The DOI matches its Crossref record; 141 of the 141 references it cites were found in a registry or an index.
3D Bioprinting of Human Tissues: Biofabrication, Bioinks, and Bioreactors
Open accessAbstract
The field of tissue engineering has progressed tremendously over the past few decades in its ability to fabricate functional tissue substitutes for regenerative medicine and pharmaceutical research. Conventional scaffold-based approaches are limited in their capacity to produce constructs with the functionality and complexity of native tissue. Three-dimensional (3D) bioprinting offers exciting prospects for scaffolds fabrication, as it allows precise placement of cells, biochemical factors, and biomaterials in a layer-by-layer process. Compared with traditional scaffold fabrication approaches, 3D bioprinting is better to mimic the complex microstructures of biological tissues and accurately control the distribution of cells. Here, we describe recent technological advances in bio-fabrication focusing on 3D bioprinting processes for tissue engineering from data processing to bioprinting, mainly inkjet, laser, and extrusion-based technique. We then review the associated bioink formulation for 3D bioprinting of human tissues, including biomaterials, cells, and growth factors selection. The key bioink properties for successful bioprinting of human tissue were summarized. After bioprinting, the cells are generally devoid of any exposure to fluid mechanical cues, such as fluid shear stress, tension, and compression, which are crucial for tissue development and function in health and disease. The bioreactor can serve as a simulator to aid in the development of engineering human tissues from in vitro maturation of 3D cell-laden scaffolds. We then describe some of the most common bioreactors found in the engineering of several functional tissues, such as bone, cartilage, and cardiovascular applications. In the end, we conclude with a brief insight into present limitations and future developments on the application of 3D bioprinting and bioreactor systems for engineering human tissue.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Neer, R. M., Arnaud, C. D., Zanchetta, J. R., Prince, R., Gaich, G. A., Reginster, J.-Y., Hodsman, A. B., Eriksen, E. F., Ish-Shalom, S., Genant, H. K., et al. (2001) · New England Journal of Medicine · doi:10.1056/nejm200105103441904 · Cited by 4,602
Bhatia, S. N., & Ingber, D. E. (2014) · Nature Biotechnology · doi:10.1038/nbt.2989 · Cited by 3,305
The third dimension bridges the gap between cell culture and live tissue
Pampaloni, F., Reynaud, E. G., & Stelzer, E. H. K. (2007) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm2236 · Cited by 2,817
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00240-x · Cited by 1,962
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901 · cited 2×
“[27] for detailed information about how rheological properties and crosslinking mechanisms affect 3D bioprinting processes and structure fidelity.”
BackgroundIsolation of amniotic stem cell lines with potential for therapy
De Coppi, P., Bartsch, G., Siddiqui, M. M., Xu, T., Santos, C. C., Perin, L., Mostoslavsky, G., Serre, A. C., Snyder, E. Y., Yoo, J. J., et al. (2007) · Nature Biotechnology · doi:10.1038/nbt1274 · Cited by 1,869
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528 · cited 2×
“The gelation processes of bioink will sometimes include several crosslinking mechanisms to print stable and complex scaffolds [65,66].”
BackgroundRecombinant human bone morphogenetic protein induces bone formation.
Wang, E. A., Rosen, V, D'Alessandro, J. S., Bauduy, M., Cordes, P., Harada, T., Israel, D. I., Hewick, R. M., Kerns, K. M., & LaPan, P. (1990) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.87.6.2220 · Cited by 1,523
Cellular and molecular mechanisms of bone remodeling
Raggatt, L. J., & Partridge, N. C. (2010) · Journal of Biological Chemistry · doi:10.1074/jbc.r109.041087 · Cited by 1,402
Lee, K., Silva, E. A., & Mooney, D. J. (2011) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0223 · Cited by 1,386
Organ printing: computer-aided jet-based 3D tissue engineering
Mironov, V., Boland, T., Trusk, T., Forgacs, G., & Markwald, R. R. (2003) · Trends in Biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,276
The role of bioreactors in tissue engineering
Martin, I., Wendt, D., & Heberer, M. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2003.12.001 · Cited by 1,215
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015 · cited 1×
“According to the wide variety of hydrogels that have been bioprinted, there are three different crosslinking mechanisms: chemical (ion compound [60], pH [61]), physical (temperature [62], light [63]), and enzymatic [64] crosslinking.”
