The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Design Considerations for a Contactless Electric Vehicle Battery Charger
Abstract
This paper overviews theoretical and practical design issues related to inductive power transfer systems and verifies the developed theory using a practical electric vehicle battery charger. The design focuses on the necessary approaches to ensure power transfer over the complete operating range of the system. As such, a new approach to the design of the primary resonant circuit is proposed, whereby deviations from design expectations due to phase or frequency shift are minimized. Of particular interest are systems that are neither loosely nor tightly coupled. The developed solution depends on the selected primary and secondary resonant topologies, the magnetic coupling coefficient, and the secondary quality factor.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stability and control of inductivelycoupled power transfer systems
Boys, J. T., Covic, G. A., & Green, A. W. (2000) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20000017 · Cited by 559
Self-citationA contactless electrical energy transmission system for portable-telephone battery chargers
Jang, Y., & Jovanovic, M. M. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.812472 · Cited by 484
Design of loosely coupled inductive power transfer systems
Stielau, O. H., & Covic, G. A. (2002) · PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409) · doi:10.1109/icpst.2000.900036 · Cited by 328
Self-citationThe design of a contact-less energy transfer system for a people mover system
Covic, G. A., Elliott, G., Stielau, O. H., Green, R. M., & Boys, J. T. (2002) · PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409) · doi:10.1109/icpst.2000.900035 · Cited by 165
Self-citationContactless power and information transmission
Bieler, T. R., Perrottet, M., Nguyễn, V. Đ., & Perriard, Y. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.803017 · Cited by 146
A multi-resonant converter for non-contact charging with electromagnetic coupling
Laouamer, R., Brunello, M., Ferrieux, J.-P., Normand, O., & Buchheit, N. (2002) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.1997.671998 · Cited by 90
Cited by
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118
Wireless Power Transfer for Electric Vehicle Applications
Li, S., & Mi, C. C. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2319453 · Cited by 2,185
Wireless Power Transfer—An Overview
Zhang, Z., Pang, H., Georgiadis, A., & Cecati, C. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835378 · Cited by 1,723
Development of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging Systems
Budhia, M., Boys, J. T., Covic, G. A., & Huang, C.-Y. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2179274 · Cited by 1,273
Self-citationModern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
Self-citationCovic, G. A., & Boys, J. T. (2013) · Proceedings of the IEEE · doi:10.1109/jproc.2013.2244536 · Cited by 1,223
Self-citationA Double-Sided LCC Compensation Network and Its Tuning Method for Wireless Power Transfer
Li, S., Li, W., Deng, J., Nguyen, T. D., & Mi, C. C. (2015) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2014.2347006 · Cited by 1,091
Design and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer Systems
Budhia, M., Covic, G. A., & Boys, J. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143730 · Cited by 1,039
Self-citationCompensation Topologies of High-Power Wireless Power Transfer Systems
Zhang, W., & Mi, C. C. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2015.2454292 · Cited by 992
Wireless Power Transfer for Vehicular Applications: Overview and Challenges
Patil, D., McDonough, M. K., Miller, J. M., Fahimi, B., & Balsara, P. T. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2780627 · Cited by 991
Shin, J., Shin, S., Kim, Y., Ahn, S., Lee, S., Jung, G., Jeon, S.-J., & Cho, D.-H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2258294 · Cited by 856
Modern Advances in Wireless Power Transfer Systems for Roadway Powered Electric Vehicles
Mi, C. C., Buja, G., Choi, S. Y., & Rim, C. T. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2574993 · Cited by 841
A Bidirectional Inductive Power Interface for Electric Vehicles in V2G Systems
Madawala, U. K., & Thrimawithana, D. J. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2114312 · Cited by 813
Un-Noor, F., Padmanaban, S., Mihet-Popa, L., Mollah, M., & Hossain, E. (2017) · Energies · doi:10.3390/en10081217 · Cited by 809
