, L.-C., Wang, D.-W., Li, L., Pei, S., Gentle, I. R., Li, F., & Cheng, H.-M. (2013) · ACS Nano · doi:10.1021/nn401228t · Cited by 761
Self-citationSu, Y.-S., & Manthiram, A. (2012) · Chemical Communications · doi:10.1039/c2cc33945e · Cited by 755
High-Rate, Ultralong Cycle-Life Lithium/Sulfur Batteries Enabled by Nitrogen-Doped Graphene
Qiu, Y., Li, W., Zhao, W., Li, G., Hou, Y., Liu, M., Zhou, L., Ye, F., Li, H., Wei, Z., et al. (2014) · Nano Letters · doi:10.1021/nl5020475 · Cited by 738
Zhang, R., Cheng, X., Zhao, C., Peng, H., Shi, J., Huang, J., Wang, J., Wei, F., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201504117 · Cited by 686
Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries
Huang, J.-Q., Zhang, Q., Peng, H.-J., Liu, X.-Y., Qian, W.-Z., & Wei, F. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42223b · Cited by 679
Unstacked double-layer templated graphene for high-rate lithium–sulphur batteries
Zhao, M.-Q., Zhang, Q., Huang, J.-Q., Tian, G.-L., Nie, J.-Q., Peng, H.-J., & Wei, F. (2014) · Nature Communications · doi:10.1038/ncomms4410 · Cited by 664
New Nanostructured Li2S/Silicon Rechargeable Battery with High Specific Energy
Yang, Y., McDowell, M. T., Jackson, A., Cha, J. J., Hong, S. S., & Cui, Y. (2010) · Nano Letters · doi:10.1021/nl100504q · Cited by 653
Gao, J., Lowe, M. A., Kiya, Y., & Abruña, H. D. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp207714c · Cited by 600
Lithium salts for advanced lithium batteries: Li–metal, Li–O2, and Li–S
Younesi, R., Veith, G. M., Johansson, P., Edström, K., & Vegge, T. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01215e · Cited by 600
A novel synergistic composite with multi-functional effects for high-performance Li–S batteries
Li, Y.-J., Fan, J.-M., Zheng, M.-S., & Dong, Q.-F. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00104a · Cited by 600
A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte
Rauh, R. D., Abraham, K. M., Pearson, G. F., Surprenant, J. K., & Brummer, S. B. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2129079 · Cited by 592
A Flexible Sulfur‐Graphene‐Polypropylene Separator Integrated Electrode for Advanced Li–S Batteries
Zhou, G., Li, L., Wang, D., Shan, X., Pei, S., Li, F., & Cheng, H. (2015) · Advanced Materials · doi:10.1002/adma.201404210 · Cited by 590
Self-citationLi, Z., Jiang, Y., Yuan, L., Yi, Z., Wu, C., Liu, Y., Strasser, P., & Huang, Y. (2014) · ACS Nano · doi:10.1021/nn503220h · Cited by 590
Tang, C., Zhang, Q., Zhao, M., Huang, J., Cheng, X., Tian, G., Peng, H., & Wei, F. (2014) · Advanced Materials · doi:10.1002/adma.201401243 · Cited by 586
Metal–Sulfur Battery Cathodes Based on PAN–Sulfur Composites
Wei, S., Ma, L., Hendrickson, K. E., Tu, Z., & Archer, L. A. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08113 · Cited by 579
Carbon Nanocages as Supercapacitor Electrode Materials
Xie, K., Qin, X., Wang, X., Wang, Y., Tao, H., Wu, Q., Yang, L., & Hu, Z. (2012) · Advanced Materials · doi:10.1002/adma.201103872 · Cited by 574
A graphene foam electrode with high sulfur loading for flexible and high energy Li-S batteries
Zhou, G., Li, L., Ma, C., Wang, S., Shi, Y., Koratkar, N., Ren, W., Li, F., & Cheng, H.-M. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.025 · Cited by 570
Self-citationProgress in electrolytes for rechargeable Li-based batteries and beyond
Li, Q., Chen, J., Fan, L., Kong, X., & Lu, Y. (2016) · Green Energy & Environment · doi:10.1016/j.gee.2016.04.006 · Cited by 569
Self-citationSong, J., Yu, Z., Gordin, M. L., & Wang, D. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03217 · Cited by 561
Zhao, M.-Q., Liu, X.-F., Zhang, Q., Tian, G.-L., Huang, J.-Q., Zhu, W., & Wei, F. (2012) · ACS Nano · doi:10.1021/nn304037d · Cited by 553
Peng, H., Huang, J., Zhao, M., Zhang, Q., Cheng, X., Liu, X., Qian, W., & Wei, F. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303296 · Cited by 552
