The DOI matches its Crossref record; 100 of the 100 references it cites were found in a registry or an index.
Review Article: Stress in thin films and coatings: Current status, challenges, and prospects
Open accessAbstract
The issue of stress in thin films and functional coatings is a persistent problem in materials science and technology that has congregated many efforts, both from experimental and fundamental points of view, to get a better understanding on how to deal with, how to tailor, and how to manage stress in many areas of applications. With the miniaturization of device components, the quest for increasingly complex film architectures and multiphase systems and the continuous demands for enhanced performance, there is a need toward the reliable assessment of stress on a submicron scale from spatially resolved techniques. Also, the stress evolution during film and coating synthesis using physical vapor deposition (PVD), chemical vapor deposition, plasma enhanced chemical vapor deposition (PECVD), and related processes is the result of many interrelated factors and competing stress sources so that the task to provide a unified picture and a comprehensive model from the vast amount of stress data remains very challenging. This article summarizes the recent advances, challenges, and prospects of both fundamental and applied aspects of stress in thin films and engineering coatings and systems, based on recent achievements presented during the 2016 Stress Workshop entitled “Stress Evolution in Thin Films and Coatings: from Fundamental Understanding to Control.” Evaluation methods, implying wafer curvature, x-ray diffraction, or focused ion beam removal techniques, are reviewed. Selected examples of stress evolution in elemental and alloyed systems, graded layers, and multilayer-stacks as well as amorphous films deposited using a variety of PVD and PECVD techniques are highlighted. Based on mechanisms uncovered by in situ and real-time diagnostics, a kinetic model is outlined that is capable of reproducing the dependence of intrinsic (growth) stress on the grain size, growth rate, and deposited energy. The problems and solutions related to stress in the context of optical coatings, inorganic coatings on plastic substrates, and tribological coatings for aerospace applications are critically examined. This review also suggests strategies to mitigate excessive stress levels from novel coating synthesis perspectives to microstructural design approaches, including the ability to empower crack-based fabrication processes, pathways leading to stress relaxation and compensation, as well as management of the film and coating growth conditions with respect to energetic ion bombardment. Future opportunities and challenges for stress engineering and stress modeling are considered and outlined.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Elastic Behaviour of a Crystalline Aggregate
Hill, R. (1952) · Proceedings of the Physical Society. Section A · doi:10.1088/0370-1298/65/5/307 · Cited by 11,503
Reuss, A. (1929) · ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik · doi:10.1002/zamm.19290090104 · Cited by 6,338
Surface Studies of Solids by Total Reflection of X-Rays
Parratt, L. G. (1954) · Physical Review · doi:10.1103/physrev.95.359 · Cited by 5,188
The tension of metallic films deposited by electrolysis
Stoney, G. G. (1909) · Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1909.0021 · Cited by 4,872
Mixed Mode Cracking in Layered Materials
Hutchinson, J. W., & Suo, Z. (1991) · Advances in Applied Mechanics · doi:10.1016/s0065-2156(08)70164-9 · Cited by 4,011
Deformation Potentials and Mobilities in Non-Polar Crystals