Optimal Design of ICPT Systems Applied to Electric Vehicle Battery Charge
Sallan, J., Villa, J. L., Llombart, A., & Sanz, J. F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2015359 · Cited by 734
Advances in Wireless Power Transfer Systems for Roadway-Powered Electric Vehicles
Choi, S. Y., Gu, B. W., Jeong, S. Y., & Rim, C. T. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2343674 · Cited by 682
Electrical Motor Drivelines in Commercial All-Electric Vehicles: A Review
de Santiago, J., Bernhoff, H., Ekergård, B., Eriksson, S., Ferhatovic, S., Waters, R., & Leijon, M. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2011.2177873 · Cited by 669
Narrow-Width Inductive Power Transfer System for Online Electrical Vehicles
Huh, J., Lee, S. W., Lee, W. Y., Cho, G. H., & Rim, C. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160972 · Cited by 669
Dai, J., & Ludois, D. C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2415253 · Cited by 638
Khaligh, A., & Dusmez, S. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2213104 · Cited by 630
Li, H., Li, J., Wang, K., Chen, W., & Yang, X. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2349534 · Cited by 592
Imura, T., & Hori, Y. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2112317 · Cited by 581
Low, Z. N., Chinga, R. A., Tseng, R., & Lin, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2010110 · Cited by 528
Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review
Mahesh, A., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3116678 · Cited by 513
A High Efficiency 5 kW Inductive Charger for EVs Using Dual Side Control
Wu, H. H., Gilchrist, A., Sealy, K. D., & Bronson, D. (2012) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2192283 · Cited by 512
Zhang, W., Wong, S.-C., Tse, C. K., & Chen, Q. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2249112 · Cited by 505
Beh, T. C., Kato, M., Imura, T., Oh, S., & Hori, Y. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2206337 · Cited by 502
Advanced Integrated Bidirectional AC/DC and DC/DC Converter for Plug-In Hybrid Electric Vehicles
Lee, Y.-J., Khaligh, A., & Emadi, A. (2009) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2009.2028070 · Cited by 476
Qu, X., Han, H., Wong, S.-C., Tse, C. K., & Chen, W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2396471 · Cited by 474
Vu, V.-B., Tran, D.-H., & Choi, W. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2766605 · Cited by 450
A Three-Phase Inductive Power Transfer System for Roadway-Powered Vehicles
Covic, G. A., Boys, J. T., Kissin, M. L. G., & Lu, H. G. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.904025 · Cited by 439
Self-citationDiekhans, T., & De Doncker, R. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2393912 · Cited by 421
The Circuit Theory Behind Coupled-Mode Magnetic Resonance-Based Wireless Power Transmission
Kiani, M., & Ghovanloo, M. (2012) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2011.2180446 · Cited by 421
Overview of wireless power transfer technologies for electric vehicle battery charging
Musavi, F., & Eberle, W. (2014) · IET Power Electronics · doi:10.1049/iet-pel.2013.0047 · Cited by 417
Review of static and dynamic wireless electric vehicle charging system
Panchal, C., Stegen, S., & Lu, J. (2018) · Engineering Science and Technology, an International Journal · doi:10.1016/j.jestch.2018.06.015 · Cited by 414
Zhang, W., Wong, S.-C., Tse, C. K., & Chen, Q. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2273364 · Cited by 406
Effect of Coupling Between Multiple Transmitters or Multiple Receivers on Wireless Power Transfer
Ahn, D., & Hong, S. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2196902 · Cited by 382
Comparison Study on SS and Double-Sided LCC Compensation Topologies for EV/PHEV Wireless Chargers
Li, W., Zhao, H., Deng, J., Li, S., & Mi, C. C. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2015.2479938 · Cited by 375
Economic Analysis of the Dynamic Charging Electric Vehicle
Jeong, S., Jang, Y. J., & Kum, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2424712 · Cited by 374
A Unity-Power-Factor IPT Pickup for High-Power Applications
Keeling, N. A., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2027255 · Cited by 371
Self-citationZaheer, A., Hao, H., Covic, G. A., & Kacprzak, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2329693 · Cited by 371
Self-citationAdvances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
