The DOI matches its Crossref record; 17 of the 19 references it cites were found in a registry or an index.
Dimensionless correlations of frost properties on a cold plate
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Yang and Lee [27] presented an experimental correlation for the average frost density as a function of the dimensionless temperature, humidity ratio, Reynolds number, and Fourier number.”
In the citing paper
“This correlation was further developed by Yang and Lee [89].”
From Review on the measurement and calculation of frost characteristics (2018) · cites this paper as [89]
In the citing paper
“As evaluated by Léoni et al. [118], Hermes et al. assumed that only mass diffusion occurs in the frost layer (0.5 exponents for the time) contrary to Yang and Lee [89].”
From Review on the measurement and calculation of frost characteristics (2018) · cites this paper as [89]
In the citing paper
“Yang and Lee ' s correlation [40] was very much similar to Mao et al. ' s correlation [36], and the difference between the two was mainly due to frosting condi tions.”
From Frosting mechanism and behaviors on surfaces with simple geometries: A state-of-the-art literature review (2022) · cites this paper as Yang and Lee [40]
In the citing paper
“Yang and Lee [40] believed that a dimensionless temperature based on air and cold surface temperatures can be used to replace frost surface temperature, and they presented a correlation of average frost density as a function of the dimensionless temperature, air moisture content, Reynolds number and heat transfer Fourier number.”
From Frosting mechanism and behaviors on surfaces with simple geometries: A state-of-the-art literature review (2022) · cites this paper as Yang and Lee [40]
Citations
Cites
(1953) · Mechanical Engineering · Cited by 6,608
Kraus, A. D., Welty, J. R., & Aziz, A. (2011) · CRC Press eBooks · doi:10.1201/b12301-22 · Cited by 4,223
HAYHURST, A. N. (1997) · Food engineering series · doi:10.1007/978-1-4615-3864-6_3 · Cited by 999
Study of frost properties correlating with frost formation types
Hayashi, Y., Aoki, A., Adachi, S., & Hori, K. (1977) · Journal of Heat Transfer · doi:10.1115/1.3450675 · Cited by 402
Equation of the growth rate of frost forming on cooled surfaces
Schneider, H. W. (1978) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(78)90098-4 · Cited by 148
Frost deposition on cold surfaces
Brian, P. L. T., Reid, R. C., & Shah, Y. T. (1970) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160035a013 · Cited by 142
(1967) · ASHRAE winter conference papers · Cited by 128
Frost growth parameters in a forced air stream
Östin, R., & Andersson, S. (1991) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(91)90012-4 · Cited by 116
Measurement and Correlation of Water Frost Thermal Conductivity and Density
Biguria, G., & Wenzel, L. A. (1970) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160033a021 · Cited by 75
Study on Properties and Growth Rate of Frost Layers on Cold Surfaces
Tokura, I., Saito, H., & Kishinami, K. (1983) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3245679 · Cited by 50
Research works printed but not linked: 5
- Hosoda, 1967, Effects of frost on the heat transfer coefficient, Hitachi Review, 16, 254
- Mao, 1992, Measurement and correlations of frost properties with airflow over a flat plate, ASHRAE Transactions: Research, 91, 267
- Mao, 1999, Frost characteristics and heat transfer on a flat plate under freezer operating conditions, ASHRAE Transactions: Research, 105, 231
- Sherif, 1990, A semi-empirical transient method for modeling frost formation on a flat plate, ASHRAE Transactions, 139, 15
- O'Neal, 1985, A review of frost formation in simple geometries, ASHRAE Transactions, 91, 267
Cited by
Sorted by citations
A Review of Condensation Frosting
Nath, S., Ahmadi, S. F., & Boreyko, J. B. (2016) · Nanoscale and Microscale Thermophysical Engineering · doi:10.1080/15567265.2016.1256007 · Cited by 216
Review on the measurement and calculation of frost characteristics
Song, M., & Dang, C. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.03.094 · Cited by 212
Frost growth and densification in laminar flow over flat surfaces
Kandula, M. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.02.056 · Cited by 141
Shao, L.-L., Yang, L., & Zhang, C.-L. (2010) · Applied Energy · doi:10.1016/j.apenergy.2009.08.021 · Cited by 112
Frosting and defrosting characteristics of a fin according to surface contact angle
Kim, K., & Lee, K.-S. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.02.065 · Cited by 108
Self-citationFrosting model for predicting macroscopic and local frost behaviors on a cold plate