BackgroundOsteogenesis and angiogenesis: The potential for engineering bone
Bone & Joint Research Group, C. F. H. D., Kanczler, J., & Oreffo, R. (2008) · European Cells and Materials · doi:10.22203/ecm.v015a08 · Cited by 987
Mauck, R. L., Soltz, M. A., Wang, C. C. B., Wong, D. D., Chao, P.-H. G., Valhmu, W. B., Hung, C. T., & Ateshian, G. A. (2000) · Journal of Biomechanical Engineering · doi:10.1115/1.429656 · Cited by 976
Frost, H. M. (1990) · The Anatomical Record · doi:10.1002/ar.1092260402 · Cited by 956
ENGINEERING PRINCIPLES OF CLINICAL CELL-BASED TISSUE ENGINEERING
MUSCHLER, G. F., NAKAMOTO, C., & GRIFFITH, L. G. (2004) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200407000-00029 · Cited by 878
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Inspiration and application in the evolution of biomaterials
Huebsch, N., & Mooney, D. J. (2009) · Nature · doi:10.1038/nature08601 · Cited by 855
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Guillotin, B., Souquet, A., Catros, S., Duocastella, M., Pippenger, B., Bellance, S., Bareille, R., Rémy, M., Bordenave, L., Amédée, J., et al. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.055 · Cited by 832
Adult mesenchymal stem cells and cell-based tissue engineering.
Tuan, R. S., Boland, G. M., & Tuli, R. (2003) · Arthritis Research · doi:10.1186/ar614 · Cited by 798
Schuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 790
A decade of progress in tissue engineering
Khademhosseini, A., & Langer, R. (2016) · Nature Protocols · doi:10.1038/nprot.2016.123 · Cited by 747
Aguado, B. A., Mulyasasmita, W., Su, J., Lampe, K. J., & Heilshorn, S. C. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0391 · Cited by 719
Inkjet printing for high-throughput cell patterning
Roth, E. A., Xu, T., Das, M., Gregory, C., Hickman, J. J., & Boland, T. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.052 · Cited by 714
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & D'Lima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 686
Metal deposition from a supported metal film using an excimer laser
Bohandy, J., Kim, B. F., & Adrian, F. J. (1986) · Journal of Applied Physics · doi:10.1063/1.337287 · Cited by 686
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
3D Bioprinting for Tissue and Organ Fabrication
Zhang, Y. S., Yue, K., Aleman, J., Mollazadeh-Moghaddam, K., Bakht, S. M., Yang, J., Jia, W., Dell’Erba, V., Assawes, P., Shin, S. R., et al. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1612-8 · Cited by 682
Strategies for controlled delivery of growth factors and cells for bone regeneration
Vo, T. N., Kasper, F. K., & Mikos, A. G. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.01.016 · Cited by 666
Biofabrication of bone tissue: approaches, challenges and translation for bone regeneration
Tang, D., Tare, R. S., Yang, L.-Y., Williams, D. F., Ou, K.-L., & Oreffo, R. O. C. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.024 · Cited by 613
Xu, T., Zhao, W., Zhu, J.-M., Albanna, M. Z., Yoo, J. J., & Atala, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.035 · Cited by 607
Das, S., Pati, F., Choi, Y.-J., Rijal, G., Shim, J.-H., Kim, S. W., Ray, A. R., Cho, D.-W., & Ghosh, S. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.023 · Cited by 553
Ouyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 524
Viability and electrophysiology of neural cell structures generated by the inkjet printing method
Xu, T., Gregory, C. A., Molnar, P., Cui, X., Jalota, S., Bhaduri, S. B., & Boland, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.048 · Cited by 520
Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 410
3D printing of composite tissue with complex shape applied to ear regeneration
Lee, J.-S., Hong, J. M., Jung, J. W., Shim, J.-H., Oh, J.-H., & Cho, D.-W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024103 · Cited by 407
