The DOI matches its Crossref record; 160 of the 160 references it cites were found in a registry or an index.
Biodegradable metals
Abstract
After decades of developing strategies to minimize the corrosion of metallic biomaterials, there is now an increasing interest to use corrodible metals in a number of medical device applications. The term ‘‘biodegradable metal’’ (BM) has been used worldwide to describe these new kinds of degradable metallic biomaterials for medical applications and there were many new findings reported over the last decade. In this paper, the definition of BM and its classification are given for the first time, along with the summary of the degradation mechanisms of BMs and its environmental influencing factors, which includes the degeneration of mechanical integrity and the metabolism of the degradation products. The recentlydeveloped representative Mg-based BMs (pure Mg, Mg–Ca alloy, Mg–Zn alloy, etc.), Fe-based BMs (pure Fe, Fe–Mn-based alloys, etc.) and other BMs (pure W, pure Zn and its alloys, Ca-based and Sr-based bulk metallic glasses, etc.) were comprehensively reviewed with emphases on their microstructures, mechanical properties and degradation behaviors, in vitro and in vivo performances, pre-clinical and clinical trials. Moreover, current approaches to control their biodegradation rates to match the healing rates of the host tissues with various surface modification techniques and novel structural designs are summarized. Finally, this paper comprehensively discusses the directions of future development and the challenges of transitioning BMs from raw materials to semi-products to final medical devices. All in all, BM belongs to ‘‘bioactive’’ biomaterials and its future research and development direction should lean towards ‘‘third-generation biomedical materials’’ with ‘‘multifunctional capabilities’’ in a controllable manner to benefit the local tissue reconstruction. 2014 Elsevier B.V. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis and surface engineering of iron oxide nanoparticles for biomedical applications
Gupta, A. K., & Gupta, M. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.012 · Cited by 6,771
(2013) · doi:10.1016/c2009-0-02433-7 · Cited by 5,127
Third-Generation Biomedical Materials
Hench, L. L., & Polak, J. M. (2002) · Science · doi:10.1126/science.1067404 · Cited by 2,789
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
Journal of The American College of Cardiology
(2015) · Wilderness & Environmental Medicine · doi:10.1016/j.wem.2015.03.023 · Cited by 2,584
Hydrogen acts as a therapeutic antioxidant by selectively reducing cytotoxic oxygen radicals
Ohsawa, I., Ishikawa, M., Takahashi, K., Watanabe, M., Nishimaki, K., Yamagata, K., Katsura, K.-I., Katayama, Y., Asoh, S., & Ohta, S. (2007) · Nature Medicine · doi:10.1038/nm1577 · Cited by 2,560
In vivo corrosion of four magnesium alloys and the associated bone response
Witte, F., Kaese, V., Haferkamp, H., Switzer, E., Meyer-Lindenberg, A., Wirth, C. J., & Windhagen, H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.09.049 · Cited by 2,395
Self-citationMahmoudi, M., Sant, S., Wang, B., Laurent, S., & Sen, T. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2010.05.006 · Cited by 1,881
The history of biodegradable magnesium implants: A review☆
Witte, F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.028 · Cited by 1,860
Self-citationDegradable biomaterials based on magnesium corrosion
Witte, F., Hort, N., Vogt, C., Cohen, S., Kainer, K. U., Willumeit, R., & Feyerabend, F. (2008) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2009.04.001 · Cited by 1,820
Self-citation
Cited by
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Fundamentals and advances in magnesium alloy corrosion
Esmaily, M., Svensson, J. E., Fajardo, S., Birbilis, N., Frankel, G. S., Virtanen, S., Arrabal, R., Thomas, S., & Johansson, L. G. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.011 · Cited by 2,073