Kim, D., Kim, C., & Lee, K.-S. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.11.048 · Cited by 103
Self-citationState-of-the-art review of frost deposition on flat surfaces
Léoni, A., Mondot, M., Durier, F., Revellin, R., & Haberschill, P. (2016) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2016.04.004 · Cited by 103
Sommers, A., Gebhart, C. W., & Hermes, C. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.01.074 · Cited by 68
Modeling for predicting frosting behavior of a fin–tube heat exchanger
Yang, D.-K., Lee, K.-S., & Song, S. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2005.09.022 · Cited by 94
Self-citationCondensation frosting and passive anti-frosting
Yang, S., Wu, C., Zhao, G., Sun, J., Yao, X., Ma, X., & Wang, Z. (2021) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2021.100474 · Cited by 92
A generalized simple model for predicting frost growth on cold flat plate
Wang, W., Guo, Q. C., Lu, W. P., Feng, Y. C., & Na, W. (2012) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2011.10.011 · Cited by 89
Patil, M. S., Seo, J.-H., & Lee, M.-Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.107 · Cited by 86
Bai, H., Liu, P., Alonso, M. J., & Mathisen, H. M. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112417 · Cited by 85
Sommers, A. D., Truster, N. L., Napora, A. C., Riechman, A. C., & Caraballo, E. J. (2016) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.01.008 · Cited by 84
Zhang, L., Song, M., Deng, S., Shen, J., & Dang, C. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118984 · Cited by 83
Fin spacing optimization of a fin-tube heat exchanger under frosting conditions
Yang, D.-K., Lee, K.-S., & Song, S. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.01.016 · Cited by 81
Self-citationModeling of frosting behavior on a cold plate
Yang, D.-K., & Lee, K.-S. (2005) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2004.08.001 · Cited by 77
Self-citationLeoni, A., Mondot, M., Durier, F., Revellin, R., & Haberschill, P. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2017.06.005 · Cited by 80
Li, L., Khodakarami, S., Yan, X., Rabbi, K. F., Günay, A. A., Stillwell, A., & Miljkovic, N. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202201521 · Cited by 74
Experimental study of frost formation on cold surfaces with various fin layouts
Wu, X., Hu, S., & Chu, F. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.11.045 · Cited by 72
Xu, B., Han, Q., Chen, J., Li, F., Wang, N., Li, D., & Pan, X. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.09.026 · Cited by 71
A semi-empirical correlation for the frost density
Hermes, C. J. L., Loyola, F. R., & Nascimento, V. S. (2014) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2014.02.008 · Cited by 69
The behavior of frost layer growth under conditions favorable for desublimation
Lee, J., & Lee, K.-S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.039 · Cited by 68
Self-citationFrost formation from general-low to ultra-low temperatures: A review
Byun, S., Jeong, H., Son, H., Kim, D. R., & Lee, K.-S. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123164 · Cited by 66
Self-citationKim, K., Kim, M.-H., Kim, D. R., & Lee, K.-S. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.12.060 · Cited by 64
Self-citationFrost layer growth behavior under cryogenic conditions
Lee, J., Jeong, H., Kim, D. R., & Lee, K.-S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114333 · Cited by 60
Self-citationA semi-empirical correlation for the thermal conductivity of frost
Negrelli, S., & Hermes, C. J. L. (2015) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2015.05.021 · Cited by 59
Dimensionless correlations of frost properties on a cold cylinder surface
Kim, J.-S., Yang, D.-K., & Lee, K.-S. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.01.007 · Cited by 57
Self-citationKim, H., Kim, D., Jang, H., Kim, D. R., & Lee, K.-S. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.02.020 · Cited by 53
Self-citationNumerical simulation of frosting behavior and its effect on a direct-contact ambient air vaporizer
Kuang, Y.-W., Yi, C., & Wang, W. (2015) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2015.06.042 · Cited by 45
Hu, B., Wang, X., Cao, F., He, Z., & Xing, Z. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.07.017 · Cited by 50
Robust predictive models for estimating frost deposition on horizontal and parallel surfaces
Zendehboudi, A., & Li, X. (2017) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2017.05.013 · Cited by 49
Liu, S., Jiao, W., Ren, L., & Tian, X. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.10.072 · Cited by 49
