The DOI matches its Crossref record; 119 of the 124 references it cites were found in a registry or an index; 41 of the 162 sources its claims cite were checked for support.
Transforming Plastic Waste into Value: A Review of Management Strategies and Innovative Applications in Sustainable Construction
Open accessAbstract
The world is facing the issue of managing a huge amount of plastic waste. To prevent uncontrolled and unproductive disposal, various valorization strategies have been developed. Recycling plastic waste into valuable composites for construction offers a promising pathway toward sustainable waste management. Given that the construction industry is a major consumer of energy and natural resources, it presents a key opportunity for integrating recycled materials. This review examines diverse strategies and applications for plastic waste recycling, with a particular focus on sustainable construction solutions, while also evaluating the advantages and limitations of this approach. Within this context, recycled plastic waste can be used as a filler to replace non-renewable natural resources. Studies have shown that incorporating plastic waste as a filler improves diverse properties of composites, including thermal and sound insulation. In particular, thermoset plastic waste exhibits desirable characteristics such as rigidity, heat and chemical resistance, strength and durability, making it suitable as a filler for non-structural applications. Alternatively, melting recycled plastic waste can produce binder materials that combine with other inorganic materials to form building and construction composites. Using melted thermoplastic waste as a binder enhances ductility, reduces water absorption, and improves overall durability. Additionally, the hot-pressing technique has been shown to be more effective in addressing poor bonding issues commonly encountered with conventional methods.
Overview
CoChat Summary
TL;DR
This review synthesizes strategies for valorizing plastic waste, especially recycled thermoplastics and thermosets, as fillers or binders in sustainable construction composites. It argues that recycled plastic can reduce sand consumption and improve thermal/acoustic insulation, but mechanical strength, fire resistance, durability, and environmental/health risks require case-by-case evaluation and further research.
Key findings
- Global petroleum-based plastic production rose from 1.7 million tons in 1950 to 367 million tons in 2020; of 9.2 billion tons produced between 1950 and 2017, about 7 billion tons became waste, with only 9–15% managed and around 80% landfilled or released into the environment.
- The estimated minimum lifetime cost of plastic produced in 2019 was about USD 3716 billion, ten times its market price, and is projected to double by 2040 without intervention; GHG emissions from plastic amounted to more than USD 171 billion in 2019, and plastic contributed 1.8 billion metric tons of GHG emissions annually (3.4% of global GHG emissions).
- In construction, recycled plastic waste can replace non-renewable sand: a 10% volume replacement ratio could reduce sand consumption by 820 million tons annually. As filler, increasing plastic content generally lowers mechanical properties and fire resistance while reducing weight; as binder, optimal plastic content is recommended at 45–65% of total mass, with compressive strength of 5–18 MPa and splitting tensile strength of 1–5 MPa in one mortar study.
- Recycled plastic composites can improve thermal and acoustic insulation: replacing 25% of sand with PVC waste decreased thermal conductivity by 65%, and doubling the replacement led to a 73% reduction; a 50% PET substitution for sand was associated with a 57% reduction in sound velocity. Wastewater applications reported 99% removal of 500-nanometer beads, 91% methylene blue removal over 10 reuse cycles, and 99% lead removal within 5 min at 30 °C.
Methods
- Narrative review of existing literature on plastic waste classification, environmental and socioeconomic impacts, management strategies, recycling/valorization methods, and applications in construction, wastewater treatment, textiles, soil stabilization, and other sectors.
- Synthesizes experimental studies, reports from UNEP, WWF/Dalberg, and other cited sources, with figures and tables summarizing plastic types, recycling pathways, composite properties, and pros/cons.
- No systematic search strategy, inclusion criteria, or meta-analysis is described in the provided text.
Limitations
- The paper states that further research, including Life Cycle Assessment (LCA), is essential to address mechanical performance, fire resistance, long-term durability, and environmental impact throughout the material’s lifecycle.
- It also lists environmental and economic issues: long-term performance under extreme weather and acidic/saline conditions; degradation releasing additives and microplastics; health risks from fumes during heating/melting; variability and impurities in plastic feedstock; and energy-intensive, costly processing and pretreatment.