Fedorovich, N. E., Schuurman, W., Wijnberg, H. M., Prins, H.-J., van Weeren, P. R., Malda, J., Alblas, J., & Dhert, W. J. A. (2012) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0060 · Cited by 403
Döring, A., Birnbaum, W., & Kuckling, D. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60031a · Cited by 391
Delivery of bone morphogenetic proteins for orthopedic tissue regeneration
Seeherman, H., & Wozney, J. M. (2005) · Cytokine & Growth Factor Reviews · doi:10.1016/j.cytogfr.2005.05.001 · Cited by 389
Sikavitsas, V. I., Bancroft, G. N., & Mikos, A. G. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10150 · Cited by 388
Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers
Levato, R., Visser, J., Planell, J. A., Engel, E., Malda, J., & Mateos-Timoneda, M. A. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035020 · Cited by 380
Shim, J.-H., Lee, J.-S., Kim, J. Y., & Cho, D.-W. (2012) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/22/8/085014 · Cited by 379
Nguyen, D. G., Funk, J., Robbins, J. B., Crogan-Grundy, C., Presnell, S. C., Singer, T., & Roth, A. B. (2016) · PLOS ONE · doi:10.1371/journal.pone.0158674 · Cited by 379
Mesenchymal stem cell ingrowth and differentiation on coralline hydroxyapatite scaffolds
Mygind, T., Stiehler, M., Baatrup, A., Li, H., Zou, X., Flyvbjerg, A., Kassem, M., & Bünger, C. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.10.003 · Cited by 378
Three-Dimensional BioAssembly Tool for Generating Viable Tissue-Engineered Constructs
Smith, C. M., Stone, A. L., Parkhill, R. L., Stewart, R. L., Simpkins, M. W., Kachurin, A. M., Warren, W. L., & Williams, S. K. (2004) · Tissue Engineering · doi:10.1089/1076327042500274 · Cited by 373
Inkjet printing biomaterials for tissue engineering: bioprinting
Saunders, R. E., & Derby, B. (2014) · International Materials Reviews · doi:10.1179/1743280414y.0000000040 · Cited by 365
Phillippi, J. A., Miller, E., Weiss, L., Huard, J., Waggoner, A., & Campbell, P. (2008) · Stem Cells · doi:10.1634/stemcells.2007-0520 · Cited by 361
Wüst, S., Godla, M. E., Müller, R., & Hofmann, S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.016 · Cited by 357
Self-citationGao, G., Schilling, A. F., Yonezawa, T., Wang, J., Dai, G., & Cui, X. (2014) · Biotechnology Journal · doi:10.1002/biot.201400305 · Cited by 351
Bioprinting scale-up tissue and organ constructs for transplantation
Ozbolat, I. T. (2015) · Trends in Biotechnology · doi:10.1016/j.tibtech.2015.04.005 · Cited by 350
Engineering functionally graded tissue engineering scaffolds
Leong, K. F., Chua, C. K., Sudarmadji, N., & Yeong, W. Y. (2008) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2007.11.002 · Cited by 346
Gao, G., Schilling, A. F., Hubbell, K., Yonezawa, T., Truong, D., Hong, Y., Dai, G., & Cui, X. (2015) · Biotechnology Letters · doi:10.1007/s10529-015-1921-2 · Cited by 341
Finite element study of scaffold architecture design and culture conditions for tissue engineering
Olivares, A. L., Marsal, È., Planell, J. A., & Lacroix, D. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.041 · Cited by 339
Vascular Biology and the Skeleton
Brandi, M. L., & Collin-Osdoby, P. (2006) · Journal of Bone and Mineral Research · doi:10.1359/jbmr.050917 · Cited by 338
Zhang, J., Zhao, S., Zhu, M., Zhu, Y., Zhang, Y., Liu, Z., & Zhang, C. (2014) · J. Mater. Chem. B · doi:10.1039/c4tb01063a · Cited by 317
Self-citationZhang, J., Zhao, S., Zhu, Y., Huang, Y., Zhu, M., Tao, C., & Zhang, C. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.01.001 · Cited by 311
Self-citation3D Bioprinting of Tissue/Organ Models
Pati, F., Gantelius, J., & Svahn, H. A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201505062 · Cited by 301
Laser Printing of Pluripotent Embryonal Carcinoma Cells