Bardeen, J., & Shockley, W. (1950) · Physical Review · doi:10.1103/physrev.80.72 · Cited by 3,881
Analysis of Bi-Metal Thermostats
Timoshenko, S. (1925) · Journal of the Optical Society of America · doi:10.1364/josa.11.000233 · Cited by 2,426
Piezoresistance Effect in Germanium and Silicon
Smith, C. S. (1954) · Physical Review · doi:10.1103/physrev.94.42 · Cited by 2,036
Microstructural evolution during film growth
Petrov, I., Barna, P. B., Hultman, L., & Greene, J. E. (2003) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.1601610 · Cited by 1,787
Soukoulis, C. M., & Wegener, M. (2011) · Nature Photonics · doi:10.1038/nphoton.2011.154 · Cited by 1,703
Stretchable and Foldable Silicon Integrated Circuits
Kim, D.-H., Ahn, J.-H., Choi, W. M., Kim, H.-S., Kim, T.-H., Song, J., Huang, Y. Y., Liu, Z., Lu, C., & Rogers, J. A. (2008) · Science · doi:10.1126/science.1154367 · Cited by 1,676
FinFET-a self-aligned double-gate MOSFET scalable to 20 nm
Hu, C., Bokor, J., King, T.-J., Anderson, E., Kuo, C., Asano, K., Takeuchi, H., Kedzierski, J., Lee, W.-C., & Hisamoto, D. (2000) · IEEE Transactions on Electron Devices · doi:10.1109/16.887014 · Cited by 1,660
The microstructure of sputter‐deposited coatings
Thornton, J. A. (1986) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.573628 · Cited by 1,336
Stress-related effects in thin films
Thornton, J. A., & Hoffman, D. W. (1989) · Thin Solid Films · doi:10.1016/0040-6090(89)90030-8 · Cited by 1,172
The wear of metals under unlubricated conditions
Archard, J. F., & Hirst, W. (1956) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1956.0144 · Cited by 1,100
A novel pulsed magnetron sputter technique utilizing very high target power densities
Kouznetsov, V., Macák, K., Schneider, J. M., Helmersson, U., & Petrov, I. (1999) · Surface and Coatings Technology · doi:10.1016/s0257-8972(99)00292-3 · Cited by 1,080
High power pulsed magnetron sputtering: A review on scientific and engineering state of the art
Sarakinos, K., Alami, J., & Konstantinidis, S. (2010) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2009.11.013 · Cited by 1,075
A structure zone diagram including plasma-based deposition and ion etching
Anders, A. (2010) · Thin Solid Films · doi:10.1016/j.tsf.2009.10.145 · Cited by 980
Revised structure zone model for thin film physical structure
Messier, R., Giri, A. P., & Roy, R. A. (1984) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.572604 · Cited by 968
Lee, M. L., Fitzgerald, E. A., Bulsara, M. T., Currie, M. T., & Lochtefeld, A. (2005) · Journal of Applied Physics · doi:10.1063/1.1819976 · Cited by 966
Surface and interface stress effects in thin films
Cammarata, R. C. (1994) · Progress in Surface Science · doi:10.1016/0079-6816(94)90005-1 · Cited by 950
A simple model for the formation of compressive stress in thin films by ion bombardment
Davis, C. A. (1993) · Thin Solid Films · doi:10.1016/0040-6090(93)90201-y · Cited by 820
Janssen, G. C. A. M., Abdalla, M. M., van Keulen, F., Pujada, B. R., & van Venrooy, B. (2009) · Thin Solid Films · doi:10.1016/j.tsf.2008.07.014 · Cited by 710
Intrinsic stress in sputter-deposited thin films
Windischmann, H. (1992) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408439208244586 · Cited by 662
Crystallite coalescence: A mechanism for intrinsic tensile stresses in thin films
Nix, W. D., & Clemens, B. M. (1999) · Journal of Materials Research · doi:10.1557/jmr.1999.0468 · Cited by 661
Stresses and deformation processes in thin films on substrates
Doerner, M. F., & Nix, W. D. (1988) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408438808243734 · Cited by 617
Plasma deposition of optical films and coatings: A review
Martinu, L., & Poitras, D. (2000) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.1314395 · Cited by 559