- Evident from the text: the review does not describe a systematic literature search or quality appraisal, so its conclusions rely on selected cited studies rather than a reproducible synthesis.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures
![Figure 9 Recycled plastic waste in construction sector [93].](https://figures.cochat.ai/paper-figures/dce8287d6f9c4ad48edea72cfdd68c41/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-9.jpg)
![Figure 1 Schematic structure and some properties of thermoplastics, elastomers, and thermosets: thermoplastics exhibit only weak intermolecular forces between polymer chains, while thermosets possess additional cross-linking [16,21].](https://figures.cochat.ai/paper-figures/b15847ff6b814e00a5e81a8ddc4ea046/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-1.jpg)
![Figure 2 End-use markets for plastics by application (2022, in the EU27 + 3) [26].](https://figures.cochat.ai/paper-figures/1917af71a2304a2d8ee24a69be155a3c/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-2.jpg)
![Figure 3 Duration of degradation of some plastic items [31].](https://figures.cochat.ai/paper-figures/6971021b5f004f3bb299b27df5061155/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-3.jpg)
![Figure 4 Costs imposed by the plastic lifecycle [42].](https://figures.cochat.ai/paper-figures/a9da1fb1c50646f08ccc1c355b3b2fd6/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-4.jpg)
![Figure 5 Lifetime cost of plastic produced in 2019 [42].](https://figures.cochat.ai/paper-figures/30023b9c0a384a62a09f1ff8f95e61d4/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-5.jpg)
![Figure 6 Major steps followed in plastic recycling [25].](https://figures.cochat.ai/paper-figures/d59ec67335c94a089e0252af3815d810/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-6.jpg)
![Figure 7 Schematic representation of plastic-waste-recycling methods: mechanical and chemical [52].](https://figures.cochat.ai/paper-figures/82adb5258cbd4ff0846228e6412cce3a/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-7.jpg)
![Figure 8 Main advantages and limitations of different recycling methods [22,52].](https://figures.cochat.ai/paper-figures/8d20943eb5614cf8b4cb45445ecad5c6/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-8.jpg)

![Figure 11 SEM images of plastic aggregates and cement paste: (a) interfacial transition zone (ITZ), (b) magnified area, (c) reference concrete. Image reproduced with permission from [100]. Copyright Elsevier 2020.](https://figures.cochat.ai/paper-figures/12664d9e4ad44d61a953771305925540/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-11.jpg)
![Figure 12 SEM image showing debonding of plastic particles from the surrounding matrix at failure. Image reproduced with permission form ref. [102] Copyright Elsevier 2018.](https://figures.cochat.ai/paper-figures/5ab9e2317aac44c9b8b712c149b58bea/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-12.jpg)
![Figure 13 Fire behavior of mortar with 50% PVC plastic after 60 s, 300 s, and after the removal of the flame. Image reproduced with permission from [112]. Copyright Elsevier 2018.](https://figures.cochat.ai/paper-figures/029feef6124a40b2ad2d5bb30ea43984/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-13.jpg)
![Figure 14 SEM images: sample with 60% plastic (magnified 30× (left image) and 100× (right image)). Image adapted from [117]. Copyright Elsevier 2021.](https://figures.cochat.ai/paper-figures/9c12afc6cbc6469a9667253e5f47960c/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-14.jpg)
![Figure 15 SEM observations of hardened cement paste under various compaction pressures. Image reproduced with permission from [120]. Copyright J-Stage 2016.](https://figures.cochat.ai/paper-figures/0b8f1745659241dfa8696e535b5712a4/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-15.jpg)
![Figure 16 SEM image (magnification 2000×) of compacted plastic concrete (25% plastic to concrete ratio). Images reproduced with permission from [96]. Copyright Elsevier 2021.](https://figures.cochat.ai/paper-figures/35e3a8487ee14ce493387759daf2512c/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-16.jpg)
![Figure 17 Graph showing the evolution of bending strength of compacted concrete with increasing melted plastic content (black) [96] and compressive strength of recycled plastic waste units (blue) [123].](https://figures.cochat.ai/paper-figures/ae9802af0209474eb814d0bd2f581601/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-17.jpg)
![Figure 18 Evolution of water absorption with plastic content, case of recycled plastic waste units (RPW) [123], and compacted plastic concrete (CPC) [96].](https://figures.cochat.ai/paper-figures/42eb780798b249febd966deb872adbc3/transforming-plastic-waste-into-value-a-review-of-management-strategies-and-figure-18.jpg)
Verification
Claims the paper makes
38 Valid · 7 Not valid · 100 Not checked · 28 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“Specifically, pollutants such as heavy metals and volatile organic compounds (VOCs) may be released during the manufacturing of the composites, posing occupational health risks if proper safety measures are not implemented.”
§ Transforming Plastic Waste into Value: A Review of Management Strategies and Innovative Applications in Sustainable Construction > 1. Introduction
What the sources say
- Supportedcites [12] Swinnerton, 2024, The manufacturing process and consequent occupational health and environmental risks associated with the use of plastic waste in construction bricks in small-scale recycling plants, J. Clean. Prod. source
The Results and discussion section on potential occupational health hazards identifies heavy-metal exposure during plastic collection and sorting and VOC generation during melting. The same section recommends protective equipment and emission controls to reduce workers’ health risks. It notes that risks at existing plastic-brick operations have not yet been directly studied, consistent with the claim’s cautious wording. (LLM, conf=0.91)
hedgedstates a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Factors like chemical composition, molecular weight, surface-area-to-volume ratio, and functional groups (which determine hydrophilicity or hydrophobicity) influence degradation rates [32].”