3D Interconnected Electrode Materials with Ultrahigh Areal Sulfur Loading for Li–S Batteries
Fang, R., Zhao, S., Hou, P., Cheng, M., Wang, S., Cheng, H., Liu, C., & Li, F. (2016) · Advanced Materials · doi:10.1002/adma.201506014 · Cited by 532
Yao, H., Yan, K., Li, W., Zheng, G., Kong, D., Seh, Z. W., Narasimhan, V. K., Liang, Z., & Cui, Y. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01377h · Cited by 526
Pie-like electrode design for high-energy density lithium–sulfur batteries
Li, Z., Zhang, J. T., Chen, Y. M., Li, J., & Lou, X. W. (2015) · Nature Communications · doi:10.1038/ncomms9850 · Cited by 524
Wu, F., Chen, J., Chen, R., Wu, S., Li, L., Chen, S., & Zhao, T. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1114724 · Cited by 520
Self-citationRecent progress and remaining challenges in sulfur-based lithium secondary batteries – a review
Bresser, D., Passerini, S., & Scrosati, B. (2013) · Chemical Communications · doi:10.1039/c3cc46131a · Cited by 514
Li, Z., Yuan, L., Yi, Z., Sun, Y., Liu, Y., Jiang, Y., Shen, Y., Xin, Y., Zhang, Z., & Huang, Y. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301473 · Cited by 481
Tatsumisago, M., Nagao, M., & Hayashi, A. (2013) · Journal of Asian Ceramic Societies · doi:10.1016/j.jascer.2013.03.005 · Cited by 471
Novel gel polymer electrolyte for high-performance lithium–sulfur batteries
Liu, M., Zhou, D., He, Y.-B., Fu, Y., Qin, X., Miao, C., Du, H., Li, B., Yang, Q.-H., Lin, Z., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.008 · Cited by 465
Li, Z., Li, C., Ge, X., Ma, J., Zhang, Z., Li, Q., Wang, C., & Yin, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.049 · Cited by 449
Self-citationStable cycling of lithium sulfide cathodes through strong affinity with a bifunctional binder
Seh, Z. W., Zhang, Q., Li, W., Zheng, G., Yao, H., & Cui, Y. (2013) · Chemical Science · doi:10.1039/c3sc51476e · Cited by 442
Recent advances in lithium–sulfur batteries
Chen, L., & Shaw, L. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.111 · Cited by 432
Li, Z., Huang, Y., Yuan, L., Hao, Z., & Huang, Y. (2015) · Carbon · doi:10.1016/j.carbon.2015.03.008 · Cited by 429
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
A Long-Life, High-Rate Lithium/Sulfur Cell: A Multifaceted Approach to Enhancing Cell Performance
Song, M.-K., Zhang, Y., & Cairns, E. J. (2013) · Nano Letters · doi:10.1021/nl402793z · Cited by 427
A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteries
Pang, Q., Kundu, D., & Nazar, L. F. (2016) · Materials Horizons · doi:10.1039/c5mh00246j · Cited by 424
Al2O3-coated porous separator for enhanced electrochemical performance of lithium sulfur batteries
Zhang, Z., Lai, Y., Zhang, Z., Zhang, K., & Li, J. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.02.077 · Cited by 418
Hassoun, J., & Scrosati, B. (2010) · Advanced Materials · doi:10.1002/adma.201002584 · Cited by 415
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.041 · Cited by 414
Pang, Q., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07347 · Cited by 411
Zhou, D., Liu, R., He, Y., Li, F., Liu, M., Li, B., Yang, Q., Cai, Q., & Kang, F. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502214 · Cited by 408
Zhao, Y., Wu, W., Li, J., Xu, Z., & Guan, L. (2014) · Advanced Materials · doi:10.1002/adma.201401191 · Cited by 404
Cheng, X.-B., Huang, J.-Q., Zhang, Q., Peng, H.-J., Zhao, M.-Q., & Wei, F. (2014) · Nano Energy · doi:10.1016/j.nanoen.2013.12.013 · Cited by 403
Lithium–sulfur batteries: from liquid to solid cells
Lin, Z., & Liang, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04727c · Cited by 399
Yang, X., Zhang, L., Zhang, F., Huang, Y., & Chen, Y. (2014) · ACS Nano · doi:10.1021/nn501284q · Cited by 396
