The DOI matches its Crossref record; 207 of the 207 references it cites were found in a registry or an index.
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Abstract
Since the time of the industrial revolution, the atmospheric CO 2 concentration has risen by nearly 35 % to its current level of 383 ppm. The increased carbon dioxide concentration in the atmosphere has been suggested to be a leading contributor to global climate change. To slow the increase, reductions in anthropogenic CO 2 emissions are necessary. Large emission point sources, such as fossil‐fuel‐based power generation facilities, are the first targets for these reductions. A benchmark, mature technology for the separation of dilute CO 2 from gas streams is via absorption with aqueous amines. However, the use of solid adsorbents is now being widely considered as an alternative, potentially less‐energy‐intensive separation technology. This Review describes the CO 2 adsorption behavior of several different classes of solid carbon dioxide adsorbents, including zeolites, activated carbons, calcium oxides, hydrotalcites, organic–inorganic hybrids, and metal‐organic frameworks. These adsorbents are evaluated in terms of their equilibrium CO 2 capacities as well as other important parameters such as adsorption–desorption kinetics, operating windows, stability, and regenerability. The scope of currently available CO 2 adsorbents and their critical properties that will ultimately affect their incorporation into large‐scale separation processes is presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1990) · Cited by 9,358
Design and synthesis of an exceptionally stable and highly porous metal-organic framework
Li, H., Eddaoudi, M., O'Keeffe, M., & Yaghi, O. M. (1999) · Nature · doi:10.1038/46248 · Cited by 8,554
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Progress in carbon dioxide separation and capture: A review
Yang, H., Xu, Z., Fan, M., Gupta, R., Slimane, R. B., Bland, A. E., & Wright, I. (2008) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(08)60002-9 · Cited by 2,087
Soler-Illia, G. J. D. A. A., Sanchez, C., Lebeau, B., & Patarin, J. (2002) · Chemical Reviews · doi:10.1021/cr0200062 · Cited by 1,958
Kinetics of carbamate formation and breakdown
Caplow, M. (1968) · Journal of the American Chemical Society · doi:10.1021/ja01026a041 · Cited by 1,365
Gas molecule adsorption in carbon nanotubes and nanotube bundles
Zhao, J., Buldum, A., Han, J., & Lu, J. P. (2002) · Nanotechnology · doi:10.1088/0957-4484/13/2/312 · Cited by 1,163
Adsorption Equilibrium of Methane, Carbon Dioxide, and Nitrogen on Zeolite 13X at High Pressures
Cavenati, S., Grande, C. A., & Rodrigues, A. E. (2004) · Journal of Chemical & Engineering Data · doi:10.1021/je0498917 · Cited by 1,147
Cited by
Metal–Organic Frameworks for Separations
Li, J.-R., Sculley, J., & Zhou, H.-C. (2012) · Chemical Reviews · doi:10.1021/cr200190s · Cited by 6,323
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Water Stability and Adsorption in Metal–Organic Frameworks
Burtch, N. C., Jasuja, H., & Walton, K. S. (2014) · Chemical Reviews · doi:10.1021/cr5002589 · Cited by 2,730
Direct Capture of CO2 from Ambient Air
Sanz-Pérez, E. S., Murdock, C. R., Didas, S. A., & Jones, C. W. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00173 · Cited by 2,406
Self-citationCarbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Carbon dioxide capture-related gas adsorption and separation in metal-organic frameworks
Li, J.-R., Ma, Y., McCarthy, M. C., Sculley, J., Yu, J., Jeong, H.-K., Balbuena, P. B., & Zhou, H.-C. (2011) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2011.02.012 · Cited by 2,019
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Recycling of carbon dioxide to methanol and derived products – closing the loop
Goeppert, A., Czaun, M., Jones, J.-P., Surya Prakash, G. K., & Olah, G. A. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00122b · Cited by 1,528