§ Transforming Plastic Waste into Value: A Review of Management Strategies and Innovative Applications in Sustainable Construction > 3. Environmental Impacts of Plastic Waste
What the sources say
- Supportedcites [32] Dimassi, 2022, Degradation-fragmentation of marine plastic waste and their environmental implications: A critical review, Arab. J. Chem. source
The Introduction identifies functional-group types, molecular mass, and polymer characteristics as factors influencing degradation. Section 3.1 links polymer composition and molecular weight to degradation rates, while Section 3.2 says a larger surface-to-volume ratio makes degradation faster. Section 3.1 also identifies hydrophobicity as influential. (LLM, conf=0.90)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Fortunately, the majority of polymeric waste, consisting of synthetic polymers such as polystyrene (PS), polyamides (PA), poly(lactic acid) (PLA), and acrylonitrile butadiene styrene (ABS), can be readily transformed into micro/nanofibers using the electrospinning technique [60,61].”
§ Transforming Plastic Waste into Value: A Review of Management Strategies and Innovative Applications in Sustainable Construction > 7. Potential Applications of Plastic Waste > 7.2. Application in Wastewater Treatment
What the sources say
- Partly supportedcites [60] Li, X., Peng, Y., Deng, Y., Ye, F., Zhang, C., Hu, X., Liu, Y., and Zhang, D. (2022). Recycling and Reutilizing Polymer Waste via Electrospun Micro/Nanofibers: A Review. Nanomaterials, 12. sourceExperimental — accuracy not yet measured
Section 2.1 says most polymeric waste consists of synthetic polymers that can be easily electrospun into micro/nanofibers under appropriate processing conditions, and Sections 3.2–3.4 discuss recycled PS, PA, and ABS. Section 3.4 discusses lactic acid (LA), not poly(lactic acid) (PLA), so the source does not support that example. (LLM, conf=0.88)
- Not checked — no full text of the sourcecites [61] Wang, 2022, Preparation of adsorptive polyethyleneimine/polyvinyl chloride electrospun nanofiber membrane: Characterization and application, J. Environ. Manag. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Within this scenario, the use of various polymer combinations and the contamination by food, metal, paper, pigments, and ink complicates the recycling of polymers [51].”
§ Transforming Plastic Waste into Value: A Review of Management Strategies and Innovative Applications in Sustainable Construction > 5. Plastic Waste Management Strategy
What the sources say
- Supportedcites [51] Kassab, A., Al Nabhani, D., Mohanty, P., Pannier, C., and Ayoub, G.Y. (2023). Advancing Plastic Recycling: Challenges and Opportunities in the Integration of 3D Printing and Distributed Recycling for a Circular Economy. Polymers, 15. source
The Introduction states that combining different polymers and contamination by food particles, metal, paper, pigment, and ink complicate polymer recycling. This directly supports the citing sentence. (LLM, conf=0.95)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“On the other hand, recycling of multi-layer/multi-component products is currently challenging due to the significant cross-contamination between the different materials and polymers [50].”
§ Transforming Plastic Waste into Value: A Review of Management Strategies and Innovative Applications in Sustainable Construction > 5. Plastic Waste Management Strategy
What the sources say
- Supportedcites [50] Alassali, A., Picuno, C., Chong, Z.K., Guo, J., Maletz, R., and Kuchta, K. (2021). Towards Higher Quality of Recycled Plastics: Limitations from the Material’s Perspective. Sustainability, 13. source
Section 3.1, “Product's Designs” (page not provided), states that mechanical recycling of multi-layer and multi-component products is currently limited because of cross-contamination between materials and polymers. This directly supports the citing sentence. (LLM, conf=0.94)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
82 more claims · 22 with their cited sources checked
Create a free account to see all 173 claims and to verify the 1 reference still open.
- It may state two separate claims as one. 65
- Probably not a substantial claim. 38
- The quote only partly states this claim. 2
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Transforming Plastic Waste into Value: A Review of Management Strategies and Innovative Applications in Sustainable Construction > 8. Application of Recycled Plastic Waste in Construction > 8.2. Recycled Plastic Waste as Binder
“the successful formation of plastic concrete was strongly influenced by an optimal molding temperature, which was set below the melting point of the plastic material.”
§ Transforming Plastic Waste into Value: A Review of Management Strategies and Innovative Applications in Sustainable Construction > 8. Application of Recycled Plastic Waste in Construction > 8.2. Recycled Plastic Waste as Binder
“Under the conditions of high temperature and high pressure, the plastic melted and then smoothly filled the empty spaces; therefore, hot-pressing was used to eliminate the poor bonding associated with the conventional method [96].”