Self-citationInterfaces and stresses in thin films
Spaepen, F. (2000) · Acta Materialia · doi:10.1016/s1359-6454(99)00286-4 · Cited by 531
The correlation between mechanical stress and magnetic anisotropy in ultrathin films
Sander, D. (1999) · Reports on Progress in Physics · doi:10.1088/0034-4885/62/5/204 · Cited by 516
Thin-Film Permeation-Barrier Technology for Flexible Organic Light-Emitting Devices
Lewis, J. S., & Weaver, M. S. (2004) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2004.824072 · Cited by 505
Origin of Compressive Residual Stress in Polycrystalline Thin Films
Chason, E., Sheldon, B. W., Freund, L. B., Floro, J. A., & Hearne, S. J. (2002) · Physical Review Letters · doi:10.1103/physrevlett.88.156103 · Cited by 483
Self-citationStresses in thin films: The relevance of grain boundaries and impurities
Hoffman, R. W. (1976) · Thin Solid Films · doi:10.1016/0040-6090(76)90453-3 · Cited by 479
Nanoscale holographic interferometry for strain measurements in electronic devices
Hÿtch, M., Houdellier, F., Hue, F., & Snoeck, E. (2008) · Nature · doi:10.1038/nature07049 · Cited by 472
The intrinsic stress of polycrystalline and epitaxial thin metal films
Koch, R. (1994) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/6/45/005 · Cited by 451
Tutorial: Reactive high power impulse magnetron sputtering (R-HiPIMS)
Anders, A. (2017) · Journal of Applied Physics · doi:10.1063/1.4978350 · Cited by 424
Mechanisms of reversible stretchability of thin metal films on elastomeric substrates
Lacour, S. P., Chan, D., Wagner, S., Li, T., & Suo, Z. (2006) · Applied Physics Letters · doi:10.1063/1.2201874 · Cited by 413
Floro, J. A., Hearne, S. J., Hunter, J. A., Kotula, P., Chason, E., Seel, S. C., & Thompson, C. V. (2001) · Journal of Applied Physics · doi:10.1063/1.1352563 · Cited by 357
Self-citationA methodology for determining mechanical properties of freestanding thin films and MEMS materials
Espinosa, H. D., Prorok, B. C., & Fischer, M. (2003) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(02)00062-5 · Cited by 336
Grain Growth and Stress Relief in Thin Films
Chaudhari, P. (1972) · Journal of Vacuum Science and Technology · doi:10.1116/1.1316674 · Cited by 317
Note on the origin of intrinsic stresses in films deposited via evaporation and sputtering
D'Heurle, F. M., & Harper, J. M. E. (1989) · Thin Solid Films · doi:10.1016/0040-6090(89)90035-7 · Cited by 298
Aluminum films deposited by rf sputtering
D’Heurle, F. M. (1970) · Metallurgical Transactions · doi:10.1007/bf02811600 · Cited by 277
Internal stresses in Cr, Mo, Ta, and Pt films deposited by sputtering from a planar magnetron source
Hoffman, D. W., & Thornton, J. A. (1982) · Journal of Vacuum Science and Technology · doi:10.1116/1.571463 · Cited by 257
Measurement of fracture toughness by nanoindentation methods: Recent advances and future challenges
Sebastiani, M., Johanns, K. E., Herbert, E. G., & Pharr, G. M. (2015) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2015.04.003 · Cited by 243
Self-citationMeasurements of stress during vapor deposition of copper and silver thin films and multilayers
Shull, A. L., & Spaepen, F. (1996) · Journal of Applied Physics · doi:10.1063/1.363701 · Cited by 233
Chason, E., & Guduru, P. R. (2016) · Journal of Applied Physics · doi:10.1063/1.4949263 · Cited by 223
Self-citationThe metal flux from a rotating cylindrical magnetron: a Monte Carlo simulation
Van Aeken, K., Mahieu, S., & Depla, D. (2008) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/41/20/205307 · Cited by 210
Model for stress generated upon contact of neighboring islands on the surface of a substrate
Freund, L. B., & Chason, E. (2001) · Journal of Applied Physics · doi:10.1063/1.1359437 · Cited by 206