Tang, C., Li, B., Zhang, Q., Zhu, L., Wang, H., Shi, J., & Wei, F. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503726 · Cited by 388
Embedding Sulfur in MOF‐Derived Microporous Carbon Polyhedrons for Lithium–Sulfur Batteries
Wu, H. B., Wei, S., Zhang, L., Xu, R., Hng, H. H., & Lou, X. W. (. (2013) · Chemistry – A European Journal · doi:10.1002/chem.201301689 · Cited by 386
A lithium anode protection guided highly-stable lithium–sulfur battery
Ma, G., Wen, Z., Wu, M., Shen, C., Wang, Q., Jin, J., & Wu, X. (2014) · Chem. Commun. · doi:10.1039/c4cc05535g · Cited by 382
Li, W., Zheng, G., Yang, Y., Seh, Z. W., Liu, N., & Cui, Y. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1220992110 · Cited by 379
Carbonized Eggshell Membrane as a Natural Polysulfide Reservoir for Highly Reversible Li‐S Batteries
Chung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201304365 · Cited by 375
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.07.118 · Cited by 371
In Situ Reactive Assembly of Scalable Core–Shell Sulfur–MnO2 Composite Cathodes
Liang, X. M., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07458 · Cited by 371
Miao, R., Yang, J., Feng, X., Jia, H., Wang, J., & Nuli, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.011 · Cited by 361
Wang, X., Li, G., Li, J., Zhang, Y., Wook, A., Yu, A., & Chen, Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00194g · Cited by 360
Peng, H., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500268 · Cited by 348
Yu, M., Ma, J., Song, H., Wang, A., Tian, F., Wang, Y., Qiu, H., & Wang, R. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03902a · Cited by 345
A Graphene Foam Electrode with High Sulfur Loading for Flexible and High-Energy Li–S Batteries
Zhou, G. (2017) · Springer Theses · doi:10.1007/978-981-10-3406-0_6 · Cited by 344
Li, Z., Yuan, L., Yi, Z., Liu, Y., Xin, Y., Zhang, Z., & Huang, Y. (2013) · ECS Meeting Abstracts · doi:10.1149/ma2013-02/2/42 · Cited by 322
Qie, L., Zu, C., & Manthiram, A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502459 · Cited by 321
Cheng, X.-B., Peng, H.-J., Huang, J.-Q., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2015) · ACS Nano · doi:10.1021/acsnano.5b01990 · Cited by 321
Confined Sulfur in Microporous Carbon Renders Superior Cycling Stability in Li/S Batteries
Xu, Y., Wen, Y., Zhu, Y., Gaskell, K., Cychosz, K. A., Eichhorn, B., Xu, K., & Wang, C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500983 · Cited by 311
Ding, Y., Kopold, P., Hahn, K., van Aken, P. A., Maier, J., & Yu, Y. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504294 · Cited by 310
Dörfler, S., Hagen, M., Althues, H., Tübke, J., Kaskel, S., & Hoffmann, M. J. (2012) · Chemical Communications · doi:10.1039/c2cc17925c · Cited by 299
Nagao, M., Hayashi, A., Tatsumisago, M., Kanetsuku, T., Tsuda, T., & Kuwabata, S. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51059j · Cited by 299
Reduced polysulfide shuttle in lithium–sulfur batteries using Nafion-based separators
Bauer, I., Thieme, S., Brückner, J., Althues, H., & Kaskel, S. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.090 · Cited by 288
Chung, S., Han, P., Singhal, R., Kalra, V., & Manthiram, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500738 · Cited by 280
Toward More Reliable Lithium–Sulfur Batteries: An All-Graphene Cathode Structure
Fang, R., Zhao, S., Pei, S., Qian, X., Hou, P.-X., Cheng, H.-M., Liu, C., & Li, F. (2016) · ACS Nano · doi:10.1021/acsnano.6b04019 · Cited by 280
Reduced graphene oxide film as a shuttle-inhibiting interlayer in a lithium–sulfur battery
Wang, X., Wang, Z., & Chen, L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.063 · Cited by 274
Gu, X., Tong, C.-J., Lai, C., Qiu, J., Huang, X., Yang, W., Wen, B., Liu, L.-M., Hou, Y., & Zhang, S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04255k · Cited by 270