The rise of plastic bioelectronics
Someya, T., Bao, Z., & Malliaras, G. G. (2016) · Nature · doi:10.1038/nature21004 · Cited by 1,884
Recent advances on the development of magnesium alloys for biodegradable implants
Chen, Y., Xu, Z., Smith, C., & Sankar, J. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.07.005 · Cited by 1,236
Corrosion of Metallic Biomaterials: A Review
Eliaz, N. (2019) · Materials · doi:10.3390/ma12030407 · Cited by 984
Agarwal, S., Curtin, J., Duffy, B., & Jaiswal, S. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.06.020 · Cited by 955
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
Zhao, D., Witte, F., Lu, F., Wang, J., Li, J., & Qin, L. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.017 · Cited by 945
Self-citationBiodegradable and flexible arterial-pulse sensor for the wireless monitoring of blood flow
Boutry, C. M., Beker, L., Kaizawa, Y., Vassos, C., Tran, H., Hinckley, A. C., Pfattner, R., Niu, S., Li, J., Claverie, J., et al. (2019) · Nature Biomedical Engineering · doi:10.1038/s41551-018-0336-5 · Cited by 862
Design of biodegradable, implantable devices towards clinical translation
Li, C., Guo, C., Fitzpatrick, V., Ibrahim, A., Zwierstra, M. J., Hanna, P., Lechtig, A., Nazarian, A., Lin, S. J., & Kaplan, D. L. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0150-z · Cited by 808
Alloying design of biodegradable zinc as promising bone implants for load-bearing applications
Yang, H., Jia, B., Zhang, Z., Qu, X., Li, G., Lin, W., Zhu, D., Dai, K., & Zheng, Y. (2020) · Nature Communications · doi:10.1038/s41467-019-14153-7 · Cited by 756
Self-citationBone biomaterials and interactions with stem cells
Gao, C., Peng, S., Feng, P., & Shuai, C. (2017) · Bone Research · doi:10.1038/boneres.2017.59 · Cited by 720
Wang, J., & Bai, Z. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.11.118 · Cited by 705
Review of magnesium-based biomaterials and their applications
Sezer, N., Evis, Z., Kayhan, S. M., Tahmasebifar, A., & Koç, M. (2018) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2018.02.003 · Cited by 704
The role and significance of Magnesium in modern day research-A review
Prasad, S. V. S., Prasad, S. B., Verma, K., Mishra, R. K., Kumar, V., & Singh, S. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.05.012 · Cited by 683
A stretchable and biodegradable strain and pressure sensor for orthopaedic application
Boutry, C. M., Kaizawa, Y., Schroeder, B. C., Chortos, A., Legrand, A., Wang, Z., Chang, J., Fox, P., & Bao, Z. (2018) · Nature Electronics · doi:10.1038/s41928-018-0071-7 · Cited by 667
A Sensitive and Biodegradable Pressure Sensor Array for Cardiovascular Monitoring
Boutry, C. M., Nguyen, A., Lawal, Q. O., Chortos, A., Rondeau‐Gagné, S., & Bao, Z. (2015) · Advanced Materials · doi:10.1002/adma.201502535 · Cited by 647
Biodegradable Mg alloys for orthopedic implants – A review
Tsakiris, V., Tardei, C., & Clicinschi, F. M. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.06.024 · Cited by 612
Yuan, L., Ding, S., & Wen, C. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.12.003 · Cited by 593
Venezuela, J., & Dargusch, M. S. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.035 · Cited by 588
Biodegradable magnesium-based implants in orthopedics-a general review and perspectives
Wang, J., Xu, J., Hopkins, C., Chow, D. H., & Qin, L. (2020) · Advanced Science · doi:10.1002/advs.201902443 · Cited by 574
Zinc-based alloys for degradable vascular stent applications
Mostaed, E., Sikora-Jasinska, M., Drelich, J. W., & Vedani, M. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.03.005 · Cited by 565
Biodegradable Metals for Cardiovascular Stents: from Clinical Concerns to Recent Zn‐Alloys
Bowen, P. K., Shearier, E. R., Zhao, S., Guillory, R. J., Zhao, F., Goldman, J., & Drelich, J. W. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201501019 · Cited by 544
3D Bioprinting for Organ Regeneration