Wireless power transfer techniques for implantable medical devices: a review
Khan, S. R., Pavuluri, S. K., Cummins, G., & Desmulliez, M. P. Y. (2020) · Sensors · doi:10.3390/s20123487 · Cited by 355
A Study on Magnetic Field Repeater in Wireless Power Transfer
Ahn, D., & Hong, S. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2188254 · Cited by 351
Grid-Connected Integrated Battery Chargers in Vehicle Applications: Review and New Solution
Haghbin, S., Lundmark, S., Alakula, M., & Carlson, O. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2187414 · Cited by 345
Design and Experimentation of WPT Charger for Electric City Car
Buja, G., Bertoluzzo, M., & Mude, K. N. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2455524 · Cited by 342
Song, K., Li, Z., Jiang, J., & Zhu, C. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2767099 · Cited by 337
Analysis and Tracking of Optimal Load in Wireless Power Transfer Systems
Fu, M., Yin, H., Zhu, X., & Ma, C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2347071 · Cited by 330
A Review on Electric Vehicle Charging Infrastructure Development in the UK
Chen, T., Zhang, X.-P., Wang, J., Li, J., Wu, C., Hu, M., & Bian, H. (2020) · Journal of Modern Power Systems and Clean Energy · doi:10.35833/mpce.2018.000374 · Cited by 315
ZCS $LCC$-Compensated Resonant Inverter for Inductive-Power-Transfer Application
Pantic, Z., Bai, S., & Lukic, S. M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2081954 · Cited by 305
A critical review on wireless charging for electric vehicles
Machura, P., & Li, Q. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.01.027 · Cited by 295
A Cascaded Boost–Buck Converter for High-Efficiency Wireless Power Transfer Systems
Fu, M., Ma, C., & Zhu, X. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2013.2291682 · Cited by 272
Qu, X., Yu, Y., Zhou, M., Lin, C.-T., & Wang, X. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114030 · Cited by 271
Contactless Energy Transfer System With FPGA-Controlled Resonant Converter
Moradewicz, A. J., & Kazmierkowski, M. P. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2051395 · Cited by 270
An Optimizable Circuit Structure for High-Efficiency Wireless Power Transfer
Chen, L., Liu, S., Zhou, Y. C., & Cui, T. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2179275 · Cited by 263
Wireless Charging Techniques for UAVs: A Review, Reconceptualization, and Extension
Lu, M., Bagheri, M., James, A. P., & Phung, T. (2018) · IEEE Access · doi:10.1109/access.2018.2841376 · Cited by 257
A Comparative Study of Power Supply Architectures in Wireless EV Charging Systems
Esteban, B., Sid-Ahmed, M., & Kar, N. C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2440256 · Cited by 256
Reflexive Field Containment in Dynamic Inductive Power Transfer Systems
Lee, K., Pantic, Z., & Lukic, S. M. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2287262 · Cited by 173
Kim, J., Kim, D.-H., & Park, Y.-J. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2365751 · Cited by 152
A Figure-of-Merit for Designing High-Performance Inductive Power Transmission Links
Kiani, M., & Ghovanloo, M. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2227914 · Cited by 146
Inductive coupling for wireless power transfer and near-field communication
Degen, C. (2021) · EURASIP Journal on Wireless Communications and Networking · doi:10.1186/s13638-021-01994-4 · Cited by 47
A Design Methodology for Flat Pick-up ICPT Systems
Elliott, G. A. J., Boys, J. T., & Covic, G. A. (2006) · 2006 1ST IEEE Conference on Industrial Electronics and Applications · doi:10.1109/iciea.2006.257165 · Cited by 39
Self-citationA review on unidirectional converters for on-board chargers in electric vehicle
Vijayakumar, S., & Sudhakar, N. (2022) · Frontiers in Energy Research · doi:10.3389/fenrg.2022.1011681 · Cited by 26
“It has advantages of safety, convenience, flexibility, weather immunity, and the possibility of range extensions (Wang et al., 2005; Khaligh and Dusmez, 2012).”
BackgroundA Flexible PV-Powered Battery-Charging Scheme for Electric Vehicles
Sharaf, A. M., & Şahin, M. E. (2017) · IETE Technical Review · doi:10.1080/02564602.2016.1155420 · Cited by 18
Metadata
- Authors
- Wang, C.-S., Stielau, O. H., & Covic, G. A.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2005-10
- Volume
- 52
- Issue
- 5
- Pages
- 1308-1314
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2163108953
- Cited by
- 1,487
- References
- 6
- FWCI
- 7.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.