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Accumulation and fragmentation of plastic debris in global environments
Barnes, D. K. A., Galgani, F., Thompson, R. C., & Barlaz, M. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0205 · Cited by 6,126
Degradation rates of plastics in the environment
Chamas, A., Moon, H., Zheng, J., Qiu, Y., Tabassum, T., Jang, J. H., Abu-Omar, M., Scott, S. L., & Suh, S. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06635 · Cited by 3,463
Plastics Recycling: Challenges and Opportunities
Hopewell, J., Dvorak, R., & Kosior, E. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0311 · Cited by 3,201
Kumar, R., Verma, A., Shome, A., Sinha, R., Sinha, S., Jha, P. K., Kumar, R., Kumar, P., Shubham, Das, S., et al. (2021) · Sustainability · doi:10.3390/su13179963 · Cited by 1,111
Construction and demolition waste management in China through the 3R principle
Huang, B., Wang, X., Kua, H., Geng, Y., Bleischwitz, R., & Ren, J. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.029 · Cited by 1,047
A review on buildings energy information: Trends, end-uses, fuels and drivers
González-Torres, M., Pérez-Lombard, L., Coronel, J. F., Maestre, I. R., & Yan, D. (2022) · Energy Reports · doi:10.1016/j.egyr.2021.11.280 · Cited by 1,036
Plastic Waste: Challenges and Opportunities to Mitigate Pollution and Effective Management
Kibria, M. G., Masuk, N. I., Safayet, R., Nguyen, H. Q., & Mourshed, M. (2023) · International Journal of Environmental Research · doi:10.1007/s41742-023-00507-z · Cited by 884
Shen, M., Huang, W., Chen, M., Song, B., Zeng, G., & Zhang, Y. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120138 · Cited by 870
Plastic waste and its management strategies for environmental sustainability
Evode, N., Qamar, S. A., Bilal, M., Barceló, D., & Iqbal, H. M. N. (2021) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2021.100142 · Cited by 800
Methods for polyurethane and polyurethane composites, recycling and recovery: A review
Zia, K. M., Bhatti, H. N., & Ahmad Bhatti, I. (2007) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2007.05.004 · Cited by 786
Carbon dioxide reduction potential in the global cement industry by 2050
Miller, S. A., John, V. M., Pacca, S. A., & Horvath, A. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.08.026 · Cited by 757
Handbook of Solid Waste Management: Sustainability through Circular Economy
(2020) · Springer eBooks · doi:10.1007/978-981-15-7525-9 · Cited by 739
Use of plastic waste as aggregate in cement mortar and concrete preparation: A review
Saikia, N., & de Brito, J. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.066 · Cited by 709
Jia, X., Qin, C., Friedberger, T., Guan, Z., & Huang, Z. (2016) · Science Advances · doi:10.1126/sciadv.1501591 · Cited by 534
Albano, C., Camacho, N., Hernández, M., Matheus, A., & Gutiérrez, A. (2009) · Waste Management · doi:10.1016/j.wasman.2009.05.007 · Cited by 504
Thermochemical conversion of plastic waste to fuels: A review
Nanda, S., & Berruti, F. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01094-7 · Cited by 383
Zhi, M., Yang, F., Meng, F., Li, M., Manivannan, A., & Wu, N. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500336h · Cited by 359
Wojnowska-Baryła, I., Bernat, K., & Zaborowska, M. (2022) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph192013223 · Cited by 348
Eco-friendly concrete containing recycled plastic as partial replacement for sand
Almeshal, I., Tayeh, B. A., Alyousef, R., Alabduljabbar, H., & Mohamed, A. M. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.02.090 · Cited by 319
Repurposing waste plastics into cleaner asphalt pavement materials: A critical literature review
Wu, S., & Montalvo, L. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124355 · Cited by 310
Performance of structural concrete with recycled plastic waste as a partial replacement for sand
Thorneycroft, J., Orr, J., Savoikar, P., & Ball, R. J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.127 · Cited by 305
Dimassi, S. N., Hahladakis, J. N., Yahia, M. N. D., Ahmad, M. I., Sayadi, S., & Al-Ghouti, M. A. (2022) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2022.104262 · Cited by 286
Engineering Properties of Concrete with Waste Recycled Plastic: A Review
Babafemi, A. J., Šavija, B., Paul, S. C., & Anggraini, V. (2018) · Sustainability · doi:10.3390/su10113875 · Cited by 267
Stabilization of expansive soils for use in construction
Seco, A., Ramírez, F., Miqueleiz, L., & García, B. (2011) · Applied Clay Science · doi:10.1016/j.clay.2010.12.027 · Cited by 262