Prospects of CO2 Utilization via Direct Heterogeneous Electrochemical Reduction
Whipple, D. T., & Kenis, P. J. A. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1012627 · Cited by 1,417
Anthropogenic Chemical Carbon Cycle for a Sustainable Future
Olah, G. A., Prakash, G. K. S., & Goeppert, A. (2011) · Journal of the American Chemical Society · doi:10.1021/ja202642y · Cited by 1,376
Cooperative insertion of CO2 in diamine-appended metal-organic frameworks
McDonald, T. M., Mason, J. A., Kong, X., Bloch, E. D., Gygi, D., Dani, A., Crocellà, V., Giordanino, F., Odoh, S. O., Drisdell, W. S., et al. (2015) · Nature · doi:10.1038/nature14327 · Cited by 1,342
Titirici, M.-M., White, R. J., Brun, N., Budarin, V. L., Su, D. S., del Monte, F., Clark, J. H., & MacLachlan, M. J. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00232f · Cited by 1,277
Development and Evaluation of Porous Materials for Carbon Dioxide Separation and Capture
Bae, Y., & Snurr, R. Q. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201101891 · Cited by 1,208
(2020) · doi:10.1016/j.rser.2019.109620 · Cited by 1,160
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Natural gas origin, composition, and processing: A review
Faramawy, S., Zaki, T., & Sakr, A. A.-E. (2016) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2016.06.030 · Cited by 788
Review of recent advances in carbon dioxide separation and capture
Kenarsari, S. D., Yang, D., Jiang, G., Zhang, S., Wang, J., Russell, A. G., Wei, Q., & Fan, M. (2013) · RSC Advances · doi:10.1039/c3ra43965h · Cited by 784
Perspective of microporous metal–organic frameworks for CO2capture and separation
Zhang, Z., Yao, Z.-Z., Xiang, S., & Chen, B. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00143e · Cited by 767
Carbon dioxide and formic acid—the couple for environmental-friendly hydrogen storage?
Enthaler, S., von Langermann, J., & Schmidt, T. (2010) · Energy & Environmental Science · doi:10.1039/b907569k · Cited by 753
Metal‐Free Carbon Materials for CO2 Electrochemical Reduction
Duan, X., Xu, J., Wei, Z., Ma, J., Guo, S., Wang, S., Liu, H., & Dou, S. (2017) · Advanced Materials · doi:10.1002/adma.201701784 · Cited by 754
Graphene-based materials: Synthesis and gas sorption, storage and separation
Gadipelli, S., & Guo, Z. X. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.10.004 · Cited by 734
Air as the renewable carbon source of the future: an overview of CO2 capture from the atmosphere
Goeppert, A., Czaun, M., Surya Prakash, G. K., & Olah, G. A. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21586a · Cited by 724
Porous materials for carbon dioxide separations
Siegelman, R. L., Kim, E. J., & Long, J. R. (2021) · Nature Materials · doi:10.1038/s41563-021-01054-8 · Cited by 722
Carbon Capture and Utilization Update
Al‐Mamoori, A., Krishnamurthy, A., Rownaghi, A. A., & Rezaei, F. (2017) · Energy Technology · doi:10.1002/ente.201600747 · Cited by 719
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Microporous Polycarbazole with High Specific Surface Area for Gas Storage and Separation
Chen, Q., Luo, M., Hammershøj, P., Zhou, D., Han, Y., Laursen, B. W., Yan, C.-G., & Han, B.-H. (2012) · Journal of the American Chemical Society · doi:10.1021/ja300438w · Cited by 704
Direct air capture: process technology, techno-economic and socio-political challenges
Erans, M., Sanz-Pérez, E. S., Hanak, D. P., Clulow, Z., Reiner, D. M., & Mutch, G. A. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03523a · Cited by 688
Sorbents for the Direct Capture of CO 2 from Ambient Air
Shi, X., Xiao, H., Azarabadi, H., Song, J., Wu, X., Chen, X., & Lackner, K. S. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201906756 · Cited by 679
Bae, T., Lee, J. S., Qiu, W., Koros, W. J., Jones, C. W., & Nair, S. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201006141 · Cited by 678
Self-citationEffect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Porous materials with pre-designed single-molecule traps for CO2 selective adsorption