Wang, J., Yao, Z., Monroe, C. W., Yang, J., & Nuli, Y. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201847 · Cited by 266
Porous graphene oxide/carbon nanotube hybrid films as interlayer for lithium-sulfur batteries
Huang, J.-Q., Xu, Z.-L., Abouali, S., Akbari Garakani, M., & Kim, J.-K. (2016) · Carbon · doi:10.1016/j.carbon.2015.12.081 · Cited by 266
Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode
Zhao, C.-Z., Cheng, X.-B., Zhang, R., Peng, H.-J., Huang, J.-Q., Ran, R., Huang, Z.-H., Wei, F., & Zhang, Q. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.01.007 · Cited by 260
Hierarchical carbon nanocages confining high-loading sulfur for high-rate lithium–sulfur batteries
Lyu, Z., Xu, D., Yang, L., Che, R., Feng, R., Zhao, J., Li, Y., Wu, Q., Wang, X., & Hu, Z. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.01.033 · Cited by 258
Zhu, J., Chen, C., Lu, Y., Zang, J., Jiang, M., Kim, D., & Zhang, X. (2016) · Carbon · doi:10.1016/j.carbon.2016.02.007 · Cited by 256
Peng, H., Xu, W., Zhu, L., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602071 · Cited by 256
Yan, C., Cheng, X.-B., Zhao, C.-Z., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.056 · Cited by 255
Huang, J.-Q., Liu, X.-F., Zhang, Q., Chen, C.-M., Zhao, M.-Q., Zhang, S.-M., Zhu, W., Qian, W.-Z., & Wei, F. (2013) · Nano Energy · doi:10.1016/j.nanoen.2012.10.003 · Cited by 254
Advanced engineering of nanostructured carbons for lithium–sulfur batteries
Wang, J.-G., Xie, K., & Wei, B. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.05.006 · Cited by 247
The critical role of lithium nitrate in the gas evolution of lithium–sulfur batteries
Jozwiuk, A., Berkes, B. B., Weiss, T. M., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00789a · Cited by 245
Chen, H., Dong, W., Ge, J., Wang, C., Wu, X., Lu, W., & Chen, L. (2013) · Scientific Reports · doi:10.1038/srep01910 · Cited by 233
Tumor Vasculature Targeted Photodynamic Therapy for Enhanced Delivery of Nanoparticles
Zhen, Z., Tang, W., Chuang, Y.-J., Todd, T., Zhang, W., Lin, X., Niu, G., Liu, G., Wang, L., Pan, Z., et al. (2014) · ACS Nano · doi:10.1021/nn501134q · Cited by 228
Zhang, Y., Zhao, Y., Yermukhambetova, A., Bakenov, Z., & Chen, P. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00105e · Cited by 227
Xiang, H., Shi, P., Bhattacharya, P., Chen, X., Mei, D., Bowden, M. E., Zheng, J., Zhang, J.-G., & Xu, W. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.017 · Cited by 225
Electrochemical performance of lithium/sulfur batteries with protected Li anodes
Lee, Y. M., Choi, N.-S., Park, J. H., & Park, J.-K. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00300-8 · Cited by 223
He, J., Chen, Y., Li, P., Fu, F., Wang, Z., & Zhang, W. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04445f · Cited by 222
Wang, J., Lin, F., Jia, H., Yang, J., Monroe, C. W., & NuLi, Y. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405157 · Cited by 220
Song, M.-S., Han, S.-C., Kim, H.-S., Kim, J.-H., Kim, K.-T., Kang, Y.-M., Ahn, H.-J., Dou, S. X., & Lee, J.-Y. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1710895 · Cited by 218
Choi, Y., Chung, Y.-D., Baek, C.-Y., et al. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.02.053 · Cited by 215
Park, J.-W., Yamauchi, K., Takashima, E., Tachikawa, N., Ueno, K., Dokko, K., & Watanabe, M. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp400153m · Cited by 213
Zhu, J., Ge, Y., Kim, D., Lu, Y., Chen, C., Jiang, M., & Zhang, X. (2016) · Nano Energy · doi:10.1016/j.nanoen.2015.12.022 · Cited by 209
Babu, G., Ababtain, K., Ng, K. Y. S., & Arava, L. M. R. (2015) · Scientific Reports · doi:10.1038/srep08763 · Cited by 209
Li, H., Su, Y., Sun, W., & Wang, Y. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201601631 · Cited by 205
Lu, S., Chen, Y., Wu, X., Wang, Z., & Li, Y. (2014) · Scientific Reports · doi:10.1038/srep04629 · Cited by 203