Ringeisen, B. R., Kim, H., Barron, J. A., Krizman, D. B., Chrisey, D. B., Jackman, S., Auyeung, R. Y. C., & Spargo, B. J. (2004) · Tissue Engineering · doi:10.1089/107632704323061843 · Cited by 295
Laser Printing of Stem Cells for Biofabrication of Scaffold-Free Autologous Grafts
Gruene, M., Deiwick, A., Koch, L., Schlie, S., Unger, C., Hofmann, N., Bernemann, I., Glasmacher, B., & Chichkov, B. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2010.0359 · Cited by 286
Keriquel, V., Guillemot, F., Arnault, I., Guillotin, B., Miraux, S., Amédée, J., Fricain, J.-C., & Catros, S. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014101 · Cited by 280
3D Bioprinting of Developmentally Inspired Templates for Whole Bone Organ Engineering
Daly, A. C., Cunniffe, G. M., Sathy, B. N., Jeon, O., Alsberg, E., & Kelly, D. J. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600182 · Cited by 272
Science in three dimensions: The print revolution
Jones, N. (2012) · Nature · doi:10.1038/487022a · Cited by 249
Biofabrication of a three-dimensional liver micro-organ as an in vitro drug metabolism model
Chang, R., Emami, K., Wu, H., & Sun, W. (2010) · Biofabrication · doi:10.1088/1758-5082/2/4/045004 · Cited by 247
Inkjet printing of macromolecules on hydrogels to steer neural stem cell differentiation
Ilkhanizadeh, S., Teixeira, A. I., & Hermanson, O. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.05.018 · Cited by 246
Catros, S., Fricain, J.-C., Guillotin, B., Pippenger, B., Bareille, R., Remy, M., Lebraud, E., Desbat, B., Amédée, J., & Guillemot, F. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025001 · Cited by 245
Progress in material design for biomedical applications
Tibbitt, M. W., Rodell, C. B., Burdick, J. A., & Anseth, K. S. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1516247112 · Cited by 242
Effects of growth factors and cytokines on osteoblast differentiation
Hughes, F. J., Turner, W., Belibasakis, G., & Martuscelli, G. (2006) · Periodontology 2000 · doi:10.1111/j.1600-0757.2006.00161.x · Cited by 233
Biofabrication of Cell‐Loaded 3D Spider Silk Constructs
Schacht, K., Jüngst, T., Schweinlin, M., Ewald, A., Groll, J., & Scheibel, T. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409846 · Cited by 232
Controlled Positioning of Cells in Biomaterials—Approaches Towards 3D Tissue Printing
Wüst, S., Müller, R., & Hofmann, S. (2011) · Journal of Functional Biomaterials · doi:10.3390/jfb2030119 · Cited by 231
Self-citationDuarte Campos, D. F., Blaeser, A., Korsten, A., Neuss, S., Jäkel, J., Vogt, M., & Fischer, H. (2015) · Tissue Engineering Part A · doi:10.1089/ten.tea.2014.0231 · Cited by 229
Terraciano, V., Hwang, N., Moroni, L., Park, H. B., Zhang, Z., Mizrahi, J., Seliktar, D., & Elisseeff, J. (2007) · Stem Cells · doi:10.1634/stemcells.2007-0228 · Cited by 229
Bioprinting Complex Cartilaginous Structures with Clinically Compliant Biomaterials
Kesti, M., Eberhardt, C., Pagliccia, G., Kenkel, D., Grande, D., Boss, A., & Zenobi‐Wong, M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503423 · Cited by 228
Gruene, M., Pflaum, M., Hess, C., Diamantouros, S., Schlie, S., Deiwick, A., Koch, L., Wilhelmi, M., Jockenhoevel, S., Haverich, A., et al. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0185 · Cited by 227
Duarte Campos, D. F., Blaeser, A., Weber, M., Jäkel, J., Neuss, S., Jahnen-Dechent, W., & Fischer, H. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015003 · Cited by 224
DNA deposition through laser induced forward transfer
Colina, M., Serra, P., Fernández-Pradas, J. M., Sevilla, L., & Morenza, J. L. (2005) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2004.08.047 · Cited by 217
Madry, H., Kaul, G., Cucchiarini, M., Stein, U., Zurakowski, D., Remberger, K., Menger, M. D., Kohn, D., & Trippel, S. B. (2005) · Gene Therapy · doi:10.1038/sj.gt.3302515 · Cited by 216
Park, J. Y., Choi, J.-C., Shim, J.-H., Lee, J.-S., Park, H., Kim, S. W., Doh, J., & Cho, D.-W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035004 · Cited by 213