Li, J.-R., Yu, J., Lu, W., Sun, L.-B., Sculley, J., Balbuena, P. B., & Zhou, H.-C. (2013) · Nature Communications · doi:10.1038/ncomms2552 · Cited by 631
Yang, Q., Yang, C., Lin, C., & Jiang, H. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201813494 · Cited by 624
Porous Inorganic Membranes for CO2 Capture: Present and Prospects
Pera-Titus, M. (2014) · Chemical Reviews · doi:10.1021/cr400237k · Cited by 614
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Carbon Dioxide Capture from the Air Using a Polyamine Based Regenerable Solid Adsorbent
Goeppert, A., Czaun, M., May, R. B., Prakash, G. K. S., Olah, G. A., & Narayanan, S. R. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2100005 · Cited by 558
Pi, Y., Li, X., Xia, Q., Wu, J., Li, Y., Xiao, J., & Li, Z. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.092 · Cited by 549
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
McDonald, T. M., D'Alessandro, D. M., Krishna, R., & Long, J. R. (2011) · Chemical Science · doi:10.1039/c1sc00354b · Cited by 522
Carbon dioxide utilization with C–N bond formation: carbon dioxide capture and subsequent conversion
Yang, Z.-Z., He, L.-N., Gao, J., Liu, A.-H., & Yu, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02774g · Cited by 520
Opportunities and challenges in carbon dioxide capture
Spigarelli, B. P., & Kawatra, S. K. (2013) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2013.03.002 · Cited by 512
Qi, G., Wang, Y., Estevez, L., Duan, X., Anako, N., Park, A.-H. A., Li, W., Jones, C. W., & Giannelis, E. P. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00213e · Cited by 507
Self-citationSerna-Guerrero, R., & Sayari, A. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.04.042 · Cited by 489
Dunstan, M. T., Donat, F., Bork, A. H., Grey, C. P., & Müller, C. R. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00100 · Cited by 481
Zeolites as Selective Adsorbents for CO2 Separation
Boer, D. G., Langerak, J., & Pescarmona, P. P. (2023) · ACS Applied Energy Materials · doi:10.1021/acsaem.2c03605 · Cited by 481
Li, L., Zhao, N., Wei, W., & Sun, Y. (2013) · Fuel · doi:10.1016/j.fuel.2011.08.022 · Cited by 480
Application of Amine-Tethered Solid Sorbents for Direct CO2 Capture from the Ambient Air
Choi, S., Drese, J. H., Eisenberger, P. M., & Jones, C. W. (2011) · Environmental Science & Technology · doi:10.1021/es102797w · Cited by 466
Self-citationS-scheme heterojunction photocatalysts for CO2 reduction
Wang, L., Zhu, B., Zhang, J., Ghasemi, J. B., Mousavi, M., & Yu, J. (2022) · Matter · doi:10.1016/j.matt.2022.09.009 · Cited by 458
Layered Double Hydroxide‐based Nanomaterials as Highly Efficient Catalysts and Adsorbents
Li, C., Wei, M., Evans, D. G., & Duan, X. (2014) · Small · doi:10.1002/smll.201401464 · Cited by 451
Evaluation of cation-exchanged zeolite adsorbents for post-combustion carbon dioxide capture
Bae, T.-H., Hudson, M. R., Mason, J. A., Queen, W. L., Dutton, J. J., Sumida, K., Micklash, K. J., Kaye, S. S., Brown, C. M., & Long, J. R. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23337a · Cited by 437
Porous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
A comparative energy and costs assessment and optimization for direct air capture technologies
Sabatino, F., Grimm, A., Gallucci, F., van Sint Annaland, M., Kramer, G. J., & Gazzani, M. (2021) · Joule · doi:10.1016/j.joule.2021.05.023 · Cited by 429
Carbon Capture From Flue Gas and the Atmosphere: A Perspective
Wang, X., & Song, C. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.560849 · Cited by 428
Srinivas, G., Krungleviciute, V., Guo, Z.-X., & Yildirim, T. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42918k · Cited by 428
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
Wei, H., Deng, S., Hu, B., Chen, Z., Wang, B., Huang, J., & Yu, G. (2012) · ChemSusChem · doi:10.1002/cssc.201200570 · Cited by 421