Chang, C.-H., Chung, S.-H., & Manthiram, A. (2016) · Small · doi:10.1002/smll.201502505 · Cited by 194
Xing, L., Xi, K., Li, Q., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.10.097 · Cited by 193
Self-citationAssary, R. S., Curtiss, L. A., & Moore, J. S. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5015466 · Cited by 190
Application of gelatin as a binder for the sulfur cathode in lithium–sulfur batteries
Sun, J., Huang, Y., Wang, W., Yu, Z., Wang, A., & Yuan, K. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.05.022 · Cited by 188
Zhu, L., Peng, H.-J., Liang, J., Huang, J.-Q., Chen, C.-M., Guo, X., Zhu, W., Li, P., & Zhang, Q. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.062 · Cited by 184
Carbon‐Based Anodes for Lithium Sulfur Full Cells with High Cycle Stability
Brückner, J., Thieme, S., Böttger‐Hiller, F., Bauer, I., Grossmann, H. T., Strubel, P., Althues, H., Spange, S., & Kaskel, S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302169 · Cited by 184
Wang, X., Li, G., Seo, M. H., Hassan, F. M., Hoque, M. A., & Chen, Z. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501106 · Cited by 179
Huang, Y., Zheng, M., Lin, Z., Zhao, B., Zhang, S., Yang, J., Zhu, C., Zhang, H., Sun, D., & Shi, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01515d · Cited by 178
Polysulfide-Blocking Microporous Polymer Membrane Tailored for Hybrid Li-Sulfur Flow Batteries
Li, C., Ward, A. L., Doris, S. E., Pascal, T. A., Prendergast, D., & Helms, B. A. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02078 · Cited by 178
Phosphorene as a promising anchoring material for lithium–sulfur batteries: a computational study
Zhao, J., Yang, Y., Katiyar, R. S., & Chen, Z. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00871b · Cited by 177
Liu, S., Li, G.-R., & Gao, X.-P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12231 · Cited by 177
Ma, G., Wen, Z., Wang, Q., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.141 · Cited by 172
Improved cycle stability and high security of Li-B alloy anode for lithium–sulfur battery
Zhang, X., Wang, W., Wang, A., Huang, Y., Yuan, K., Yu, Z., Qiu, J., & Yang, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta01709a · Cited by 168
Ponraj, R., Kannan, A. G., Ahn, J. H., & Kim, D.-W. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11327 · Cited by 168
Shaibani, M., Akbari, A., Sheath, P., Easton, C. D., Banerjee, P. C., Konstas, K., Fakhfouri, A., Barghamadi, M., Musameh, M. M., Best, A. S., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b03285 · Cited by 163
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.072 · Cited by 160
Rational Design of Cathode Structure for High Rate Performance Lithium–Sulfur Batteries
Chen, H., Wang, C., Dai, Y., Qiu, S., Yang, J., Lu, W., & Chen, L. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01837 · Cited by 159
Ma, Z., Li, Z., Hu, K., Liu, D., Huo, J., & Wang, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.139 · Cited by 155
Wang, S.-H., Hou, S., Kuo, P., & Teng, H. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4019115 · Cited by 151
Insight into lithium–metal anodes in lithium–sulfur batteries with a fluorinated ether electrolyte
Zu, C., Azimi, N., Zhang, Z., & Manthiram, A. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03195h · Cited by 150
Effect of the Anion Activity on the Stability of Li Metal Anodes in Lithium‐Sulfur Batteries
Cao, R., Chen, J., Han, K. S., Xu, W., Mei, D., Bhattacharya, P., Engelhard, M., Mueller, K. T., Liu, J., & Zhang, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505074 · Cited by 149
Niu, S., Lv, W. Z., Zhang, C., Shi, Y., Zhao, J., Li, B., Yang, Q., & Kang, F. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.122 · Cited by 142
SnO 2 as a high-efficiency polysulfide trap in lithium–sulfur batteries