Ali, N., Khan, M. H., Ali, M., Sidra, Ahmad, S., Khan, A., Nabi, G., Ali, F., Bououdina, M., & Kyzas, G. Z. (2024) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.169489 · Cited by 262
Yao, D., Yang, H., Hu, Q., Chen, Y., Chen, H., & Williams, P. T. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.119413 · Cited by 258
Mechanical and physical properties and morphology of concrete containing plastic waste as aggregate
Belmokaddem, M., Mahi, A., Senhadji, Y., & Pekmezci, B. Y. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119559 · Cited by 256
Recycling of Thermoset Materials and Thermoset-Based Composites: Challenge and Opportunity
Morici, E., & Dintcheva, N. T. (2022) · Polymers · doi:10.3390/polym14194153 · Cited by 245
Naderi Kalali, E., Lotfian, S., Entezar Shabestari, M., Khayatzadeh, S., Zhao, C., & Yazdani Nezhad, H. (2023) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2023.100763 · Cited by 228
Kazemi, M., Faisal Kabir, S., & Fini, E. H. (2021) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2021.105776 · Cited by 221
Sogancioglu, M., Yel, E., & Ahmetli, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.157 · Cited by 198
Gong, J., Liu, J., Chen, X., Jiang, Z., Wen, X., Mijowska, E., & Tang, T. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05118a · Cited by 198
Joseph, B., James, J., Kalarikkal, N., & Thomas, S. (2021) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2021.06.003 · Cited by 195
Mechanical properties of polymer concrete made with recycled PET and recycled concrete aggregates
Jo, B.-W., Park, S.-K., & Park, J.-C. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.10.009 · Cited by 185
Schutter, G. D., & Audenaert, K. (2004) · Materials and Structures · doi:10.1007/bf02483288 · Cited by 184
Concrete containing waste recycled glass, plastic and rubber as sand replacement
Steyn, Z. C., Babafemi, A. J., Fataar, H., & Combrinck, R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121242 · Cited by 175
Recent advances and future technologies in nano-microplastics detection
Nene, A., Sadeghzade, S., Viaroli, S., Yang, W., Uchenna, U. P., Kandwal, A., Liu, X., Somani, P., & Galluzzi, M. (2025) · Environmental Sciences Europe · doi:10.1186/s12302-024-01044-y · Cited by 173
Critical review of global plastics stock and flow data
Wang, C., Liu, Y., Chen, W., Zhu, B., Qu, S., & Xu, M. (2021) · Journal of Industrial Ecology · doi:10.1111/jiec.13125 · Cited by 164
A sustainable application of recycled tyre crumbs as insulator in lightweight cellular concrete
Kashani, A., Ngo, T. D., Mendis, P., Black, J. R., & Hajimohammadi, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.154 · Cited by 163
Recycling of Polyethylene Waste to Produce Plastic Cement
Jassim, A. K. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.02.081 · Cited by 163
Sustainable Solutions Through Innovative Plastic Waste Recycling Technologies
Alaghemandi, M. (2024) · Sustainability · doi:10.3390/su162310401 · Cited by 163
Exploiting recycled plastic waste as an alternative binder for paving blocks production
Agyeman, S., Obeng-Ahenkora, N. K., Assiamah, S., & Twumasi, G. (2019) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2019.e00246 · Cited by 161
Mechanical and thermal properties of lightweight recycled plastic aggregate concrete
Basha, S. I., Ali, M. R., Al-Dulaijan, S. U., & Maslehuddin, M. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101710 · Cited by 158
Evaluation of corn husk fibers reinforced recycled low density polyethylene composites
Youssef, A. M., El-Gendy, A., & Kamel, S. (2015) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2014.12.004 · Cited by 147
Hamada, H. M., Al-Attar, A., Abed, F., Beddu, S. B., Humada, A. M., Majdi, A., Yousif, S. T., & Thomas, B. S. (2024) · Sustainable materials and technologies · doi:10.1016/j.susmat.2024.e00877 · Cited by 145
Plastic Waste Recycling, Applications, and Future Prospects for a Sustainable Environment
Maitlo, G., Ali, I., Maitlo, H. A., Ali, S., Unar, I. N., Ahmad, M. B., Bhutto, D. K., Karmani, R. K., Naich, S. U. R., Sajjad, R. U., et al. (2022) · Sustainability · doi:10.3390/su141811637 · Cited by 143
Recycling of waste PET into useful textile auxiliaries
Shukla, S. R., Harad, A. M., & Jawale, L. S. (2008) · Waste Management · doi:10.1016/j.wasman.2006.11.002 · Cited by 141
Kassab, A., Al Nabhani, D., Mohanty, P., Pannier, C., & Ayoub, G. Y. (2023) · Polymers · doi:10.3390/polym15193881 · Cited by 141
Ma, C., Min, J., Gong, J., Liu, X., Mu, X., Chen, X., & Tang, T. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.126755 · Cited by 138