Liu, X., Yu, J., & Yan, G. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114634 · Cited by 47
Experimental investigation of frost retardation for superhydrophobic surface using a luminance meter
Kim, D., Kim, H., Kim, S. W., Kim, D. R., & Lee, K.-S. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.04.042 · Cited by 46
Self-citationKim, K., Kim, D. R., & Lee, K.-S. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.05.027 · Cited by 46
Self-citationControl strategy and experimental study on a novel defrosting method for air-source heat pump
Liang, C., Zhang, X., Li, X., & Chen, Z. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2009.12.022 · Cited by 44
A Semi-Empirical Model for Predicting Frost Properties
Li, S.-M., Yang, K., & Wang, C. (2021) · Processes · doi:10.3390/pr9030412 · Cited by 43
Experimental study of frost formation on a fin-and-tube heat exchanger by natural convection
Amini, M., Pishevar, A. R., & Yaghoubi, M. (2014) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2014.06.015 · Cited by 40
Tahavvor, A., & Yaghoubi, M. (2010) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2010.06.004 · Cited by 35
Huang, J.-M., Hsieh, W. C., Ke, X.-J., & Wang, C. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.06.020 · Cited by 38
An experimental study on frosting of laminar air flow on a cold surface with local cooling
Kwon, J.-T., Lim, H. J., Kwon, Y.-C., Koyama, S., Kim, D.-H., & Kondou, C. (2006) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2005.12.009 · Cited by 35
Moradkhani, M. A., Hosseini, S. H., Valizadeh, M., & Song, M. (2021) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2021.105667 · Cited by 34
Sommers, A., Napora, A., Truster, N., Caraballo, E., & Hermes, C. (2017) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2016.10.025 · Cited by 32
Moradkhani, M. A., Hosseini, S. H., Shangwen, L., & Song, M. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119258 · Cited by 33
Chen, G., Deng, X., Zhang, G., & Yan, X. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.12.133 · Cited by 31
Modeling of the frost deposition by natural convection on horizontal ultra-low-temperature surfaces
Zendehboudi, A., & Hosseini, S. H. (2019) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-019-08087-x · Cited by 26
Byun, S., Jeong, H., Hyeon, S., & Lee, K.-S. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.111186 · Cited by 31
Self-citationWei, W.-Z., Guo, Y.-T., Wang, W., Jiang, Z., Zhang, X., Dai, C.-M., Sun, Y.-Y., Li, B., Wang, S.-Q., & Zhang, C.-X. (2026) · Energy · doi:10.1016/j.energy.2025.139859 · Cited by 34
Evaporator Frosting in Refrigerating Appliances: Fundamentals and Applications
Hermes, C. J. L., Boeng, J., Silva, D. L. D., Knabben, F. T., & Sommers, A. D. (2021) · Energies · doi:10.3390/en14185991 · Cited by 31
Real-time frost porosity detection using capacitance sensing approach
Shen, Y., & Wang, X.-F. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.060 · Cited by 26
Hosseini, S. H., Moradkhani, M., Valizadeh, M., & Ahmadi, G. (2021) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2020.12.035 · Cited by 25
Hosseini, S. H., Rezaei, M. J., Bag‐Mohammadi, M., Zendehboudi, A., & Ahmadi, G. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.11.022 · Cited by 26
Characteristics of frost formation on two-dimensional fins and its empirical correlations
Kim, K., Kim, J.-S., & Lee, K.-S. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.02.043 · Cited by 25
Self-citationLocal frost behaviors of a scaled-up louvered fin heat exchanger
Park, J.-S., Kim, D. R., & Lee, K.-S. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.06.025 · Cited by 24
Self-citationReview and prospect of air source heat pump research: A bibliometric insight
Jiang, S., Zhao, H., & Ni, L. (2024) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2024.11.029 · Cited by 20
A novel defrosting control strategy with image processing technique and fractal theory
Miao, H.-F., Yang, X., Yin, D.-Z., Zheng, W.-D., Zhang, H., Zhang, S., & Liu, Z. (2022) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2022.03.002 · Cited by 24
Experimental study of the characteristic of frosting on low-temperature air cooler
Haijie, Q., Li, W., Bo, D., Zhihai, Z., & Weiying, Z. (2014) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2014.02.021 · Cited by 22
Chen, J., Wu, J., He, J., & Guo, Z. (2022) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2021.11.008 · Cited by 20
Ren, L.-M., Jiao, W., Tian, G., Tian, X.-H., & Liu, S.-S. (2021) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2021.04.035 · Cited by 15
Liang, X.-Y., & Wu, L. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.112366 · Cited by 18