Fabrication and characterization of bio-engineered cardiac pseudo tissues
Xu, T., Baicu, C., Aho, M., Zile, M., & Boland, T. (2009) · Biofabrication · doi:10.1088/1758-5082/1/3/035001 · Cited by 211
Stiehler, M., Bünger, C., Baatrup, A., Lind, M., Kassem, M., & Mygind, T. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31967 · Cited by 207
McKay Orthopaedic Research Laboratory, D. O. O. S., Huang, A., Farrell, M., Kim, M., & Mauck, R. (2010) · European Cells and Materials · doi:10.22203/ecm.v019a08 · Cited by 201
Neufurth, M., Wang, X., Schröder, H. C., Feng, Q., Diehl-Seifert, B., Ziebart, T., Steffen, R., Wang, S., & Müller, W. E. G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.07.002 · Cited by 185
Cui, H., Zhu, W., Nowicki, M., Zhou, X., Khademhosseini, A., & Zhang, L. G. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600505 · Cited by 185
Additive manufacturing for in situ repair of osteochondral defects
Cohen, D. L., Lipton, J. I., Bonassar, L. J., & Lipson, H. (2010) · Biofabrication · doi:10.1088/1758-5082/2/3/035004 · Cited by 169
A novel bioprinting method and system for forming hybrid tissue engineering constructs
Shanjani, Y., Pan, C. C., Elomaa, L., & Yang, Y. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045008 · Cited by 169
Zhang, J., Wehrle, E., Adamek, P., Paul, G. R., Qin, X.-H., Rubert, M., & Müller, R. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.07.016 · Cited by 169
Self-citationZhang, J., Eyisoylu, H., Qin, X.-H., Rubert, M., & Müller, R. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.12.026 · Cited by 169
Self-citationLee, H. J., Kim, Y. B., Ahn, S. H., Lee, J., Jang, C. H., Yoon, H., Chun, W., & Kim, G. H. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500193 · Cited by 158
Yoon, H. H., Bhang, S. H., Shin, J., Shin, J., & Kim, B. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0647 · Cited by 156
3D bioprinting of BMSC-laden methacrylamide gelatin scaffolds with CBD-BMP2-collagen microfibers
Du, M., Chen, B., Meng, Q., Liu, S., Zheng, X., Zhang, C., Wang, H., Li, H., Wang, N., & Dai, J. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044104 · Cited by 152
The fluid dynamic and shear environment in the NASA/JSC rotating-wall perfused-vessel bioreactor
Begley, C. M., & Kleis, S. J. (2000) · Biotechnology and Bioengineering · doi:10.1002/1097-0290(20001005)70:1<32::aid-bit5>3.0.co;2-v · Cited by 149
Directed Three-Dimensional Patterning of Self-Assembled Peptide Fibrils
Dinca, V. C., Kasotakis, E., Catherine, J., Mourka, A., Ranella, A., Ovsianikov, A., Chichkov, B. N., Farsari, M., Mitraki, A., & Fotakis, C. (2007) · Nano Letters · doi:10.1021/nl072798r · Cited by 148
Novel anisotropic engineered cardiac tissues: Studies of electrical propagation
Bursac, N., Loo, Y., Leong, K. W., & Tung, L. (2007) · Biochemical and Biophysical Research Communications · doi:10.1016/j.bbrc.2007.07.138 · Cited by 135
Guo, X., Park, H., Liu, G., Liu, W., Cao, Y., Tabata, Y., Kasper, F. K., & Mikos, A. G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.01.048 · Cited by 128
Distinct Tissue Formation by Heterogeneous Printing of Osteo- and Endothelial Progenitor Cells
Fedorovich, N. E., Wijnberg, H. M., Dhert, W. J. A., & Alblas, J. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0019 · Cited by 128
BMSCs-laden gelatin/sodium alginate/carboxymethyl chitosan hydrogel for 3D bioprinting
Huang, J., Fu, H., Wang, Z., Meng, Q., Liu, S., Wang, H., Zheng, X., Dai, J., & Zhang, Z. (2016) · RSC Advances · doi:10.1039/c6ra24231f · Cited by 128
Soluble osteogenic molecular signals and the induction of bone formation
Ripamonti, U. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.09.021 · Cited by 127
Biophysical stimulation of bone fracture repair, regeneration and remodelling.