Gong, J., Michalkiewicz, B., Chen, X., Mijowska, E., Liu, J., Jiang, Z., Wen, X., & Tang, T. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500603h · Cited by 136
Jacob-Vaillancourt, C., & Sorelli, L. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.083 · Cited by 131
Haba, B., Agoudjil, B., Boudenne, A., & Benzarti, K. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.08.025 · Cited by 128
Self-citationRecycled PET Nanofibers for Water Filtration Applications
Zander, N., Gillan, M., & Sweetser, D. (2016) · Materials · doi:10.3390/ma9040247 · Cited by 126
The Unsustainable Use of Sand: Reporting on a Global Problem
(2021) · doi:10.3390/su13063356 · Cited by 124
Producing sustainable concrete with plastic waste: A review
Almohana, A. I., Abdulwahid, M. Y., Galobardes, I., Mushtaq, J., & Almojil, S. F. (2022) · Environmental Challenges · doi:10.1016/j.envc.2022.100626 · Cited by 122
Balu, R., Dutta, N. K., & Roy Choudhury, N. (2022) · Polymers · doi:10.3390/polym14224788 · Cited by 121
From polystyrene waste to porous carbon flake and potential application in supercapacitor
Min, J., Zhang, S., Li, J., Klingeler, R., Wen, X., Chen, X., Zhao, X., Tang, T., & Mijowska, E. (2019) · Waste Management · doi:10.1016/j.wasman.2019.01.002 · Cited by 116
Faisal, F., Rasul, M. G., Jahirul, M. I., & Schaller, D. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.160721 · Cited by 108
Recycling strategies for vitrimers
Zhang, H., Cui, J., Hu, G. W., & Zhang, B. (2022) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2022.2087785 · Cited by 106
Properties of recycled and virgin poly(ethylene terephthalate) blend fibers
Lee, J. H., Lim, K. S., Hahm, W. G., & Kim, S. H. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.38502 · Cited by 97
Ahmad, F., Jamal, A., Mazher, K. M., Umer, W., & Iqbal, M. (2021) · Materials · doi:10.3390/ma15010175 · Cited by 97
Senhadji, Y., Siad, H., Escadeillas, G., Benosman, A. S., Chihaoui, R., Mouli, M., & Lachemi, M. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.070 · Cited by 90
Lee, G., Eui Lee, M., Kim, S.-S., Joh, H.-I., & Lee, S. (2022) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2021.09.026 · Cited by 87
Paving roads with recycled plastics: Microplastic pollution or eco-friendly solution?
Enfrin, M., Myszka, R., & Giustozzi, F. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2022.129334 · Cited by 87
MEMS for biomedical applications
Bhansali, S., & Vasudev, A. (2012) · Woodhead Publishing Limited eBooks · doi:10.1533/9780857096272 · Cited by 84
Recycling of plastic waste materials in the composition of ecological mortars
Aciu, C., Ilutiu-Varvara, D.-A., Manea, D.-L., Orban, Y.-A., & Babota, F. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.03.042 · Cited by 80
Depolymerization of Polypropylene in an Induction-Coupled Plasma (ICP) Reactor
Guddeti, R. R., Knight, R., & Grossmann, E. D. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9906868 · Cited by 79
Effective polyelectrolytes synthesised from expanded polystyrene wastes
Bajdur, W., Pajączkowska, J., Makarucha, B., Sułkowska, A., & Sułkowski, W. W. (2002) · European Polymer Journal · doi:10.1016/s0014-3057(01)00191-4 · Cited by 72
Recycling plastic waste materials for building and construction Materials: A minireview
Nyika, J., & Dinka, M. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.04.226 · Cited by 70
Towards Higher Quality of Recycled Plastics: Limitations from the Material’s Perspective
Alassali, A., Picuno, C., Chong, Z. K., Guo, J., Maletz, R., & Kuchta, K. (2021) · Sustainability · doi:10.3390/su132313266 · Cited by 68
Luminescent carbon dots obtained from polymeric waste
Lauria, A., & Lizundia, E. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121288 · Cited by 67
Cheng, F., Zhang, T., Liu, Y., Zhang, Y., & Qu, J. (2021) · Journal of Xenobiotics · doi:10.3390/jox12010001 · Cited by 66
Yang, Y., Jalalah, M., Alsareii, S. A., Harraz, F. A., Thakur, N., Zheng, Y., Koutb, M., Yoon, Y., & Salama, E.-S. (2024) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2024.112926 · Cited by 65
Soil Stabilization Using Waste Plastic Materials
Kassa, R. B., Workie, T., Abdela, A., Fekade, M., Saleh, M., & Dejene, Y. (2020) · Open Journal of Civil Engineering · doi:10.4236/ojce.2020.101006 · Cited by 62
Abbas, A., Yi, Y. M., Saleem, F., Jin, Z., Veksha, A., Yan, Q., Lisak, G., & Lim, T. M. (2021) · International Journal of Energy Research · doi:10.1002/er.6967 · Cited by 61
Li, X., Wang, J., Yi, G., Teong, S. P., Chan, S. P., & Zhang, Y. (2024) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2023.123378 · Cited by 57