Metal–organic frameworks for upgrading biogas via CO2 adsorption to biogas green energy
Chaemchuen, S., Kabir, N. A., Zhou, K., & Verpoort, F. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60244c · Cited by 416
Utilization of zeolites as CO2 capturing agents: Advances and future perspectives
Kumar, S., Srivastava, R., & Koh, J. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101251 · Cited by 405
Carbon capture in metal–organic frameworks—a comparative study
Simmons, J. M., Wu, H., Zhou, W., & Yildirim, T. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00700e · Cited by 402
Amine-oxide hybrid materials for acid gas separations
Bollini, P., Didas, S. A., & Jones, C. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12522b · Cited by 397
Self-citationBiomass-derived carbon electrode materials for supercapacitors
Lu, H., & Zhao, X. S. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00099e · Cited by 396
CO2 chemistry: task-specific ionic liquids for CO2 capture/activation and subsequent conversion
Yang, Z.-Z., Zhao, Y.-N., & He, L.-N. (2011) · RSC Advances · doi:10.1039/c1ra00307k · Cited by 393
Serafin, J., Narkiewicz, U., Morawski, A. W., Wróbel, R. J., & Michalkiewicz, B. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.01.006 · Cited by 393
Wang, C., Cui, G., Luo, X., Xu, Y., Li, H., & Dai, S. (2011) · Journal of the American Chemical Society · doi:10.1021/ja204808h · Cited by 390
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Fan, L.-S., Zeng, L., Wang, W., & Luo, S. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03198a · Cited by 381
Singh, G., Kim, I. Y., Lakhi, K. S., Srivastava, P., Naidu, R., & Vinu, A. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.015 · Cited by 379
CO2-Induced Degradation of Amine-Containing Adsorbents: Reaction Products and Pathways
Sayari, A., Heydari-Gorji, A., & Yang, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja304888a · Cited by 365
CO2 capture adsorbents functionalized by amine – bearing polymers: A review
Varghese, A. M., & Karanikolos, G. N. (2020) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2020.103005 · Cited by 363
Structuring adsorbents and catalysts by processing of porous powders
Akhtar, F., Andersson, L., Ogunwumi, S., Hedin, N., & Bergström, L. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.01.008 · Cited by 363
Belmabkhout, Y., Guillerm, V., & Eddaoudi, M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.124 · Cited by 358
Trends in Solid Adsorbent Materials Development for CO 2 Capture
Pardakhti, M., Jafari, T., Tobin, Z., Dutta, B., Moharreri, E., Shemshaki, N. S., Suib, S., & Srivastava, R. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08487 · Cited by 357
High‐Surface‐Area Carbon Molecular Sieves for Selective CO2 Adsorption
Wahby, A., Ramos‐Fernández, J. M., Martínez‐Escandell, M., Sepúlveda‐Escribano, A., Silvestre‐Albero, J., & Rodríguez‐Reinoso, F. (2010) · ChemSusChem · doi:10.1002/cssc.201000083 · Cited by 353
CaO‐Based CO2 Sorbents: From Fundamentals to the Development of New, Highly Effective Materials
Kierzkowska, A. M., Pacciani, R., & Müller, C. R. (2013) · ChemSusChem · doi:10.1002/cssc.201300178 · Cited by 351
A general framework for the assessment of solar fuel technologies
Herron, J. A., Kim, J., Upadhye, A. A., Huber, G. W., & Maravelias, C. T. (2015) · Energy & Environmental Science · doi:10.1039/c4ee01958j · Cited by 347
Abd, A. A., Naji, S. Z., Hashim, A. S., & Othman, M. R. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104142 · Cited by 346
Choi, S., Gray, M. L., & Jones, C. W. (2011) · ChemSusChem · doi:10.1002/cssc.201000355 · Cited by 345
Self-citationChitosan derived nitrogen-doped microporous carbons for high performance CO2 capture
Fan, X., Zhang, L., Zhang, G., Shu, Z., & Shi, J. (2013) · Carbon · doi:10.1016/j.carbon.2013.05.026 · Cited by 345
Amine–Oxide Hybrid Materials for CO2 Capture from Ambient Air