Chao, E., & Inoue, N. (2003) · European Cells and Materials · doi:10.22203/ecm.v006a07 · Cited by 120
Cui, X., Breitenkamp, K., Lotz, M., & DʼLima, D. D. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24488 · Cited by 120
Bioreactors for tissue engineering: An update
Zhao, J., Griffin, M., Cai, J. W., Li, S., Bulter, P. E. M., & Kalaskar, D. M. (2016) · Biochemical Engineering Journal · doi:10.1016/j.bej.2016.01.018 · Cited by 117
Layer-by-Layer Tissue Microfabrication Supports Cell Proliferation In Vitro and In Vivo
Catros, S., Guillemot, F., Nandakumar, A., Ziane, S., Moroni, L., Habibović, P., van Blitterswijk, C., Rousseau, B., Chassande, O., Amédée, J., et al. (2011) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2011.0382 · Cited by 113
Fedorovich, N. E., Kuipers, E., Gawlitta, D., Dhert, W. J. A., & Alblas, J. (2011) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0001 · Cited by 109
Accelerated myotube formation using bioprinting technology for biosensor applications
Cui, X., Gao, G., & Qiu, Y. (2012) · Biotechnology Letters · doi:10.1007/s10529-012-1087-0 · Cited by 109
Engineering spatial control of multiple differentiation fates within a stem cell population
Ker, D. F. E., Chu, B., Phillippi, J. A., Gharaibeh, B., Huard, J., Weiss, L. E., & Campbell, P. G. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.036 · Cited by 108
Henriksson, I., Gatenholm, P., & Hägg, D. A. (2017) · Biofabrication · doi:10.1088/1758-5090/aa5c1c · Cited by 107
Skardal, A., Sarker, S. F., Crabbé, A., Nickerson, C. A., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.07.047 · Cited by 100
Buwalda, S. J., Dijkstra, P. J., Calucci, L., Forte, C., & Feijén, J. (2009) · Biomacromolecules · doi:10.1021/bm901080d · Cited by 98
Sittichokechaiwut, A., Scutt, A. M., Ryan, A. J., Bonewald, L. F., & Reilly, G. C. (2009) · Bone · doi:10.1016/j.bone.2008.12.027 · Cited by 97
Fedorovich, N. E., Haverslag, R. T., Dhert, W. J. A., & Alblas, J. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0603 · Cited by 94
Advancing Tissue Engineering: A Tale of Nano‐, Micro‐, and Macroscale Integration
Leijten, J., Rouwkema, J., Zhang, Y. S., Nasajpour, A., Dokmeci, M. R., & Khademhosseini, A. (2015) · Small · doi:10.1002/smll.201501798 · Cited by 85
Bioreactor based engineering of large-scale human cartilage grafts for joint resurfacing
Santoro, R., Olivares, A. L., Brans, G., Wirz, D., Longinotti, C., Lacroix, D., Martín, I., & Wendt, D. J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.08.009 · Cited by 83
Lu, C.-H., Yeh, T.-S., Yeh, C., Fang, Y.-H. D., Sung, L., Lin, S.-Y., Yen, T., Chang, Y.-H., & Hu, Y.-C. (2013) · Molecular Therapy · doi:10.1038/mt.2013.165 · Cited by 81
Vetsch, J. R., Betts, D. C. T. N., Müller, R., & Hofmann, S. (2017) · PLoS ONE · doi:10.1371/journal.pone.0180781 · Cited by 79
Self-citationZhang, J., Wehrle, E., Vetsch, J. R., Paul, G. R., Rubert, M., & Müller, R. (2019) · Biomedical Materials · doi:10.1088/1748-605x/ab3c74 · Cited by 76
Self-citationLaser microfabrication of hydroxyapatite‐osteoblast‐like cell composites
Doraiswamy, A., Narayan, R. J., Harris, M. L., Qadri, S. B., Modi, R., & Chrisey, D. B. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30969 · Cited by 74
Inkjet printing and cell seeding thermoreversible photocurable gel structures