Recycling and Reutilizing Polymer Waste via Electrospun Micro/Nanofibers: A Review
Li, X., Peng, Y., Deng, Y., Ye, F., Zhang, C., Hu, X., Liu, Y., & Zhang, D. (2022) · Nanomaterials · doi:10.3390/nano12101663 · Cited by 53
Polymer carbon dots from plastics waste upcycling
Aji, M. P., Wati, A. L., Priyanto, A., Karunawan, J., Nuryadin, B. W., Wibowo, E., Marwoto, P., & Sulhadi (2018) · Environmental Nanotechnology, Monitoring & Management · doi:10.1016/j.enmm.2018.01.003 · Cited by 49
Chen, Y.-H., Ranganathan, P., Lee, Y.-H., & Rwei, S.-P. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c08242 · Cited by 46
Kareche, A., Agoudjil, B., Haba, B., & Boudenne, A. (2020) · Waste and Biomass Valorization · doi:10.1007/s12649-019-00669-y · Cited by 45
Self-citationWaste polystyrene foam‐graft‐acrylic acid/montmorillonite superabsorbent nanocomposite
Liu, P., Li, L., Zhou, N., Zhang, J., Wei, S., & Shen, J. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25714 · Cited by 45
Suman, T. Y., Li, W.-G., Alif, S., Faris, V. R. P., Amarnath, D. J., Ma, J.-G., & Pei, D.-S. (2020) · Environmental Sciences Europe · doi:10.1186/s12302-020-00388-5 · Cited by 45
Altalhi, T., Kumeria, T., Santos, A., & Losic, D. (2013) · Carbon · doi:10.1016/j.carbon.2013.07.003 · Cited by 39
Goyal, H., Kumar, R., & Mondal, P. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.136857 · Cited by 38
A Review on Gypsum-Based Composites Reinforced With Palm Fibers in Construction Applications
Haba, B., Benali, F., Jawaid, M., & Leão, A. L. (2022) · International Journal of Thermophysics · doi:10.1007/s10765-022-03086-x · Cited by 36
Self-citationRecent Developments in Plastic Recycling
(2021) · Composites science and technology · doi:10.1007/978-981-16-3627-1 · Cited by 36
A technique for purifying wastewater with polymeric flocculantproduced from waste plastic
Bekri-Abbes, I., Bayoudh, S., & Baklouti, M. (2007) · Desalination · doi:10.1016/j.desal.2006.03.540 · Cited by 35
Thiam, M., Fall, M., & Diarra, M. S. (2021) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2021.e00634 · Cited by 35
Hasheminezhad, A., Farina, A., Yang, B., Ceylan, H., Kim, S., Tutumluer, E., & Cetin, B. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.134448 · Cited by 34
Cheng, L. X., Zhang, L., Chen, X. Y., & Zhang, Z. J. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.07.007 · Cited by 33
Recycling of Hardened Cementitious Material by Pressure and Control of Volumetric Change
Sakai, Y., Tarekegne, B. T., & Kishi, T. (2016) · Journal of Advanced Concrete Technology · doi:10.3151/jact.14.47 · Cited by 33
Soil Technology and Engineering Properties of Soils
(1991) · doi:10.1007/978-1-4615-3928-5_3 · Cited by 31
Wang, Z., Kang, S. B., Yang, E., & Won, S. W. (2022) · Journal of Environmental Management · doi:10.1016/j.jenvman.2022.115155 · Cited by 31
Waste plastic management: Recycling and the environmental health nexus
Nafiu, S. A., Azeez, M. O., AlAqad, K. M., Olarewaju, T. A., Yerima, E. A., & Tanimu, A. (2025) · Cleaner Materials · doi:10.1016/j.clema.2024.100291 · Cited by 31
Experimental investigation on bending strength of compacted plastic-concrete
Wei, R., & Sakai, Y. (2021) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2021.105521 · Cited by 29
Dorji, U., Dorji, P., Shon, H., Badeti, U., Dorji, C., Wangmo, C., Tijing, L., Kandasamy, J., Vigneswaran, S., Chanan, A., et al. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.131729 · Cited by 28
Maximizing the electrochemical performance of supercapacitor electrodes from plastic waste
Dědek, I., Bartusek, S., Dvořáček, J. J., Nečas, J., Petruš, J., Jakubec, P., Kupka, V., & Otyepka, M. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108660 · Cited by 28
Mechanical, physical and microstructural properties of a mortar with melted plastic waste binder
Thiam, M., & Fall, M. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124190 · Cited by 27
Concrete strength reduction due to over compaction
Howes, R., Hadi, M. N. S., & South, W. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.234 · Cited by 26
From plastic waste to new materials for energy storage
Olazabal, I., Goujon, N., Mantione, D., Alvarez‐Tirado, M., Jehanno, C., Mecerreyes, D., & Sardón, H. (2022) · Polymer Chemistry · doi:10.1039/d2py00592a · Cited by 26
Polyvinyl chloride Waste as an Adsorbent for the Sorption ofPb2+from Aqueous Solution
Wankasi, D., & Dikio, E. D. (2014) · Journal of Chemistry · doi:10.1155/2014/817527 · Cited by 24
Materials Used in Medical Devices
Sastri, V. R. (2010) · Plastics in Medical Devices · doi:10.1016/b978-0-8155-2027-6.10003-0 · Cited by 24