Liu, J., Yuan, L., Yuan, K., Li, Z., Hao, Z., Xiang, J., & Huang, Y. (2016) · Nanoscale · doi:10.1039/c6nr02345b · Cited by 140
Enhanced cycle performance of a Li–S battery based on a protected lithium anode
Ma, G., Wen, Z., Wang, Q., et al. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04172k · Cited by 139
Enhanced cycle performance of Li–S battery with a polypyrrole functional interlayer
Ma, G., Wen, Z., Jin, J. H., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.057 · Cited by 139
Sulphur back in vogue for batteries
Noorden, R. V. (2013) · Nature · doi:10.1038/498416a · Cited by 136
Zhang, Z., Wang, G., Lai, Y., Li, J., Zhang, Z., & Chen, W. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.067 · Cited by 135
Wu, F., Li, J., Tian, Y., Su, Y., Wang, J., Yang, W. J., Li, N., Chen, S., & Bao, L. (2015) · Scientific Reports · doi:10.1038/srep13340 · Cited by 132
Wang, J., Yang, Y., & Kang, F. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.04.055 · Cited by 129
Xiong, S., Xie, K., Blomberg, E., Jacobsson, P., & Matic, A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.119 · Cited by 127
Chen, Z. J., Xue, T., & Lee, J. (2012) · RSC Advances · doi:10.1039/c2ra21772d · Cited by 125
Zhang, J., Cai, Y., Zhong, Q., Lai, D., & Yao, J. (2015) · Nanoscale · doi:10.1039/c5nr04768d · Cited by 122
Chemical routes toward long-lasting lithium/sulfur cells
Liu, M., Ye, F., Li, W., Li, H., & Zhang, Y. (2016) · Nano Research · doi:10.1007/s12274-016-1027-8 · Cited by 120
Infiltrated Porous Polymer Sheets as Free‐Standing Flexible Lithium‐Sulfur Battery Electrodes
Wu, F., Zhao, E., Gordon, D., Xiao, Y., Hu, C., & Yushin, G. N. (2016) · Advanced Materials · doi:10.1002/adma.201600757 · Cited by 112
Barghamadi, M., Best, A. S., Bhatt, A. I., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.150 · Cited by 110
Dong, Y., Liu, S., Wang, Z., Liu, Y., Zhao, Z., & Qiu, J. (2015) · Nanoscale · doi:10.1039/c5nr01015b · Cited by 107
Hou, Y., Li, J., Gao, X., Wen, Z., Yuan, C. Y., & Chen, J. (2016) · Nanoscale · doi:10.1039/c5nr09037g · Cited by 100
Xu, H., Qie, L., & Manthiram, A. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.05.028 · Cited by 100
Wang, L., & Byon, H. R. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.068 · Cited by 97
Long-Chain Polysulfide Retention at the Cathode of Li–S Batteries
Kamphaus, E. P., & Balbuena, P. B. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b12538 · Cited by 97
Estimation of energy density of Li-S batteries with liquid and solid electrolytes
Li, C., Zhang, H., Otaegui, L., Singh, G., Armand, M. B., & Rodrı́guez-Martı́nez, L. M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.06.109 · Cited by 94
Xiao, S., Liu, S., Zhang, J., & Wang, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.05.048 · Cited by 87
Niu, S., Lv, W. Z., Zhang, C., Li, F., Tang, L., He, Y., Li, B., Yang, Q., & Kang, F. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05324b · Cited by 87
He, G., Mandlmeier, B., Schuster, J., Nazar, L. F., & Bein, T. (2014) · Chemistry of Materials · doi:10.1021/cm403740r · Cited by 85
Krause, A., Dörfler, S., Piwko, M., Wisser, F. M., Jaumann, T., Ahrens, E., Giebeler, L., Althues, H., Schädlich, S., Grothe, J., et al. (2016) · Scientific Reports · doi:10.1038/srep27982 · Cited by 85
A dual coaxial nanocable sulfur composite for high-rate lithium–sulfur batteries
Li, Z., Yuan, L., Yi, Z., et al. (2013) · Nanoscale · doi:10.1039/c3nr04347a · Cited by 82
High performance lithium-sulfur batteries with a facile and effective dual functional separator
Hao, Z., Yuan, L., Li, Z., Liu, J., Xiang, J., Wu, C., Zeng, R., & Huang, Y. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.03.166 · Cited by 78
Gu, M., Lee, J., Kim, Y., Kim, J. S., Jang, B. Y., Lee, K. T., & Kim, B. (2014) · RSC Advances · doi:10.1039/c4ra09718a · Cited by 77