Self-citationMechanical stresses in (sub)monolayer epitaxial films
Schell-Sorokin, A., & Tromp, R. (1990) · Physical Review Letters · doi:10.1103/physrevlett.64.1039 · Cited by 198
Direct Mapping of Strain in a Strained Silicon Transistor by High-Resolution Electron Microscopy
Hue, F., Hÿtch, M., Bender, H., Houdellier, F., & Claverie, A. (2008) · Physical Review Letters · doi:10.1103/physrevlett.100.156602 · Cited by 193
Monaghan, D., Teer, D. G., Logan, P., Efeoğlu, İ., & Arnell, R. D. (1993) · Surface and Coatings Technology · doi:10.1016/0257-8972(93)90146-f · Cited by 182
A novel pillar indentation splitting test for measuring fracture toughness of thin ceramic coatings
Sebastiani, M., Johanns, K. E., Herbert, E. G., Carassiti, F., & Pharr, G. M. (2014) · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786435.2014.913110 · Cited by 178
Self-citationGrain growth and complex stress evolution during Volmer–Weber growth of polycrystalline thin films
Yu, H. Z., & Thompson, C. V. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.12.031 · Cited by 171
A kinetic analysis of residual stress evolution in polycrystalline thin films
Chason, E. (2012) · Thin Solid Films · doi:10.1016/j.tsf.2012.11.001 · Cited by 170
Self-citationA review of metal-ion-flux-controlled growth of metastable TiAlN by HIPIMS/DCMS co-sputtering
Greczyński, G., Lu, J., Jensen, J., et al. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.01.055 · Cited by 164
Mechanical stresses upon crystallization in phase change materials
Pedersen, T. P. L., Kalb, J., Njoroge, W. K., Wamwangi, D., Wuttig, M., & Spaepen, F. A. (2001) · Applied Physics Letters · doi:10.1063/1.1415419 · Cited by 164
Compressive Stress in Polycrystalline Volmer-Weber Films
Koch, R., Hu, D., & Das, A. K. (2005) · Physical Review Letters · doi:10.1103/physrevlett.94.146101 · Cited by 160
Investigation of the amorphous-to-crystalline transition in Mo/Si multilayers
Bajt, S., Stearns, D. G., & Kearney, P. A. (2001) · Journal of Applied Physics · doi:10.1063/1.1381559 · Cited by 152
Bilek, M., & McKenzie, D. R. (2005) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2005.02.161 · Cited by 150
Thin film deposition: fundamentals and modeling
Gilmer, G. H., Huang, H., & Roland, C. (1998) · Computational Materials Science · doi:10.1016/s0927-0256(98)00022-6 · Cited by 135
Kinetic Model for Dependence of Thin Film Stress on Growth Rate, Temperature, and Microstructure
Chason, E., Shin, J. W., Hearne, S. J., & Freund, L. B. (2012) · Journal of Applied Physics · doi:10.1063/1.4704683 · Cited by 134
Self-citationStress in Evaporated and Sputtered Thin Films – A Comparison
Koch, R. (2009) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2009.09.047 · Cited by 126
Reversible stress changes at all stages of Volmer–Weber film growth
Friesen, C., Seel, S. C., & Thompson, C. V. (2004) · Journal of Applied Physics · doi:10.1063/1.1637728 · Cited by 124
Critical ion energy and ion flux in the growth of films by plasma-enhanced chemical-vapor deposition
Martinu, L., Klemberg-Sapieha, J. E., Küttel, O. M., Raveh, A., & Wertheimer, M. R. (1994) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.579322 · Cited by 121
Self-citationAng, K., Chui, K.-J., Bliznetsov, V. N., Tung, C., Du, A., Balasubramanian, N., Samudra, G. S., Li, M. F., & Yeo, Y. (2005) · Applied Physics Letters · doi:10.1063/1.1871351 · Cited by 117
Lunt, A. J. G., & Korsunsky, A. M. (2015) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2015.10.049 · Cited by 109
Origins of residual stress in thin films: Interaction between microstructure and growth kinetics
Engwall, A. M., Rao, Z., & Chason, E. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.089 · Cited by 105