Regenerated cationic dyeable polyester deriving from poly(ethylene terephthalate) waste
Hu, Y., Wang, Y., Zhang, X., Qian, J., Xing, X., & Wang, X. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109261 · Cited by 22
Plastic roads: Not all they’re paved up to be
Conlon, K. (2022) · International Journal of Sustainable Development & World Ecology · doi:10.1080/13504509.2021.1915406 · Cited by 22
Correlation Between Ultrasonic Pulse Velocity and Thermal Conductivity of Cement-Based Composites
Mendes, J. C., Barreto, R. R., Costa, L. C. B., Brigolini, G. J., & Peixoto, R. A. F. (2020) · Journal of Nondestructive Evaluation · doi:10.1007/s10921-020-00680-7 · Cited by 20
Swinnerton, S., Kurtz, K., Neba Nforsoh, S., Craver, V., & Tsai, C. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.143818 · Cited by 19
Plastics Solutions for Practical Problems
Biron, M. (2012) · Elsevier eBooks · doi:10.1016/b978-1-4557-7898-0.00007-x · Cited by 19
Reduction of the carbon footprint through polystyrene recycling: Economical evaluation
Gutiérrez, C., Rodríguez, J. F., Gracia, I., de Lucas, A., & García, M. T. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2015.12.004 · Cited by 18
Engineering properties of a building material with melted plastic waste as the only binder
Thiam, M., & Fall, M. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.102684 · Cited by 16
Microfabrication of polymers for bioMEMS
Rezai, P., Wu, W.-I., & Selvaganapathy, P. R. (2012) · Elsevier eBooks · doi:10.1533/9780857096272.1.3 · Cited by 14
Recycling Waste Paver Blocks in the Manufacture of New Concrete Paver Blocks and Building Bricks
Kim, J., & Kim, N. (2022) · Applied Sciences · doi:10.3390/app122110970 · Cited by 10
Barrett, N., Miller, J. R., & Orbock-Miller, S. (2024) · Environments · doi:10.3390/environments11090195 · Cited by 10
Environmental Aspects of Plastics
Shrivastava, A. (2018) · Introduction to Plastics Engineering · doi:10.1016/b978-0-323-39500-7.00007-1 · Cited by 10
Testing of Action of Direct Flame on Concrete
Bodnarova, L., Valek, J., & Novosad, P. (2015) · The Scientific World JOURNAL · doi:10.1155/2015/371913 · Cited by 8
Superabsorbent hydrogels prepared from waste polystyrene and linear low-density polyethylene
Ismail, H., Irani, M., & Ahmad, Z. (2013) · Journal of Elastomers & Plastics · doi:10.1177/0095244312458604 · Cited by 6
Akinwumi, I., Soladoye, O., Ajayi, V., & Epelle, P. (2022) · Infrastructures · doi:10.3390/infrastructures7120172 · Cited by 5
Cited by
Khan, S., Kalsoom, U., Kashif, M., Hussain, S. A., Gul, M., Azizi, S., & Mâaza, M. (2025) · Water Air & Soil Pollution · doi:10.1007/s11270-025-08468-z · Cited by 35
Mohsin, M. A., & zaid, A. A. (2025) · Polymers · doi:10.3390/polym18010029 · Cited by 29
Gunderen, I., Okan, Z., Durmaz, H., Kumbaracı, V., Acik, G., & Altınkök, Ç. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.118551 · Cited by 23
Pyrolytic upcycling of plastic waste into graphene and carbon nanostructures
Faizan, M., Jallow, A. A., Siddiqui, M. N., & Jameel, A. G. A. (2025) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2025.107407 · Cited by 14
Metadata
- Authors
- Haba, B., Djellali, S., Abdelouahed, Y., Boudjelida, S., Faleschini, F., & Carraro, M.
- Affiliations
- University Ferhat Abbas of Setif (DZ)
- University of Padua (IT)
- Corresponding author
- Haba, Bourhaneddine
- Djellali, Souad
- Carraro, Mauro
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2025-03-26
- Volume
- 17
- Issue
- 7
- Pages
- 881
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC11991620
- OpenAlex
- W4408851460
- Semantic Scholar
- 16529347ee3bfe864e13632a016c155ae62882b6
- Cited by
- 68
- References
- 124
- Citations by year
- 2026: 41 · 2025: 27
- FWCI
- 7.58
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Padua Research Archive (University of Padova) (submittedVersion, cc-by)
- Funders
- Next-Generation EU (M4 C2, Invest 1.3—D.D. 1551.11-10-2022, PE00000004)
- Topics
- Physical Sciences › Engineering › Building and Construction › Recycling and utilization of industrial and municipal waste in materials production
- Physical Sciences › Engineering › Building and Construction › Recycled Aggregate Concrete Performance
- Physical Sciences › Engineering › Building and Construction › Materials Engineering and Processing
- Keywords
- plastic recycling, recycled plastic composites, sustainable construction, waste valorization, thermoplastic waste, fillers, binder materials, thermal insulation, sound insulation, hot pressing, waste management
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.