Cui, H., Nowicki, M., Fisher, J. P., & Zhang, L. G. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601118 · Cited by 535
Fundamental Theory of Biodegradable Metals—Definition, Criteria, and Design
Liu, Y., Zheng, Y., Chen, X., Yang, J., Pan, H., Chen, D., Wang, L., Zhang, J., Zhu, D., Wu, S., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805402 · Cited by 519
Self-citationWang, J., Witte, F., Xi, T., Zheng, Y., Yang, K., Yang, Y., Zhao, D., Meng, J., Li, Y., Li, W., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.04.011 · Cited by 493
Self-citationFlexible/Stretchable Supercapacitors with Novel Functionality for Wearable Electronics
Keum, K., Kim, J. W., Hong, S. Y., Son, J. G., Lee, S., & Ha, J. S. (2020) · Advanced Materials · doi:10.1002/adma.202002180 · Cited by 492
Long-term clinical study and multiscale analysis of in vivo biodegradation mechanism of Mg alloy
Lee, J.-W., Han, H.-S., Han, K.-J., Park, J., Jeon, H., Ok, M.-R., Seok, H.-K., Ahn, J.-P., Lee, K. E., Lee, D.-H., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1518238113 · Cited by 480
Mg bone implant: Features, developments and perspectives
Yang, Y., He, C., Dianyu, E., Yang, W., Qi, F., Xie, D., Shen, L., Peng, S., & Shuai, C. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108259 · Cited by 433
Progress of biodegradable metals
Li, H., Zheng, Y., & Qin, L. (2014) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2014.08.014 · Cited by 432
Self-citationLi, X., Liu, X., Wu, S., Yeung, K. W. K., Zheng, Y., & Chu, P. K. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.09.005 · Cited by 428
Self-citationCurrent status and outlook on the clinical translation of biodegradable metals
Han, H.-S., Loffredo, S., Jun, I., Edwards, J., Kim, Y.-C., Seok, H.-K., Witte, F., Mantovani, D., & Glyn-Jones, S. (2019) · Materials Today · doi:10.1016/j.mattod.2018.05.018 · Cited by 423
Self-citationAdvances in coatings on biodegradable magnesium alloys
Yin, Z.-Z., Qi, W.-C., Zeng, R.-C., Chen, X.-B., Gu, C.-D., Guan, S.-K., & Zheng, Y.-F. (2020) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2019.09.008 · Cited by 419
Self-citationZinc-based biomaterials for regeneration and therapy
Su, Y., Cockerill, I., Wang, Y., Qin, Y.-X., Chang, L., Zheng, Y., & Zhu, D. (2019) · Trends in biotechnology · doi:10.1016/j.tibtech.2018.10.009 · Cited by 417
Self-citationYang, H., Wang, C., Liu, C., Chen, H., Wu, Y., Han, J., Jia, Z., Lin, W., Zhang, D., Li, W., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.08.022 · Cited by 399
Self-citationKabir, H., Munir, K., Wen, C., & Li, Y. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.09.013 · Cited by 397
Additively manufactured biodegradable porous magnesium
Li, Y., Zhou, J., Pavanram, P., Leeflang, M. A., Fockaert, L. I., Pouran, B., Tümer, N., Schröder, K.-U., Mol, J. M. C., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.008 · Cited by 396
Magnesium matrix composites for biomedical applications: A review
Bommala, V. K., Krishna, M. G., & Rao, C. T. (2019) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2018.11.001 · Cited by 393
Zhou, H., Liang, B., Jiang, H., Deng, Z., & Yu, K. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.03.004 · Cited by 377
Potential biodegradable Zn-Cu binary alloys developed for cardiovascular implant applications
Tang, Z., Niu, J., Huang, H., Zhang, H., Pei, J., Ou, J., & Yuan, G. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.05.013 · Cited by 361
Kubásek, J., Vojtěch, D., Jablonská, E., Pospíšilová, I., Lipov, J., & Ruml, T. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.08.015 · Cited by 360
In vivo study of magnesium plate and screw degradation and bone fracture healing
Chaya, A., Yoshizawa, S., Verdelis, K., Myers, N., Costello, B. J., Chou, D.-T., Pal, S., Maiti, S., Kumta, P. N., & Sfeir, C. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.02.010 · Cited by 359