Didas, S. A., Choi, S., Chaikittisilp, W., & Jones, C. W. (2015) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00284 · Cited by 342
Self-citationHarnessing Filler Materials for Enhancing Biogas Separation Membranes
Chuah, C. Y., Goh, K., Yang, Y., Gong, H., Li, W., Karahan, H. E., Guiver, M. D., Wang, R., & Bae, T.-H. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00091 · Cited by 339
Lee, W. R., Hwang, S. Y., Ryu, D. W., Lim, K. S., Han, S. S., Moon, D., Choi, J., & Hong, C. S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42328j · Cited by 329
Ammendola, P., Raganati, F., & Chirone, R. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.04.037 · Cited by 314
Valorisation of spent coffee grounds as CO2 adsorbents for postcombustion capture applications
Plaza, M. G., González, A. S., Pevida, C., Pis, J. J., & Rubiera, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.05.028 · Cited by 313
Quantum-Chemical Characterization of the Properties and Reactivities of Metal–Organic Frameworks
Odoh, S. O., Cramer, C. J., Truhlar, D. G., & Gagliardi, L. (2015) · Chemical Reviews · doi:10.1021/cr500551h · Cited by 306
Towards Solar Fuels from Water and CO2
Centi, G., & Perathoner, S. (2010) · ChemSusChem · doi:10.1002/cssc.200900289 · Cited by 295
Materials challenges for the development of solid sorbents for post-combustion carbon capture
Drage, T. C., Snape, C. E., Stevens, L. A., Wood, J., Wang, J., Cooper, A. I., Dawson, R., Guo, X., Satterley, C., & Irons, R. (2012) · J. Mater. Chem. · doi:10.1039/c2jm12592g · Cited by 292
Abscheidung von Kohlendioxid: Perspektiven für neue Materialien
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie · doi:10.1002/ange.201000431 · Cited by 291
A review on progress made in direct air capture of CO 2
Sodiq, A., Abdullatif, Y., Aissa, B., Ostovar, A., Nassar, N., El-Naas, M., & Amhamed, A. (2023) · Environmental Technology & Innovation · doi:10.1016/j.eti.2022.102991 · Cited by 285
CO2 capture and storage: A way forward for sustainable environment
Anwar, M. N., Fayyaz, A., Sohail, N. F., Khokhar, M. F., Baqar, M., Khan, W. D., Rasool, K., Rehan, M., & Nizami, A. S. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.08.009 · Cited by 285
3D-Printed Zeolite Monoliths for CO2 Removal from Enclosed Environments
Thakkar, H., Eastman, S., Hajari, A., Rownaghi, A. A., Knox, J. C., & Rezaei, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09647 · Cited by 284
Carbon dioxide capture with zeotype materials
Fu, D., & Davis, M. E. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00508e · Cited by 284
Chemical functionalization strategies for carbon dioxide capture in microporous organic polymers
Dawson, R., Cooper, A. I., & Adams, D. J. (2013) · Polymer International · doi:10.1002/pi.4407 · Cited by 284
Yue, X., Ma, N. L., Sonne, C., Guan, R., Lam, S. S., Van Le, Q., Chen, X., Yang, Y., Gu, H., Rinklebe, J., et al. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.124138 · Cited by 283
2D Transition Metal Carbides (MXenes) for Carbon Capture
Persson, I., Halim, J., Lind, H., Hansen, T. W., Wagner, J. B., Näslund, L., Darakchieva, V., Palisaitis, J., Rosen, J., & Persson, P. O. Å. (2019) · Advanced Materials · doi:10.1002/adma.201805472 · Cited by 282
Recent progress in metal-organic frameworks (MOFs) for CO2 capture at different pressures
Mahajan, S., & Lahtinen, M. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108930 · Cited by 282
Tuning CO2 Selective Adsorption over N2 and CH4 in UiO-67 Analogues through Ligand Functionalization
Wang, B., Huang, H., Lv, X.-L., Xie, Y., Li, M., & Li, J.-R. (2014) · Inorganic Chemistry · doi:10.1021/ic5013473 · Cited by 278
Metadata
- Authors
- Choi, S., Drese, J. H., & Jones, C. W.
- Venue
- ChemSusChem
- Publisher
- Wiley
- Published
- 2009-09-14
- Volume
- 2
- Issue
- 9
- Pages
- 796-854
- ISSN
- 1864-5631 (ISSN-L)
- 1864-564X
- OpenAlex
- W2104943417
- Cited by
- 2,596
- References
- 207
- FWCI
- 206.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.