Modeling and Analysis of Frost Growth in Pilot-Scale Ambient Air Vaporizer
Lee, Y.-K., Park, J., & Han, C. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b03480 · Cited by 19
Lai, T., Ding, P., Dong, X., Zhang, B., Chen, X., & Hou, Y. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115075 · Cited by 18
Farzaneh, M., Zgheib, N., Sherif, S. A., & Balachandar, S. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123233 · Cited by 18
Experimental investigation of frost formation on a horizontal cold cylinder under cross flow
Barzanoni, Y., Noorshams, O., Tabrizi, H., & Damangir, E. (2011) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2011.02.011 · Cited by 16
General correlation for frost thermal conductivity on parallel surface channels
Hosseini, S. H., Valizadeh, M., Zendehboudi, A., & Song, M. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110282 · Cited by 17
Analysis of Thermal Conductivity of Frost on Cryogenic Finned-tube Vaporizer Using Fractal Method
Chen, S.-P., Yao, S.-T., & Xie, F.-S. (2013) · Energy and Power Engineering · doi:10.4236/epe.2013.54b021 · Cited by 13
Schmiesing, N. C., & Sommers, A. (2017) · Science and Technology for the Built Environment · doi:10.1080/23744731.2017.1333876 · Cited by 17
Yang, X., Liu, X., Dong, X.-J., Meng, Y., Hou, Y., & Lai, T.-W. (2022) · Energy Storage and Saving · doi:10.1016/j.enss.2022.05.001 · Cited by 16
Rapid deposition analysis of inhaled aerosols in human airways
Sadafi, H., Backer, W. D., Krestin, G., & Backer, J. D. (2024) · Scientific Reports · doi:10.1038/s41598-024-75578-9 · Cited by 16
A predictive model of frost formation on leaf surface and estimation of frost amount
Song, H., & Hu, Y.-G. (2023) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2023.102789 · Cited by 14
Moradkhani, M. A., Gao, R., Hosseini, S. H., & Song, M. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.122090 · Cited by 15
Frost layer thickness measurement and calculation: A short review
Song, M., Dang, C., Liu, S.-C., Sun, Z.-L., & Mao, N. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.12.281 · Cited by 13
Zhang, W., Li, W., & Hrnjak, P. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121892 · Cited by 13
Experimental Study of Frost Growth Characteristics on Surface of Fin-tube Heat Exchanger
Liping, X., Xianmin, G., & Xing, Z. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1039 · Cited by 13
EFFECTIVE THERMAL CONDUCTIVITY OF FROST CONSIDERINGMASS DIFFUSION AND EDDY CONVECTION
Kandula, M. (2010) · Special Topics & Reviews in Porous Media - An International Journal · doi:10.1615/specialtopicsrevporousmedia.v1.i4.40 · Cited by 10
Correlation for frost properties on a cold cylinder surface in cross flow
Barzanoni, Y., Tabrizi, H. B., Noorshams, O., & Eftekhari, H. (2012) · Heat and Mass Transfer · doi:10.1007/s00231-012-0993-y · Cited by 10
Juhola, V., Mikkola, V., Inkeri, E., Kabelac, S., & Tynjälä, T. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.127396 · Cited by 9
Experimental investigation on thermal conductivity of cryogenic frost under forced convection
Jeong, H., Son, H., Byun, S., Hyeon, S., Lee, K.-S., & Kim, D. R. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.124504 · Cited by 9
Self-citationAn intelligent strategy for phase change heat and mass transfer: Application of machine learning
Khodakarami, S., Suh, Y., Won, Y., & Miljkovic, N. (2023) · Advances in heat transfer · doi:10.1016/bs.aiht.2023.05.002 · Cited by 9
An experimental study of heat transfer on a tube bank under frost formation conditions
Ramírez-Hernández, H. G., Sánchez-Cruz, F. A., Solorio-Ordaz, F., & Martínez-Martínez, S. (2019) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2019.01.031 · Cited by 9
Ye, H., Shu, W., Qi, Y., Fang, S., Zhu, S., Jiang, H., Zhi, X., Qiu, L., & Wang, K. (2024) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2024.126355 · Cited by 8
Time scaling of frost accretion and the square-root-of-time rule
Hermes, C., Sommers, A., & Barbosa, J. (2019) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2019.104281 · Cited by 8
Prediction of heat and mass transfer inside 3D frost microstructure
Mao, N., Nishimura, K., Gong, J., Takayashiki, M., Ściążko, A., Komatsu, Y., Tang, J., & Shikazono, N. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.122978 · Cited by 7
Adanur, B., Cremaschi, L., & Harges, E. (2019) · Science and Technology for the Built Environment · doi:10.1080/23744731.2019.1648981 · Cited by 8
Byun, S., Won, J., Song, J., Jeong, H., & Lee, K.-S. (2025) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2025.108588 · Cited by 6
Self-citationDevelopment of a humidity pretreatment method for the measurement of ozone in ambient air.