Zarei, M., Lee, G., Lee, S. G., & Cho, K. (2023) · Advanced Materials · doi:10.1002/adma.202203193 · Cited by 345
The Prospects of Zinc as a Structural Material for Biodegradable Implants—A Review Paper
Katarivas Levy, G., Goldman, J., & Aghion, E. (2017) · Metals · doi:10.3390/met7100402 · Cited by 340
Transparent Electronics for Wearable Electronics Application
Won, D., Bang, J., Choi, S. H., Pyun, K. R., Jeong, S., Lee, Y., & Ko, S. H. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00139 · Cited by 339
Influence of specific second phases on corrosion behaviors of Mg-Zn-Gd-Zr alloys
Yin, S., Duan, W., Liu, W., Wu, L., Yu, J., Zhao, Z., Liu, M., Wang, P., Cui, J., & Zhang, Z. (2020) · Corrosion Science · doi:10.1016/j.corsci.2019.108419 · Cited by 316
Zeng, R.-C., Cui, L.-Y., Jiang, K., Liu, R., Zhao, B.-D., & Zheng, Y.-F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00527 · Cited by 314
Self-citationCurrent status and perspectives of zinc-based absorbable alloys for biomedical applications
Hernández-Escobar, D., Champagne, S., Yilmazer, H., Dikici, B., Boehlert, C. J., & Hermawan, H. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.07.034 · Cited by 309
Recent advances of additive manufacturing in implant fabrication – A review
Mobarak, M. H., Islam, M. A., Hossain, N., Al Mahmud, M. Z., Rayhan, M. T., Nishi, N. J., & Chowdhury, M. A. (2023) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2023.100462 · Cited by 307
Additive manufacturing of biodegradable metals: Current research status and future perspectives
Qin, Y., Wen, P., Guo, H., Xia, D., Zheng, Y., Jauer, L., Poprawe, R., Voshage, M., & Schleifenbaum, J. H. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.04.046 · Cited by 303
Self-citationFe-based Fenton-like catalysts for water treatment: Preparation, characterization and modification
Wang, J., & Tang, J. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.130177 · Cited by 302
Additively manufactured biodegradable porous iron
Li, Y., Jahr, H., Lietaert, K., Pavanram, P., Yilmaz, A., Fockaert, L. I., Leeflang, M. A., Pouran, B., Gonzalez-Garcia, Y., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.011 · Cited by 299
Micro-alloying with Mn in Zn–Mg alloy for future biodegradable metals application
Liu, X., Sun, J., Zhou, F., Yang, Y., Chang, R., Qiu, K., Pu, Z., Li, L., & Zheng, Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.128 · Cited by 292
Self-citationMaterials evolution of bone plates for internal fixation of bone fractures: A review
Li, J., Qin, L., Yang, K., Ma, Z., Wang, Y., Cheng, L., & Zhao, D. (2020) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2019.07.024 · Cited by 288
Yang, H., Qu, X., Lin, W., Wang, C., Zhu, D., Dai, K., & Zheng, Y. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.03.007 · Cited by 284
Self-citationMei, D., Lamaka, S. V., Lu, X., & Zheludkevich, M. L. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108722 · Cited by 284
Becoming Sustainable, The New Frontier in Soft Robotics
Hartmann, F., Baumgartner, M., & Kaltenbrunner, M. (2021) · Advanced Materials · doi:10.1002/adma.202004413 · Cited by 281
Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application
Niu, J., Tang, Z., Huang, H., Pei, J., Zhang, H., Yuan, G., & Ding, W. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.06.082 · Cited by 280
Biodegradable metallic bone implants
Shuai, C., Li, S., Peng, S., Feng, P., Lai, Y., & Gao, C. (2019) · Materials Chemistry Frontiers · doi:10.1039/c8qm00507a · Cited by 275
Lutzweiler, G., Ndreu Halili, A., & Engin Vrana, N. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12070602 · Cited by 271
Su, Y., Wang, K., Gao, J., Yang, Y., Qin, Y.-X., Zheng, Y., & Zhu, D. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.03.055 · Cited by 268
Self-citationLiu, J., Bian, D., Zheng, Y., Chu, X., Lin, Y., Wang, M., Lin, Z., Li, M., Zhang, Y., & Guan, S. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.11.013 · Cited by 268