Biase, M. D., Saunders, R., Tirelli, N., & Derby, B. (2011) · Soft Matter · doi:10.1039/c0sm00996b · Cited by 71
Cigan, A. D., Roach, B. L., Nims, R. J., Tan, A. R., Albro, M. B., Stoker, A. M., Cook, J. L., Vunjak‐Novakovic, G., Hung, C. T., & Ateshian, G. A. (2016) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2016.04.039 · Cited by 70
Schmidt, O., Mizrahi, J., Elisseeff, J. H., & Seliktar, D. (2006) · Biotechnology and Bioengineering · doi:10.1002/bit.21072 · Cited by 57
Ahn, S. H., Lee, H. J., Lee, J., Yoon, H. Y., Chun, W., & Kim, G. (2015) · Scientific Reports · doi:10.1038/srep13427 · Cited by 56
Kim, Y. B., Lee, H., Yang, G. H., Choi, C. H., Lee, D., Hwang, H., Jung, W., Yoon, H. Y., & Kim, G. (2015) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2015.09.044 · Cited by 55
Ahn, S., Lee, H., Lee, E. J., & Kim, G. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00139g · Cited by 49
The evolution of simulation techniques for dynamic bone tissue engineering in bioreactors
Vetsch, J. R., Müller, R., & Hofmann, S. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1733 · Cited by 47
Self-citationKempen, D. H. R., Lu, L., Hefferan, T. E., Creemers, L. B., Heijink, A., Maran, A., Dhert, W. J. A., & Yaszemski, M. J. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2010.0173 · Cited by 43
Rapid prototyping of tubular polyurethane and cell/hydrogel constructs
He, K., & Wang, X. (2011) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911511412553 · Cited by 38
Cultures of human liver cells in simulated microgravity environment
Yoffe, B., Darlington, G., Soriano, H. E., Krishnan, B., Risin, D., Pellis, N. R., & Khaoustov, V. I. (1999) · Advances in Space Research · doi:10.1016/s0273-1177(99)00079-4 · Cited by 38
THREE-DIMENSIONAL ADIPOSE TISSUE MODEL USING LOW SHEAR BIOREACTORS
Frye, C., & Patrick, C. (2006) · In Vitro Cellular & Developmental Biology - Animal · doi:10.1290/0509055.1 · Cited by 35
A MSCs-laden polycaprolactone/collagen scaffold for bone tissue regeneration
Jang, C. H., Ahn, S. H., Yang, G. H., & Kim, G. (2016) · RSC Advances · doi:10.1039/c5ra20627h · Cited by 29
Song, K., Liu, T., Li, X., Cui, Z.-F., Sun, X.-Y., & Ma, X. (2007) · PubMed · Cited by 27
Vetsch, J. R., Müller, R., & Hofmann, S. (2016) · Journal of The Royal Society Interface · doi:10.1098/rsif.2016.0425 · Cited by 27
Self-citationThe osteoinductive potential of printable, cell‐laden hydrogel‐ceramic composites
Fedorovich, N. E., Leeuwenburgh, S. C. G., van der Helm, Y. J. M., Alblas, J., & Dhert, W. J. A. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34171 · Cited by 26
A depth dependent transversely isotropic micromechanic model of articular cartilage
Elhamian, S. M. M., Alizadeh, M., Shokrieh, M. M., & Karimi, A. (2015) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-015-5449-8 · Cited by 15
Cited by
Lu, P., Ruan, D., Huang, M., Tian, M., Zhu, K., Gan, Z., & Xiao, Z. (2024) · Signal Transduction and Targeted Therapy · doi:10.1038/s41392-024-01852-x · Cited by 667
Metadata
- Authors
- Zhang, J., Wehrle, E., Rubert, M., & Müller, R.
- Venue
- International Journal of Molecular Sciences
- Publisher
- MDPI AG
- Published
- 2021-04-12
- Volume
- 22
- Issue
- 8
- Pages
- 3971
- ISSN
- 1422-0067 (ISSN-L)
- OpenAlex
- W3156721378
- Cited by
- 257
- References
- 141
- FWCI
- 10.15
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.