Self-citationMarx, V. M., Tóth, F., Wiesinger, A., Berger, J., Kirchlechner, C., Cordill, M. J., Fischer, F. D., Rammerstorfer, F. G., & Dehm, G. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.01.047 · Cited by 98
Self-Replicating Cracks: A Collaborative Fracture Mode in Thin Films
Marthelot, J., Roman, B., Bico, J., Teisseire, J., Dalmas, D., & Melo, F. (2014) · Physical Review Letters · doi:10.1103/physrevlett.113.085502 · Cited by 94
Atom insertion into grain boundaries and stress generation in physically vapor deposited films
Magnfält, D., Abadias, G., & Sarakinos, K. (2013) · Applied Physics Letters · doi:10.1063/1.4817669 · Cited by 90
Self-citationA Kinetic Model for Stress Generation in Thin Films Grown from Energetic Vapor Fluxes
Chason, E., Karlson, M., Colin, J. J., Magnfält, D., Sarakinos, K., & Abadias, G. (2016) · Journal of Applied Physics · doi:10.1063/1.4946039 · Cited by 90
Self-citationGreczyński, G., Lu, J., Jensen, J., et al. (2014) · Thin Solid Films · doi:10.1016/j.tsf.2014.01.017 · Cited by 83
Abadias, G., Simonot, L., Colin, J., Michel, A., Camelio, S., & Babonneau, D. (2015) · Applied Physics Letters · doi:10.1063/1.4935034 · Cited by 82
Self-citationEnhanced Proton Conductivity in Y‐Doped BaZrO 3 via Strain Engineering
Fluri, A., Marcolongo, A., Владимирович, Р. В., Wokaun, A. J., Pergolesi, D., Marzari, N., & Lippert, T. K. (2017) · Advanced Science · doi:10.1002/advs.201700467 · Cited by 75
Çetinörgü, E., Baloukas, B., Zabeida, O., Klemberg-Sapieha, J. E., & Martinu, L. (2009) · Applied Optics · doi:10.1364/ao.48.004536 · Cited by 74
Self-citationCracking-assisted fabrication of nanoscale patterns for micro/nanotechnological applications
Kim, M., Kim, D.-J., Ha, D., & Kim, T. (2015) · Nanoscale · doi:10.1039/c5nr06266g · Cited by 73
Fillon, A., Abadias, G., Michel, A., et al. (2010) · Thin Solid Films · doi:10.1016/j.tsf.2010.07.091 · Cited by 66
Self-citationLunt, A. J. G., Baimpas, N., Salvati, E., Dolbnya, I. P., Sui, T., Ying, S., Zhang, H., Kleppe, A., Dluhoš, J., & Korsunsky, A. M. (2015) · The Journal of Strain Analysis for Engineering Design · doi:10.1177/0309324715596700 · Cited by 65
Leib, J., Mönig, R., & Thompson, C. V. (2009) · Physical Review Letters · doi:10.1103/physrevlett.102.256101 · Cited by 63
Abadias, G., Fillon, A., Colin, J., et al. (2013) · Vacuum · doi:10.1016/j.vacuum.2013.07.041 · Cited by 61
Self-citationMagnfält, D., Fillon, A., Boyd, R. D., Helmersson, U., Sarakinos, K., & Abadias, G. (2016) · Journal of Applied Physics · doi:10.1063/1.4941271 · Cited by 60
Self-citationDebelle, A., Abadias, G., Michel, A., et al. (2004) · Applied Physics Letters · doi:10.1063/1.1763637 · Cited by 58
Self-citationMechanical characteristics of optical coatings prepared by various techniques: a comparative study
Klemberg-Sapieha, J. E., Oberste-Berghaus, J., Martinu, L., Blacker, R. S., Stevenson, I., Sadkhin, G., Morton, D. E., McEldowney, S. C., Klinger, R. E., Martin, P. J., et al. (2004) · Applied Optics · doi:10.1364/ao.43.002670 · Cited by 54
Self-citationEpitaxial growth of Cu(001) thin films onto Si(001) using a single-step HiPIMS process
Cemin, F., Lundin, D., Furgeaud, C., Michel, A., Amiard, G., Minea, T. M., & Abadias, G. (2017) · Scientific Reports · doi:10.1038/s41598-017-01755-8 · Cited by 52
Self-citationReactive HiPIMS Deposition of SiO2/Ta2O5 Optical Interference Filters
Hála, M., Vernhes, R., Zabeida, O., Klemberg-Sapieha, J.-E., & Martinu, L. (2014) · Journal of Applied Physics · doi:10.1063/1.4903285 · Cited by 51
Self-citationGeorgi, C., Hecker, M., & Zschech, E. (2007) · Journal of Applied Physics · doi:10.1063/1.2743882 · Cited by 42
Influence of Phase Transformation on Stress Evolution during Growth of Metal Thin Films on Silicon