Dinh, T., Kim, D.-J., Lee, J.-Y., Park, B.-G., Choi, I., Kim, I.-Y., & Kim, J.-C. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.128108 · Cited by 4
Simulation of Forced Convection Frost Formation in Microtubule Bundles at Ultra-Low Temperature
Mi, Y., Liu, M., Wu, H., Wang, J., & Zhao, R.-K. (2022) · Aerospace · doi:10.3390/aerospace9100630 · Cited by 5
Lai, T.-W., Liu, X., Dong, X.-J., Qiang, M.-C., Yan, S.-H., & Hou, Y. (2022) · Social Science Research Network · doi:10.3390/app12084025 · Cited by 6
Frost Layer Growth Based on High-Resolution Image Analysis
Janssen, D., Mohs, W. F., & Kulacki, F. A. (2016) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4032536 · Cited by 5
Ultra-efficient and ultra-rapid solar cell de-icing and de-snowing
Khodakarami, S., Li, L., & Miljkovic, N. (2021) · doi:10.1117/12.2598078 · Cited by 5
Boeng, J., & Stahelin, R. (2025) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2025.127327 · Cited by 6
A Non-Restrictive Solution to Frost Growth and Densification on Flat Surfaces
Hollon, D., Truster, N., Byrd, L. W., Román, A. J., & Wolff, M. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.124578 · Cited by 4
Li, S., Lin, B., Bai, X., Wei, P., Wang, L., & Zhang, R. (2025) · Energies · doi:10.3390/en18020302 · Cited by 4
Correlation of Critical Air Temperature for Frost Delay on a Cold Plate
Kim, J.-S., Kim, Y.-Y., Kim, O.-J., & Lee, K.-S. (2006) · Transactions of the Korean Society of Mechanical Engineers B · doi:10.3795/ksme-b.2006.30.12.1188 · Cited by 4
Self-citationEffect of frost on phosphorescence for thermographic phosphor thermometry
Kim, D., Kim, M., & Kim, K. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa8894 · Cited by 4
Kim, S.-J., Choi, H.-J., Ha, M.-Y., Kim, S.-R., & Bang, S.-W. (2010) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-010-0211-0 · Cited by 3
Recent advances in modelling of frost formation for mechanical systems
Tao, Y. (2025) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2024.0369 · Cited by 3
The effect of surface wettability on frost growth and densification on flat plates
ElCheikh, A. (2013) · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign) · Cited by 3
(2015) · Cited by 3
Metadata
- Authors
- Yang, D.-K., & Lee, K.-S.
- Affiliations
- Hanyang University (KR)
- Corresponding author
- Lee, Kwan-Soo
- ORCID
- Lee, Kwan-Soo
- Venue
- International Journal of Refrigeration
- Publisher
- Elsevier BV
- Published
- 2004-01
- Volume
- 27
- Issue
- 1
- Pages
- 89-96
- ISSN
- 0140-7007 (ISSN-L)
- OpenAlex
- W2091126511
- Cited by
- 134
- References
- 19
- Citations by year
- 2026: 7 · 2025: 11 · 2024: 8 · 2023: 6 · 2022: 14 · 2021: 10 · 2020: 3 · 2019: 9 · 2018: 4 · 2017: 10 · 2016: 8 · 2015: 6 · 2014: 9 · 2013: 4 · 2012: 3
- FWCI
- 5.35
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- International Journal of Refrigeration (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Refrigeration and Air Conditioning Technologies
- Physical Sciences › Engineering › Aerospace Engineering › Icing and De-icing Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Optimization
- Keywords
- frost formation, dimensionless correlation, frost thickness, frost density, effective thermal conductivity, heat transfer coefficient, mass transfer coefficient, air velocity, absolute humidity, dimensional analysis, frost prediction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