Werner, J. G., Johnson, S. S., Vijay, V., & Wiesner, U. B. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00500 · Cited by 75
Chloride‐Reinforced Carbon Nanofiber Host as Effective Polysulfide Traps in Lithium–Sulfur Batteries
Fan, L., Zhuang, H. L., Zhang, K., Cooper, V. R., Li, Q., & Lü, Y. (2016) · Advanced Science · doi:10.1002/advs.201600175 · Cited by 74
Self-citationAhn, W., Seo, M. H., Jun, Y., Lee, D. U., Hassan, F. M. B., Wang, X., Yu, A., & Chen, Z. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10267 · Cited by 72
Moon, S., Jung, Y. H., & Kim, D. K. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.011 · Cited by 70
Wang, Q., Wen, Z., Yang, J., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.109 · Cited by 70
Kuratani, K., Okuno, K., Iwaki, T., et al. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.09.001 · Cited by 66
Yao, M., Okuno, K., Iwaki, T., Awazu, T., & Sakai, T. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.10.014 · Cited by 64
Wang, M., Zhang, H., Zhou, W., Yang, X., Li, X., & Zhang, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08999a · Cited by 63
Hierarchical TiO2 spheres as highly efficient polysulfide host for lithium-sulfur batteries
Yang, Z.-Z., Wang, H., Lu, L., Wang, C., Zhong, X., Jin-guo, W., & Jiang, Q. (2016) · Scientific Reports · doi:10.1038/srep22990 · Cited by 60
A lithium-ion sulfur battery using a polymer, polysulfide-added membrane
Agostini, M., & Hassoun, J. (2015) · Scientific Reports · doi:10.1038/srep07591 · Cited by 58
Kim, J., Yoo, D., Min, J., Shakoor, R. A., Kahraman, R., & Choi, J. W. (2015) · ChemNanoMat · doi:10.1002/cnma.201500055 · Cited by 54
Yin-chuan, L., Mi, R., Li, S., Liu, X., Ren, W., Liu, H., Mei, J., & Lau, W. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.04.047 · Cited by 48
Zhang, S., Zheng, M., Lin, Z., Zang, R., Huang, Q., Xue, H., Cao, J., & Pang, H. (2016) · RSC Advances · doi:10.1039/c6ra05560e · Cited by 48
Fabrication of a nano-Li + -channel interlayer for high performance Li–S battery application
Yan, N. J., Yang, X., Zhou, W., Zhang, H., Li, X., & Zhang, H. (2015) · RSC Advances · doi:10.1039/c5ra01269d · Cited by 32
Diao, Y., Xie, K., Hong, X., & Xiong, S. (2013) · 化学学报 · doi:10.6023/a12121024 · Cited by 28
A ternary sulphonium composite Cu3BiS3/S as cathode materials for lithium–sulfur batteries
Gao, X., Wang, Y., Ma, Z., Jiang, W., Zou, Y., & Lu, C. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-9816-8 · Cited by 26
Erhardt, C., Sörgel, Ş., Meinhard, S., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.037 · Cited by 22
Zhang, W., Lin, C., Cong, S., Hou, J., Liu, B., Geng, F., Jin, J., Wu, M., & Zhao, Z. (2016) · RSC Advances · doi:10.1039/c5ra27635g · Cited by 21
Self-assembled peptides for coating of active sulfur nanoparticles in lithium–sulfur battery
Jewel, Y., Yoo, K., Liu, J., & Dutta, P. (2016) · Journal of Nanoparticle Research · doi:10.1007/s11051-016-3364-7 · Cited by 13
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
Ionic liquids and derived materials for lithium and sodium batteries
Yang, Q., Zhang, Z., Sun, X.-G., Hu, Y.-S., Xing, H., & Dai, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00464h · Cited by 601
Nanostructured energy materials for electrochemical energy conversion and storage: A review
Zhang, X., Cheng, X., & Zhang, Q. (2016) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2016.11.003 · Cited by 516
Metadata
- Authors
- Kang, W., Deng, N., Ju, J., Li, Q., Wu, D., Ma, X., Li, L., Naebe, M., & Cheng, B.
- Venue
- Nanoscale
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2016
- Volume
- 8
- Issue
- 37
- Pages
- 16541-16588
- ISSN
- 2040-3364 (ISSN-L)
- 2040-3372
- OpenAlex
- W2507616561
- Cited by
- 391
- References
- 192
- FWCI
- 25.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.