Fillon, A., Abadias, G., Michel, A., et al. (2010) · Physical Review Letters · doi:10.1103/physrevlett.104.096101 · Cited by 41
Self-citationYu, H. Z., & Thompson, C. V. (2014) · Applied Physics Letters · doi:10.1063/1.4871214 · Cited by 40
Fast and slow stress evolution mechanisms during interruptions of Volmer-Weber growth
Yu, H. Z., Leib, J., Boles, S. T., & Thompson, C. V. (2014) · Journal of Applied Physics · doi:10.1063/1.4863600 · Cited by 37
(2017) · Wiley eBooks · doi:10.1002/9783527684489 · Cited by 36
Djaziri, S., Renault, P.-O., Bourhis, É. L., Goudeau, P., Faurie, D., Géandier, G., Mocuta, C., & Thiaudière, D. (2014) · Journal of Applied Physics · doi:10.1063/1.4894616 · Cited by 35
Growth and properties of high index Ta2O5 optical coatings prepared by HiPIMS and other methods
Hála, M., Vernhes, R., Zabeida, O., Bousser, É., Klemberg-Sapieha, J. E., Sargent, R. B., & Martinu, L. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.08.024 · Cited by 28
Self-citationBrovko, O. O., Бажанов, Д. И., Meyerheim, H. L., Sander, D., Stepanyuk, V. S., & Kirschner, J. (2014) · Surface Science Reports · doi:10.1016/j.surfrep.2014.08.001 · Cited by 28
Role of atomic migration in nanocrystalline stability: Grain size and thin film stress states
Kapoor, M., & Thompson, G. B. (2014) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2014.11.001 · Cited by 26
Self-citationGrowth of patterned island arrays to identify origins of thin film stress
Chason, E., Shin, J.-W., Chen, C.-H., Engwall, A. M., Miller, C., Hearne, S., & Freund, L. B. (2014) · Journal of Applied Physics · doi:10.1063/1.4870051 · Cited by 26
Self-citationEffects of oblique-angle deposition on intrinsic stress evolution during polycrystalline film growth
Yu, H. Z., & Thompson, C. V. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.05.060 · Cited by 23
Phase stability and in situ growth stresses in Ti/Nb thin films
Wan, L., Yu, X.-X., & Thompson, G. B. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.07.046 · Cited by 20
Self-citationMarthelot, J., Bico, J., Melo, F., & Roman, B. (2015) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2015.07.010 · Cited by 19
Yu, H. Z., & Thompson, C. V. (2014) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.4902957 · Cited by 18
Stress evolution during growth of 1-D island arrays: Kinetics and length scaling
Chason, E., Engwall, A. M., Miller, C., Chen, C.-H., Bhandari, A., Soni, S. K., Hearne, S., Freund, L. B., & Sheldon, B. W. (2014) · Scripta Materialia · doi:10.1016/j.scriptamat.2014.10.012 · Cited by 16
Self-citationTi segregation in regulating the stress and microstructure evolution in W-Ti nanocrystalline films
Kaub, T., & Thompson, G. B. (2017) · Journal of Applied Physics · doi:10.1063/1.4991880 · Cited by 14
Self-citation
Cited by
The fundamentals and applications of ferroelectric HfO2
Schroeder, U., Park, M. H., Mikolajick, T., & Hwang, C. S. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00431-2 · Cited by 710
Recent Progress on Wear‐Resistant Materials: Designs, Properties, and Applications
Zhai, W., Bai, L., Zhou, R., Fan, X., Kang, G., Liu, Y., & Zhou, K. (2021) · Advanced Science · doi:10.1002/advs.202003739 · Cited by 651
Metadata
- Authors
- Abadias, G., Chason, E., Keckes, J., Sebastiani, M., Thompson, G. B., Barthel, E., Doll, G. L., Murray, C. E., Stoessel, C. H., & Martinu, L.
- Venue
- Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
- Publisher
- American Vacuum Society
- Published
- 2018-03-01
- Volume
- 36
- Issue
- 2
- ISSN
- 0734-2101 (ISSN-L)
- 1520-8559
- OpenAlex
- W2789517172
- Cited by
- 858
- References
- 100
- FWCI
- 45.24
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.