Self-citationRecent progress and perspectives in additive manufacturing of magnesium alloys
Zeng, Z., Salehi, M., Kopp, A., Xu, S., Esmaily, M., & Birbilis, N. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2022.03.001 · Cited by 264
Metallic zinc exhibits optimal biocompatibility for bioabsorbable endovascular stents
Bowen, P. K., Guillory, R. J., Shearier, E. R., Seitz, J.-M., Drelich, J., Bocks, M., Zhao, F., & Goldman, J. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.07.022 · Cited by 261
Updates on the research and development of absorbable metals for biomedical applications
Hermawan, H. (2018) · Progress in Biomaterials · doi:10.1007/s40204-018-0091-4 · Cited by 260
Biodegradable magnesium‐based biomaterials: An overview of challenges and opportunities
Amukarimi, S., & Mozafari, M. (2021) · MedComm · doi:10.1002/mco2.59 · Cited by 258
Willbold, E., Gu, X., Albert, D., Kalla, K., Bobe, K., Brauneis, M., Janning, C., Nellesen, J., Czayka, W., Tillmann, W., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.041 · Cited by 254
Self-citationIn vitro and in vivo studies of Zn-Mn biodegradable metals designed for orthopedic applications
Jia, B., Yang, H., Han, Y., Zhang, Z., Qu, X., Zhuang, Y., Wu, Q., Zheng, Y., & Dai, K. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.03.009 · Cited by 253
Self-citationThe role of magnesium ions in bone regeneration involves the canonical Wnt signaling pathway
Hung, C.-C., Chaya, A., Liu, K., Verdelis, K., & Sfeir, C. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.06.001 · Cited by 237
A review on magnesium alloys for biomedical applications
Zhang, T., Wang, W., Liu, J., Wang, L., Tang, Y., & Wang, K. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.953344 · Cited by 208
“However, the cytotoxicity and neurotoxicity of Mn have been reported (Ding et al., 2011; Zheng et al., 2014).”
BackgroundDesign, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Self-citationSurface functionalization of biomaterials by radical polymerization
Zhou, T., Zhu, Y., Li, X., Liu, X., Yeung, K. W. K., Wu, S., Wang, X., Cui, Z., Yang, X., & Chu, P. K. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.04.005 · Cited by 145
Wang, S., Gu, R., Wang, F., Zhao, X., Yang, F., Xu, Y., Yan, F., Zhu, Y., Xia, D., & Liu, Y. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2021.100202 · Cited by 115
Li, B., Gao, P., Zhang, H., Guo, Z., Zheng, Y., & Han, Y. (2018) · Biomaterials Science · doi:10.1039/c8bm00901e · Cited by 80
Self-citationKannan, M. B., Moore, C., Saptarshi, S., Somasundaram, S., Rahuma, M., & Lopata, A. L. (2017) · Scientific Reports · doi:10.1038/s41598-017-15873-w · Cited by 79
Ben Amara, H., Martinez, D. C., Shah, F. A., Loo, A. J., Emanuelsson, L., Norlindh, B., Willumeit-Römer, R., Plocinski, T., Swieszkowski, W., Palmquist, A., et al. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.02.014 · Cited by 42
“366 Gas accumulation in soft tissues also accompanied the amplified inflammatory response to Mg implants in our study, and is presumed to result from hydrogen production by the corrosion reaction Mg+2H2O→Mg+2OH +H2 [3].”
BackgroundInfluentialWang, Z., Liu, B., Yin, B., Zheng, Y., Tian, Y., & Wen, P. (2022) · Frontiers in Chemistry · doi:10.3389/fchem.2022.1066103 · Cited by 30
Self-citationKovacevic, S., Ali, W., Mandal, T. K., Martínez-Pañeda, E., & LLorca, J. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.03.034 · Cited by 31
Peng, F., Xie, J., Liu, H., Zheng, Y., Qian, X., Zhou, R., Zhong, H., Zhang, Y., & Li, M. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.09.004 · Cited by 25
Self-citation
Metadata
- Authors
- Zheng, Y. F., Gu, X. N., & Witte, F.
- Venue
- Materials Science and Engineering: R: Reports
- Publisher
- Elsevier BV
- Published
- 2014-03
- Volume
- 77
- Pages
- 1-34
- ISSN
- 0927-796X (ISSN-L)
- OpenAlex
- W4211147970
- Cited by
- 2,436
- References
- 160
- FWCI
- 49.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.